Online product reviews and comparisons for S2 3d printer.
Latest S2 3d printer
Comgrow Creality Ender 3 Pro 3D Printer with Glass Plate, Upgrade Cmagnet Build Surface Plate and UL Certified Meanwell Power Supply Build Volume 220x220x250mm
- Upgraded Version: It is an upgraded version of Ender 3, comes with extra glass plate, Cmagnet build surface, and also MeanWell power supply. The Ender 3 Pro boasts the same outstanding performance as the Ender 3, upgraded components make this 3D printer more stable, durable and easier to operate.
- MeanWell Power Supply: Equipped with UL certified MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing.
- Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
- Resume Printing Function: Shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
- What You Get: Ceality Ender 3 Pro 3D pinrter, Glass plate, lifetime technical assistance and 24 hours professional customer service.
Latest S2 3d printer
XT-S1 3D Foldable Printer, 3.5 '' Touch Screen and UL Certified Power Support PVA TPU ABS PLA, FDM DIY Direct Feed Printer 15.7 '' x 15 '' x 18 ''（XT-S1）
- 【HIGH PRECISION】Can perfectly print out the model you want. 3D printer has a compact appearance and a basic open frame design, compact enough to fit any desk. The printing size is 235 * 235 * 25mm, printing capacity is greater.
- 【STABLE USE】The 3D printer can work stably, can work continuously for about 100 hours.The aluminum base plate and glass panel makes the printed product uniform and flat and easy to take out.
- 【TOUCH COLOR SCREEN 】XT-S2 Touch Screen is easy to operate with its brand new friendly UI. Preview the model and printing process on screen, allowing offline printing. Say goodbye to the traditional manual knob screen.
- 【EASY TO ASSEMBLE】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
- 【WARRANTY AND SERVICE】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
Latest S2 3d printer
Comgrow Creality 3D Ender 3 Pro 3D Printer with Cmagnet Build Plateform Surface 220x220x250mm Print Size
- Upgrade Version: This is the upgrade version of Creality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size.
- Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
- Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
- Improved Mechanical Properties:The Ender 3 Pro has been redesigned with a more sturdy, 40×40 aluminum extrusion for the Y-axis base. This should improve the overall stability of the printing surface.
Semi-assembled Kit: several assembled parts This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics. - WHAT CAN WE DO: As an authorised reseller of Creality 3D, we can offer 100% original products for you. And also can offer you professional customer service.
Latest S2 3d printer
Screen replacement kit 5.5 Inch 2560 * 1440 2K LCD Screen LS055R1SX04+ HDMI To MIPI Driver Controller S2.2 Fit For 3d SLA Printer NanoDLP Thingiverse TOS Repair kit replacement screen
- Product Type: Tablet LCD
- Display Size: <7 Inch
- Brand Name:fit for ue月郎
- Hello, dear customer: We will prepare and ship the goods for you immediately after you place the order, and we will send you the best quality products.
Latest S2 3d printer
Screen replacement kit 5.5 Inch 2560 * 1440 2K LCD Screen LS055R1SX04+ HDMI To MIPI Driver Controller S2.2 Fit For 3d SLA Printer NanoDLP Thingiverse TOS Repair kit replacement screen
- Product Type: Tablet LCD
- Display Size: <7 Inch
- Brand Name:fit for ue月郎
- Hello, dear customer: We will prepare and ship the goods for you immediately after you place the order, and we will send you the best quality products.
DISCOUNTLatest S2 3d printer
3D Printing Pen, TECBOSS Intelligent 3D Pen with 2 Pack PLA Filaments, Compatible with PLA & ABS, LCD Display Great Arts Crafts Gift for Kids & Adults
- A Creative Automatic 3D Printing Pen - Helps children to improve spatial thinking, creativity and artistic skills. Designed for creative flat and 3d models, wonderful stress relief and an alternative to mindfulness colouring books. The only limit is your imagination. It is a good partner for you and your children to make art creation.
- Environmentally Friendly Materials - Two modes compatible with 1.75mm PLA and ABS filament. Intelligent 3D Drawing Pen is made from skin-friendly materials, the refills and 3d pen has no strange smells. A green and comfortable way of art life. It is good for the health of your children.
- Speed and Temperature Control - A LCD display with buttons for loading / unloading and adjusting the temperature and speed. 8 different speed options meet all of your needs. You can choose the mode according to your 3d pen refills. The tip of the 3d printer pen would not be clogged when you finished the masterwork.
