Ultimaker 2 extended plus 3d printer Reviews and Best Deals

Online product reviews and comparisons for Ultimaker 2 extended plus 3d printer.

Latest Ultimaker 2 extended plus 3d printer
Samje Olsson Block Kit for Ultimaker 2 / UM2 3D Printer Hotend - 3.0mm Detachable 0.25mm / 0.4mm / 0.6mm / 0.8mm nozzles
  • This Olsson Block hotend kit fits for Ultimaker 2 / UM2
  • Have four kinds of nozzles (0.25mm/0.4mm/0.6mm/0.8mm) and you can change the nozzles easily.
  • Fits for 3.0mm filament
Latest Ultimaker 2 extended plus 3d printer
SIQUK 2 Pieces PTFE Teflon Tube (2 Meters) + 4 Pieces PC4-M6 Quick Fitting + 4 Pieces PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament
  • Teflon Tube: outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3; it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260℃
  • PC4-M6 fittings: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable
  • PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer
  • Installation: connecting by the outer thread of the quick fitting, easy to install
Latest Ultimaker 2 extended plus 3d printer
Official Creality Ender 3 Max Upgraded 3D Printer with Silent Motherboard, Meanwell Power Supply, Tempered Carborundum Glass Plate, Large Print Size 300x300x340mm and All Metal Extruder
  • Meanwell Power Supply: Ender 3 Max comes with UL Certified power supply which with a stable output ensuring the temperature fluctuations are minimized and protecting your printer from unexpected power surges. It can heat the hot bed to 110℃ in around 10 minutes.
  • Tempered Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.
  • All Metal Extruder, Filament Detector, Dual Cooling Fans in Hot End Kit 2 Sides : promotes better printing result, prevent filament wasting and reduces filament blockage.
  • Adopted TMC2208 Silent Driver for X Axis and Y Axis: reduce noise and wobbling of x, y motors, smoother motion and quieter printing process.
  • Quick Installation: Creality ender 3 max comes almost assembled, which is much easier to assemble than Ender 3. You only need to spend few minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
Latest Ultimaker 2 extended plus 3d printer
ANYCUBIC 3D Printer Mega S All Metal Frame and Updated Extruder, FDM DIY Printer Works, Free Test Filament with TPU/PLA/ABS 210x210x205mm Size
  • Powerful Extruder: Anycubic mega s updated extruder greatly reduces the risk of clogged nozzle and bad extrusion to provide a better printing experience of flexible
  • Filament Sensor: Automatic printing pause when filament runs out, resume after filament re-load with just one click
  • Qucik Assembly: 3 steps to set up the printer with fix 8 screws within minutes not only to an expert user but also to beginner
  • Ultrabase Platform: 3D printer platform is covered a layer of patented microporous to provide excellent adhesion. And easy to take off the model from the platform after it cool down
  • Suspended Filament Rack: 3D fdm printer One-piece hanging design makes the feeding of filament more smoother, save space and more convenient
Latest Ultimaker 2 extended plus 3d printer
Comgrow BL Touch Version 3.1 Auto-Leveling for Creality 3D Printer Ender 3 / Ender 3 Pro/Emder-5
  • BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • BLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensor. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release & Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.
  • Self-test : The push pin operate two times in a test when the power is on.
  • Alarm : The LED light blinks if a problem was found on a self-test or during operation.
  • Wiring defect indicator : Blue and Red LED for indicating wiring defects.
Latest Ultimaker 2 extended plus 3d printer
Upgraded Ender 3 Extruder, Vibury MK8 Extruder Aluminum Drive Feed Replacement 3D Printer Extruders Kit for Creality Ender 3/3 Pro CR-10, CR-10S, CR-10 S4, CR-10 S5 Right Hand Version
  • Upgrade Aluminum Replacement: Full metal aluminum alloy. MK8 extruder drive feed kit, can replace acrylic parts of Creality 3D Printers CR-10 Series Ender 3/3 Pro CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
  • Easy to Install: All you do is unbolt the old original plastic extruder and screw in the new "Metal Extruder", then it is ready to print. Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame.
  • Stable and Durable: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hot end include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.
  • Advantages: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers' performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
  • Buy with confidence: For 12 months after the date of purchase, we take care of all quality-related issues with a Money Back Or Products Exchange Guarantee.
Latest Ultimaker 2 extended plus 3d printer
Comgrow Creality 3D Ender 3 Pro 3D Printer with Cmagnet Build Plateform Surface 220x220x250mm Print Size
  • Upgrade Version: This is the upgrade version of Creality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size.
  • Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
  • Improved Mechanical Properties:The Ender 3 Pro has been redesigned with a more sturdy, 40×40 aluminum extrusion for the Y-axis base. This should improve the overall stability of the printing surface.
    Semi-assembled Kit: several assembled parts This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
  • WHAT CAN WE DO: As an authorised reseller of Creality 3D, we can offer 100% original products for you. And also can offer you professional customer service.
Latest Ultimaker 2 extended plus 3d printer
TENLOG TL-D3 Pro 3D Printer, Independent Dual Extruder 3D Printer with Upgrade Borosilicate Glass Bed,Silent Mainboards TMC2208 Drive Support PVA TPU ABS PLA,Direct Feed FDM 3D Printer 300x300x350mm
  • 【Independent Dual Extruder Design】Our TL-D3 Pro dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual material printing mode, you can get two color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
  • 【Self-developed Silent Motherboard 】The TL-D3 Pro built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
  • 【Easy to Assemble】It comes with several assembled parts. You can assemble the 3D printer in 3 steps, with its user manual, in about 5 minutes.
  • 【Warranty and Service】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
Latest Ultimaker 2 extended plus 3d printer
Comgrow Creality Ender-3 3D Printer Aluminum DIY with Resume Print 220x220x250mm Print Size
  • E Axis working: The E axis motor will start work when the nozzle temperature reaches over 185℃, then before starting printing, please remember to heat the nozzle temperature first.
  • Easy and quick assembly: It is assembled with a few parts, 20 screws can be assembled in just 2 hours.
  • Extrusion reduces the risk of clogging and poor displacement; V-shape with POM wheels make moving noiseless, smooth and constant.
  • Strict test: 24 hours for key components before delivery and real-time technical support. Secure power supply guaranteed. Culture medium reaches 110 ℃ in just 5 minutes.
  • Note: As an authorized manufacturer, we, Comgrow, offer you 100% Creality 3 printers as well as technical support.

