Tramming 3d printer Reviews and Best Deals

Online product reviews and comparisons for Tramming 3d printer.

Latest Tramming 3d printer
Creality 3D Upgraded Version BL-Touch Heated Bed Auto Bed Leveling Sensor Kit For Ender-3 / Ender-3s / Ender-3 Pro/CR-10 3D Printer
  • Upgraded Version -This is the upgraded version of the original upgraded kit provided by Creality 3D which can be used for Creality V1/ V2 / V4.2.2 / V 4.2.7 mainboard. It include but not limited to the following 3d printer: Ender-3 / Ender-3s / Ender-3 Pro / CR-10/ CR-20 Pro/ CR-10S/ CR-10S4/ CR-10S 5
  • Genuine BLTouch - Each of our Genuine BL Touch has a QR code on PCB.
  • Simple - BLTouch can be easily applied, since it has a small and simple structure. As BLTouch works as usual auto bed leveling sensor, Gathering information & setting up your firmware will be an easy task.
  • Smart - Self-test and alarm.The push pin operate two times in a test when the power is on.The LED light blinks if a problem was found on a self-test or during operation
  • High-precision - BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
Latest Tramming 3d printer
Go Inks 500g (0.5kg) Orange 1.75mm ABS 3D Printer Filament Spool
  • Filament to be used with your 3D printing device from Go Inks
  • Contains: 1 spool of filament
  • Weight: 500g/ 0.5kg
  • Vacuum packed
  • Type and size: abs/ 1.75mm
Latest Tramming 3d printer
ANYCUBIC 3D Printer Resin LCD UV 405nm Rapid Photopolymer for LCD/DLP/SLA 3D Printers, 1000g Black
  • 【Works Well on Most 3D Printers】Giving the outstanding performances, ANYCUBIC 3d printer standard resin is suitable for most DLP or LCD 3D printers, such as ANYCUBIC PHOTON / PHOTON S, MONO, MONO X, ELEGOO Mars, Mars Pro, Proxima, LD002R, etc.
  • 【Easy to Clean】Removing 3d printing model under hot water or isopropanol is just effortless. The remaining 3d printer resin can be easily removed with isopropanol.
  • 【Great Quality】ANYCUBIC 3d photopolymer resin contains methacrylate monomers to reduce volume shrinkage during the Photocuring process, which ensures the high precision of the print model with a smooth finish. Recommended printing parameters: Bottom Exposure: ~60s; Normal Exposure: ~8s
  • 【Nice Colors】ANYCUBIC 3D printer resin with high-quality pigments and photo-initiators, the models printed with resin have a very pure and stunning color effect just like an artwork.
  • 【Safe and Secure Packaging】Leak-proof bottle fully wrapped with a plastic bubble bag and exquisitely designed package box make sure the 3d 405nm UV resin stays in place where they belong.
DISCOUNTLatest Tramming 3d printer
Creality Ender 5 Pro 3D Printer with Silent Mainboard Pre-installed,Capricorn Tube, Metal Exruder,220 * 220 * 300mm Build Volume, Removable Platform, Dual Y-Axis, Modular Design
  • Three Upgraded Based on Ender 5 - V1.1.5 Silent Motherboard pre-installed,allowing for quieter and more precise printing performance. Durable Metal Extruder provides strongers pressure while pushing filament through the nozzoles which will bolster the overall printig performance.Capricorn Premium PTFE Tube makes the Creality Ender 5 pro 3d printer better suited to print with flexible filaments and other exotic materials.
  • Stable Cubic Structure: Creality Ender 5 pro desktop 3d printer has a stable box-like frame and an increased Z-axis reach. It's not only allows for taller prints based on Ender 3 series printer, the more sturdy and steady frame improves precision for both small and big prints.
  • Resume Printing Function: Ender 5 Pro is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • More stability performance: Equipped with dual Y axis motors and down-shift Z axis, moving more smoothly, fewer points of failure and fewer headaches.
  • Beginner Friendly - Ender 5 Pro comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic construction of 3D printer.Even if you are a beginner,there is nothing to worried about.
Latest Tramming 3d printer
Latest Tramming 3d printer
Comgrow Creality 3D Ender 3 Pro 3D Printer with Cmagnet Build Plateform Surface 220x220x250mm Print Size
  • Upgrade Version: This is the upgrade version of Creality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size.
  • Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
  • Improved Mechanical Properties:The Ender 3 Pro has been redesigned with a more sturdy, 40×40 aluminum extrusion for the Y-axis base. This should improve the overall stability of the printing surface.
    Semi-assembled Kit: several assembled parts This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
  • WHAT CAN WE DO: As an authorised reseller of Creality 3D, we can offer 100% original products for you. And also can offer you professional customer service.
Latest Tramming 3d printer
Comgrow Creality Ender-3 3D Printer Aluminum DIY with Resume Print 220x220x250mm Print Size
  • E Axis working: The E axis motor will start work when the nozzle temperature reaches over 185℃, then before starting printing, please remember to heat the nozzle temperature first.
  • Easy and quick assembly: It is assembled with a few parts, 20 screws can be assembled in just 2 hours.
  • Extrusion reduces the risk of clogging and poor displacement; V-shape with POM wheels make moving noiseless, smooth and constant.
  • Strict test: 24 hours for key components before delivery and real-time technical support. Secure power supply guaranteed. Culture medium reaches 110 ℃ in just 5 minutes.
  • Note: As an authorized manufacturer, we, Comgrow, offer you 100% Creality 3 printers as well as technical support.
Latest Tramming 3d printer
ELEGOO Mars Pro MSLA 3D Printer UV Photocuring LCD 3D Printer with Matrix UV LED Light Source, Built-In Activated Carbon,Off-Line Print 4.53in(L) x 2.56in(W) x 5.9in(H) Printing Size
  • 【Higher Precision and Excellent Performance】Z axis utilizes linear guideway structure, which achieves steadier motion and greatly enhanced moving accuracy to reduce the layer lines on the 3D printed model and make the surface much smoother. The set screws of the build plate are now upgraded to larger anti-slip hexagon socket screws, which have a more stable leveling result. CNC turning CD pattern on the build plate provides a much stronger adherence, especially when printing large 3D models.
  • 【No Irritative Odor Experience】Mars Pro comes with a silicone rubber seal that can be put on the cover to prevent the resin odor from leaking. Built-in activated carbon can absorb and filter the resin odor before they are ventilated throughout the cooling fan, which gives you a fresh and safe user experience.
  • 【Light and Convenient 】Remodeled resin vat made of aluminum alloy is light yet sturdy. The USB port is relocated to the front for your convenience. Mars Pro uses a new user interface with a dark theme and simple design.
  • 【Qulity Prints and Consistent Success】Matrix light source consists of 28 50Watt UV LED lights that have uniform light emission, ensuring superior printing results, a more accurate printing size, and saves your time by 25% in layer exposure time. Mars Pro is the first resin-based 3D printer to use the sliced file of .ctb format, which reduces the file size by an average of 90% compared to .cbddlp format and significantly increases the printing success rate when printing bigger models.
  • 【Warranty and Privilege 】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded). Parts and replacements will be shipped from the overseas warehouse to offer you quality and fast customer service. Mars Pro also comes with a Myminifactory Membership Card, which gives you a privilege to millions of curated 3D objects to start your first printing on Mars Pro.
Latest Tramming 3d printer
ELEGOO Mars 2 Mono MSLA 3D Printer UV Photocuring LCD Resin 3D Printer with 6.08 inch 2K Monochrome LCD, Printing Size 129 * 80 * 150mm / 5.08 * 3.15 * 5.90inch
  • 【Fast Printing and less maintenance】Mars 2 comes with a 6.08 inch monochrome LCD of 2K HD resolution and only takes 2 seconds per layer exposure to cure resin, which could significantly enhance your printing efficiency. Mono LCD has a much longer lifespan and stable performance during long term printing, thus saves your cost.
  • 【Outstanding prints and ultra accurcy】Brand new light source structure provides more even UV light emission and working together with 2K mono LCD, the printing details and precision are greatly improved and the 3D printed models are fascinating.
  • 【Sturdy build quality】CNC machined aluminum body makes Mars 2 a very formidable machine. Newly-designed sandblasted build plate has a much stronger adherence during printing and enables consistent printing success. Built-in active carbon could absorb the fume of resin and offer you a refreshing printing experience.
  • 【Multi language interface】Mars 2 now supports 12 kinds of languages so customers across the world could operate the 3D printer more conveniently without barries.The newly added 10 languages are Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish and Portuguese.
  • 【Warranty and Service】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded).

