Stratasys uprint se plus 3d printer Reviews and Best Deals

Online product reviews and comparisons for Stratasys uprint se plus 3d printer.

DISCOUNTLatest Stratasys uprint se plus 3d printer
Creality Upgraded Ender 5 Plus V2.2.1 Silent Mainboard with TMC2208 Driver, Super Quiet Mute Motherboard for CR-10S/ CR-10 S4/ CR-10 S5/ CR-X/CR-20/ CR-20 PRO 3D Printer
  • Upgraded silent mainboard for creality ender 5 plus printer, just plug it in and you could start printing. If use for CR-10S/ CR-10 S4/ CR-10 S5/ CR-X/CR-20/ CR-20 PRO , please update the firmware first.
  • Super Quiet and Noise Reduction. Use TMC2208 Stepper Motor Drivers, which the key component to eliminate the printer's motor when printing.
  • Notice: This new upgraded silent mainboard does not currently come pre-installed on ender 5 plus.
  • Bootloader pre-installed. The firmware can be modified by Cura with the USB cable.
  • Concern for safety. Thermal runaway protection is enabled, if the temperature rises out of control, the printer will stop heating and halt automatically.
Latest Stratasys uprint se plus 3d printer
Comgrow Creality Ender 3 Pro 3D Printer with Glass Plate, Upgrade Cmagnet Build Surface Plate and UL Certified Meanwell Power Supply Build Volume 220x220x250mm
  • Upgraded Version: It is an upgraded version of Ender 3, comes with extra glass plate, Cmagnet build surface, and also MeanWell power supply. The Ender 3 Pro boasts the same outstanding performance as the Ender 3, upgraded components make this 3D printer more stable, durable and easier to operate.
  • MeanWell Power Supply: Equipped with UL certified MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing.
  • Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • Resume Printing Function: Shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • What You Get: Ceality Ender 3 Pro 3D pinrter, Glass plate, lifetime technical assistance and 24 hours professional customer service.
Latest Stratasys uprint se plus 3d printer
Creality Ender 5 Pro 3D Printer with Silent Mainboard Pre-installed,Capricorn Tube, Metal Exruder,220 * 220 * 300mm Build Volume, Removable Platform, Dual Y-Axis,Modular Design
  • Three Upgraded Based on Ender 5 - V1.1.5 Silent Motherboard pre-installed,allowing for quieter and more precise printing performance. Durable Metal Extruder provides strongers pressure while pushing filament through the nozzoles which will bolster the overall printig performance.Capricorn Premium PTFE Tube makes the Creality Ender 5 pro 3d printer better suited to print with flexible filaments and other exotic materials.
  • Stable Cubic Structure: Creality Ender 5 pro desktop 3d printer has a stable box-like frame and an increased Z-axis reach. It's not only allows for taller prints based on Ender 3 series printer, the more sturdy and steady frame improves precision for both small and big prints.
  • Resume Printing Function: Ender 5 Pro is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • More stability performance: Equipped with dual Y axis motors and down-shift Z axis, moving more smoothly, fewer points of failure and fewer headaches.
  • Beginner Friendly - Ender 5 Pro comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic construction of 3D printer.Even if you are a beginner,there is nothing to worried about.
Latest Stratasys uprint se plus 3d printer
ELEGOO Mars Pro 3D Printer, MSLA UV Photocuring 3D Printer with Activated Carbon Front USB Port 3.5'' Touch Screen, Matrix UV LED Light Source Off-Line Print Printing Size 115x65x150mm
  • 【What's PRO than Mars? 】BGW15CA Linear guideway with accuracy of 0.02mm, smoother, quieter and more stable. 50w Matrix LED UV light source offer more uniform light emission, curing time lower to 6s per layer. Built-in Activated Carbon Filter, additional cover rubber sealing, no need to worry about the odor of resin
  • 【Convenient and Easy to Use】The build plate has changed to CNC turning CD pattern, which provides stronger adhesion when printing. The improved translucent resin vat is lighter. The USB port has changed to front from back, it is more convenient to plug the flash drive. Mars Pro also refactored user interface with dark background and simulant icons
  • 【Add Air Filter System】Mars Pro add a rubber sealing to the upper cover to prevent the resin odor from out of the cover. The built-in activated carbon filter can absorb and eliminate odor, so there is no need to worry about resin odor during printing
  • 【Better Printing Quality】Thanks to the upgraded Matrix 28 50W UV LED light source,the uniformity of light is increased to 95%. It means more accurate print size, layer exposure time is also reduced to 6 seconds. Mars 2 support .ctb format, smaller files but greatly increase the success rate of printing of bigger models
  • 【MSLA Technology】Digital mask controls which regions of the print area are illuminated by a panel light source array. This allows every object on the built plate to be photocured simultaneously. It means an ELEGOO Mars Pro printer can print 2 and more models as quickly as one. Mars Pro MSLA printer are much faster than SLA or DLP printers
Latest Stratasys uprint se plus 3d printer
uPrint Tip Replacement Kit - SE and SE plus
  • Contents: 1 tip for modelling material, 1 tip for support material, 8 tip shields, 4 tip wipe assemblies
Latest Stratasys uprint se plus 3d printer
Creality Ender 3 Pro 3D Printers with Printing Resume Big Volume 220 * 220 * 250mm Flexible Removable Hotbed Building Surface
  • [MeanWell Power Supply] - We adopt the MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • [More Stable] - Redesigned with a much more sturdy, 40x40 aluminum extrusion for the Y-axis base. This provides stability for the printing process, leading to better print quality.
  • [Superior Printing Surface] - A new state of the art “C-MAG” magnetic sticker is designed for Ender 3 Pro, it is entirely removable, flexible and can better adhere to the platform. Once the model is finished printing, remove the magnetic upper from the lower and bend or flex the print surface to watch the model effortlessly pop off the printing surface.
  • [Enriched Accessories] - It must be surprising that more useful accessories included in our package. Extra parts can save you time while you need, also cost-effective.
Latest Stratasys uprint se plus 3d printer
Shintop 5ml Syringe with 18G 1.5'' Blunt Tip Needles for Experiments, Industrial Use (10 Pack)
  • Syringe Measurement Range: 5 ML, Non-Sterile blunt tip needles is not for injection, industrial use only
  • Polypropylene Barrel/Plunger, For measuring and dispensing fluids/chemicals, lab use and experiments
  • Also great for essential oil, science lab, flat back rhinestones, hobby crafts, home or industrial precison applications of CA glues, inks, perfume, lubricants, sealants etc
  • Syringe calibrations are large and easy to read, easy see through for accuracy, 18 Gauge stainless steel blunt tip needle large and long enough for most use case
  • Package included 10pcs 5ml syringe, 10pcs 18G 1.5" Blunt Tip Needles, all pack in a pouch bag, With 100% money back guarantee
DISCOUNTLatest Stratasys uprint se plus 3d printer
solder sucker pump with innovative 'enveloping' silicone nozzle. Made in Japan. engineer SS-02
  • Innovative Silicone Nozzle allows closer placement to soldering iron tip (therefore better suction & better solder removal)
  • Compact design allows easy one handed operation
  • Withstands direct contact with soldering iron (350C Max)
  • Highest quality construction & components used
  • Made in Japan
Latest Stratasys uprint se plus 3d printer
ZHITING 2 Pack 3D Printer Heat Bed Power Module 3D Printer Board Expansion Board MOS Tube High Current Load Module
  • A general add-on heated bed power expansion module for 3D printer
  • Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8
  • With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A
  • Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.)
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board, According to the thermal power of the bed, please choose the appropriate power supply, with sufficient margin. If it is large power heated, we suggest 24V power supply, under the same power requirements, current is less than 12 v

