Online product reviews and comparisons for Zombidle 3d printer.
- Fine sizes assorted - 0.15 mm, 0.25 mm, 0.35mm, 0.4 mm and 0.5 mm cleaning needles not only suitable for most of sizes nozzle but also they can use for cleaning other small parts, such as throat and feeder gear
- Premium material - SIQUK 3D printer nozzle cleaners are made of premium stainless steel material, sturdy, durable and flexible, easy to twist
- Wide compatibility - compatible with most of 3D printers extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap
- Free gift - come with 2 different shape precision tweezers and 1 piece cleaning cloth, help you cleaning excess filament gear material and keep nozzles clean
- Package include - there are 30 pieces 3D printer nozzle cleaning needles in 5 different size, 2 pieces different sharpe precision tweezers and 1 piece cleaning cloth, totally 33 pieces nozzle cleaning kit
- Maximum printing speed: 150mm/S. Maximum moving speed: 250mm/S. Printing size: 220*220*250mm. Layer thickness accuracy: 0.1mm. The diameter of the consumable: 1.75mm. Nozzle diameter: 0.4mm.
- Full color touch screen design, simple and convenient to operate, and can quickly heat the AC hot bed. Direct drive extruder for supporting flexible materials.
- Double Z-axis synchronous design, high-speed movement is more stable. High-precision magnetic limit switch for more precise positioning. Ultra-quiet progressive drive, no noise.
- If the power is cut off unexpectedly during printing, accurate printing can continue after the power is turned on. Fast heating, up to 110° in 130 seconds.
- High-precision belt guide pulley. Patented coupler. Rigid coupling. Waterproof switch, safe power supply. With CE/FC certification.
- Metal construction with PTFE liner inside, good for ABS, PLA and other conventional print materials
- 12V 40W heater, 12V high speed fan with shroud, NTC 3950 pre-wired thermistor
- RepRap 3D printer extruder hotend compatible with E3D V6 1.75mm / 0.4mm
- Easy No-Solder, No-Tape, No-Adhesive assembly and maintenance.
- The bowden tube can be removed to be used for a direct drive extruder
- BLTouch Auto Bed Leveling Sensor: It can precisely measure the tilt of hot bed surface and offers Z axis leveling compensation. Saving your time and reducing waste.
- Equipped with Two Lead Screws on Z Axis: The hot bed was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of failure and fewer headaches
- Dual Y Axis Motors: Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing.
- Easy to Assemble and Operate: Ender 5 Plus uses touch color screen for easy and quick operation. It comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic construction of 3D printer.
- Extra Glass Plate: Add a tempered glass plate on the heated bed, which makes models are easier to be removed. It also makes the hot bed more flat and provide all-around production.
- Nozzle Assembly for Flashforge Dreamer
- 【EXCELLENT PERFORMANCE】Our worm gear reducer motors are made of excellent materials, fall resistant, wear-resistant, durable, long service life, we guarantee the product quality and everyone's experience in the process of use
- 【LONG SERVICE LIFE】Our 3D printers are all made of excellent materials. They are strictly controlled in the manufacturing process and guaranteed in quality. Therefore, they have a long working life and can save more time and money
- 【HIGH COST PERFORMANCE】The price of our printer is more affordable. Compared with other printers, our quality is better and the price is more favorable. We strictly control all aspects, so we have high cost performance
- 【SPECIFICATION】Voltage: AC115v-240v, Printing Range: 300 x 300 x 400mm, Printing Thick Bottom: 0.1-0.4mm, Printing Accuracy: ±0.1mm, Nozzle Diameter: 0.2-0.8mm, Power: 350w, Hot Bed Temperature: ≤110℃, Nozzle Temperature: ≤260℃, Printing Speed: ≤180mm/s, Normal Printing Speed: 30-60mm/s
- 【LOW NOISE】With high-quality design, the nozzle can slide smoothly when working, with low noise, high efficiency, good use experience, and simple structure, good operation, not difficult, suitable for most scenes
- 【Smart and Fast Slicing Software】ELEGOO Mars comes with the latest version of CHITUBOX Slicing Software which gives you extraordinary user experience. CHITUBOX takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes.
