Self leveling 3d printer Reviews and Best Deals

Online product reviews and comparisons for Self leveling 3d printer.

Latest Self leveling 3d printer
Comgrow BL Touch Version 3.1 Auto-Leveling for Creality 3D Printer Ender 3 / Ender 3 Pro/Emder-5
  • BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • BLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensor. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release & Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.
  • Self-test : The push pin operate two times in a test when the power is on.
  • Alarm : The LED light blinks if a problem was found on a self-test or during operation.
  • Wiring defect indicator : Blue and Red LED for indicating wiring defects.
DISCOUNTLatest Self leveling 3d printer
DC 6-36V Auto Leveling Sensor, Green SN04-N Auto Self-Leveling Heatbed Position Adjustment Inductive Proximity Sensor, Auto Leveling Sensor for DIY 3D Printer (1 Pieces)
  • Premium Quality Material: This DC 6-36V Auto Leveling Sensor adopts of 100 new brand, premium quality material, it is made of ABS plastic shell to ensure a long time use and excellent performance
  • Widely Use: This 3 Wires NPN Sensor is widely in the machine tool industry, frequency counters and other automatic control system, for example, you can use it for DIY 3D Printer
  • Excellent Design: This Auto Leveling Position Sensor is designed with DC 3 Wire NPN Type (Brown, Black, Blue), and a 6-36V DC working voltage, LED indicator light, angular column type for various of conditions
  • Excellent Performance: This sensor has a power supply inverted connecting protection, short circuit protection, and non-contact detecting device to create an excellent performance for you.
  • Easy to Use: This DC 6-36V Auto Leveling Sensor is designed with a 1.2 meter cable,which helps reduce it's using limitation, at the same time, the appearance switch is also very helpful, andthe detect distance of the sensor is 5mm, so when proximity switch is close to some target object, it will send out control signal to you, very convenient and easy to use
Latest Self leveling 3d printer
DC 6-36V Auto Leveling Sensor Blue SN04-N Auto Self-Leveling Heatbed Position Adjustment Inductive Proximity Sensor with Screws for 3D Printer Anet A8 RepRap Prusa DIY i3
  • The DC 6-36V Auto Leveling Sensor adopts premium quality material, it is made of ABS plastic shell to ensure a long time use and excellent performance.
  • The Auto Leveling Position Sensor is designed with DC 3 Wire NPN Type (Brown, Black, Blue), and a 10-30V DC working voltage, output NPN.NO, LED indicator light, angular column type for various of conditions.
  • The 3 Wires NPN Sensor is widely used in the machine tool industry, frequency counters and other automatic control system, for example, you can use it for DIY 3D Printer.
  • The sensor has a power supply inverted connecting protection, short circuit protection, and non-contact detecting device to create an excellent performance for you.
  • This DC 6-36V Auto Leveling Sensor is designed with a 1.15 meter cable, which helps reduce it's using limitation. At the same time, the appearance switch is also very helpful, andthe detect distance of the sensor is 4mm, so when proximity switch is close to some target object, it will send out control signal to you, very convenient and easy to use.
Latest Self leveling 3d printer
Auto Creality BLTouch Bed Self-Leveling Sensor Fit for CR-10 for ENDER 3 3D Printer Kit
  • Suitable for CR-10 for Ender-3 3D Printer.
  • Made of composite material, durable and long life.
  • Auto self-leveling bed sensor, easy to use.
  • Brand new. Simple to install.
  • Perfect 3D printer accessories, professional parts.
Latest Self leveling 3d printer
H HILABEE Black Auto Auto Self-Leveling Position Sensor For Anet A8 3D Printer Parts
  • Works well with Anet A8 3D printer.
  • Pretty solution for auto-adjusting heatbed level, convenient for use.
  • 3D printer waterproof anti-jamming DC three-wire npn,10-30V DC working voltage.
  • Anti-jamming three-wire, 140cm / 55.1in cable length.
  • Comes with mounting plate and pre soldered connector so no wiring is needed, just unplug the z stop and plug in sensor and screw into the back of printer.
Latest Self leveling 3d printer
Latest Self leveling 3d printer
Latest Self leveling 3d printer
Latest Self leveling 3d printer

Buy Self leveling 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Self leveling 3d printer, buy Self leveling 3d printer directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Self leveling 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


