Selective laser sintering 3d printer Reviews and Best Deals

Online product reviews and comparisons for Selective laser sintering 3d printer.

DISCOUNTLatest Selective laser sintering 3d printer
Laser Level, HYCHIKA 15M Self-Leveling Line Laser with Double Laser Module, 360 ° Laser with 2 Lines Horizontal/Vertical, Flexible Magnetic Base, Bag and 2 x AA Batteries Included
  • 【DOUBLE LASER MODULE】 The Laser Level has Dual Laser Module that satisfies your different needs, you can toggle between vertical & horizontal lines, in addition, it has higher brightness and lower energy consumption.
  • 【SELF-LEVELING WITHIN WITHIN 4 °】 Unlock the pendulum, inclination angle ≤4 °, the laser is automatically leveled. Otherwise, the laser flashes to indicate the out-of-level condition. Lock the pendulum to switch to manual mode, you can adjust the lines without self-leveling in the desired orientation.
  • 【FLEXIBLE MAGNETIC SUPPORT】 The Laser Level can be affixed to most metal surfaces with the magnetic retainer (included) or mounted on a 1/4 " - 20 tripod (not included) .The line laser can be rotated 360 degrees and one Project red laser cross line at any position or angle.
  • 【20H BATTERY LIFE AND WIDE APPLICATIONS】 Over 20 hours battery life with continuous use. Suitable for wide uses: such as paving tiles, installing carpentry for doors, windows or furniture, hanging wallpaper, etc. But not suitable for outdoor use.
  • 【WHAT YOU GET】 1 x HYCHIKA Line Laser, 1 x Magnetic L Mount, 1x Carrying Case, 2 x AA Batteries, 1 x User Manual
Latest Selective laser sintering 3d printer
ANYCUBIC 3D Printer Mega Zero V2 Fast Assemble & Heating Auxiliary Leveling FDM Printer with Magnetic Printing Bed and Resume Printing 220x220x250mm Support PLA, TPU, WOOD, PETG
  • Easy assembly and fast printing:ANYCUBIC MEGA ZERO 2.0 Printing Size: 220mm*220mm*250mm; Smaller and lighter body, but bigger print volume than ANYCUBIC I3 MEGA S. Semi-assembly kit easy to assemble, save time and get started quickly
  • Magnetic stickers: Mega zero 2.0 adopts magnetic stickers, which can be reused without masking paper or glue, which is convenient for taking molds. After the model is cooled, bend the sticker to remove the model
  • Powerful Extruder:Strong extruder provides a better printing experience. Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print 1,75mm Materials: TPU, PLA, ABS,HIPS, WOOD etc
  • Fast heating UP: 3d printing Mega zero 2.0 only needs to heat up for 5 minutes, the hot bed can reach 100℃, which improves the printing efficiency, it can reach 100℃ within 5 minutes, which is convenient and fast
  • After Sale Service: All of our 3d printers provide one month free return and exchange, one year warranty (exclude consumable parts like printer head & platform bed) and lifetime technical support, If you encounter any problems, please feel free contact us
Latest Selective laser sintering 3d printer
Creality Ender 3 Pro 3D Printers with Printing Resume Big Volume 220 * 220 * 250mm Flexible Removable Hotbed Building Surface
  • [MeanWell Power Supply] - We adopt the MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • [More Stable] - Redesigned with a much more sturdy, 40x40 aluminum extrusion for the Y-axis base. This provides stability for the printing process, leading to better print quality.
  • [Superior Printing Surface] - A new state of the art “C-MAG” magnetic sticker is designed for Ender 3 Pro, it is entirely removable, flexible and can better adhere to the platform. Once the model is finished printing, remove the magnetic upper from the lower and bend or flex the print surface to watch the model effortlessly pop off the printing surface.
  • [Enriched Accessories] - It must be surprising that more useful accessories included in our package. Extra parts can save you time while you need, also cost-effective.
DISCOUNTLatest Selective laser sintering 3d printer
ELEGOO Mars Pro MSLA 3D Printer UV Photocuring LCD 3D Printer with Matrix UV LED Light Source, Built-In Activated Carbon,Off-Line Print 4.53in(L) x 2.56in(W) x 5.9in(H) Printing Size
  • 【Higher Precision and Excellent Performance】Z axis utilizes linear guideway structure, which achieves steadier motion and greatly enhanced moving accuracy to reduce the layer lines on the 3D printed model and make the surface much smoother. The set screws of the build plate are now upgraded to larger anti-slip hexagon socket screws, which have a more stable leveling result. CNC turning CD pattern on the build plate provides a much stronger adherence, especially when printing large 3D models.
  • 【No Irritative Odor Experience】Mars Pro comes with a silicone rubber seal that can be put on the cover to prevent the resin odor from leaking. Built-in activated carbon can absorb and filter the resin odor before they are ventilated throughout the cooling fan, which gives you a fresh and safe user experience.
  • 【Light and Convenient 】Remodeled resin vat made of aluminum alloy is light yet sturdy. The USB port is relocated to the front for your convenience. Mars Pro uses a new user interface with a dark theme and simple design.
  • 【Qulity Prints and Consistent Success】Matrix light source consists of 28 50Watt UV LED lights that have uniform light emission, ensuring superior printing results, a more accurate printing size, and saves your time by 25% in layer exposure time. Mars Pro is the first resin-based 3D printer to use the sliced file of .ctb format, which reduces the file size by an average of 90% compared to .cbddlp format and significantly increases the printing success rate when printing bigger models.
  • 【Warranty and Privilege 】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded). Parts and replacements will be shipped from the overseas warehouse to offer you quality and fast customer service.
Latest Selective laser sintering 3d printer
ANYCUBIC Mega Pro 3D Printer, with 3D Printing & Laser Engraving 2 in 1, 210×210×205mm (Print Size)& 220×140mm(Engraving Size), Support 1.75mm PLA Filament
  • Multi-function 3D Printer: ANYCUBIC Mega Pro FDM 3D Printer Integrate the functions of 3d printing and laser engraving. Multiple functions to unleash your creative potential. Printing Size: 210 x 210 x 205mm; Engraving size: 220×140 mm. Laser engraving can be used in various fields, such as Decoration, Personalized custom, Art design, etc.
  • Multi-color Printing: The Mega Pro FDM 3D Printer can offer the option to print with a colorful model on a single nozzle by pausing at a specific layer Seamless Connection. (Pause up to 6 times)
  • Smart Auxiliary Leveling: The Mega Pro 3D Printer can automatically locate the leveling spot of the print platform and beep alert to precise print head height during leveling.
  • Full Rigid Solid Metal Frame & Modular Design: The ANYCUBIC Mega Pro 3D Printer has sturdy construction enhances the stability when printing which leads to highly detailed prints. With a modular design, it can be assembled in just a few minutes.
  • More Function: 1)The Mega Pro 3D Printer has TFT Touch Screen-As responsive as operating on the phone. 2)All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours of professional customer service.
Latest Selective laser sintering 3d printer
Kacsoo Newest Version DIY CNC Laser Engraver Kits,40x50cm,2 Axis (2500MW) DIY CNC Laser Engraver Kits 12V USB Desktop Laser Engraving Machine Wood Carving Engraving Cutting
  • 【Ultra large Engraving Area】compatible with Windows and XP series,Not compatible with mac . 40X50cm ultra large engraving area,gantry shape design, no engraving height limitation
  • 【Entertainment Assistant】This DIY desktop blue (blue purple) laser engraving machine is ideal for amateur laser engraving usage with grayscale printing,low-light positioning and freedom positioning functions Support windows 7,8,10.
  • 【Structural Design 】Construction-Body Aluminum + Acrylic, Voltage-12V/5A/110~240V, Engraving area-40x50cm, Laser power- 2500MW
  • 【High speed operation, Clear analysis】Two stepper motor impulses that provide a fast moving speed. This website provides a detailed video of installation and operation of this CNC.also include Software download adress, Other products on the website can also be found in our store. Website address: http://bachinmaker.com/wiki/doku.php?id=start
  • 【Wide range of Applications】Can be processed material Wood, plastic, paper, bamboo, horns, a little leather (wallet), plastic phone shell, rubber chapter, photosensitive chapter, sponge paper
Latest Selective laser sintering 3d printer
Samsung Xpress M2026W A4 Mono Wireless, Black & White Laser Printer (20 ppm)
  • Print with minimal noise levels
  • Work faster with One Touch Screen Print
  • Power consumption : 310 watts (Printing) . 1.9 watts (Power Save) . 30 watts (Ready)
  • Print in less than 8.5 seconds with Ready Mode
  • WPS, Mobile Print, NFC
Latest Selective laser sintering 3d printer
ANYCUBIC 3D Printer MEGA X Large Size FDM 3D Printer with Resume Print and Removable UltraBase Hotbed Platform with Free 1kg PLA Filament, Support PLA, ABS, TPU,Build Size 300X300X305mm
  • Quick Assembly: 3 steps to set up the printer with fix 12 screws and 3 cables within minutes not only to an expert user but also to beginner.
  • Large Build Volume: ANYCUBIC large 3D printer mega X comes with larger build spaces available. At 300*300*305mm, able to print models that 90% of other 3d printers could not. More space for fulfilling your fantastic idea.
  • Resume Print: One click to resume from the last recorded position when suffered power outages, no more worries about accident power off.Support print 1.75mm materials: TPU, PLA, ABS, HIPS, WOOD etc.
  • Ultrabase Platform: The MEGA X platform is covered a layer of patented microporous to provide excellent adhesion. And easy to take off the model from the platform after it cool down. It can be repeatedly used without sacrificing performance.
  • After Sale Service: All of our 3d printers provide one month free return and exchange, one year warranty (exclude consumable parts like printer head & platform bed) and lifetime technical support, If you encounter any problems, please feel free contact us
DISCOUNTLatest Selective laser sintering 3d printer
Creality 3D Ender-3 3D Printer DIY Easy-assemble 220 * 220 * 250mm Printing Size with Resume Printing Support PLA, ABS, TPU
  • High-precision 3D printer with ±0.1mm high printing accuracy, 220 * 220 * 250mm large printing size with one-piece structure, saving space but building the world.
  • MK-8 extruder greatly reduces plugging risk and bad extrustion; and the hotbed can reach 110℃ in about 5 minutes to meet the needs of fast heating and printing.
  • Safely protected power supply and resume printing function, if the machine is shut down or power failure accidentally, it can continue printing after power on.
  • Compatible with various 1.75mm printing filaments like PLA, ABS, TPU, etc; wide applications, can be used for product structure design, toy modeling, architectural design, parts manufacturing, etc.
  • CNC machining of Y-rail mounting groove to make sure precise positioning and keep the stable frame with high-precision printing quality. Adopts V-socket linear bearing system and wheel moving parts, super noiseless and smooth printing performance; big hand twist nut make the print platform easier to level.