- 【Resin saving and Better Printing】CHITUBOX allows you to hollow out your model before slicing which could save your resin dramatically during photocuring process. Equiped with 40W UV lights and using ELEGOO resin, you can get a better pritning result.
- 【Smart and Convenient】3.5'' inch color touch screen equipped with the latest ELEGOO ChiTu 5.0 system makes it very easy for off-line printing. The build platform with steel ball balancing structure inside allows you to start printing within 5 minutes after assembly.
- 【High Precision and Resolution】ELEGOO Mars uses a 2560x1440 2K HD masking LCD as to provide accurate printing with XY axis resolution of 0.00185inches / 0.047mm
- 【Warranty and Service】We provide total one-year machine warranty, and 3 month warranty for FEP and 2K LCD (consumable parts). If you have any questions regarding product operation or software please feel free to contact us. Have a look at the video of the introducing of our MARS here: https://www.youtube.com/watch?v=y3DO-Wbwju8 and other helpful videos from our channel: https://www.youtube.com/channel/UCVpdrdIwslr7vVdPNYID9rA
Buy Zombidle 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.
Don't miss out on the promotions for Zombidle 3d printer, buy Zombidle 3d printer directly online and enjoy big saving on your purchases.
On this page you will find the list of the best Zombidle 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).
Overview
- Reviews: Zombidle 3d printer
- Pricing: Zombidle 3d printer
- Promotions and Deals: Zombidle 3d printer
- Cost: Zombidle 3d printer
- Catalog: Zombidle 3d printer
- Where to buy: Zombidle 3d printer
- Discount Coupon: Zombidle 3d printer
- Similar Products: Zombidle 3d printer
- 【Fast Printing and less maintenance】Mars 2 comes with a 6.08 inch monochrome LCD of 2K HD resolution and only takes 2 seconds per layer exposure to cure resin, which could significantly enhance your printing efficiency. Mono LCD has a much longer lifespan and stable performance during long term printing, thus saves your cost.
- 【Outstanding prints and ultra accurcy】Brand new light source structure provides more even UV light emission and working together with 2K mono LCD, the printing details and precision are greatly improved and the 3D printed models are fascinating.
- 【Sturdy build quality】CNC machined aluminum body makes Mars 2 a very formidable machine. Newly-designed sandblasted build plate has a much stronger adherence during printing and enables consistent printing success. Built-in active carbon could absorb the fume of resin and offer you a refreshing printing experience.
- 【Multi language interface】Mars 2 now supports 12 kinds of languages so customers across the world could operate the 3D printer more conveniently without barries.The newly added 10 languages are Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish and Portuguese.
- 【Warranty and Service】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded).
- E Axis working: The E axis motor will start work when the nozzle temperature reaches over 185℃, then before starting printing, please remember to heat the nozzle temperature first.
- Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs can be assembled in just 2 hours.
- Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
- Strict Test: Strict testing for key components before delivery and life-time technical supports available.
- Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110℃.
- Like silk, it retains the shiny silky smooth appearance of the foundation and adds an extra metallic luster to it
- PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
- 1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
- 1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
- The fixed color scheme makes it clearer when thinking about color of the prints. Purple--red copper--green--sand yellow--purple blue--ice blue--bronze--orange--rose red--light purple
- E Axis working: The E axis motor will start work when the nozzle temperature reaches over 185℃, then before starting printing, please remember to heat the nozzle temperature first.
- Easy and quick assembly: It is assembled with a few parts, 20 screws can be assembled in just 2 hours.
- Extrusion reduces the risk of clogging and poor displacement; V-shape with POM wheels make moving noiseless, smooth and constant.
- Strict test: 24 hours for key components before delivery and real-time technical support. Secure power supply guaranteed. Culture medium reaches 110 ℃ in just 5 minutes.
- Note: As an authorized manufacturer, we, Comgrow, offer you 100% Creality 3 printers as well as technical support.