DISCOUNTBest
DC 6-36V Auto Leveling Sensor, Green SN04-N Auto Self-Leveling Heatbed Position Adjustment Inductive Proximity Sensor, Auto Leveling Sensor for DIY 3D Printer (1 Pieces)
  • Premium Quality Material: This DC 6-36V Auto Leveling Sensor adopts of 100 new brand, premium quality material, it is made of ABS plastic shell to ensure a long time use and excellent performance
  • Widely Use: This 3 Wires NPN Sensor is widely in the machine tool industry, frequency counters and other automatic control system, for example, you can use it for DIY 3D Printer
  • Excellent Design: This Auto Leveling Position Sensor is designed with DC 3 Wire NPN Type (Brown, Black, Blue), and a 6-36V DC working voltage, LED indicator light, angular column type for various of conditions
  • Excellent Performance: This sensor has a power supply inverted connecting protection, short circuit protection, and non-contact detecting device to create an excellent performance for you.
  • Easy to Use: This DC 6-36V Auto Leveling Sensor is designed with a 1.2 meter cable,which helps reduce it's using limitation, at the same time, the appearance switch is also very helpful, andthe detect distance of the sensor is 5mm, so when proximity switch is close to some target object, it will send out control signal to you, very convenient and easy to use
Best
Comgrow BL Touch Version 3.1 Auto-Leveling for Creality 3D Printer Ender 3 / Ender 3 Pro/Emder-5
  • BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • BLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensor. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release & Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.
  • Self-test : The push pin operate two times in a test when the power is on.
  • Alarm : The LED light blinks if a problem was found on a self-test or during operation.
  • Wiring defect indicator : Blue and Red LED for indicating wiring defects.
Best
DC 6-36V Auto Leveling Sensor Blue SN04-N Auto Self-Leveling Heatbed Position Adjustment Inductive Proximity Sensor with Screws for 3D Printer Anet A8 RepRap Prusa DIY i3
  • The DC 6-36V Auto Leveling Sensor adopts premium quality material, it is made of ABS plastic shell to ensure a long time use and excellent performance.
  • The Auto Leveling Position Sensor is designed with DC 3 Wire NPN Type (Brown, Black, Blue), and a 10-30V DC working voltage, output NPN.NO, LED indicator light, angular column type for various of conditions.
  • The 3 Wires NPN Sensor is widely used in the machine tool industry, frequency counters and other automatic control system, for example, you can use it for DIY 3D Printer.
  • The sensor has a power supply inverted connecting protection, short circuit protection, and non-contact detecting device to create an excellent performance for you.
  • This DC 6-36V Auto Leveling Sensor is designed with a 1.15 meter cable, which helps reduce it's using limitation. At the same time, the appearance switch is also very helpful, andthe detect distance of the sensor is 4mm, so when proximity switch is close to some target object, it will send out control signal to you, very convenient and easy to use.
Best
Auto Creality BLTouch Bed Self-Leveling Sensor Fit for CR-10 for ENDER 3 3D Printer Kit
  • Suitable for CR-10 for Ender-3 3D Printer.
  • Made of composite material, durable and long life.
  • Auto self-leveling bed sensor, easy to use.
  • Brand new. Simple to install.
  • Perfect 3D printer accessories, professional parts.
Best
H HILABEE Black Auto Auto Self-Leveling Position Sensor For Anet A8 3D Printer Parts
  • Works well with Anet A8 3D printer.
  • Pretty solution for auto-adjusting heatbed level, convenient for use.
  • 3D printer waterproof anti-jamming DC three-wire npn,10-30V DC working voltage.
  • Anti-jamming three-wire, 140cm / 55.1in cable length.
  • Comes with mounting plate and pre soldered connector so no wiring is needed, just unplug the z stop and plug in sensor and screw into the back of printer.

