X1 3d printer Reviews and Best Deals

Online product reviews and comparisons for X1 3d printer.

Latest X1 3d printer
Latest X1 3d printer
Artillery Sidewinder X1 SW-X1 3D Printer the latest 4th version
  • Expandable filament holder, support 0.5-3 kg filament roll.Easy assembly, come 95% pre-assembled.
  • FFC cabling system, tidy, good looking.Synchronized Dual Z System, stabler X axis, always level on both ends
  • Direct Drive Extruder with Volcano nozzle, better control over fast extrusion.
  • AC heated glass build platform, faster heating, 80C in 80 seconds, 110 C in 130 seconds.
  • Exclusive ultra-quiet stepper drivers.Patent pending Z nut coupler, smoother Z movements.
Latest X1 3d printer
Artillery Sidewinder X1 3D Printer, 2020 Newest V4 Version Lattice Glass Heat Bed Aluminum Extrusion Frame & Filament Runout Sensor & Power Failure Recovery 3D Printering, 300x300x400cm
  • Exclusive Ultra-Quiet Stepper Driver - Dissipated much less heat and maintaining a higher torque comparing to other quiet stepper drivers available.
  • Synchronized Dual Z System - Make sure both side of the gantry move ups and downs the same height and at the same speed, ensure the X carriage always move parallel to the build plate, even when one of the Z-stepper breaks down.
  • Direct Drive Extruder - With Extruder, it makes your printer more reliable, especially for flexible filaments.
  • AC Heating Platform - For quick heating. A new Lattice glass as 3d printer platform, extremely flat surface, superb adhesion, a breeze to release the printed objects, fast and steady heated curve, tested and durable.
  • Power Failure Protection - Continue printing from the position where the last print was stopped during the power failure, and you can stop the continuous operation or power off.
Latest X1 3d printer
Artillery Sidewinder-X1 Multi-function 3D Printer with Aluminum Extrusion Frame Filament Runout Sensor
  • Easy to Use - The 3D printer is easy to install and remove, touch screen control makes it easy to use.
  • AC Heating Platform - For quick heating, easy to remove print models and save on masking tape.
  • Power Failure Protection - Continue printing from the position where the last print was stopped during the power failure, and you can stop the continuous operation or power off.
  • Direct Drive Extruder - With Titan Extruder, it makes your printer more reliable, especially for flexible filaments.
  • Synchronized Dual Z System - Make sure both side of the gantry move ups and downs the same height and at the same speed, ensure the X carriage always move parallel to the build plate, even when one of the Z-stepper breaks down.
Latest X1 3d printer
Artillery Sidewinder-X1 Multi-function 3D Printer with Aluminum Extrusion Frame Filament Runout Sensor
  • Easy to Use - The 3D printer is easy to install and remove, touch screen control makes it easy to use.
  • AC Heating Platform - For quick heating, easy to remove print models and save on masking tape.
  • Power Failure Protection - Continue printing from the position where the last print was stopped during the power failure, and you can stop the continuous operation or power off.
  • Direct Drive Extruder - With Titan Extruder, it makes your printer more reliable, especially for flexible filaments.
  • Synchronized Dual Z System - Make sure both side of the gantry move ups and downs the same height and at the same speed, ensure the X carriage always move parallel to the build plate, even when one of the Z-stepper breaks down.
Latest X1 3d printer
Latest X1 3d printer
Artillery Sidewinder-X1 Multifunction 3D Printer with Aluminum Extrusion Frame and Filament Output Sensor
  • Exclusive Ultra Silent Step-by-Step Controller: dissipates much less heat and maintains a higher pair compared to other silent step-by-step controllers available.
  • Dual Z Synchronized System: Make sure both sides of the porch move up and down at the same height and at the same speed, make sure that the X trolley always moves parallel to the construction plate, even when one of the Z-stepper is decomposed.
  • Direct Drive Extruder: With the Titan Extruder, it makes your printer more reliable, especially for flexible filaments.
  • AC Heating Platform: For fast warming, easy to remove and save printing models on adhesive tape. Power failure protection: Continue printing from the position where the last print was stopped during the power failure, and can stop continuous operation or turn off.
  • EASY TO USE: The 3D printer is easy to install and remove, the touch screen control makes it easy to use.
Latest X1 3d printer
Aibecy-3 Piece 3D Printer Volcano Brass Extruder Nozzle M6 Thread Printer Head 1.2 mm Output for Sidewinder X1 TEVO Little Monster Filament 1.75 mm 0.6 mm
  • Volcanic 3-piece 3D printer nozzles with M6 thread, easy to use.
  • Made of high quality brass, durable and high temperature resistant.
  • Eight different sizes of extrusion diameter, you can choose according to your needs.
  • Compatible with Sidewinder X1 3D printers, TEVO Little Monster.
  • Fits all filament with a diameter of 1.75 mm.
Latest X1 3d printer
ELEGOO Mars Pro MSLA 3D Printer UV Photocuring LCD 3D Printer with Matrix UV LED Light Source, Built-In Activated Carbon,Off-Line Print 4.53in(L) x 2.56in(W) x 5.9in(H) Printing Size
  • 【Higher Precision and Excellent Performance】Z axis utilizes linear guideway structure, which achieves steadier motion and greatly enhanced moving accuracy to reduce the layer lines on the 3D printed model and make the surface much smoother. The set screws of the build plate are now upgraded to larger anti-slip hexagon socket screws, which have a more stable leveling result. CNC turning CD pattern on the build plate provides a much stronger adherence, especially when printing large 3D models.
  • 【No Irritative Odor Experience】Mars Pro comes with a silicone rubber seal that can be put on the cover to prevent the resin odor from leaking. Built-in activated carbon can absorb and filter the resin odor before they are ventilated throughout the cooling fan, which gives you a fresh and safe user experience.
  • 【Light and Convenient 】Remodeled resin vat made of aluminum alloy is light yet sturdy. The USB port is relocated to the front for your convenience. Mars Pro uses a new user interface with a dark theme and simple design.
  • 【Qulity Prints and Consistent Success】Matrix light source consists of 28 50Watt UV LED lights that have uniform light emission, ensuring superior printing results, a more accurate printing size, and saves your time by 25% in layer exposure time. Mars Pro is the first resin-based 3D printer to use the sliced file of .ctb format, which reduces the file size by an average of 90% compared to .cbddlp format and significantly increases the printing success rate when printing bigger models.
  • 【Warranty and Privilege 】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded). Parts and replacements will be shipped from the overseas warehouse to offer you quality and fast customer service. Mars Pro also comes with a Myminifactory Membership Card, which gives you a privilege to millions of curated 3D objects to start your first printing on Mars Pro.

