Sunlu 3d printer filament pla plus Reviews and Best Deals

Find online Product Reviews, Ranks and Prices for Sunlu 3d printer filament pla plus. Shop Sunlu 3d printer filament pla plus directly from the 2021 Top Online Stores like Amazon, eBay and Aliexpress. Don't miss out on the top promotions for Sunlu 3d printer filament pla plus, buy Sunlu 3d printer filament pla plus directly online and enjoy big saving on your purchases.

Latest Sunlu 3d printer filament pla plus
SUNLU 3D Printer Filament PLA Plus, 1.75mm PLA Filament, 3D Printing Filament Low Odor, Dimensional Accuracy +/- 0.02 mm, 2.2 LBS (1KG) Spool 3D Filament, Red PLA+
  • 【Toughness plus = SUNLU PLA plus, Say No to Brittle 】SUNLU PLA plus no as brittle as normal PLA. Better toughness, brighter color, higher strength;lower shrinkage, lower warping; SUNLU PLA plus filament more easier to print, and odorless, making good print results.
  • 【1.75mm 1KG Pack Vacuum Pack PLA + Filament】 1kg spool 1.75mm filament PLA in vacuum packing. SUNLU 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
  • 【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged.
  • 【High Precision +/- 0.02mm Tolerance】: 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
Latest Sunlu 3d printer filament pla plus
SUNLU 3D Printer Filament PLA Plus, 1.75mm PLA Filament, 3D Printing Filament Low Odor, Dimensional Accuracy +/- 0.02 mm, 2.2 LBS (1KG) Spool 3D Filament, Candy Dandy Pink PLA+
  • 【1.75mm Vacuum Pack Shiny Silk PLA + Filament】 1kg spool 1.75mm filament PLA in vacuum packing. 100% Enviromental Material, made of corn straw, the silk pla is degradable, also a universal 3D printer filament, compatible with most of the printers in the market.
  • 【Tangle Free& No clogging 】 Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged,easy to print.
  • 【Toughness+ = SUNLU PLA+, Say No To Brittle 】Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen).
  • 【High Precision +/- 0.02mm Tolerance】 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【100% Satisfaction Guarantee】 Premium quality guarantee and friendly customer service. We will offer you solution within 24 hours, full refund or return for the problem product, No Risk Purchase & 100% Satisfaction Guarantee.
Latest Sunlu 3d printer filament pla plus
PLA+ 3D Printer Filament 1.75mm, SUNLU PLA Filament PRO, 1.75 PLA Plus Filament, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, Pack of 2, Black+Black
  • Spool Diameter Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers.
  • 1.75mm Diameter Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
  • Recommend Settings We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 70°C - 80°C (158°F - 176°F).
  • Professional Team SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D printing filament, 3D printer, 3D pen and 3D resin. SUNLU has a professional team.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
DISCOUNTLatest Sunlu 3d printer filament pla plus
SUNLU PLA+ Filament 1.75mm for 3D Printer & 3D Pens, 1KG (2.2LBS) PLA+ 3D Printer Filament Tolerance Accuracy +/- 0.02 mm, Black
  • 【Super Performance】Compared with ordinary PLA, SUNLU PLA+ has higher strength and stiffness, and 10*Times tougher than PLA filament
  • 【Advanced Production】SUNLU filament has the lowest tolerance value in the entire 3D printing filament industry, amazingly reached 1.75mm +/- 0.02mm.
  • 【Smooth And Delicate】PLA+ has better toughness, and the printed material is very smooth, and the texture after printing is more delicate.
  • 【More Details】SUNLU PLA+ Filaments are Vacuum packed, neatly arranged to prevent entanglement, 100% no bubbles.
