Sintron 3d printer kossel mini Reviews and Best Deals

Online product reviews and comparisons for Sintron 3d printer kossel mini.

DISCOUNTLatest Sintron 3d printer kossel mini
[Sintron] Kossel Mini Electronic Full Kit for DIY RepRap Rostock Delta 3D Printer with Bowden hotend+ MK8 Extruder + RAMPS 1.4 + LCD2004 + MEGA 2560 + A4988 + NEMA 17 Motor + Endstop + Round Aluminum MK3 heatbed + Filament
  • (1) We use well-designed Kossel MK8 extruder, high quality stepper motor and direct drive extrusion wheel, more accurate, quick heating and fluent injection, We have made necessary design, Printing speed up to 100mm/s.
  • (2) We use the latest MK3 Heatbed Round 3mm Aluminium PCB Board, dual power supply, operate at 12V or 24V. Heated bed keeps a certain temperature to prevent warping, and cooling fan speeds up solidification of the extruded filament. this would reduct your calibration time a lot !
  • (3) We offer LCD 2004 controller with SD card design support totally off-line print, no computer needed while printing. then you don't have to spare one computer for your 3D printer use only.
  • (4) We have pre-install the 3D printer firmware for you . so even you know nothing about firmware , you can still get it working .
  • (5) We don't just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can, please feel free to send us an email, we will also help you to complete the project !
Latest Sintron 3d printer kossel mini
Comgrow Creality 3D Ender 3 Pro 3D Printer with Cmagnet Build Plateform Surface 220x220x250mm Print Size
  • Upgrade Version: This is the upgrade version of Creality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size.
  • Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
  • Improved Mechanical Properties:The Ender 3 Pro has been redesigned with a more sturdy, 40×40 aluminum extrusion for the Y-axis base. This should improve the overall stability of the printing surface.
    Semi-assembled Kit: several assembled parts This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
  • WHAT CAN WE DO: As an authorised reseller of Creality 3D, we can offer 100% original products for you. And also can offer you professional customer service.
Latest Sintron 3d printer kossel mini
Creality Upgraded Direct Extruder Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Comes with 42-40 Stepper Motor, 1.75mm Direct Drive Extruder, Fan and Cables Support Flexible Filament
  • Upgraded direct ectruder kit for Ender 3, Ender 3 Pro and Ender 3 V2 3D Printer.
  • Support all 1.75mm diameter filament in the market, offers more precise and smoother extrusion.
  • Perfect for PLA and optimize the performance of remote printing with TPU and other flexible filaments.
  • Comes with 42-40 stepper motor. This direct extruder kit is made of aluminum alloy and plastic, durable and wear resistant.
  • With longer Extruder motor connecting cable, tools, accessories and wiring diagram instruction for installation, easy to assemble.
Latest Sintron 3d printer kossel mini
Redrex Upgraded Aluminum Bowden Extruder with 40 Teeth MK8 Drive Gear for Creality CR-10 Series and other Reprap Prusa 3D Printers
  • Bowden extrusion are supported:It comes with a nema stepper motor mount,works great on TEVO Tarantula i3,Anycubic Kossel i3 Mega,Flsun i3,MP Select and other bowden extrusion 3d printers as well.
  • Direct extrusion are supported:This upgrade parts can also work as MK8 extruder frame with some modifications
  • Recommend filament materials:PLA/ABS/Wood/TPU/PTEG,40 Teeth drive gear feeds the 1.75mm filament very smoothy.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Latest Sintron 3d printer kossel mini
ANYCUBIC Mega S 3D Printer, UltraBase Heated Build Plate + Upgrade Extruder Support 1.75mm PLA Filament, 8.27''(L) x8.27''(W) x8.07''(H) Print Size
  • Works Out Of the Box: 3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for expert users but also friendly use to beginners. The rigid metal frame can minimize the shaking to improve the print quality.
  • Upgraded Extruder Design: Taitan extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design compatible with most filaments, greatly reducing the clogging risk and improving printing accuracy.