Buy Ultimaker 2 extended plus 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Ultimaker 2 extended plus 3d printer, buy Ultimaker 2 extended plus 3d printer directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Ultimaker 2 extended plus 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


Best
Samje Olsson Block Kit for Ultimaker 2 / UM2 3D Printer Hotend - 3.0mm Detachable 0.25mm / 0.4mm / 0.6mm / 0.8mm nozzles
  • This Olsson Block hotend kit fits for Ultimaker 2 / UM2
  • Have four kinds of nozzles (0.25mm/0.4mm/0.6mm/0.8mm) and you can change the nozzles easily.
  • Fits for 3.0mm filament
Best
SIQUK 2 Pieces PTFE Teflon Tube (2 Meters) + 4 Pieces PC4-M6 Quick Fitting + 4 Pieces PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament
  • Teflon Tube: outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3; it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260℃
  • PC4-M6 fittings: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable
  • PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer
  • Installation: connecting by the outer thread of the quick fitting, easy to install
Best
Official Creality Ender 3 Max Upgraded 3D Printer with Silent Motherboard, Meanwell Power Supply, Tempered Carborundum Glass Plate, Large Print Size 300x300x340mm and All Metal Extruder
  • Meanwell Power Supply: Ender 3 Max comes with UL Certified power supply which with a stable output ensuring the temperature fluctuations are minimized and protecting your printer from unexpected power surges. It can heat the hot bed to 110℃ in around 10 minutes.
  • Tempered Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.
  • All Metal Extruder, Filament Detector, Dual Cooling Fans in Hot End Kit 2 Sides : promotes better printing result, prevent filament wasting and reduces filament blockage.
  • Adopted TMC2208 Silent Driver for X Axis and Y Axis: reduce noise and wobbling of x, y motors, smoother motion and quieter printing process.
  • Quick Installation: Creality ender 3 max comes almost assembled, which is much easier to assemble than Ender 3. You only need to spend few minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
Best
ANYCUBIC 3D Printer Mega S All Metal Frame and Updated Extruder, FDM DIY Printer Works, Free Test Filament with TPU/PLA/ABS 210x210x205mm Size
  • Powerful Extruder: Anycubic mega s updated extruder greatly reduces the risk of clogged nozzle and bad extrusion to provide a better printing experience of flexible
  • Filament Sensor: Automatic printing pause when filament runs out, resume after filament re-load with just one click
  • Qucik Assembly: 3 steps to set up the printer with fix 8 screws within minutes not only to an expert user but also to beginner
  • Ultrabase Platform: 3D printer platform is covered a layer of patented microporous to provide excellent adhesion. And easy to take off the model from the platform after it cool down
  • Suspended Filament Rack: 3D fdm printer One-piece hanging design makes the feeding of filament more smoother, save space and more convenient
Best
Upgraded Ender 3 Extruder, Vibury MK8 Extruder Aluminum Drive Feed Replacement 3D Printer Extruders Kit for Creality Ender 3/3 Pro CR-10, CR-10S, CR-10 S4, CR-10 S5 Right Hand Version
  • Upgrade Aluminum Replacement: Full metal aluminum alloy. MK8 extruder drive feed kit, can replace acrylic parts of Creality 3D Printers CR-10 Series Ender 3/3 Pro CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
  • Easy to Install: All you do is unbolt the old original plastic extruder and screw in the new "Metal Extruder", then it is ready to print. Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame.
  • Stable and Durable: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hot end include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.
  • Advantages: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers' performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
  • Buy with confidence: For 12 months after the date of purchase, we take care of all quality-related issues with a Money Back Or Products Exchange Guarantee.