  • 【Life-time Guarantee】24-hour professional after-sales consultation to provide you with meticulous care and best solutions.
Latest Sunlu 3d printer filament pla plus
PLA+ 3D Printer Filament 1.75mm, SUNLU PLA Filament PRO, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, 1.75 PLA PLUS, Grey
  • 【PLA+ Advantages】 PLA+ filament is stronger than PLA, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion.
  • 【Spool Diameter】 Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers.
  • 【1.75mm Diameter】 Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
  • 【Recommend Settings】 We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 70°C - 80°C (158°F - 176°F).
  • 【Professional Team】 SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D printing filament, 3D printer, 3D pen and 3D resin. SUNLU has a professional team.
Latest Sunlu 3d printer filament pla plus
Silk PLA+ Filament 1.75mm, SUNLU Shiny PLA Pro 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 1kg Spool(2.2lbs), Silky 1.75 PLA Plus,Bronze
  • 【Shiny Silk PLA+】SUNLU silk PLA plus 3D printing filament is very easy to use, no Clog/Bubble/Tangle/Warping/Stringing, very shiny surface results, good layer adhesion.
  • 【1.75mm Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
  • 【1KG Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers.
  • 【Recommend Settings】We recommend printing the silk PLA+ filament at a Nozzle temperature of 210°C - 225°C (410°F - 437°F) and Bed temperature of 60°C - 80°C (140°F - 176°F).
  • 【Professional Team】SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D printing filament, 3D printer, 3D pen and 3D resin. SUNLU has a professional team.
DISCOUNTLatest Sunlu 3d printer filament pla plus
SUNLU PLA+ Filament 1.75mm Silk Rainbow Multicolor for FDM 3D Printer, 1KG/Spool PLA Plus Shiny Silk Rainbow
  • 【Highlight Shiny Silk Color Change Rainbow PLA+】Nice shiny special rainbow multi color Gradient. Around Each 13 - 15 Meters to Change Color. No polishing needed, you can print multi beautiful different colors in one spool filament, silk glossy smooth appearance, perfect for arts, crafts, DIY, many different 3D print projects, printing at a high detail results in a beautiful finish
  • 【Popular Silk Shinning Colors】: Smooth&Silk-Like Feel - silky shinny surface with silk luster, giving smooth, pearly and unique touch. The finished 3D printed Items with beautiful silk shiny performance. no polishing needed, printing at a high detail results in a beautiful finish. SUNLU silk PLA+ filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result!
  • 【1.75mm High Precision +/- 0.02mm Tolerance】: 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged. Recommened nozzle temp print temp.: 200-230℃, platform temp 60-80℃(glue is required if you want better print effect).
  • 【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
DISCOUNTLatest Sunlu 3d printer filament pla plus
Latest Sunlu 3d printer filament pla plus
PLA+ 3D Printer Filament 1.75mm, SUNLU PLA Filament PRO, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, 1.75 PLA Plus, Blue
  • 【PLA+ Advantages】 PLA+ filament is stronger than PLA, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion.
  • 【Spool Diameter】 Spool Diameter: 8.00\", Spool Width: 2.50\", Spool Hub Hole Diameter: 2.20\". The size of the SUNLU filament spool is suitable for hanging on many 3D printers.
  • 【1.75mm Diameter】 Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
  • 【Recommend Settings】 We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 70°C - 80°C (158°F - 176°F).
Latest Sunlu 3d printer filament pla plus
SUNLU Silky Shiny 3D Printing Filament Pla For 3D Printer And 3D Pen Silver
  • Precision accuracy +/- 0.02 mm
  • 1kg coil
  • silver / black

