Ultimaker 3d printer filament Reviews and Best Deals

Don't miss out on the promotions for Ultimaker 3d printer filament, buy Ultimaker 3d printer filament directly online and enjoy big saving on your purchases.

DISCOUNTLatest Ultimaker 3d printer filament
PLA Filament 1.75mm Silk Rainbow Multicolor, SUNLU Multicolor Filament PLA 1.75mm, 3D Printing Filament PLA for FDM 3D Printer, 1KG PLA Rainbow
  • 【Highlight Shiny Silk Color Change Rainbow PLA】Nice shiny special rainbow multi color Gradient. Around Each 13 - 15 Meters to Change Color. No polishing needed, you can print multi beautiful different colors in one spool filament, silk glossy smooth appearance, perfect for arts, crafts, DIY, many different 3D print projects, printing at a high detail results in a beautiful finish
  • 【Popular Silk Shinning Colors】: Smooth& Silk-Like Feel - silky shinny surface with silk luster, giving smooth, pearly and unique touch. The finished 3D printed Items with beautiful silk shiny performance. no polishing needed, printing at a high detail results in a beautiful finish. SUNLU silk PLA filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result!
  • 【1.75mm High Precision +/- 0.02mm Tolerance】: 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged. Recommened nozzle temp print temp.: 200-230℃, platform temp 60-80℃(glue is required if you want better print effect).
  • 【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
DISCOUNTLatest Ultimaker 3d printer filament
ANYCUBIC 3D Printer 1KG 1.75mm Filament PLA, 3D Printing PLA Filament for 3D Printers & 3D Pens (Grey)
  • Dimensional Tolerance ±0.02mm 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.02 mm. Perfect roundness and very tight diameter tolerance, approximately 330 m of filament on each spool ease of use, minimal warping, no odor, no clogging, no bubbles. Give you a wonderful printing experience.
  • 100% Environmental Friendly 100% Biodegradable, ultimately generates carbon dioxide and water without polluting the environment. Comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances.
  • Compatible with Most FDM 3D printers and 3D Pen Such as ANYCUBIC, AirWolf, Aleph Objects, BCN3D, Beeverycreative, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP,BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, etc.
  • Vacuumed Sealed Packaging This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging. Prevent nozzle jams and yield smooth 3D models.
  • Updated Version & Customer Support Package Include: 1*2.2 LBS (1KG) PLA 3d printer updated version filament of you choose. Fast and effective 24 x 7 professional customer support providing technical solutions.
Latest Ultimaker 3d printer filament
Flashforge 10745 3D Printer Creator Pro Dual Extruder Printer with Optimized Build Plate and Upgraded Spool Holder
  • Structural stability guarantees the steady high-speed and high-precision printing
  • Fully-covered body, removable cover to meet the temperature requirements of different filaments
  • Patented extruder structure, optimized for flexible and normal filament, compatible with other filament in the market
  • Open-source software, compatible with different slicing engines, support multiple printing formats
  • Flash print is able to slice complex model, "Cut", "2D-3D sculpture printing" function added...
DISCOUNTLatest Ultimaker 3d printer filament
ANYCUBIC MEGA-S 3D Printer Printing Size 210 x 210 x 205mm With UltraBase Heated Build Plate UK Plug, 3.5" Touch Screen, Works with TPU/PLA/ABS
  • 【Quick Start】 ANYCUBIC MEGA-S Printing Size: 210 x 210 x 205mm; Modular design with quick assembly lets you start printing straight away
  • 【Precision】Double Z-axis screw motors ensure synchronization, which improves printing precision; The rigid metal frame design enhance the stability of the machine, thereby improving the printing precision
  • 【Powerful Extruder】 Strong extruder provides a better printing experience. Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print 1.75mm Materials: TPU, PLA, ABS, HIPS, WOOD etc.
  • 【More Function】 Ultrabase Platform: Strong adhesion, easy removal, repeatedly used without sacrificing performance; TFT Touch Screen: Full color, multi-language, user friendly UI; Filament Detection: Auto pause if filament runs out or break; Power Loss Resume: One click to continue with the last printing from power off
  • 【Warranty and Service】Purchase through Seller Anycubic Store We provide total one-year machine warranty (print head and hotbed follow warranty terms) and if you have any questions regarding product operation or software please feel free to contact us. Visit ANYCUBIC Amazon official store to watch ANYCUBIC MEGA-S unboxing video (https://www.amazon.co.uk/anycubic)
Latest Ultimaker 3d printer filament
AmazonBasics PETG 3D Printer Filament, 2.85mm, Gray, 1 kg Spool
  • 3D printer filament (2.85mm diameter, gray; 1 kg spool); designed to fit most common 3D printers (check spool size for compatibility)
  • Made of PETG plastic, known for its ease of use (like PLA) and durable strength (like ABS); no heating bed needed; offers easy bed adhesion, stiffness, and a glossy-type finish
  • Spool’s built-in gauge shows percentage of material remaining and approximate length remaining
  • Engineered to reduce jamming;keep filament dry and away from UV light
Latest Ultimaker 3d printer filament
AmazonBasics PLA 3D Printer Filament, 2.85mm, Dark Gray, 1 kg Spool
  • 3D printer filament (2.85mm diameter, dark gray; 1 kg spool); designed to fit most common 3D printers (check spool size for compatibility)
  • Made of PLA, a commonly used thermoplastic material known for its lower melting temperature and ease of use (no heated bed required), plus it’s low-warp, odorless, and offers a glossy-type finish
  • Spool’s built-in gauge shows percentage of material remaining and approximate length remaining
  • Engineered to reduce jamming; keep filament dry and away from UV light
Latest Ultimaker 3d printer filament
eSUN PLA+ Filament 1.75mm, PLA Plus 3D Printer Filament, Dimensional Accuracy +/- 0.03mm, 1KG (2.2 LBS) Spool 3D Printing Filament for 3D Printers, Black
  • 【Dimensional Tolerance +/- 0.03mm】Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
  • 【Tangle Free & No Plugging】Total Length: 340-350m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.
  • 【Environmental Friendly Material】PLA+ is improved and upgraded based on PLA, high strength and better toughness. eSUN filaments are made with virgin materials, biodegradable and eco-friendly, non-toxic and low odor, NO harm to user and environment.
  • 【High Compatibility】Compatible with most of FDM 3D Printers that use 1.75MM filament, Such as: Prusa, Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Aleph Objects, Makergear, Up, Lulzbot, Simplify3D, Flashforge, etc.
  • 【Vacuumed Sealed Packaging】Net Weight: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
Latest Ultimaker 3d printer filament
Flashforge Adventurer 3 3D Printer,Disassemble Nozzle & Removable Platform (AD3)
  • Big Build Size/Small Device Size:Small but compact structure,with no angular design,providing a 150*150*150mm build size.
  • Patented Removable Extruder Structure/No leveling Printing:Flashforge patented extruder structure,fully upgraded,steady filament loading,turbofan and air guide improve printing result.Ready-to-use and no leveling printing preventing any printing imprecisions due to imporper leveling
  • Removable &Heatable &Bendable Plate:Shape-memory material plate heats evenly,supports bending without deformation.Supports heating temperatur up to 100°C,supports ABS filament.Under 400-hour bending test,platform remains the same.Much easier to take down models,even big models.
  • Bult-in Filament Cartridge/Auto Filament Loading/Unloading Funcion:Printer will detect filalment and start loading automotically after filament has been inserted into the intake.
  • Built-in camera function/On-line monitor printing process:You can check real-time printing process and result after connect the camera to internet.
DISCOUNTLatest Ultimaker 3d printer filament
Flashforge 3D Printer Finder Single Extruder Printer
  • Fruity modeling industrial design, no edges and corners, no high temperature components and bare wire, guarantee a safer use experience
  • Assisted leveling, filament run-out reminder, slide-in build plate realize easy operation
  • Smart supports, provide treelike and linear supports, can be modified manually.
  • 3.5' touch screen panel, easy operation, instant previews of 3D model files.
  • Ultra-quiet operation design, suitable for quiet working environment