Buy X1 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for X1 3d printer, buy X1 3d printer directly online and enjoy big saving on your purchases.

On this page you will find the list of the best X1 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


Best
Artillery Sidewinder x1 3D Printer, Newest V4 Version Sidewinder-X1 Multi-function 3D Printer with Aluminum Extrusion Frame & Filament Runout Sensor
  • Exclusive Ultra-Quiet Stepper Driver - Dissipated much less heat and maintaining a higher torque comparing to other quiet stepper drivers available.
  • Synchronized Dual Z System - Make sure both side of the gantry move ups and downs the same height and at the same speed, ensure the X carriage always move parallel to the build plate, even when one of the Z-stepper breaks down.
  • Direct Drive Extruder - With Titan Extruder, it makes your printer more reliable, especially for flexible filaments.
  • AC Heating Platform - For quick heating, easy to remove print models and save on masking tape.
  • Power Failure Protection - Continue printing from the position where the last print was stopped during the power failure, and you can stop the continuous operation or power off.
Best
3D Printer, LABISTS Mini 3D Printer DIY Kit for Beginners Kids with 10M 1.75mm PLA Filament Magnetic Removable Plate Print Size 100x100x100mm(European power supply)
  • High precision print head: the nozzle of the printer uses a professional all-metal nozzle to ensure the best printing temperature and minimise the risk of blockages and printing errors. In addition, the printer has a layer resolution of up to 0.05 mm, which guarantees the accuracy of the print model. Dual fans provide better heat dissipation for faster and more uniform modelling.
  • Fast heating: X1 printers are much easier to use than their printers. It comes with a unique button system that allows you to easily control the start, stop and printing process. The nozzle is heated evenly, it only takes 5 minutes, and the temperature of the nozzle can reach 180 degrees, which can meet the temperature requirements of PLA material pressure.
  • Quiet printing: the printer moves smoothly during printing process, ensuring stable printing speed and quality as well as minimising noise. The working decibel is less than 60 decibels, which does not affect your work and sleep. It is suitable for libraries, apartments, offices, etc.
  • Quick installation: the printer consists of three main parts and can be assembled in a few simple steps. You can enjoy the fun of assembling parts yourself and beginners or children can easily complete them. And its structure is stable and not easy to shake, which can effectively ensure the smooth pressure of the model. Note: If a printer axis cannot be moved, please check if the connection cable is loose.
  • EASY TO USE & SAFETY: You can control everything via software settings (model size and orientation, print quality, printing time, temperature, filament filling and speed). The simple button function also allows children to quickly capture them, which is very suitable for children and beginners. The motor has a robust plastic housing that protects you from burns.
Best
Artillery Sidewinder X1 SW-X1 3D Printer the latest 4th version
  • Expandable filament holder, support 0.5-3 kg filament roll.Easy assembly, come 95% pre-assembled.
  • FFC cabling system, tidy, good looking.Synchronized Dual Z System, stabler X axis, always level on both ends
  • Direct Drive Extruder with Volcano nozzle, better control over fast extrusion.
  • AC heated glass build platform, faster heating, 80C in 80 seconds, 110 C in 130 seconds.
  • Exclusive ultra-quiet stepper drivers.Patent pending Z nut coupler, smoother Z movements.
Best
Jackallo Printer Kit Parts Accessories Compatible for Artillery 3D Printer Sidewinder X1 Nozzle Silicone Sleeve Throat Handle Thermistor Heating Pipe Heating Block Kit
  • This is printer kit parts.
  • The extruder arm is compatible for the original E3D titanium alloy extruder, compatible for Prusa i3 MK2, Ultimate, Artillery Sidewinder X1 printer extruder, 4max pro.
  • It comes with a sparse set, you need to assemble it yourself, which is easy.
  • All metal, sturdy and durable, far better than plastic arms. Plastic products are selected from high quality, and the use time is longer.
  • Compatible for 3D printer Sidewinder X1.
Best
Artillery Sidewinder X1 3D Printer, 2020 Newest V4 Version Lattice Glass Heat Bed Aluminum Extrusion Frame & Filament Runout Sensor & Power Failure Recovery 3D Printering, 300x300x400cm
  • Exclusive Ultra-Quiet Stepper Driver - Dissipated much less heat and maintaining a higher torque comparing to other quiet stepper drivers available.
  • Synchronized Dual Z System - Make sure both side of the gantry move ups and downs the same height and at the same speed, ensure the X carriage always move parallel to the build plate, even when one of the Z-stepper breaks down.
  • Direct Drive Extruder - With Extruder, it makes your printer more reliable, especially for flexible filaments.
  • AC Heating Platform - For quick heating. A new Lattice glass as 3d printer platform, extremely flat surface, superb adhesion, a breeze to release the printed objects, fast and steady heated curve, tested and durable.
  • Power Failure Protection - Continue printing from the position where the last print was stopped during the power failure, and you can stop the continuous operation or power off.