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Self leveling 3d printer

Here is the ranking of the best Self leveling 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Self leveling 3d printer and read the reviews left by real customers, see the Self leveling 3d printer ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Self leveling 3d printer New
Yaootely 1 Set 3D Touch Auto Bed Leveling Sensor Touch 3D Touch Sensor For Anet A8 3D Printer
  • 3D Touches is an auto leveling sensor for 3D Printers that can precisely measure the tilt of your print surface. It can greatly improve the printing precision of your 3D Printer.
  • 3D Touches The main functions and controls of 3DTouches are the same as most auto bed leveling sensors, which consists of a RC servo and a -switch, thus, 3DTouches can be used on almost every 3D printer control board.
  • By using progressively designed solenoid and hall sensor, 3DTouches can integrate high precision in such a simple structure. To make it more user-friendly and to bring you more enjoyable printing experience we add many smart functions such as self-test, false alarm, alarm release and test mode for M119.
  • wide Selection of Bed: Does not uses either optical, nor proximity (inductive/capacitive) sensor. It is controlled by Hall Effect, providing high precision. Thus the bed material can be selected freely.
  • Optimized structure: Larger Build Size: It is a small and technology-intensive one. Build size can be set larger than other existing auto bed leveling sensor. Uses existing RC Servo motor signal intactly, so just plug on the same pins after removing servo motor.
Self leveling 3d printer New
ZANYUYU For Reprap Prusa i3 MK3 PINDA V2 Self-leveling Sensor Probe Compatible with Prusa i3 MK3 3D printer parts
  • For prusa i3 mk3 3D Printer
  • Quantity: 1 pc
  • If you have any questions about the product, you can send an email to us and we will answer it for you.
Self leveling 3d printer New
Printer BLTouch, High Efficiency BLTouch, Metal Glass Bed Material for Leveling
  • Adopt automatic leveling function, more convenient to use, improve the success rate of shaping.
  • Compact size, easy to install on 3D printer. Makes it easier to level off a hot bed.
  • Can be used with any kind of bed material, such as glass, wood, metal, etc.
  • Strong compatibility, intelligent self ‑ check, easy and convenient to apply to printer.
  • An auto‑leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface.
Self leveling 3d printer New
Printer BLTouch, Compact Size Widely Used Aluminum Strong Compatibility BLTouch, Glass Metal Bed Material for Leveling
  • An auto‑leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface.
  • Can be used with any kind of bed material, such as glass, wood, metal, etc.
  • Strong compatibility, intelligent self ‑ check, easy and convenient to apply to printer.
  • Compact size, easy to install on 3D printer. Makes it easier to level off a hot bed.
  • Adopt automatic leveling function, more convenient to use, improve the success rate of shaping.
Self leveling 3d printer New
SHENLIJUAN Good Tube 3D Printers parts Good Remote Spray Nozzle Feed Tape Tube PTFE Tube Cr10 Ender 3
  • Urface bright, highgloss, ceramic texture.
  • - Excellent corrosion resistance - Ability to withstand the effects of all strong acids (including aqua regia) strong oxidants, reducing agents and various organic solvents other than molten alkali metal, fluorinated media and above 300 ° C sodium hydroxide.
  • - The Strong resistance to insulation --- not affected by the environment and frequency, volume resistance up to 1018 ohms, dielectric loss is small, wear high voltage.
  • - Excellent resistance to high and low temperature --- the impact of little change in temperature, temperature range, can use the temperature -190 ° and +260 °.
  • - Unique self-lubricating --- with the smallest friction coefficient in plastic, is the ideal oil-free material.
Self leveling 3d printer New
SHENLIJUAN Auto Leveling Heated Bed Sensor for 3D Printer Auto Self-Leveling Heatbed Position Adjustment Sensor
  • Urface bright, highgloss, ceramic texture.
  • Automatic matrix mesh leveling.
  • Features an inductive proximity sensor, to automatically detect the bed and assist in reading a matrix of points across the bed for bed leveling.
  • Possibility of setting/adjusting Live Z Offset as you print.
  • Automatic leveling sensor only, other accessories demo in the picture is not included!
Self leveling 3d printer New
SHENLIJUAN Auto Self-Leveling Heatbed Position Adjustment Inductive Proximity Sensor With Mounting Plate Screws for A8
  • Urface bright, highgloss, ceramic texture.
  • Works well with A8 3D printer.
  • Pretty solution for auto-adjusting heatbed level. 10-30V DC working voltage, output NPN.NO.
  • Comes with mounting plate & screws, pre-soldered connector.
  • Anti-jamming three-wire, 140cm / 55.1in cable length.
Self leveling 3d printer New
SHENLIJUAN V1.7 Control Board Mainboard DIY Self Assembly 3D Mother Board for A8 Desktop Printer Kit
  • Urface bright, highgloss, ceramic texture.
  • 1. The highly integrated integrated board solves the problem that the Ramps1.4 combination interface is cumbersome and easy to malfunction.
  • 2. Optimized layout and heat dissipation design make the whole board performance more stable.
  • 3, support automatic leveling proximity probe, customers can debug and add automatic leveling.
  • 4, large USB, more stable connection, simpler interface, more convenient wiring, more stable work and longer life.
Self leveling 3d printer New
XBaofu 1set For Prusa I3 Mk3 3d Printer Hotend Electronics Parts, Thermistor, 24v 40w Cartridge, Filament Sensor, For Pinda V2, Left And For Noctua Fan
  • Item Type: Cartridge Heater
  • Item Type: Auto Self-Leveling Sensor
  • Package:1pc* Noctua fan+1pc*cooling fan+1pc* 24v 40w cartridge+1pc* hotend thermistor+1pc* filament sensor(with cable)+1pc* PINDA V2 probe