Overview


Reviews 2021

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Sunlu 3d printer filament pla plus. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Sunlu 3d printer filament pla plus give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

DISCOUNTBest
SUNLU PLA+ Filament 1.75mm for 3D Printer & 3D Pens, 1KG (2.2LBS) PLA+ 3D Printer Filament Tolerance Accuracy +/- 0.02 mm, Black
  • 【Super Performance】Compared with ordinary PLA, SUNLU PLA+ has higher strength and stiffness, and 10*Times tougher than PLA filament
  • 【Advanced Production】SUNLU filament has the lowest tolerance value in the entire 3D printing filament industry, amazingly reached 1.75mm +/- 0.02mm.
  • 【Smooth And Delicate】PLA+ has better toughness, and the printed material is very smooth, and the texture after printing is more delicate.
  • 【More Details】SUNLU PLA+ Filaments are Vacuum packed, neatly arranged to prevent entanglement, 100% no bubbles.
  • 【Life-time Guarantee】24-hour professional after-sales consultation to provide you with meticulous care and best solutions.
DISCOUNTBest
SUNLU 3D Printer Filament PLA Plus Grass Green, PLA Plus Filament 1.75 mm,Low Odor Dimensional Accuracy +/- 0.02 mm, 3D Printing Filament,2.2 LBS (1KG) Spool for 3D Printers & 3D Pens,Grass Green
  • 【Toughness plus = SUNLU PLA plus, Say No to Brittle 】SUNLU PLA plus no as brittle as normal PLA. Better toughness, brighter color, higher strength;lower shrinkage, lower warping; SUNLU PLA plus filament more easier to print, and odorless, making good print results.
  • 【1.75mm 1KG Pack Vacuum Pack PLA + Filament】 1kg spool 1.75mm filament PLA in vacuum packing. SUNLU 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
  • 【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged.
  • 【High Precision +/- 0.02mm Tolerance】: 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
Best
SUNLU 3D filament 1.75, PLA+ Filament 1.75mm, 3KG PLA+ Filament 0.02mm for 3D Printer 3D Pens, BlueGrey + GrassGreen + Silver
  • 【1.75mm 3KG Pack Vacuum Pack PLA + Filament】 3kg spool 1.75mm filament PLA in vacuum packing. SUNLU 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
  • 【Tangle Free& No Plugging】 Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged.
  • 【Toughness+ = SUNLU PLA+, Say No To Brittle 】Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen).
  • 【High Precision +/- 0.02mm Tolerance】: 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 3KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【100% Enviromental Material】: Environmental protection, Made from starch raw materials derived from renewable plant resources.
Best
SUNLU WOOD 3D Printer Filament 1.75mm PLA Filament 1kg/Spool for 3D Printing, Dimensional Accuracy +/- 0.02 mm, Real Wood filament
  • 【SUNLU 20% WOOD Fibers】-- SUNLU Upgrade Spool Wood Filament is mixture of 20% recycle wood with polymer,Gives wooden colored and texture. SUNLU 1kg Wood filament combines real wood fibers,Extrusion temperature adjustments will show changes in printing color.
  • 【SUNLU WOOD Filament Clog-free & Bubble-Free】-- Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience. Complete drying for 24 hours before vacuum aluminum foil packaging, which can effectively protect the Wood filament from moisture. Please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result.
  • 【SUNLU 1kg WOOD 1.75mm Less- tangle and Easy to Use】-- Full mechanical winding and strict manual examination, which guarantee the WOOD filaments tidy and easy to be fed; Larger spool inner diameter design makes feeding smoother.
  • 【SUNLU WOOD 3D Filament Dimensional Accuracy & Consistency】-- SUNLU 3D filament guarantee these WOOD filaments of 1.75mm diameter, dimensional accuracy +/- 0.02mm; 1kg (2.2lbs)/spool.
  • 【SUNLU 100% SATISFACTION GUARANTEE】 We offer great 3D printer filament and best customer service, Customers enjoy SUNLU 90 days Money Back Guarantee.If SUNLU 3D Printer filament 1.75mm have any problem, please send email to us.
Best
SUNLU 3D Filament, 3D Printer Filament New 3D Filament of PETG, 1.75mm, 0.02 mm, 1KG Black SPLA
  • 【Printed under PETG Setting】This is new PETG filament,called SPLA,but not like normal PLA.Please printed under PETG Filament Setting.
  • 【SUNLU New PETG(SPLA) Print Suggestion】Recommended Extrusion/Nozzle Temperature: 230°C ±10℃
  • Bed Temperature: 80 - 110°C
  • Print Speed: 40 - 50mm/s

On this product review you can find the list of the best Sunlu 3d printer filament pla plus including the technical product sheet, reviews issued by real buyes who have already purchased the products. You can also find info on the prices, active promotions and deals in the United Kingdom (UK).

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Sunlu 3d printer filament pla plus

Here is the ranking of the best Sunlu 3d printer filament pla plus, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Sunlu 3d printer filament pla plus and read the reviews left by real customers, see the Sunlu 3d printer filament pla plus ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

