Self leveling 3d printer bed Reviews and Best Deals

Online product reviews and comparisons for Self leveling 3d printer bed.

Latest Self leveling 3d printer bed
Eryone 3D Printer ER-20, Auto-leveling Bed Sensor, Super Quiet 3D Printer with Powerful 32Bit Motherboard, Size 250 * 220 * 200mm
  • Easy to Use: Auto-bed leveling gives you the perfect first layer and the ink coating glass makes you stick and remove printed objects easily.

  • Silent: TMC2209 offers whisper quiet and more accurate printing without the need of mechanical limit switch (sensorless).

  • Simplicity: Modular design, built-in power supply, auto bed leveling sensor, no bed adjust knob, plug and play. ER20‘s sleek & streamlined round corners comply with the ergonomic design.

  • Reliable: ER20 supplies resume printing, sparing you the unexpected head-scratching outage. Fully upgraded aluminum profile frame provides durability. The reliable extruder is mounted with an Eryone sensor for hassle-free printing.

  • Power failure resume feature: Built-in supercapacitor and circuit designing, the mainboard will store the height value of Z-axis when the power off. When the power system resume, the printer can resume the print

Latest Self leveling 3d printer bed
Creality 3D Upgraded Version BL-Touch Heated Bed Auto Bed Leveling Sensor Kit For Ender-3 / Ender-3s / Ender-3 Pro/CR-10 3D Printer
  • Upgraded Version -This is the upgraded version of the original upgraded kit provided by Creality 3D which can be used for Creality V1/ V2 / V4.2.2 / V 4.2.7 mainboard. It include but not limited to the following 3d printer: Ender-3 / Ender-3s / Ender-3 Pro / CR-10/ CR-20 Pro/ CR-10S/ CR-10S4/ CR-10S 5
  • Genuine BLTouch - Each of our Genuine BL Touch has a QR code on PCB.
  • Simple - BLTouch can be easily applied, since it has a small and simple structure. As BLTouch works as usual auto bed leveling sensor, Gathering information & setting up your firmware will be an easy task.
  • Smart - Self-test and alarm.The push pin operate two times in a test when the power is on.The LED light blinks if a problem was found on a self-test or during operation
  • High-precision - BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
Latest Self leveling 3d printer bed
Auto Creality BLTouch Bed Self-Leveling Sensor Fit for CR-10 for ENDER 3 3D Printer Kit
  • Suitable for CR-10 for Ender-3 3D Printer.
  • Made of composite material, durable and long life.
  • Auto self-leveling bed sensor, easy to use.
  • Brand new. Simple to install.
  • Perfect 3D printer accessories, professional parts.
Latest Self leveling 3d printer bed
Aibecy Upgrade Auto Self-Leveling Heatbed Position Adjustment Inductive Proximity Sensor with Mounting Plate & Screws for Anet A8 RepRap Prusa DIY i3 3D Printer
  • Works well with Anet A8 3D printer.
  • Pretty solution for auto-adjusting heatbed level. 10-30V DC working voltage, output NPN.NO.
  • Comes with mounting plate & screws, pre-soldered connector.
  • Anti-jamming three-wire, 140cm / 55.1in cable length.
  • If your Anet A8 can not automatically leveling. You need to contact us and we will give you brush firmware information to upgrade the machine, let it become an automatic leveling, and then install the automatic leveling device can be used.
Latest Self leveling 3d printer bed
Moligh doll Auto Leveling Sensor Bltouch V3.0 Heating Bed Level for Skr V1.3 Board 3D Printer Parts Printing Auto Bed Heater
  • Do not remove or deform elastic material attached on the push-pin.
  • By using progressively designed solenoid and hall sensor,It can integrate high precision in such a simple structure.
  • pushing hard on the push-pin can damage Press sensorand make it less accurate.