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Ultimaker 2 extended plus 3d printer

Here is the ranking of the best Ultimaker 2 extended plus 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Ultimaker 2 extended plus 3d printer and read the reviews left by real customers, see the Ultimaker 2 extended plus 3d printer ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Ultimaker 2 extended plus 3d printer New
Demason 3D Printer Creality Upgrade Aluminum Parts MK8 Extruder Alloy Block Bowden Extruder 1.75mm Filament for Ender3/Pro, Ender5/Plus, CR-10S Pro, CR-10 V2
  • This gray metal MK8 extruder is an original upgrade replacement part for Creality Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus and other bowden 3D printer.
  • Upgraded version, it works better than original plastic stock extruder, make loading filament much easier and smoother, no worries about filament scraping or breaking.
  • Easy to install, the extruder DIY kit comes with a instruction on how to put it together, which makes it more easy to install.
  • Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG.
  • If you have any questions during the using process, just feel free to contact us, and we will solve in 24 hours.
Ultimaker 2 extended plus 3d printer New
Demason 3D Printer Creality Ender 3 Upgrade Extruder Aluminum MK8 Bowden Extruder 1.75mm Filament for Ender 3, Ender 3 Pro, Ender 3X, CR-10, CR-10S, CR-10S4 and CR-10S5
  • This gray metal MK8 extruder is an original upgrade replacement part for Creality Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus and other bowden 3D printer.
  • Easy to install, the extruder DIY kit comes with a instruction on how to put it together, which makes it more easy to install.
  • Upgraded version, it works better than original plastic stock extruder, make loading filament much easier and smoother, no worries about filament scraping or breaking.
  • Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG.
  • If you have any questions during the using process, just feel free to contact us, and we will solve in 24 hours.
Ultimaker 2 extended plus 3d printer New
VIKTK MK10 Extruder Hotend Kit With M3 Hex Thermistor Installed In Fit For DIY WANHAO Duplicator I3 PLUS 3d Printer (Color : BrassNozzle)
  • Item Type: Extruder
  • MPN: HEMK10A
  • Nozzle available: stailess steel and brass
  • Made of high-quality materials, strong and durable.
  • High quality and good performance ensure the efficient operation of the 3D printer.
Ultimaker 2 extended plus 3d printer New
3DTouch Auto Bed Leveling Sensor Kit High Precision Compatible with Creality Ender-3/3S/V2 Ultimaker 2 Anycubic Mega Kossel Wanhao i3 3D Printer
  • Small size, simple structure. Through the Hall effect control, provides high precision leveling.
  • Intelligent 3D printer automatic leveling sensor based on open source, making leveling easier.
  • With a compact and simple structure, it can be easily applied and makes the printing experience better.
  • Intelligent self check, LED alarm, high precision, give you a pleasant printing experience.
  • Compatible with Creality Ender-3/3S/V2, Ultimaker 2, Anycubic mega, Kossel, wanhao i3, etc.
Ultimaker 2 extended plus 3d printer New
Ultimaker 2 extended plus 3d printer New
Official Creality Ender 3 Max Upgraded 3D Printer with Silent Motherboard, Meanwell Power Supply, Tempered Carborundum Glass Plate, Large Print Size 300x300x340mm and All Metal Extruder
  • Meanwell Power Supply: Ender 3 Max comes with UL Certified power supply which with a stable output ensuring the temperature fluctuations are minimized and protecting your printer from unexpected power surges. It can heat the hot bed to 110℃ in around 10 minutes.
  • Tempered Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.
  • All Metal Extruder, Filament Detector, Dual Cooling Fans in Hot End Kit 2 Sides : promotes better printing result, prevent filament wasting and reduces filament blockage.
  • Adopted TMC2208 Silent Driver for X Axis and Y Axis: reduce noise and wobbling of x, y motors, smoother motion and quieter printing process.
  • Quick Installation: Creality ender 3 max comes almost assembled, which is much easier to assemble than Ender 3. You only need to spend few minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
Ultimaker 2 extended plus 3d printer New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Ultimaker 2 extended plus 3d printer New
Official Creality CR-6 SE Leveling-free 3D Printer(Non-Kickstarter Version)with 32 Bit Silent Motherboard, Auto Bed leveling, Upgraded Extruder Build Volumn 235x235x250MM
  • 【Innovative Leveling-free Tech】 Featuring an innovative leveling-free device which is designed with a smart pressure sensor to truly achieve hassle-free and intelligently automatic platform leveling, greatly improving bed adhesion and print quality. CR-6 SE is factory pre-leveled and replace the leveling nuts on the Ender 3/CR-10, making the printing much easier.
  • 【Modularized Nozzle】 The CR-6 SE 3D printer includes a modularized nozzle for encouraging ease in nozzle maintenance and tinkering, which allows users to replace and substitute components with ease. The heat sink, heat block, teflon tube, and hotend are all deconstructable. A set of powerful cooling fans enables superior control over filament extrusion and retraction. The hotend also houses an filament runout sensor to pause prints when required.
  • 【Upgraded Dependable Extruder】 With its compact and reliable extruder, you know that a smoother extrusion and an easier filament feed will ultimately generate faster, quieter and smoother prints. Yes, this is what perfect 3D printing is all about! the new extruder design makes loading the filament quick and painless.
  • 【Silent Motherboard with Trinamic Driver】 A silent chipset is added to the CR-6 SE. Its latest trinamic driver 2208 helps to ensure that voltage control, fast movement, and printing in silence are a given. Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10.
  • 【Easy Assemble】 In comparison to an Ender 3, CR-6 SE comes almost assembled. You only need to spend 5 minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
Ultimaker 2 extended plus 3d printer New
No-Branded 3d Printer 3D Printer 4Max Pro Modular Design High Precision Plus Size Desktop Impresora 3d Printer Diy Kit With Auto Power Off
  • It is easy to operate. If you have any question about the product and operations, you can contact with us. We staff will reply you within 24 hours. It is the best honor to serve you.
  • Technology: FDM (Fused Deposition Modeling)
  • Build Size: 270mm(L)×205(W)×205mm(H)
  • Layer Resolution: 0.05-0.3 mm
  • Positioning Accuracy: X/Y/Z 0.01/0.0125/0.00125mm

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Ultimaker 2 extended plus 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Ultimaker 2 extended plus 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