DISCOUNTSunlu 3d printer filament pla plus New
Sunlu 3d printer filament pla plus New
SUNLU PLA Plus 3D Filament 1.75mm for 3D Printer & 3D Pens, 1KG (2.2LBS) PLA+ Filament Tolerance Accuracy +/- 0.02 mm, Bluegrey
  • 【Super Performance】Compared with ordinary PLA, SUNLU PLA+ has higher strength and stiffness, and 10*Times tougher than PLA filament
  • 【Advanced Production】SUNLU filament has the lowest tolerance value in the entire 3D printing filament industry, amazingly reached 1.75mm +/- 0.02mm.
  • 【Smooth And Delicate】PLA+ has better toughness, and the printed material is very smooth, and the texture after printing is more delicate.
  • 【More Details】SUNLU PLA+ Filaments are Vacuum packed, neatly arranged to prevent entanglement, 100% no bubbles.
  • 【Life-time Guarantee】24-hour professional after-sales consultation to provide you with meticulous care and best solutions.
Sunlu 3d printer filament pla plus New
SUNLU 3D Filament, 3D Printer Filament New 3D Filament of PETG, 1.75mm, 0.02 mm, 1KG Black SPLA
  • 【Printed under PETG Setting】This is new PETG filament,called SPLA,but not like normal PLA.Please printed under PETG Filament Setting.
  • 【SUNLU New PETG(SPLA) Print Suggestion】Recommended Extrusion/Nozzle Temperature: 230°C ±10℃
  • Bed Temperature: 80 - 110°C
  • Print Speed: 40 - 50mm/s
Sunlu 3d printer filament pla plus New
SUNLU PLA+ Filament 1.75mm, PLA 3D Filament Tolerance Accuracy +/- 0.02 mm, White
  • Spool Diameter Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers.
  • 1.75mm Diameter Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
  • Recommend Settings We recommend printing at a Nozzle/Extrusion temperature of 210C - 235C (410F - 455F) and Bed/Platform temperature of 70C - 80C (158F - 176F).
  • Professional Team SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D printing filament, 3D printer, 3D pen and 3D resin. SUNLU has a professional team.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Sunlu 3d printer filament pla plus New
PLA+ 3D Printer Filament 1.75mm, SUNLU PLA Filament PRO, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, 1.75 PLA Plus Red
  • ??Spool Diameter?? Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers.
  • ??1.75mm Diameter?? Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
  • ??Recommend Settings?? We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 70°C - 80°C (158°F - 176°F).
  • ??Professional Team?? SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D printing filament, 3D printer, 3D pen and 3D resin. SUNLU has a professional team.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Sunlu 3d printer filament pla plus New
PLA 3D Printer Filament 1.75mm, SUNLU PLA Filament, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, PLA 1.75 Red
  • ??1KG Spool | SUNLU PLA Filament Black?PLA 3D Printer Filament 1.75mm, dimensional accuracy +/- 0.02mm, 1KG (2.2LBS). PLA filament has minimal shrinkage and warping.
  • ??No Harm | 100% Enverionment Friendly? SUNLU PLA filament made from natural renewable resource, 1.75mm PLA filament is 100% biodegradable & non-toxic. No harm to user and environment.
  • ??Printed Temps 215-230°c. | Print Bed (optional): 60-70°c.?SUNLU PLA filament 1.75mm are considered as one of the most commonly used filaments for both beginners and experienced users.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Sunlu 3d printer filament pla plus New
SUNLU Silky Shiny 3D Printing Filament Pla For 3D Printer And 3D Pen Silver
  • Precision accuracy +/- 0.02 mm
  • 1kg coil
  • silver / black
Sunlu 3d printer filament pla plus New
3D Printer Silk PLA Filament 1.75, SUNLU 2 Colors Silk PLA 1.75mm of MasterSpool, Fit FDM 3D Printer, 1KG Spool, Pack of 2, Dimensional Accuracy +/- 0.02 mm, Silk PLA Black+White
  • 【Disassembly Recycle Reuse MasterSpool Filament】: Compared with normal filament, SUNLU 1.75mm MasterSpool filament can be loaded and unloaded for the repeat usage, low lost and the solution of the waste of disposable reels, environmental.
  • 【1.75MM diameter ±0.02mm】 PLA filament diameter is strictly controlled during the manufacturing process, diameter is 1.75mm, dimensional accuracy is +/- 0.02mm, spool is 1KG.
  • 【Removable Reel with Filament+ Extra 1KG Refill Silk PLA Filament】: One removable reel and 1KG refill filaments make up “1+1” combination. It is economic way to get your new filaments as you can use your masterspool again and again.
  • 【MasterSpool Suitable for Other Spoolless Filament】: Diameter of SUNLU removable MasterSpool is around 80mm while spoolless filament’s is 87mm. Diameter and height of the reel is allowance, which can be reuse for other brand nut filament if diameter is prop.
  • 【12 Months Warranty and Friendly After-sales Service】N.W 2KG Silk PLA Black+White, Welcome guide,12 months warranty, and friendly after-sales service. Let’s buy it now!
Sunlu 3d printer filament pla plus New
SIMAX3D Dryer Box of 3D Printer Filament,PLA+ Storage Box,Keep Filament Dry and Measure Filament Weight,Spool Holder,Filament dispenser compatible with 1.75mm/2.85mm/3.00mm.
  • 【Stay dry at all times】Wet 3D printing filaments can cause problems such as pulling,clogging and poor adhesion.The filament dryer keeps the 3D filament dry during the printing process and provides a dry storage environment for the filament,thus reducing the impact of the objective environment on the print result.
  • 【High compatibility】Maximum Capacity of SIMAX3D Dryer Box is 200*73mm.works perfectly with the diameters 1.75mm/2.85mm/3.00mm PLA+plus,ABS,PETG,TPU,Silk,Marble,Nylon,PA-CF,PVA and other 3D printer filament,especially those moisture sensitive filaments.
  • 【Ergonomic design】 A:Built-in rotating shafts allow the filament to continuously rotate in dryer box,Therefore drying does not affect printing;B:silent design,Less than 10dB during operation,no obnoxious noises;C:Large 2" LCD display with very clear indication of temperature times;D:timer function,You can adjust the time and temperature as you wish.
  • 【Simple but Effective】 Easy to assemble,Simple to operate,just press any button to turn on,press and hold the left button to change the drying time,press the right button to change the temperature setting.adjustable temperature range of 35-55°C (0-24 hours).It may be more helpful if you live in a humid temperature zone.
  • 【After-sales service guarantee】If you have any questions about filament dehydrator box,don't hesitate to contact us.We will provide you with a 30-day unconditional refund and a one-year warranty.

Prices

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Sunlu 3d printer filament pla plus actually costs.