  • Fix push-pin with locking paint after reassembling or adjusting core.
  • No matter how bad your 3D printer is. The sensor is still working
Latest Self leveling 3d printer bed
Tangxi 3D Printer Touch Sensor Self-leveling Module, Universal 3D printer Hot Bed Leveling Probe, Automatic Smart Self -Test Touch Sensor Module for 3D Printer
  • Simple. 3Dtouch can be easily applied due to its small size and simple structure. Collecting information and firmware settings will be an easy task as 3dtouch works as an automatic bed leveling sensor as usual.
  • Smart. Self-test: Push the nail operation three times. Alarm: LED light flashes if a problem is found in the self-test or operation.
  • High precision: The standard deviation of the repeatable 3dtouch is about 0.005mm, which is accurate.
  • Innovative electromagnetic, super power saving. In the idle state, while the push is pulled out or retracted, there is no current flowing solenoid valve, the standby current of the whole device is lower than 15ma average. While in the working state, whil
  • Bed width selection: 3D Touch does not use any light, nor close to (inductor / capacitor) sensors. 3D Touch provides high precision through Hall effect control. Therefore, the bed material can be freely chosen.
Latest Self leveling 3d printer bed
VIKTK 3D Printer BL-Touch Sensor Fit For CR-10 For ENDER 3 Auto Self-leveling Bed Sensor 3D Printer Parts Adapter Bracket Set Board Cable
  • Item Type: Adapter Bracket Kit
  • Compatible with: for CR-10 ENDER 3 3D Printer
  • Material: Composite Material
  • Made of high-quality materials, strong and durable.
  • High quality and good performance ensure the efficient operation of the 3D printer.
Latest Self leveling 3d printer bed
Comgrow BL Touch Version 3.1 Auto-Leveling for Creality 3D Printer Ender 3 / Ender 3 Pro/Emder-5
  • BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • BLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensor. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release & Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.
  • Self-test : The push pin operate two times in a test when the power is on.
  • Alarm : The LED light blinks if a problem was found on a self-test or during operation.
  • Wiring defect indicator : Blue and Red LED for indicating wiring defects.
Latest Self leveling 3d printer bed
Creality BL Touch 3D Printer Upgraded Auto Bed Leveling Sensor Kit for Cr-10/Ender 3/Ender 3 Pro/Ender 5/CR 10S/CR-10 S4/S5/CR 20/20 Pro
  • Awesome BLTouch Upgraded Kit: Unlike the inductive probe, Our Creality BLTouch auto bed leveling kit was a touch-based 3D printer bed leveling probe which enables automatic bed leveling on your 3D printer, regardless of print surface. This touch sensor works perfectly with any surface, from glass to blue tape or woods, metals and so on.
  • Widely Application: Used Creality for Ender-3 / Ender-3s / Ender-3 Pro /Ender 5 /CR-10 / CR-10S/ CR 10S4/ CR 10S5/ CR-20 / CR-20 Pro and more 3D Printer(Please flash the firmware first, with ISP cable to connetct computer and printer while CR 10S can be connected directly to computer by USB).
  • High-Precision: BLTouch fulfilled simple structure and high precision by using progressively designed solenoid and hall sensor. BLTouch's Standard Deviation in repeatability is around 0.005mm that make it easier to use and to increase the success rate of shaping.
  • Genuine High Quality Set: Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install.
  • Firmware:Please move to the Creality Official Website to download: https://creality3d.cn/products/ If you have any question, please feel free to contact us!