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

X1 3d printer

Here is the ranking of the best X1 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on X1 3d printer and read the reviews left by real customers, see the X1 3d printer ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

X1 3d printer New
Outland Models Railroad Scenery Entrance Stairs Set 1:160 Gauge N
  • This product is created by a 3D printer, this product is unpainted in its original color as pictured
  • For technical and safe transporting reason, the product may come with a very thin sheet below it or a support structure which connects to it on some points (please check the last picture), You may have to remove the product with a cutter(just like you remove the parts from a sprue in a model kit).
  • This item includes: Short Stairs x2, Long Stairs x2, Wide Stairs x1
  • Material: Resin
  • Gauge: Gauge N / 1:160
DISCOUNTX1 3d printer New
ULTECHNOVO 3pcs NTC 3950 100K Thermistor with 1 Meter Wiring for CR10S Pro Ender 3 Artillery X1 3D Printer Heatbed or Hot End Extruder(White)
  • Thermistor temperature measurement is stable.
  • The temperature measurement can be up to 200 degrees. It helps much to solve the issues of strict requirements of thermocouple wiring, and the line is long which is susceptible to get external interference and result in temperature fluctuation that can affect the printing quality.
  • Product usage: mold heating, hot core box, core shooting machine, and other media equipment heating.
  • Conveniently pre-wired with 1 meter long high temperature insulated wiring, work with heated bed or extruder.
  • Features: High sensitivity, rapid response,easy installation, wide temperature range, good stability, high reliability.
X1 3d printer New
Casinlog 3D Printer Upgrade Unit Tita Aero Metal Extruder Empty Arm for 1.75 mm Prusa I3 MK2 Arllery Sidewinder X1
  • 2.Comes with Scattered set, you need to assemble by yourself, it is easy.
  • 1.Made of Material, durable quality, much better than the stock plastic arm
  • 3.Compatible with Extruder, Prusa i3 MK2, , Artillery Sidewinder X1 printer's extruder,4max pro.
X1 3d printer New
DIY Wood Crafts Science Experiments Bulb Switch Conductive Line Kid School Educational Science Toy DIY Montessori Electric Circuit Kit DIY Kits for Adults Science Kits
  • More than a gift: If you have a special business partner that seems to have everything, or you want to show your dad how much he means to you, this is a wonderful gift
  • Brand New and high quality.
  • Assisting teachers and parents in better physics teaching
  • Enrich children's leisure life, cultivate hands-on ability, and consolidate knowledge
  • Let kindergarten children and elementary school students learn physical knowledge, hands-on to form a simple circuit, series circuit, parallel circuit
X1 3d printer New
DIY Wood Crafts Science Experiments DIY Montessori Electric Circuit Kit Bulb Switch Conductive Line Kid School Educational Science Toy DIY Kits for Adults Science Kits
  • More than a gift: If you have a special business partner that seems to have everything, or you want to show your dad how much he means to you, this is a wonderful gift
  • Assisting teachers and parents in better physics teaching
  • Enrich children's leisure life, cultivate hands-on ability, and consolidate knowledge
  • Let kindergarten children and elementary school students learn physical knowledge, hands-on to form a simple circuit, series circuit, parallel circuit
  • Alone or with the family: Whether you like to build models alone in a peaceful atmosphere, or if you want to share your passion for classic car models with your children and show them how to assemble models, you are guaranteed to enjoy them.
X1 3d printer New
ruthex GT2 Timing Belt (5m x 6mm) | Glass Fibre Pull String | Wear-resistant Red Nylon Tooth Surface | for 3D Printers Prusa i3 Anet A8 A6 Anycubic i3 Mega Creality Ender 3/5
