Rumba 3d printer controller Reviews and Best Deals

Online product reviews and comparisons for Rumba 3d printer controller.

Latest Rumba 3d printer controller
3D Printer Controller Tango V1.0 3d control board upgraded of Rumba controller for 3D Printer
  • Easy to Install: Compared with other 3D printer control board(such as RAMPS, etc.), the Tango V1.0 support more motor drivers, Reduce some straight plug-in part, which improve the connectivity and stability
  • LCD expansion interface,support LCD screen and SD expansion interface, it can achieve offline printing
  • Using ATMEGA2560 as the main control chip, with high-performance USB to UART chip CP2102,it is compatible to all related RAMPS firmware
  • Five ADC interfaces for temperature measurement, three nozzle temperature measurement, one hot bed temperature measurement, and one ambient temperature measurement
  • Six-way PWM: Three control nozzle heating, one control the heating of the hot bed, two control fan rotation; Six-way limit
Latest Rumba 3d printer controller
Latest Rumba 3d printer controller
JIAHONG Accessories 3D Printer Part Tango V1.0 Control Board Upgraded Rumba Controller Board Support Multi-Color Printing for 3D Printer 3D Printer
  • Five ADC interfaces for temperature measurement, three nozzle temperature measurement, one hot bed temperature measurement, and one ambient temperature measurement
  • Using ATMEGA2560 as the main control chip, with high- USB to UART chip CP2102,it is compatible to all related RAMPS firmware
  • LCD expansion interface,support LCD screen and expansion interface, it can achieve offline printing
  • Integrated design, installed easily. Compared with other 3D printer control board(such as RAMPS, etc.), the Tango V1.0 support more motor drivers, Reduce some straight plug-in part, which improve the connectivity and stability
  • We strive to answer all questions and resolve any problems as quickly as possible. Your satisfication is Our Goal! Thank you!
Latest Rumba 3d printer controller
Easy to Repair for Tango Mainboard Integrated Motherboard for Tango V1.0 Base On for Rumba Smsrt Controller for MEGA2560 Processor for 3D Printer Printer Parts
  • Dimension:150mm*75mm
  • Power output: 12-24V
  • Support motor Number: six
  • Support motor driver: A4988、DRV8825、TMC2100
  • Controller screen: LCD2004、LCD12864 ,
Latest Rumba 3d printer controller
DTOYZ Integrated Motherboard TANGO V1.0 Base On Rumba Smsrt Controller MEGA2560 Processor For 3D Printer
  • Power output: 12-24V
  • Support motor Number: six
  • Support motor driver: A4988、DRV8825、TMC2100
  • Controller screen: LCD2004、LCD12864 ,
  • For more detailed information, please browse the product description, please confirm whether the product is what you need before placing an order.
Latest Rumba 3d printer controller
Apricot blossom 3D Printer Part Tango V1.0 Control Board Upgraded Rumba Controller Board Support Multi-Color Printing Fit For 3D Printer (Color : Black)
  • Installation is simple and easy to use.
  • Integrated design, installed easily. Compared with other 3D printer control board(such as RAMPS, etc.), the Tango V1.0 support more motor drivers, Reduce some straight plug-in part, which improve the connectivity and stability LCD expansion interface,support LCD sn and SD expansion interface,
  • it can achieve offline printing Using ATMEGA2560 as the main control chip, with high-performance USB to UART chip CP2102,it is compatible to all related RAMPS firmware.
  • Five ADC interfaces for temperature measurement, three nozzle temperature measurement, one hot bed temperature measurement, and one ambient temperature measurement.
  • Six-way PWM: Three control nozzle heating, one control the heating of the hot bed, two control fan rotation; Six-way limit switch; Xmin/Xmax, Ymin/Ymax, Zmin/Zmax can be connected to sensors such as mechanical switches, optical switches, and proximity switches.
Latest Rumba 3d printer controller
Allamp 3D Printer Part Tango V1.0 Control Board Upgraded Rumba Controller Board Support Multi-Color Printing for 3D Printer
  • Five ADC interfaces for temperature measurement, three nozzle temperature measurement, one hot bed temperature measurement, and one ambient temperature measurement
  • Using ATMEGA2560 as the main control chip, with high- USB to UART chip CP2102,it is compatible to all related RAMPS firmware
  • Integrated design, installed easily. Compared with other 3D printer control board(such as RAMPS, etc.), the Tango V1.0 support more motor drivers, Reduce some straight plug-in part, which improve the connectivity and stability
  • LCD expansion interface,support LCD screen and expansion interface, it can achieve offline printing
  • Six-way PWM: Three control nozzle heating, one control the heating of the hot bed, two control fan rotation; Six-way limit switch; Xmin/Xmax, Ymin/Ymax, Zmin/Zmax can be connected to sensors such as mechanical switches, optical switches, and proximity switches
Latest Rumba 3d printer controller
3D Printer Controllers 3D Printer Upgraded 12V Rumba Plus Integrated Mainboard Control Board with 6xA4988 Stepper Driver (Color : Black, Size : One size)
  • Offers a variety comprehensive learning kits and tutorials to help the hobbyists from entry to the proficient. In this open-source world, we would like to provide you with various interesting products.
  • 1. Rumba uses an integrated 3D printer control board based on the ATmega2560 AVR processor, which is designed for CNC machinings such as 3D printers, engraving machines, cutting machines.
  • 2. You can use a personal computer to control the 3D printer via a USB cable connection or print directly from the SD card.
  • 3. Thanks to the integrated design, easy installation and commissioning, and the use of the common IDE as development software, firmware upgrades, the 4. Compared with the common 3D printing control board (such as RAMPS) in the market, there is one more motor drive, which reduces the part of the straight plug part, which improves the connectivity and stability.
  • 5. Size: 135mm*175mm.
Latest Rumba 3d printer controller
for Tango Mainboard Integrated Motherboard for Tango V1.0 Base On for Rumba Smsrt Controller for MEGA2560 Processor for 3D Printer
  • Dimension:150mm*75mm
  • Power output: 12-24V
  • Support motor Number: six
  • Support motor driver: A4988、DRV8825、TMC2100
  • Controller screen: LCD2004、LCD12864 ,