Buy Self leveling 3d printer bed from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Self leveling 3d printer bed, buy Self leveling 3d printer bed directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Self leveling 3d printer bed including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


Best
Creality 3D Upgraded Version BL-Touch Heated Bed Auto Bed Leveling Sensor Kit For Ender-3 / Ender-3s / Ender-3 Pro/CR-10 3D Printer
  • Upgraded Version -This is the upgraded version of the original upgraded kit provided by Creality 3D which can be used for Creality V1/ V2 / V4.2.2 / V 4.2.7 mainboard. It include but not limited to the following 3d printer: Ender-3 / Ender-3s / Ender-3 Pro / CR-10/ CR-20 Pro/ CR-10S/ CR-10S4/ CR-10S 5
  • Genuine BLTouch - Each of our Genuine BL Touch has a QR code on PCB.
  • Simple - BLTouch can be easily applied, since it has a small and simple structure. As BLTouch works as usual auto bed leveling sensor, Gathering information & setting up your firmware will be an easy task.
  • Smart - Self-test and alarm.The push pin operate two times in a test when the power is on.The LED light blinks if a problem was found on a self-test or during operation
  • High-precision - BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
Best
TOOGOO 1 Set 3D Touch Auto Bed Leveling Sensor Touch 3D Touch Sensor For Anet A8 3D Printer
  • 3D Touches The main functions and controls of 3DTouches are the same as most auto bed leveling sensors, which consists of a RC servo and a Micro-switch, thus, 3DTouches can be used on almost every 3D printer control board.
  • By using progressively designed solenoid and hall sensor, 3DTouches can integrate high precision in such a simple structure. To make it more user-friendly and to bring you more enjoyable printing experience we add many smart functions such as self-test, false alarm, alarm release and test mode for M119.
  • wide Selection of Bed: Does not uses either optical, nor proximity (inductive/capacitive) sensor. It is controlled by Hall Effect, providing high precision. Thus the bed material can be selected freely.
  • 3D Touches is an auto leveling sensor for 3D Printers that can precisely measure the tilt of your print surface. It can greatly improve the printing precision of your 3D Printer.
  • Optimized structure: Larger Build Size: It is a small and technology-intensive one. Build size can be set larger than other existing auto bed leveling sensor. Uses existing RC Servo motor signal intactly, so just plug on the same pins after removing servo motor.
Best
Bl Touch Auto Bed Leveling Sensor BL Touch Sensor for Kossel Delta Rostock 3D Printer has BLTouch Authorization
  • Our Bl Touch is the Genuine which We've got the official authorization of Bl Touch Brand
  • Simple, Smart, High-precision
  • It could work with any kinds of bed materials, such as glasses, woods, metals, and so on
  • BLTouch fulfilled simple structure and high precision by using progressively designed solenoid and hall sensor, and aimed user convenience and enjoyable printing by adding many smart functions, self-test, alarm, alarm release, test mode for M119
  • Smart [Self-test]: The push pin is operated three times to test when the power is on . The LED light blinks if a problem found on a self-test or on an operation - High-precision BLTouch's Standard Deviation in repeatability is around 0.005mm, at that precise
Best
Auto Creality BLTouch Bed Self-Leveling Sensor Fit for CR-10 for ENDER 3 3D Printer Kit
  • Suitable for CR-10 for Ender-3 3D Printer.
  • Made of composite material, durable and long life.
  • Auto self-leveling bed sensor, easy to use.
  • Brand new. Simple to install.
  • Perfect 3D printer accessories, professional parts.
Best
Aibecy Upgrade Auto Self-Leveling Heatbed Position Adjustment Inductive Proximity Sensor with Mounting Plate & Screws for Anet A8 RepRap Prusa DIY i3 3D Printer
  • Works well with Anet A8 3D printer.
  • Pretty solution for auto-adjusting heatbed level. 10-30V DC working voltage, output NPN.NO.
  • Comes with mounting plate & screws, pre-soldered connector.
  • Anti-jamming three-wire, 140cm / 55.1in cable length.
  • If your Anet A8 can not automatically leveling. You need to contact us and we will give you brush firmware information to upgrade the machine, let it become an automatic leveling, and then install the automatic leveling device can be used.