- LCD DISPLAY - The LCD display will not only show the types of material you’re using (ABS or PLA), but also display the temperature. So it becomes easy and convenient for you to get control of this 3D pen. To avoid blocking, residues are automatically excluded.
- MUCH SAFER - It comes with 2 finger protectors to cover your thumb and index finger to avoid hurting during use. Since the tip of the pen will become hot while the pen’s working, it’s required children should use this pen under adults supervision.
Latest S2 3d printer
Screen replacement kit 5.5 Inch 2560 * 1440 2K LCD Screen LS055R1SX04+ HDMI To MIPI Driver Controller S2.2 Fit For 3d SLA Printer NanoDLP Thingiverse TOS Repair kit replacement screen
- Product Type: Tablet LCD
- Display Size: <7 Inch
- Brand Name:fit for ue月郎
- Hello, dear customer: We will prepare and ship the goods for you immediately after you place the order, and we will send you the best quality products.
Latest S2 3d printer
OLRIKE 45 in 1 Precision Magnetic Screwdrivers Set,S2 Alloy Steels Professional Screwdrivers Bit Set Repair for PC, Laptop, Mobile Phone, Xbox
- 【58 in 1 Precison Screwdriver Sets 】The Precision Screwdriver Bit sets Include Nut Driver/ Hex/ Torx/ Flathead/ Phillips/ Pentalobe/ Tri-Point/ Triangle/ Spanner/ SIM Eject Bit, It is a Multi-Function Tool, 42 Bit Can Easily be Replaced, Suitable for Home Maintenance of Small Products
- 【High Hardness S2 Material】 Screwdriver Set Made of S2 Alloy Steels Carefully Selected, It Average Carbon Content of 0.2% Carbon Structural Steel, Hardness of HRC58-62 , Excellent Strength and Toughness, Effectively Prevent Bit Slipping, Allowing Your Repairs to be Completed Successfully
- 【Strength Magnetic】 Magnetic Screwdriver Set in Well Organised Case, The Strong Magnetic is Better Adsorption of Small Screws, Also Equipped with Activities Rotating Cap, Perfect for Your Maintenance Work
- 【 With Extension Rod and Flexible Hose 】Professional Screwdriver Kit Come with an Extension Rod. A Flexible Shaft is Perfect for Where the Handle is Hard to Reach, Bending of the Hose Can be Used in a Small Space, Helpful to Solve Puzzle About Some Blind Angle Screws.
- 【Wide Range of Applications】Widely Applicable to a Variety of Modern Mobile Phone, TV, Phone, Glasses, CD, VCD, DVD Machines, Communication Equipment
Latest S2 3d printer
Screen replacement kit 5.5 Inch 2560 * 1440 2K LCD Screen LS055R1SX04+ HDMI To MIPI Driver Controller S2.2 Fit For 3d SLA Printer NanoDLP Thingiverse TOS Repair kit replacement screen
- Product Type: Tablet LCD
- Display Size: <7 Inch
- Brand Name:fit for ue月郎
- Hello, dear customer: We will prepare and ship the goods for you immediately after you place the order, and we will send you the best quality products.
Buy S2 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.
Don't miss out on the promotions for S2 3d printer, buy S2 3d printer directly online and enjoy big saving on your purchases.
On this page you will find the list of the best S2 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).
Overview
- Reviews: S2 3d printer
- Pricing: S2 3d printer
- Promotions and Deals: S2 3d printer
- Cost: S2 3d printer
- Catalog: S2 3d printer
- Where to buy: S2 3d printer
- Discount Coupon: S2 3d printer
- Similar Products: S2 3d printer
DISCOUNTBest
3D Printing Pen, TECBOSS Intelligent 3D Pen with 2 Pack PLA Filaments, Compatible with PLA & ABS, LCD Display Great Arts Crafts Gift for Kids & Adults
- A Creative Automatic 3D Printing Pen - Helps children to improve spatial thinking, creativity and artistic skills. Designed for creative flat and 3d models, wonderful stress relief and an alternative to mindfulness colouring books. The only limit is your imagination. It is a good partner for you and your children to make art creation.
- Environmentally Friendly Materials - Two modes compatible with 1.75mm PLA and ABS filament. Intelligent 3D Drawing Pen is made from skin-friendly materials, the refills and 3d pen has no strange smells. A green and comfortable way of art life. It is good for the health of your children.
- Speed and Temperature Control - A LCD display with buttons for loading / unloading and adjusting the temperature and speed. 8 different speed options meet all of your needs. You can choose the mode according to your 3d pen refills. The tip of the 3d printer pen would not be clogged when you finished the masterwork.