Buy Tramming 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Tramming 3d printer, buy Tramming 3d printer directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Tramming 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


Best
Upgraded Creality 3D Printer Platforms, ENDER 3 Glass Bed, Tempered Glass Heated Bed Glass Plate Panel Build Surface Build Plate for Ender 3 Ender 3Pro Ender 5 Ender 5Pro Hot Bed, 235x235x4mm
  • 1.High-performance&Durable and Reliability: An Ideal Platform Heated Bed for 3D Printing. Integrated with heated bed: Super Flatness, Fast and uniform heating. Easy to clean by alcohol/ water. The special coating is inorganic and has a hardness of 8 Mohs, and this Creality 3d glass plate is capable to work at 400ºC. Upgraded 3D Printer Platform Tempered Glass Plate Build Surface
  • 2.High temperature Resistant & Excellent adhesion: This 3d printer heated bed glass is made of borosilicate glass, which is higher temperatures than normal sheet glass. Can be placed on top of any existing hotbed surface. Our state of the art carbon & silicone build surface provides the best adhesion in the market. It has a nice texture on surface that helps with bed adhesion. Higher temperatures, better adhesion. Perfect for those prints with difficult warping issues. Not suitable for ABS
  • 3.Super Flatness 3d printer build platform: This upgrade 3d printer hot plate offers more smooth and flat printing surface than other normal. Reduces warping, please noted that platform has to be properly leveled. This ender 3 bed is a flat, heat resistant plate.Completely flat. This heated bed platform solves that problem once and for all.It's a nice upgrade to the original aluminum base of the print surface.It level things out if there is any minor warping going on there
  • 4.No tools required for model removal: The ENDER 3 Glass Bed is great to help with the removal of prints. Once the hotbed cools back to room temperature, the glass bed will release the model which can be easily removed by hand. Large models can be easily removed using tools such as a blade.No more scrathch or stab yourself with a scraper again. Note: 1. We Suggest remove the model when the glass bed reach 55ºC. 2. please do not take the model with sharp tools
  • 5.Updated 3d printer hot bed: Small logo is printed in the bottom instead of the big CREALITY logo in the middle to avoid the printes be impinted with the CREALITY logo. After design update,the prints will have a smoother finished on the finished part. Perfect printing size 235x235x4mm. Hotbed Glass Build Plate for Creality 3D Printer Ender-3 / Ender-3 Pro Ender-5 / Ender-5 Pro Creality 3D pinter. Important Note: Do not clean with corrosive liquids, otherwise the coating will fail
Best
Go Inks 500g (0.5kg) Orange 1.75mm ABS 3D Printer Filament Spool
  • Filament to be used with your 3D printing device from Go Inks
  • Contains: 1 spool of filament
  • Weight: 500g/ 0.5kg
  • Vacuum packed
  • Type and size: abs/ 1.75mm
Best
ANYCUBIC 3D Printer Resin LCD UV 405nm Rapid Photopolymer for LCD/DLP/SLA 3D Printers, 1000g Black
  • 【Works Well on Most 3D Printers】Giving the outstanding performances, ANYCUBIC 3d printer standard resin is suitable for most DLP or LCD 3D printers, such as ANYCUBIC PHOTON / PHOTON S, MONO, MONO X, ELEGOO Mars, Mars Pro, Proxima, LD002R, etc.
  • 【Easy to Clean】Removing 3d printing model under hot water or isopropanol is just effortless. The remaining 3d printer resin can be easily removed with isopropanol.
  • 【Great Quality】ANYCUBIC 3d photopolymer resin contains methacrylate monomers to reduce volume shrinkage during the Photocuring process, which ensures the high precision of the print model with a smooth finish. Recommended printing parameters: Bottom Exposure: ~60s; Normal Exposure: ~8s
  • 【Nice Colors】ANYCUBIC 3D printer resin with high-quality pigments and photo-initiators, the models printed with resin have a very pure and stunning color effect just like an artwork.
  • 【Safe and Secure Packaging】Leak-proof bottle fully wrapped with a plastic bubble bag and exquisitely designed package box make sure the 3d 405nm UV resin stays in place where they belong.
Best
Creality Upgraded 3D Printer Platform Glass Plate Panel 235X235MM Heated Bed Glass Print Bed Build Surface with Microporous Coating for Ender-3/ Ender-3 Pro/Ender-3S/Ender-3X
  • 【Upgraded 3D Printers Glass Plate】:The Heat Bed Glass Plate 235 x 235mm is compatible with Creality 3D printer Ender-3,Ender-3S,Ender-3 pro,Ender-5
  • 【High Quality Material】: Special Glass + microporous coatings.Anti-scratch, high hardness,not easy to be broken,surface flatness is less than 0.2mm.Easy to clean with water or alcohol. Easy to remove your print by hand or with a scraper.
  • 【Excellent Adhesion】: The Creality 3d glass plate was covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models
  • 【High-performance/Durable add Reliability】: It Integrated with Heated Bed ,Super Flatness, Fast and uniform heating,and it is easy to clean with alcohol/water.The special coating is inorganic and has a hardness of 7- 8 Mohs, and it is capable to work at 400 ℃.
  • 【You should know】:1.The first layer has a hardness of 0.5H, which is easier to be scratched, but it does not affect the adhesion of the models. 2.Its color will be changed after rubbed repeatedly with alcohol, but will not affect its normal use. 3.Please do not touch the platform repeatedly by hand to avoid serious sweat
Best
ELEGOO Mars 2 Mono MSLA 3D Printer UV Photocuring LCD Resin 3D Printer with 6.08 inch 2K Monochrome LCD, Printing Size 129 * 80 * 150mm/5.08 * 3.15 * 5.90 inch
  • 【Fast Printing and less maintenance】Mars 2 comes with a 6.08 inch monochrome LCD of 2K HD resolution and only takes 2 seconds per layer exposure to cure resin, which could significantly enhance your printing efficiency. Mono LCD has a much longer lifespan and stable performance during long term printing, thus saves your cost.
  • 【Outstanding prints and ultra accurcy】Brand new light source structure provides more even UV light emission and working together with 2K mono LCD, the printing details and precision are greatly improved and the 3D printed models are fascinating.
  • 【Sturdy build quality】CNC machined aluminum body makes Mars 2 a very formidable machine. Newly-designed sandblasted build plate has a much stronger adherence during printing and enables consistent printing success. Built-in active carbon could absorb the fume of resin and offer you a refreshing printing experience.
  • 【Multi language interface】Mars 2 now supports 12 kinds of languages so customers across the world could operate the 3D printer more conveniently without barries.The newly added 10 languages are Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish and Portuguese.
  • 【Warranty and Service】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded).