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Self leveling 3d printer bed

Here is the ranking of the best Self leveling 3d printer bed, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Self leveling 3d printer bed and read the reviews left by real customers, see the Self leveling 3d printer bed ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Self leveling 3d printer bed New
GzxLaY 3D Printer 1 Set 3D Touch Auto Bed Leveling Sensor Touch 3D Touch Sensor for Anet A8 3D Printer
  • Wide Selection of Bed: Does not uses either optical, nor proximity (inductive/capacitive) sensor. It is controlled by Hall Effect, providing high precision. Thus the bed material can be selected freely.
  • 3D Touches is an auto leveling sensor for 3D Printers that can precisely measure the tilt of your print surface. It can greatly improve the printing precision of your 3D Printer.
  • 3D Touches The main functions and controls of 3DTouches are the same as most auto bed leveling sensors, which consists of a RC servo and a Micro-switch, thus, 3DTouches can be used on almost every 3D printer control board.
  • By using progressively designed solenoid and hall sensor, 3DTouches can integrate high precision in such a simple structure. To make it more user-friendly and to bring you more enjoyable printing experience we add many smart functions such as self-test, false alarm, alarm release and test mode for M119.
  • [Reliable after-sales service] We provide you with reliable after-sales service. If you have any questions about our products or your packaging, please feel free to contact us. We will reply you within 12 hours, and we will try our best to solve the problem until you are satisfied.
Self leveling 3d printer bed New
Accessories 1 Set 3D Touch Auto Bed Leveling Sensor Touch 3D Touch Sensor For Anet A8 3D Printer 3D Printer 3D Printer
  • 3D Touches The main functions and controls of 3DTouches are the same as most auto bed leveling sensors, which consists of a RC servo and a Micro-switch, thus, 3DTouches can be used on almost every 3D printer control board.
  • 3D Touches is an auto leveling sensor for 3D Printers that can precisely measure the tilt of your print surface. It can greatly improve the printing precision of your 3D Printer.
  • wide Selection of Bed: Does not uses either optical, nor proximity (inductive/capacitive) sensor. It is controlled by Hall Effect, providing high precision. Thus the bed material can be selected freely.
  • By using progressively designed solenoid and hall sensor, 3DTouches can integrate high precision in such a simple structure. To make it more user-friendly and to bring you more enjoyable printing experience we add many smart functions such as self-test, false alarm, alarm release and test mode for M119.
  • We strive to answer all questions and resolve any problems as quickly as possible. Your satisfication is Our Goal! Thank you!
Self leveling 3d printer bed New
GzxLaY 3D Printer Stepper Motor Driver, DM542 2-Phase Stepper Motor Driver 57/86 Series Stepping Motor Driver 18-48VDC Peak 4.2A
  • Integrated with parameter self-tuning function, which can automatically generate optimal operating parameters for different motors.
  • Can drive 4-wire / 8-wire two-phase stepper motor.
  • Optical isolation signal input, strong anti-interference ability.
  • Stable running and low noise under medium-low speed.
  • [Reliable after-sales service] We provide you with reliable after-sales service. If you have any questions about our products or your packaging, please feel free to contact us. We will reply you within 12 hours, and we will try our best to solve the problem until you are satisfied.
Self leveling 3d printer bed New
3D Printer BLTouch,BLTouch Auto Bed Leveling Sensor Kit for Creality ender‑3 Silent Mainboard V4.2.7
  • Strong compatibility, intelligent self ‑ check, easy and convenient to apply to printer.
  • Compact size, easy to install on 3D printer. Makes it easier to level off a hot bed.
  • An auto‑leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface.
  • Adopt automatic leveling function, more convenient to use, improve the success rate of shaping.
  • Can be used with any kind of bed material, such as glass, wood, metal, etc.
Self leveling 3d printer bed New
Leveling Sensor, Convenient Widely Used Compact Size Strong Compatibility High Efficiency Leveling Sensor Kit, Bed Material for Leveling
  • Can be used with any kind of bed material, such as glass, wood, metal, etc.
  • An auto‑leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface.
  • Compact size, easy to install on 3D printer. Makes it easier to level off a hot bed.
  • Strong compatibility, intelligent self ‑ check, easy and convenient to apply to printer.
  • Adopt automatic leveling function, more convenient to use, improve the success rate of shaping.
Self leveling 3d printer bed New
BLTouch, Aluminum Leveling Sensor, Bed Material Metal for Leveling Glass
  • Can be used with any kind of bed material, such as glass, wood, metal, etc.
  • An auto‑leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface.
  • Compact size, easy to install on 3D printer. Makes it easier to level off a hot bed.
  • Strong compatibility, intelligent self ‑ check, easy and convenient to apply to printer.
  • Adopt automatic leveling function, more convenient to use, improve the success rate of shaping.
Self leveling 3d printer bed New
Module Kit 3D Printer Accessories,Auto-Levelling Module Sensor Upgrade Kit for Ender-3/5 3D Printer Accessories Black
  • Strong compatibility, capable of intelligent self‑checking, easy to apply
  • Small size and compact workmanship, easy to install on 3D printer, convenient to operate
  • Can make it easier to level the hot bed, and can accurately measure the inclination of the bed surface
  • Using automatic leveling function, it is more convenient to use and improve the success rate
  • The product is an automatic level sensor for 3D printers, which can be used with any kind of bed material, such as glass, wood, metal, etc.
Self leveling 3d printer bed New
Auto‑Leveling Module, Printer Leveling Module Kit, Aluminum Compact Workmanship Glass Metal Bed Material for 3D Printer
  • The product is an automatic level sensor for 3D printers, which can be used with any kind of bed material, such as glass, wood, metal, etc.
  • Strong compatibility, capable of intelligent self‑checking, easy to apply
  • Can make it easier to level the hot bed, and can accurately measure the inclination of the bed surface
  • Using automatic leveling function, it is more convenient to use and improve the success rate
  • Small size and compact workmanship, easy to install on 3D printer, convenient to operate
Self leveling 3d printer bed New
Accessories 3D Bl-Touch V3.0 Auto Leveling Sensor Heating Bed Level Sensor Bl-Touch Leveling Probe Heater Inductive Bed Sensor To Fdm Printer 3D Printer 3D Printer
  • Item Type: Auto Self-Leveling Sensor
  • BL-Touch can be operated in the following condition.
  • One I/O for control (PWM or Software PWM)
  • Model Number: BL-Touch
  • We strive to answer all questions and resolve any problems as quickly as possible. Your satisfication is Our Goal! Thank you!

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Self leveling 3d printer bed. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Self leveling 3d printer bed give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