- LCD DISPLAY - The LCD display will not only show the types of material you’re using (ABS or PLA), but also display the temperature. So it becomes easy and convenient for you to get control of this 3D pen. To avoid blocking, residues are automatically excluded.
- MUCH SAFER - It comes with 2 finger protectors to cover your thumb and index finger to avoid hurting during use. Since the tip of the pen will become hot while the pen’s working, it’s required children should use this pen under adults supervision.
DISCOUNTBest
LABISTS 3D Printer with Touch Screen 220 x 220 x 250 mm for PLA, ABS Filament, Auto Leveling, Filament Run out Detection, Power Failure Resume Print，Fast Assembly and Fast Print
- Higher Precision on Print: With a nozzle of 0.4mm, the LABISTS 3D printer can print higher precised model. With the hot bed, whose maximun temperature can arrive at 100 ℃, it can print without wrapping and bubble in the surface of the mode and can print with ABS and PLA filament.
- Automatic Leveling: The auto leveling 3d printer has leveling sensor, which is able to automatically adjust the distance between the glassbed and the nozzle in replace of adjusting it by your hand. Save your time in leveling and get more vivid printing quality.
- Resume Printing After Power Failure and Filament Runout: The 3D Printer can resume print from the position it stop when the power is off suddenly and when the filament is run out. Never need to worry about power failure and filament outages. No waste of filament and money.
- 2.8 Inch Full Color Touch Screen: With a 2.8 inch colorful touch screen, the 3D Printer is more simple and convenient to operate. Support automatic feeding and unloading function, easy to solve by feeding and refueling one button
- Fast Assembly within Five Minutes: The 3D Printer comes with several assembled parts. And it only need Several Steps to connect it---connect the metal frame, the printer head and the drive belt, insert the cables, push the Bowden tube into the fitting and then the filament holder, easy to assemble in five minutes.
Best
XT-S1 3D Foldable Printer, 3.5 '' Touch Screen and UL Certified Power Support PVA TPU ABS PLA, FDM DIY Direct Feed Printer 15.7 '' x 15 '' x 18 ''（XT-S1）
- 【HIGH PRECISION】Can perfectly print out the model you want. 3D printer has a compact appearance and a basic open frame design, compact enough to fit any desk. The printing size is 235 * 235 * 25mm, printing capacity is greater.
- 【STABLE USE】The 3D printer can work stably, can work continuously for about 100 hours.The aluminum base plate and glass panel makes the printed product uniform and flat and easy to take out.
- 【TOUCH COLOR SCREEN 】XT-S2 Touch Screen is easy to operate with its brand new friendly UI. Preview the model and printing process on screen, allowing offline printing. Say goodbye to the traditional manual knob screen.
- 【EASY TO ASSEMBLE】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
- 【WARRANTY AND SERVICE】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
Best
Comgrow Creality Ender 3 Pro 3D Printer with Glass Plate, Upgrade Cmagnet Build Surface Plate and UL Certified Meanwell Power Supply Build Volume 220x220x250mm
- Upgraded Version: It is an upgraded version of Ender 3, comes with extra glass plate, Cmagnet build surface, and also MeanWell power supply. The Ender 3 Pro boasts the same outstanding performance as the Ender 3, upgraded components make this 3D printer more stable, durable and easier to operate.
- MeanWell Power Supply: Equipped with UL certified MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing.
- Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
- Resume Printing Function: Shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
- What You Get: Ceality Ender 3 Pro 3D pinrter, Glass plate, lifetime technical assistance and 24 hours professional customer service.
Best
Comgrow Creality 3D Ender 3 Pro 3D Printer with Cmagnet Build Plateform Surface 220x220x250mm Print Size
- Upgrade Version: This is the upgrade version of Creality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size.
- Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
- Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
- Improved Mechanical Properties:The Ender 3 Pro has been redesigned with a more sturdy, 40×40 aluminum extrusion for the Y-axis base. This should improve the overall stability of the printing surface.
Semi-assembled Kit: several assembled parts This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics. - WHAT CAN WE DO: As an authorised reseller of Creality 3D, we can offer 100% original products for you. And also can offer you professional customer service.
Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.
We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).
We have categorized the products in order to show the most popular and best sellers.
S2 3d printer
Here is the ranking of the best S2 3d printer, click to see reviews, details and active promotions:
Visit our section devoted to providing consumer opinions on S2 3d printer and read the reviews left by real customers, see the S2 3d printer ranking and find the store where to buy at the lowest price.
Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.