Buy Selective laser sintering 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Selective laser sintering 3d printer, buy Selective laser sintering 3d printer directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Selective laser sintering 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


DISCOUNTBest
Laser Level, HYCHIKA 15M Self-Leveling Line Laser with Double Laser Module, 360 ° Laser with 2 Lines Horizontal/Vertical, Flexible Magnetic Base, Bag and 2 x AA Batteries Included
  • 【DOUBLE LASER MODULE】 The Laser Level has Dual Laser Module that satisfies your different needs, you can toggle between vertical & horizontal lines, in addition, it has higher brightness and lower energy consumption.
  • 【SELF-LEVELING WITHIN WITHIN 4 °】 Unlock the pendulum, inclination angle ≤4 °, the laser is automatically leveled. Otherwise, the laser flashes to indicate the out-of-level condition. Lock the pendulum to switch to manual mode, you can adjust the lines without self-leveling in the desired orientation.
  • 【FLEXIBLE MAGNETIC SUPPORT】 The Laser Level can be affixed to most metal surfaces with the magnetic retainer (included) or mounted on a 1/4 " - 20 tripod (not included) .The line laser can be rotated 360 degrees and one Project red laser cross line at any position or angle.
  • 【20H BATTERY LIFE AND WIDE APPLICATIONS】 Over 20 hours battery life with continuous use. Suitable for wide uses: such as paving tiles, installing carpentry for doors, windows or furniture, hanging wallpaper, etc. But not suitable for outdoor use.
  • 【WHAT YOU GET】 1 x HYCHIKA Line Laser, 1 x Magnetic L Mount, 1x Carrying Case, 2 x AA Batteries, 1 x User Manual
DISCOUNTBest
ELEGOO Mars Pro MSLA 3D Printer UV Photocuring LCD 3D Printer with Matrix UV LED Light Source, Built-In Activated Carbon,Off-Line Print 4.53in(L) x 2.56in(W) x 5.9in(H) Printing Size
  • 【Higher Precision and Excellent Performance】Z axis utilizes linear guideway structure, which achieves steadier motion and greatly enhanced moving accuracy to reduce the layer lines on the 3D printed model and make the surface much smoother. The set screws of the build plate are now upgraded to larger anti-slip hexagon socket screws, which have a more stable leveling result. CNC turning CD pattern on the build plate provides a much stronger adherence, especially when printing large 3D models.
  • 【No Irritative Odor Experience】Mars Pro comes with a silicone rubber seal that can be put on the cover to prevent the resin odor from leaking. Built-in activated carbon can absorb and filter the resin odor before they are ventilated throughout the cooling fan, which gives you a fresh and safe user experience.
  • 【Light and Convenient 】Remodeled resin vat made of aluminum alloy is light yet sturdy. The USB port is relocated to the front for your convenience. Mars Pro uses a new user interface with a dark theme and simple design.
  • 【Qulity Prints and Consistent Success】Matrix light source consists of 28 50Watt UV LED lights that have uniform light emission, ensuring superior printing results, a more accurate printing size, and saves your time by 25% in layer exposure time. Mars Pro is the first resin-based 3D printer to use the sliced file of .ctb format, which reduces the file size by an average of 90% compared to .cbddlp format and significantly increases the printing success rate when printing bigger models.
  • 【Warranty and Privilege 】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded). Parts and replacements will be shipped from the overseas warehouse to offer you quality and fast customer service.
DISCOUNTBest
Creality 3D Ender-3 3D Printer DIY Easy-assemble 220 * 220 * 250mm Printing Size with Resume Printing Support PLA, ABS, TPU
  • High-precision 3D printer with ±0.1mm high printing accuracy, 220 * 220 * 250mm large printing size with one-piece structure, saving space but building the world.
  • MK-8 extruder greatly reduces plugging risk and bad extrustion; and the hotbed can reach 110℃ in about 5 minutes to meet the needs of fast heating and printing.
  • Safely protected power supply and resume printing function, if the machine is shut down or power failure accidentally, it can continue printing after power on.
  • Compatible with various 1.75mm printing filaments like PLA, ABS, TPU, etc; wide applications, can be used for product structure design, toy modeling, architectural design, parts manufacturing, etc.
  • CNC machining of Y-rail mounting groove to make sure precise positioning and keep the stable frame with high-precision printing quality. Adopts V-socket linear bearing system and wheel moving parts, super noiseless and smooth printing performance; big hand twist nut make the print platform easier to level.
Best
Creality Ender 3 3D Printer, Aluminum DIY Fully Open Source with Resume Printing Function 220x220x250mm
  • E Axis working: The E axis motor will start work when the nozzle temperature reaches over 185℃, then before starting printing, please remember to heat the nozzle temperature first.
  • Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs can be assembled in just 2 hours.
  • Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
  • Strict Test: Strict testing for key components before delivery and life-time technical supports available.
  • Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110℃.
Best
Xerox Phaser 6510n A4 Colour LED / Laser Printer, USB and Ethernet Connected, White/Blue
  • COMPACT DESIGN, QUIET OPERATION – Pantone Colour approved LED/laser printer ideal for work teams of up to 7 people
  • INNOVATIVE COLOUR PERFORMANCE – With Xerox colour correction technology, print up to 28ppm A4 in mono and colour
  • PRINTING FEATURES – Including fit to page, scaling, booklet printing, secure printing and more
  • HIGH-QUALITY PRINTS – Crisp, clear text and graphics with a printing resolution of 1200 x 2400 dpi image quality
  • CONNECTIVITY OPTIONS – Print directly from high-speed USB 3.0 or from your laptop or PC with 10/100/1000Base-T Ethernet Cable

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Selective laser sintering 3d printer

