Weistek 3d printer Reviews and Best Deals

Find online Product Reviews, Ranks and Prices for Weistek 3d printer. Shop Weistek 3d printer directly from the 2021 Top Online Stores like Amazon, eBay and Aliexpress. Don't miss out on the top promotions for Weistek 3d printer, buy Weistek 3d printer directly online and enjoy big saving on your purchases.

Latest Weistek 3d printer
weistek WT200, Compatible 3d Printer PLA Filament 1.75 mm
  • Assembled
  • Its design allows for the realization of complicated work and/or projects but is lightweight and versatile so can be transported without problems
Latest Weistek 3d printer
Weistek IdeaWerk Plus Multifunction 3D Printer - White
  • Printing Technology:
  • Manufacturer's warranty : 2 years
Latest Weistek 3d printer
Weistek PETG 1.75mm Filament for 3D printer, 1KG(2.2lb) PETG 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, 1.75 mm, (Yellow)
  • DIMENSIONAL: 1 KG (approximately 2.20 lbs) Spool, Diameter (Dimensional Accuracy +/- 0.03mm).
  • HIGH QUALITY Good adhesion between layers and with good impact resistance, the prints can be processed by peeling, cutting, drilling, etc.
  • GOOD EFFECT: The Weistek PETG filament with High gloss, good light transmission, strong toughness and high temperature resistance. The finished prints are smooth and delicate, without warpage and odor, no need for heating bed, compatible with most of 3D printers
  • RECOMMENDED: The recommended temperature for small or thin models: 230 ~ 250 ℃; The recommended temperature for big models: 240 ~ 270 ℃; Printing speed: 60 ~ 90mm / s
  • HEALTHY: Non-toxic, harmless to human body, the material has passed FDA certification, and can be in contact with food
Latest Weistek 3d printer
Weistek 1.75mm PLA Filament, 3D Printer Metal Filament, Dimensional Accuracy +/- 0.03 mm, 1.1 LBS(0.5 KG) Spool, Filament for 3D Printers, Copper
  • SUPERIOR MATERIAL: Weistek Copper PLA Filament was made of the 20% Copper flour and PLA raw materials that imported from the United States which is most original and fresh, not the recycled PLA materials used in the market.
  • HIGH QUALITY : Produced with PLA and 30% of copper powder, The printed model has obvious metallic copper texture, and the metal effect is better after sanding with sandpaper.
  • RECOMMENDED: Temperature range at 190~220℃(374℉~446℉) , Print Speed at 60~90mm/s.
  • HIGH COMPATIBILITY: Weistek 3d printing filament compatible with nearly all 3D printers(Such as Creality,XYZprinting,Comgrow,Anycubic, eSun and so on) and 3D Pens.
  • HEALTHY: Food Grade standard and Biodegradable,can print food containers, baby toys, pets' toys and etc.Also there are Mul-ti Color PLA filament for your selection.
Latest Weistek 3d printer
WEISTEK 3D Resin UV 405nm Resin High Precision Rapid Photopolymer Resin with Low Odor for LCD 3D Printer,1000g(Grey)
  • Less Smell, Easy to Dissipate: The odor of WEISTEK resin was reduced infinitely close to 0 through a special production process for optimizes the user's experience during printing.
  • Fast Curing and High Stability: WEISTEK 3D resin has high fluidity and fast curing; Despite its high hardness, it is not brittle and will not cause the main body to break due to dismantling the support.
  • Low Shrinkage and High Precision:The lower than 5% shrinkage of WEISTEK 3D resin insure the high precision and smooth surface of the model, and perfectly restore the 3D printed works.
  • High Viscosity, No Bubbles: Fast to curing the first layer, ensure it stick and firm on print bed,reduce users' print failure rate.
  • Wide Applicability: It`s suitable for Anycubic Photon Printer, ELEGOO MARS, Nova3D, Sparkmaker, Longer and most of LCD/DLP 3D printer in the market.
Latest Weistek 3d printer
WEISTEK 3D Resin UV 405nm Resin ABS-Like Photopolymer Resin for LCD 3D Printer,1000g(Grey)