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Tramming 3d printer

Here is the ranking of the best Tramming 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Tramming 3d printer and read the reviews left by real customers, see the Tramming 3d printer ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Tramming 3d printer New
ZHITING 2 Pack 3D Printer Heat Bed Power Module 3D Printer Board Expansion Board MOS Tube High Current Load Module
  • A general add-on heated bed power expansion module for 3D printer
  • Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8
  • With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A
  • Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.)
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board, According to the thermal power of the bed, please choose the appropriate power supply, with sufficient margin. If it is large power heated, we suggest 24V power supply, under the same power requirements, current is less than 12 v
Tramming 3d printer New
BIGTREETECH MMU2 DIP Filament PLA Select filament consumable port 5 colors Support TMC2209/TMC5160 Apply to prusa i3 MK3S/MK2.5S 3D Printer
  • 1. Firmware link: https://github.com/bigtreetech.
  • 2. Master chip:STM32F030C8T6.
  • 3. Used to select consumables port, Support up to 5 color printing and multiple driver models.
  • 4. Driver modes: TMC Driver-UART Mode / Driver-SPI Mode.
  • 5. 24-hour service: Don't worry about after-sales problems, please contact us if necessary, we will solve it for you.
Tramming 3d printer New
Eono by Amazon 3D Printer PLA Filament, Tangle-Free with 0.03 mm Dimensional Accuracy, 1.75 mm, 1 kg Spool, Grey
  • Neat Spooling and Tangle-Free: Premium 1.75 mm 3D filament uses layer-by-layer technology to ensure perfect spooling and neat winding; this reduces the chance of failed prints so you can tackle longer prints with ease.
  • Non-Toxic and Environmentally Friendly: Made from natural, renewable materials; non-toxic, environmentally friendly and 100% biodegradable; harm-free for the environment and the user; recommended extrusion temperature at nozzle: 190-230 °C; recommended build platform temperature: 20-70 °C.
  • High-Performance for Quality Prints: This tangle-free filament has consistent diameter and shape for less stringing and warping, minimal shrinkage, and strong layer adhesion; fewer jams and failures for smooth, continuous printing and a smoother finish.
  • Wide Compatibility with FDM 3D Printers and 3D Pens: Use with a wide variety of FDM 3D printers and 3D pens that use 1.75 mm filament including ANYCUBIC, AirWolf, Aleph Objects, BCN3D, Beeverycreative, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, etc.
  • Premium Packaging and After-Sale Service: Delivered vacuum-sealed with desiccant to ensure optimal condition on arrival, free from dust and dirt; we provide 24-hour customer service to ensure your satisfaction.
Tramming 3d printer New
ANYCUBIC Photon Zero 3D Printer, LCD Resin 3D Printer Assembled with 16X Anti-aliasing Function and UV Cooling System & Upgraded UV Module, Build Size 3.81"x2.12"x5.9", Black
  • EXCELLENT ACCURACY:Photon zero uses parallel LEDs and 16 times the anti-aliasing function to ensure that your print output has smoother details than conventional resin printers and FDM printers
  • UV COOLING SYSTEM: ANYCUBIC 3D printer photon zero equipped with the cooling system to stabilize the printing performance and to extend the life of the 3D resin printer
  • HUMANIZED DESIGN: Photon zero with markings in the resin tub and the integrated FEP film, you can easily see your amount of resin and replace the consumable FEP
  • SELF-DEVELOPED SLICING SOFTWARE:Photon workshop only takes 1 minute to cut 30MB. Supports hollowing out, filling, punching and cutting of models. Save a lot of resin. Meet custom requirements and provide better technical support
  • ENTRY-LEVEL RESIN PRINTER: The printing process can be started within 5 minutes of being placed on the build platform and the resin container. first choice for getting started with 3D resin printing,brand new UI interface, high resolution display, smooth operation
Tramming 3d printer New
ELEGOO Mars Pro 3D Printer, MSLA UV Photocuring 3D Printer with Activated Carbon Front USB Port 3.5'' Touch Screen, Matrix UV LED Light Source Off-Line Print Printing Size 115x65x150mm
  • 【What's PRO than Mars? 】BGW15CA Linear guideway with accuracy of 0.02mm, smoother, quieter and more stable. 50w Matrix LED UV light source offer more uniform light emission, curing time lower to 6s per layer. Built-in Activated Carbon Filter, additional cover rubber sealing, no need to worry about the odor of resin
  • 【Convenient and Easy to Use】The build plate has changed to CNC turning CD pattern, which provides stronger adhesion when printing. The improved translucent resin vat is lighter. The USB port has changed to front from back, it is more convenient to plug the flash drive. Mars Pro also refactored user interface with dark background and simulant icons
  • 【Add Air Filter System】Mars Pro add a rubber sealing to the upper cover to prevent the resin odor from out of the cover. The built-in activated carbon filter can absorb and eliminate odor, so there is no need to worry about resin odor during printing
  • 【Better Printing Quality】Thanks to the upgraded Matrix 28 50W UV LED light source,the uniformity of light is increased to 95%. It means more accurate print size, layer exposure time is also reduced to 6 seconds. Mars 2 support .ctb format, smaller files but greatly increase the success rate of printing of bigger models
  • 【MSLA Technology】Digital mask controls which regions of the print area are illuminated by a panel light source array. This allows every object on the built plate to be photocured simultaneously. It means an ELEGOO Mars Pro printer can print 2 and more models as quickly as one. Mars Pro MSLA printer are much faster than SLA or DLP printers
Tramming 3d printer New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
DISCOUNTTramming 3d printer New
TENLOG Hands 2 Independent Dual Extruder 3D Printer,300 Degree High Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS,220x220x250mm
  • 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
  • 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
  • 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
  • 【Warranty and Assemble】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
Tramming 3d printer New
Aibecy 3D Printer LCD Resin UV Photocuring 130 * 82 * 160mm Printing Size 2K High Resolution LCD with 3.5 Inch Touchscreen Air Filtration System Off-line Print Original Creality LD-002H
  • 1620*2560 HD resolution with high print precision. 2K HD monochrome screen, the curing time of the model is 1-4s/layer, which speeds up 10% compared with similar printers.
  • Equipped with a UV integrated light source and upgraded transmission system, the light source reaches 8000uw/cm2. Stable light source decides the higher print success rate.
  • The precision z-axis linear rail ensures that every tiny movement of z-axis is accurate under the strict requirements of x-y-axis high precision.
  • Air filtering system with activated carbon, activated carbon can effectively reduce the emission of odor from resin and give you a comfortable environment.
  • Manually leveling system simplifies leveling process. 3.5 inch full color touchscreen, a simple UI interface can monitor real-time printing information, easy to operate.
Tramming 3d printer New
Irfora 3D Printer, Original ET5X FDM 3D Printer Kit All Full Metal Frame 3.5 Inch Color Touchscreen Support Auto Leveling Resume Printing Filament Run Out Detection 300 * 300 * 400mm Build Volume
  • Pre-assembled 3D printer, modular installation, can be installed and used in only 10 minutes, saving time and effort. Enclosed metal unibody design enables a more stable and reliable structure with compact size.
  • With automatic leveling function, get rid of the trouble of manual leveling; At the same time, you can also level it manually to experience DIY hands-on fun.
  • Support filament run out detection, timely remind filament shortage or cut-off filament. Automatic load and unload the filament with just a click. With 3.5 inch color touchscreen for easy operation.
  • Resume printing function, when the power is restored, the printer will continue to print from the interruption point, no worries about unexpected power outages.
  • New industrial grade chipset that allows more accurate, fast and safe print. Protected with safety features like overcurrent protection, overload protection, temperature out of control protection (turn off the heating switch automatically) and other functions.