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Self leveling 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Self leveling 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

ZANYUYU For Reprap Prusa i3 MK3 PINDA V2 Self-leveling Sensor Probe Compatible with Prusa i3 MK3 3D printer parts
  • For prusa i3 mk3 3D Printer
  • Quantity: 1 pc
  • If you have any questions about the product, you can send an email to us and we will answer it for you.
Yaootely 1 Set 3D Touch Auto Bed Leveling Sensor Touch 3D Touch Sensor For Anet A8 3D Printer
  • 3D Touches is an auto leveling sensor for 3D Printers that can precisely measure the tilt of your print surface. It can greatly improve the printing precision of your 3D Printer.
  • 3D Touches The main functions and controls of 3DTouches are the same as most auto bed leveling sensors, which consists of a RC servo and a -switch, thus, 3DTouches can be used on almost every 3D printer control board.
  • By using progressively designed solenoid and hall sensor, 3DTouches can integrate high precision in such a simple structure. To make it more user-friendly and to bring you more enjoyable printing experience we add many smart functions such as self-test, false alarm, alarm release and test mode for M119.
  • wide Selection of Bed: Does not uses either optical, nor proximity (inductive/capacitive) sensor. It is controlled by Hall Effect, providing high precision. Thus the bed material can be selected freely.
  • Optimized structure: Larger Build Size: It is a small and technology-intensive one. Build size can be set larger than other existing auto bed leveling sensor. Uses existing RC Servo motor signal intactly, so just plug on the same pins after removing servo motor.
SHENLIJUAN Good Tube 3D Printers parts Good Remote Spray Nozzle Feed Tape Tube PTFE Tube Cr10 Ender 3
  • Urface bright, highgloss, ceramic texture.
  • - Excellent corrosion resistance - Ability to withstand the effects of all strong acids (including aqua regia) strong oxidants, reducing agents and various organic solvents other than molten alkali metal, fluorinated media and above 300 ° C sodium hydroxide.
  • - The Strong resistance to insulation --- not affected by the environment and frequency, volume resistance up to 1018 ohms, dielectric loss is small, wear high voltage.
  • - Excellent resistance to high and low temperature --- the impact of little change in temperature, temperature range, can use the temperature -190 ° and +260 °.
  • - Unique self-lubricating --- with the smallest friction coefficient in plastic, is the ideal oil-free material.
SHENLIJUAN Auto Self-Leveling Heatbed Position Adjustment Inductive Proximity Sensor With Mounting Plate Screws for A8
  • Urface bright, highgloss, ceramic texture.
  • Works well with A8 3D printer.
  • Pretty solution for auto-adjusting heatbed level. 10-30V DC working voltage, output NPN.NO.
  • Comes with mounting plate & screws, pre-soldered connector.
  • Anti-jamming three-wire, 140cm / 55.1in cable length.
SHENLIJUAN V1.7 Control Board Mainboard DIY Self Assembly 3D Mother Board for A8 Desktop Printer Kit
  • Urface bright, highgloss, ceramic texture.
  • 1. The highly integrated integrated board solves the problem that the Ramps1.4 combination interface is cumbersome and easy to malfunction.
  • 2. Optimized layout and heat dissipation design make the whole board performance more stable.
  • 3, support automatic leveling proximity probe, customers can debug and add automatic leveling.
  • 4, large USB, more stable connection, simpler interface, more convenient wiring, more stable work and longer life.

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Self leveling 3d printer actually costs.