ZANYUYU Computer Accessories, 3D Printer Original BL-Touch Smart Auto Bed Leveling Sensor To be a Premium
  • Thermal runaway protection enabled.Circuit optimization circuit, effectively solve the heat problem.
  • Simple - BLTouch can be easily applied, since it has a small and simple structure. As BLTouch works as usual auto bed leveling sensor, Gathering information & setting up your firmware will be an easy task.
  • Smart - Self-test and alarm
  • High-precision - BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.
  • If you have any questions about the product, you can send an email to us and we will answer it for you.
3D Printer Levelers,Auto-Levelling Module Sensor Upgrade Kit for Ender-3/5 3D Printer Accessories Black
  • 【Characteristic】Strong compatibility, capable of intelligent self‑checking, easy to apply
  • 【Easy to Use】Small size and compact workmanship, easy to install on 3D printer, convenient to operate
  • 【The Main Purpose】Can make it easier to level the hot bed, and can accurately measure the inclination of the bed surface
  • 【Good Experience】Using automatic leveling function, it is more convenient to use and improve the success rate
  • 【Use of Matching】The product is an automatic level sensor for 3D printers, which can be used with any kind of bed material, such as glass, wood, metal, etc.
Monitoring Power 3D Printer Original BL-Touch Smart Auto Bed Leveling Sensor To be a Premium 3D Printer
  • Our kits include all screws and all necessary components, widely used in 3D printers, monitors / medical equipment / textiles / packaging, stage lighting, etc.
  • Simple - BLTouch can be easily applied, since it has a small and simple structure. As BLTouch works as usual auto bed leveling sensor, Gathering information & setting up your firmware will be an easy task.
  • Smart - Self-test and alarm
  • High-precision - BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.
  • If for some reason you are not thrilled with our product, simply contact us for a replacement or refund.We can serve you at any time.
Mifive Suitable for 3D Printer Accessories Ramps1.5+3D Press Sensor Automatic Leveling Sensor Set
  • Alarm: LED light flashes, if a problem is found in self-check or surgery
  • If you choose 3dtouch, the 3D printer will be a top-notch masterpiece and give you a pleasant experience.
  • description:1. Simple: 3DPress can be easily applied due to its small size and simple structure. Gathering information and firmware settings will be an easy task, because 3dPress works as usual with automatic bed leveling sensors.
  • 2. Intelligence: Self-test: Push the nail three times to test when the power is
  • 4. Innovative electromagnetic: super power saving, in idle state, and whether the promotion is pulled out or retracted, there is no current flowing solenoid valve, and the standby current of the entire device is lower than 15ma average, while in working state, while walking Suddenly about 100ms, the device flows under 300ma. Low power consumption even further reduces Joule heating, preventing thermal problems.
Facibom BL-TOUCH 3D Printer Accessories for Creality Ender 3 CR-10 Plate Bracket
  • NEW style 3D Press (with plastic probe) auto Bed Leveling Sensor for 3D Printer CR-10 ENDER 3 ENDER 5
  • Everything you need to install 3D Press onto your printer. May work with other manufacturers.
  • PIN 27 board pins: Brown-Ground, Red-5v, Yellow/Orange-Signal

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Self leveling 3d printer bed actually costs.

Latest Self leveling 3d printer bed
Eryone 3D Printer ER-20, Auto-leveling Bed Sensor, Super Quiet 3D Printer with Powerful 32Bit Motherboard, Size 250 * 220 * 200mm
  • Easy to Use: Auto-bed leveling gives you the perfect first layer and the ink coating glass makes you stick and remove printed objects easily.

  • Silent: TMC2209 offers whisper quiet and more accurate printing without the need of mechanical limit switch (sensorless).

  • Simplicity: Modular design, built-in power supply, auto bed leveling sensor, no bed adjust knob, plug and play. ER20‘s sleek & streamlined round corners comply with the ergonomic design.

  • Reliable: ER20 supplies resume printing, sparing you the unexpected head-scratching outage. Fully upgraded aluminum profile frame provides durability. The reliable extruder is mounted with an Eryone sensor for hassle-free printing.

  • Power failure resume feature: Built-in supercapacitor and circuit designing, the mainboard will store the height value of Z-axis when the power off. When the power system resume, the printer can resume the print