- 【New Version】 Ender-3 PRO is an upgraded version of Ender-3, comes with the Meanwell power supply and new platform sticker, also redesigned the aluminum extrusion. The Ender-3 PRO boasts the same outstanding performance as the Ender-3, upgraded components make Ender-3 PRO more stable, durable and more comfortable to operate.
- 【MeanWell Power Supply】 The power supply is now from Mean Well, a brand known for its reliability in electronics for over 35 years.The brand power supply delivers more power with a stable output ensuring the temperature fluctuations are minimized, especially during long and intensive prints. Heat the hotbed faster and to higher temperatures before making the Ender 3 Pro a much better option for printing ABS and other high-temperature high strength filaments.
- 【More Stable】 Redesigned with a much more sturdy, 40x40 aluminum extrusion for the Y-axis base. This provides stability for the printing process, leading to better print quality.Also, better bearing wheels deliver more stiffness, reduce friction, and give overall better dimensional stability. This and some broad rubber feet also help to reduce the noise level.
- 【Superior Printing Surface】 A new state of the art “C-MAG” magnetic sticker is designed for Ender-3 PRO, it is entirely removable, flexible and can better adhere to the platform. Once the model is finished printing, remove the magnetic upper from the lower and bend or flex the print surface to watch the model effortlessly pop off the printing surface.
- 【What You Get】Ceality Ender 3 Pro 3D pinrter, lifetime professional technical assistance and 24 hours professional customer service.
Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.
We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).
We have categorized the products in order to show the most popular and best sellers.
Zombidle 3d printer
Here is the ranking of the best Zombidle 3d printer, click to see reviews, details and active promotions:
Visit our section devoted to providing consumer opinions on Zombidle 3d printer and read the reviews left by real customers, see the Zombidle 3d printer ranking and find the store where to buy at the lowest price.
Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.
- This is a hot‑end component for Creality 3D Ender/CR series, a good replacement and repair part.
- Made of all metal, reliable and durable, using full straight throat, not easy to block, and easy to clean.
- The nozzle uses 0.4mm aperture, and can also be adapted for MK8 nozzles with apertures of 0.2/0.3/0.5/0.6/0.8/1.0.
- Exquisite appearance, fine oxidation, heating rod and thermistor mounting holes are aligned, easy to install and use.
- The heating block and the heat sink are fixed by two stainless steel screws, which are stable and not loose, and the heating block will not be reversed when the nozzle is removed.
- This nozzle is made of high quality Ti alloy material, come with high temperature flexibility
- Inner surface is very glossy(not cheap nozzles on the market), so you can print without worrying about jams
- The product is very suitable for high temperature 3D printing that other nozzles cannot handle
- This Ti nozzle can be used for CR‑10 all metal thermal kit and other MK8 MK9 extruder and 3D printer
- For MK8 nozzle is durable, non‑stick, have strong corrosion‑resistant and wear‑resistant
- Easy and convenient for installation and disassemble, reliable and durable to use.
- Nice accessories to upgrade and repair your 3D printer, practical accessory.
- Replace the original extruder kit and help improve the performance of the 3D printer.
- High quality aluminum material manufacturing ensuring maximum durability.
- Come with complete accessories, easy and convenient to assemble.
- Like silk, it retains the shiny silky smooth appearance of the foundation and adds an extra metallic luster to it
- PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
- 1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
- 1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
- The fixed color scheme makes it clearer when thinking about color of the prints. Purple--red copper--green--sand yellow--purple blue--ice blue--bronze--orange--rose red--light purple
- 【Disassembly Recycle Reuse MasterSpool Filament】: Compared with normal filament, SUNLU 1.75mm MasterSpool filament can be loaded and unloaded for the repeat usage, low lost and the solution of the waste of disposable reels, environmental.
- 【1.75MM diameter ±0.02mm】PLA filament diameter is strictly controlled during the manufacturing process, diameter is 1.75mm, dimensional accuracy is +/- 0.02mm, spool is 1KG.
- 【Removable Reel with Filament+ Extra 1KG Refill PLA Filament】: One removable reel and 1KG refill filaments make up “1+1” combination. It is economic way to get your new filaments as you can use your masterspool again and again.