Official Creality Ender 3 Max Upgraded 3D Printer with Silent Motherboard, Meanwell Power Supply, Tempered Carborundum Glass Plate, Large Print Size 300x300x340mm and All Metal Extruder
  • Meanwell Power Supply: Ender 3 Max comes with UL Certified power supply which with a stable output ensuring the temperature fluctuations are minimized and protecting your printer from unexpected power surges. It can heat the hot bed to 110℃ in around 10 minutes.
  • Tempered Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.
  • All Metal Extruder, Filament Detector, Dual Cooling Fans in Hot End Kit 2 Sides : promotes better printing result, prevent filament wasting and reduces filament blockage.
  • Adopted TMC2208 Silent Driver for X Axis and Y Axis: reduce noise and wobbling of x, y motors, smoother motion and quieter printing process.
  • Quick Installation: Creality ender 3 max comes almost assembled, which is much easier to assemble than Ender 3. You only need to spend few minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
VIKTK MK10 Extruder Hotend Kit With M3 Hex Thermistor Installed In Fit For DIY WANHAO Duplicator I3 PLUS 3d Printer (Color : BrassNozzle)
  • Item Type: Extruder
  • MPN: HEMK10A
  • Nozzle available: stailess steel and brass
  • Made of high-quality materials, strong and durable.
  • High quality and good performance ensure the efficient operation of the 3D printer.
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Demason 3D Printer Creality Upgrade Aluminum Parts MK8 Extruder Alloy Block Bowden Extruder 1.75mm Filament for Ender3/Pro, Ender5/Plus, CR-10S Pro, CR-10 V2
  • This gray metal MK8 extruder is an original upgrade replacement part for Creality Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus and other bowden 3D printer.
  • Upgraded version, it works better than original plastic stock extruder, make loading filament much easier and smoother, no worries about filament scraping or breaking.
  • Easy to install, the extruder DIY kit comes with a instruction on how to put it together, which makes it more easy to install.
  • Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG.
  • If you have any questions during the using process, just feel free to contact us, and we will solve in 24 hours.

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Ultimaker 2 extended plus 3d printer actually costs.