  • 🧵 STABLE & DURABLE: Made of glass fiber reinforced rubber, which makes our ruthex GT2 Timing Belt chemically resistant, durable and NOT stretchable at normal tension!
  • 🧵 WEAR-RESISTANT: The belt is coated with a special red nylon tooth surface. This increases the service life of the toothed belt and provides excellent grip of the GT2 tooth geometry.
  • 🧵 3D PRINTERS: The timing belt is commonly used in the 3D printing area for, for example, the printers Anycubic i3 Mega, Prusa i3 MK2 / 3, Prusa Mini, Anet A8 / A6, Creality Ender 3/5 and many more.
  • 🧵 FIXED STOP: The precise roundness of the tooth shape ensures accurate positioning and ensures very quiet and efficient power transmission
  • 🧵 PROTECTED: The neoprene belt back effectively protects the timing belt from dirt, grease and moisture.
X1 3d printer New
ruthex 3D printer nozzles/Nozzle Volcano Set [12 pieces] | 6x brass nozzles 6x stainless steel nozzles | 1.75 filament | for 3D printers e.g. B. Artillery Genius/Sidewinder X1
  • STABLE AND DURABLE: The Volcano hot-end nozzles are made of high quality brass and stainless steel. As a result, they are designed for high loads and a long service life.
  • BRASS NOZZLE: This material is very heat conductive. Therefore you can print with the standard temperatures. Filaments such as PLA, PETG, TPU and ABS are ideal.
  • STAINLESS STEEL NOZZLE: These nozzles are harder and more wear-resistant, but they are not as thermally conductive as brass. We therefore recommend the hot end temperature by min. 15 ° C to achieve the same flow properties of the filament. Very suitable for carbon fiber filled filaments, WOOD or glow-in-the-dark filaments.
  • 3D PRINTER: The volcano printer nozzles from ruthex are compatible for 3D printers with an M6 thread. The suitable filament diameter is 1.75mm. The Noozles are for many printers such as Artillery Genius / Sidewinder X1.
  • INCLUDES QUANTITY: Printer nozzles come in four different sizes. The nozzles are made of two different materials. BRASS NOZZLE: 1x 0.2 mm, 3x 0.4 mm, 1x 0.6 mm, 1x 0.8 mm. STAINLESS STEEL NOZZLE: 1x 0.2 mm, 3x 0.4 mm, 1x 0.6 mm, 1x 0.8 mm (number x initial diameter) In addition, the nozzles are for storage in a reusable plastic box.
X1 3d printer New
B Blesiya 10 Pieces FEP Release Film For 5.5 Inch UV 3D Printers 140x200mmx0.1mm
  • Fitment: for Wanhao Duplicator 7, for Photon, for Monopric Mini Deluxe SLA, for EZ3DX X-5 X-6, for KLD-LCD1268-A1, for MICROMAKE, for MouldX, for nova3d, for EPAX X1
  • Comes with an easy-to-follow tutorial on the package guiding you to replace the FEP film.
  • resistant and durable quality for long term usage.
  • 95% light transmittance which ensures high stability of UV .
  • 200×140 mm and with the thickness of 0.15 mm.
X1 3d printer New
3D Printer PLA Filament 1.75mm, LABISTS Plastic 3D Printing PLA Filament Bundle Flexible Materials 1kg/2.2lb, 0.25KG/Spool 4 Colors (White, Red, Black, Blue)
  • 【Premium 3D Printer PLA Filament】Clog-Free, Bubble-Free, Tangle-Free, Low warping, perfect 3D Printer PLA Filament 1.75mm for smooth and stable 3D printing experience, making printed parts an outstanding surface finish.
  • 【4 Colors & Wide Compatibility】Comes with 4 packs 1KG/2.2 lb Spool 1.75mm 3D Printer red, white, blue and black PLA filament bundle. Compatible with most common FDM 3D printers, such as MK3, Ender 3, Monoprice FlashForge, etc.
  • 【Dimensional Accuracy & Consistency】LABISTS 3D Printer PLA Filament, 1.75 mm in diameter, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing.
  • 【Safety 3D Printer PLA Filament】PLA is environmental material with low odor and the 3D Printer PLA filament is 100% biodegradable & non-toxic.
  • 【3D Printer PLA Filament Using Tips】Recommend Printing Temperature: 190℃-220℃. Recommended Print Speed: 50-100mm/s.