Latest Self leveling 3d printer bed
Creality 3D Upgraded Version BL-Touch Heated Bed Auto Bed Leveling Sensor Kit For Ender-3 / Ender-3s / Ender-3 Pro/CR-10 3D Printer
  • Upgraded Version -This is the upgraded version of the original upgraded kit provided by Creality 3D which can be used for Creality V1/ V2 / V4.2.2 / V 4.2.7 mainboard. It include but not limited to the following 3d printer: Ender-3 / Ender-3s / Ender-3 Pro / CR-10/ CR-20 Pro/ CR-10S/ CR-10S4/ CR-10S 5
  • Genuine BLTouch - Each of our Genuine BL Touch has a QR code on PCB.
  • Simple - BLTouch can be easily applied, since it has a small and simple structure. As BLTouch works as usual auto bed leveling sensor, Gathering information & setting up your firmware will be an easy task.
  • Smart - Self-test and alarm.The push pin operate two times in a test when the power is on.The LED light blinks if a problem was found on a self-test or during operation
  • High-precision - BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
Latest Self leveling 3d printer bed
Auto Creality BLTouch Bed Self-Leveling Sensor Fit for CR-10 for ENDER 3 3D Printer Kit
  • Suitable for CR-10 for Ender-3 3D Printer.
  • Made of composite material, durable and long life.
  • Auto self-leveling bed sensor, easy to use.
  • Brand new. Simple to install.
  • Perfect 3D printer accessories, professional parts.
Latest Self leveling 3d printer bed
Aibecy Upgrade Auto Self-Leveling Heatbed Position Adjustment Inductive Proximity Sensor with Mounting Plate & Screws for Anet A8 RepRap Prusa DIY i3 3D Printer
  • Works well with Anet A8 3D printer.
  • Pretty solution for auto-adjusting heatbed level. 10-30V DC working voltage, output NPN.NO.
  • Comes with mounting plate & screws, pre-soldered connector.
  • Anti-jamming three-wire, 140cm / 55.1in cable length.
  • If your Anet A8 can not automatically leveling. You need to contact us and we will give you brush firmware information to upgrade the machine, let it become an automatic leveling, and then install the automatic leveling device can be used.
Latest Self leveling 3d printer bed
Moligh doll Auto Leveling Sensor Bltouch V3.0 Heating Bed Level for Skr V1.3 Board 3D Printer Parts Printing Auto Bed Heater
  • Do not remove or deform elastic material attached on the push-pin.
  • By using progressively designed solenoid and hall sensor,It can integrate high precision in such a simple structure.
  • pushing hard on the push-pin can damage Press sensorand make it less accurate.
  • Fix push-pin with locking paint after reassembling or adjusting core.
  • No matter how bad your 3D printer is. The sensor is still working
Latest Self leveling 3d printer bed
Tangxi 3D Printer Touch Sensor Self-leveling Module, Universal 3D printer Hot Bed Leveling Probe, Automatic Smart Self -Test Touch Sensor Module for 3D Printer
  • Simple. 3Dtouch can be easily applied due to its small size and simple structure. Collecting information and firmware settings will be an easy task as 3dtouch works as an automatic bed leveling sensor as usual.
  • Smart. Self-test: Push the nail operation three times. Alarm: LED light flashes if a problem is found in the self-test or operation.
  • High precision: The standard deviation of the repeatable 3dtouch is about 0.005mm, which is accurate.
  • Innovative electromagnetic, super power saving. In the idle state, while the push is pulled out or retracted, there is no current flowing solenoid valve, the standby current of the whole device is lower than 15ma average. While in the working state, whil
  • Bed width selection: 3D Touch does not use any light, nor close to (inductor / capacitor) sensors. 3D Touch provides high precision through Hall effect control. Therefore, the bed material can be freely chosen.
Latest Self leveling 3d printer bed
VIKTK 3D Printer BL-Touch Sensor Fit For CR-10 For ENDER 3 Auto Self-leveling Bed Sensor 3D Printer Parts Adapter Bracket Set Board Cable
  • Item Type: Adapter Bracket Kit
  • Compatible with: for CR-10 ENDER 3 3D Printer
  • Material: Composite Material
  • Made of high-quality materials, strong and durable.
  • High quality and good performance ensure the efficient operation of the 3D printer.
Latest Self leveling 3d printer bed
Comgrow BL Touch Version 3.1 Auto-Leveling for Creality 3D Printer Ender 3 / Ender 3 Pro/Emder-5
  • BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • BLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensor. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release & Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.
  • Self-test : The push pin operate two times in a test when the power is on.
  • Alarm : The LED light blinks if a problem was found on a self-test or during operation.
  • Wiring defect indicator : Blue and Red LED for indicating wiring defects.
Latest Self leveling 3d printer bed
Creality BL Touch 3D Printer Upgraded Auto Bed Leveling Sensor Kit for Cr-10/Ender 3/Ender 3 Pro/Ender 5/CR 10S/CR-10 S4/S5/CR 20/20 Pro
  • Awesome BLTouch Upgraded Kit: Unlike the inductive probe, Our Creality BLTouch auto bed leveling kit was a touch-based 3D printer bed leveling probe which enables automatic bed leveling on your 3D printer, regardless of print surface. This touch sensor works perfectly with any surface, from glass to blue tape or woods, metals and so on.
  • Widely Application: Used Creality for Ender-3 / Ender-3s / Ender-3 Pro /Ender 5 /CR-10 / CR-10S/ CR 10S4/ CR 10S5/ CR-20 / CR-20 Pro and more 3D Printer(Please flash the firmware first, with ISP cable to connetct computer and printer while CR 10S can be connected directly to computer by USB).
  • High-Precision: BLTouch fulfilled simple structure and high precision by using progressively designed solenoid and hall sensor. BLTouch's Standard Deviation in repeatability is around 0.005mm that make it easier to use and to increase the success rate of shaping.
  • Genuine High Quality Set: Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install.
  • Firmware:Please move to the Creality Official Website to download: https://creality3d.cn/products/ If you have any question, please feel free to contact us!

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Self leveling 3d printer bed could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Self leveling 3d printer bed which are among the cheapest on the market. Just scroll through the list to find Self leveling 3d printer bed the cheapest products.

Catalog

The product Self leveling 3d printer bed can be found in the dedicated catalog where the entire list of products on sale is presented.