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Tramming 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Tramming 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Aibecy 3D Printer LCD Resin UV Photocuring 130 * 82 * 160mm Printing Size 2K High Resolution LCD with 3.5 Inch Touchscreen Air Filtration System Off-line Print Original Creality LD-002H
  • 1620*2560 HD resolution with high print precision. 2K HD monochrome screen, the curing time of the model is 1-4s/layer, which speeds up 10% compared with similar printers.
  • Equipped with a UV integrated light source and upgraded transmission system, the light source reaches 8000uw/cm2. Stable light source decides the higher print success rate.
  • The precision z-axis linear rail ensures that every tiny movement of z-axis is accurate under the strict requirements of x-y-axis high precision.
  • Air filtering system with activated carbon, activated carbon can effectively reduce the emission of odor from resin and give you a comfortable environment.
  • Manually leveling system simplifies leveling process. 3.5 inch full color touchscreen, a simple UI interface can monitor real-time printing information, easy to operate.
ELEGOO Mars Pro 3D Printer, MSLA UV Photocuring 3D Printer with Activated Carbon Front USB Port 3.5'' Touch Screen, Matrix UV LED Light Source Off-Line Print Printing Size 115x65x150mm
  • 【What's PRO than Mars? 】BGW15CA Linear guideway with accuracy of 0.02mm, smoother, quieter and more stable. 50w Matrix LED UV light source offer more uniform light emission, curing time lower to 6s per layer. Built-in Activated Carbon Filter, additional cover rubber sealing, no need to worry about the odor of resin
  • 【Convenient and Easy to Use】The build plate has changed to CNC turning CD pattern, which provides stronger adhesion when printing. The improved translucent resin vat is lighter. The USB port has changed to front from back, it is more convenient to plug the flash drive. Mars Pro also refactored user interface with dark background and simulant icons
  • 【Add Air Filter System】Mars Pro add a rubber sealing to the upper cover to prevent the resin odor from out of the cover. The built-in activated carbon filter can absorb and eliminate odor, so there is no need to worry about resin odor during printing
  • 【Better Printing Quality】Thanks to the upgraded Matrix 28 50W UV LED light source,the uniformity of light is increased to 95%. It means more accurate print size, layer exposure time is also reduced to 6 seconds. Mars 2 support .ctb format, smaller files but greatly increase the success rate of printing of bigger models
  • 【MSLA Technology】Digital mask controls which regions of the print area are illuminated by a panel light source array. This allows every object on the built plate to be photocured simultaneously. It means an ELEGOO Mars Pro printer can print 2 and more models as quickly as one. Mars Pro MSLA printer are much faster than SLA or DLP printers
ANYCUBIC Photon Zero 3D Printer, LCD Resin 3D Printer Assembled with 16X Anti-aliasing Function and UV Cooling System & Upgraded UV Module, Build Size 3.81"x2.12"x5.9", Black
  • EXCELLENT ACCURACY:Photon zero uses parallel LEDs and 16 times the anti-aliasing function to ensure that your print output has smoother details than conventional resin printers and FDM printers
  • UV COOLING SYSTEM: ANYCUBIC 3D printer photon zero equipped with the cooling system to stabilize the printing performance and to extend the life of the 3D resin printer
  • HUMANIZED DESIGN: Photon zero with markings in the resin tub and the integrated FEP film, you can easily see your amount of resin and replace the consumable FEP
  • SELF-DEVELOPED SLICING SOFTWARE:Photon workshop only takes 1 minute to cut 30MB. Supports hollowing out, filling, punching and cutting of models. Save a lot of resin. Meet custom requirements and provide better technical support
  • ENTRY-LEVEL RESIN PRINTER: The printing process can be started within 5 minutes of being placed on the build platform and the resin container. first choice for getting started with 3D resin printing,brand new UI interface, high resolution display, smooth operation
DISCOUNT
TENLOG Hands 2 Independent Dual Extruder 3D Printer,300 Degree High Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS,220x220x250mm
  • 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
  • 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
  • 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
  • 【Warranty and Assemble】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Tramming 3d printer actually costs.