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased X1 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on X1 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

3D Printer PLA Filament 1.75mm, LABISTS Plastic 3D Printing PLA Filament Bundle Flexible Materials 1kg/2.2lb, 0.25KG/Spool 4 Colors (White, Red, Black, Blue)
  • 【Premium 3D Printer PLA Filament】Clog-Free, Bubble-Free, Tangle-Free, Low warping, perfect 3D Printer PLA Filament 1.75mm for smooth and stable 3D printing experience, making printed parts an outstanding surface finish.
  • 【4 Colors & Wide Compatibility】Comes with 4 packs 1KG/2.2 lb Spool 1.75mm 3D Printer red, white, blue and black PLA filament bundle. Compatible with most common FDM 3D printers, such as MK3, Ender 3, Monoprice FlashForge, etc.
  • 【Dimensional Accuracy & Consistency】LABISTS 3D Printer PLA Filament, 1.75 mm in diameter, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing.
  • 【Safety 3D Printer PLA Filament】PLA is environmental material with low odor and the 3D Printer PLA filament is 100% biodegradable & non-toxic.
  • 【3D Printer PLA Filament Using Tips】Recommend Printing Temperature: 190℃-220℃. Recommended Print Speed: 50-100mm/s.
Casinlog 3D Printer Upgrade Unit Tita Aero Metal Extruder Empty Arm for 1.75 mm Prusa I3 MK2 Arllery Sidewinder X1
  • 2.Comes with Scattered set, you need to assemble by yourself, it is easy.
  • 1.Made of Material, durable quality, much better than the stock plastic arm
  • 3.Compatible with Extruder, Prusa i3 MK2, , Artillery Sidewinder X1 printer's extruder,4max pro.
Outland Models Railroad Scenery Entrance Stairs Set 1:160 Gauge N
  • This product is created by a 3D printer, this product is unpainted in its original color as pictured
  • For technical and safe transporting reason, the product may come with a very thin sheet below it or a support structure which connects to it on some points (please check the last picture), You may have to remove the product with a cutter(just like you remove the parts from a sprue in a model kit).
  • This item includes: Short Stairs x2, Long Stairs x2, Wide Stairs x1
  • Material: Resin
  • Gauge: Gauge N / 1:160
DISCOUNT
ULTECHNOVO 3pcs NTC 3950 100K Thermistor with 1 Meter Wiring for CR10S Pro Ender 3 Artillery X1 3D Printer Heatbed or Hot End Extruder(White)
  • Thermistor temperature measurement is stable.
  • The temperature measurement can be up to 200 degrees. It helps much to solve the issues of strict requirements of thermocouple wiring, and the line is long which is susceptible to get external interference and result in temperature fluctuation that can affect the printing quality.
  • Product usage: mold heating, hot core box, core shooting machine, and other media equipment heating.
  • Conveniently pre-wired with 1 meter long high temperature insulated wiring, work with heated bed or extruder.
  • Features: High sensitivity, rapid response,easy installation, wide temperature range, good stability, high reliability.
ruthex 3D printer nozzles/Nozzle Volcano Set [12 pieces] | 6x brass nozzles 6x stainless steel nozzles | 1.75 filament | for 3D printers e.g. B. Artillery Genius/Sidewinder X1
  • STABLE AND DURABLE: The Volcano hot-end nozzles are made of high quality brass and stainless steel. As a result, they are designed for high loads and a long service life.
  • BRASS NOZZLE: This material is very heat conductive. Therefore you can print with the standard temperatures. Filaments such as PLA, PETG, TPU and ABS are ideal.
  • STAINLESS STEEL NOZZLE: These nozzles are harder and more wear-resistant, but they are not as thermally conductive as brass. We therefore recommend the hot end temperature by min. 15 ° C to achieve the same flow properties of the filament. Very suitable for carbon fiber filled filaments, WOOD or glow-in-the-dark filaments.
  • 3D PRINTER: The volcano printer nozzles from ruthex are compatible for 3D printers with an M6 thread. The suitable filament diameter is 1.75mm. The Noozles are for many printers such as Artillery Genius / Sidewinder X1.
  • INCLUDES QUANTITY: Printer nozzles come in four different sizes. The nozzles are made of two different materials. BRASS NOZZLE: 1x 0.2 mm, 3x 0.4 mm, 1x 0.6 mm, 1x 0.8 mm. STAINLESS STEEL NOZZLE: 1x 0.2 mm, 3x 0.4 mm, 1x 0.6 mm, 1x 0.8 mm (number x initial diameter) In addition, the nozzles are for storage in a reusable plastic box.

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much X1 3d printer actually costs.