Self leveling 3d printer bed is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Self leveling 3d printer bed New
GzxLaY 3D Printer 1 Set 3D Touch Auto Bed Leveling Sensor Touch 3D Touch Sensor for Anet A8 3D Printer
  • Wide Selection of Bed: Does not uses either optical, nor proximity (inductive/capacitive) sensor. It is controlled by Hall Effect, providing high precision. Thus the bed material can be selected freely.
  • 3D Touches is an auto leveling sensor for 3D Printers that can precisely measure the tilt of your print surface. It can greatly improve the printing precision of your 3D Printer.
  • 3D Touches The main functions and controls of 3DTouches are the same as most auto bed leveling sensors, which consists of a RC servo and a Micro-switch, thus, 3DTouches can be used on almost every 3D printer control board.
  • By using progressively designed solenoid and hall sensor, 3DTouches can integrate high precision in such a simple structure. To make it more user-friendly and to bring you more enjoyable printing experience we add many smart functions such as self-test, false alarm, alarm release and test mode for M119.
  • [Reliable after-sales service] We provide you with reliable after-sales service. If you have any questions about our products or your packaging, please feel free to contact us. We will reply you within 12 hours, and we will try our best to solve the problem until you are satisfied.
Self leveling 3d printer bed New
Accessories 1 Set 3D Touch Auto Bed Leveling Sensor Touch 3D Touch Sensor For Anet A8 3D Printer 3D Printer 3D Printer
  • 3D Touches The main functions and controls of 3DTouches are the same as most auto bed leveling sensors, which consists of a RC servo and a Micro-switch, thus, 3DTouches can be used on almost every 3D printer control board.
  • 3D Touches is an auto leveling sensor for 3D Printers that can precisely measure the tilt of your print surface. It can greatly improve the printing precision of your 3D Printer.
  • wide Selection of Bed: Does not uses either optical, nor proximity (inductive/capacitive) sensor. It is controlled by Hall Effect, providing high precision. Thus the bed material can be selected freely.
  • By using progressively designed solenoid and hall sensor, 3DTouches can integrate high precision in such a simple structure. To make it more user-friendly and to bring you more enjoyable printing experience we add many smart functions such as self-test, false alarm, alarm release and test mode for M119.
  • We strive to answer all questions and resolve any problems as quickly as possible. Your satisfication is Our Goal! Thank you!
Self leveling 3d printer bed New
GzxLaY 3D Printer Stepper Motor Driver, DM542 2-Phase Stepper Motor Driver 57/86 Series Stepping Motor Driver 18-48VDC Peak 4.2A
  • Integrated with parameter self-tuning function, which can automatically generate optimal operating parameters for different motors.
  • Can drive 4-wire / 8-wire two-phase stepper motor.
  • Optical isolation signal input, strong anti-interference ability.
  • Stable running and low noise under medium-low speed.
  • [Reliable after-sales service] We provide you with reliable after-sales service. If you have any questions about our products or your packaging, please feel free to contact us. We will reply you within 12 hours, and we will try our best to solve the problem until you are satisfied.
Self leveling 3d printer bed New
3D Printer BLTouch,BLTouch Auto Bed Leveling Sensor Kit for Creality ender‑3 Silent Mainboard V4.2.7
  • Strong compatibility, intelligent self ‑ check, easy and convenient to apply to printer.
  • Compact size, easy to install on 3D printer. Makes it easier to level off a hot bed.
  • An auto‑leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface.
  • Adopt automatic leveling function, more convenient to use, improve the success rate of shaping.
  • Can be used with any kind of bed material, such as glass, wood, metal, etc.
Self leveling 3d printer bed New
Leveling Sensor, Convenient Widely Used Compact Size Strong Compatibility High Efficiency Leveling Sensor Kit, Bed Material for Leveling
  • Can be used with any kind of bed material, such as glass, wood, metal, etc.
  • An auto‑leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface.
  • Compact size, easy to install on 3D printer. Makes it easier to level off a hot bed.
  • Strong compatibility, intelligent self ‑ check, easy and convenient to apply to printer.
  • Adopt automatic leveling function, more convenient to use, improve the success rate of shaping.
Self leveling 3d printer bed New
BLTouch, Aluminum Leveling Sensor, Bed Material Metal for Leveling Glass
  • Can be used with any kind of bed material, such as glass, wood, metal, etc.
  • An auto‑leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface.
  • Compact size, easy to install on 3D printer. Makes it easier to level off a hot bed.
  • Strong compatibility, intelligent self ‑ check, easy and convenient to apply to printer.
  • Adopt automatic leveling function, more convenient to use, improve the success rate of shaping.
Self leveling 3d printer bed New
Module Kit 3D Printer Accessories,Auto-Levelling Module Sensor Upgrade Kit for Ender-3/5 3D Printer Accessories Black
  • Strong compatibility, capable of intelligent self‑checking, easy to apply
  • Small size and compact workmanship, easy to install on 3D printer, convenient to operate
  • Can make it easier to level the hot bed, and can accurately measure the inclination of the bed surface
  • Using automatic leveling function, it is more convenient to use and improve the success rate
  • The product is an automatic level sensor for 3D printers, which can be used with any kind of bed material, such as glass, wood, metal, etc.
Self leveling 3d printer bed New
Auto‑Leveling Module, Printer Leveling Module Kit, Aluminum Compact Workmanship Glass Metal Bed Material for 3D Printer
  • The product is an automatic level sensor for 3D printers, which can be used with any kind of bed material, such as glass, wood, metal, etc.
  • Strong compatibility, capable of intelligent self‑checking, easy to apply
  • Can make it easier to level the hot bed, and can accurately measure the inclination of the bed surface
  • Using automatic leveling function, it is more convenient to use and improve the success rate
  • Small size and compact workmanship, easy to install on 3D printer, convenient to operate
Self leveling 3d printer bed New
Accessories 3D Bl-Touch V3.0 Auto Leveling Sensor Heating Bed Level Sensor Bl-Touch Leveling Probe Heater Inductive Bed Sensor To Fdm Printer 3D Printer 3D Printer
  • Item Type: Auto Self-Leveling Sensor
  • BL-Touch can be operated in the following condition.
  • One I/O for control (PWM or Software PWM)
  • Model Number: BL-Touch
  • We strive to answer all questions and resolve any problems as quickly as possible. Your satisfication is Our Goal! Thank you!