Buy Stratasys uprint se plus 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Stratasys uprint se plus 3d printer, buy Stratasys uprint se plus 3d printer directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Stratasys uprint se plus 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


Best
ELEGOO Mars Pro 3D Printer, MSLA UV Photocuring 3D Printer with Activated Carbon Front USB Port 3.5'' Touch Screen, Matrix UV LED Light Source Off-Line Print Printing Size 115x65x150mm
  • 【What's PRO than Mars? 】BGW15CA Linear guideway with accuracy of 0.02mm, smoother, quieter and more stable. 50w Matrix LED UV light source offer more uniform light emission, curing time lower to 6s per layer. Built-in Activated Carbon Filter, additional cover rubber sealing, no need to worry about the odor of resin
  • 【Convenient and Easy to Use】The build plate has changed to CNC turning CD pattern, which provides stronger adhesion when printing. The improved translucent resin vat is lighter. The USB port has changed to front from back, it is more convenient to plug the flash drive. Mars Pro also refactored user interface with dark background and simulant icons
  • 【Add Air Filter System】Mars Pro add a rubber sealing to the upper cover to prevent the resin odor from out of the cover. The built-in activated carbon filter can absorb and eliminate odor, so there is no need to worry about resin odor during printing
  • 【Better Printing Quality】Thanks to the upgraded Matrix 28 50W UV LED light source,the uniformity of light is increased to 95%. It means more accurate print size, layer exposure time is also reduced to 6 seconds. Mars 2 support .ctb format, smaller files but greatly increase the success rate of printing of bigger models
  • 【MSLA Technology】Digital mask controls which regions of the print area are illuminated by a panel light source array. This allows every object on the built plate to be photocured simultaneously. It means an ELEGOO Mars Pro printer can print 2 and more models as quickly as one. Mars Pro MSLA printer are much faster than SLA or DLP printers
Best
Comgrow Creality Ender 3 Pro 3D Printer with Glass Plate, Upgrade Cmagnet Build Surface Plate and UL Certified Meanwell Power Supply Build Volume 220x220x250mm
  • Upgraded Version: It is an upgraded version of Ender 3, comes with extra glass plate, Cmagnet build surface, and also MeanWell power supply. The Ender 3 Pro boasts the same outstanding performance as the Ender 3, upgraded components make this 3D printer more stable, durable and easier to operate.
  • MeanWell Power Supply: Equipped with UL certified MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing.
  • Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • Resume Printing Function: Shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • What You Get: Ceality Ender 3 Pro 3D pinrter, Glass plate, lifetime technical assistance and 24 hours professional customer service.
Best
Creality Ender 5 Pro 3D Printer with Silent Mainboard Pre-installed,Capricorn Tube, Metal Exruder,220 * 220 * 300mm Build Volume, Removable Platform, Dual Y-Axis,Modular Design
  • Three Upgraded Based on Ender 5 - V1.1.5 Silent Motherboard pre-installed,allowing for quieter and more precise printing performance. Durable Metal Extruder provides strongers pressure while pushing filament through the nozzoles which will bolster the overall printig performance.Capricorn Premium PTFE Tube makes the Creality Ender 5 pro 3d printer better suited to print with flexible filaments and other exotic materials.
  • Stable Cubic Structure: Creality Ender 5 pro desktop 3d printer has a stable box-like frame and an increased Z-axis reach. It's not only allows for taller prints based on Ender 3 series printer, the more sturdy and steady frame improves precision for both small and big prints.
  • Resume Printing Function: Ender 5 Pro is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • More stability performance: Equipped with dual Y axis motors and down-shift Z axis, moving more smoothly, fewer points of failure and fewer headaches.
  • Beginner Friendly - Ender 5 Pro comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic construction of 3D printer.Even if you are a beginner,there is nothing to worried about.
Best
Creality Ender 3 Pro 3D Printers with Printing Resume Big Volume 220 * 220 * 250mm Flexible Removable Hotbed Building Surface
  • [MeanWell Power Supply] - We adopt the MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • [More Stable] - Redesigned with a much more sturdy, 40x40 aluminum extrusion for the Y-axis base. This provides stability for the printing process, leading to better print quality.
  • [Superior Printing Surface] - A new state of the art “C-MAG” magnetic sticker is designed for Ender 3 Pro, it is entirely removable, flexible and can better adhere to the platform. Once the model is finished printing, remove the magnetic upper from the lower and bend or flex the print surface to watch the model effortlessly pop off the printing surface.
  • [Enriched Accessories] - It must be surprising that more useful accessories included in our package. Extra parts can save you time while you need, also cost-effective.
Best
uPrint Tip Replacement Kit - SE and SE plus
  • Contents: 1 tip for modelling material, 1 tip for support material, 8 tip shields, 4 tip wipe assemblies