Buy Rumba 3d printer controller from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Rumba 3d printer controller, buy Rumba 3d printer controller directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Rumba 3d printer controller including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


Best
Xbox Wireless Controller – Robot White
  • Experience the modernized design of the Xbox Wireless Controller in Robot White, featuring sculpted surfaces and refined geometry for enhanced comfort and effortless control during gameplay
  • Stay on target with textured grip on the triggers, bumpers, and back case and with a new hybrid D-pad for accurate, yet familiar input
  • Make the controller your own by customizing button mapping with the Xbox Accessories app
  • Plug in any compatible headset with the 3.5mm audio headset jack
  • Includes Xbox Wireless and Bluetooth technology for wireless gaming on supported consoles, Windows 10 PCs, Android and tablets
Best
3D Printer MKS Gen-L V1.0 Controller Board, MKS Integrated Mainboard Motherboard Compatible with Ramps1.4, Supports TMC2100 A4988 8825 Driver, LCD2004 LCD12864 TFT28 TFT32
  • 【Advantage-1】Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage. Use high-quality MOSFET, better cooling effect and more stable.
  • 【Advantage-2】Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to directly replace the Ramps 1.4. Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32.
  • 【Advantage-3】Plug the stepper drivers according to the different color terminals which decreases the probability of reverse and prevents the controller board damage.
  • 【Advantage-4】2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like.
  • 【Advantage-5】Use CH340 serial port chip, more easily install the drive than 16U2. Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats.
Best
Yongenee MKS RUMBA Motherboard + 6x TMC2208 Driver Kit Driver Modules
  • Using the same CPU as Mega, Atmega2560 as the main control chip, together with high- USB chip Atmega16U2, to achieve compatibility with all Ramps-related firmware.
  • 5 temperature sensor interface input.
  • All pins are drawn out to facilitate more functional expansion.
  • With LCD extension interface, it can connect SD extension version of Chinese LCD screen to realize offline printing (support 2004 and 12864).
  • Welcome to our shop, please rest assured to buy products, we are a professional Amazon shop, please feel free to contact us if you have any questions.
Best
BIQU SKR Mini E3 V2.0 32-bit control board with TFT35 E3 V3.0 touchscreen display RepRap Smart Controller Panel replacement Original touchscreen for Ender 3 / Ender 3 Pro CR-10 3D printer
  • 【32 Bit High Performance Microprocessor】SKR MIN E3 V2.0 is a silent control board adopts 32 bit ARM level Cortex-M3 series STM32F103RCT6,72MHz frequency Microprocessor, which is designed for ENDER 3 3D printer particularly,a perfect replacement motherboard of the Ender3 printer.
  • 【Support a variety of Functions】SKR MINI E3 board supports BLTouch, RGB lights, blocking detection, shutdown function.What ’s more,it also supports TFT35 E3 V3.0,TFT35 V3.0,TFT28 V3.0 touch screen,original 12864LCD of Ender 3 printer.
  • 【Firmware Update】Firstly download firmware of SKR MINI E3 V2.0 motherboard,copy and save it to SD card.firmware must bed reserved ,then re-plug the SD card and wait to 10s.The firmware has been successfully updated.
  • 【Two Working Modes】TFT35 E3 V3.0 Touch screen support UART serial port screen mode(touch screen mode) and 12864 screen mode, it can replace original display of Ender 3 3D printer.
  • 【More Extension Ports is Reserved 】TFT35 E3 V3.0 display reserve the extension port of filament breaking detection,automatic shutdown after printing,also WIFI function can be realized by external WIFI module through WIFI port.
Best
CLJ-LJ 3D Printer Part Tango V1.0 Control Board Upgraded Rumba Controller Board Support Multi-Color Printing for 3D Printer
  • Five ADC interfaces for temperature measurement, three nozzle temperature measurement, one bed temperature measurement, and one ambient temperature measurement
  • Using ATMEGA2560 as the main control chip, with high- USB to UART chip CP2102,it is compatible to all related RAMPS firmware
  • Integrated design, installed easily. Compared with other 3D printer control board(such as RAMPS, etc.), the Tango V1.0 support more motor drivers, Reduce some straight plug-in part, which improve the connectivity and stability
  • LCD expansion interface,support LCD screen and expansion interface, it can achieve offline printing
  • Six-way PWM: Three control nozzle heating, one control the heating of the bed, two control fan rotation; Six-way limit switch; Xmin/Xmax, Ymin/Ymax, Zmin/Zmax can be connected to sensors such as mechanical switches, optical switches, and proximity switches