On this page you will find the list of the best Ultimaker 3d printer filament including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Ultimaker 3d printer filament | Overview


Best
Monoprice Select Mini 3D Printer v2 - White With Heated (120 x 120 x 120 mm) Build Plate, Fully Assembled + Free Sample PLA Filament And MicroSD Card Preloaded With Printable 3D Models
  • Support for all 1.75mm Filament types- A heated build plate allow this printer to work with any type of filament, from basic filaments, such as ABS and PLA, to more advanced materials, such as conductive PLA, wood and metal composites, or dissolvable PVA
  • Compact Desktop Design: Featuring a small footprint and basic, open frame design, this 3D printer is compact enough for any desk.
  • Ready to Print: Unlike most other low-cost 3D printers, this printer ships fully assembled and has already been calibrated at the factory. We even include sample PLA filament and a MicroSD card with preinstalled models, so you can start printing right out of the box! Heated aluminum build plate nozzle cooling fan for printing all filament types. Micro USB and MicroSD card connectivity. PC and Mac compatible. Compatible with Cura, Repetier, and other software.
  • Supported Operating Systems: Windows 7 and later, Mac OS X, Linux; All Metal Construction. Designed exclusively with a UK Power Adapter
  • #1 Selling 3D Printer Worldwide *Q1’17 according to CONTEXT
Best
Flashforge 10745 3D Printer Creator Pro Dual Extruder Printer with Optimized Build Plate and Upgraded Spool Holder
  • Structural stability guarantees the steady high-speed and high-precision printing
  • Fully-covered body, removable cover to meet the temperature requirements of different filaments
  • Patented extruder structure, optimized for flexible and normal filament, compatible with other filament in the market
  • Open-source software, compatible with different slicing engines, support multiple printing formats
  • Flash print is able to slice complex model, "Cut", "2D-3D sculpture printing" function added...
Best
ICE Filaments ICEFIL3PLA008 PLA filament, 2.85mm, 0.75 kg, Bold Blue
  • Stronger and less fragile than normal PLA
  • Easy to print at low temperatures
  • Little to no warping
  • Biodegradable
  • Limited smell
Best
PETG 3D Printer Filament, SUNLU PETG Filament 1.75mm Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, PETG White
  • 【Tangle Free& No Plugging】 Better flow of SUNLU no plugging premium 1.75mm PETG filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free.
  • 【High Precision +/- 0.02mm Tolerance】: 1.75mm PETG 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325 m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【Rigid, Tough, High Performance 3D Printing Material】3d filament petg 1.75 is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It's about as stiff as PLA. and is highly resistant to temperatures at above 60°C(140°F).
  • 【Recommended Printing Temp/Nozzle Temperature】: PETG 3d filament suggest printing temperature is 220-250°C - Base Plate Temperature: 70-80°C if no glue applied.
  • 【99% FDM 3D Printer High Compatiblity】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A.
Best
LUTER 20PCS 0.4mm 3D Printer Nozzles MK8 Extruder Nozzles + 5 PCS Stainless Steel Nozzle Cleaning Needles for Makerbot Creality CR-10
  • Prime Quality--The 3D printer nozzles are made of high quality brass, the nozzle cleaning needles are made of premium stainless steel. Heavy duty and provide a long service life.
  • 0.4mm Golden Nozzles--The extruder nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.
  • Excellent Cleaning Needles--The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs.
  • Useful Combination--The needles are designed for 0.4mm 3D printer nozzles including such as Makerbot Creality, CR-10, Ender 2, Ender 3, etc. The needles are also suitable for everything used as a nozzle.
  • Package Include--20 x 0.4mm 3D printer nozzles, 5 x nozzle cleaning needles, 1 x transparent storage box

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Best Ultimaker 3d printer filament

Here is the ranking of the best Ultimaker 3d printer filament, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Ultimaker 3d printer filament and read the reviews left by real customers, see the Ultimaker 3d printer filament ranking and find the store where to buy at the lowest price.