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Stratasys uprint se plus 3d printer

Here is the ranking of the best Stratasys uprint se plus 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Stratasys uprint se plus 3d printer and read the reviews left by real customers, see the Stratasys uprint se plus 3d printer ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Stratasys uprint se plus 3d printer New
no-branded 3d Printer CR-10 MAX 3D Printer Large Size 450 * 450 * 470mm Auto Leveling Resume Print Filament Detection With 4.3inch Touch-Screen CGFEUR
  • Golden triangle to reduce errors due to the vibration of Z axis during printing, more stable structure.
  • Support automatic leveling, comprehensive measurement point, precise induction and dynamic leveling compensation.
  • CR-10 Max features two models of nozzles to cater to different printing requirements of different users.
  • CR-10 Max has two power supplies for motherboard and hotbed respectively by way of two-way output and split flow to reduce electromagnetic interference to motherboard when the hotbed is powered by single power supply.
Stratasys uprint se plus 3d printer New
ZHITING 2 Pack 3D Printer Heat Bed Power Module 3D Printer Board Expansion Board MOS Tube High Current Load Module
  • A general add-on heated bed power expansion module for 3D printer
  • Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8
  • With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A
  • Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.)
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board, According to the thermal power of the bed, please choose the appropriate power supply, with sufficient margin. If it is large power heated, we suggest 24V power supply, under the same power requirements, current is less than 12 v
Stratasys uprint se plus 3d printer New
BIGTREETECH MMU2 DIP Filament PLA Select filament consumable port 5 colors Support TMC2209/TMC5160 Apply to prusa i3 MK3S/MK2.5S 3D Printer
  • 1. Firmware link: https://github.com/bigtreetech.
  • 2. Master chip:STM32F030C8T6.
  • 3. Used to select consumables port, Support up to 5 color printing and multiple driver models.
  • 4. Driver modes: TMC Driver-UART Mode / Driver-SPI Mode.
  • 5. 24-hour service: Don't worry about after-sales problems, please contact us if necessary, we will solve it for you.
DISCOUNTStratasys uprint se plus 3d printer New
Creality Upgraded Ender 5 Plus V2.2.1 Silent Mainboard with TMC2208 Driver, Super Quiet Mute Motherboard for CR-10S/ CR-10 S4/ CR-10 S5/ CR-X/CR-20/ CR-20 PRO 3D Printer
  • Upgraded silent mainboard for creality ender 5 plus printer, just plug it in and you could start printing. If use for CR-10S/ CR-10 S4/ CR-10 S5/ CR-X/CR-20/ CR-20 PRO , please update the firmware first.
  • Super Quiet and Noise Reduction. Use TMC2208 Stepper Motor Drivers, which the key component to eliminate the printer's motor when printing.
  • Notice: This new upgraded silent mainboard does not currently come pre-installed on ender 5 plus.
  • Bootloader pre-installed. The firmware can be modified by Cura with the USB cable.
  • Concern for safety. Thermal runaway protection is enabled, if the temperature rises out of control, the printer will stop heating and halt automatically.
Stratasys uprint se plus 3d printer New
Mini 3D Printer for Beginners, Priting Size 100 * 100 * 100mm, Composite Material with Visible Window, Lower Noisy, Print DIY, Gifts, Crafts, Building Models
  • 【Portable 3D Printer】Size: L18.8*D18.8*H19.8cm, Weight: 1.5KG, small size, light weight, easy to carry, when you go out, you can take it anywhere and print out your favorite items anytime, anywhere.
  • 【Easy to Use】The integrated design of this portable 3D printer, without manual installation, can be used directly, one-key printing, press the print button after inserting the TF card, NANO will automatically print after warming up.
  • 【Detachable Platform】The detachable platform of the printer makes it easy to take down the finished work without using a knife, and it is easy to clean. Built-in high-quality motor motor, better conductivity, more stable and uniform printing, lower noise.
  • 【Safe Materials】The mini 3D printer is made of high-quality materials, with stable structure, accurate printing, safe and non-toxic, no harmful substances will be emitted during use, and the user's health is guaranteed, and it can be used with confidence.