- 【MasterSpool Suitable for Other Spoolless Filament】: Diameter of SUNLU removable MasterSpool is around 80mm while spoolless filament’s is 87mm. Diameter and height of the reel is allowance, which can be reuse for other brand nut filament if diameter is proper.
- 【12 Months Warranty and Friendly After-sales Service】N.W 2KG PLA black+white, Welcome guide,12 months warranty, and friendly after-sales service. Let’s buy it now!
- 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
- 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
- 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
- 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
- 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
- Complete accessories, simple and convenient to install
- The printing range is 300x300x400mm, enough to operate
- Made of excellent materials, with long working life
- Accurate printing, excellent design structure, more suitable for long-time printing
- High quality and great processing, which has high efficiency
- 【EXCELLENT PERFORMANCE】Our worm gear reducer motors are made of excellent materials, fall resistant, wear-resistant, durable, long service life, we guarantee the product quality and everyone's experience in the process of use
- 【LONG SERVICE LIFE】Our 3D printers are all made of excellent materials. They are strictly controlled in the manufacturing process and guaranteed in quality. Therefore, they have a long working life and can save more time and money
- 【HIGH COST PERFORMANCE】The price of our printer is more affordable. Compared with other printers, our quality is better and the price is more favorable. We strictly control all aspects, so we have high cost performance
- 【SPECIFICATION】Voltage: AC115v-240v, Printing Range: 300 x 300 x 400mm, Printing Thick Bottom: 0.1-0.4mm, Printing Accuracy: ±0.1mm, Nozzle Diameter: 0.2-0.8mm, Power: 350w, Hot Bed Temperature: ≤110℃, Nozzle Temperature: ≤260℃, Printing Speed: ≤180mm/s, Normal Printing Speed: 30-60mm/s
- 【LOW NOISE】With high-quality design, the nozzle can slide smoothly when working, with low noise, high efficiency, good use experience, and simple structure, good operation, not difficult, suitable for most scenes
- Strong Compatibility Auto & Manual Leveling:BL touch (Auto Leveling Device) can be added by yourself,enjoying more fun of DIY your own 3d printer.
- Dual Port Fan Cooling Plenum:Dual-port cooling fan extruder, Evenly heat- dissipated and coaling dawn immediately. reducing plugging and poor- spillage ensures models with high quality.
- A New Tough All Metal Frame: High quality V Profile selected, more stable without any vibration,smoothly printed-out with high accuracy.
- Upgraded Ultra Silent Mother Board: Self-developed Industrial-grade Motherboard and TMC2208 Utra Silent Drive are adopted /Cost-effective /Running more stable/ Noise reduction /Compression resistance.
Reviews
On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Zombidle 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Zombidle 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.
- This nozzle is made of high quality Ti alloy material, come with high temperature flexibility
- Inner surface is very glossy(not cheap nozzles on the market), so you can print without worrying about jams
- The product is very suitable for high temperature 3D printing that other nozzles cannot handle
- This Ti nozzle can be used for CR‑10 all metal thermal kit and other MK8 MK9 extruder and 3D printer
- For MK8 nozzle is durable, non‑stick, have strong corrosion‑resistant and wear‑resistant
- 【EXCELLENT PERFORMANCE】Our worm gear reducer motors are made of excellent materials, fall resistant, wear-resistant, durable, long service life, we guarantee the product quality and everyone's experience in the process of use
- 【LONG SERVICE LIFE】Our 3D printers are all made of excellent materials. They are strictly controlled in the manufacturing process and guaranteed in quality. Therefore, they have a long working life and can save more time and money
- 【HIGH COST PERFORMANCE】The price of our printer is more affordable. Compared with other printers, our quality is better and the price is more favorable. We strictly control all aspects, so we have high cost performance
- 【SPECIFICATION】Voltage: AC115v-240v, Printing Range: 300 x 300 x 400mm, Printing Thick Bottom: 0.1-0.4mm, Printing Accuracy: ±0.1mm, Nozzle Diameter: 0.2-0.8mm, Power: 350w, Hot Bed Temperature: ≤110℃, Nozzle Temperature: ≤260℃, Printing Speed: ≤180mm/s, Normal Printing Speed: 30-60mm/s
- 【LOW NOISE】With high-quality design, the nozzle can slide smoothly when working, with low noise, high efficiency, good use experience, and simple structure, good operation, not difficult, suitable for most scenes
- Like silk, it retains the shiny silky smooth appearance of the foundation and adds an extra metallic luster to it
- PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
- 1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
- 1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
- The fixed color scheme makes it clearer when thinking about color of the prints. Purple--red copper--green--sand yellow--purple blue--ice blue--bronze--orange--rose red--light purple
- Strong Compatibility Auto & Manual Leveling:BL touch (Auto Leveling Device) can be added by yourself,enjoying more fun of DIY your own 3d printer.