Latest Self leveling 3d printer
Comgrow BL Touch Version 3.1 Auto-Leveling for Creality 3D Printer Ender 3 / Ender 3 Pro/Emder-5
  • BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • BLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensor. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release & Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.
  • Self-test : The push pin operate two times in a test when the power is on.
  • Alarm : The LED light blinks if a problem was found on a self-test or during operation.
  • Wiring defect indicator : Blue and Red LED for indicating wiring defects.
DISCOUNTLatest Self leveling 3d printer
DC 6-36V Auto Leveling Sensor, Green SN04-N Auto Self-Leveling Heatbed Position Adjustment Inductive Proximity Sensor, Auto Leveling Sensor for DIY 3D Printer (1 Pieces)
  • Premium Quality Material: This DC 6-36V Auto Leveling Sensor adopts of 100 new brand, premium quality material, it is made of ABS plastic shell to ensure a long time use and excellent performance
  • Widely Use: This 3 Wires NPN Sensor is widely in the machine tool industry, frequency counters and other automatic control system, for example, you can use it for DIY 3D Printer
  • Excellent Design: This Auto Leveling Position Sensor is designed with DC 3 Wire NPN Type (Brown, Black, Blue), and a 6-36V DC working voltage, LED indicator light, angular column type for various of conditions
  • Excellent Performance: This sensor has a power supply inverted connecting protection, short circuit protection, and non-contact detecting device to create an excellent performance for you.
  • Easy to Use: This DC 6-36V Auto Leveling Sensor is designed with a 1.2 meter cable,which helps reduce it's using limitation, at the same time, the appearance switch is also very helpful, andthe detect distance of the sensor is 5mm, so when proximity switch is close to some target object, it will send out control signal to you, very convenient and easy to use
Latest Self leveling 3d printer
DC 6-36V Auto Leveling Sensor Blue SN04-N Auto Self-Leveling Heatbed Position Adjustment Inductive Proximity Sensor with Screws for 3D Printer Anet A8 RepRap Prusa DIY i3
  • The DC 6-36V Auto Leveling Sensor adopts premium quality material, it is made of ABS plastic shell to ensure a long time use and excellent performance.
  • The Auto Leveling Position Sensor is designed with DC 3 Wire NPN Type (Brown, Black, Blue), and a 10-30V DC working voltage, output NPN.NO, LED indicator light, angular column type for various of conditions.
  • The 3 Wires NPN Sensor is widely used in the machine tool industry, frequency counters and other automatic control system, for example, you can use it for DIY 3D Printer.
  • The sensor has a power supply inverted connecting protection, short circuit protection, and non-contact detecting device to create an excellent performance for you.
  • This DC 6-36V Auto Leveling Sensor is designed with a 1.15 meter cable, which helps reduce it's using limitation. At the same time, the appearance switch is also very helpful, andthe detect distance of the sensor is 4mm, so when proximity switch is close to some target object, it will send out control signal to you, very convenient and easy to use.
Latest Self leveling 3d printer
Auto Creality BLTouch Bed Self-Leveling Sensor Fit for CR-10 for ENDER 3 3D Printer Kit
  • Suitable for CR-10 for Ender-3 3D Printer.
  • Made of composite material, durable and long life.
  • Auto self-leveling bed sensor, easy to use.
  • Brand new. Simple to install.
  • Perfect 3D printer accessories, professional parts.
Latest Self leveling 3d printer
H HILABEE Black Auto Auto Self-Leveling Position Sensor For Anet A8 3D Printer Parts
  • Works well with Anet A8 3D printer.
  • Pretty solution for auto-adjusting heatbed level, convenient for use.
  • 3D printer waterproof anti-jamming DC three-wire npn,10-30V DC working voltage.
  • Anti-jamming three-wire, 140cm / 55.1in cable length.
  • Comes with mounting plate and pre soldered connector so no wiring is needed, just unplug the z stop and plug in sensor and screw into the back of printer.
Latest Self leveling 3d printer
Latest Self leveling 3d printer
Latest Self leveling 3d printer
Latest Self leveling 3d printer

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Self leveling 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Self leveling 3d printer which are among the cheapest on the market. Just scroll through the list to find Self leveling 3d printer the cheapest products.

Catalog

The product Self leveling 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.