Latest Ultimaker 2 extended plus 3d printer
Samje Olsson Block Kit for Ultimaker 2 / UM2 3D Printer Hotend - 3.0mm Detachable 0.25mm / 0.4mm / 0.6mm / 0.8mm nozzles
  • This Olsson Block hotend kit fits for Ultimaker 2 / UM2
  • Have four kinds of nozzles (0.25mm/0.4mm/0.6mm/0.8mm) and you can change the nozzles easily.
  • Fits for 3.0mm filament
Latest Ultimaker 2 extended plus 3d printer
SIQUK 2 Pieces PTFE Teflon Tube (2 Meters) + 4 Pieces PC4-M6 Quick Fitting + 4 Pieces PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament
  • Teflon Tube: outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3; it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260℃
  • PC4-M6 fittings: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable
  • PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer
  • Installation: connecting by the outer thread of the quick fitting, easy to install
Latest Ultimaker 2 extended plus 3d printer
Official Creality Ender 3 Max Upgraded 3D Printer with Silent Motherboard, Meanwell Power Supply, Tempered Carborundum Glass Plate, Large Print Size 300x300x340mm and All Metal Extruder
  • Meanwell Power Supply: Ender 3 Max comes with UL Certified power supply which with a stable output ensuring the temperature fluctuations are minimized and protecting your printer from unexpected power surges. It can heat the hot bed to 110℃ in around 10 minutes.
  • Tempered Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.
  • All Metal Extruder, Filament Detector, Dual Cooling Fans in Hot End Kit 2 Sides : promotes better printing result, prevent filament wasting and reduces filament blockage.
  • Adopted TMC2208 Silent Driver for X Axis and Y Axis: reduce noise and wobbling of x, y motors, smoother motion and quieter printing process.
  • Quick Installation: Creality ender 3 max comes almost assembled, which is much easier to assemble than Ender 3. You only need to spend few minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
Latest Ultimaker 2 extended plus 3d printer
ANYCUBIC 3D Printer Mega S All Metal Frame and Updated Extruder, FDM DIY Printer Works, Free Test Filament with TPU/PLA/ABS 210x210x205mm Size
  • Powerful Extruder: Anycubic mega s updated extruder greatly reduces the risk of clogged nozzle and bad extrusion to provide a better printing experience of flexible
  • Filament Sensor: Automatic printing pause when filament runs out, resume after filament re-load with just one click
  • Qucik Assembly: 3 steps to set up the printer with fix 8 screws within minutes not only to an expert user but also to beginner
  • Ultrabase Platform: 3D printer platform is covered a layer of patented microporous to provide excellent adhesion. And easy to take off the model from the platform after it cool down
  • Suspended Filament Rack: 3D fdm printer One-piece hanging design makes the feeding of filament more smoother, save space and more convenient
Latest Ultimaker 2 extended plus 3d printer
Comgrow BL Touch Version 3.1 Auto-Leveling for Creality 3D Printer Ender 3 / Ender 3 Pro/Emder-5
  • BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • BLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensor. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release & Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.
  • Self-test : The push pin operate two times in a test when the power is on.
  • Alarm : The LED light blinks if a problem was found on a self-test or during operation.
  • Wiring defect indicator : Blue and Red LED for indicating wiring defects.
Latest Ultimaker 2 extended plus 3d printer
Upgraded Ender 3 Extruder, Vibury MK8 Extruder Aluminum Drive Feed Replacement 3D Printer Extruders Kit for Creality Ender 3/3 Pro CR-10, CR-10S, CR-10 S4, CR-10 S5 Right Hand Version