- Dual Port Fan Cooling Plenum:Dual-port cooling fan extruder, Evenly heat- dissipated and coaling dawn immediately. reducing plugging and poor- spillage ensures models with high quality.
- A New Tough All Metal Frame: High quality V Profile selected, more stable without any vibration,smoothly printed-out with high accuracy.
- Upgraded Ultra Silent Mother Board: Self-developed Industrial-grade Motherboard and TMC2208 Utra Silent Drive are adopted /Cost-effective /Running more stable/ Noise reduction /Compression resistance.
- This is a hot‑end component for Creality 3D Ender/CR series, a good replacement and repair part.
- Made of all metal, reliable and durable, using full straight throat, not easy to block, and easy to clean.
- The nozzle uses 0.4mm aperture, and can also be adapted for MK8 nozzles with apertures of 0.2/0.3/0.5/0.6/0.8/1.0.
- Exquisite appearance, fine oxidation, heating rod and thermistor mounting holes are aligned, easy to install and use.
- The heating block and the heat sink are fixed by two stainless steel screws, which are stable and not loose, and the heating block will not be reversed when the nozzle is removed.
Pricing
The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.
How can you get the best deal? Read and learn in order to select the most convenient offer.
The price is updated every day so you always know how much Zombidle 3d printer actually costs.
- Fine sizes assorted - 0.15 mm, 0.25 mm, 0.35mm, 0.4 mm and 0.5 mm cleaning needles not only suitable for most of sizes nozzle but also they can use for cleaning other small parts, such as throat and feeder gear
- Premium material - SIQUK 3D printer nozzle cleaners are made of premium stainless steel material, sturdy, durable and flexible, easy to twist
- Wide compatibility - compatible with most of 3D printers extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap
- Free gift - come with 2 different shape precision tweezers and 1 piece cleaning cloth, help you cleaning excess filament gear material and keep nozzles clean
- Package include - there are 30 pieces 3D printer nozzle cleaning needles in 5 different size, 2 pieces different sharpe precision tweezers and 1 piece cleaning cloth, totally 33 pieces nozzle cleaning kit
- Maximum printing speed: 150mm/S. Maximum moving speed: 250mm/S. Printing size: 220*220*250mm. Layer thickness accuracy: 0.1mm. The diameter of the consumable: 1.75mm. Nozzle diameter: 0.4mm.
- Full color touch screen design, simple and convenient to operate, and can quickly heat the AC hot bed. Direct drive extruder for supporting flexible materials.
- Double Z-axis synchronous design, high-speed movement is more stable. High-precision magnetic limit switch for more precise positioning. Ultra-quiet progressive drive, no noise.
- If the power is cut off unexpectedly during printing, accurate printing can continue after the power is turned on. Fast heating, up to 110° in 130 seconds.
- High-precision belt guide pulley. Patented coupler. Rigid coupling. Waterproof switch, safe power supply. With CE/FC certification.
- Metal construction with PTFE liner inside, good for ABS, PLA and other conventional print materials
- 12V 40W heater, 12V high speed fan with shroud, NTC 3950 pre-wired thermistor
- RepRap 3D printer extruder hotend compatible with E3D V6 1.75mm / 0.4mm
- Easy No-Solder, No-Tape, No-Adhesive assembly and maintenance.