Here is the ranking of the best Selective laser sintering 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Selective laser sintering 3d printer and read the reviews left by real customers, see the Selective laser sintering 3d printer ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Selective laser sintering 3d printer New
BIGTREETECH MMU2 DIP Filament PLA Select filament consumable port 5 colors Support TMC2209/TMC5160 Apply to prusa i3 MK3S/MK2.5S 3D Printer
  • 1. Firmware link: https://github.com/bigtreetech.
  • 2. Master chip:STM32F030C8T6.
  • 3. Used to select consumables port, Support up to 5 color printing and multiple driver models.
  • 4. Driver modes: TMC Driver-UART Mode / Driver-SPI Mode.
  • 5. 24-hour service: Don't worry about after-sales problems, please contact us if necessary, we will solve it for you.
Selective laser sintering 3d printer New
Laserland T3G Laser Safety Glasses 190-550nm 800-1100nm 405nm 450nm Green Blue Light Protection Nd:Yag 190-550nm 800-1100nm Infrared Tattoo Removal Fibre Laser 1070nm 1080nm
  • Protection values: 190-550nm & 800-1100nm DLB 6 IR LB 6 & OD4+, OD6+ & VLT: 30%
  • Application: YAG 532nm 1064nm, fibre laser 1070nm, 1080nm, laser cutting system
  • Certification: CE certified DIN EN 207
  • Especially suitable for laser wavelengths: 532nm, 980nm, 1064nm, 1070nm, 1080nm, 1100nm
  • Laser safety glasses come with black case
Selective laser sintering 3d printer New
AMX3d Pro Grade 3D Printer Tool Kit - All The 3D Printing Tools & Accessories Needed to Remove, Clean & Finish 3D Prints (.
  • THE ESSENTIAL TOOLS FOR 3D PRINTING: Our kit has everything you need to remove, clean & finish 3D printed models in one convenient toolkit – an essential addition to any 3D printing system.
  • EASY CLEANING: Clean your 3D prints, so they look like the pro prints on the 3D Printer Box! A 25 piece kit with 17 different knife blades, long tweezers, needle nose pliers and glue stick.
  • SIMPLE REMOVAL: Get your 3D prints off the print bed without damaging either! Slide one of the 3 removal tools under your print and lift (don’t pry) your prints away.
  • PERFECT FINISH: The 3 piece / 6 Tool precision scraper / pick / knife blade combo tools get into the smallest crevices to perfectly finish your print.
  • QUALITY: The Best Prints Start With The Best Tools! Choose either the Pro Grade or the Pro Grade PLUS. AMX3d provides 3D printing supplies of the highest quality.
Selective laser sintering 3d printer New
ANYCUBIC 3D Printer Mega Zero V2 Fast Assemble & Heating Auxiliary Leveling FDM Printer with Magnetic Printing Bed and Resume Printing 220x220x250mm Support PLA, TPU, WOOD, PETG
  • Easy assembly and fast printing:ANYCUBIC MEGA ZERO 2.0 Printing Size: 220mm*220mm*250mm; Smaller and lighter body, but bigger print volume than ANYCUBIC I3 MEGA S. Semi-assembly kit easy to assemble, save time and get started quickly
  • Magnetic stickers: Mega zero 2.0 adopts magnetic stickers, which can be reused without masking paper or glue, which is convenient for taking molds. After the model is cooled, bend the sticker to remove the model
  • Powerful Extruder:Strong extruder provides a better printing experience. Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print 1,75mm Materials: TPU, PLA, ABS,HIPS, WOOD etc
  • Fast heating UP: 3d printing Mega zero 2.0 only needs to heat up for 5 minutes, the hot bed can reach 100℃, which improves the printing efficiency, it can reach 100℃ within 5 minutes, which is convenient and fast
  • After Sale Service: All of our 3d printers provide one month free return and exchange, one year warranty (exclude consumable parts like printer head & platform bed) and lifetime technical support, If you encounter any problems, please feel free contact us
Selective laser sintering 3d printer New
No-Branded 3d Printer XY-2 Fast Assembly Full Metal 3D Printer 220 * 220 * 260mm High Printing Magnetic Heat Paper 3.5 Inches Touch Screen
  • It is easy to operate. If you have any question about the product and operations, you can contact with us. We staff will reply you within 24 hours. It is the best honor to serve you.
  • Four steps to instal : No difficult assembly required! A four-piece, set makes for easy installation.
  • Power failure resume print : When the power is cut off unexpectedly, the printer will automatically remember the current position
  • and store the printing data, reduce the working platform and pull back filament.
  • When the power is restored, the printer will continue to print from the breakpoint, supporting the automatic termination of the task during the printing process.
Selective laser sintering 3d printer New
Creality CR-6 SE Leveling-Free Starter FDM 3D Printer, Auto Bed Leveling, Five-Minute Assembly, TMC2209 Drivers, Enhanced Heatsink and Extruder, 4.3 Inch Touchscreen, Build Volume 235 x 235 x 250mm
  • Ease of Use: Five-minute assembly, plus with an auto bed leveling system, the CR-6 SE brings you an unrivaled out of box experience.
  • A Quiet Beast: 32 bit silent motherboard, Atmega2560 control chip, and 24V 350W MeanWell power supply enables the CR-6 SE to heat up quickly and consistently with reduced noise.
  • Pro Performance: robust aluminum frame, dual lead screws and adjustable timing belt contribute to delivering a smoother print finish of the prints.
  • Quality of Life Addons: Flexible hotbed clips, foldable filament holder for easy storage, stepper motor covers deliver a cleaner look.
  • Smooth Printing Experience: The Newly-Designed Extruder on the CR-6 SE allows for a quick and painless filament feeding and the carborundum glass bed for better adhesion and easier removal, together with the filament run-out sensor and resume printing function will keep you printing, not troubleshooting problems.
Selective laser sintering 3d printer New
ANYCUBIC Mega Pro 3D Printer, with 3D Printing & Laser Engraving 2 in 1, 210×210×205mm (Print Size)& 220×140mm(Engraving Size), Support 1.75mm PLA Filament
  • Multi-function 3D Printer: ANYCUBIC Mega Pro FDM 3D Printer Integrate the functions of 3d printing and laser engraving. Multiple functions to unleash your creative potential. Printing Size: 210 x 210 x 205mm; Engraving size: 220×140 mm. Laser engraving can be used in various fields, such as Decoration, Personalized custom, Art design, etc.
  • Multi-color Printing: The Mega Pro FDM 3D Printer can offer the option to print with a colorful model on a single nozzle by pausing at a specific layer Seamless Connection. (Pause up to 6 times)
  • Smart Auxiliary Leveling: The Mega Pro 3D Printer can automatically locate the leveling spot of the print platform and beep alert to precise print head height during leveling.
  • Full Rigid Solid Metal Frame & Modular Design: The ANYCUBIC Mega Pro 3D Printer has sturdy construction enhances the stability when printing which leads to highly detailed prints. With a modular design, it can be assembled in just a few minutes.
  • More Function: 1)The Mega Pro 3D Printer has TFT Touch Screen-As responsive as operating on the phone. 2)All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours of professional customer service.
Selective laser sintering 3d printer New
ANYCUBIC 3D Printer MEGA X Large Size FDM 3D Printer with Resume Print and Removable UltraBase Hotbed Platform with Free 1kg PLA Filament, Support PLA, ABS, TPU,Build Size 300X300X305mm
  • Quick Assembly: 3 steps to set up the printer with fix 12 screws and 3 cables within minutes not only to an expert user but also to beginner.
  • Large Build Volume: ANYCUBIC large 3D printer mega X comes with larger build spaces available. At 300*300*305mm, able to print models that 90% of other 3d printers could not. More space for fulfilling your fantastic idea.
  • Resume Print: One click to resume from the last recorded position when suffered power outages, no more worries about accident power off.Support print 1.75mm materials: TPU, PLA, ABS, HIPS, WOOD etc.
  • Ultrabase Platform: The MEGA X platform is covered a layer of patented microporous to provide excellent adhesion. And easy to take off the model from the platform after it cool down. It can be repeatedly used without sacrificing performance.
  • After Sale Service: All of our 3d printers provide one month free return and exchange, one year warranty (exclude consumable parts like printer head & platform bed) and lifetime technical support, If you encounter any problems, please feel free contact us
Selective laser sintering 3d printer New
SHENLIJUAN 3D Printer CR-10 V3 With BL Touch Auto-Level Touch Screen Large Build Volume 3D Printer 300mmx300mmx400mm With Capricorn PTFE 2020 Newest Printer
  • Strong Compatibility Auto & Manual Leveling:BL touch (Auto Leveling Device) can be added by yourself,enjoying more fun of DIY your own 3d printer.
  • Dual Port Fan Cooling Plenum:Dual-port cooling fan extruder, Evenly heat- dissipated and coaling dawn immediately. reducing plugging and poor- spillage ensures models with high quality.
  • A New Tough All Metal Frame: High quality V Profile selected, more stable without any vibration,smoothly printed-out with high accuracy.
  • Upgraded Ultra Silent Mother Board: Self-developed Industrial-grade Motherboard and TMC2208 Utra Silent Drive are adopted /Cost-effective /Running more stable/ Noise reduction /Compression resistance.

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Selective laser sintering 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Selective laser sintering 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