  • Resume Print & Sesor Detection: Mega S 3D Printer can resume printing after power outage or any other unexpected stoppage.One click to resume from the last recorded position when suffering power outages. And the sensor pauses prints and sets off an alarm when you run out of filament which greatly saves time and cost , printing volume reaches 8.27 x 8.27 x 8.07 inches.
  • Anycubic Ultrabase: Patented 3D printer printing platform surface coated with patented microporous coating, with excellent adhesion when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print.
  • More Function: 1)TFT Touch Screen-As responsive as operating on the phone. 2)All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours professional customer service.
Latest Sintron 3d printer kossel mini
LABISTS 3D Printer with Touch Screen for PLA, ABS Filament, 220 x 220 x 250mm, Auto Leveling, Filament Run out Detection, Power Failure Resume Print,Fast Assembly and Fast Print
  • Higher Precision on Print: With a nozzle of 0.4mm, the LABISTS 3D printer can print higher precised model. With the hot bed, whose maximun temperature can arrive at 100 ℃, it can print without wrapping and bubble in the surface of the mode and can print with ABS and PLA filament
  • Automatic Leveling: The auto leveling 3d printer has leveling sensor, which is able to automatically adjust the distance between the glassbed and the nozzle in replace of adjusting it by your hand. Save your time in leveling and get more vivid printing quality
  • Resume Printing After Power Failure and Filament Runout: The 3D Printer can resume print from the position it stop when the power is off suddenly and when the filament is run out. Never need to worry about power failure and filament outages. No waste of filament and money
  • 2.8 Inch Full Color Touch Screen: With a 2.8 inch colorful touch screen, the 3D Printer is more simple and convenient to operate. Support automatic feeding and unloading function, easy to solve by feeding and refueling one button
  • Fast Assembly within Five Minutes: The 3D Printer comes with several assembled parts. And it only need Several Steps to connect it---connect the metal frame, the printer head and the drive belt, insert the cables, push the Bowden tube into the fitting and then the filament holder, easy to assemble in five minutes
Latest Sintron 3d printer kossel mini
SIMAX3D BMG Bowden extruder with two drives and 1.75 mm high-performance parts for CR10, Ender 3, Wanhao D9, Anet E10, Geeetech A10 and other DIY 3D printers
  • SIMAX3D dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy
  • Compared to other extruder, SIMAX3D BMG extruder uses double wheel to feed filament from two sides to make sure filament is evenly stressed and avoid filament slip.
  • Dual drive technology: It is easy to assemble and feed the filament smoothly and continuously without worrying about sanding or slipping under the most demanding conditions.
  • SIMAX3D BMG extruder is able to adjust the tightness with screw nut to fit with all 3D printing£¬filament solid &soft: PLA / ABS / PETG / TPU / NYLON / CARBON FIBER / WOOD
  • Suitable for most DIY 3D printers, such as Creality CR10, Ender 3 series, Wanhao D9, Anet E10, Geeetech A10 3D printer high-performance upgrade parts.
Latest Sintron 3d printer kossel mini
WINSINN 3D Printer Sensor Heater Block, Compatible with E3D V6 J-Head RepRap Bowden Hotend Extruder For HT-NTC100K PT100 - Aluminum (Pack of 5Pcs)
  • New V6 Sensor Heater Block - For HT-NTC100K PT100 sensor cartridge
  • Material: Aluminum alloy
  • For V6 nozzle (M6 Screw)
  • With Allen wrench, Easy to install
  • Made by WINSINN
DISCOUNTLatest Sintron 3d printer kossel mini
3D Printer Build Surface 220mm for Anet A8 for WanHao i3 Magnetic Anti-warping Detachable Square Black Eewolf (220x220)
  • A+B parts with magnetic detachable (Easier to take off models, anti-warping)
  • 3D Printer Build Surface: Please note the auto sensor could not detect the build surface directly.
  • Make it easier to adhere the filament to the heated bed when printing.
  • Compatible with Filament PLA, (not ABS, PETG)
  • Packing: 1* build surface included. 300g/pc