  • 【DIY Fun】3D printer is very suitable for children, beginners and amateurs to use, can cultivate children's hobbies, innovative thinking. Parents can use the printer in their spare time to print small items with their children, and spend good parent-child time.
Stratasys uprint se plus 3d printer New
ELEGOO Mars Pro 3D Printer, MSLA UV Photocuring 3D Printer with Activated Carbon Front USB Port 3.5'' Touch Screen, Matrix UV LED Light Source Off-Line Print Printing Size 115x65x150mm
  • 【What's PRO than Mars? 】BGW15CA Linear guideway with accuracy of 0.02mm, smoother, quieter and more stable. 50w Matrix LED UV light source offer more uniform light emission, curing time lower to 6s per layer. Built-in Activated Carbon Filter, additional cover rubber sealing, no need to worry about the odor of resin
  • 【Convenient and Easy to Use】The build plate has changed to CNC turning CD pattern, which provides stronger adhesion when printing. The improved translucent resin vat is lighter. The USB port has changed to front from back, it is more convenient to plug the flash drive. Mars Pro also refactored user interface with dark background and simulant icons
  • 【Add Air Filter System】Mars Pro add a rubber sealing to the upper cover to prevent the resin odor from out of the cover. The built-in activated carbon filter can absorb and eliminate odor, so there is no need to worry about resin odor during printing
  • 【Better Printing Quality】Thanks to the upgraded Matrix 28 50W UV LED light source,the uniformity of light is increased to 95%. It means more accurate print size, layer exposure time is also reduced to 6 seconds. Mars 2 support .ctb format, smaller files but greatly increase the success rate of printing of bigger models
  • 【MSLA Technology】Digital mask controls which regions of the print area are illuminated by a panel light source array. This allows every object on the built plate to be photocured simultaneously. It means an ELEGOO Mars Pro printer can print 2 and more models as quickly as one. Mars Pro MSLA printer are much faster than SLA or DLP printers
Stratasys uprint se plus 3d printer New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Stratasys uprint se plus 3d printer New
Official Creality Ender 5 Plus 3D Printer with BL Touch, Tempered Glass Plate and Touch Color Screen, Large Build Volume 350X350X400mm
  • BLTouch Auto Bed Leveling Sensor: It can precisely measure the tilt of hot bed surface and offers Z axis leveling compensation. Saving your time and reducing waste.
  • Equipped with Two Lead Screws on Z Axis: The hot bed was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of failure and fewer headaches.
  • Dual Y Axis Motors: Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing.
  • Easy to Assemble and Operate: Ender 5 Plus uses touch color screen for easy and quick operation. It comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic construction of 3D printer.
  • Extra Glass Plate: Add a tempered glass plate on the heated bed, which makes models are easier to be removed. It also makes the hot bed more flat and provide all-around protection.
Stratasys uprint se plus 3d printer New
Irfora 3D Printer, Original ET5X FDM 3D Printer Kit All Full Metal Frame 3.5 Inch Color Touchscreen Support Auto Leveling Resume Printing Filament Run Out Detection 300 * 300 * 400mm Build Volume
  • Pre-assembled 3D printer, modular installation, can be installed and used in only 10 minutes, saving time and effort. Enclosed metal unibody design enables a more stable and reliable structure with compact size.
  • With automatic leveling function, get rid of the trouble of manual leveling; At the same time, you can also level it manually to experience DIY hands-on fun.
  • Support filament run out detection, timely remind filament shortage or cut-off filament. Automatic load and unload the filament with just a click. With 3.5 inch color touchscreen for easy operation.
  • Resume printing function, when the power is restored, the printer will continue to print from the interruption point, no worries about unexpected power outages.
  • New industrial grade chipset that allows more accurate, fast and safe print. Protected with safety features like overcurrent protection, overload protection, temperature out of control protection (turn off the heating switch automatically) and other functions.