SHENLIJUAN 3D Printer CR-10 V3 With BL Touch Auto-Level Touch Screen Large Build Volume 3D Printer 300mmx300mmx400mm With Capricorn PTFE 2020 Newest Printer
  • Strong Compatibility Auto & Manual Leveling:BL touch (Auto Leveling Device) can be added by yourself,enjoying more fun of DIY your own 3d printer.
  • Dual Port Fan Cooling Plenum:Dual-port cooling fan extruder, Evenly heat- dissipated and coaling dawn immediately. reducing plugging and poor- spillage ensures models with high quality.
  • A New Tough All Metal Frame: High quality V Profile selected, more stable without any vibration,smoothly printed-out with high accuracy.
  • Upgraded Ultra Silent Mother Board: Self-developed Industrial-grade Motherboard and TMC2208 Utra Silent Drive are adopted /Cost-effective /Running more stable/ Noise reduction /Compression resistance.
Laserland T3G Laser Safety Glasses 190-550nm 800-1100nm 405nm 450nm Green Blue Light Protection Nd:Yag 190-550nm 800-1100nm Infrared Tattoo Removal Fibre Laser 1070nm 1080nm
  • Protection values: 190-550nm & 800-1100nm DLB 6 IR LB 6 & OD4+, OD6+ & VLT: 30%
  • Application: YAG 532nm 1064nm, fibre laser 1070nm, 1080nm, laser cutting system
  • Certification: CE certified DIN EN 207
  • Especially suitable for laser wavelengths: 532nm, 980nm, 1064nm, 1070nm, 1080nm, 1100nm
  • Laser safety glasses come with black case
No-Branded 3d Printer XY-2 Fast Assembly Full Metal 3D Printer 220 * 220 * 260mm High Printing Magnetic Heat Paper 3.5 Inches Touch Screen
  • It is easy to operate. If you have any question about the product and operations, you can contact with us. We staff will reply you within 24 hours. It is the best honor to serve you.
  • Four steps to instal : No difficult assembly required! A four-piece, set makes for easy installation.
  • Power failure resume print : When the power is cut off unexpectedly, the printer will automatically remember the current position
  • and store the printing data, reduce the working platform and pull back filament.
  • When the power is restored, the printer will continue to print from the breakpoint, supporting the automatic termination of the task during the printing process.
BIGTREETECH MMU2 DIP Filament PLA Select filament consumable port 5 colors Support TMC2209/TMC5160 Apply to prusa i3 MK3S/MK2.5S 3D Printer
  • 1. Firmware link: https://github.com/bigtreetech.
  • 2. Master chip:STM32F030C8T6.
  • 3. Used to select consumables port, Support up to 5 color printing and multiple driver models.
  • 4. Driver modes: TMC Driver-UART Mode / Driver-SPI Mode.
  • 5. 24-hour service: Don't worry about after-sales problems, please contact us if necessary, we will solve it for you.
ANYCUBIC 3D Printer Mega Zero V2 Fast Assemble & Heating Auxiliary Leveling FDM Printer with Magnetic Printing Bed and Resume Printing 220x220x250mm Support PLA, TPU, WOOD, PETG
  • Easy assembly and fast printing:ANYCUBIC MEGA ZERO 2.0 Printing Size: 220mm*220mm*250mm; Smaller and lighter body, but bigger print volume than ANYCUBIC I3 MEGA S. Semi-assembly kit easy to assemble, save time and get started quickly
  • Magnetic stickers: Mega zero 2.0 adopts magnetic stickers, which can be reused without masking paper or glue, which is convenient for taking molds. After the model is cooled, bend the sticker to remove the model
  • Powerful Extruder:Strong extruder provides a better printing experience. Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print 1,75mm Materials: TPU, PLA, ABS,HIPS, WOOD etc
  • Fast heating UP: 3d printing Mega zero 2.0 only needs to heat up for 5 minutes, the hot bed can reach 100℃, which improves the printing efficiency, it can reach 100℃ within 5 minutes, which is convenient and fast
  • After Sale Service: All of our 3d printers provide one month free return and exchange, one year warranty (exclude consumable parts like printer head & platform bed) and lifetime technical support, If you encounter any problems, please feel free contact us

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Selective laser sintering 3d printer actually costs.