Latest Tramming 3d printer
Creality 3D Upgraded Version BL-Touch Heated Bed Auto Bed Leveling Sensor Kit For Ender-3 / Ender-3s / Ender-3 Pro/CR-10 3D Printer
  • Upgraded Version -This is the upgraded version of the original upgraded kit provided by Creality 3D which can be used for Creality V1/ V2 / V4.2.2 / V 4.2.7 mainboard. It include but not limited to the following 3d printer: Ender-3 / Ender-3s / Ender-3 Pro / CR-10/ CR-20 Pro/ CR-10S/ CR-10S4/ CR-10S 5
  • Genuine BLTouch - Each of our Genuine BL Touch has a QR code on PCB.
  • Simple - BLTouch can be easily applied, since it has a small and simple structure. As BLTouch works as usual auto bed leveling sensor, Gathering information & setting up your firmware will be an easy task.
  • Smart - Self-test and alarm.The push pin operate two times in a test when the power is on.The LED light blinks if a problem was found on a self-test or during operation
  • High-precision - BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
Latest Tramming 3d printer
Go Inks 500g (0.5kg) Orange 1.75mm ABS 3D Printer Filament Spool
  • Filament to be used with your 3D printing device from Go Inks
  • Contains: 1 spool of filament
  • Weight: 500g/ 0.5kg
  • Vacuum packed
  • Type and size: abs/ 1.75mm
Latest Tramming 3d printer
ANYCUBIC 3D Printer Resin LCD UV 405nm Rapid Photopolymer for LCD/DLP/SLA 3D Printers, 1000g Black
  • 【Works Well on Most 3D Printers】Giving the outstanding performances, ANYCUBIC 3d printer standard resin is suitable for most DLP or LCD 3D printers, such as ANYCUBIC PHOTON / PHOTON S, MONO, MONO X, ELEGOO Mars, Mars Pro, Proxima, LD002R, etc.
  • 【Easy to Clean】Removing 3d printing model under hot water or isopropanol is just effortless. The remaining 3d printer resin can be easily removed with isopropanol.
  • 【Great Quality】ANYCUBIC 3d photopolymer resin contains methacrylate monomers to reduce volume shrinkage during the Photocuring process, which ensures the high precision of the print model with a smooth finish. Recommended printing parameters: Bottom Exposure: ~60s; Normal Exposure: ~8s
  • 【Nice Colors】ANYCUBIC 3D printer resin with high-quality pigments and photo-initiators, the models printed with resin have a very pure and stunning color effect just like an artwork.
  • 【Safe and Secure Packaging】Leak-proof bottle fully wrapped with a plastic bubble bag and exquisitely designed package box make sure the 3d 405nm UV resin stays in place where they belong.
DISCOUNTLatest Tramming 3d printer
Creality Ender 5 Pro 3D Printer with Silent Mainboard Pre-installed,Capricorn Tube, Metal Exruder,220 * 220 * 300mm Build Volume, Removable Platform, Dual Y-Axis, Modular Design
  • Three Upgraded Based on Ender 5 - V1.1.5 Silent Motherboard pre-installed,allowing for quieter and more precise printing performance. Durable Metal Extruder provides strongers pressure while pushing filament through the nozzoles which will bolster the overall printig performance.Capricorn Premium PTFE Tube makes the Creality Ender 5 pro 3d printer better suited to print with flexible filaments and other exotic materials.
  • Stable Cubic Structure: Creality Ender 5 pro desktop 3d printer has a stable box-like frame and an increased Z-axis reach. It's not only allows for taller prints based on Ender 3 series printer, the more sturdy and steady frame improves precision for both small and big prints.
  • Resume Printing Function: Ender 5 Pro is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • More stability performance: Equipped with dual Y axis motors and down-shift Z axis, moving more smoothly, fewer points of failure and fewer headaches.
  • Beginner Friendly - Ender 5 Pro comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic construction of 3D printer.Even if you are a beginner,there is nothing to worried about.
Latest Tramming 3d printer
Latest Tramming 3d printer
Comgrow Creality 3D Ender 3 Pro 3D Printer with Cmagnet Build Plateform Surface 220x220x250mm Print Size
  • Upgrade Version: This is the upgrade version of Creality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size.
  • Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
  • Improved Mechanical Properties:The Ender 3 Pro has been redesigned with a more sturdy, 40×40 aluminum extrusion for the Y-axis base. This should improve the overall stability of the printing surface.
    Semi-assembled Kit: several assembled parts This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
  • WHAT CAN WE DO: As an authorised reseller of Creality 3D, we can offer 100% original products for you. And also can offer you professional customer service.
Latest Tramming 3d printer