Ultimaker 3d printer filament New
LEE FUNG PLA Plus(PLA+) 3D Printer Filament 1.75mm 2.2lbs with Spool (Silk Green)
  • This filament has strong toughness and not easy to break
  • PLA PLUS is more resilient and smooth than PLA whether you are a novice have a pleasant printing experience.
  • Feed smootyly and constantly without colgging the nozze or extruder.
  • 1.75mm Filament Diameter (Tolerance: ± 0.05mm), recommended print temperature: 392-446℉(200-230℃), Spool Diameter: 7.87inch, Spool Height: 2.83inch
  • High Compatibility - Suitable for FDM 3D printer, like Makerbot, Ultimaker, Mbot Cube, UP plus, Mendel, Prusa, series, etc
Ultimaker 3d printer filament New
LEE FUNG PLA Plus(PLA+) 3D Printer Filament 1.75mm 2.2lbs with Spool(Silk Viiolet Blue)
  • This filament has strong toughness and not easy to break
  • PLA PLUS is more resilient and smooth than PLA whether you are a novice have a pleasant printing experience.
  • Feed smootyly and constantly without colgging the nozze or extruder.
  • 1.75mm Filament Diameter (Tolerance: ± 0.05mm), recommended print temperature: 392-446℉(200-230℃), Spool Diameter: 7.87inch, Spool Height: 2.83inch
  • High Compatibility - Suitable for FDM 3D printer, like Makerbot, Ultimaker, Mbot Cube, UP plus, Mendel, Prusa, series, etc
Ultimaker 3d printer filament New
Blue Flexible 3D Printer Filament 1.75mm 1kg
  • 1.75mm PET 3D Printing Filament. The Consistency and Quality of Each Roll of T-Glase is Very Important. Rolls are made in the United States.
  • Extrusion Temperature: 238C - 245C - Every Roll is Laser Measured to Ensure Quality, Providing You With Dimensionally Accurate 3D Prints.
  • Strong, Good Looking 3D Prints Help Make T-Glase a Well Liked Filament Around the World.
  • There Are Plenty of Standard, Highly Commoditized 3D Printing Materials. T-Glase is Not One of Them. Made from Premium Resins.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Ultimaker 3d printer filament New
CCTREE 1.75mm PETG 3D Printer Filament 1kg Spool (2.2lbs) for Creality CR-10, Ender 3 Pro,Tevo Anet 3D Printer. Transparent
  • Diameter: 1.75mm; Length: 380m; Net weight: 1kg (2.2lbs). Tolerance ± 0.03mm. Spool Size: diameter 195mm + inner hub 55mm height 60mm.
  • 100% virgin material without cheap plastic fillers or regrind. Vacuum sealed with desiccant.
  • Glossy type finish. Long-term keeping the natural color; excellent toughness, More wearable and weathering proof. Advanced spooling technique to avoid filament tangling.
  • Printing Temperature: 220-260°C (428-500°F), depending on printer model. Recommended bed temperature: 50-70°C (122-158°F).
  • CCTREE filament Compatible with Creality, Makerbot, UP, Afinia, Ultimaker,Builder, Felix, FlashForge, Monoprice, XYZprinting, Alunar and other desktop and industrial FDM 3D printers.
Ultimaker 3d printer filament New
TIANSE PETG 3D Printer Filament White, 1.75mm 1KG Spool(2.2lbs) 3D Printer Consumables for Most FDM 3D Printers, Dimensional Accuracy +/- 0.03 mm (White)
  • 【LOW SHRINKAGE & NO WARPING】PETG 3D Filament is extremely durable and tough, all while be odourless. Very low shrinkage and no warping, ideal for large prints. Less brittle than other material types with great chemical resistance.
  • 【NO DRAWING & NO BUBBLES】PETG 3D Filament is a rigid, tough, high performance material offering excellent clarity,adhesion light transmission and high gloss. Excellent fluidity, feeding smoothly, stable output, no jamming.
  • 【HIGH DIMENSIONAL ACCURACY】1KG (approximately 2.20 lbs) spool of PETG (Polyethylene Terephthalate Glycol-Modified) 1.75mm filament diameter (Dimensional Accuracy +/- 0.03mm) comes vacuumed sealed.
  • 【EASY TO PRINTING】PETG is known for its ease of use (like PLA) and durable strength (like ABS), no heating bed needed. Recommended Printing Temperature Range 220°C - 250°C.
  • 【WIDELY APPALICATIONS】Compatible for a variety of FDM 3D printers such as ROBO 3D, Cubify, Leapfrog, MakerBot, Reprap, Afinia, UP, Mendel, flashforge, Solidoodle 2, Printrbot LC, MakerGear M2, Felix, Reprap, Ultimaker and any other 3D printers.
Ultimaker 3d printer filament New
SUNLU Carbon Fiber PLA Filament 1kg 1.75mm 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 1kg Spool, 1.75 mm
  • 【SUNLU Material】 Carbon fiber Polycarbonate - Color: Black - Weight: 1kg (approximately 2.20lbs)/Spool
  • 【SUNLU 3D Filament Size】: 1.75mm (Tolerance Level : ± 0.02mm) - Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.20"
  • 【Recommended Printing Temp/Nozzle Temperature】 190-230°C (374-446°F), Base Plate Temperature: 60-80°C(140-176°F)
  • 【Performance Advantages】 SUNLU Carbon fiber PLA filament has perfect dimensional stability for warp free printing, excellent layer adhesion, and easy support removal
  • 【100% Environmental Friendly】 Carbon Fiber filament 100% Biodegradable, ultimately generates carbon dioxide and water without polluting the environment. Comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances.
Ultimaker 3d printer filament New
PETG Filament 1.75mm,3d Printer Filament,Dimensional Accuracy + - 0.02mm,1kg (2.2 Lbs) Spool 3D Printing Filament Black Petg 1.75mm
  • 【PETG Filament】excellent Clarity,Light Transmission And High Gloss.high Toughness.excellent Impact Strength.chemical Resistance.good Stability.no Cracking.no Warping.environmental Friendly.not-toxic And Low odor.
  • 【Stable Dimensional Tolerance】minimum Tolerance And Low Warping To Ensure Consistent Feeding And Stable Prints,No Clogging,Extremely High Successful Rate,Resulting In Printed Parts That Have An Outstanding Surface Finish And Are Highly precise.
  • 【Stable Dimensional Tolerance】minimum Tolerance And Low Warping To Ensure Consistent Feeding And Stable Prints,No Clogging,Extremely High Successful Rate,Resulting In Printed Parts That Have An Outstanding Surface Finish And Are Highly precise.
  • 【High Compatibility】compatible With ALL FDM 3D Printers (With Heated Beds):Reprap,Afinia,Makerbot,Printrbot,Ultimaker,Airwolf,Makergear,Up!,Lulzbot,Flashforge,Solidoodle,Delta,Mbot,Type A,3d Pen(3doodler Pen)
  • 【Vacuumed Sealed Packaging】 Filament Comes In A Sealed Vacuum Bag With A Desiccant Bag To Keep It Dry And Keep Out Dust And Foreign Particles,Prevent Nozzle Jams And Yield Smooth 3d models.
Ultimaker 3d printer filament New
CARRYKT 3D Printer Parts Heaterblock Ultimaker 2 + UM2 Dual Heads Extruder Block Kit Nozzles 0.4mm Hot End 1.75mm Filament
  • 100% brand new and high quality
  • Made of high-quality metal material, durable, firm and has a long service life.
  • Advanced thick PTFE parts, more stable, durable and reliable to use.
  • Expansion: It can be equipped with dual air duct cooling fan and fan, 2010 cooling fan, etc.
  • Easy and simple to use and operate. Good accessories for 3D printer parts.