Latest Sunlu 3d printer filament pla plus
SUNLU 3D Printer Filament PLA Plus, 1.75mm PLA Filament, 3D Printing Filament Low Odor, Dimensional Accuracy +/- 0.02 mm, 2.2 LBS (1KG) Spool 3D Filament, Red PLA+
  • 【Toughness plus = SUNLU PLA plus, Say No to Brittle 】SUNLU PLA plus no as brittle as normal PLA. Better toughness, brighter color, higher strength;lower shrinkage, lower warping; SUNLU PLA plus filament more easier to print, and odorless, making good print results.
  • 【1.75mm 1KG Pack Vacuum Pack PLA + Filament】 1kg spool 1.75mm filament PLA in vacuum packing. SUNLU 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
  • 【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged.
  • 【High Precision +/- 0.02mm Tolerance】: 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
Latest Sunlu 3d printer filament pla plus
SUNLU 3D Printer Filament PLA Plus, 1.75mm PLA Filament, 3D Printing Filament Low Odor, Dimensional Accuracy +/- 0.02 mm, 2.2 LBS (1KG) Spool 3D Filament, Candy Dandy Pink PLA+
  • 【1.75mm Vacuum Pack Shiny Silk PLA + Filament】 1kg spool 1.75mm filament PLA in vacuum packing. 100% Enviromental Material, made of corn straw, the silk pla is degradable, also a universal 3D printer filament, compatible with most of the printers in the market.
  • 【Tangle Free& No clogging 】 Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged,easy to print.
  • 【Toughness+ = SUNLU PLA+, Say No To Brittle 】Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen).
  • 【High Precision +/- 0.02mm Tolerance】 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【100% Satisfaction Guarantee】 Premium quality guarantee and friendly customer service. We will offer you solution within 24 hours, full refund or return for the problem product, No Risk Purchase & 100% Satisfaction Guarantee.
Latest Sunlu 3d printer filament pla plus
PLA+ 3D Printer Filament 1.75mm, SUNLU PLA Filament PRO, 1.75 PLA Plus Filament, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, Pack of 2, Black+Black
  • Spool Diameter Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers.
  • 1.75mm Diameter Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
  • Recommend Settings We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 70°C - 80°C (158°F - 176°F).
  • Professional Team SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D printing filament, 3D printer, 3D pen and 3D resin. SUNLU has a professional team.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
DISCOUNTLatest Sunlu 3d printer filament pla plus
SUNLU PLA+ Filament 1.75mm for 3D Printer & 3D Pens, 1KG (2.2LBS) PLA+ 3D Printer Filament Tolerance Accuracy +/- 0.02 mm, Black
  • 【Super Performance】Compared with ordinary PLA, SUNLU PLA+ has higher strength and stiffness, and 10*Times tougher than PLA filament
  • 【Advanced Production】SUNLU filament has the lowest tolerance value in the entire 3D printing filament industry, amazingly reached 1.75mm +/- 0.02mm.
  • 【Smooth And Delicate】PLA+ has better toughness, and the printed material is very smooth, and the texture after printing is more delicate.
  • 【More Details】SUNLU PLA+ Filaments are Vacuum packed, neatly arranged to prevent entanglement, 100% no bubbles.
  • 【Life-time Guarantee】24-hour professional after-sales consultation to provide you with meticulous care and best solutions.
Latest Sunlu 3d printer filament pla plus
PLA+ 3D Printer Filament 1.75mm, SUNLU PLA Filament PRO, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, 1.75 PLA PLUS, Grey
  • 【PLA+ Advantages】 PLA+ filament is stronger than PLA, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion.
  • 【Spool Diameter】 Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers.
  • 【1.75mm Diameter】 Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
  • 【Recommend Settings】 We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 70°C - 80°C (158°F - 176°F).
  • 【Professional Team】 SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D printing filament, 3D printer, 3D pen and 3D resin. SUNLU has a professional team.
Latest Sunlu 3d printer filament pla plus
Silk PLA+ Filament 1.75mm, SUNLU Shiny PLA Pro 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 1kg Spool(2.2lbs), Silky 1.75 PLA Plus,Bronze
  • 【Shiny Silk PLA+】SUNLU silk PLA plus 3D printing filament is very easy to use, no Clog/Bubble/Tangle/Warping/Stringing, very shiny surface results, good layer adhesion.
  • 【1.75mm Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
  • 【1KG Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers.
  • 【Recommend Settings】We recommend printing the silk PLA+ filament at a Nozzle temperature of 210°C - 225°C (410°F - 437°F) and Bed temperature of 60°C - 80°C (140°F - 176°F).
  • 【Professional Team】SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D printing filament, 3D printer, 3D pen and 3D resin. SUNLU has a professional team.
DISCOUNTLatest Sunlu 3d printer filament pla plus
SUNLU PLA+ Filament 1.75mm Silk Rainbow Multicolor for FDM 3D Printer, 1KG/Spool PLA Plus Shiny Silk Rainbow
  • 【Highlight Shiny Silk Color Change Rainbow PLA+】Nice shiny special rainbow multi color Gradient. Around Each 13 - 15 Meters to Change Color. No polishing needed, you can print multi beautiful different colors in one spool filament, silk glossy smooth appearance, perfect for arts, crafts, DIY, many different 3D print projects, printing at a high detail results in a beautiful finish
  • 【Popular Silk Shinning Colors】: Smooth&Silk-Like Feel - silky shinny surface with silk luster, giving smooth, pearly and unique touch. The finished 3D printed Items with beautiful silk shiny performance. no polishing needed, printing at a high detail results in a beautiful finish. SUNLU silk PLA+ filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result!
  • 【1.75mm High Precision +/- 0.02mm Tolerance】: 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged. Recommened nozzle temp print temp.: 200-230℃, platform temp 60-80℃(glue is required if you want better print effect).
  • 【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
DISCOUNTLatest Sunlu 3d printer filament pla plus
Latest Sunlu 3d printer filament pla plus
PLA+ 3D Printer Filament 1.75mm, SUNLU PLA Filament PRO, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, 1.75 PLA Plus, Blue
  • 【PLA+ Advantages】 PLA+ filament is stronger than PLA, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion.
  • 【Spool Diameter】 Spool Diameter: 8.00\", Spool Width: 2.50\", Spool Hub Hole Diameter: 2.20\". The size of the SUNLU filament spool is suitable for hanging on many 3D printers.
  • 【1.75mm Diameter】 Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
  • 【Recommend Settings】 We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 70°C - 80°C (158°F - 176°F).
Latest Sunlu 3d printer filament pla plus
SUNLU Silky Shiny 3D Printing Filament Pla For 3D Printer And 3D Pen Silver
  • Precision accuracy +/- 0.02 mm
  • 1kg coil
  • silver / black