  • 【Less smell, Easy to Dissipate】 The odor of WEISTEK resin was reduced infinitely close to 0 through a special production process for optimizes the user's experience during printing.
  • 【Fast Curing and Good Elasticity】WEISTEK 3D resin has high fluidity and fast curing;printed works delicately with excellent resilience and scan be drilled and tapped.
  • 【Low Shrinkage and High Precision】3.72-4.24% shrinkage of WEISTEK 3D UV resin insure the high precision and smooth surface of the model, and perfectly restore the 3D printed works.
  • 【High Viscosity, No Bubbles】 fast to curing the first layer, ensure it stick and firm on print bed,reduce users' print failure rate.
  • 【Wide Applicability】 It`s suitable for Anycubic Photon Printer,ELEGOO MARS,Nova and most of LCD/DLP 3D printer in the market.
Latest Weistek 3d printer
ACCCREATE 1.75mm PLA Filament, 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS(1 KG) Spool, Filament for 3D Printers(White)
  • SUPERIOR MATERIAL: Weistek PLA Filament was made of the raw materials that imported from the United States which is most original and fresh, not the recycled PLA materials used in the market.
  • HIGH QUALITY : Weistek own a professional quality inspection team, we will do the second quality inspection before packing, strictly guaranteeing the deviation of wire diameter ± 0.03mm
  • RECOMMENDED: Temperature range at 190~230℃(374℉~446℉) , Print Speed at 60~90mm/s.
  • HIGH COMPATIBILITY: Weistek 3d printing filament compatible with nearly all 3D printers(Such as Creality,XYZprinting,Comgrow,Anycubic, eSun and so on) and 3D Pens.
  • HEALTHY: Food Grade standard and Biodegradable,can print food containers, baby toys, pets' toys and etc.Also there are Mul-ti Color PLA filament for your selection.
Latest Weistek 3d printer
ACCCREATE 3D Filament, PLA 1.75mm 50g Sample Pack,3D Pen Filament Refill,Filament for 3D Printers and 3D Pen(Orange)
  • SUPERIOR MATERIAL: Weistek PLA Filament was made of the raw materials that imported from the United States which is most original and fresh, not the recycled PLA materials used in the market.
  • HIGH QUALITY : Weistek own a professional quality inspection team, we will do the second quality inspection before packing, strictly guaranteeing the deviation of wire diameter ± 0.03mm
  • RECOMMENDED: 50g/ pack, Φ1,75mm (dimension accuracy +/- 0.03mm); Temperature range at 190~230℃(374℉~446℉) , Print Speed at 60~90mm/s.
  • HIGH COMPATIBILITY: Weistek 3d printing filament compatible with nearly all 3D printers(Such as Creality,XYZprinting,Comgrow,Anycubic, eSun and so on) and 3D Pens.
  • HEALTHY: Food Grade standard and Biodegradable,can print food containers, baby toys, pets' toys and etc.Also there are Mul-ti Color PLA filament for your selection.
DISCOUNTLatest Weistek 3d printer
3D Printer Build Surface 220mm for Anet A8 WanHao i3 Build Plate Eewolf (220x220)
  • 3D Printer Build Surface: Please note the auto sensor could not detect the build surface directly.
  • HIGH QUALITY: easy to use and without bumps or bubbles
  • Make it easier to adhere the filament to the heated bed when printing.
  • Compatible with Filament PLA, (not ABS, PETG)
  • Packing: 2* build surface included. 55g/pc
Latest Weistek 3d printer
Goldmine ABS (1.75mm, Gold Color, 1.0kg =2.204 Lbs) Filament on Spool for 3d Printer Reprap, Makerbot, Mendel, Huxley Up, Printer,weistek,thing-o-matic,ult
  • 3 in 1 hybrid design and two-tiered architecture doubles the protection
  • Precise cutouts allow for easy access to buttons and ports with excellent grip feeling for full functionality, elegant appearance
  • Made of durable and high quality materials (TPU+PC), shock absorbent and anti-scratch
  • Specifically designed for iPhone 7 plus(5.5 inch) with its unparalleled mix of slimness and utility
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Overview