Buy Sintron 3d printer kossel mini from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Sintron 3d printer kossel mini, buy Sintron 3d printer kossel mini directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Sintron 3d printer kossel mini including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


DISCOUNTBest
[Sintron] Kossel Mini Electronic Full Kit for DIY RepRap Rostock Delta 3D Printer with Bowden hotend+ MK8 Extruder + RAMPS 1.4 + LCD2004 + MEGA 2560 + A4988 + NEMA 17 Motor + Endstop + Round Aluminum MK3 heatbed + Filament
  • (1) We use well-designed Kossel MK8 extruder, high quality stepper motor and direct drive extrusion wheel, more accurate, quick heating and fluent injection, We have made necessary design, Printing speed up to 100mm/s.
  • (2) We use the latest MK3 Heatbed Round 3mm Aluminium PCB Board, dual power supply, operate at 12V or 24V. Heated bed keeps a certain temperature to prevent warping, and cooling fan speeds up solidification of the extruded filament. this would reduct your calibration time a lot !
  • (3) We offer LCD 2004 controller with SD card design support totally off-line print, no computer needed while printing. then you don't have to spare one computer for your 3D printer use only.
  • (4) We have pre-install the 3D printer firmware for you . so even you know nothing about firmware , you can still get it working .
  • (5) We don't just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can, please feel free to send us an email, we will also help you to complete the project !
DISCOUNTBest
LABISTS 3D Printer with Touch Screen 220 x 220 x 250 mm for PLA, ABS Filament, Auto Leveling, Filament Run out Detection, Power Failure Resume Print,Fast Assembly and Fast Print
  • Higher Precision on Print: With a nozzle of 0.4mm, the LABISTS 3D printer can print higher precised model. With the hot bed, whose maximun temperature can arrive at 100 ℃, it can print without wrapping and bubble in the surface of the mode and can print with ABS and PLA filament.
  • Automatic Leveling: The auto leveling 3d printer has leveling sensor, which is able to automatically adjust the distance between the glassbed and the nozzle in replace of adjusting it by your hand. Save your time in leveling and get more vivid printing quality.
  • Resume Printing After Power Failure and Filament Runout: The 3D Printer can resume print from the position it stop when the power is off suddenly and when the filament is run out. Never need to worry about power failure and filament outages. No waste of filament and money.
  • 2.8 Inch Full Color Touch Screen: With a 2.8 inch colorful touch screen, the 3D Printer is more simple and convenient to operate. Support automatic feeding and unloading function, easy to solve by feeding and refueling one button
  • Fast Assembly within Five Minutes: The 3D Printer comes with several assembled parts. And it only need Several Steps to connect it---connect the metal frame, the printer head and the drive belt, insert the cables, push the Bowden tube into the fitting and then the filament holder, easy to assemble in five minutes.
Best
Comgrow Creality 3D Ender 3 Pro 3D Printer with Cmagnet Build Plateform Surface 220x220x250mm Print Size
  • Upgrade Version: This is the upgrade version of Creality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size.
  • Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
  • Improved Mechanical Properties:The Ender 3 Pro has been redesigned with a more sturdy, 40×40 aluminum extrusion for the Y-axis base. This should improve the overall stability of the printing surface.
    Semi-assembled Kit: several assembled parts This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
  • WHAT CAN WE DO: As an authorised reseller of Creality 3D, we can offer 100% original products for you. And also can offer you professional customer service.
Best
ANYCUBIC Mega S 3D Printer, UltraBase Heated Build Plate + Upgrade Extruder Support 1.75mm PLA Filament, 8.27''(L) x8.27''(W) x8.07''(H) Print Size
  • Works Out Of the Box: 3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for expert users but also friendly use to beginners. The rigid metal frame can minimize the shaking to improve the print quality.
  • Upgraded Extruder Design: Taitan extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design compatible with most filaments, greatly reducing the clogging risk and improving printing accuracy.
  • Resume Print & Sesor Detection: Mega S 3D Printer can resume printing after power outage or any other unexpected stoppage.One click to resume from the last recorded position when suffering power outages. And the sensor pauses prints and sets off an alarm when you run out of filament which greatly saves time and cost , printing volume reaches 8.27 x 8.27 x 8.07 inches.
  • Anycubic Ultrabase: Patented 3D printer printing platform surface coated with patented microporous coating, with excellent adhesion when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print.
  • More Function: 1)TFT Touch Screen-As responsive as operating on the phone. 2)All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours professional customer service.
Best
Creality 3D Ender-3 3D Printer DIY Easy-assemble 220 * 220 * 250mm Printing Size with Resume Printing Support PLA, ABS, TPU
  • High-precision 3D printer with ±0.1mm high printing accuracy, 220 * 220 * 250mm large printing size with one-piece structure, saving space but building the world.
  • MK-8 extruder greatly reduces plugging risk and bad extrustion; and the hotbed can reach 110℃ in about 5 minutes to meet the needs of fast heating and printing.
  • Safely protected power supply and resume printing function, if the machine is shut down or power failure accidentally, it can continue printing after power on.
  • Compatible with various 1.75mm printing filaments like PLA, ABS, TPU, etc; wide applications, can be used for product structure design, toy modeling, architectural design, parts manufacturing, etc.
  • CNC machining of Y-rail mounting groove to make sure precise positioning and keep the stable frame with high-precision printing quality. Adopts V-socket linear bearing system and wheel moving parts, super noiseless and smooth printing performance; big hand twist nut make the print platform easier to level.