  • Upgrade Aluminum Replacement: Full metal aluminum alloy. MK8 extruder drive feed kit, can replace acrylic parts of Creality 3D Printers CR-10 Series Ender 3/3 Pro CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
  • Easy to Install: All you do is unbolt the old original plastic extruder and screw in the new "Metal Extruder", then it is ready to print. Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame.
  • Stable and Durable: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hot end include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.
  • Advantages: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers' performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
  • Buy with confidence: For 12 months after the date of purchase, we take care of all quality-related issues with a Money Back Or Products Exchange Guarantee.
Latest Ultimaker 2 extended plus 3d printer
Comgrow Creality 3D Ender 3 Pro 3D Printer with Cmagnet Build Plateform Surface 220x220x250mm Print Size
  • Upgrade Version: This is the upgrade version of Creality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size.
  • Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
  • Improved Mechanical Properties:The Ender 3 Pro has been redesigned with a more sturdy, 40×40 aluminum extrusion for the Y-axis base. This should improve the overall stability of the printing surface.
    Semi-assembled Kit: several assembled parts This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
  • WHAT CAN WE DO: As an authorised reseller of Creality 3D, we can offer 100% original products for you. And also can offer you professional customer service.
Latest Ultimaker 2 extended plus 3d printer
TENLOG TL-D3 Pro 3D Printer, Independent Dual Extruder 3D Printer with Upgrade Borosilicate Glass Bed,Silent Mainboards TMC2208 Drive Support PVA TPU ABS PLA,Direct Feed FDM 3D Printer 300x300x350mm
  • 【Independent Dual Extruder Design】Our TL-D3 Pro dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual material printing mode, you can get two color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
  • 【Self-developed Silent Motherboard 】The TL-D3 Pro built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
  • 【Easy to Assemble】It comes with several assembled parts. You can assemble the 3D printer in 3 steps, with its user manual, in about 5 minutes.
  • 【Warranty and Service】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
Latest Ultimaker 2 extended plus 3d printer
Comgrow Creality Ender-3 3D Printer Aluminum DIY with Resume Print 220x220x250mm Print Size
  • E Axis working: The E axis motor will start work when the nozzle temperature reaches over 185℃, then before starting printing, please remember to heat the nozzle temperature first.
  • Easy and quick assembly: It is assembled with a few parts, 20 screws can be assembled in just 2 hours.
  • Extrusion reduces the risk of clogging and poor displacement; V-shape with POM wheels make moving noiseless, smooth and constant.
  • Strict test: 24 hours for key components before delivery and real-time technical support. Secure power supply guaranteed. Culture medium reaches 110 ℃ in just 5 minutes.
  • Note: As an authorized manufacturer, we, Comgrow, offer you 100% Creality 3 printers as well as technical support.

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Ultimaker 2 extended plus 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Ultimaker 2 extended plus 3d printer which are among the cheapest on the market. Just scroll through the list to find Ultimaker 2 extended plus 3d printer the cheapest products.

Catalog

The product Ultimaker 2 extended plus 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.