- The bowden tube can be removed to be used for a direct drive extruder
- BLTouch Auto Bed Leveling Sensor: It can precisely measure the tilt of hot bed surface and offers Z axis leveling compensation. Saving your time and reducing waste.
- Equipped with Two Lead Screws on Z Axis: The hot bed was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of failure and fewer headaches
- Dual Y Axis Motors: Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing.
- Easy to Assemble and Operate: Ender 5 Plus uses touch color screen for easy and quick operation. It comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic construction of 3D printer.
- Extra Glass Plate: Add a tempered glass plate on the heated bed, which makes models are easier to be removed. It also makes the hot bed more flat and provide all-around production.
- Nozzle Assembly for Flashforge Dreamer
- 【EXCELLENT PERFORMANCE】Our worm gear reducer motors are made of excellent materials, fall resistant, wear-resistant, durable, long service life, we guarantee the product quality and everyone's experience in the process of use
- 【LONG SERVICE LIFE】Our 3D printers are all made of excellent materials. They are strictly controlled in the manufacturing process and guaranteed in quality. Therefore, they have a long working life and can save more time and money
- 【HIGH COST PERFORMANCE】The price of our printer is more affordable. Compared with other printers, our quality is better and the price is more favorable. We strictly control all aspects, so we have high cost performance
- 【SPECIFICATION】Voltage: AC115v-240v, Printing Range: 300 x 300 x 400mm, Printing Thick Bottom: 0.1-0.4mm, Printing Accuracy: ±0.1mm, Nozzle Diameter: 0.2-0.8mm, Power: 350w, Hot Bed Temperature: ≤110℃, Nozzle Temperature: ≤260℃, Printing Speed: ≤180mm/s, Normal Printing Speed: 30-60mm/s
- 【LOW NOISE】With high-quality design, the nozzle can slide smoothly when working, with low noise, high efficiency, good use experience, and simple structure, good operation, not difficult, suitable for most scenes
- 【Smart and Fast Slicing Software】ELEGOO Mars comes with the latest version of CHITUBOX Slicing Software which gives you extraordinary user experience. CHITUBOX takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes.
- 【Resin saving and Better Printing】CHITUBOX allows you to hollow out your model before slicing which could save your resin dramatically during photocuring process. Equiped with 40W UV lights and using ELEGOO resin, you can get a better pritning result.
- 【Smart and Convenient】3.5'' inch color touch screen equipped with the latest ELEGOO ChiTu 5.0 system makes it very easy for off-line printing. The build platform with steel ball balancing structure inside allows you to start printing within 5 minutes after assembly.
- 【High Precision and Resolution】ELEGOO Mars uses a 2560x1440 2K HD masking LCD as to provide accurate printing with XY axis resolution of 0.00185inches / 0.047mm
- 【Warranty and Service】We provide total one-year machine warranty, and 3 month warranty for FEP and 2K LCD (consumable parts). If you have any questions regarding product operation or software please feel free to contact us. Have a look at the video of the introducing of our MARS here: https://www.youtube.com/watch?v=y3DO-Wbwju8 and other helpful videos from our channel: https://www.youtube.com/channel/UCVpdrdIwslr7vVdPNYID9rA
Promotions and Deals (UK)
During the year there are many promotions on products for sale online and Zombidle 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".
We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).
Cost
Below we have selected a list of Zombidle 3d printer which are among the cheapest on the market. Just scroll through the list to find Zombidle 3d printer the cheapest products.
Catalog
The product Zombidle 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.
Zombidle 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.
The online catalog is updated frequently in order to provide the latest details, product inforomation and price.
- This is a hot‑end component for Creality 3D Ender/CR series, a good replacement and repair part.
- Made of all metal, reliable and durable, using full straight throat, not easy to block, and easy to clean.
- The nozzle uses 0.4mm aperture, and can also be adapted for MK8 nozzles with apertures of 0.2/0.3/0.5/0.6/0.8/1.0.
- Exquisite appearance, fine oxidation, heating rod and thermistor mounting holes are aligned, easy to install and use.
- The heating block and the heat sink are fixed by two stainless steel screws, which are stable and not loose, and the heating block will not be reversed when the nozzle is removed.