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Sintron 3d printer kossel mini

Here is the ranking of the best Sintron 3d printer kossel mini, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Sintron 3d printer kossel mini and read the reviews left by real customers, see the Sintron 3d printer kossel mini ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Sintron 3d printer kossel mini New
GMZS 3D Printer - DIY Logo Engraver, 220 * 220 * 300Mm Build Volume with Upgrade Silent Motherboard PTFE Tubing Extruder
  • Imported blue PTFE Tube; Metal extruding unit, stable feeding and wear-resisting; 45°display screen, user-friendly design for easy usage; Double Y-axis control system with synchronous operation and stable output to avoid vibrations resulting from long-time printing.
  • Resume printing function, when the power is restored, the printer will continue to print from the interruption point. Large adjusting nuts, easy and fast leveling.
  • High standard V-Groove profile and pulley for running stably and smoothly, low noise and good wear resistant. Adopting soft magnetic self-adhesive platform, remove the model easier and excellent adhesion.
  • 220*220*300mm printing size to meet diverse printing requirements, support various 1.75mm printing filaments like PLA,ABS,TPU,Wood,Gradient Color,etc.(PLA Recommend).
  • Widely used in toy, architecture, furniture, education, medical, daily necessities and other fields.
Sintron 3d printer kossel mini New
Sintron 3d printer kossel mini New
Boobro for E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle
  • Applicability & compatibility: compatible with all 1.75mm for E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass extruder nozzles(1x0.3mm/1x0.4mm/1x0.5mm), and a v6 heating block, 2Pcs teflon tube within stainless steel nozzle throat
Sintron 3d printer kossel mini New
BIGTREETECH MMU2 DIP Filament PLA Select filament consumable port 5 colors Support TMC2209/TMC5160 Apply to prusa i3 MK3S/MK2.5S 3D Printer
  • 1. Firmware link: https://github.com/bigtreetech.
  • 2. Master chip:STM32F030C8T6.
  • 3. Used to select consumables port, Support up to 5 color printing and multiple driver models.
  • 4. Driver modes: TMC Driver-UART Mode / Driver-SPI Mode.
  • 5. 24-hour service: Don't worry about after-sales problems, please contact us if necessary, we will solve it for you.
Sintron 3d printer kossel mini New
Creality Upgraded Direct Extruder Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Comes with 42-40 Stepper Motor, 1.75mm Direct Drive Extruder, Fan and Cables Support Flexible Filament
  • Upgraded direct ectruder kit for Ender 3, Ender 3 Pro and Ender 3 V2 3D Printer.
  • Support all 1.75mm diameter filament in the market, offers more precise and smoother extrusion.
  • Perfect for PLA and optimize the performance of remote printing with TPU and other flexible filaments.
  • Comes with 42-40 stepper motor. This direct extruder kit is made of aluminum alloy and plastic, durable and wear resistant.
  • With longer Extruder motor connecting cable, tools, accessories and wiring diagram instruction for installation, easy to assemble.
Sintron 3d printer kossel mini New
Sintron 3d printer kossel mini New
Flashforge Adventurer 3 Lite 3D Printer,Disassemble Nozzle & Removable Platform,No Camera No Filament Detection (AD3 LITE)
  • Small Device Size:Small but compact structure,with no angular design,providing a 150*150*150mm build size.
  • Patented Removable Extruder Structure/No leveling Printing:Flashforge patented extruder structure,fully upgraded,steady filament loading,turbofan and air guide improve printing result.Ready-to-use and no leveling printing preventing any printing imprecisions due to imporper leveling
  • Removable &Heatable &Bendable Plate:Shape-memory material plate heats evenly,supports bending without deformation.Supports heating temperatur up to 100°C,supports ABS filament.Under 400-hour bending test,platform remains the same.Much easier to take down models,even big models.
  • Bult-in Filament Cartridge/Auto Filament Loading/Unloading Funcion:Printer will detect filalment and start loading automotically after filament has been inserted into the intake.
  • No built-in camera,no filament detection
Sintron 3d printer kossel mini New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
DISCOUNTSintron 3d printer kossel mini New
TENLOG Hands 2 Independent Dual Extruder 3D Printer,300 Degree High Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS,220x220x250mm
  • 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
  • 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
  • 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
  • 【Warranty and Assemble】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Sintron 3d printer kossel mini. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Sintron 3d printer kossel mini give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
DISCOUNT
TENLOG Hands 2 Independent Dual Extruder 3D Printer,300 Degree High Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS,220x220x250mm
  • 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
  • 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
  • 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
  • 【Warranty and Assemble】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
Flashforge Adventurer 3 Lite 3D Printer,Disassemble Nozzle & Removable Platform,No Camera No Filament Detection (AD3 LITE)
  • Small Device Size:Small but compact structure,with no angular design,providing a 150*150*150mm build size.
  • Patented Removable Extruder Structure/No leveling Printing:Flashforge patented extruder structure,fully upgraded,steady filament loading,turbofan and air guide improve printing result.Ready-to-use and no leveling printing preventing any printing imprecisions due to imporper leveling
  • Removable &Heatable &Bendable Plate:Shape-memory material plate heats evenly,supports bending without deformation.Supports heating temperatur up to 100°C,supports ABS filament.Under 400-hour bending test,platform remains the same.Much easier to take down models,even big models.
  • Bult-in Filament Cartridge/Auto Filament Loading/Unloading Funcion:Printer will detect filalment and start loading automotically after filament has been inserted into the intake.
  • No built-in camera,no filament detection