Ultimaker 3d printer filament | Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Ultimaker 3d printer filament.

Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know.

Users who release reviews on Ultimaker 3d printer filament give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product.

The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs.

TIANSE PETG 3D Printer Filament White, 1.75mm 1KG Spool(2.2lbs) 3D Printer Consumables for Most FDM 3D Printers, Dimensional Accuracy +/- 0.03 mm (White)
  • 【LOW SHRINKAGE & NO WARPING】PETG 3D Filament is extremely durable and tough, all while be odourless. Very low shrinkage and no warping, ideal for large prints. Less brittle than other material types with great chemical resistance.
  • 【NO DRAWING & NO BUBBLES】PETG 3D Filament is a rigid, tough, high performance material offering excellent clarity,adhesion light transmission and high gloss. Excellent fluidity, feeding smoothly, stable output, no jamming.
  • 【HIGH DIMENSIONAL ACCURACY】1KG (approximately 2.20 lbs) spool of PETG (Polyethylene Terephthalate Glycol-Modified) 1.75mm filament diameter (Dimensional Accuracy +/- 0.03mm) comes vacuumed sealed.
  • 【EASY TO PRINTING】PETG is known for its ease of use (like PLA) and durable strength (like ABS), no heating bed needed. Recommended Printing Temperature Range 220°C - 250°C.
  • 【WIDELY APPALICATIONS】Compatible for a variety of FDM 3D printers such as ROBO 3D, Cubify, Leapfrog, MakerBot, Reprap, Afinia, UP, Mendel, flashforge, Solidoodle 2, Printrbot LC, MakerGear M2, Felix, Reprap, Ultimaker and any other 3D printers.
CCTREE 1.75mm PETG 3D Printer Filament 1kg Spool (2.2lbs) for Creality CR-10, Ender 3 Pro,Tevo Anet 3D Printer. Transparent
  • Diameter: 1.75mm; Length: 380m; Net weight: 1kg (2.2lbs). Tolerance ± 0.03mm. Spool Size: diameter 195mm + inner hub 55mm height 60mm.
  • 100% virgin material without cheap plastic fillers or regrind. Vacuum sealed with desiccant.
  • Glossy type finish. Long-term keeping the natural color; excellent toughness, More wearable and weathering proof. Advanced spooling technique to avoid filament tangling.
  • Printing Temperature: 220-260°C (428-500°F), depending on printer model. Recommended bed temperature: 50-70°C (122-158°F).
  • CCTREE filament Compatible with Creality, Makerbot, UP, Afinia, Ultimaker,Builder, Felix, FlashForge, Monoprice, XYZprinting, Alunar and other desktop and industrial FDM 3D printers.
LEE FUNG PLA Plus(PLA+) 3D Printer Filament 1.75mm 2.2lbs with Spool (Silk Green)
  • This filament has strong toughness and not easy to break
  • PLA PLUS is more resilient and smooth than PLA whether you are a novice have a pleasant printing experience.
  • Feed smootyly and constantly without colgging the nozze or extruder.
  • 1.75mm Filament Diameter (Tolerance: ± 0.05mm), recommended print temperature: 392-446℉(200-230℃), Spool Diameter: 7.87inch, Spool Height: 2.83inch
  • High Compatibility - Suitable for FDM 3D printer, like Makerbot, Ultimaker, Mbot Cube, UP plus, Mendel, Prusa, series, etc
LEE FUNG PLA Plus(PLA+) 3D Printer Filament 1.75mm 2.2lbs with Spool(Silk Viiolet Blue)
  • This filament has strong toughness and not easy to break
  • PLA PLUS is more resilient and smooth than PLA whether you are a novice have a pleasant printing experience.
  • Feed smootyly and constantly without colgging the nozze or extruder.
  • 1.75mm Filament Diameter (Tolerance: ± 0.05mm), recommended print temperature: 392-446℉(200-230℃), Spool Diameter: 7.87inch, Spool Height: 2.83inch
  • High Compatibility - Suitable for FDM 3D printer, like Makerbot, Ultimaker, Mbot Cube, UP plus, Mendel, Prusa, series, etc
Blue Flexible 3D Printer Filament 1.75mm 1kg
  • 1.75mm PET 3D Printing Filament. The Consistency and Quality of Each Roll of T-Glase is Very Important. Rolls are made in the United States.
  • Extrusion Temperature: 238C - 245C - Every Roll is Laser Measured to Ensure Quality, Providing You With Dimensionally Accurate 3D Prints.
  • Strong, Good Looking 3D Prints Help Make T-Glase a Well Liked Filament Around the World.
  • There Are Plenty of Standard, Highly Commoditized 3D Printing Materials. T-Glase is Not One of Them. Made from Premium Resins.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Ultimaker 3d printer filament | Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