Comgrow Creality Ender-3 3D Printer Aluminum DIY with Resume Print 220x220x250mm Print Size
  • E Axis working: The E axis motor will start work when the nozzle temperature reaches over 185℃, then before starting printing, please remember to heat the nozzle temperature first.
  • Easy and quick assembly: It is assembled with a few parts, 20 screws can be assembled in just 2 hours.
  • Extrusion reduces the risk of clogging and poor displacement; V-shape with POM wheels make moving noiseless, smooth and constant.
  • Strict test: 24 hours for key components before delivery and real-time technical support. Secure power supply guaranteed. Culture medium reaches 110 ℃ in just 5 minutes.
  • Note: As an authorized manufacturer, we, Comgrow, offer you 100% Creality 3 printers as well as technical support.
Latest Tramming 3d printer
ELEGOO Mars Pro MSLA 3D Printer UV Photocuring LCD 3D Printer with Matrix UV LED Light Source, Built-In Activated Carbon,Off-Line Print 4.53in(L) x 2.56in(W) x 5.9in(H) Printing Size
  • 【Higher Precision and Excellent Performance】Z axis utilizes linear guideway structure, which achieves steadier motion and greatly enhanced moving accuracy to reduce the layer lines on the 3D printed model and make the surface much smoother. The set screws of the build plate are now upgraded to larger anti-slip hexagon socket screws, which have a more stable leveling result. CNC turning CD pattern on the build plate provides a much stronger adherence, especially when printing large 3D models.
  • 【No Irritative Odor Experience】Mars Pro comes with a silicone rubber seal that can be put on the cover to prevent the resin odor from leaking. Built-in activated carbon can absorb and filter the resin odor before they are ventilated throughout the cooling fan, which gives you a fresh and safe user experience.
  • 【Light and Convenient 】Remodeled resin vat made of aluminum alloy is light yet sturdy. The USB port is relocated to the front for your convenience. Mars Pro uses a new user interface with a dark theme and simple design.
  • 【Qulity Prints and Consistent Success】Matrix light source consists of 28 50Watt UV LED lights that have uniform light emission, ensuring superior printing results, a more accurate printing size, and saves your time by 25% in layer exposure time. Mars Pro is the first resin-based 3D printer to use the sliced file of .ctb format, which reduces the file size by an average of 90% compared to .cbddlp format and significantly increases the printing success rate when printing bigger models.
  • 【Warranty and Privilege 】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded). Parts and replacements will be shipped from the overseas warehouse to offer you quality and fast customer service. Mars Pro also comes with a Myminifactory Membership Card, which gives you a privilege to millions of curated 3D objects to start your first printing on Mars Pro.
Latest Tramming 3d printer
ELEGOO Mars 2 Mono MSLA 3D Printer UV Photocuring LCD Resin 3D Printer with 6.08 inch 2K Monochrome LCD, Printing Size 129 * 80 * 150mm / 5.08 * 3.15 * 5.90inch
  • 【Fast Printing and less maintenance】Mars 2 comes with a 6.08 inch monochrome LCD of 2K HD resolution and only takes 2 seconds per layer exposure to cure resin, which could significantly enhance your printing efficiency. Mono LCD has a much longer lifespan and stable performance during long term printing, thus saves your cost.
  • 【Outstanding prints and ultra accurcy】Brand new light source structure provides more even UV light emission and working together with 2K mono LCD, the printing details and precision are greatly improved and the 3D printed models are fascinating.
  • 【Sturdy build quality】CNC machined aluminum body makes Mars 2 a very formidable machine. Newly-designed sandblasted build plate has a much stronger adherence during printing and enables consistent printing success. Built-in active carbon could absorb the fume of resin and offer you a refreshing printing experience.
  • 【Multi language interface】Mars 2 now supports 12 kinds of languages so customers across the world could operate the 3D printer more conveniently without barries.The newly added 10 languages are Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish and Portuguese.
  • 【Warranty and Service】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded).

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Tramming 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Tramming 3d printer which are among the cheapest on the market. Just scroll through the list to find Tramming 3d printer the cheapest products.

Catalog

The product Tramming 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.