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Stratasys uprint se plus 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Stratasys uprint se plus 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

TONGDAUR CR-10 MAX 3D Printer Large Size 450 * 450 * 470mm Auto Leveling Resume Print Filament Detection With 4.3inch Touch-Screen
  • Strict Test: Strict testing for key components before delivery. Simple, high quality, smart and accurate.
  • Golden triangle to reduce errors due to the vibration of Z axis during printing, more stable structure.
  • Support automatic leveling, comprehensive measurement point, precise induction and dynamic leveling compensation.
  • CR-10 Max features two models of nozzles to cater to different printing requirements of different users.
  • CR-10 Max has two power supplies for motherboard and hotbed respectively by way of two-way output and split flow to reduce electromagnetic interference to motherboard when the hotbed is powered by single power supply.
Jsdoin 3D 1.75mm PLA Printer Filament, PLA Filament Pack,20 Color 320 Feet,16 Feet Per Color,for Most Intelligent 3D Pen
  • 【NON-TOXIC & ECO-FRIENDLY, SAFER TO KIDS】 :PLA is a biological material that is refined from corn and grain. no smell, nontoxic, premium grade material keeps printing smoothly, almost no jam with filaments flowing evenly. Without a nasty smell and safe for kids.
  • 【EXTRUSION TEMPERATURE】:3d printer pen filament extrusion temperature is between 160 and 200°C which is lower than ABS
  • 【ENJOY 20 UNIQUE COLOR PACKS】:20 packages of 3d filament, doodles, available in various colors for your artistic work 3d idea. A great gift for your children and art Lover to have fun with crafts and drawing.
  • 【GOOD PERFORMANCE】 -- High Diameter Accuracy +/-0.02mm, It keeps your 3D Printing Very Smoothly and Easily
  • 【STRONG COMPATIBILITY】 -- It can be used for most of the 3d printing pens where excellent detailing and application requirements are needed. Because of the color classification, it makes the 3D pen more useful in crafting the product of your own choices. It offers optimum flow through the nozzle, which ensure a smooth printing experience. Easy to use for kids and adults.
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
ELEGOO Mars Pro 3D Printer, MSLA UV Photocuring 3D Printer with Activated Carbon Front USB Port 3.5'' Touch Screen, Matrix UV LED Light Source Off-Line Print Printing Size 115x65x150mm
  • 【What's PRO than Mars? 】BGW15CA Linear guideway with accuracy of 0.02mm, smoother, quieter and more stable. 50w Matrix LED UV light source offer more uniform light emission, curing time lower to 6s per layer. Built-in Activated Carbon Filter, additional cover rubber sealing, no need to worry about the odor of resin
  • 【Convenient and Easy to Use】The build plate has changed to CNC turning CD pattern, which provides stronger adhesion when printing. The improved translucent resin vat is lighter. The USB port has changed to front from back, it is more convenient to plug the flash drive. Mars Pro also refactored user interface with dark background and simulant icons
  • 【Add Air Filter System】Mars Pro add a rubber sealing to the upper cover to prevent the resin odor from out of the cover. The built-in activated carbon filter can absorb and eliminate odor, so there is no need to worry about resin odor during printing
  • 【Better Printing Quality】Thanks to the upgraded Matrix 28 50W UV LED light source,the uniformity of light is increased to 95%. It means more accurate print size, layer exposure time is also reduced to 6 seconds. Mars 2 support .ctb format, smaller files but greatly increase the success rate of printing of bigger models
  • 【MSLA Technology】Digital mask controls which regions of the print area are illuminated by a panel light source array. This allows every object on the built plate to be photocured simultaneously. It means an ELEGOO Mars Pro printer can print 2 and more models as quickly as one. Mars Pro MSLA printer are much faster than SLA or DLP printers
Official Creality Ender 5 Plus 3D Printer with BL Touch, Tempered Glass Plate and Touch Color Screen, Large Build Volume 350X350X400mm
  • BLTouch Auto Bed Leveling Sensor: It can precisely measure the tilt of hot bed surface and offers Z axis leveling compensation. Saving your time and reducing waste.
  • Equipped with Two Lead Screws on Z Axis: The hot bed was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of failure and fewer headaches.
  • Dual Y Axis Motors: Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing.
  • Easy to Assemble and Operate: Ender 5 Plus uses touch color screen for easy and quick operation. It comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic construction of 3D printer.
  • Extra Glass Plate: Add a tempered glass plate on the heated bed, which makes models are easier to be removed. It also makes the hot bed more flat and provide all-around protection.