Reviews 2021

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Weistek 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Weistek 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

Best
weistek WT200, Compatible 3d Printer PLA Filament 1.75 mm
  • Assembled
  • Its design allows for the realization of complicated work and/or projects but is lightweight and versatile so can be transported without problems
Best
Weistek IdeaWerk Plus Multifunction 3D Printer - White
  • Printing Technology:
  • Manufacturer's warranty : 2 years
Best
Weistek 1.75mm PLA Filament, 3D Printer Metal Filament, Dimensional Accuracy +/- 0.03 mm, 1.1 LBS(0.5 KG) Spool, Filament for 3D Printers, Copper
  • SUPERIOR MATERIAL: Weistek Copper PLA Filament was made of the 20% Copper flour and PLA raw materials that imported from the United States which is most original and fresh, not the recycled PLA materials used in the market.
  • HIGH QUALITY : Produced with PLA and 30% of copper powder, The printed model has obvious metallic copper texture, and the metal effect is better after sanding with sandpaper.
  • RECOMMENDED: Temperature range at 190~220℃(374℉~446℉) , Print Speed at 60~90mm/s.
  • HIGH COMPATIBILITY: Weistek 3d printing filament compatible with nearly all 3D printers(Such as Creality,XYZprinting,Comgrow,Anycubic, eSun and so on) and 3D Pens.
  • HEALTHY: Food Grade standard and Biodegradable,can print food containers, baby toys, pets' toys and etc.Also there are Mul-ti Color PLA filament for your selection.
Best
Weistek PETG 1.75mm Filament for 3D printer, 1KG(2.2lb) PETG 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, 1.75 mm, (Yellow)
  • DIMENSIONAL: 1 KG (approximately 2.20 lbs) Spool, Diameter (Dimensional Accuracy +/- 0.03mm).
  • HIGH QUALITY Good adhesion between layers and with good impact resistance, the prints can be processed by peeling, cutting, drilling, etc.
  • GOOD EFFECT: The Weistek PETG filament with High gloss, good light transmission, strong toughness and high temperature resistance. The finished prints are smooth and delicate, without warpage and odor, no need for heating bed, compatible with most of 3D printers
  • RECOMMENDED: The recommended temperature for small or thin models: 230 ~ 250 ℃; The recommended temperature for big models: 240 ~ 270 ℃; Printing speed: 60 ~ 90mm / s
  • HEALTHY: Non-toxic, harmless to human body, the material has passed FDA certification, and can be in contact with food
Best
WEISTEK 3D Resin UV 405nm Resin High Precision Rapid Photopolymer Resin with Low Odor for LCD 3D Printer,500g(Translucent)
  • 【Less Smell, Easy to Dissipate】The odor of WEISTEK resin was reduced infinitely close to 0 through a special production process for optimizes the user's experience during printing.
  • 【Fast Curing and High Stability】 WEISTEK 3D resin has high fluidity and fast curing; Despite its high hardness, it is not brittle and will not cause the main body to break due to dismantling the support.
  • 【Low Shrinkage and High Precision】The lower than 5% shrinkage of WEISTEK 3D resin insure the high precision and smooth surface of the model, and perfectly restore the 3D printed works.
  • 【High Viscosity, No Bubbles】Fast to curing the first layer, ensure it stick and firm on print bed,reduce users' print failure rate.
  • 【Wide Applicability】 It`s suitable for Anycubic Photon Printer, ELEGOO MARS, Nova3D, Sparkmaker, Longer and most of LCD/DLP 3D printer in the market.