- This nozzle is made of high quality Ti alloy material, come with high temperature flexibility
- Inner surface is very glossy(not cheap nozzles on the market), so you can print without worrying about jams
- The product is very suitable for high temperature 3D printing that other nozzles cannot handle
- This Ti nozzle can be used for CR‑10 all metal thermal kit and other MK8 MK9 extruder and 3D printer
- For MK8 nozzle is durable, non‑stick, have strong corrosion‑resistant and wear‑resistant
- Easy and convenient for installation and disassemble, reliable and durable to use.
- Nice accessories to upgrade and repair your 3D printer, practical accessory.
- Replace the original extruder kit and help improve the performance of the 3D printer.
- High quality aluminum material manufacturing ensuring maximum durability.
- Come with complete accessories, easy and convenient to assemble.
- Like silk, it retains the shiny silky smooth appearance of the foundation and adds an extra metallic luster to it
- PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
- 1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
- 1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
- The fixed color scheme makes it clearer when thinking about color of the prints. Purple--red copper--green--sand yellow--purple blue--ice blue--bronze--orange--rose red--light purple
- 【Disassembly Recycle Reuse MasterSpool Filament】: Compared with normal filament, SUNLU 1.75mm MasterSpool filament can be loaded and unloaded for the repeat usage, low lost and the solution of the waste of disposable reels, environmental.
- 【1.75MM diameter ±0.02mm】PLA filament diameter is strictly controlled during the manufacturing process, diameter is 1.75mm, dimensional accuracy is +/- 0.02mm, spool is 1KG.
- 【Removable Reel with Filament+ Extra 1KG Refill PLA Filament】: One removable reel and 1KG refill filaments make up “1+1” combination. It is economic way to get your new filaments as you can use your masterspool again and again.
- 【MasterSpool Suitable for Other Spoolless Filament】: Diameter of SUNLU removable MasterSpool is around 80mm while spoolless filament’s is 87mm. Diameter and height of the reel is allowance, which can be reuse for other brand nut filament if diameter is proper.
- 【12 Months Warranty and Friendly After-sales Service】N.W 2KG PLA black+white, Welcome guide,12 months warranty, and friendly after-sales service. Let’s buy it now!
- 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
- 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
- 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
- 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
- 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
- Complete accessories, simple and convenient to install
- The printing range is 300x300x400mm, enough to operate
- Made of excellent materials, with long working life
- Accurate printing, excellent design structure, more suitable for long-time printing
- High quality and great processing, which has high efficiency
- 【EXCELLENT PERFORMANCE】Our worm gear reducer motors are made of excellent materials, fall resistant, wear-resistant, durable, long service life, we guarantee the product quality and everyone's experience in the process of use
- 【LONG SERVICE LIFE】Our 3D printers are all made of excellent materials. They are strictly controlled in the manufacturing process and guaranteed in quality. Therefore, they have a long working life and can save more time and money
- 【HIGH COST PERFORMANCE】The price of our printer is more affordable. Compared with other printers, our quality is better and the price is more favorable. We strictly control all aspects, so we have high cost performance
- 【SPECIFICATION】Voltage: AC115v-240v, Printing Range: 300 x 300 x 400mm, Printing Thick Bottom: 0.1-0.4mm, Printing Accuracy: ±0.1mm, Nozzle Diameter: 0.2-0.8mm, Power: 350w, Hot Bed Temperature: ≤110℃, Nozzle Temperature: ≤260℃, Printing Speed: ≤180mm/s, Normal Printing Speed: 30-60mm/s
- 【LOW NOISE】With high-quality design, the nozzle can slide smoothly when working, with low noise, high efficiency, good use experience, and simple structure, good operation, not difficult, suitable for most scenes
- Strong Compatibility Auto & Manual Leveling:BL touch (Auto Leveling Device) can be added by yourself,enjoying more fun of DIY your own 3d printer.
- Dual Port Fan Cooling Plenum:Dual-port cooling fan extruder, Evenly heat- dissipated and coaling dawn immediately. reducing plugging and poor- spillage ensures models with high quality.