Promotions and Deals (UK) 2021

During the year there are many promotions on products for sale online and Sunlu 3d printer filament pla plus could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Sunlu 3d printer filament pla plus which are among the cheapest on the market. Just scroll through the list to find Sunlu 3d printer filament pla plus the cheapest products.

2021 Catalog

The product Sunlu 3d printer filament pla plus can be found in the dedicated catalog where the entire list of products on sale is presented. Sunlu 3d printer filament pla plus is included in the 2021 catalog presentation along with the family of products belonging to the Brand. The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

DISCOUNTSunlu 3d printer filament pla plus New
Sunlu 3d printer filament pla plus New
SUNLU PLA Plus 3D Filament 1.75mm for 3D Printer & 3D Pens, 1KG (2.2LBS) PLA+ Filament Tolerance Accuracy +/- 0.02 mm, Bluegrey
  • 【Super Performance】Compared with ordinary PLA, SUNLU PLA+ has higher strength and stiffness, and 10*Times tougher than PLA filament
  • 【Advanced Production】SUNLU filament has the lowest tolerance value in the entire 3D printing filament industry, amazingly reached 1.75mm +/- 0.02mm.
  • 【Smooth And Delicate】PLA+ has better toughness, and the printed material is very smooth, and the texture after printing is more delicate.
  • 【More Details】SUNLU PLA+ Filaments are Vacuum packed, neatly arranged to prevent entanglement, 100% no bubbles.
  • 【Life-time Guarantee】24-hour professional after-sales consultation to provide you with meticulous care and best solutions.
Sunlu 3d printer filament pla plus New
SUNLU 3D Filament, 3D Printer Filament New 3D Filament of PETG, 1.75mm, 0.02 mm, 1KG Black SPLA
  • 【Printed under PETG Setting】This is new PETG filament,called SPLA,but not like normal PLA.Please printed under PETG Filament Setting.
  • 【SUNLU New PETG(SPLA) Print Suggestion】Recommended Extrusion/Nozzle Temperature: 230°C ±10℃
  • Bed Temperature: 80 - 110°C
  • Print Speed: 40 - 50mm/s
Sunlu 3d printer filament pla plus New
SUNLU PLA+ Filament 1.75mm, PLA 3D Filament Tolerance Accuracy +/- 0.02 mm, White
  • Spool Diameter Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers.
  • 1.75mm Diameter Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
  • Recommend Settings We recommend printing at a Nozzle/Extrusion temperature of 210C - 235C (410F - 455F) and Bed/Platform temperature of 70C - 80C (158F - 176F).
  • Professional Team SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D printing filament, 3D printer, 3D pen and 3D resin. SUNLU has a professional team.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Sunlu 3d printer filament pla plus New
PLA+ 3D Printer Filament 1.75mm, SUNLU PLA Filament PRO, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, 1.75 PLA Plus Red
  • ??Spool Diameter?? Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers.
  • ??1.75mm Diameter?? Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
  • ??Recommend Settings?? We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 70°C - 80°C (158°F - 176°F).
  • ??Professional Team?? SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D printing filament, 3D printer, 3D pen and 3D resin. SUNLU has a professional team.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Sunlu 3d printer filament pla plus New
PLA 3D Printer Filament 1.75mm, SUNLU PLA Filament, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, PLA 1.75 Red
  • ??1KG Spool | SUNLU PLA Filament Black?PLA 3D Printer Filament 1.75mm, dimensional accuracy +/- 0.02mm, 1KG (2.2LBS). PLA filament has minimal shrinkage and warping.
  • ??No Harm | 100% Enverionment Friendly? SUNLU PLA filament made from natural renewable resource, 1.75mm PLA filament is 100% biodegradable & non-toxic. No harm to user and environment.