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Stratasys uprint se plus 3d printer actually costs.

DISCOUNTLatest Stratasys uprint se plus 3d printer
Creality Upgraded Ender 5 Plus V2.2.1 Silent Mainboard with TMC2208 Driver, Super Quiet Mute Motherboard for CR-10S/ CR-10 S4/ CR-10 S5/ CR-X/CR-20/ CR-20 PRO 3D Printer
  • Upgraded silent mainboard for creality ender 5 plus printer, just plug it in and you could start printing. If use for CR-10S/ CR-10 S4/ CR-10 S5/ CR-X/CR-20/ CR-20 PRO , please update the firmware first.
  • Super Quiet and Noise Reduction. Use TMC2208 Stepper Motor Drivers, which the key component to eliminate the printer's motor when printing.
  • Notice: This new upgraded silent mainboard does not currently come pre-installed on ender 5 plus.
  • Bootloader pre-installed. The firmware can be modified by Cura with the USB cable.
  • Concern for safety. Thermal runaway protection is enabled, if the temperature rises out of control, the printer will stop heating and halt automatically.
Latest Stratasys uprint se plus 3d printer
Comgrow Creality Ender 3 Pro 3D Printer with Glass Plate, Upgrade Cmagnet Build Surface Plate and UL Certified Meanwell Power Supply Build Volume 220x220x250mm
  • Upgraded Version: It is an upgraded version of Ender 3, comes with extra glass plate, Cmagnet build surface, and also MeanWell power supply. The Ender 3 Pro boasts the same outstanding performance as the Ender 3, upgraded components make this 3D printer more stable, durable and easier to operate.
  • MeanWell Power Supply: Equipped with UL certified MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing.
  • Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • Resume Printing Function: Shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • What You Get: Ceality Ender 3 Pro 3D pinrter, Glass plate, lifetime technical assistance and 24 hours professional customer service.
Latest Stratasys uprint se plus 3d printer
Creality Ender 5 Pro 3D Printer with Silent Mainboard Pre-installed,Capricorn Tube, Metal Exruder,220 * 220 * 300mm Build Volume, Removable Platform, Dual Y-Axis,Modular Design
  • Three Upgraded Based on Ender 5 - V1.1.5 Silent Motherboard pre-installed,allowing for quieter and more precise printing performance. Durable Metal Extruder provides strongers pressure while pushing filament through the nozzoles which will bolster the overall printig performance.Capricorn Premium PTFE Tube makes the Creality Ender 5 pro 3d printer better suited to print with flexible filaments and other exotic materials.
  • Stable Cubic Structure: Creality Ender 5 pro desktop 3d printer has a stable box-like frame and an increased Z-axis reach. It's not only allows for taller prints based on Ender 3 series printer, the more sturdy and steady frame improves precision for both small and big prints.
  • Resume Printing Function: Ender 5 Pro is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • More stability performance: Equipped with dual Y axis motors and down-shift Z axis, moving more smoothly, fewer points of failure and fewer headaches.
  • Beginner Friendly - Ender 5 Pro comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic construction of 3D printer.Even if you are a beginner,there is nothing to worried about.
Latest Stratasys uprint se plus 3d printer
ELEGOO Mars Pro 3D Printer, MSLA UV Photocuring 3D Printer with Activated Carbon Front USB Port 3.5'' Touch Screen, Matrix UV LED Light Source Off-Line Print Printing Size 115x65x150mm
  • 【What's PRO than Mars? 】BGW15CA Linear guideway with accuracy of 0.02mm, smoother, quieter and more stable. 50w Matrix LED UV light source offer more uniform light emission, curing time lower to 6s per layer. Built-in Activated Carbon Filter, additional cover rubber sealing, no need to worry about the odor of resin
  • 【Convenient and Easy to Use】The build plate has changed to CNC turning CD pattern, which provides stronger adhesion when printing. The improved translucent resin vat is lighter. The USB port has changed to front from back, it is more convenient to plug the flash drive. Mars Pro also refactored user interface with dark background and simulant icons
  • 【Add Air Filter System】Mars Pro add a rubber sealing to the upper cover to prevent the resin odor from out of the cover. The built-in activated carbon filter can absorb and eliminate odor, so there is no need to worry about resin odor during printing
  • 【Better Printing Quality】Thanks to the upgraded Matrix 28 50W UV LED light source,the uniformity of light is increased to 95%. It means more accurate print size, layer exposure time is also reduced to 6 seconds. Mars 2 support .ctb format, smaller files but greatly increase the success rate of printing of bigger models
  • 【MSLA Technology】Digital mask controls which regions of the print area are illuminated by a panel light source array. This allows every object on the built plate to be photocured simultaneously. It means an ELEGOO Mars Pro printer can print 2 and more models as quickly as one. Mars Pro MSLA printer are much faster than SLA or DLP printers
Latest Stratasys uprint se plus 3d printer
uPrint Tip Replacement Kit - SE and SE plus
  • Contents: 1 tip for modelling material, 1 tip for support material, 8 tip shields, 4 tip wipe assemblies
Latest Stratasys uprint se plus 3d printer
Creality Ender 3 Pro 3D Printers with Printing Resume Big Volume 220 * 220 * 250mm Flexible Removable Hotbed Building Surface
  • [MeanWell Power Supply] - We adopt the MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • [More Stable] - Redesigned with a much more sturdy, 40x40 aluminum extrusion for the Y-axis base. This provides stability for the printing process, leading to better print quality.
  • [Superior Printing Surface] - A new state of the art “C-MAG” magnetic sticker is designed for Ender 3 Pro, it is entirely removable, flexible and can better adhere to the platform. Once the model is finished printing, remove the magnetic upper from the lower and bend or flex the print surface to watch the model effortlessly pop off the printing surface.
  • [Enriched Accessories] - It must be surprising that more useful accessories included in our package. Extra parts can save you time while you need, also cost-effective.
Latest Stratasys uprint se plus 3d printer
Shintop 5ml Syringe with 18G 1.5'' Blunt Tip Needles for Experiments, Industrial Use (10 Pack)
  • Syringe Measurement Range: 5 ML, Non-Sterile blunt tip needles is not for injection, industrial use only
  • Polypropylene Barrel/Plunger, For measuring and dispensing fluids/chemicals, lab use and experiments
  • Also great for essential oil, science lab, flat back rhinestones, hobby crafts, home or industrial precison applications of CA glues, inks, perfume, lubricants, sealants etc
  • Syringe calibrations are large and easy to read, easy see through for accuracy, 18 Gauge stainless steel blunt tip needle large and long enough for most use case
  • Package included 10pcs 5ml syringe, 10pcs 18G 1.5" Blunt Tip Needles, all pack in a pouch bag, With 100% money back guarantee
DISCOUNTLatest Stratasys uprint se plus 3d printer
solder sucker pump with innovative 'enveloping' silicone nozzle. Made in Japan. engineer SS-02
  • Innovative Silicone Nozzle allows closer placement to soldering iron tip (therefore better suction & better solder removal)
  • Compact design allows easy one handed operation
  • Withstands direct contact with soldering iron (350C Max)
  • Highest quality construction & components used
  • Made in Japan
Latest Stratasys uprint se plus 3d printer
ZHITING 2 Pack 3D Printer Heat Bed Power Module 3D Printer Board Expansion Board MOS Tube High Current Load Module
  • A general add-on heated bed power expansion module for 3D printer
  • Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8
  • With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A
  • Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.)
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board, According to the thermal power of the bed, please choose the appropriate power supply, with sufficient margin. If it is large power heated, we suggest 24V power supply, under the same power requirements, current is less than 12 v

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Stratasys uprint se plus 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Stratasys uprint se plus 3d printer which are among the cheapest on the market. Just scroll through the list to find Stratasys uprint se plus 3d printer the cheapest products.

Catalog

The product Stratasys uprint se plus 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.