Latest X1 3d printer
Latest X1 3d printer
Artillery Sidewinder X1 SW-X1 3D Printer the latest 4th version
  • Expandable filament holder, support 0.5-3 kg filament roll.Easy assembly, come 95% pre-assembled.
  • FFC cabling system, tidy, good looking.Synchronized Dual Z System, stabler X axis, always level on both ends
  • Direct Drive Extruder with Volcano nozzle, better control over fast extrusion.
  • AC heated glass build platform, faster heating, 80C in 80 seconds, 110 C in 130 seconds.
  • Exclusive ultra-quiet stepper drivers.Patent pending Z nut coupler, smoother Z movements.
Latest X1 3d printer
Artillery Sidewinder X1 3D Printer, 2020 Newest V4 Version Lattice Glass Heat Bed Aluminum Extrusion Frame & Filament Runout Sensor & Power Failure Recovery 3D Printering, 300x300x400cm
  • Exclusive Ultra-Quiet Stepper Driver - Dissipated much less heat and maintaining a higher torque comparing to other quiet stepper drivers available.
  • Synchronized Dual Z System - Make sure both side of the gantry move ups and downs the same height and at the same speed, ensure the X carriage always move parallel to the build plate, even when one of the Z-stepper breaks down.
  • Direct Drive Extruder - With Extruder, it makes your printer more reliable, especially for flexible filaments.
  • AC Heating Platform - For quick heating. A new Lattice glass as 3d printer platform, extremely flat surface, superb adhesion, a breeze to release the printed objects, fast and steady heated curve, tested and durable.
  • Power Failure Protection - Continue printing from the position where the last print was stopped during the power failure, and you can stop the continuous operation or power off.
Latest X1 3d printer
Artillery Sidewinder-X1 Multi-function 3D Printer with Aluminum Extrusion Frame Filament Runout Sensor
  • Easy to Use - The 3D printer is easy to install and remove, touch screen control makes it easy to use.
  • AC Heating Platform - For quick heating, easy to remove print models and save on masking tape.
  • Power Failure Protection - Continue printing from the position where the last print was stopped during the power failure, and you can stop the continuous operation or power off.
  • Direct Drive Extruder - With Titan Extruder, it makes your printer more reliable, especially for flexible filaments.
  • Synchronized Dual Z System - Make sure both side of the gantry move ups and downs the same height and at the same speed, ensure the X carriage always move parallel to the build plate, even when one of the Z-stepper breaks down.
Latest X1 3d printer
Artillery Sidewinder-X1 Multi-function 3D Printer with Aluminum Extrusion Frame Filament Runout Sensor
  • Easy to Use - The 3D printer is easy to install and remove, touch screen control makes it easy to use.
  • AC Heating Platform - For quick heating, easy to remove print models and save on masking tape.
  • Power Failure Protection - Continue printing from the position where the last print was stopped during the power failure, and you can stop the continuous operation or power off.
  • Direct Drive Extruder - With Titan Extruder, it makes your printer more reliable, especially for flexible filaments.
  • Synchronized Dual Z System - Make sure both side of the gantry move ups and downs the same height and at the same speed, ensure the X carriage always move parallel to the build plate, even when one of the Z-stepper breaks down.
Latest X1 3d printer
Latest X1 3d printer
Artillery Sidewinder-X1 Multifunction 3D Printer with Aluminum Extrusion Frame and Filament Output Sensor
  • Exclusive Ultra Silent Step-by-Step Controller: dissipates much less heat and maintains a higher pair compared to other silent step-by-step controllers available.
  • Dual Z Synchronized System: Make sure both sides of the porch move up and down at the same height and at the same speed, make sure that the X trolley always moves parallel to the construction plate, even when one of the Z-stepper is decomposed.
  • Direct Drive Extruder: With the Titan Extruder, it makes your printer more reliable, especially for flexible filaments.
  • AC Heating Platform: For fast warming, easy to remove and save printing models on adhesive tape. Power failure protection: Continue printing from the position where the last print was stopped during the power failure, and can stop continuous operation or turn off.
  • EASY TO USE: The 3D printer is easy to install and remove, the touch screen control makes it easy to use.
Latest X1 3d printer
Aibecy-3 Piece 3D Printer Volcano Brass Extruder Nozzle M6 Thread Printer Head 1.2 mm Output for Sidewinder X1 TEVO Little Monster Filament 1.75 mm 0.6 mm
  • Volcanic 3-piece 3D printer nozzles with M6 thread, easy to use.
  • Made of high quality brass, durable and high temperature resistant.
  • Eight different sizes of extrusion diameter, you can choose according to your needs.
  • Compatible with Sidewinder X1 3D printers, TEVO Little Monster.
  • Fits all filament with a diameter of 1.75 mm.
Latest X1 3d printer
ELEGOO Mars Pro MSLA 3D Printer UV Photocuring LCD 3D Printer with Matrix UV LED Light Source, Built-In Activated Carbon,Off-Line Print 4.53in(L) x 2.56in(W) x 5.9in(H) Printing Size
  • 【Higher Precision and Excellent Performance】Z axis utilizes linear guideway structure, which achieves steadier motion and greatly enhanced moving accuracy to reduce the layer lines on the 3D printed model and make the surface much smoother. The set screws of the build plate are now upgraded to larger anti-slip hexagon socket screws, which have a more stable leveling result. CNC turning CD pattern on the build plate provides a much stronger adherence, especially when printing large 3D models.
  • 【No Irritative Odor Experience】Mars Pro comes with a silicone rubber seal that can be put on the cover to prevent the resin odor from leaking. Built-in activated carbon can absorb and filter the resin odor before they are ventilated throughout the cooling fan, which gives you a fresh and safe user experience.
  • 【Light and Convenient 】Remodeled resin vat made of aluminum alloy is light yet sturdy. The USB port is relocated to the front for your convenience. Mars Pro uses a new user interface with a dark theme and simple design.
  • 【Qulity Prints and Consistent Success】Matrix light source consists of 28 50Watt UV LED lights that have uniform light emission, ensuring superior printing results, a more accurate printing size, and saves your time by 25% in layer exposure time. Mars Pro is the first resin-based 3D printer to use the sliced file of .ctb format, which reduces the file size by an average of 90% compared to .cbddlp format and significantly increases the printing success rate when printing bigger models.
  • 【Warranty and Privilege 】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded). Parts and replacements will be shipped from the overseas warehouse to offer you quality and fast customer service. Mars Pro also comes with a Myminifactory Membership Card, which gives you a privilege to millions of curated 3D objects to start your first printing on Mars Pro.

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and X1 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of X1 3d printer which are among the cheapest on the market. Just scroll through the list to find X1 3d printer the cheapest products.

Catalog

The product X1 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.