- A New Tough All Metal Frame: High quality V Profile selected, more stable without any vibration,smoothly printed-out with high accuracy.
- Upgraded Ultra Silent Mother Board: Self-developed Industrial-grade Motherboard and TMC2208 Utra Silent Drive are adopted /Cost-effective /Running more stable/ Noise reduction /Compression resistance.
Where to buy?
If you are asking yourself where to buy Zombidle 3d printer? Buy online or directly in a shop?
- Online The advantages of online stores are the immediate availability of Zombidle 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
- Physical Store In a physical store instead you can try the product with your own hands, you can directly see Zombidle 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.
Zombidle 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Zombidle 3d printer used.
Discounts and Coupons in the United Kingdom (UK)
If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Zombidle 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.
- This nozzle is made of high quality Ti alloy material, come with high temperature flexibility
- Inner surface is very glossy(not cheap nozzles on the market), so you can print without worrying about jams
- The product is very suitable for high temperature 3D printing that other nozzles cannot handle
- This Ti nozzle can be used for CR‑10 all metal thermal kit and other MK8 MK9 extruder and 3D printer
- For MK8 nozzle is durable, non‑stick, have strong corrosion‑resistant and wear‑resistant
- 【EXCELLENT PERFORMANCE】Our worm gear reducer motors are made of excellent materials, fall resistant, wear-resistant, durable, long service life, we guarantee the product quality and everyone's experience in the process of use
- 【LONG SERVICE LIFE】Our 3D printers are all made of excellent materials. They are strictly controlled in the manufacturing process and guaranteed in quality. Therefore, they have a long working life and can save more time and money
- 【HIGH COST PERFORMANCE】The price of our printer is more affordable. Compared with other printers, our quality is better and the price is more favorable. We strictly control all aspects, so we have high cost performance
- 【SPECIFICATION】Voltage: AC115v-240v, Printing Range: 300 x 300 x 400mm, Printing Thick Bottom: 0.1-0.4mm, Printing Accuracy: ±0.1mm, Nozzle Diameter: 0.2-0.8mm, Power: 350w, Hot Bed Temperature: ≤110℃, Nozzle Temperature: ≤260℃, Printing Speed: ≤180mm/s, Normal Printing Speed: 30-60mm/s
- 【LOW NOISE】With high-quality design, the nozzle can slide smoothly when working, with low noise, high efficiency, good use experience, and simple structure, good operation, not difficult, suitable for most scenes
- Like silk, it retains the shiny silky smooth appearance of the foundation and adds an extra metallic luster to it
- PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
- 1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
- 1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
- The fixed color scheme makes it clearer when thinking about color of the prints. Purple--red copper--green--sand yellow--purple blue--ice blue--bronze--orange--rose red--light purple
- Strong Compatibility Auto & Manual Leveling:BL touch (Auto Leveling Device) can be added by yourself,enjoying more fun of DIY your own 3d printer.
- Dual Port Fan Cooling Plenum:Dual-port cooling fan extruder, Evenly heat- dissipated and coaling dawn immediately. reducing plugging and poor- spillage ensures models with high quality.
- A New Tough All Metal Frame: High quality V Profile selected, more stable without any vibration,smoothly printed-out with high accuracy.
- Upgraded Ultra Silent Mother Board: Self-developed Industrial-grade Motherboard and TMC2208 Utra Silent Drive are adopted /Cost-effective /Running more stable/ Noise reduction /Compression resistance.
- This is a hot‑end component for Creality 3D Ender/CR series, a good replacement and repair part.
- Made of all metal, reliable and durable, using full straight throat, not easy to block, and easy to clean.
- The nozzle uses 0.4mm aperture, and can also be adapted for MK8 nozzles with apertures of 0.2/0.3/0.5/0.6/0.8/1.0.
- Exquisite appearance, fine oxidation, heating rod and thermistor mounting holes are aligned, easy to install and use.
- The heating block and the heat sink are fixed by two stainless steel screws, which are stable and not loose, and the heating block will not be reversed when the nozzle is removed.
Similar Products
Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Zombidle 3d printer.