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Sintron 3d printer kossel mini actually costs.

DISCOUNTLatest Sintron 3d printer kossel mini
[Sintron] Kossel Mini Electronic Full Kit for DIY RepRap Rostock Delta 3D Printer with Bowden hotend+ MK8 Extruder + RAMPS 1.4 + LCD2004 + MEGA 2560 + A4988 + NEMA 17 Motor + Endstop + Round Aluminum MK3 heatbed + Filament
  • (1) We use well-designed Kossel MK8 extruder, high quality stepper motor and direct drive extrusion wheel, more accurate, quick heating and fluent injection, We have made necessary design, Printing speed up to 100mm/s.
  • (2) We use the latest MK3 Heatbed Round 3mm Aluminium PCB Board, dual power supply, operate at 12V or 24V. Heated bed keeps a certain temperature to prevent warping, and cooling fan speeds up solidification of the extruded filament. this would reduct your calibration time a lot !
  • (3) We offer LCD 2004 controller with SD card design support totally off-line print, no computer needed while printing. then you don't have to spare one computer for your 3D printer use only.
  • (4) We have pre-install the 3D printer firmware for you . so even you know nothing about firmware , you can still get it working .
  • (5) We don't just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can, please feel free to send us an email, we will also help you to complete the project !
Latest Sintron 3d printer kossel mini
Comgrow Creality 3D Ender 3 Pro 3D Printer with Cmagnet Build Plateform Surface 220x220x250mm Print Size
  • Upgrade Version: This is the upgrade version of Creality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size.
  • Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
  • Improved Mechanical Properties:The Ender 3 Pro has been redesigned with a more sturdy, 40×40 aluminum extrusion for the Y-axis base. This should improve the overall stability of the printing surface.
    Semi-assembled Kit: several assembled parts This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
  • WHAT CAN WE DO: As an authorised reseller of Creality 3D, we can offer 100% original products for you. And also can offer you professional customer service.
Latest Sintron 3d printer kossel mini
Creality Upgraded Direct Extruder Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Comes with 42-40 Stepper Motor, 1.75mm Direct Drive Extruder, Fan and Cables Support Flexible Filament
  • Upgraded direct ectruder kit for Ender 3, Ender 3 Pro and Ender 3 V2 3D Printer.
  • Support all 1.75mm diameter filament in the market, offers more precise and smoother extrusion.
  • Perfect for PLA and optimize the performance of remote printing with TPU and other flexible filaments.
  • Comes with 42-40 stepper motor. This direct extruder kit is made of aluminum alloy and plastic, durable and wear resistant.
  • With longer Extruder motor connecting cable, tools, accessories and wiring diagram instruction for installation, easy to assemble.
Latest Sintron 3d printer kossel mini
Redrex Upgraded Aluminum Bowden Extruder with 40 Teeth MK8 Drive Gear for Creality CR-10 Series and other Reprap Prusa 3D Printers
  • Bowden extrusion are supported:It comes with a nema stepper motor mount,works great on TEVO Tarantula i3,Anycubic Kossel i3 Mega,Flsun i3,MP Select and other bowden extrusion 3d printers as well.
  • Direct extrusion are supported:This upgrade parts can also work as MK8 extruder frame with some modifications
  • Recommend filament materials:PLA/ABS/Wood/TPU/PTEG,40 Teeth drive gear feeds the 1.75mm filament very smoothy.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Latest Sintron 3d printer kossel mini
ANYCUBIC Mega S 3D Printer, UltraBase Heated Build Plate + Upgrade Extruder Support 1.75mm PLA Filament, 8.27''(L) x8.27''(W) x8.07''(H) Print Size
  • Works Out Of the Box: 3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for expert users but also friendly use to beginners. The rigid metal frame can minimize the shaking to improve the print quality.
  • Upgraded Extruder Design: Taitan extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design compatible with most filaments, greatly reducing the clogging risk and improving printing accuracy.