S2 3d printer New
Z&S ZSHENG 1/4'' 6.35mm Screwdriver Magnetic Ring S2 Alloy Steel Removable Magnet Driver Hex Electric Screwdriver Bit Magnetizer (Color : Lake blue)
- -100% brand new, high quality
- -Made of high-quality materials, corrosion-resistant
- -Easy to install and uninstall
- -Small size, easy to carry.
- -It is very useful and easy to install, it is a lot of things that can be used.
S2 3d printer New
Z&S ZSHENG 6pcs/lots Rotary Tool Mini Drill Bit Set Cutting Tools For Woodworking Knife Wood Carving Tools Kit Wood Tools Accessories
- -100% brand new, high quality
- -Made of high-quality materials, corrosion-resistant
- -Easy to install and uninstall
- -Small size, easy to carry.
- -It is very useful and easy to install, it is a lot of things that can be used.
S2 3d printer New
Eono by Amazon 3D Printer PLA Filament, Tangle-Free with 0.03 mm Dimensional Accuracy, 1.75 mm, 1 kg Spool, Grey
- Neat Spooling and Tangle-Free: Premium 1.75 mm 3D filament uses layer-by-layer technology to ensure perfect spooling and neat winding; this reduces the chance of failed prints so you can tackle longer prints with ease.
- Non-Toxic and Environmentally Friendly: Made from natural, renewable materials; non-toxic, environmentally friendly and 100% biodegradable; harm-free for the environment and the user; recommended extrusion temperature at nozzle: 190-230 °C; recommended build platform temperature: 20-70 °C.
- High-Performance for Quality Prints: This tangle-free filament has consistent diameter and shape for less stringing and warping, minimal shrinkage, and strong layer adhesion; fewer jams and failures for smooth, continuous printing and a smoother finish.
- Wide Compatibility with FDM 3D Printers and 3D Pens: Use with a wide variety of FDM 3D printers and 3D pens that use 1.75 mm filament including ANYCUBIC, AirWolf, Aleph Objects, BCN3D, Beeverycreative, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, etc.
- Premium Packaging and After-Sale Service: Delivered vacuum-sealed with desiccant to ensure optimal condition on arrival, free from dust and dirt; we provide 24-hour customer service to ensure your satisfaction.
S2 3d printer New
WY-YAN 433M Switch Module Board 5V 4 Ways with RF 30m 4 Buttons Remote Control
- Module type: learning wireless access module
- Receiver size: 65*56*22mm (with housing, housing with 3mm screw hole)
- Static operating current: 8mA or so (relay release state)
- Operating current: about 220mA (relay pull state)
- Operating voltage: 4.5-5.5V (input) VCC: Connect the power supply positive GND: Connect the power supply negative
S2 3d printer New
HUANRUOBAIHUO High Precision 24 In 1 Screwdriver Kit Repair Disassemble Tool Set DIY Magnetic Bits Screw Driver 3D Printer Parts Aluminum Quadcopters accessories
- Item Type: Mechanical Kit/Hardware Parts
- Model Number: 24 In 1
- Product Name: 24 In 1 Screwdriver Kit
S2 3d printer New
SHIZHI 2 In 1 Out Hotend Kit Fit For Geeetech A10M And A20M 3D Printer With 0.4mm Nozzle 1.75mm Filament Hot 3d Printer Parts
- This 2 in 1 out hotend kit is designed for Geeetech A10M and A20M 3D printer.
- It can greatly reduce the risk of clogging or jamming so as to save filament for you.
- With its good craftsmanship, two pieces of different color filament could uniformly mixed together to create amazing prints.
- Besides, its standard 0.4mm nozzle delivers satisfactorily smooth surface finish.
- Mix-color printing enriches your daily life~
S2 3d printer New
XT-S1 3D Foldable Printer, 3.5 '' Touch Screen and UL Certified Power Support PVA TPU ABS PLA, FDM DIY Direct Feed Printer 15.7 '' x 15 '' x 18 ''（XT-S1）
- 【HIGH PRECISION】Can perfectly print out the model you want. 3D printer has a compact appearance and a basic open frame design, compact enough to fit any desk. The printing size is 235 * 235 * 25mm, printing capacity is greater.
- 【STABLE USE】The 3D printer can work stably, can work continuously for about 100 hours.The aluminum base plate and glass panel makes the printed product uniform and flat and easy to take out.
- 【TOUCH COLOR SCREEN 】XT-S2 Touch Screen is easy to operate with its brand new friendly UI. Preview the model and printing process on screen, allowing offline printing. Say goodbye to the traditional manual knob screen.