DISCOUNTLatest Selective laser sintering 3d printer
Laser Level, HYCHIKA 15M Self-Leveling Line Laser with Double Laser Module, 360 ° Laser with 2 Lines Horizontal/Vertical, Flexible Magnetic Base, Bag and 2 x AA Batteries Included
  • 【DOUBLE LASER MODULE】 The Laser Level has Dual Laser Module that satisfies your different needs, you can toggle between vertical & horizontal lines, in addition, it has higher brightness and lower energy consumption.
  • 【SELF-LEVELING WITHIN WITHIN 4 °】 Unlock the pendulum, inclination angle ≤4 °, the laser is automatically leveled. Otherwise, the laser flashes to indicate the out-of-level condition. Lock the pendulum to switch to manual mode, you can adjust the lines without self-leveling in the desired orientation.
  • 【FLEXIBLE MAGNETIC SUPPORT】 The Laser Level can be affixed to most metal surfaces with the magnetic retainer (included) or mounted on a 1/4 " - 20 tripod (not included) .The line laser can be rotated 360 degrees and one Project red laser cross line at any position or angle.
  • 【20H BATTERY LIFE AND WIDE APPLICATIONS】 Over 20 hours battery life with continuous use. Suitable for wide uses: such as paving tiles, installing carpentry for doors, windows or furniture, hanging wallpaper, etc. But not suitable for outdoor use.
  • 【WHAT YOU GET】 1 x HYCHIKA Line Laser, 1 x Magnetic L Mount, 1x Carrying Case, 2 x AA Batteries, 1 x User Manual
Latest Selective laser sintering 3d printer
ANYCUBIC 3D Printer Mega Zero V2 Fast Assemble & Heating Auxiliary Leveling FDM Printer with Magnetic Printing Bed and Resume Printing 220x220x250mm Support PLA, TPU, WOOD, PETG
  • Easy assembly and fast printing:ANYCUBIC MEGA ZERO 2.0 Printing Size: 220mm*220mm*250mm; Smaller and lighter body, but bigger print volume than ANYCUBIC I3 MEGA S. Semi-assembly kit easy to assemble, save time and get started quickly
  • Magnetic stickers: Mega zero 2.0 adopts magnetic stickers, which can be reused without masking paper or glue, which is convenient for taking molds. After the model is cooled, bend the sticker to remove the model
  • Powerful Extruder:Strong extruder provides a better printing experience. Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print 1,75mm Materials: TPU, PLA, ABS,HIPS, WOOD etc
  • Fast heating UP: 3d printing Mega zero 2.0 only needs to heat up for 5 minutes, the hot bed can reach 100℃, which improves the printing efficiency, it can reach 100℃ within 5 minutes, which is convenient and fast
  • After Sale Service: All of our 3d printers provide one month free return and exchange, one year warranty (exclude consumable parts like printer head & platform bed) and lifetime technical support, If you encounter any problems, please feel free contact us
Latest Selective laser sintering 3d printer
Creality Ender 3 Pro 3D Printers with Printing Resume Big Volume 220 * 220 * 250mm Flexible Removable Hotbed Building Surface
  • [MeanWell Power Supply] - We adopt the MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • [More Stable] - Redesigned with a much more sturdy, 40x40 aluminum extrusion for the Y-axis base. This provides stability for the printing process, leading to better print quality.
  • [Superior Printing Surface] - A new state of the art “C-MAG” magnetic sticker is designed for Ender 3 Pro, it is entirely removable, flexible and can better adhere to the platform. Once the model is finished printing, remove the magnetic upper from the lower and bend or flex the print surface to watch the model effortlessly pop off the printing surface.
  • [Enriched Accessories] - It must be surprising that more useful accessories included in our package. Extra parts can save you time while you need, also cost-effective.
DISCOUNTLatest Selective laser sintering 3d printer
ELEGOO Mars Pro MSLA 3D Printer UV Photocuring LCD 3D Printer with Matrix UV LED Light Source, Built-In Activated Carbon,Off-Line Print 4.53in(L) x 2.56in(W) x 5.9in(H) Printing Size
  • 【Higher Precision and Excellent Performance】Z axis utilizes linear guideway structure, which achieves steadier motion and greatly enhanced moving accuracy to reduce the layer lines on the 3D printed model and make the surface much smoother. The set screws of the build plate are now upgraded to larger anti-slip hexagon socket screws, which have a more stable leveling result. CNC turning CD pattern on the build plate provides a much stronger adherence, especially when printing large 3D models.
  • 【No Irritative Odor Experience】Mars Pro comes with a silicone rubber seal that can be put on the cover to prevent the resin odor from leaking. Built-in activated carbon can absorb and filter the resin odor before they are ventilated throughout the cooling fan, which gives you a fresh and safe user experience.
  • 【Light and Convenient 】Remodeled resin vat made of aluminum alloy is light yet sturdy. The USB port is relocated to the front for your convenience. Mars Pro uses a new user interface with a dark theme and simple design.
  • 【Qulity Prints and Consistent Success】Matrix light source consists of 28 50Watt UV LED lights that have uniform light emission, ensuring superior printing results, a more accurate printing size, and saves your time by 25% in layer exposure time. Mars Pro is the first resin-based 3D printer to use the sliced file of .ctb format, which reduces the file size by an average of 90% compared to .cbddlp format and significantly increases the printing success rate when printing bigger models.
  • 【Warranty and Privilege 】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded). Parts and replacements will be shipped from the overseas warehouse to offer you quality and fast customer service.
Latest Selective laser sintering 3d printer
ANYCUBIC Mega Pro 3D Printer, with 3D Printing & Laser Engraving 2 in 1, 210×210×205mm (Print Size)& 220×140mm(Engraving Size), Support 1.75mm PLA Filament