  • Resume Print & Sesor Detection: Mega S 3D Printer can resume printing after power outage or any other unexpected stoppage.One click to resume from the last recorded position when suffering power outages. And the sensor pauses prints and sets off an alarm when you run out of filament which greatly saves time and cost , printing volume reaches 8.27 x 8.27 x 8.07 inches.
  • Anycubic Ultrabase: Patented 3D printer printing platform surface coated with patented microporous coating, with excellent adhesion when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print.
  • More Function: 1)TFT Touch Screen-As responsive as operating on the phone. 2)All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours professional customer service.
Latest Sintron 3d printer kossel mini
LABISTS 3D Printer with Touch Screen for PLA, ABS Filament, 220 x 220 x 250mm, Auto Leveling, Filament Run out Detection, Power Failure Resume Print,Fast Assembly and Fast Print
  • Higher Precision on Print: With a nozzle of 0.4mm, the LABISTS 3D printer can print higher precised model. With the hot bed, whose maximun temperature can arrive at 100 ℃, it can print without wrapping and bubble in the surface of the mode and can print with ABS and PLA filament
  • Automatic Leveling: The auto leveling 3d printer has leveling sensor, which is able to automatically adjust the distance between the glassbed and the nozzle in replace of adjusting it by your hand. Save your time in leveling and get more vivid printing quality
  • Resume Printing After Power Failure and Filament Runout: The 3D Printer can resume print from the position it stop when the power is off suddenly and when the filament is run out. Never need to worry about power failure and filament outages. No waste of filament and money
  • 2.8 Inch Full Color Touch Screen: With a 2.8 inch colorful touch screen, the 3D Printer is more simple and convenient to operate. Support automatic feeding and unloading function, easy to solve by feeding and refueling one button
  • Fast Assembly within Five Minutes: The 3D Printer comes with several assembled parts. And it only need Several Steps to connect it---connect the metal frame, the printer head and the drive belt, insert the cables, push the Bowden tube into the fitting and then the filament holder, easy to assemble in five minutes
Latest Sintron 3d printer kossel mini
SIMAX3D BMG Bowden extruder with two drives and 1.75 mm high-performance parts for CR10, Ender 3, Wanhao D9, Anet E10, Geeetech A10 and other DIY 3D printers
  • SIMAX3D dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy
  • Compared to other extruder, SIMAX3D BMG extruder uses double wheel to feed filament from two sides to make sure filament is evenly stressed and avoid filament slip.
  • Dual drive technology: It is easy to assemble and feed the filament smoothly and continuously without worrying about sanding or slipping under the most demanding conditions.
  • SIMAX3D BMG extruder is able to adjust the tightness with screw nut to fit with all 3D printing£¬filament solid &soft: PLA / ABS / PETG / TPU / NYLON / CARBON FIBER / WOOD
  • Suitable for most DIY 3D printers, such as Creality CR10, Ender 3 series, Wanhao D9, Anet E10, Geeetech A10 3D printer high-performance upgrade parts.
Latest Sintron 3d printer kossel mini
WINSINN 3D Printer Sensor Heater Block, Compatible with E3D V6 J-Head RepRap Bowden Hotend Extruder For HT-NTC100K PT100 - Aluminum (Pack of 5Pcs)
  • New V6 Sensor Heater Block - For HT-NTC100K PT100 sensor cartridge
  • Material: Aluminum alloy
  • For V6 nozzle (M6 Screw)
  • With Allen wrench, Easy to install
  • Made by WINSINN
DISCOUNTLatest Sintron 3d printer kossel mini
3D Printer Build Surface 220mm for Anet A8 for WanHao i3 Magnetic Anti-warping Detachable Square Black Eewolf (220x220)
  • A+B parts with magnetic detachable (Easier to take off models, anti-warping)
  • 3D Printer Build Surface: Please note the auto sensor could not detect the build surface directly.
  • Make it easier to adhere the filament to the heated bed when printing.
  • Compatible with Filament PLA, (not ABS, PETG)
  • Packing: 1* build surface included. 300g/pc