Tramming 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Tramming 3d printer New
ZHITING 2 Pack 3D Printer Heat Bed Power Module 3D Printer Board Expansion Board MOS Tube High Current Load Module
  • A general add-on heated bed power expansion module for 3D printer
  • Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8
  • With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A
  • Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.)
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board, According to the thermal power of the bed, please choose the appropriate power supply, with sufficient margin. If it is large power heated, we suggest 24V power supply, under the same power requirements, current is less than 12 v
Tramming 3d printer New
BIGTREETECH MMU2 DIP Filament PLA Select filament consumable port 5 colors Support TMC2209/TMC5160 Apply to prusa i3 MK3S/MK2.5S 3D Printer
  • 1. Firmware link: https://github.com/bigtreetech.
  • 2. Master chip:STM32F030C8T6.
  • 3. Used to select consumables port, Support up to 5 color printing and multiple driver models.
  • 4. Driver modes: TMC Driver-UART Mode / Driver-SPI Mode.
  • 5. 24-hour service: Don't worry about after-sales problems, please contact us if necessary, we will solve it for you.
Tramming 3d printer New
Eono by Amazon 3D Printer PLA Filament, Tangle-Free with 0.03 mm Dimensional Accuracy, 1.75 mm, 1 kg Spool, Grey
  • Neat Spooling and Tangle-Free: Premium 1.75 mm 3D filament uses layer-by-layer technology to ensure perfect spooling and neat winding; this reduces the chance of failed prints so you can tackle longer prints with ease.
  • Non-Toxic and Environmentally Friendly: Made from natural, renewable materials; non-toxic, environmentally friendly and 100% biodegradable; harm-free for the environment and the user; recommended extrusion temperature at nozzle: 190-230 °C; recommended build platform temperature: 20-70 °C.
  • High-Performance for Quality Prints: This tangle-free filament has consistent diameter and shape for less stringing and warping, minimal shrinkage, and strong layer adhesion; fewer jams and failures for smooth, continuous printing and a smoother finish.
  • Wide Compatibility with FDM 3D Printers and 3D Pens: Use with a wide variety of FDM 3D printers and 3D pens that use 1.75 mm filament including ANYCUBIC, AirWolf, Aleph Objects, BCN3D, Beeverycreative, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, etc.
  • Premium Packaging and After-Sale Service: Delivered vacuum-sealed with desiccant to ensure optimal condition on arrival, free from dust and dirt; we provide 24-hour customer service to ensure your satisfaction.
Tramming 3d printer New
ANYCUBIC Photon Zero 3D Printer, LCD Resin 3D Printer Assembled with 16X Anti-aliasing Function and UV Cooling System & Upgraded UV Module, Build Size 3.81"x2.12"x5.9", Black
  • EXCELLENT ACCURACY:Photon zero uses parallel LEDs and 16 times the anti-aliasing function to ensure that your print output has smoother details than conventional resin printers and FDM printers
  • UV COOLING SYSTEM: ANYCUBIC 3D printer photon zero equipped with the cooling system to stabilize the printing performance and to extend the life of the 3D resin printer
  • HUMANIZED DESIGN: Photon zero with markings in the resin tub and the integrated FEP film, you can easily see your amount of resin and replace the consumable FEP
  • SELF-DEVELOPED SLICING SOFTWARE:Photon workshop only takes 1 minute to cut 30MB. Supports hollowing out, filling, punching and cutting of models. Save a lot of resin. Meet custom requirements and provide better technical support
  • ENTRY-LEVEL RESIN PRINTER: The printing process can be started within 5 minutes of being placed on the build platform and the resin container. first choice for getting started with 3D resin printing,brand new UI interface, high resolution display, smooth operation
Tramming 3d printer New
ELEGOO Mars Pro 3D Printer, MSLA UV Photocuring 3D Printer with Activated Carbon Front USB Port 3.5'' Touch Screen, Matrix UV LED Light Source Off-Line Print Printing Size 115x65x150mm
  • 【What's PRO than Mars? 】BGW15CA Linear guideway with accuracy of 0.02mm, smoother, quieter and more stable. 50w Matrix LED UV light source offer more uniform light emission, curing time lower to 6s per layer. Built-in Activated Carbon Filter, additional cover rubber sealing, no need to worry about the odor of resin
  • 【Convenient and Easy to Use】The build plate has changed to CNC turning CD pattern, which provides stronger adhesion when printing. The improved translucent resin vat is lighter. The USB port has changed to front from back, it is more convenient to plug the flash drive. Mars Pro also refactored user interface with dark background and simulant icons
  • 【Add Air Filter System】Mars Pro add a rubber sealing to the upper cover to prevent the resin odor from out of the cover. The built-in activated carbon filter can absorb and eliminate odor, so there is no need to worry about resin odor during printing
  • 【Better Printing Quality】Thanks to the upgraded Matrix 28 50W UV LED light source,the uniformity of light is increased to 95%. It means more accurate print size, layer exposure time is also reduced to 6 seconds. Mars 2 support .ctb format, smaller files but greatly increase the success rate of printing of bigger models
  • 【MSLA Technology】Digital mask controls which regions of the print area are illuminated by a panel light source array. This allows every object on the built plate to be photocured simultaneously. It means an ELEGOO Mars Pro printer can print 2 and more models as quickly as one. Mars Pro MSLA printer are much faster than SLA or DLP printers
Tramming 3d printer New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
DISCOUNTTramming 3d printer New
TENLOG Hands 2 Independent Dual Extruder 3D Printer,300 Degree High Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS,220x220x250mm
  • 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
  • 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
  • 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
  • 【Warranty and Assemble】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
Tramming 3d printer New
Aibecy 3D Printer LCD Resin UV Photocuring 130 * 82 * 160mm Printing Size 2K High Resolution LCD with 3.5 Inch Touchscreen Air Filtration System Off-line Print Original Creality LD-002H
  • 1620*2560 HD resolution with high print precision. 2K HD monochrome screen, the curing time of the model is 1-4s/layer, which speeds up 10% compared with similar printers.
  • Equipped with a UV integrated light source and upgraded transmission system, the light source reaches 8000uw/cm2. Stable light source decides the higher print success rate.
  • The precision z-axis linear rail ensures that every tiny movement of z-axis is accurate under the strict requirements of x-y-axis high precision.
  • Air filtering system with activated carbon, activated carbon can effectively reduce the emission of odor from resin and give you a comfortable environment.
  • Manually leveling system simplifies leveling process. 3.5 inch full color touchscreen, a simple UI interface can monitor real-time printing information, easy to operate.
Tramming 3d printer New
Irfora 3D Printer, Original ET5X FDM 3D Printer Kit All Full Metal Frame 3.5 Inch Color Touchscreen Support Auto Leveling Resume Printing Filament Run Out Detection 300 * 300 * 400mm Build Volume
  • Pre-assembled 3D printer, modular installation, can be installed and used in only 10 minutes, saving time and effort. Enclosed metal unibody design enables a more stable and reliable structure with compact size.
  • With automatic leveling function, get rid of the trouble of manual leveling; At the same time, you can also level it manually to experience DIY hands-on fun.
  • Support filament run out detection, timely remind filament shortage or cut-off filament. Automatic load and unload the filament with just a click. With 3.5 inch color touchscreen for easy operation.
  • Resume printing function, when the power is restored, the printer will continue to print from the interruption point, no worries about unexpected power outages.
  • New industrial grade chipset that allows more accurate, fast and safe print. Protected with safety features like overcurrent protection, overload protection, temperature out of control protection (turn off the heating switch automatically) and other functions.