DISCOUNTLatest Ultimaker 3d printer filament
PLA Filament 1.75mm Silk Rainbow Multicolor, SUNLU Multicolor Filament PLA 1.75mm, 3D Printing Filament PLA for FDM 3D Printer, 1KG PLA Rainbow
  • 【Highlight Shiny Silk Color Change Rainbow PLA】Nice shiny special rainbow multi color Gradient. Around Each 13 - 15 Meters to Change Color. No polishing needed, you can print multi beautiful different colors in one spool filament, silk glossy smooth appearance, perfect for arts, crafts, DIY, many different 3D print projects, printing at a high detail results in a beautiful finish
  • 【Popular Silk Shinning Colors】: Smooth& Silk-Like Feel - silky shinny surface with silk luster, giving smooth, pearly and unique touch. The finished 3D printed Items with beautiful silk shiny performance. no polishing needed, printing at a high detail results in a beautiful finish. SUNLU silk PLA filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result!
  • 【1.75mm High Precision +/- 0.02mm Tolerance】: 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged. Recommened nozzle temp print temp.: 200-230℃, platform temp 60-80℃(glue is required if you want better print effect).
  • 【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
DISCOUNTLatest Ultimaker 3d printer filament
ANYCUBIC 3D Printer 1KG 1.75mm Filament PLA, 3D Printing PLA Filament for 3D Printers & 3D Pens (Grey)
  • Dimensional Tolerance ±0.02mm 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.02 mm. Perfect roundness and very tight diameter tolerance, approximately 330 m of filament on each spool ease of use, minimal warping, no odor, no clogging, no bubbles. Give you a wonderful printing experience.
  • 100% Environmental Friendly 100% Biodegradable, ultimately generates carbon dioxide and water without polluting the environment. Comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances.
  • Compatible with Most FDM 3D printers and 3D Pen Such as ANYCUBIC, AirWolf, Aleph Objects, BCN3D, Beeverycreative, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP,BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, etc.
  • Vacuumed Sealed Packaging This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging. Prevent nozzle jams and yield smooth 3D models.
  • Updated Version & Customer Support Package Include: 1*2.2 LBS (1KG) PLA 3d printer updated version filament of you choose. Fast and effective 24 x 7 professional customer support providing technical solutions.
Latest Ultimaker 3d printer filament
Flashforge 10745 3D Printer Creator Pro Dual Extruder Printer with Optimized Build Plate and Upgraded Spool Holder
  • Structural stability guarantees the steady high-speed and high-precision printing
  • Fully-covered body, removable cover to meet the temperature requirements of different filaments
  • Patented extruder structure, optimized for flexible and normal filament, compatible with other filament in the market
  • Open-source software, compatible with different slicing engines, support multiple printing formats
  • Flash print is able to slice complex model, "Cut", "2D-3D sculpture printing" function added...
DISCOUNTLatest Ultimaker 3d printer filament
ANYCUBIC MEGA-S 3D Printer Printing Size 210 x 210 x 205mm With UltraBase Heated Build Plate UK Plug, 3.5" Touch Screen, Works with TPU/PLA/ABS
  • 【Quick Start】 ANYCUBIC MEGA-S Printing Size: 210 x 210 x 205mm; Modular design with quick assembly lets you start printing straight away
  • 【Precision】Double Z-axis screw motors ensure synchronization, which improves printing precision; The rigid metal frame design enhance the stability of the machine, thereby improving the printing precision
  • 【Powerful Extruder】 Strong extruder provides a better printing experience. Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print 1.75mm Materials: TPU, PLA, ABS, HIPS, WOOD etc.
  • 【More Function】 Ultrabase Platform: Strong adhesion, easy removal, repeatedly used without sacrificing performance; TFT Touch Screen: Full color, multi-language, user friendly UI; Filament Detection: Auto pause if filament runs out or break; Power Loss Resume: One click to continue with the last printing from power off
  • 【Warranty and Service】Purchase through Seller Anycubic Store We provide total one-year machine warranty (print head and hotbed follow warranty terms) and if you have any questions regarding product operation or software please feel free to contact us. Visit ANYCUBIC Amazon official store to watch ANYCUBIC MEGA-S unboxing video (https://www.amazon.co.uk/anycubic)
Latest Ultimaker 3d printer filament
AmazonBasics PETG 3D Printer Filament, 2.85mm, Gray, 1 kg Spool
  • 3D printer filament (2.85mm diameter, gray; 1 kg spool); designed to fit most common 3D printers (check spool size for compatibility)
  • Made of PETG plastic, known for its ease of use (like PLA) and durable strength (like ABS); no heating bed needed; offers easy bed adhesion, stiffness, and a glossy-type finish
  • Spool’s built-in gauge shows percentage of material remaining and approximate length remaining
  • Engineered to reduce jamming;keep filament dry and away from UV light
Latest Ultimaker 3d printer filament
AmazonBasics PLA 3D Printer Filament, 2.85mm, Dark Gray, 1 kg Spool
  • 3D printer filament (2.85mm diameter, dark gray; 1 kg spool); designed to fit most common 3D printers (check spool size for compatibility)
  • Made of PLA, a commonly used thermoplastic material known for its lower melting temperature and ease of use (no heated bed required), plus it’s low-warp, odorless, and offers a glossy-type finish
  • Spool’s built-in gauge shows percentage of material remaining and approximate length remaining
  • Engineered to reduce jamming; keep filament dry and away from UV light
Latest Ultimaker 3d printer filament
eSUN PLA+ Filament 1.75mm, PLA Plus 3D Printer Filament, Dimensional Accuracy +/- 0.03mm, 1KG (2.2 LBS) Spool 3D Printing Filament for 3D Printers, Black
  • 【Dimensional Tolerance +/- 0.03mm】Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
  • 【Tangle Free & No Plugging】Total Length: 340-350m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.
  • 【Environmental Friendly Material】PLA+ is improved and upgraded based on PLA, high strength and better toughness. eSUN filaments are made with virgin materials, biodegradable and eco-friendly, non-toxic and low odor, NO harm to user and environment.
  • 【High Compatibility】Compatible with most of FDM 3D Printers that use 1.75MM filament, Such as: Prusa, Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Aleph Objects, Makergear, Up, Lulzbot, Simplify3D, Flashforge, etc.
  • 【Vacuumed Sealed Packaging】Net Weight: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
Latest Ultimaker 3d printer filament
Flashforge Adventurer 3 3D Printer,Disassemble Nozzle & Removable Platform (AD3)
  • Big Build Size/Small Device Size:Small but compact structure,with no angular design,providing a 150*150*150mm build size.
  • Patented Removable Extruder Structure/No leveling Printing:Flashforge patented extruder structure,fully upgraded,steady filament loading,turbofan and air guide improve printing result.Ready-to-use and no leveling printing preventing any printing imprecisions due to imporper leveling
  • Removable &Heatable &Bendable Plate:Shape-memory material plate heats evenly,supports bending without deformation.Supports heating temperatur up to 100°C,supports ABS filament.Under 400-hour bending test,platform remains the same.Much easier to take down models,even big models.
  • Bult-in Filament Cartridge/Auto Filament Loading/Unloading Funcion:Printer will detect filalment and start loading automotically after filament has been inserted into the intake.
  • Built-in camera function/On-line monitor printing process:You can check real-time printing process and result after connect the camera to internet.
DISCOUNTLatest Ultimaker 3d printer filament
Flashforge 3D Printer Finder Single Extruder Printer
  • Fruity modeling industrial design, no edges and corners, no high temperature components and bare wire, guarantee a safer use experience
  • Assisted leveling, filament run-out reminder, slide-in build plate realize easy operation
  • Smart supports, provide treelike and linear supports, can be modified manually.
  • 3.5' touch screen panel, easy operation, instant previews of 3D model files.
  • Ultra-quiet operation design, suitable for quiet working environment