- 【EASY TO ASSEMBLE】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
- 【WARRANTY AND SERVICE】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
S2 3d printer New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
- 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
- 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
- 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
- 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
- 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
DISCOUNTS2 3d printer New
TENLOG Hands 2 Independent Dual Extruder 3D Printer,300 Degree High Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS,220x220x250mm
- 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
- 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
- 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
- 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
- 【Warranty and Assemble】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
Reviews
On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased S2 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on S2 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.
XT-S1 3D Foldable Printer, 3.5 '' Touch Screen and UL Certified Power Support PVA TPU ABS PLA, FDM DIY Direct Feed Printer 15.7 '' x 15 '' x 18 ''（XT-S1）
- 【HIGH PRECISION】Can perfectly print out the model you want. 3D printer has a compact appearance and a basic open frame design, compact enough to fit any desk. The printing size is 235 * 235 * 25mm, printing capacity is greater.
- 【STABLE USE】The 3D printer can work stably, can work continuously for about 100 hours.The aluminum base plate and glass panel makes the printed product uniform and flat and easy to take out.
- 【TOUCH COLOR SCREEN 】XT-S2 Touch Screen is easy to operate with its brand new friendly UI. Preview the model and printing process on screen, allowing offline printing. Say goodbye to the traditional manual knob screen.
- 【EASY TO ASSEMBLE】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
- 【WARRANTY AND SERVICE】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
- 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
- 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
- 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
- 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
- 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
WY-YAN 433M Switch Module Board 5V 4 Ways with RF 30m 4 Buttons Remote Control
- Module type: learning wireless access module
- Receiver size: 65*56*22mm (with housing, housing with 3mm screw hole)
- Static operating current: 8mA or so (relay release state)
- Operating current: about 220mA (relay pull state)
- Operating voltage: 4.5-5.5V (input) VCC: Connect the power supply positive GND: Connect the power supply negative
DISCOUNT
TENLOG Hands 2 Independent Dual Extruder 3D Printer,300 Degree High Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS,220x220x250mm
- 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
- 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
- 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
- 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
- 【Warranty and Assemble】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
Z&S ZSHENG 1/4'' 6.35mm Screwdriver Magnetic Ring S2 Alloy Steel Removable Magnet Driver Hex Electric Screwdriver Bit Magnetizer (Color : Lake blue)
- -100% brand new, high quality
- -Made of high-quality materials, corrosion-resistant
- -Easy to install and uninstall
- -Small size, easy to carry.
- -It is very useful and easy to install, it is a lot of things that can be used.
Pricing
The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.
How can you get the best deal? Read and learn in order to select the most convenient offer.
The price is updated every day so you always know how much S2 3d printer actually costs.
Latest S2 3d printer
Comgrow Creality Ender 3 Pro 3D Printer with Glass Plate, Upgrade Cmagnet Build Surface Plate and UL Certified Meanwell Power Supply Build Volume 220x220x250mm
- Upgraded Version: It is an upgraded version of Ender 3, comes with extra glass plate, Cmagnet build surface, and also MeanWell power supply. The Ender 3 Pro boasts the same outstanding performance as the Ender 3, upgraded components make this 3D printer more stable, durable and easier to operate.
- MeanWell Power Supply: Equipped with UL certified MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing.
- Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
- Resume Printing Function: Shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
- What You Get: Ceality Ender 3 Pro 3D pinrter, Glass plate, lifetime technical assistance and 24 hours professional customer service.
Latest S2 3d printer
XT-S1 3D Foldable Printer, 3.5 '' Touch Screen and UL Certified Power Support PVA TPU ABS PLA, FDM DIY Direct Feed Printer 15.7 '' x 15 '' x 18 ''（XT-S1）
- 【HIGH PRECISION】Can perfectly print out the model you want. 3D printer has a compact appearance and a basic open frame design, compact enough to fit any desk. The printing size is 235 * 235 * 25mm, printing capacity is greater.
- 【STABLE USE】The 3D printer can work stably, can work continuously for about 100 hours.The aluminum base plate and glass panel makes the printed product uniform and flat and easy to take out.
- 【TOUCH COLOR SCREEN 】XT-S2 Touch Screen is easy to operate with its brand new friendly UI. Preview the model and printing process on screen, allowing offline printing. Say goodbye to the traditional manual knob screen.
- 【EASY TO ASSEMBLE】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
- 【WARRANTY AND SERVICE】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
Latest S2 3d printer
Comgrow Creality 3D Ender 3 Pro 3D Printer with Cmagnet Build Plateform Surface 220x220x250mm Print Size
- Upgrade Version: This is the upgrade version of Creality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size.
- Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
- Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
- Improved Mechanical Properties:The Ender 3 Pro has been redesigned with a more sturdy, 40×40 aluminum extrusion for the Y-axis base. This should improve the overall stability of the printing surface.
Semi-assembled Kit: several assembled parts This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics. - WHAT CAN WE DO: As an authorised reseller of Creality 3D, we can offer 100% original products for you. And also can offer you professional customer service.
Latest S2 3d printer
Screen replacement kit 5.5 Inch 2560 * 1440 2K LCD Screen LS055R1SX04+ HDMI To MIPI Driver Controller S2.2 Fit For 3d SLA Printer NanoDLP Thingiverse TOS Repair kit replacement screen
- Product Type: Tablet LCD
- Display Size: <7 Inch
- Brand Name:fit for ue月郎
- Hello, dear customer: We will prepare and ship the goods for you immediately after you place the order, and we will send you the best quality products.
Latest S2 3d printer
Screen replacement kit 5.5 Inch 2560 * 1440 2K LCD Screen LS055R1SX04+ HDMI To MIPI Driver Controller S2.2 Fit For 3d SLA Printer NanoDLP Thingiverse TOS Repair kit replacement screen
- Product Type: Tablet LCD
- Display Size: <7 Inch
- Brand Name:fit for ue月郎
- Hello, dear customer: We will prepare and ship the goods for you immediately after you place the order, and we will send you the best quality products.
DISCOUNTLatest S2 3d printer
3D Printing Pen, TECBOSS Intelligent 3D Pen with 2 Pack PLA Filaments, Compatible with PLA & ABS, LCD Display Great Arts Crafts Gift for Kids & Adults
- A Creative Automatic 3D Printing Pen - Helps children to improve spatial thinking, creativity and artistic skills. Designed for creative flat and 3d models, wonderful stress relief and an alternative to mindfulness colouring books. The only limit is your imagination. It is a good partner for you and your children to make art creation.
- Environmentally Friendly Materials - Two modes compatible with 1.75mm PLA and ABS filament. Intelligent 3D Drawing Pen is made from skin-friendly materials, the refills and 3d pen has no strange smells. A green and comfortable way of art life. It is good for the health of your children.
- Speed and Temperature Control - A LCD display with buttons for loading / unloading and adjusting the temperature and speed. 8 different speed options meet all of your needs. You can choose the mode according to your 3d pen refills. The tip of the 3d printer pen would not be clogged when you finished the masterwork.
- LCD DISPLAY - The LCD display will not only show the types of material you’re using (ABS or PLA), but also display the temperature. So it becomes easy and convenient for you to get control of this 3D pen. To avoid blocking, residues are automatically excluded.
- MUCH SAFER - It comes with 2 finger protectors to cover your thumb and index finger to avoid hurting during use. Since the tip of the pen will become hot while the pen’s working, it’s required children should use this pen under adults supervision.
Latest S2 3d printer
Screen replacement kit 5.5 Inch 2560 * 1440 2K LCD Screen LS055R1SX04+ HDMI To MIPI Driver Controller S2.2 Fit For 3d SLA Printer NanoDLP Thingiverse TOS Repair kit replacement screen
- Product Type: Tablet LCD
- Display Size: <7 Inch
- Brand Name:fit for ue月郎
- Hello, dear customer: We will prepare and ship the goods for you immediately after you place the order, and we will send you the best quality products.
Latest S2 3d printer
OLRIKE 45 in 1 Precision Magnetic Screwdrivers Set,S2 Alloy Steels Professional Screwdrivers Bit Set Repair for PC, Laptop, Mobile Phone, Xbox
- 【58 in 1 Precison Screwdriver Sets 】The Precision Screwdriver Bit sets Include Nut Driver/ Hex/ Torx/ Flathead/ Phillips/ Pentalobe/ Tri-Point/ Triangle/ Spanner/ SIM Eject Bit, It is a Multi-Function Tool, 42 Bit Can Easily be Replaced, Suitable for Home Maintenance of Small Products
- 【High Hardness S2 Material】 Screwdriver Set Made of S2 Alloy Steels Carefully Selected, It Average Carbon Content of 0.2% Carbon Structural Steel, Hardness of HRC58-62 , Excellent Strength and Toughness, Effectively Prevent Bit Slipping, Allowing Your Repairs to be Completed Successfully
- 【Strength Magnetic】 Magnetic Screwdriver Set in Well Organised Case, The Strong Magnetic is Better Adsorption of Small Screws, Also Equipped with Activities Rotating Cap, Perfect for Your Maintenance Work
- 【 With Extension Rod and Flexible Hose 】Professional Screwdriver Kit Come with an Extension Rod. A Flexible Shaft is Perfect for Where the Handle is Hard to Reach, Bending of the Hose Can be Used in a Small Space, Helpful to Solve Puzzle About Some Blind Angle Screws.