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Sintron 3d printer kossel mini could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Sintron 3d printer kossel mini which are among the cheapest on the market. Just scroll through the list to find Sintron 3d printer kossel mini the cheapest products.

Catalog

The product Sintron 3d printer kossel mini can be found in the dedicated catalog where the entire list of products on sale is presented.

Sintron 3d printer kossel mini is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Sintron 3d printer kossel mini New
GMZS 3D Printer - DIY Logo Engraver, 220 * 220 * 300Mm Build Volume with Upgrade Silent Motherboard PTFE Tubing Extruder
  • Imported blue PTFE Tube; Metal extruding unit, stable feeding and wear-resisting; 45°display screen, user-friendly design for easy usage; Double Y-axis control system with synchronous operation and stable output to avoid vibrations resulting from long-time printing.
  • Resume printing function, when the power is restored, the printer will continue to print from the interruption point. Large adjusting nuts, easy and fast leveling.
  • High standard V-Groove profile and pulley for running stably and smoothly, low noise and good wear resistant. Adopting soft magnetic self-adhesive platform, remove the model easier and excellent adhesion.
  • 220*220*300mm printing size to meet diverse printing requirements, support various 1.75mm printing filaments like PLA,ABS,TPU,Wood,Gradient Color,etc.(PLA Recommend).
  • Widely used in toy, architecture, furniture, education, medical, daily necessities and other fields.
Sintron 3d printer kossel mini New
Sintron 3d printer kossel mini New
Boobro for E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle
  • Applicability & compatibility: compatible with all 1.75mm for E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass extruder nozzles(1x0.3mm/1x0.4mm/1x0.5mm), and a v6 heating block, 2Pcs teflon tube within stainless steel nozzle throat
Sintron 3d printer kossel mini New
BIGTREETECH MMU2 DIP Filament PLA Select filament consumable port 5 colors Support TMC2209/TMC5160 Apply to prusa i3 MK3S/MK2.5S 3D Printer
  • 1. Firmware link: https://github.com/bigtreetech.
  • 2. Master chip:STM32F030C8T6.
  • 3. Used to select consumables port, Support up to 5 color printing and multiple driver models.
  • 4. Driver modes: TMC Driver-UART Mode / Driver-SPI Mode.
  • 5. 24-hour service: Don't worry about after-sales problems, please contact us if necessary, we will solve it for you.
Sintron 3d printer kossel mini New
Creality Upgraded Direct Extruder Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Comes with 42-40 Stepper Motor, 1.75mm Direct Drive Extruder, Fan and Cables Support Flexible Filament
  • Upgraded direct ectruder kit for Ender 3, Ender 3 Pro and Ender 3 V2 3D Printer.
  • Support all 1.75mm diameter filament in the market, offers more precise and smoother extrusion.
  • Perfect for PLA and optimize the performance of remote printing with TPU and other flexible filaments.
  • Comes with 42-40 stepper motor. This direct extruder kit is made of aluminum alloy and plastic, durable and wear resistant.
  • With longer Extruder motor connecting cable, tools, accessories and wiring diagram instruction for installation, easy to assemble.
Sintron 3d printer kossel mini New
Sintron 3d printer kossel mini New
Flashforge Adventurer 3 Lite 3D Printer,Disassemble Nozzle & Removable Platform,No Camera No Filament Detection (AD3 LITE)
  • Small Device Size:Small but compact structure,with no angular design,providing a 150*150*150mm build size.