X1 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

X1 3d printer New
Outland Models Railroad Scenery Entrance Stairs Set 1:160 Gauge N
  • This product is created by a 3D printer, this product is unpainted in its original color as pictured
  • For technical and safe transporting reason, the product may come with a very thin sheet below it or a support structure which connects to it on some points (please check the last picture), You may have to remove the product with a cutter(just like you remove the parts from a sprue in a model kit).
  • This item includes: Short Stairs x2, Long Stairs x2, Wide Stairs x1
  • Material: Resin
  • Gauge: Gauge N / 1:160
DISCOUNTX1 3d printer New
ULTECHNOVO 3pcs NTC 3950 100K Thermistor with 1 Meter Wiring for CR10S Pro Ender 3 Artillery X1 3D Printer Heatbed or Hot End Extruder(White)
  • Thermistor temperature measurement is stable.
  • The temperature measurement can be up to 200 degrees. It helps much to solve the issues of strict requirements of thermocouple wiring, and the line is long which is susceptible to get external interference and result in temperature fluctuation that can affect the printing quality.
  • Product usage: mold heating, hot core box, core shooting machine, and other media equipment heating.
  • Conveniently pre-wired with 1 meter long high temperature insulated wiring, work with heated bed or extruder.
  • Features: High sensitivity, rapid response,easy installation, wide temperature range, good stability, high reliability.
X1 3d printer New
Casinlog 3D Printer Upgrade Unit Tita Aero Metal Extruder Empty Arm for 1.75 mm Prusa I3 MK2 Arllery Sidewinder X1
  • 2.Comes with Scattered set, you need to assemble by yourself, it is easy.
  • 1.Made of Material, durable quality, much better than the stock plastic arm
  • 3.Compatible with Extruder, Prusa i3 MK2, , Artillery Sidewinder X1 printer's extruder,4max pro.
X1 3d printer New
DIY Wood Crafts Science Experiments Bulb Switch Conductive Line Kid School Educational Science Toy DIY Montessori Electric Circuit Kit DIY Kits for Adults Science Kits
  • More than a gift: If you have a special business partner that seems to have everything, or you want to show your dad how much he means to you, this is a wonderful gift
  • Brand New and high quality.
  • Assisting teachers and parents in better physics teaching
  • Enrich children's leisure life, cultivate hands-on ability, and consolidate knowledge
  • Let kindergarten children and elementary school students learn physical knowledge, hands-on to form a simple circuit, series circuit, parallel circuit
X1 3d printer New
DIY Wood Crafts Science Experiments DIY Montessori Electric Circuit Kit Bulb Switch Conductive Line Kid School Educational Science Toy DIY Kits for Adults Science Kits
  • More than a gift: If you have a special business partner that seems to have everything, or you want to show your dad how much he means to you, this is a wonderful gift
  • Assisting teachers and parents in better physics teaching
  • Enrich children's leisure life, cultivate hands-on ability, and consolidate knowledge
  • Let kindergarten children and elementary school students learn physical knowledge, hands-on to form a simple circuit, series circuit, parallel circuit
  • Alone or with the family: Whether you like to build models alone in a peaceful atmosphere, or if you want to share your passion for classic car models with your children and show them how to assemble models, you are guaranteed to enjoy them.
X1 3d printer New
ruthex GT2 Timing Belt (5m x 6mm) | Glass Fibre Pull String | Wear-resistant Red Nylon Tooth Surface | for 3D Printers Prusa i3 Anet A8 A6 Anycubic i3 Mega Creality Ender 3/5
  • 🧵 STABLE & DURABLE: Made of glass fiber reinforced rubber, which makes our ruthex GT2 Timing Belt chemically resistant, durable and NOT stretchable at normal tension!
  • 🧵 WEAR-RESISTANT: The belt is coated with a special red nylon tooth surface. This increases the service life of the toothed belt and provides excellent grip of the GT2 tooth geometry.
  • 🧵 3D PRINTERS: The timing belt is commonly used in the 3D printing area for, for example, the printers Anycubic i3 Mega, Prusa i3 MK2 / 3, Prusa Mini, Anet A8 / A6, Creality Ender 3/5 and many more.
  • 🧵 FIXED STOP: The precise roundness of the tooth shape ensures accurate positioning and ensures very quiet and efficient power transmission
  • 🧵 PROTECTED: The neoprene belt back effectively protects the timing belt from dirt, grease and moisture.
X1 3d printer New
ruthex 3D printer nozzles/Nozzle Volcano Set [12 pieces] | 6x brass nozzles 6x stainless steel nozzles | 1.75 filament | for 3D printers e.g. B. Artillery Genius/Sidewinder X1
  • STABLE AND DURABLE: The Volcano hot-end nozzles are made of high quality brass and stainless steel. As a result, they are designed for high loads and a long service life.
  • BRASS NOZZLE: This material is very heat conductive. Therefore you can print with the standard temperatures. Filaments such as PLA, PETG, TPU and ABS are ideal.
  • STAINLESS STEEL NOZZLE: These nozzles are harder and more wear-resistant, but they are not as thermally conductive as brass. We therefore recommend the hot end temperature by min. 15 ° C to achieve the same flow properties of the filament. Very suitable for carbon fiber filled filaments, WOOD or glow-in-the-dark filaments.
  • 3D PRINTER: The volcano printer nozzles from ruthex are compatible for 3D printers with an M6 thread. The suitable filament diameter is 1.75mm. The Noozles are for many printers such as Artillery Genius / Sidewinder X1.
  • INCLUDES QUANTITY: Printer nozzles come in four different sizes. The nozzles are made of two different materials. BRASS NOZZLE: 1x 0.2 mm, 3x 0.4 mm, 1x 0.6 mm, 1x 0.8 mm. STAINLESS STEEL NOZZLE: 1x 0.2 mm, 3x 0.4 mm, 1x 0.6 mm, 1x 0.8 mm (number x initial diameter) In addition, the nozzles are for storage in a reusable plastic box.
X1 3d printer New
B Blesiya 10 Pieces FEP Release Film For 5.5 Inch UV 3D Printers 140x200mmx0.1mm
  • Fitment: for Wanhao Duplicator 7, for Photon, for Monopric Mini Deluxe SLA, for EZ3DX X-5 X-6, for KLD-LCD1268-A1, for MICROMAKE, for MouldX, for nova3d, for EPAX X1
  • Comes with an easy-to-follow tutorial on the package guiding you to replace the FEP film.
  • resistant and durable quality for long term usage.
  • 95% light transmittance which ensures high stability of UV .
  • 200×140 mm and with the thickness of 0.15 mm.
X1 3d printer New
3D Printer PLA Filament 1.75mm, LABISTS Plastic 3D Printing PLA Filament Bundle Flexible Materials 1kg/2.2lb, 0.25KG/Spool 4 Colors (White, Red, Black, Blue)
  • 【Premium 3D Printer PLA Filament】Clog-Free, Bubble-Free, Tangle-Free, Low warping, perfect 3D Printer PLA Filament 1.75mm for smooth and stable 3D printing experience, making printed parts an outstanding surface finish.
  • 【4 Colors & Wide Compatibility】Comes with 4 packs 1KG/2.2 lb Spool 1.75mm 3D Printer red, white, blue and black PLA filament bundle. Compatible with most common FDM 3D printers, such as MK3, Ender 3, Monoprice FlashForge, etc.
  • 【Dimensional Accuracy & Consistency】LABISTS 3D Printer PLA Filament, 1.75 mm in diameter, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing.
  • 【Safety 3D Printer PLA Filament】PLA is environmental material with low odor and the 3D Printer PLA filament is 100% biodegradable & non-toxic.
  • 【3D Printer PLA Filament Using Tips】Recommend Printing Temperature: 190℃-220℃. Recommended Print Speed: 50-100mm/s.