Self leveling 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Self leveling 3d printer New
Yaootely 1 Set 3D Touch Auto Bed Leveling Sensor Touch 3D Touch Sensor For Anet A8 3D Printer
  • 3D Touches is an auto leveling sensor for 3D Printers that can precisely measure the tilt of your print surface. It can greatly improve the printing precision of your 3D Printer.
  • 3D Touches The main functions and controls of 3DTouches are the same as most auto bed leveling sensors, which consists of a RC servo and a -switch, thus, 3DTouches can be used on almost every 3D printer control board.
  • By using progressively designed solenoid and hall sensor, 3DTouches can integrate high precision in such a simple structure. To make it more user-friendly and to bring you more enjoyable printing experience we add many smart functions such as self-test, false alarm, alarm release and test mode for M119.
  • wide Selection of Bed: Does not uses either optical, nor proximity (inductive/capacitive) sensor. It is controlled by Hall Effect, providing high precision. Thus the bed material can be selected freely.
  • Optimized structure: Larger Build Size: It is a small and technology-intensive one. Build size can be set larger than other existing auto bed leveling sensor. Uses existing RC Servo motor signal intactly, so just plug on the same pins after removing servo motor.
Self leveling 3d printer New
ZANYUYU For Reprap Prusa i3 MK3 PINDA V2 Self-leveling Sensor Probe Compatible with Prusa i3 MK3 3D printer parts
  • For prusa i3 mk3 3D Printer
  • Quantity: 1 pc
  • If you have any questions about the product, you can send an email to us and we will answer it for you.
Self leveling 3d printer New
Printer BLTouch, High Efficiency BLTouch, Metal Glass Bed Material for Leveling
  • Adopt automatic leveling function, more convenient to use, improve the success rate of shaping.
  • Compact size, easy to install on 3D printer. Makes it easier to level off a hot bed.
  • Can be used with any kind of bed material, such as glass, wood, metal, etc.
  • Strong compatibility, intelligent self ‑ check, easy and convenient to apply to printer.
  • An auto‑leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface.
Self leveling 3d printer New
Printer BLTouch, Compact Size Widely Used Aluminum Strong Compatibility BLTouch, Glass Metal Bed Material for Leveling
  • An auto‑leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface.
  • Can be used with any kind of bed material, such as glass, wood, metal, etc.
  • Strong compatibility, intelligent self ‑ check, easy and convenient to apply to printer.
  • Compact size, easy to install on 3D printer. Makes it easier to level off a hot bed.
  • Adopt automatic leveling function, more convenient to use, improve the success rate of shaping.
Self leveling 3d printer New
SHENLIJUAN Good Tube 3D Printers parts Good Remote Spray Nozzle Feed Tape Tube PTFE Tube Cr10 Ender 3
  • Urface bright, highgloss, ceramic texture.
  • - Excellent corrosion resistance - Ability to withstand the effects of all strong acids (including aqua regia) strong oxidants, reducing agents and various organic solvents other than molten alkali metal, fluorinated media and above 300 ° C sodium hydroxide.
  • - The Strong resistance to insulation --- not affected by the environment and frequency, volume resistance up to 1018 ohms, dielectric loss is small, wear high voltage.
  • - Excellent resistance to high and low temperature --- the impact of little change in temperature, temperature range, can use the temperature -190 ° and +260 °.
  • - Unique self-lubricating --- with the smallest friction coefficient in plastic, is the ideal oil-free material.
Self leveling 3d printer New
SHENLIJUAN Auto Leveling Heated Bed Sensor for 3D Printer Auto Self-Leveling Heatbed Position Adjustment Sensor
  • Urface bright, highgloss, ceramic texture.
  • Automatic matrix mesh leveling.
  • Features an inductive proximity sensor, to automatically detect the bed and assist in reading a matrix of points across the bed for bed leveling.
  • Possibility of setting/adjusting Live Z Offset as you print.
  • Automatic leveling sensor only, other accessories demo in the picture is not included!
Self leveling 3d printer New
SHENLIJUAN Auto Self-Leveling Heatbed Position Adjustment Inductive Proximity Sensor With Mounting Plate Screws for A8
  • Urface bright, highgloss, ceramic texture.
  • Works well with A8 3D printer.
  • Pretty solution for auto-adjusting heatbed level. 10-30V DC working voltage, output NPN.NO.
  • Comes with mounting plate & screws, pre-soldered connector.
  • Anti-jamming three-wire, 140cm / 55.1in cable length.
Self leveling 3d printer New
SHENLIJUAN V1.7 Control Board Mainboard DIY Self Assembly 3D Mother Board for A8 Desktop Printer Kit
  • Urface bright, highgloss, ceramic texture.
  • 1. The highly integrated integrated board solves the problem that the Ramps1.4 combination interface is cumbersome and easy to malfunction.
  • 2. Optimized layout and heat dissipation design make the whole board performance more stable.
  • 3, support automatic leveling proximity probe, customers can debug and add automatic leveling.
  • 4, large USB, more stable connection, simpler interface, more convenient wiring, more stable work and longer life.
Self leveling 3d printer New
XBaofu 1set For Prusa I3 Mk3 3d Printer Hotend Electronics Parts, Thermistor, 24v 40w Cartridge, Filament Sensor, For Pinda V2, Left And For Noctua Fan
  • Item Type: Cartridge Heater
  • Item Type: Auto Self-Leveling Sensor
  • Package:1pc* Noctua fan+1pc*cooling fan+1pc* 24v 40w cartridge+1pc* hotend thermistor+1pc* filament sensor(with cable)+1pc* PINDA V2 probe