On this product review you can find the list of the best Weistek 3d printer including the technical product sheet, reviews issued by real buyes who have already purchased the products. You can also find info on the prices, active promotions and deals in the United Kingdom (UK).

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Weistek 3d printer

Here is the ranking of the best Weistek 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Weistek 3d printer and read the reviews left by real customers, see the Weistek 3d printer ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Weistek 3d printer New
Mini 3D Printer A9 3D Printer Upgraded Full Metal (160 * 160 * 200 Mm) Build Plate, Fully Assembled PLA Filament SD Card Printable 3D Models
  • Multi Material Compatible:Heated hotbed and nozzle with wide range temperature adjustments allow the printer to compatible with many 3D filament types, such as ABS, PLA, HIP, PP and Nylon etc.
  • Large Print Size:160*160*200mm and LCD panel. Auto change material and intelligent leveling. Cut quickly, high printing precision, good result and easy to load filament,support the complex construction molding.
  • Wide application:The equipment can be diffused in office, education digital institution, Family, hospital etc. You can create character movie, children's toys, quick model design, parts manufacturing, medical model.
  • Easy Installation & Use:Just 10 minutes needed to self-assembly, solve the problem of high freight
  • Service:We also provide more printed materials and equipment.Buy with confidence our professional technical engineer are always at your service, Please contact us in time to obtain.
Weistek 3d printer New
HAWKUNG 3D Printer Silicone Slap Mat, 16x12 inch (410x310mm) Clean Up or Resin Transfer to Protect Work Surface for ELEGOO CREALITY ANYCUBIC Photon Resin UV LCD SLA DLP 3D Printer Accessories, Blue
  • Material: 3D printer slap mat is made of environmentally friendly silicone material, will not be harmed by printer resins, most chemicals, or most glues. The soft silicone pad can be folded, can be rolled up storage.
  • Advantage: This pad is raised around the edge, can be a good collection of liquid resin, stop overflow. Easy to clean and perfect for the transfering prints between containers without worrying about any drips or spills.
  • Easy to Clean: Use to protect your work surface, spill and splash all you like and when you are done, take it outside. When resin become hard, it pops right off to be clean safely and easily with a simple flex. Also it can be clean up with towel and alcohol when resin have not been dry enough.
  • Application: This silicone pad can be used to clean resin prints or replace FEP membranes, without the sticky resin staining your work surface.
  • After-Sale Service: We offer you reliable after-sales service. If you are not satisfied with our products, please contact us, we will give you a refund or free replacement, and we will try our best to solve the problem until you are satisfied.
Weistek 3d printer New
3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board
  • It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing.
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing.
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet.
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard.
  • Used with other motherboards: The material detection module uses the level transition detection method. When with material in, the detection level signal should be high, and when no material, the material port level signal goes low. When the system detects a determined transition from high to low level, it will regard it as the material exhausted, then the board executes the pause command operation, and after the replacement of the material, it will continue to print.
Weistek 3d printer New
Iverntech Upgraded Dual Drive BMG Extruder for CR10,Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer
  • Dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385
  • Adjustable Tension: The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament
  • Suitable for most 3D printers and filaments
  • Warranty: free return/ exchange in 90 days
  • Packing with: 1x Bowden BMG Extruder, 1 x Universal Stepper Motor Bracket
Weistek 3d printer New
Iverntech Upgraded Dual Drive BMG Extruder for CR 10, Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer
  • The BMG Bowden Dual Drive Extruder has an internal gear ratio of 3:1 and high accuracy. We recommend E steps: 385
  • ADJUSTABLE TENSION: With the thumbscrew tensioner, the user can finely adjust the pressure exerted by the drive wheels on the filament
  • Suitable for most 3D printers and filaments
  • Warranty: free return/exchange in 90 days
  • Package with: 1 x Bowden BMG extruder, 1 x Universal stepper motor mount