  • Multi-function 3D Printer: ANYCUBIC Mega Pro FDM 3D Printer Integrate the functions of 3d printing and laser engraving. Multiple functions to unleash your creative potential. Printing Size: 210 x 210 x 205mm; Engraving size: 220×140 mm. Laser engraving can be used in various fields, such as Decoration, Personalized custom, Art design, etc.
  • Multi-color Printing: The Mega Pro FDM 3D Printer can offer the option to print with a colorful model on a single nozzle by pausing at a specific layer Seamless Connection. (Pause up to 6 times)
  • Smart Auxiliary Leveling: The Mega Pro 3D Printer can automatically locate the leveling spot of the print platform and beep alert to precise print head height during leveling.
  • Full Rigid Solid Metal Frame & Modular Design: The ANYCUBIC Mega Pro 3D Printer has sturdy construction enhances the stability when printing which leads to highly detailed prints. With a modular design, it can be assembled in just a few minutes.
  • More Function: 1)The Mega Pro 3D Printer has TFT Touch Screen-As responsive as operating on the phone. 2)All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours of professional customer service.
Latest Selective laser sintering 3d printer
Kacsoo Newest Version DIY CNC Laser Engraver Kits,40x50cm,2 Axis (2500MW) DIY CNC Laser Engraver Kits 12V USB Desktop Laser Engraving Machine Wood Carving Engraving Cutting
  • 【Ultra large Engraving Area】compatible with Windows and XP series,Not compatible with mac . 40X50cm ultra large engraving area,gantry shape design, no engraving height limitation
  • 【Entertainment Assistant】This DIY desktop blue (blue purple) laser engraving machine is ideal for amateur laser engraving usage with grayscale printing,low-light positioning and freedom positioning functions Support windows 7,8,10.
  • 【Structural Design 】Construction-Body Aluminum + Acrylic, Voltage-12V/5A/110~240V, Engraving area-40x50cm, Laser power- 2500MW
  • 【High speed operation, Clear analysis】Two stepper motor impulses that provide a fast moving speed. This website provides a detailed video of installation and operation of this CNC.also include Software download adress, Other products on the website can also be found in our store. Website address: http://bachinmaker.com/wiki/doku.php?id=start
  • 【Wide range of Applications】Can be processed material Wood, plastic, paper, bamboo, horns, a little leather (wallet), plastic phone shell, rubber chapter, photosensitive chapter, sponge paper
Latest Selective laser sintering 3d printer
Samsung Xpress M2026W A4 Mono Wireless, Black & White Laser Printer (20 ppm)
  • Print with minimal noise levels
  • Work faster with One Touch Screen Print
  • Power consumption : 310 watts (Printing) . 1.9 watts (Power Save) . 30 watts (Ready)
  • Print in less than 8.5 seconds with Ready Mode
  • WPS, Mobile Print, NFC
Latest Selective laser sintering 3d printer
ANYCUBIC 3D Printer MEGA X Large Size FDM 3D Printer with Resume Print and Removable UltraBase Hotbed Platform with Free 1kg PLA Filament, Support PLA, ABS, TPU,Build Size 300X300X305mm
  • Quick Assembly: 3 steps to set up the printer with fix 12 screws and 3 cables within minutes not only to an expert user but also to beginner.
  • Large Build Volume: ANYCUBIC large 3D printer mega X comes with larger build spaces available. At 300*300*305mm, able to print models that 90% of other 3d printers could not. More space for fulfilling your fantastic idea.
  • Resume Print: One click to resume from the last recorded position when suffered power outages, no more worries about accident power off.Support print 1.75mm materials: TPU, PLA, ABS, HIPS, WOOD etc.
  • Ultrabase Platform: The MEGA X platform is covered a layer of patented microporous to provide excellent adhesion. And easy to take off the model from the platform after it cool down. It can be repeatedly used without sacrificing performance.
  • After Sale Service: All of our 3d printers provide one month free return and exchange, one year warranty (exclude consumable parts like printer head & platform bed) and lifetime technical support, If you encounter any problems, please feel free contact us
DISCOUNTLatest Selective laser sintering 3d printer
Creality 3D Ender-3 3D Printer DIY Easy-assemble 220 * 220 * 250mm Printing Size with Resume Printing Support PLA, ABS, TPU
  • High-precision 3D printer with ±0.1mm high printing accuracy, 220 * 220 * 250mm large printing size with one-piece structure, saving space but building the world.
  • MK-8 extruder greatly reduces plugging risk and bad extrustion; and the hotbed can reach 110℃ in about 5 minutes to meet the needs of fast heating and printing.
  • Safely protected power supply and resume printing function, if the machine is shut down or power failure accidentally, it can continue printing after power on.
  • Compatible with various 1.75mm printing filaments like PLA, ABS, TPU, etc; wide applications, can be used for product structure design, toy modeling, architectural design, parts manufacturing, etc.
  • CNC machining of Y-rail mounting groove to make sure precise positioning and keep the stable frame with high-precision printing quality. Adopts V-socket linear bearing system and wheel moving parts, super noiseless and smooth printing performance; big hand twist nut make the print platform easier to level.

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Selective laser sintering 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Selective laser sintering 3d printer which are among the cheapest on the market. Just scroll through the list to find Selective laser sintering 3d printer the cheapest products.

Catalog

The product Selective laser sintering 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.