  • ??Printed Temps 215-230°c. | Print Bed (optional): 60-70°c.?SUNLU PLA filament 1.75mm are considered as one of the most commonly used filaments for both beginners and experienced users.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Sunlu 3d printer filament pla plus New
SUNLU Silky Shiny 3D Printing Filament Pla For 3D Printer And 3D Pen Silver
  • Precision accuracy +/- 0.02 mm
  • 1kg coil
  • silver / black
Sunlu 3d printer filament pla plus New
3D Printer Silk PLA Filament 1.75, SUNLU 2 Colors Silk PLA 1.75mm of MasterSpool, Fit FDM 3D Printer, 1KG Spool, Pack of 2, Dimensional Accuracy +/- 0.02 mm, Silk PLA Black+White
  • 【Disassembly Recycle Reuse MasterSpool Filament】: Compared with normal filament, SUNLU 1.75mm MasterSpool filament can be loaded and unloaded for the repeat usage, low lost and the solution of the waste of disposable reels, environmental.
  • 【1.75MM diameter ±0.02mm】 PLA filament diameter is strictly controlled during the manufacturing process, diameter is 1.75mm, dimensional accuracy is +/- 0.02mm, spool is 1KG.
  • 【Removable Reel with Filament+ Extra 1KG Refill Silk PLA Filament】: One removable reel and 1KG refill filaments make up “1+1” combination. It is economic way to get your new filaments as you can use your masterspool again and again.
  • 【MasterSpool Suitable for Other Spoolless Filament】: Diameter of SUNLU removable MasterSpool is around 80mm while spoolless filament’s is 87mm. Diameter and height of the reel is allowance, which can be reuse for other brand nut filament if diameter is prop.
  • 【12 Months Warranty and Friendly After-sales Service】N.W 2KG Silk PLA Black+White, Welcome guide,12 months warranty, and friendly after-sales service. Let’s buy it now!
Sunlu 3d printer filament pla plus New
SIMAX3D Dryer Box of 3D Printer Filament,PLA+ Storage Box,Keep Filament Dry and Measure Filament Weight,Spool Holder,Filament dispenser compatible with 1.75mm/2.85mm/3.00mm.
  • 【Stay dry at all times】Wet 3D printing filaments can cause problems such as pulling,clogging and poor adhesion.The filament dryer keeps the 3D filament dry during the printing process and provides a dry storage environment for the filament,thus reducing the impact of the objective environment on the print result.
  • 【High compatibility】Maximum Capacity of SIMAX3D Dryer Box is 200*73mm.works perfectly with the diameters 1.75mm/2.85mm/3.00mm PLA+plus,ABS,PETG,TPU,Silk,Marble,Nylon,PA-CF,PVA and other 3D printer filament,especially those moisture sensitive filaments.
  • 【Ergonomic design】 A:Built-in rotating shafts allow the filament to continuously rotate in dryer box,Therefore drying does not affect printing;B:silent design,Less than 10dB during operation,no obnoxious noises;C:Large 2" LCD display with very clear indication of temperature times;D:timer function,You can adjust the time and temperature as you wish.
  • 【Simple but Effective】 Easy to assemble,Simple to operate,just press any button to turn on,press and hold the left button to change the drying time,press the right button to change the temperature setting.adjustable temperature range of 35-55°C (0-24 hours).It may be more helpful if you live in a humid temperature zone.
  • 【After-sales service guarantee】If you have any questions about filament dehydrator box,don't hesitate to contact us.We will provide you with a 30-day unconditional refund and a one-year warranty.

Where to buy?

If you are asking yourself where to buy Sunlu 3d printer filament pla plus? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Sunlu 3d printer filament pla plus, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Stores In a physical store instead you can try the product with your own hands, you can directly see Sunlu 3d printer filament pla plus and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Sunlu 3d printer filament pla plus may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Sunlu 3d printer filament pla plus used.