Weistek 3d printer New
Deruc Geeetech 3D Touch V3.2 accessory automatic levelling sensor for 3D printer
  • 3D Touch V3.2 is the accessory for automatic levelling of the new generation FDM 3D printer. It has been built with the latest technology and can accurately measure the inclination of the incubator.
  • It can be used for incubators made of glass, wood, metal, etc. Users no longer need to manually level the incubator, allowing users to level hot beds more easily and quickly and improving printer success rates and print accuracy.
  • Equipped with a new structural design for higher precision, 3D Touch V3.2 can be widely used in various FDM 3D printers. It is a necessary accessory for 3D printers.
  • The pressure pin is pressed twice to check whether the power supply is switched on. The LED indicator flashes when a problem is determined during a self-test or operation. The standard deviation of the Geeetech 3D Touch repeatability is approximately 0.005 mm.
  • Box contents: 1 x 3D Touch, 4 x M3 screws, 2 x M3 nuts, 1 x metal bracket, 1 x 18 cm cable, 1 x 100 cm cable.
Weistek 3d printer New
ANYCUBIC 3D Printer Single Drive Extruder for Working with Chiron Upgraded Drive Feed, for 3D Printer 1.75 mm PLA/ABS/PETG/TPU
  • High performance upgrade parts for Anycubic Chiron 3D printer.
  • High quality stepper motor with larger torque.
  • Supports PLA / ABS / PETG / TPU, transport the wire smoothly and provide flexible filaments a better experience.
Weistek 3d printer New
QIDI TECH i-Mate 3D Printer,Out of the Box,All Metal Frame, With Upgrade Extruder and Professional Software,Print with PLA,PETG, TPU, Print Size 10.24''(L) X7.87''(W) X7.87'(H), 2021 New Model
  • Excellent industrial structure,i mate adopts the overall gantry frame structure, which is different from other DIY 3d printer’s structures, with higher printing quality and more stability,the printing speed increased by 30%.
  • Unique magnetic printing platform,equipped with 9 special high temperature resistant magnets and a specially made metal panel. Compared with other glass platforms or plastic bending platforms, it is more durable and can be used repeatedly.
  • Please level the build platform after unpacking according to the manual or video instructions, please tighten the nut after leveling. The excellent mechanical structure ensures that the printer does not need to make any adjustments after leveling, please print with confidence. The build platform’s temperature can reach up to 120 degrees. When printing with PLA filament, it only takes 2 minutes for the platform to rise from 0 to 50 degrees.
  • Excellent user experience, friendly UI interface.It’s equipped with self-developed QIDI slicing software, two modes can be selected: normal mode and expert mode. The normal mode is suitable for novices, the parameter system has been intelligently set, no other operations are required, it is very simple. Expert mode is suitable for experienced users, who can deeply participate in modifying parameters and personalized printing models.
  • Qidi Tech’s excellent customer praise comes from the use of high-quality components for QIDI TECH 3d printer, which guarantees the production of high-quality 3d printers. The motors, power supply, touch screen and CNC machining parts are all industrial grade.
Weistek 3d printer New
DBKJ CREALITY CR-6 Max 3D Printer FDM All Metal 3D Printers Kit With Upgraded Silent Motherboard, Carborundum Glass Bed Print Size 400x400x400mm
  • Intelligent automatic leveling: The large-size 3D printer guarantees all-round intelligent automatic leveling of printing accuracy, and the new self-developed automatic leveling technology is accurate, time-saving, labor-saving, efficient and portable.
  • Recovery function: UL certified power supply + stable core structure and new high-quality components intelligently detect material exhaustion or unexpected power failure, which can easily and conveniently resume printing. This can save you valuable materials and time.
  • Creative large size: CR-6Max can achieve 400*400*400 printing size, enjoy unlimited printing fun, the emery glass platform makes the hotbed heat up faster, and the printing insists on excellence. Ultra-smooth, printing without warping, making mold taking easier.
  • High-quality mute motherboard: The mute motherboard driver is upgraded, and the operation is better, effectively reducing the noise in the printing process, without fear of office work being disturbed, and working quietly.
  • Brand-new experience: The dual Y-axis design base is widened, and the dual belt synchronization greatly improves the printing accuracy, and guarantees the printing stability in many aspects. The high-precision nozzle adopts a new technology to upgrade the heat dissipation to be more uniform and the printing is more accurate.