Ultimaker 3d printer filament | Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Ultimaker 3d printer filament could be subject to big discounts.

Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Ultimaker 3d printer filament | Cost

Below we have selected a list of Ultimaker 3d printer filament which are among the cheapest on the market. Just scroll through the list to find Ultimaker 3d printer filament the cheapest products.

Ultimaker 3d printer filament | Catalog

The product Ultimaker 3d printer filament can be found in the dedicated catalog where the entire list of products on sale is presented.

Ultimaker 3d printer filament is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

Ultimaker 3d printer filament New
LEE FUNG PLA Plus(PLA+) 3D Printer Filament 1.75mm 2.2lbs with Spool (Silk Green)
  • This filament has strong toughness and not easy to break
  • PLA PLUS is more resilient and smooth than PLA whether you are a novice have a pleasant printing experience.
  • Feed smootyly and constantly without colgging the nozze or extruder.
  • 1.75mm Filament Diameter (Tolerance: ± 0.05mm), recommended print temperature: 392-446℉(200-230℃), Spool Diameter: 7.87inch, Spool Height: 2.83inch
  • High Compatibility - Suitable for FDM 3D printer, like Makerbot, Ultimaker, Mbot Cube, UP plus, Mendel, Prusa, series, etc
Ultimaker 3d printer filament New
LEE FUNG PLA Plus(PLA+) 3D Printer Filament 1.75mm 2.2lbs with Spool(Silk Viiolet Blue)
  • This filament has strong toughness and not easy to break
  • PLA PLUS is more resilient and smooth than PLA whether you are a novice have a pleasant printing experience.
  • Feed smootyly and constantly without colgging the nozze or extruder.
  • 1.75mm Filament Diameter (Tolerance: ± 0.05mm), recommended print temperature: 392-446℉(200-230℃), Spool Diameter: 7.87inch, Spool Height: 2.83inch
  • High Compatibility - Suitable for FDM 3D printer, like Makerbot, Ultimaker, Mbot Cube, UP plus, Mendel, Prusa, series, etc
Ultimaker 3d printer filament New
Blue Flexible 3D Printer Filament 1.75mm 1kg
  • 1.75mm PET 3D Printing Filament. The Consistency and Quality of Each Roll of T-Glase is Very Important. Rolls are made in the United States.
  • Extrusion Temperature: 238C - 245C - Every Roll is Laser Measured to Ensure Quality, Providing You With Dimensionally Accurate 3D Prints.
  • Strong, Good Looking 3D Prints Help Make T-Glase a Well Liked Filament Around the World.
  • There Are Plenty of Standard, Highly Commoditized 3D Printing Materials. T-Glase is Not One of Them. Made from Premium Resins.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Ultimaker 3d printer filament New
CCTREE 1.75mm PETG 3D Printer Filament 1kg Spool (2.2lbs) for Creality CR-10, Ender 3 Pro,Tevo Anet 3D Printer. Transparent
  • Diameter: 1.75mm; Length: 380m; Net weight: 1kg (2.2lbs). Tolerance ± 0.03mm. Spool Size: diameter 195mm + inner hub 55mm height 60mm.
  • 100% virgin material without cheap plastic fillers or regrind. Vacuum sealed with desiccant.
  • Glossy type finish. Long-term keeping the natural color; excellent toughness, More wearable and weathering proof. Advanced spooling technique to avoid filament tangling.
  • Printing Temperature: 220-260°C (428-500°F), depending on printer model. Recommended bed temperature: 50-70°C (122-158°F).
  • CCTREE filament Compatible with Creality, Makerbot, UP, Afinia, Ultimaker,Builder, Felix, FlashForge, Monoprice, XYZprinting, Alunar and other desktop and industrial FDM 3D printers.
Ultimaker 3d printer filament New
TIANSE PETG 3D Printer Filament White, 1.75mm 1KG Spool(2.2lbs) 3D Printer Consumables for Most FDM 3D Printers, Dimensional Accuracy +/- 0.03 mm (White)