Where to buy?

If you are asking yourself where to buy X1 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of X1 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see X1 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

X1 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from X1 3d printer used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get X1 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

3D Printer PLA Filament 1.75mm, LABISTS Plastic 3D Printing PLA Filament Bundle Flexible Materials 1kg/2.2lb, 0.25KG/Spool 4 Colors (White, Red, Black, Blue)
  • 【Premium 3D Printer PLA Filament】Clog-Free, Bubble-Free, Tangle-Free, Low warping, perfect 3D Printer PLA Filament 1.75mm for smooth and stable 3D printing experience, making printed parts an outstanding surface finish.
  • 【4 Colors & Wide Compatibility】Comes with 4 packs 1KG/2.2 lb Spool 1.75mm 3D Printer red, white, blue and black PLA filament bundle. Compatible with most common FDM 3D printers, such as MK3, Ender 3, Monoprice FlashForge, etc.
  • 【Dimensional Accuracy & Consistency】LABISTS 3D Printer PLA Filament, 1.75 mm in diameter, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing.
  • 【Safety 3D Printer PLA Filament】PLA is environmental material with low odor and the 3D Printer PLA filament is 100% biodegradable & non-toxic.
  • 【3D Printer PLA Filament Using Tips】Recommend Printing Temperature: 190℃-220℃. Recommended Print Speed: 50-100mm/s.
Casinlog 3D Printer Upgrade Unit Tita Aero Metal Extruder Empty Arm for 1.75 mm Prusa I3 MK2 Arllery Sidewinder X1
  • 2.Comes with Scattered set, you need to assemble by yourself, it is easy.
  • 1.Made of Material, durable quality, much better than the stock plastic arm
  • 3.Compatible with Extruder, Prusa i3 MK2, , Artillery Sidewinder X1 printer's extruder,4max pro.
Outland Models Railroad Scenery Entrance Stairs Set 1:160 Gauge N
  • This product is created by a 3D printer, this product is unpainted in its original color as pictured
  • For technical and safe transporting reason, the product may come with a very thin sheet below it or a support structure which connects to it on some points (please check the last picture), You may have to remove the product with a cutter(just like you remove the parts from a sprue in a model kit).
  • This item includes: Short Stairs x2, Long Stairs x2, Wide Stairs x1
  • Material: Resin
  • Gauge: Gauge N / 1:160
DISCOUNT
ULTECHNOVO 3pcs NTC 3950 100K Thermistor with 1 Meter Wiring for CR10S Pro Ender 3 Artillery X1 3D Printer Heatbed or Hot End Extruder(White)
  • Thermistor temperature measurement is stable.
  • The temperature measurement can be up to 200 degrees. It helps much to solve the issues of strict requirements of thermocouple wiring, and the line is long which is susceptible to get external interference and result in temperature fluctuation that can affect the printing quality.
  • Product usage: mold heating, hot core box, core shooting machine, and other media equipment heating.
  • Conveniently pre-wired with 1 meter long high temperature insulated wiring, work with heated bed or extruder.
  • Features: High sensitivity, rapid response,easy installation, wide temperature range, good stability, high reliability.
ruthex 3D printer nozzles/Nozzle Volcano Set [12 pieces] | 6x brass nozzles 6x stainless steel nozzles | 1.75 filament | for 3D printers e.g. B. Artillery Genius/Sidewinder X1
  • STABLE AND DURABLE: The Volcano hot-end nozzles are made of high quality brass and stainless steel. As a result, they are designed for high loads and a long service life.
  • BRASS NOZZLE: This material is very heat conductive. Therefore you can print with the standard temperatures. Filaments such as PLA, PETG, TPU and ABS are ideal.
  • STAINLESS STEEL NOZZLE: These nozzles are harder and more wear-resistant, but they are not as thermally conductive as brass. We therefore recommend the hot end temperature by min. 15 ° C to achieve the same flow properties of the filament. Very suitable for carbon fiber filled filaments, WOOD or glow-in-the-dark filaments.
  • 3D PRINTER: The volcano printer nozzles from ruthex are compatible for 3D printers with an M6 thread. The suitable filament diameter is 1.75mm. The Noozles are for many printers such as Artillery Genius / Sidewinder X1.
  • INCLUDES QUANTITY: Printer nozzles come in four different sizes. The nozzles are made of two different materials. BRASS NOZZLE: 1x 0.2 mm, 3x 0.4 mm, 1x 0.6 mm, 1x 0.8 mm. STAINLESS STEEL NOZZLE: 1x 0.2 mm, 3x 0.4 mm, 1x 0.6 mm, 1x 0.8 mm (number x initial diameter) In addition, the nozzles are for storage in a reusable plastic box.

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to X1 3d printer.

Rating: 3.32 of 5 - 34 votes
1 Star2 Stars3 Stars4 Stars5 Stars (34 votes, average: 3.32 out of 5)
Loading...