Prices

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Weistek 3d printer actually costs.

Latest Weistek 3d printer
weistek WT200, Compatible 3d Printer PLA Filament 1.75 mm
  • Assembled
  • Its design allows for the realization of complicated work and/or projects but is lightweight and versatile so can be transported without problems
Latest Weistek 3d printer
Weistek IdeaWerk Plus Multifunction 3D Printer - White
  • Printing Technology:
  • Manufacturer's warranty : 2 years
Latest Weistek 3d printer
Weistek PETG 1.75mm Filament for 3D printer, 1KG(2.2lb) PETG 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, 1.75 mm, (Yellow)
  • DIMENSIONAL: 1 KG (approximately 2.20 lbs) Spool, Diameter (Dimensional Accuracy +/- 0.03mm).
  • HIGH QUALITY Good adhesion between layers and with good impact resistance, the prints can be processed by peeling, cutting, drilling, etc.
  • GOOD EFFECT: The Weistek PETG filament with High gloss, good light transmission, strong toughness and high temperature resistance. The finished prints are smooth and delicate, without warpage and odor, no need for heating bed, compatible with most of 3D printers
  • RECOMMENDED: The recommended temperature for small or thin models: 230 ~ 250 ℃; The recommended temperature for big models: 240 ~ 270 ℃; Printing speed: 60 ~ 90mm / s
  • HEALTHY: Non-toxic, harmless to human body, the material has passed FDA certification, and can be in contact with food
Latest Weistek 3d printer
Weistek 1.75mm PLA Filament, 3D Printer Metal Filament, Dimensional Accuracy +/- 0.03 mm, 1.1 LBS(0.5 KG) Spool, Filament for 3D Printers, Copper
  • SUPERIOR MATERIAL: Weistek Copper PLA Filament was made of the 20% Copper flour and PLA raw materials that imported from the United States which is most original and fresh, not the recycled PLA materials used in the market.
  • HIGH QUALITY : Produced with PLA and 30% of copper powder, The printed model has obvious metallic copper texture, and the metal effect is better after sanding with sandpaper.
  • RECOMMENDED: Temperature range at 190~220℃(374℉~446℉) , Print Speed at 60~90mm/s.
  • HIGH COMPATIBILITY: Weistek 3d printing filament compatible with nearly all 3D printers(Such as Creality,XYZprinting,Comgrow,Anycubic, eSun and so on) and 3D Pens.
  • HEALTHY: Food Grade standard and Biodegradable,can print food containers, baby toys, pets' toys and etc.Also there are Mul-ti Color PLA filament for your selection.
Latest Weistek 3d printer
WEISTEK 3D Resin UV 405nm Resin High Precision Rapid Photopolymer Resin with Low Odor for LCD 3D Printer,1000g(Grey)
  • Less Smell, Easy to Dissipate: The odor of WEISTEK resin was reduced infinitely close to 0 through a special production process for optimizes the user's experience during printing.
  • Fast Curing and High Stability: WEISTEK 3D resin has high fluidity and fast curing; Despite its high hardness, it is not brittle and will not cause the main body to break due to dismantling the support.
  • Low Shrinkage and High Precision:The lower than 5% shrinkage of WEISTEK 3D resin insure the high precision and smooth surface of the model, and perfectly restore the 3D printed works.
  • High Viscosity, No Bubbles: Fast to curing the first layer, ensure it stick and firm on print bed,reduce users' print failure rate.
  • Wide Applicability: It`s suitable for Anycubic Photon Printer, ELEGOO MARS, Nova3D, Sparkmaker, Longer and most of LCD/DLP 3D printer in the market.
Latest Weistek 3d printer
WEISTEK 3D Resin UV 405nm Resin ABS-Like Photopolymer Resin for LCD 3D Printer,1000g(Grey)
  • 【Less smell, Easy to Dissipate】 The odor of WEISTEK resin was reduced infinitely close to 0 through a special production process for optimizes the user's experience during printing.
  • 【Fast Curing and Good Elasticity】WEISTEK 3D resin has high fluidity and fast curing;printed works delicately with excellent resilience and scan be drilled and tapped.
  • 【Low Shrinkage and High Precision】3.72-4.24% shrinkage of WEISTEK 3D UV resin insure the high precision and smooth surface of the model, and perfectly restore the 3D printed works.
  • 【High Viscosity, No Bubbles】 fast to curing the first layer, ensure it stick and firm on print bed,reduce users' print failure rate.
  • 【Wide Applicability】 It`s suitable for Anycubic Photon Printer,ELEGOO MARS,Nova and most of LCD/DLP 3D printer in the market.
Latest Weistek 3d printer
ACCCREATE 1.75mm PLA Filament, 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS(1 KG) Spool, Filament for 3D Printers(White)
  • SUPERIOR MATERIAL: Weistek PLA Filament was made of the raw materials that imported from the United States which is most original and fresh, not the recycled PLA materials used in the market.
  • HIGH QUALITY : Weistek own a professional quality inspection team, we will do the second quality inspection before packing, strictly guaranteeing the deviation of wire diameter ± 0.03mm
  • RECOMMENDED: Temperature range at 190~230℃(374℉~446℉) , Print Speed at 60~90mm/s.
  • HIGH COMPATIBILITY: Weistek 3d printing filament compatible with nearly all 3D printers(Such as Creality,XYZprinting,Comgrow,Anycubic, eSun and so on) and 3D Pens.
  • HEALTHY: Food Grade standard and Biodegradable,can print food containers, baby toys, pets' toys and etc.Also there are Mul-ti Color PLA filament for your selection.
Latest Weistek 3d printer
ACCCREATE 3D Filament, PLA 1.75mm 50g Sample Pack,3D Pen Filament Refill,Filament for 3D Printers and 3D Pen(Orange)
  • SUPERIOR MATERIAL: Weistek PLA Filament was made of the raw materials that imported from the United States which is most original and fresh, not the recycled PLA materials used in the market.
  • HIGH QUALITY : Weistek own a professional quality inspection team, we will do the second quality inspection before packing, strictly guaranteeing the deviation of wire diameter ± 0.03mm
  • RECOMMENDED: 50g/ pack, Φ1,75mm (dimension accuracy +/- 0.03mm); Temperature range at 190~230℃(374℉~446℉) , Print Speed at 60~90mm/s.
  • HIGH COMPATIBILITY: Weistek 3d printing filament compatible with nearly all 3D printers(Such as Creality,XYZprinting,Comgrow,Anycubic, eSun and so on) and 3D Pens.
  • HEALTHY: Food Grade standard and Biodegradable,can print food containers, baby toys, pets' toys and etc.Also there are Mul-ti Color PLA filament for your selection.
DISCOUNTLatest Weistek 3d printer
3D Printer Build Surface 220mm for Anet A8 WanHao i3 Build Plate Eewolf (220x220)
  • 3D Printer Build Surface: Please note the auto sensor could not detect the build surface directly.
  • HIGH QUALITY: easy to use and without bumps or bubbles
  • Make it easier to adhere the filament to the heated bed when printing.
  • Compatible with Filament PLA, (not ABS, PETG)
  • Packing: 2* build surface included. 55g/pc
Latest Weistek 3d printer
Goldmine ABS (1.75mm, Gold Color, 1.0kg =2.204 Lbs) Filament on Spool for 3d Printer Reprap, Makerbot, Mendel, Huxley Up, Printer,weistek,thing-o-matic,ult
  • 3 in 1 hybrid design and two-tiered architecture doubles the protection
  • Precise cutouts allow for easy access to buttons and ports with excellent grip feeling for full functionality, elegant appearance
  • Made of durable and high quality materials (TPU+PC), shock absorbent and anti-scratch
  • Specifically designed for iPhone 7 plus(5.5 inch) with its unparalleled mix of slimness and utility
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Promotions and Deals (UK) 2021