  • 【LOW SHRINKAGE & NO WARPING】PETG 3D Filament is extremely durable and tough, all while be odourless. Very low shrinkage and no warping, ideal for large prints. Less brittle than other material types with great chemical resistance.
  • 【NO DRAWING & NO BUBBLES】PETG 3D Filament is a rigid, tough, high performance material offering excellent clarity,adhesion light transmission and high gloss. Excellent fluidity, feeding smoothly, stable output, no jamming.
  • 【HIGH DIMENSIONAL ACCURACY】1KG (approximately 2.20 lbs) spool of PETG (Polyethylene Terephthalate Glycol-Modified) 1.75mm filament diameter (Dimensional Accuracy +/- 0.03mm) comes vacuumed sealed.
  • 【EASY TO PRINTING】PETG is known for its ease of use (like PLA) and durable strength (like ABS), no heating bed needed. Recommended Printing Temperature Range 220°C - 250°C.
  • 【WIDELY APPALICATIONS】Compatible for a variety of FDM 3D printers such as ROBO 3D, Cubify, Leapfrog, MakerBot, Reprap, Afinia, UP, Mendel, flashforge, Solidoodle 2, Printrbot LC, MakerGear M2, Felix, Reprap, Ultimaker and any other 3D printers.
Ultimaker 3d printer filament New
SUNLU Carbon Fiber PLA Filament 1kg 1.75mm 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 1kg Spool, 1.75 mm
  • 【SUNLU Material】 Carbon fiber Polycarbonate - Color: Black - Weight: 1kg (approximately 2.20lbs)/Spool
  • 【SUNLU 3D Filament Size】: 1.75mm (Tolerance Level : ± 0.02mm) - Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.20"
  • 【Recommended Printing Temp/Nozzle Temperature】 190-230°C (374-446°F), Base Plate Temperature: 60-80°C(140-176°F)
  • 【Performance Advantages】 SUNLU Carbon fiber PLA filament has perfect dimensional stability for warp free printing, excellent layer adhesion, and easy support removal
  • 【100% Environmental Friendly】 Carbon Fiber filament 100% Biodegradable, ultimately generates carbon dioxide and water without polluting the environment. Comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances.
Ultimaker 3d printer filament New
PETG Filament 1.75mm,3d Printer Filament,Dimensional Accuracy + - 0.02mm,1kg (2.2 Lbs) Spool 3D Printing Filament Black Petg 1.75mm
  • 【PETG Filament】excellent Clarity,Light Transmission And High Gloss.high Toughness.excellent Impact Strength.chemical Resistance.good Stability.no Cracking.no Warping.environmental Friendly.not-toxic And Low odor.
  • 【Stable Dimensional Tolerance】minimum Tolerance And Low Warping To Ensure Consistent Feeding And Stable Prints,No Clogging,Extremely High Successful Rate,Resulting In Printed Parts That Have An Outstanding Surface Finish And Are Highly precise.
  • 【Stable Dimensional Tolerance】minimum Tolerance And Low Warping To Ensure Consistent Feeding And Stable Prints,No Clogging,Extremely High Successful Rate,Resulting In Printed Parts That Have An Outstanding Surface Finish And Are Highly precise.
  • 【High Compatibility】compatible With ALL FDM 3D Printers (With Heated Beds):Reprap,Afinia,Makerbot,Printrbot,Ultimaker,Airwolf,Makergear,Up!,Lulzbot,Flashforge,Solidoodle,Delta,Mbot,Type A,3d Pen(3doodler Pen)
  • 【Vacuumed Sealed Packaging】 Filament Comes In A Sealed Vacuum Bag With A Desiccant Bag To Keep It Dry And Keep Out Dust And Foreign Particles,Prevent Nozzle Jams And Yield Smooth 3d models.
Ultimaker 3d printer filament New
CARRYKT 3D Printer Parts Heaterblock Ultimaker 2 + UM2 Dual Heads Extruder Block Kit Nozzles 0.4mm Hot End 1.75mm Filament
  • 100% brand new and high quality
  • Made of high-quality metal material, durable, firm and has a long service life.
  • Advanced thick PTFE parts, more stable, durable and reliable to use.
  • Expansion: It can be equipped with dual air duct cooling fan and fan, 2010 cooling fan, etc.
  • Easy and simple to use and operate. Good accessories for 3D printer parts.