Selective laser sintering 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Selective laser sintering 3d printer New
BIGTREETECH MMU2 DIP Filament PLA Select filament consumable port 5 colors Support TMC2209/TMC5160 Apply to prusa i3 MK3S/MK2.5S 3D Printer
  • 1. Firmware link: https://github.com/bigtreetech.
  • 2. Master chip:STM32F030C8T6.
  • 3. Used to select consumables port, Support up to 5 color printing and multiple driver models.
  • 4. Driver modes: TMC Driver-UART Mode / Driver-SPI Mode.
  • 5. 24-hour service: Don't worry about after-sales problems, please contact us if necessary, we will solve it for you.
Selective laser sintering 3d printer New
Laserland T3G Laser Safety Glasses 190-550nm 800-1100nm 405nm 450nm Green Blue Light Protection Nd:Yag 190-550nm 800-1100nm Infrared Tattoo Removal Fibre Laser 1070nm 1080nm
  • Protection values: 190-550nm & 800-1100nm DLB 6 IR LB 6 & OD4+, OD6+ & VLT: 30%
  • Application: YAG 532nm 1064nm, fibre laser 1070nm, 1080nm, laser cutting system
  • Certification: CE certified DIN EN 207
  • Especially suitable for laser wavelengths: 532nm, 980nm, 1064nm, 1070nm, 1080nm, 1100nm
  • Laser safety glasses come with black case
Selective laser sintering 3d printer New
AMX3d Pro Grade 3D Printer Tool Kit - All The 3D Printing Tools & Accessories Needed to Remove, Clean & Finish 3D Prints (.
  • THE ESSENTIAL TOOLS FOR 3D PRINTING: Our kit has everything you need to remove, clean & finish 3D printed models in one convenient toolkit – an essential addition to any 3D printing system.
  • EASY CLEANING: Clean your 3D prints, so they look like the pro prints on the 3D Printer Box! A 25 piece kit with 17 different knife blades, long tweezers, needle nose pliers and glue stick.
  • SIMPLE REMOVAL: Get your 3D prints off the print bed without damaging either! Slide one of the 3 removal tools under your print and lift (don’t pry) your prints away.
  • PERFECT FINISH: The 3 piece / 6 Tool precision scraper / pick / knife blade combo tools get into the smallest crevices to perfectly finish your print.
  • QUALITY: The Best Prints Start With The Best Tools! Choose either the Pro Grade or the Pro Grade PLUS. AMX3d provides 3D printing supplies of the highest quality.
Selective laser sintering 3d printer New
ANYCUBIC 3D Printer Mega Zero V2 Fast Assemble & Heating Auxiliary Leveling FDM Printer with Magnetic Printing Bed and Resume Printing 220x220x250mm Support PLA, TPU, WOOD, PETG
  • Easy assembly and fast printing:ANYCUBIC MEGA ZERO 2.0 Printing Size: 220mm*220mm*250mm; Smaller and lighter body, but bigger print volume than ANYCUBIC I3 MEGA S. Semi-assembly kit easy to assemble, save time and get started quickly
  • Magnetic stickers: Mega zero 2.0 adopts magnetic stickers, which can be reused without masking paper or glue, which is convenient for taking molds. After the model is cooled, bend the sticker to remove the model
  • Powerful Extruder:Strong extruder provides a better printing experience. Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print 1,75mm Materials: TPU, PLA, ABS,HIPS, WOOD etc
  • Fast heating UP: 3d printing Mega zero 2.0 only needs to heat up for 5 minutes, the hot bed can reach 100℃, which improves the printing efficiency, it can reach 100℃ within 5 minutes, which is convenient and fast
  • After Sale Service: All of our 3d printers provide one month free return and exchange, one year warranty (exclude consumable parts like printer head & platform bed) and lifetime technical support, If you encounter any problems, please feel free contact us
Selective laser sintering 3d printer New
No-Branded 3d Printer XY-2 Fast Assembly Full Metal 3D Printer 220 * 220 * 260mm High Printing Magnetic Heat Paper 3.5 Inches Touch Screen
  • It is easy to operate. If you have any question about the product and operations, you can contact with us. We staff will reply you within 24 hours. It is the best honor to serve you.
  • Four steps to instal : No difficult assembly required! A four-piece, set makes for easy installation.
  • Power failure resume print : When the power is cut off unexpectedly, the printer will automatically remember the current position
  • and store the printing data, reduce the working platform and pull back filament.
  • When the power is restored, the printer will continue to print from the breakpoint, supporting the automatic termination of the task during the printing process.
Selective laser sintering 3d printer New
Creality CR-6 SE Leveling-Free Starter FDM 3D Printer, Auto Bed Leveling, Five-Minute Assembly, TMC2209 Drivers, Enhanced Heatsink and Extruder, 4.3 Inch Touchscreen, Build Volume 235 x 235 x 250mm
  • Ease of Use: Five-minute assembly, plus with an auto bed leveling system, the CR-6 SE brings you an unrivaled out of box experience.
  • A Quiet Beast: 32 bit silent motherboard, Atmega2560 control chip, and 24V 350W MeanWell power supply enables the CR-6 SE to heat up quickly and consistently with reduced noise.
  • Pro Performance: robust aluminum frame, dual lead screws and adjustable timing belt contribute to delivering a smoother print finish of the prints.
  • Quality of Life Addons: Flexible hotbed clips, foldable filament holder for easy storage, stepper motor covers deliver a cleaner look.
  • Smooth Printing Experience: The Newly-Designed Extruder on the CR-6 SE allows for a quick and painless filament feeding and the carborundum glass bed for better adhesion and easier removal, together with the filament run-out sensor and resume printing function will keep you printing, not troubleshooting problems.
Selective laser sintering 3d printer New
ANYCUBIC Mega Pro 3D Printer, with 3D Printing & Laser Engraving 2 in 1, 210×210×205mm (Print Size)& 220×140mm(Engraving Size), Support 1.75mm PLA Filament
  • Multi-function 3D Printer: ANYCUBIC Mega Pro FDM 3D Printer Integrate the functions of 3d printing and laser engraving. Multiple functions to unleash your creative potential. Printing Size: 210 x 210 x 205mm; Engraving size: 220×140 mm. Laser engraving can be used in various fields, such as Decoration, Personalized custom, Art design, etc.
  • Multi-color Printing: The Mega Pro FDM 3D Printer can offer the option to print with a colorful model on a single nozzle by pausing at a specific layer Seamless Connection. (Pause up to 6 times)
  • Smart Auxiliary Leveling: The Mega Pro 3D Printer can automatically locate the leveling spot of the print platform and beep alert to precise print head height during leveling.
  • Full Rigid Solid Metal Frame & Modular Design: The ANYCUBIC Mega Pro 3D Printer has sturdy construction enhances the stability when printing which leads to highly detailed prints. With a modular design, it can be assembled in just a few minutes.
  • More Function: 1)The Mega Pro 3D Printer has TFT Touch Screen-As responsive as operating on the phone. 2)All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours of professional customer service.
Selective laser sintering 3d printer New
ANYCUBIC 3D Printer MEGA X Large Size FDM 3D Printer with Resume Print and Removable UltraBase Hotbed Platform with Free 1kg PLA Filament, Support PLA, ABS, TPU,Build Size 300X300X305mm
  • Quick Assembly: 3 steps to set up the printer with fix 12 screws and 3 cables within minutes not only to an expert user but also to beginner.
  • Large Build Volume: ANYCUBIC large 3D printer mega X comes with larger build spaces available. At 300*300*305mm, able to print models that 90% of other 3d printers could not. More space for fulfilling your fantastic idea.
  • Resume Print: One click to resume from the last recorded position when suffered power outages, no more worries about accident power off.Support print 1.75mm materials: TPU, PLA, ABS, HIPS, WOOD etc.
  • Ultrabase Platform: The MEGA X platform is covered a layer of patented microporous to provide excellent adhesion. And easy to take off the model from the platform after it cool down. It can be repeatedly used without sacrificing performance.
  • After Sale Service: All of our 3d printers provide one month free return and exchange, one year warranty (exclude consumable parts like printer head & platform bed) and lifetime technical support, If you encounter any problems, please feel free contact us
Selective laser sintering 3d printer New
SHENLIJUAN 3D Printer CR-10 V3 With BL Touch Auto-Level Touch Screen Large Build Volume 3D Printer 300mmx300mmx400mm With Capricorn PTFE 2020 Newest Printer
  • Strong Compatibility Auto & Manual Leveling:BL touch (Auto Leveling Device) can be added by yourself,enjoying more fun of DIY your own 3d printer.
  • Dual Port Fan Cooling Plenum:Dual-port cooling fan extruder, Evenly heat- dissipated and coaling dawn immediately. reducing plugging and poor- spillage ensures models with high quality.
  • A New Tough All Metal Frame: High quality V Profile selected, more stable without any vibration,smoothly printed-out with high accuracy.
  • Upgraded Ultra Silent Mother Board: Self-developed Industrial-grade Motherboard and TMC2208 Utra Silent Drive are adopted /Cost-effective /Running more stable/ Noise reduction /Compression resistance.