Where to buy?

If you are asking yourself where to buy Self leveling 3d printer bed? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Self leveling 3d printer bed, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Self leveling 3d printer bed and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Self leveling 3d printer bed may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Self leveling 3d printer bed used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Self leveling 3d printer bed at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

ZANYUYU Computer Accessories, 3D Printer Original BL-Touch Smart Auto Bed Leveling Sensor To be a Premium
  • Thermal runaway protection enabled.Circuit optimization circuit, effectively solve the heat problem.
  • Simple - BLTouch can be easily applied, since it has a small and simple structure. As BLTouch works as usual auto bed leveling sensor, Gathering information & setting up your firmware will be an easy task.
  • Smart - Self-test and alarm
  • High-precision - BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.
  • If you have any questions about the product, you can send an email to us and we will answer it for you.
3D Printer Levelers,Auto-Levelling Module Sensor Upgrade Kit for Ender-3/5 3D Printer Accessories Black
  • 【Characteristic】Strong compatibility, capable of intelligent self‑checking, easy to apply
  • 【Easy to Use】Small size and compact workmanship, easy to install on 3D printer, convenient to operate
  • 【The Main Purpose】Can make it easier to level the hot bed, and can accurately measure the inclination of the bed surface
  • 【Good Experience】Using automatic leveling function, it is more convenient to use and improve the success rate
  • 【Use of Matching】The product is an automatic level sensor for 3D printers, which can be used with any kind of bed material, such as glass, wood, metal, etc.
Monitoring Power 3D Printer Original BL-Touch Smart Auto Bed Leveling Sensor To be a Premium 3D Printer
  • Our kits include all screws and all necessary components, widely used in 3D printers, monitors / medical equipment / textiles / packaging, stage lighting, etc.
  • Simple - BLTouch can be easily applied, since it has a small and simple structure. As BLTouch works as usual auto bed leveling sensor, Gathering information & setting up your firmware will be an easy task.
  • Smart - Self-test and alarm
  • High-precision - BLTouch’s Standard Deviation in repeatability is around 0.005mm, at that precise.
  • If for some reason you are not thrilled with our product, simply contact us for a replacement or refund.We can serve you at any time.
Mifive Suitable for 3D Printer Accessories Ramps1.5+3D Press Sensor Automatic Leveling Sensor Set
  • Alarm: LED light flashes, if a problem is found in self-check or surgery
  • If you choose 3dtouch, the 3D printer will be a top-notch masterpiece and give you a pleasant experience.
  • description:1. Simple: 3DPress can be easily applied due to its small size and simple structure. Gathering information and firmware settings will be an easy task, because 3dPress works as usual with automatic bed leveling sensors.
  • 2. Intelligence: Self-test: Push the nail three times to test when the power is
  • 4. Innovative electromagnetic: super power saving, in idle state, and whether the promotion is pulled out or retracted, there is no current flowing solenoid valve, and the standby current of the entire device is lower than 15ma average, while in working state, while walking Suddenly about 100ms, the device flows under 300ma. Low power consumption even further reduces Joule heating, preventing thermal problems.
Facibom BL-TOUCH 3D Printer Accessories for Creality Ender 3 CR-10 Plate Bracket
  • NEW style 3D Press (with plastic probe) auto Bed Leveling Sensor for 3D Printer CR-10 ENDER 3 ENDER 5
  • Everything you need to install 3D Press onto your printer. May work with other manufacturers.
  • PIN 27 board pins: Brown-Ground, Red-5v, Yellow/Orange-Signal

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Self leveling 3d printer bed.

Rating: 3.87 of 5 - 23 votes
1 Star2 Stars3 Stars4 Stars5 Stars (23 votes, average: 3.87 out of 5)
Loading...