Ultimaker 2 extended plus 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Ultimaker 2 extended plus 3d printer New
Demason 3D Printer Creality Upgrade Aluminum Parts MK8 Extruder Alloy Block Bowden Extruder 1.75mm Filament for Ender3/Pro, Ender5/Plus, CR-10S Pro, CR-10 V2
  • This gray metal MK8 extruder is an original upgrade replacement part for Creality Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus and other bowden 3D printer.
  • Upgraded version, it works better than original plastic stock extruder, make loading filament much easier and smoother, no worries about filament scraping or breaking.
  • Easy to install, the extruder DIY kit comes with a instruction on how to put it together, which makes it more easy to install.
  • Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG.
  • If you have any questions during the using process, just feel free to contact us, and we will solve in 24 hours.
Ultimaker 2 extended plus 3d printer New
Demason 3D Printer Creality Ender 3 Upgrade Extruder Aluminum MK8 Bowden Extruder 1.75mm Filament for Ender 3, Ender 3 Pro, Ender 3X, CR-10, CR-10S, CR-10S4 and CR-10S5
  • This gray metal MK8 extruder is an original upgrade replacement part for Creality Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus and other bowden 3D printer.
  • Easy to install, the extruder DIY kit comes with a instruction on how to put it together, which makes it more easy to install.
  • Upgraded version, it works better than original plastic stock extruder, make loading filament much easier and smoother, no worries about filament scraping or breaking.
  • Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG.
  • If you have any questions during the using process, just feel free to contact us, and we will solve in 24 hours.
Ultimaker 2 extended plus 3d printer New
VIKTK MK10 Extruder Hotend Kit With M3 Hex Thermistor Installed In Fit For DIY WANHAO Duplicator I3 PLUS 3d Printer (Color : BrassNozzle)
  • Item Type: Extruder
  • MPN: HEMK10A
  • Nozzle available: stailess steel and brass
  • Made of high-quality materials, strong and durable.
  • High quality and good performance ensure the efficient operation of the 3D printer.
Ultimaker 2 extended plus 3d printer New
3DTouch Auto Bed Leveling Sensor Kit High Precision Compatible with Creality Ender-3/3S/V2 Ultimaker 2 Anycubic Mega Kossel Wanhao i3 3D Printer
  • Small size, simple structure. Through the Hall effect control, provides high precision leveling.
  • Intelligent 3D printer automatic leveling sensor based on open source, making leveling easier.
  • With a compact and simple structure, it can be easily applied and makes the printing experience better.
  • Intelligent self check, LED alarm, high precision, give you a pleasant printing experience.
  • Compatible with Creality Ender-3/3S/V2, Ultimaker 2, Anycubic mega, Kossel, wanhao i3, etc.
Ultimaker 2 extended plus 3d printer New
Ultimaker 2 extended plus 3d printer New
Official Creality Ender 3 Max Upgraded 3D Printer with Silent Motherboard, Meanwell Power Supply, Tempered Carborundum Glass Plate, Large Print Size 300x300x340mm and All Metal Extruder
  • Meanwell Power Supply: Ender 3 Max comes with UL Certified power supply which with a stable output ensuring the temperature fluctuations are minimized and protecting your printer from unexpected power surges. It can heat the hot bed to 110℃ in around 10 minutes.
  • Tempered Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.
  • All Metal Extruder, Filament Detector, Dual Cooling Fans in Hot End Kit 2 Sides : promotes better printing result, prevent filament wasting and reduces filament blockage.
  • Adopted TMC2208 Silent Driver for X Axis and Y Axis: reduce noise and wobbling of x, y motors, smoother motion and quieter printing process.
  • Quick Installation: Creality ender 3 max comes almost assembled, which is much easier to assemble than Ender 3. You only need to spend few minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
Ultimaker 2 extended plus 3d printer New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Ultimaker 2 extended plus 3d printer New
Official Creality CR-6 SE Leveling-free 3D Printer(Non-Kickstarter Version)with 32 Bit Silent Motherboard, Auto Bed leveling, Upgraded Extruder Build Volumn 235x235x250MM
  • 【Innovative Leveling-free Tech】 Featuring an innovative leveling-free device which is designed with a smart pressure sensor to truly achieve hassle-free and intelligently automatic platform leveling, greatly improving bed adhesion and print quality. CR-6 SE is factory pre-leveled and replace the leveling nuts on the Ender 3/CR-10, making the printing much easier.
  • 【Modularized Nozzle】 The CR-6 SE 3D printer includes a modularized nozzle for encouraging ease in nozzle maintenance and tinkering, which allows users to replace and substitute components with ease. The heat sink, heat block, teflon tube, and hotend are all deconstructable. A set of powerful cooling fans enables superior control over filament extrusion and retraction. The hotend also houses an filament runout sensor to pause prints when required.
  • 【Upgraded Dependable Extruder】 With its compact and reliable extruder, you know that a smoother extrusion and an easier filament feed will ultimately generate faster, quieter and smoother prints. Yes, this is what perfect 3D printing is all about! the new extruder design makes loading the filament quick and painless.
  • 【Silent Motherboard with Trinamic Driver】 A silent chipset is added to the CR-6 SE. Its latest trinamic driver 2208 helps to ensure that voltage control, fast movement, and printing in silence are a given. Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10.
  • 【Easy Assemble】 In comparison to an Ender 3, CR-6 SE comes almost assembled. You only need to spend 5 minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
Ultimaker 2 extended plus 3d printer New
No-Branded 3d Printer 3D Printer 4Max Pro Modular Design High Precision Plus Size Desktop Impresora 3d Printer Diy Kit With Auto Power Off
  • It is easy to operate. If you have any question about the product and operations, you can contact with us. We staff will reply you within 24 hours. It is the best honor to serve you.
  • Technology: FDM (Fused Deposition Modeling)
  • Build Size: 270mm(L)×205(W)×205mm(H)
  • Layer Resolution: 0.05-0.3 mm
  • Positioning Accuracy: X/Y/Z 0.01/0.0125/0.00125mm