Where to buy?

If you are asking yourself where to buy Selective laser sintering 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Selective laser sintering 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Selective laser sintering 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Selective laser sintering 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Selective laser sintering 3d printer used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Selective laser sintering 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

SHENLIJUAN 3D Printer CR-10 V3 With BL Touch Auto-Level Touch Screen Large Build Volume 3D Printer 300mmx300mmx400mm With Capricorn PTFE 2020 Newest Printer
  • Strong Compatibility Auto & Manual Leveling:BL touch (Auto Leveling Device) can be added by yourself,enjoying more fun of DIY your own 3d printer.
  • Dual Port Fan Cooling Plenum:Dual-port cooling fan extruder, Evenly heat- dissipated and coaling dawn immediately. reducing plugging and poor- spillage ensures models with high quality.
  • A New Tough All Metal Frame: High quality V Profile selected, more stable without any vibration,smoothly printed-out with high accuracy.
  • Upgraded Ultra Silent Mother Board: Self-developed Industrial-grade Motherboard and TMC2208 Utra Silent Drive are adopted /Cost-effective /Running more stable/ Noise reduction /Compression resistance.
Laserland T3G Laser Safety Glasses 190-550nm 800-1100nm 405nm 450nm Green Blue Light Protection Nd:Yag 190-550nm 800-1100nm Infrared Tattoo Removal Fibre Laser 1070nm 1080nm
  • Protection values: 190-550nm & 800-1100nm DLB 6 IR LB 6 & OD4+, OD6+ & VLT: 30%
  • Application: YAG 532nm 1064nm, fibre laser 1070nm, 1080nm, laser cutting system
  • Certification: CE certified DIN EN 207
  • Especially suitable for laser wavelengths: 532nm, 980nm, 1064nm, 1070nm, 1080nm, 1100nm
  • Laser safety glasses come with black case
No-Branded 3d Printer XY-2 Fast Assembly Full Metal 3D Printer 220 * 220 * 260mm High Printing Magnetic Heat Paper 3.5 Inches Touch Screen
  • It is easy to operate. If you have any question about the product and operations, you can contact with us. We staff will reply you within 24 hours. It is the best honor to serve you.
  • Four steps to instal : No difficult assembly required! A four-piece, set makes for easy installation.
  • Power failure resume print : When the power is cut off unexpectedly, the printer will automatically remember the current position
  • and store the printing data, reduce the working platform and pull back filament.
  • When the power is restored, the printer will continue to print from the breakpoint, supporting the automatic termination of the task during the printing process.
BIGTREETECH MMU2 DIP Filament PLA Select filament consumable port 5 colors Support TMC2209/TMC5160 Apply to prusa i3 MK3S/MK2.5S 3D Printer
  • 1. Firmware link: https://github.com/bigtreetech.
  • 2. Master chip:STM32F030C8T6.
  • 3. Used to select consumables port, Support up to 5 color printing and multiple driver models.
  • 4. Driver modes: TMC Driver-UART Mode / Driver-SPI Mode.
  • 5. 24-hour service: Don't worry about after-sales problems, please contact us if necessary, we will solve it for you.
ANYCUBIC 3D Printer Mega Zero V2 Fast Assemble & Heating Auxiliary Leveling FDM Printer with Magnetic Printing Bed and Resume Printing 220x220x250mm Support PLA, TPU, WOOD, PETG
  • Easy assembly and fast printing:ANYCUBIC MEGA ZERO 2.0 Printing Size: 220mm*220mm*250mm; Smaller and lighter body, but bigger print volume than ANYCUBIC I3 MEGA S. Semi-assembly kit easy to assemble, save time and get started quickly
  • Magnetic stickers: Mega zero 2.0 adopts magnetic stickers, which can be reused without masking paper or glue, which is convenient for taking molds. After the model is cooled, bend the sticker to remove the model
  • Powerful Extruder:Strong extruder provides a better printing experience. Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print 1,75mm Materials: TPU, PLA, ABS,HIPS, WOOD etc
  • Fast heating UP: 3d printing Mega zero 2.0 only needs to heat up for 5 minutes, the hot bed can reach 100℃, which improves the printing efficiency, it can reach 100℃ within 5 minutes, which is convenient and fast
  • After Sale Service: All of our 3d printers provide one month free return and exchange, one year warranty (exclude consumable parts like printer head & platform bed) and lifetime technical support, If you encounter any problems, please feel free contact us

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Selective laser sintering 3d printer.

Rating: 3.22 of 5 - 23 votes
1 Star2 Stars3 Stars4 Stars5 Stars (23 votes, average: 3.22 out of 5)
Loading...