Stratasys uprint se plus 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Stratasys uprint se plus 3d printer New
no-branded 3d Printer CR-10 MAX 3D Printer Large Size 450 * 450 * 470mm Auto Leveling Resume Print Filament Detection With 4.3inch Touch-Screen CGFEUR
  • Golden triangle to reduce errors due to the vibration of Z axis during printing, more stable structure.
  • Support automatic leveling, comprehensive measurement point, precise induction and dynamic leveling compensation.
  • CR-10 Max features two models of nozzles to cater to different printing requirements of different users.
  • CR-10 Max has two power supplies for motherboard and hotbed respectively by way of two-way output and split flow to reduce electromagnetic interference to motherboard when the hotbed is powered by single power supply.
Stratasys uprint se plus 3d printer New
ZHITING 2 Pack 3D Printer Heat Bed Power Module 3D Printer Board Expansion Board MOS Tube High Current Load Module
  • A general add-on heated bed power expansion module for 3D printer
  • Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8
  • With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A
  • Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.)
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board, According to the thermal power of the bed, please choose the appropriate power supply, with sufficient margin. If it is large power heated, we suggest 24V power supply, under the same power requirements, current is less than 12 v
Stratasys uprint se plus 3d printer New
BIGTREETECH MMU2 DIP Filament PLA Select filament consumable port 5 colors Support TMC2209/TMC5160 Apply to prusa i3 MK3S/MK2.5S 3D Printer
  • 1. Firmware link: https://github.com/bigtreetech.
  • 2. Master chip:STM32F030C8T6.
  • 3. Used to select consumables port, Support up to 5 color printing and multiple driver models.
  • 4. Driver modes: TMC Driver-UART Mode / Driver-SPI Mode.
  • 5. 24-hour service: Don't worry about after-sales problems, please contact us if necessary, we will solve it for you.
DISCOUNTStratasys uprint se plus 3d printer New
Creality Upgraded Ender 5 Plus V2.2.1 Silent Mainboard with TMC2208 Driver, Super Quiet Mute Motherboard for CR-10S/ CR-10 S4/ CR-10 S5/ CR-X/CR-20/ CR-20 PRO 3D Printer
  • Upgraded silent mainboard for creality ender 5 plus printer, just plug it in and you could start printing. If use for CR-10S/ CR-10 S4/ CR-10 S5/ CR-X/CR-20/ CR-20 PRO , please update the firmware first.
  • Super Quiet and Noise Reduction. Use TMC2208 Stepper Motor Drivers, which the key component to eliminate the printer's motor when printing.
  • Notice: This new upgraded silent mainboard does not currently come pre-installed on ender 5 plus.
  • Bootloader pre-installed. The firmware can be modified by Cura with the USB cable.
  • Concern for safety. Thermal runaway protection is enabled, if the temperature rises out of control, the printer will stop heating and halt automatically.
Stratasys uprint se plus 3d printer New
Mini 3D Printer for Beginners, Priting Size 100 * 100 * 100mm, Composite Material with Visible Window, Lower Noisy, Print DIY, Gifts, Crafts, Building Models
  • 【Portable 3D Printer】Size: L18.8*D18.8*H19.8cm, Weight: 1.5KG, small size, light weight, easy to carry, when you go out, you can take it anywhere and print out your favorite items anytime, anywhere.
  • 【Easy to Use】The integrated design of this portable 3D printer, without manual installation, can be used directly, one-key printing, press the print button after inserting the TF card, NANO will automatically print after warming up.
  • 【Detachable Platform】The detachable platform of the printer makes it easy to take down the finished work without using a knife, and it is easy to clean. Built-in high-quality motor motor, better conductivity, more stable and uniform printing, lower noise.
  • 【Safe Materials】The mini 3D printer is made of high-quality materials, with stable structure, accurate printing, safe and non-toxic, no harmful substances will be emitted during use, and the user's health is guaranteed, and it can be used with confidence.
  • 【DIY Fun】3D printer is very suitable for children, beginners and amateurs to use, can cultivate children's hobbies, innovative thinking. Parents can use the printer in their spare time to print small items with their children, and spend good parent-child time.
Stratasys uprint se plus 3d printer New
ELEGOO Mars Pro 3D Printer, MSLA UV Photocuring 3D Printer with Activated Carbon Front USB Port 3.5'' Touch Screen, Matrix UV LED Light Source Off-Line Print Printing Size 115x65x150mm
  • 【What's PRO than Mars? 】BGW15CA Linear guideway with accuracy of 0.02mm, smoother, quieter and more stable. 50w Matrix LED UV light source offer more uniform light emission, curing time lower to 6s per layer. Built-in Activated Carbon Filter, additional cover rubber sealing, no need to worry about the odor of resin
  • 【Convenient and Easy to Use】The build plate has changed to CNC turning CD pattern, which provides stronger adhesion when printing. The improved translucent resin vat is lighter. The USB port has changed to front from back, it is more convenient to plug the flash drive. Mars Pro also refactored user interface with dark background and simulant icons
  • 【Add Air Filter System】Mars Pro add a rubber sealing to the upper cover to prevent the resin odor from out of the cover. The built-in activated carbon filter can absorb and eliminate odor, so there is no need to worry about resin odor during printing
  • 【Better Printing Quality】Thanks to the upgraded Matrix 28 50W UV LED light source,the uniformity of light is increased to 95%. It means more accurate print size, layer exposure time is also reduced to 6 seconds. Mars 2 support .ctb format, smaller files but greatly increase the success rate of printing of bigger models
  • 【MSLA Technology】Digital mask controls which regions of the print area are illuminated by a panel light source array. This allows every object on the built plate to be photocured simultaneously. It means an ELEGOO Mars Pro printer can print 2 and more models as quickly as one. Mars Pro MSLA printer are much faster than SLA or DLP printers
Stratasys uprint se plus 3d printer New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Stratasys uprint se plus 3d printer New
Official Creality Ender 5 Plus 3D Printer with BL Touch, Tempered Glass Plate and Touch Color Screen, Large Build Volume 350X350X400mm
  • BLTouch Auto Bed Leveling Sensor: It can precisely measure the tilt of hot bed surface and offers Z axis leveling compensation. Saving your time and reducing waste.
  • Equipped with Two Lead Screws on Z Axis: The hot bed was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of failure and fewer headaches.
  • Dual Y Axis Motors: Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing.
  • Easy to Assemble and Operate: Ender 5 Plus uses touch color screen for easy and quick operation. It comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic construction of 3D printer.
  • Extra Glass Plate: Add a tempered glass plate on the heated bed, which makes models are easier to be removed. It also makes the hot bed more flat and provide all-around protection.
Stratasys uprint se plus 3d printer New
Irfora 3D Printer, Original ET5X FDM 3D Printer Kit All Full Metal Frame 3.5 Inch Color Touchscreen Support Auto Leveling Resume Printing Filament Run Out Detection 300 * 300 * 400mm Build Volume
  • Pre-assembled 3D printer, modular installation, can be installed and used in only 10 minutes, saving time and effort. Enclosed metal unibody design enables a more stable and reliable structure with compact size.
  • With automatic leveling function, get rid of the trouble of manual leveling; At the same time, you can also level it manually to experience DIY hands-on fun.
  • Support filament run out detection, timely remind filament shortage or cut-off filament. Automatic load and unload the filament with just a click. With 3.5 inch color touchscreen for easy operation.
  • Resume printing function, when the power is restored, the printer will continue to print from the interruption point, no worries about unexpected power outages.
  • New industrial grade chipset that allows more accurate, fast and safe print. Protected with safety features like overcurrent protection, overload protection, temperature out of control protection (turn off the heating switch automatically) and other functions.