Where to buy?

If you are asking yourself where to buy Ultimaker 2 extended plus 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Ultimaker 2 extended plus 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Ultimaker 2 extended plus 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Ultimaker 2 extended plus 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Ultimaker 2 extended plus 3d printer used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Ultimaker 2 extended plus 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

Official Creality Ender 3 Max Upgraded 3D Printer with Silent Motherboard, Meanwell Power Supply, Tempered Carborundum Glass Plate, Large Print Size 300x300x340mm and All Metal Extruder
  • Meanwell Power Supply: Ender 3 Max comes with UL Certified power supply which with a stable output ensuring the temperature fluctuations are minimized and protecting your printer from unexpected power surges. It can heat the hot bed to 110℃ in around 10 minutes.
  • Tempered Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.
  • All Metal Extruder, Filament Detector, Dual Cooling Fans in Hot End Kit 2 Sides : promotes better printing result, prevent filament wasting and reduces filament blockage.
  • Adopted TMC2208 Silent Driver for X Axis and Y Axis: reduce noise and wobbling of x, y motors, smoother motion and quieter printing process.
  • Quick Installation: Creality ender 3 max comes almost assembled, which is much easier to assemble than Ender 3. You only need to spend few minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
VIKTK MK10 Extruder Hotend Kit With M3 Hex Thermistor Installed In Fit For DIY WANHAO Duplicator I3 PLUS 3d Printer (Color : BrassNozzle)
  • Item Type: Extruder
  • MPN: HEMK10A
  • Nozzle available: stailess steel and brass
  • Made of high-quality materials, strong and durable.
  • High quality and good performance ensure the efficient operation of the 3D printer.
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Demason 3D Printer Creality Upgrade Aluminum Parts MK8 Extruder Alloy Block Bowden Extruder 1.75mm Filament for Ender3/Pro, Ender5/Plus, CR-10S Pro, CR-10 V2
  • This gray metal MK8 extruder is an original upgrade replacement part for Creality Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus and other bowden 3D printer.
  • Upgraded version, it works better than original plastic stock extruder, make loading filament much easier and smoother, no worries about filament scraping or breaking.
  • Easy to install, the extruder DIY kit comes with a instruction on how to put it together, which makes it more easy to install.
  • Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG.
  • If you have any questions during the using process, just feel free to contact us, and we will solve in 24 hours.

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Ultimaker 2 extended plus 3d printer.

Rating: 3.66 of 5 - 32 votes
1 Star2 Stars3 Stars4 Stars5 Stars (32 votes, average: 3.66 out of 5)
Loading...