- 【Wide Range of Applications】Widely Applicable to a Variety of Modern Mobile Phone, TV, Phone, Glasses, CD, VCD, DVD Machines, Communication Equipment
Latest S2 3d printer
Screen replacement kit 5.5 Inch 2560 * 1440 2K LCD Screen LS055R1SX04+ HDMI To MIPI Driver Controller S2.2 Fit For 3d SLA Printer NanoDLP Thingiverse TOS Repair kit replacement screen
- Product Type: Tablet LCD
- Display Size: <7 Inch
- Brand Name:fit for ue月郎
- Hello, dear customer: We will prepare and ship the goods for you immediately after you place the order, and we will send you the best quality products.
Promotions and Deals (UK)
During the year there are many promotions on products for sale online and S2 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".
We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).
Cost
Below we have selected a list of S2 3d printer which are among the cheapest on the market. Just scroll through the list to find S2 3d printer the cheapest products.
Catalog
The product S2 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.
S2 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.
The online catalog is updated frequently in order to provide the latest details, product inforomation and price.
S2 3d printer New
Z&S ZSHENG 1/4'' 6.35mm Screwdriver Magnetic Ring S2 Alloy Steel Removable Magnet Driver Hex Electric Screwdriver Bit Magnetizer (Color : Lake blue)
- -100% brand new, high quality
- -Made of high-quality materials, corrosion-resistant
- -Easy to install and uninstall
- -Small size, easy to carry.
- -It is very useful and easy to install, it is a lot of things that can be used.
S2 3d printer New
Z&S ZSHENG 6pcs/lots Rotary Tool Mini Drill Bit Set Cutting Tools For Woodworking Knife Wood Carving Tools Kit Wood Tools Accessories
- -100% brand new, high quality
- -Made of high-quality materials, corrosion-resistant
- -Easy to install and uninstall
- -Small size, easy to carry.
- -It is very useful and easy to install, it is a lot of things that can be used.
S2 3d printer New
Eono by Amazon 3D Printer PLA Filament, Tangle-Free with 0.03 mm Dimensional Accuracy, 1.75 mm, 1 kg Spool, Grey
- Neat Spooling and Tangle-Free: Premium 1.75 mm 3D filament uses layer-by-layer technology to ensure perfect spooling and neat winding; this reduces the chance of failed prints so you can tackle longer prints with ease.
- Non-Toxic and Environmentally Friendly: Made from natural, renewable materials; non-toxic, environmentally friendly and 100% biodegradable; harm-free for the environment and the user; recommended extrusion temperature at nozzle: 190-230 °C; recommended build platform temperature: 20-70 °C.
- High-Performance for Quality Prints: This tangle-free filament has consistent diameter and shape for less stringing and warping, minimal shrinkage, and strong layer adhesion; fewer jams and failures for smooth, continuous printing and a smoother finish.
- Wide Compatibility with FDM 3D Printers and 3D Pens: Use with a wide variety of FDM 3D printers and 3D pens that use 1.75 mm filament including ANYCUBIC, AirWolf, Aleph Objects, BCN3D, Beeverycreative, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, etc.
- Premium Packaging and After-Sale Service: Delivered vacuum-sealed with desiccant to ensure optimal condition on arrival, free from dust and dirt; we provide 24-hour customer service to ensure your satisfaction.
S2 3d printer New
WY-YAN 433M Switch Module Board 5V 4 Ways with RF 30m 4 Buttons Remote Control
- Module type: learning wireless access module
- Receiver size: 65*56*22mm (with housing, housing with 3mm screw hole)
- Static operating current: 8mA or so (relay release state)
- Operating current: about 220mA (relay pull state)
- Operating voltage: 4.5-5.5V (input) VCC: Connect the power supply positive GND: Connect the power supply negative
S2 3d printer New
HUANRUOBAIHUO High Precision 24 In 1 Screwdriver Kit Repair Disassemble Tool Set DIY Magnetic Bits Screw Driver 3D Printer Parts Aluminum Quadcopters accessories
- Item Type: Mechanical Kit/Hardware Parts
- Model Number: 24 In 1
- Product Name: 24 In 1 Screwdriver Kit
S2 3d printer New
SHIZHI 2 In 1 Out Hotend Kit Fit For Geeetech A10M And A20M 3D Printer With 0.4mm Nozzle 1.75mm Filament Hot 3d Printer Parts
- This 2 in 1 out hotend kit is designed for Geeetech A10M and A20M 3D printer.