During the year there are many promotions on products for sale online and Weistek 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Weistek 3d printer which are among the cheapest on the market. Just scroll through the list to find Weistek 3d printer the cheapest products.

2021 Catalog

The product Weistek 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented. Weistek 3d printer is included in the 2021 catalog presentation along with the family of products belonging to the Brand. The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Weistek 3d printer New
Mini 3D Printer A9 3D Printer Upgraded Full Metal (160 * 160 * 200 Mm) Build Plate, Fully Assembled PLA Filament SD Card Printable 3D Models
  • Multi Material Compatible:Heated hotbed and nozzle with wide range temperature adjustments allow the printer to compatible with many 3D filament types, such as ABS, PLA, HIP, PP and Nylon etc.
  • Large Print Size:160*160*200mm and LCD panel. Auto change material and intelligent leveling. Cut quickly, high printing precision, good result and easy to load filament,support the complex construction molding.
  • Wide application:The equipment can be diffused in office, education digital institution, Family, hospital etc. You can create character movie, children's toys, quick model design, parts manufacturing, medical model.
  • Easy Installation & Use:Just 10 minutes needed to self-assembly, solve the problem of high freight
  • Service:We also provide more printed materials and equipment.Buy with confidence our professional technical engineer are always at your service, Please contact us in time to obtain.
Weistek 3d printer New
HAWKUNG 3D Printer Silicone Slap Mat, 16x12 inch (410x310mm) Clean Up or Resin Transfer to Protect Work Surface for ELEGOO CREALITY ANYCUBIC Photon Resin UV LCD SLA DLP 3D Printer Accessories, Blue
  • Material: 3D printer slap mat is made of environmentally friendly silicone material, will not be harmed by printer resins, most chemicals, or most glues. The soft silicone pad can be folded, can be rolled up storage.
  • Advantage: This pad is raised around the edge, can be a good collection of liquid resin, stop overflow. Easy to clean and perfect for the transfering prints between containers without worrying about any drips or spills.
  • Easy to Clean: Use to protect your work surface, spill and splash all you like and when you are done, take it outside. When resin become hard, it pops right off to be clean safely and easily with a simple flex. Also it can be clean up with towel and alcohol when resin have not been dry enough.
  • Application: This silicone pad can be used to clean resin prints or replace FEP membranes, without the sticky resin staining your work surface.
  • After-Sale Service: We offer you reliable after-sales service. If you are not satisfied with our products, please contact us, we will give you a refund or free replacement, and we will try our best to solve the problem until you are satisfied.
Weistek 3d printer New
3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board
  • It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing.
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing.
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet.
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard.
  • Used with other motherboards: The material detection module uses the level transition detection method. When with material in, the detection level signal should be high, and when no material, the material port level signal goes low. When the system detects a determined transition from high to low level, it will regard it as the material exhausted, then the board executes the pause command operation, and after the replacement of the material, it will continue to print.
Weistek 3d printer New
Iverntech Upgraded Dual Drive BMG Extruder for CR10,Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer
  • Dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385
  • Adjustable Tension: The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament
  • Suitable for most 3D printers and filaments
  • Warranty: free return/ exchange in 90 days
  • Packing with: 1x Bowden BMG Extruder, 1 x Universal Stepper Motor Bracket
Weistek 3d printer New
Iverntech Upgraded Dual Drive BMG Extruder for CR 10, Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer
  • The BMG Bowden Dual Drive Extruder has an internal gear ratio of 3:1 and high accuracy. We recommend E steps: 385
  • ADJUSTABLE TENSION: With the thumbscrew tensioner, the user can finely adjust the pressure exerted by the drive wheels on the filament
  • Suitable for most 3D printers and filaments
  • Warranty: free return/exchange in 90 days
  • Package with: 1 x Bowden BMG extruder, 1 x Universal stepper motor mount
Weistek 3d printer New
Deruc Geeetech 3D Touch V3.2 accessory automatic levelling sensor for 3D printer
  • 3D Touch V3.2 is the accessory for automatic levelling of the new generation FDM 3D printer. It has been built with the latest technology and can accurately measure the inclination of the incubator.
  • It can be used for incubators made of glass, wood, metal, etc. Users no longer need to manually level the incubator, allowing users to level hot beds more easily and quickly and improving printer success rates and print accuracy.
  • Equipped with a new structural design for higher precision, 3D Touch V3.2 can be widely used in various FDM 3D printers. It is a necessary accessory for 3D printers.
  • The pressure pin is pressed twice to check whether the power supply is switched on. The LED indicator flashes when a problem is determined during a self-test or operation. The standard deviation of the Geeetech 3D Touch repeatability is approximately 0.005 mm.
  • Box contents: 1 x 3D Touch, 4 x M3 screws, 2 x M3 nuts, 1 x metal bracket, 1 x 18 cm cable, 1 x 100 cm cable.
Weistek 3d printer New
ANYCUBIC 3D Printer Single Drive Extruder for Working with Chiron Upgraded Drive Feed, for 3D Printer 1.75 mm PLA/ABS/PETG/TPU
  • High performance upgrade parts for Anycubic Chiron 3D printer.
  • High quality stepper motor with larger torque.
  • Supports PLA / ABS / PETG / TPU, transport the wire smoothly and provide flexible filaments a better experience.
Weistek 3d printer New
QIDI TECH i-Mate 3D Printer,Out of the Box,All Metal Frame, With Upgrade Extruder and Professional Software,Print with PLA,PETG, TPU, Print Size 10.24''(L) X7.87''(W) X7.87'(H), 2021 New Model
  • Excellent industrial structure,i mate adopts the overall gantry frame structure, which is different from other DIY 3d printer’s structures, with higher printing quality and more stability,the printing speed increased by 30%.
  • Unique magnetic printing platform,equipped with 9 special high temperature resistant magnets and a specially made metal panel. Compared with other glass platforms or plastic bending platforms, it is more durable and can be used repeatedly.
  • Please level the build platform after unpacking according to the manual or video instructions, please tighten the nut after leveling. The excellent mechanical structure ensures that the printer does not need to make any adjustments after leveling, please print with confidence. The build platform’s temperature can reach up to 120 degrees. When printing with PLA filament, it only takes 2 minutes for the platform to rise from 0 to 50 degrees.
  • Excellent user experience, friendly UI interface.It’s equipped with self-developed QIDI slicing software, two modes can be selected: normal mode and expert mode. The normal mode is suitable for novices, the parameter system has been intelligently set, no other operations are required, it is very simple. Expert mode is suitable for experienced users, who can deeply participate in modifying parameters and personalized printing models.
  • Qidi Tech’s excellent customer praise comes from the use of high-quality components for QIDI TECH 3d printer, which guarantees the production of high-quality 3d printers. The motors, power supply, touch screen and CNC machining parts are all industrial grade.
Weistek 3d printer New
DBKJ CREALITY CR-6 Max 3D Printer FDM All Metal 3D Printers Kit With Upgraded Silent Motherboard, Carborundum Glass Bed Print Size 400x400x400mm
  • Intelligent automatic leveling: The large-size 3D printer guarantees all-round intelligent automatic leveling of printing accuracy, and the new self-developed automatic leveling technology is accurate, time-saving, labor-saving, efficient and portable.
  • Recovery function: UL certified power supply + stable core structure and new high-quality components intelligently detect material exhaustion or unexpected power failure, which can easily and conveniently resume printing. This can save you valuable materials and time.
  • Creative large size: CR-6Max can achieve 400*400*400 printing size, enjoy unlimited printing fun, the emery glass platform makes the hotbed heat up faster, and the printing insists on excellence. Ultra-smooth, printing without warping, making mold taking easier.
  • High-quality mute motherboard: The mute motherboard driver is upgraded, and the operation is better, effectively reducing the noise in the printing process, without fear of office work being disturbed, and working quietly.
  • Brand-new experience: The dual Y-axis design base is widened, and the dual belt synchronization greatly improves the printing accuracy, and guarantees the printing stability in many aspects. The high-precision nozzle adopts a new technology to upgrade the heat dissipation to be more uniform and the printing is more accurate.