Where to buy?

If you are asking yourself where to buy Tramming 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Tramming 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Tramming 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Tramming 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Tramming 3d printer used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Tramming 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Aibecy 3D Printer LCD Resin UV Photocuring 130 * 82 * 160mm Printing Size 2K High Resolution LCD with 3.5 Inch Touchscreen Air Filtration System Off-line Print Original Creality LD-002H
  • 1620*2560 HD resolution with high print precision. 2K HD monochrome screen, the curing time of the model is 1-4s/layer, which speeds up 10% compared with similar printers.
  • Equipped with a UV integrated light source and upgraded transmission system, the light source reaches 8000uw/cm2. Stable light source decides the higher print success rate.
  • The precision z-axis linear rail ensures that every tiny movement of z-axis is accurate under the strict requirements of x-y-axis high precision.
  • Air filtering system with activated carbon, activated carbon can effectively reduce the emission of odor from resin and give you a comfortable environment.
  • Manually leveling system simplifies leveling process. 3.5 inch full color touchscreen, a simple UI interface can monitor real-time printing information, easy to operate.
ELEGOO Mars Pro 3D Printer, MSLA UV Photocuring 3D Printer with Activated Carbon Front USB Port 3.5'' Touch Screen, Matrix UV LED Light Source Off-Line Print Printing Size 115x65x150mm
  • 【What's PRO than Mars? 】BGW15CA Linear guideway with accuracy of 0.02mm, smoother, quieter and more stable. 50w Matrix LED UV light source offer more uniform light emission, curing time lower to 6s per layer. Built-in Activated Carbon Filter, additional cover rubber sealing, no need to worry about the odor of resin
  • 【Convenient and Easy to Use】The build plate has changed to CNC turning CD pattern, which provides stronger adhesion when printing. The improved translucent resin vat is lighter. The USB port has changed to front from back, it is more convenient to plug the flash drive. Mars Pro also refactored user interface with dark background and simulant icons
  • 【Add Air Filter System】Mars Pro add a rubber sealing to the upper cover to prevent the resin odor from out of the cover. The built-in activated carbon filter can absorb and eliminate odor, so there is no need to worry about resin odor during printing
  • 【Better Printing Quality】Thanks to the upgraded Matrix 28 50W UV LED light source,the uniformity of light is increased to 95%. It means more accurate print size, layer exposure time is also reduced to 6 seconds. Mars 2 support .ctb format, smaller files but greatly increase the success rate of printing of bigger models
  • 【MSLA Technology】Digital mask controls which regions of the print area are illuminated by a panel light source array. This allows every object on the built plate to be photocured simultaneously. It means an ELEGOO Mars Pro printer can print 2 and more models as quickly as one. Mars Pro MSLA printer are much faster than SLA or DLP printers
ANYCUBIC Photon Zero 3D Printer, LCD Resin 3D Printer Assembled with 16X Anti-aliasing Function and UV Cooling System & Upgraded UV Module, Build Size 3.81"x2.12"x5.9", Black
  • EXCELLENT ACCURACY:Photon zero uses parallel LEDs and 16 times the anti-aliasing function to ensure that your print output has smoother details than conventional resin printers and FDM printers
  • UV COOLING SYSTEM: ANYCUBIC 3D printer photon zero equipped with the cooling system to stabilize the printing performance and to extend the life of the 3D resin printer
  • HUMANIZED DESIGN: Photon zero with markings in the resin tub and the integrated FEP film, you can easily see your amount of resin and replace the consumable FEP
  • SELF-DEVELOPED SLICING SOFTWARE:Photon workshop only takes 1 minute to cut 30MB. Supports hollowing out, filling, punching and cutting of models. Save a lot of resin. Meet custom requirements and provide better technical support
  • ENTRY-LEVEL RESIN PRINTER: The printing process can be started within 5 minutes of being placed on the build platform and the resin container. first choice for getting started with 3D resin printing,brand new UI interface, high resolution display, smooth operation
DISCOUNT
TENLOG Hands 2 Independent Dual Extruder 3D Printer,300 Degree High Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS,220x220x250mm
  • 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
  • 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
  • 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
  • 【Warranty and Assemble】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Tramming 3d printer.

Rating: 3.54 of 5 - 24 votes
1 Star2 Stars3 Stars4 Stars5 Stars (24 votes, average: 3.54 out of 5)
Loading...