Where to buy?

If you are asking yourself where to buy Stratasys uprint se plus 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Stratasys uprint se plus 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Stratasys uprint se plus 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Stratasys uprint se plus 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Stratasys uprint se plus 3d printer used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Stratasys uprint se plus 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

TONGDAUR CR-10 MAX 3D Printer Large Size 450 * 450 * 470mm Auto Leveling Resume Print Filament Detection With 4.3inch Touch-Screen
  • Strict Test: Strict testing for key components before delivery. Simple, high quality, smart and accurate.
  • Golden triangle to reduce errors due to the vibration of Z axis during printing, more stable structure.
  • Support automatic leveling, comprehensive measurement point, precise induction and dynamic leveling compensation.
  • CR-10 Max features two models of nozzles to cater to different printing requirements of different users.
  • CR-10 Max has two power supplies for motherboard and hotbed respectively by way of two-way output and split flow to reduce electromagnetic interference to motherboard when the hotbed is powered by single power supply.
Jsdoin 3D 1.75mm PLA Printer Filament, PLA Filament Pack,20 Color 320 Feet,16 Feet Per Color,for Most Intelligent 3D Pen
  • 【NON-TOXIC & ECO-FRIENDLY, SAFER TO KIDS】 :PLA is a biological material that is refined from corn and grain. no smell, nontoxic, premium grade material keeps printing smoothly, almost no jam with filaments flowing evenly. Without a nasty smell and safe for kids.
  • 【EXTRUSION TEMPERATURE】:3d printer pen filament extrusion temperature is between 160 and 200°C which is lower than ABS
  • 【ENJOY 20 UNIQUE COLOR PACKS】:20 packages of 3d filament, doodles, available in various colors for your artistic work 3d idea. A great gift for your children and art Lover to have fun with crafts and drawing.
  • 【GOOD PERFORMANCE】 -- High Diameter Accuracy +/-0.02mm, It keeps your 3D Printing Very Smoothly and Easily
  • 【STRONG COMPATIBILITY】 -- It can be used for most of the 3d printing pens where excellent detailing and application requirements are needed. Because of the color classification, it makes the 3D pen more useful in crafting the product of your own choices. It offers optimum flow through the nozzle, which ensure a smooth printing experience. Easy to use for kids and adults.
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
ELEGOO Mars Pro 3D Printer, MSLA UV Photocuring 3D Printer with Activated Carbon Front USB Port 3.5'' Touch Screen, Matrix UV LED Light Source Off-Line Print Printing Size 115x65x150mm
  • 【What's PRO than Mars? 】BGW15CA Linear guideway with accuracy of 0.02mm, smoother, quieter and more stable. 50w Matrix LED UV light source offer more uniform light emission, curing time lower to 6s per layer. Built-in Activated Carbon Filter, additional cover rubber sealing, no need to worry about the odor of resin
  • 【Convenient and Easy to Use】The build plate has changed to CNC turning CD pattern, which provides stronger adhesion when printing. The improved translucent resin vat is lighter. The USB port has changed to front from back, it is more convenient to plug the flash drive. Mars Pro also refactored user interface with dark background and simulant icons
  • 【Add Air Filter System】Mars Pro add a rubber sealing to the upper cover to prevent the resin odor from out of the cover. The built-in activated carbon filter can absorb and eliminate odor, so there is no need to worry about resin odor during printing
  • 【Better Printing Quality】Thanks to the upgraded Matrix 28 50W UV LED light source,the uniformity of light is increased to 95%. It means more accurate print size, layer exposure time is also reduced to 6 seconds. Mars 2 support .ctb format, smaller files but greatly increase the success rate of printing of bigger models
  • 【MSLA Technology】Digital mask controls which regions of the print area are illuminated by a panel light source array. This allows every object on the built plate to be photocured simultaneously. It means an ELEGOO Mars Pro printer can print 2 and more models as quickly as one. Mars Pro MSLA printer are much faster than SLA or DLP printers
Official Creality Ender 5 Plus 3D Printer with BL Touch, Tempered Glass Plate and Touch Color Screen, Large Build Volume 350X350X400mm
  • BLTouch Auto Bed Leveling Sensor: It can precisely measure the tilt of hot bed surface and offers Z axis leveling compensation. Saving your time and reducing waste.
  • Equipped with Two Lead Screws on Z Axis: The hot bed was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of failure and fewer headaches.
  • Dual Y Axis Motors: Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing.
  • Easy to Assemble and Operate: Ender 5 Plus uses touch color screen for easy and quick operation. It comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic construction of 3D printer.
  • Extra Glass Plate: Add a tempered glass plate on the heated bed, which makes models are easier to be removed. It also makes the hot bed more flat and provide all-around protection.

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Stratasys uprint se plus 3d printer.

Rating: 3.54 of 5 - 24 votes
1 Star2 Stars3 Stars4 Stars5 Stars (24 votes, average: 3.54 out of 5)
Loading...