- It can greatly reduce the risk of clogging or jamming so as to save filament for you.
- With its good craftsmanship, two pieces of different color filament could uniformly mixed together to create amazing prints.
- Besides, its standard 0.4mm nozzle delivers satisfactorily smooth surface finish.
- Mix-color printing enriches your daily life~
S2 3d printer New
XT-S1 3D Foldable Printer, 3.5 '' Touch Screen and UL Certified Power Support PVA TPU ABS PLA, FDM DIY Direct Feed Printer 15.7 '' x 15 '' x 18 ''（XT-S1）
- 【HIGH PRECISION】Can perfectly print out the model you want. 3D printer has a compact appearance and a basic open frame design, compact enough to fit any desk. The printing size is 235 * 235 * 25mm, printing capacity is greater.
- 【STABLE USE】The 3D printer can work stably, can work continuously for about 100 hours.The aluminum base plate and glass panel makes the printed product uniform and flat and easy to take out.
- 【TOUCH COLOR SCREEN 】XT-S2 Touch Screen is easy to operate with its brand new friendly UI. Preview the model and printing process on screen, allowing offline printing. Say goodbye to the traditional manual knob screen.
- 【EASY TO ASSEMBLE】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
- 【WARRANTY AND SERVICE】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
S2 3d printer New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
- 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
- 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
- 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
- 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
- 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
DISCOUNTS2 3d printer New
TENLOG Hands 2 Independent Dual Extruder 3D Printer,300 Degree High Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS,220x220x250mm
- 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
- 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
- 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
- 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
- 【Warranty and Assemble】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
Where to buy?
If you are asking yourself where to buy S2 3d printer? Buy online or directly in a shop?
- Online The advantages of online stores are the immediate availability of S2 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
- Physical Store In a physical store instead you can try the product with your own hands, you can directly see S2 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.
S2 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from S2 3d printer used.
Discounts and Coupons in the United Kingdom (UK)
If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get S2 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.
XT-S1 3D Foldable Printer, 3.5 '' Touch Screen and UL Certified Power Support PVA TPU ABS PLA, FDM DIY Direct Feed Printer 15.7 '' x 15 '' x 18 ''（XT-S1）
- 【HIGH PRECISION】Can perfectly print out the model you want. 3D printer has a compact appearance and a basic open frame design, compact enough to fit any desk. The printing size is 235 * 235 * 25mm, printing capacity is greater.
- 【STABLE USE】The 3D printer can work stably, can work continuously for about 100 hours.The aluminum base plate and glass panel makes the printed product uniform and flat and easy to take out.
- 【TOUCH COLOR SCREEN 】XT-S2 Touch Screen is easy to operate with its brand new friendly UI. Preview the model and printing process on screen, allowing offline printing. Say goodbye to the traditional manual knob screen.
- 【EASY TO ASSEMBLE】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
- 【WARRANTY AND SERVICE】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
- 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
- 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
- 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
- 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
- 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
WY-YAN 433M Switch Module Board 5V 4 Ways with RF 30m 4 Buttons Remote Control
- Module type: learning wireless access module
- Receiver size: 65*56*22mm (with housing, housing with 3mm screw hole)
- Static operating current: 8mA or so (relay release state)
- Operating current: about 220mA (relay pull state)
- Operating voltage: 4.5-5.5V (input) VCC: Connect the power supply positive GND: Connect the power supply negative
DISCOUNT
TENLOG Hands 2 Independent Dual Extruder 3D Printer,300 Degree High Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS,220x220x250mm
- 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
- 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
- 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
- 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
- 【Warranty and Assemble】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
Z&S ZSHENG 1/4'' 6.35mm Screwdriver Magnetic Ring S2 Alloy Steel Removable Magnet Driver Hex Electric Screwdriver Bit Magnetizer (Color : Lake blue)
- -100% brand new, high quality
- -Made of high-quality materials, corrosion-resistant
- -Easy to install and uninstall
- -Small size, easy to carry.
- -It is very useful and easy to install, it is a lot of things that can be used.
Similar Products
Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to S2 3d printer.
(19 votes, average: 3.42 out of 5)
Loading...