Where to buy?

If you are asking yourself where to buy Self leveling 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Self leveling 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Self leveling 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Self leveling 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Self leveling 3d printer used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Self leveling 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

ZANYUYU For Reprap Prusa i3 MK3 PINDA V2 Self-leveling Sensor Probe Compatible with Prusa i3 MK3 3D printer parts
  • For prusa i3 mk3 3D Printer
  • Quantity: 1 pc
  • If you have any questions about the product, you can send an email to us and we will answer it for you.
Yaootely 1 Set 3D Touch Auto Bed Leveling Sensor Touch 3D Touch Sensor For Anet A8 3D Printer
  • 3D Touches is an auto leveling sensor for 3D Printers that can precisely measure the tilt of your print surface. It can greatly improve the printing precision of your 3D Printer.
  • 3D Touches The main functions and controls of 3DTouches are the same as most auto bed leveling sensors, which consists of a RC servo and a -switch, thus, 3DTouches can be used on almost every 3D printer control board.
  • By using progressively designed solenoid and hall sensor, 3DTouches can integrate high precision in such a simple structure. To make it more user-friendly and to bring you more enjoyable printing experience we add many smart functions such as self-test, false alarm, alarm release and test mode for M119.
  • wide Selection of Bed: Does not uses either optical, nor proximity (inductive/capacitive) sensor. It is controlled by Hall Effect, providing high precision. Thus the bed material can be selected freely.
  • Optimized structure: Larger Build Size: It is a small and technology-intensive one. Build size can be set larger than other existing auto bed leveling sensor. Uses existing RC Servo motor signal intactly, so just plug on the same pins after removing servo motor.
SHENLIJUAN Good Tube 3D Printers parts Good Remote Spray Nozzle Feed Tape Tube PTFE Tube Cr10 Ender 3
  • Urface bright, highgloss, ceramic texture.
  • - Excellent corrosion resistance - Ability to withstand the effects of all strong acids (including aqua regia) strong oxidants, reducing agents and various organic solvents other than molten alkali metal, fluorinated media and above 300 ° C sodium hydroxide.
  • - The Strong resistance to insulation --- not affected by the environment and frequency, volume resistance up to 1018 ohms, dielectric loss is small, wear high voltage.
  • - Excellent resistance to high and low temperature --- the impact of little change in temperature, temperature range, can use the temperature -190 ° and +260 °.
  • - Unique self-lubricating --- with the smallest friction coefficient in plastic, is the ideal oil-free material.
SHENLIJUAN Auto Self-Leveling Heatbed Position Adjustment Inductive Proximity Sensor With Mounting Plate Screws for A8
  • Urface bright, highgloss, ceramic texture.
  • Works well with A8 3D printer.
  • Pretty solution for auto-adjusting heatbed level. 10-30V DC working voltage, output NPN.NO.
  • Comes with mounting plate & screws, pre-soldered connector.
  • Anti-jamming three-wire, 140cm / 55.1in cable length.
SHENLIJUAN V1.7 Control Board Mainboard DIY Self Assembly 3D Mother Board for A8 Desktop Printer Kit
  • Urface bright, highgloss, ceramic texture.
  • 1. The highly integrated integrated board solves the problem that the Ramps1.4 combination interface is cumbersome and easy to malfunction.
  • 2. Optimized layout and heat dissipation design make the whole board performance more stable.
  • 3, support automatic leveling proximity probe, customers can debug and add automatic leveling.
  • 4, large USB, more stable connection, simpler interface, more convenient wiring, more stable work and longer life.

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Self leveling 3d printer.

Rating: 3.38 of 5 - 37 votes
1 Star2 Stars3 Stars4 Stars5 Stars (37 votes, average: 3.38 out of 5)
Loading...