Where to buy?

If you are asking yourself where to buy Weistek 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Weistek 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Stores In a physical store instead you can try the product with your own hands, you can directly see Weistek 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Weistek 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Weistek 3d printer used.

Promo Codes 2021

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Weistek 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

ANYCUBIC 3D Printer Single Drive Extruder for Working with Chiron Upgraded Drive Feed, for 3D Printer 1.75 mm PLA/ABS/PETG/TPU
  • High performance upgrade parts for Anycubic Chiron 3D printer.
  • High quality stepper motor with larger torque.
  • Supports PLA / ABS / PETG / TPU, transport the wire smoothly and provide flexible filaments a better experience.
DBKJ CREALITY CR-6 Max 3D Printer FDM All Metal 3D Printers Kit With Upgraded Silent Motherboard, Carborundum Glass Bed Print Size 400x400x400mm
  • Intelligent automatic leveling: The large-size 3D printer guarantees all-round intelligent automatic leveling of printing accuracy, and the new self-developed automatic leveling technology is accurate, time-saving, labor-saving, efficient and portable.
  • Recovery function: UL certified power supply + stable core structure and new high-quality components intelligently detect material exhaustion or unexpected power failure, which can easily and conveniently resume printing. This can save you valuable materials and time.
  • Creative large size: CR-6Max can achieve 400*400*400 printing size, enjoy unlimited printing fun, the emery glass platform makes the hotbed heat up faster, and the printing insists on excellence. Ultra-smooth, printing without warping, making mold taking easier.
  • High-quality mute motherboard: The mute motherboard driver is upgraded, and the operation is better, effectively reducing the noise in the printing process, without fear of office work being disturbed, and working quietly.
  • Brand-new experience: The dual Y-axis design base is widened, and the dual belt synchronization greatly improves the printing accuracy, and guarantees the printing stability in many aspects. The high-precision nozzle adopts a new technology to upgrade the heat dissipation to be more uniform and the printing is more accurate.
Deruc Geeetech 3D Touch V3.2 accessory automatic levelling sensor for 3D printer
  • 3D Touch V3.2 is the accessory for automatic levelling of the new generation FDM 3D printer. It has been built with the latest technology and can accurately measure the inclination of the incubator.
  • It can be used for incubators made of glass, wood, metal, etc. Users no longer need to manually level the incubator, allowing users to level hot beds more easily and quickly and improving printer success rates and print accuracy.
  • Equipped with a new structural design for higher precision, 3D Touch V3.2 can be widely used in various FDM 3D printers. It is a necessary accessory for 3D printers.
  • The pressure pin is pressed twice to check whether the power supply is switched on. The LED indicator flashes when a problem is determined during a self-test or operation. The standard deviation of the Geeetech 3D Touch repeatability is approximately 0.005 mm.
  • Box contents: 1 x 3D Touch, 4 x M3 screws, 2 x M3 nuts, 1 x metal bracket, 1 x 18 cm cable, 1 x 100 cm cable.
QIDI TECH i-Mate 3D Printer,Out of the Box,All Metal Frame, With Upgrade Extruder and Professional Software,Print with PLA,PETG, TPU, Print Size 10.24''(L) X7.87''(W) X7.87'(H), 2021 New Model
  • Excellent industrial structure,i mate adopts the overall gantry frame structure, which is different from other DIY 3d printer’s structures, with higher printing quality and more stability,the printing speed increased by 30%.
  • Unique magnetic printing platform,equipped with 9 special high temperature resistant magnets and a specially made metal panel. Compared with other glass platforms or plastic bending platforms, it is more durable and can be used repeatedly.
  • Please level the build platform after unpacking according to the manual or video instructions, please tighten the nut after leveling. The excellent mechanical structure ensures that the printer does not need to make any adjustments after leveling, please print with confidence. The build platform’s temperature can reach up to 120 degrees. When printing with PLA filament, it only takes 2 minutes for the platform to rise from 0 to 50 degrees.
  • Excellent user experience, friendly UI interface.It’s equipped with self-developed QIDI slicing software, two modes can be selected: normal mode and expert mode. The normal mode is suitable for novices, the parameter system has been intelligently set, no other operations are required, it is very simple. Expert mode is suitable for experienced users, who can deeply participate in modifying parameters and personalized printing models.
  • Qidi Tech’s excellent customer praise comes from the use of high-quality components for QIDI TECH 3d printer, which guarantees the production of high-quality 3d printers. The motors, power supply, touch screen and CNC machining parts are all industrial grade.
HAWKUNG 3D Printer Silicone Slap Mat, 16x12 inch (410x310mm) Clean Up or Resin Transfer to Protect Work Surface for ELEGOO CREALITY ANYCUBIC Photon Resin UV LCD SLA DLP 3D Printer Accessories, Blue
  • Material: 3D printer slap mat is made of environmentally friendly silicone material, will not be harmed by printer resins, most chemicals, or most glues. The soft silicone pad can be folded, can be rolled up storage.
  • Advantage: This pad is raised around the edge, can be a good collection of liquid resin, stop overflow. Easy to clean and perfect for the transfering prints between containers without worrying about any drips or spills.
  • Easy to Clean: Use to protect your work surface, spill and splash all you like and when you are done, take it outside. When resin become hard, it pops right off to be clean safely and easily with a simple flex. Also it can be clean up with towel and alcohol when resin have not been dry enough.
  • Application: This silicone pad can be used to clean resin prints or replace FEP membranes, without the sticky resin staining your work surface.
  • After-Sale Service: We offer you reliable after-sales service. If you are not satisfied with our products, please contact us, we will give you a refund or free replacement, and we will try our best to solve the problem until you are satisfied.
Mini 3D Printer A9 3D Printer Upgraded Full Metal (160 * 160 * 200 Mm) Build Plate, Fully Assembled PLA Filament SD Card Printable 3D Models
  • Multi Material Compatible:Heated hotbed and nozzle with wide range temperature adjustments allow the printer to compatible with many 3D filament types, such as ABS, PLA, HIP, PP and Nylon etc.
  • Large Print Size:160*160*200mm and LCD panel. Auto change material and intelligent leveling. Cut quickly, high printing precision, good result and easy to load filament,support the complex construction molding.
  • Wide application:The equipment can be diffused in office, education digital institution, Family, hospital etc. You can create character movie, children's toys, quick model design, parts manufacturing, medical model.
  • Easy Installation & Use:Just 10 minutes needed to self-assembly, solve the problem of high freight
  • Service:We also provide more printed materials and equipment.Buy with confidence our professional technical engineer are always at your service, Please contact us in time to obtain.
Iverntech Upgraded Dual Drive BMG Extruder for CR 10, Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer
  • The BMG Bowden Dual Drive Extruder has an internal gear ratio of 3:1 and high accuracy. We recommend E steps: 385
  • ADJUSTABLE TENSION: With the thumbscrew tensioner, the user can finely adjust the pressure exerted by the drive wheels on the filament
  • Suitable for most 3D printers and filaments
  • Warranty: free return/exchange in 90 days
  • Package with: 1 x Bowden BMG extruder, 1 x Universal stepper motor mount

Others Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Weistek 3d printer.

Rating: 3.33 of 5 - 33 votes
1 Star2 Stars3 Stars4 Stars5 Stars (33 votes, average: 3.33 out of 5)
Loading...