Promo Codes 2021

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Sunlu 3d printer filament pla plus at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

SIMAX3D Dryer Box of 3D Printer Filament,PLA+ Storage Box,Keep Filament Dry and Measure Filament Weight,Spool Holder,Filament dispenser compatible with 1.75mm/2.85mm/3.00mm.
  • 【Stay dry at all times】Wet 3D printing filaments can cause problems such as pulling,clogging and poor adhesion.The filament dryer keeps the 3D filament dry during the printing process and provides a dry storage environment for the filament,thus reducing the impact of the objective environment on the print result.
  • 【High compatibility】Maximum Capacity of SIMAX3D Dryer Box is 200*73mm.works perfectly with the diameters 1.75mm/2.85mm/3.00mm PLA+plus,ABS,PETG,TPU,Silk,Marble,Nylon,PA-CF,PVA and other 3D printer filament,especially those moisture sensitive filaments.
  • 【Ergonomic design】 A:Built-in rotating shafts allow the filament to continuously rotate in dryer box,Therefore drying does not affect printing;B:silent design,Less than 10dB during operation,no obnoxious noises;C:Large 2" LCD display with very clear indication of temperature times;D:timer function,You can adjust the time and temperature as you wish.
  • 【Simple but Effective】 Easy to assemble,Simple to operate,just press any button to turn on,press and hold the left button to change the drying time,press the right button to change the temperature setting.adjustable temperature range of 35-55°C (0-24 hours).It may be more helpful if you live in a humid temperature zone.
  • 【After-sales service guarantee】If you have any questions about filament dehydrator box,don't hesitate to contact us.We will provide you with a 30-day unconditional refund and a one-year warranty.
DISCOUNT
SUNLU PLA Plus 3D Filament 1.75mm for 3D Printer & 3D Pens, 1KG (2.2LBS) PLA+ Filament Tolerance Accuracy +/- 0.02 mm, Bluegrey
  • 【Super Performance】Compared with ordinary PLA, SUNLU PLA+ has higher strength and stiffness, and 10*Times tougher than PLA filament
  • 【Advanced Production】SUNLU filament has the lowest tolerance value in the entire 3D printing filament industry, amazingly reached 1.75mm +/- 0.02mm.
  • 【Smooth And Delicate】PLA+ has better toughness, and the printed material is very smooth, and the texture after printing is more delicate.
  • 【More Details】SUNLU PLA+ Filaments are Vacuum packed, neatly arranged to prevent entanglement, 100% no bubbles.
  • 【Life-time Guarantee】24-hour professional after-sales consultation to provide you with meticulous care and best solutions.
PLA 3D Printer Filament 1.75mm, SUNLU PLA Filament, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, PLA 1.75 Red
  • ??1KG Spool | SUNLU PLA Filament Black?PLA 3D Printer Filament 1.75mm, dimensional accuracy +/- 0.02mm, 1KG (2.2LBS). PLA filament has minimal shrinkage and warping.
  • ??No Harm | 100% Enverionment Friendly? SUNLU PLA filament made from natural renewable resource, 1.75mm PLA filament is 100% biodegradable & non-toxic. No harm to user and environment.
  • ??Printed Temps 215-230°c. | Print Bed (optional): 60-70°c.?SUNLU PLA filament 1.75mm are considered as one of the most commonly used filaments for both beginners and experienced users.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
PLA+ 3D Printer Filament 1.75mm, SUNLU PLA Filament PRO, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, 1.75 PLA Plus Red
  • ??Spool Diameter?? Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers.
  • ??1.75mm Diameter?? Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
  • ??Recommend Settings?? We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 70°C - 80°C (158°F - 176°F).
  • ??Professional Team?? SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D printing filament, 3D printer, 3D pen and 3D resin. SUNLU has a professional team.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
SUNLU PLA+ Filament 1.75mm, PLA 3D Filament Tolerance Accuracy +/- 0.02 mm, White
  • Spool Diameter Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers.
  • 1.75mm Diameter Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
  • Recommend Settings We recommend printing at a Nozzle/Extrusion temperature of 210C - 235C (410F - 455F) and Bed/Platform temperature of 70C - 80C (158F - 176F).
  • Professional Team SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D printing filament, 3D printer, 3D pen and 3D resin. SUNLU has a professional team.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
SUNLU 3D Filament, 3D Printer Filament New 3D Filament of PETG, 1.75mm, 0.02 mm, 1KG Black SPLA
  • 【Printed under PETG Setting】This is new PETG filament,called SPLA,but not like normal PLA.Please printed under PETG Filament Setting.
  • 【SUNLU New PETG(SPLA) Print Suggestion】Recommended Extrusion/Nozzle Temperature: 230°C ±10℃
  • Bed Temperature: 80 - 110°C
  • Print Speed: 40 - 50mm/s

Others Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Sunlu 3d printer filament pla plus.

Rating: 3.29 of 5 - 24 votes
1 Star2 Stars3 Stars4 Stars5 Stars (24 votes, average: 3.29 out of 5)
Loading...