Ultimaker 3d printer filament | Where to buy?

If you are asking yourself where to buy Ultimaker 3d printer filament? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Ultimaker 3d printer filament, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Ultimaker 3d printer filament and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Ultimaker 3d printer filament may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon.

The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases.

Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Ultimaker 3d printer filament used.

Ultimaker 3d printer filament | Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount.

TIANSE PETG 3D Printer Filament White, 1.75mm 1KG Spool(2.2lbs) 3D Printer Consumables for Most FDM 3D Printers, Dimensional Accuracy +/- 0.03 mm (White)
  • 【LOW SHRINKAGE & NO WARPING】PETG 3D Filament is extremely durable and tough, all while be odourless. Very low shrinkage and no warping, ideal for large prints. Less brittle than other material types with great chemical resistance.
  • 【NO DRAWING & NO BUBBLES】PETG 3D Filament is a rigid, tough, high performance material offering excellent clarity,adhesion light transmission and high gloss. Excellent fluidity, feeding smoothly, stable output, no jamming.
  • 【HIGH DIMENSIONAL ACCURACY】1KG (approximately 2.20 lbs) spool of PETG (Polyethylene Terephthalate Glycol-Modified) 1.75mm filament diameter (Dimensional Accuracy +/- 0.03mm) comes vacuumed sealed.
  • 【EASY TO PRINTING】PETG is known for its ease of use (like PLA) and durable strength (like ABS), no heating bed needed. Recommended Printing Temperature Range 220°C - 250°C.
  • 【WIDELY APPALICATIONS】Compatible for a variety of FDM 3D printers such as ROBO 3D, Cubify, Leapfrog, MakerBot, Reprap, Afinia, UP, Mendel, flashforge, Solidoodle 2, Printrbot LC, MakerGear M2, Felix, Reprap, Ultimaker and any other 3D printers.
CCTREE 1.75mm PETG 3D Printer Filament 1kg Spool (2.2lbs) for Creality CR-10, Ender 3 Pro,Tevo Anet 3D Printer. Transparent
  • Diameter: 1.75mm; Length: 380m; Net weight: 1kg (2.2lbs). Tolerance ± 0.03mm. Spool Size: diameter 195mm + inner hub 55mm height 60mm.
  • 100% virgin material without cheap plastic fillers or regrind. Vacuum sealed with desiccant.
  • Glossy type finish. Long-term keeping the natural color; excellent toughness, More wearable and weathering proof. Advanced spooling technique to avoid filament tangling.
  • Printing Temperature: 220-260°C (428-500°F), depending on printer model. Recommended bed temperature: 50-70°C (122-158°F).
  • CCTREE filament Compatible with Creality, Makerbot, UP, Afinia, Ultimaker,Builder, Felix, FlashForge, Monoprice, XYZprinting, Alunar and other desktop and industrial FDM 3D printers.
LEE FUNG PLA Plus(PLA+) 3D Printer Filament 1.75mm 2.2lbs with Spool (Silk Green)
  • This filament has strong toughness and not easy to break
  • PLA PLUS is more resilient and smooth than PLA whether you are a novice have a pleasant printing experience.
  • Feed smootyly and constantly without colgging the nozze or extruder.
  • 1.75mm Filament Diameter (Tolerance: ± 0.05mm), recommended print temperature: 392-446℉(200-230℃), Spool Diameter: 7.87inch, Spool Height: 2.83inch
  • High Compatibility - Suitable for FDM 3D printer, like Makerbot, Ultimaker, Mbot Cube, UP plus, Mendel, Prusa, series, etc
LEE FUNG PLA Plus(PLA+) 3D Printer Filament 1.75mm 2.2lbs with Spool(Silk Viiolet Blue)
  • This filament has strong toughness and not easy to break
  • PLA PLUS is more resilient and smooth than PLA whether you are a novice have a pleasant printing experience.
  • Feed smootyly and constantly without colgging the nozze or extruder.
  • 1.75mm Filament Diameter (Tolerance: ± 0.05mm), recommended print temperature: 392-446℉(200-230℃), Spool Diameter: 7.87inch, Spool Height: 2.83inch
  • High Compatibility - Suitable for FDM 3D printer, like Makerbot, Ultimaker, Mbot Cube, UP plus, Mendel, Prusa, series, etc
Blue Flexible 3D Printer Filament 1.75mm 1kg
  • 1.75mm PET 3D Printing Filament. The Consistency and Quality of Each Roll of T-Glase is Very Important. Rolls are made in the United States.
  • Extrusion Temperature: 238C - 245C - Every Roll is Laser Measured to Ensure Quality, Providing You With Dimensionally Accurate 3D Prints.
  • Strong, Good Looking 3D Prints Help Make T-Glase a Well Liked Filament Around the World.
  • There Are Plenty of Standard, Highly Commoditized 3D Printing Materials. T-Glase is Not One of Them. Made from Premium Resins.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Ultimaker 3d printer filament | Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits.

By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Ultimaker 3d printer filament.

Rating: 3.4 of 5 - 25 votes
1 Star2 Stars3 Stars4 Stars5 Stars (25 votes, average: 3.40 out of 5)
Loading...

Best Deals

3d printer dial indicator Reviews and Best Deals


Mooz 3d printer Reviews and Best Deals


Sls 3d printer for sale Reviews and Best Deals