  • Patented Removable Extruder Structure/No leveling Printing:Flashforge patented extruder structure,fully upgraded,steady filament loading,turbofan and air guide improve printing result.Ready-to-use and no leveling printing preventing any printing imprecisions due to imporper leveling
  • Removable &Heatable &Bendable Plate:Shape-memory material plate heats evenly,supports bending without deformation.Supports heating temperatur up to 100°C,supports ABS filament.Under 400-hour bending test,platform remains the same.Much easier to take down models,even big models.
  • Bult-in Filament Cartridge/Auto Filament Loading/Unloading Funcion:Printer will detect filalment and start loading automotically after filament has been inserted into the intake.
  • No built-in camera,no filament detection
Sintron 3d printer kossel mini New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
DISCOUNTSintron 3d printer kossel mini New
TENLOG Hands 2 Independent Dual Extruder 3D Printer,300 Degree High Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS,220x220x250mm
  • 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
  • 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
  • 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
  • 【Warranty and Assemble】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!

Where to buy?

If you are asking yourself where to buy Sintron 3d printer kossel mini? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Sintron 3d printer kossel mini, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Sintron 3d printer kossel mini and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Sintron 3d printer kossel mini may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Sintron 3d printer kossel mini used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Sintron 3d printer kossel mini at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
DISCOUNT
TENLOG Hands 2 Independent Dual Extruder 3D Printer,300 Degree High Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS,220x220x250mm
  • 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
  • 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
  • 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
  • 【Warranty and Assemble】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
Flashforge Adventurer 3 Lite 3D Printer,Disassemble Nozzle & Removable Platform,No Camera No Filament Detection (AD3 LITE)
  • Small Device Size:Small but compact structure,with no angular design,providing a 150*150*150mm build size.
  • Patented Removable Extruder Structure/No leveling Printing:Flashforge patented extruder structure,fully upgraded,steady filament loading,turbofan and air guide improve printing result.Ready-to-use and no leveling printing preventing any printing imprecisions due to imporper leveling
  • Removable &Heatable &Bendable Plate:Shape-memory material plate heats evenly,supports bending without deformation.Supports heating temperatur up to 100°C,supports ABS filament.Under 400-hour bending test,platform remains the same.Much easier to take down models,even big models.
  • Bult-in Filament Cartridge/Auto Filament Loading/Unloading Funcion:Printer will detect filalment and start loading automotically after filament has been inserted into the intake.
  • No built-in camera,no filament detection

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Sintron 3d printer kossel mini.

Rating: 3.67 of 5 - 21 votes
1 Star2 Stars3 Stars4 Stars5 Stars (21 votes, average: 3.67 out of 5)
Loading...