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Rumba 3d printer controller

Here is the ranking of the best Rumba 3d printer controller, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Rumba 3d printer controller and read the reviews left by real customers, see the Rumba 3d printer controller ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Rumba 3d printer controller New
HYY-YY Wireless Wireless Receiver Module For Doorbell, Size - 3 X 1.3cm
  • Application: Car remote control door switch (RKE), door opener remote control, wireless alarm, wireless door bell, wireless controller, wireless data transmission
  • Good local oscillator radiation suppression ability, multiple receiver modules can work together (transmit individually and multiple-receiving) and do not interfere with each other, not affect the receiving distance
  • Supply Voltage: 3.3V-5.5V; Working Temperature: -30℃ to 85℃
  • Receive Sensitivity: -107dBm; Working Frequency:
  • The products in our shop have many characteristics. Welcome to our shop to visit other styles of products. If you have any questions, please feel free to ask questions. We will reply your questions within 24 hours. Your satisfaction is our biggest goal
Rumba 3d printer controller New
HYY-YY 10V-55V DC PWM Controller with Reversing Direction Switch Digital Display Motor Speed Controller Regulator Module
  • WITH DIGITAL DISPLAY-- Motor Speed Controller is designed with a digital display that shows the rate in percent of actual speed to maximum speed.
  • ADOPT HIGH QUALITY CIRCUIT BOARD-- Voltage Regulator is made with high quality circuit board which ensures a longer service life, high stability and reliability
  • WITH MATEL CASE-- This simple and easy-to-use DC motor speed controller comes with a matel case which can protect the circuit board
  • EASY OPERATION-- This motor speed controller would allow setting direction of rotation that accomplishes reversing the motor's direction.
  • QUICK HEAT DISSIPATION-- Well design case can protect the controller board from damage as well as dissipate heat.
Rumba 3d printer controller New
HYY-YY With Optocoupler Protection DC5V 2 Wa 2CH Channel Rela Module Woodworking Tools
  • Eas to use, just learn the code of the remote control and the receiver controller.
  • The module uses genuine qualit rela, normall open interfaces
  • The interface design of human nature, all interfaces are available through a direct connection terminal leads, ver convenient
  • High stabilit and low power consumption.
  • The products in our shop have many characteristics. Welcome to our shop to visit other styles of products. If you have any questions, please feel free to ask questions. We will reply your questions within 24 hours. Your satisfaction is our biggest goal
Rumba 3d printer controller New
HYY-YY 10-60V 35A DC Motor Controller PWM Stepless Switch PCBA Module
  • Terminal : Barrier Terminal Block
  • Speed Regulation:PWM Stepless regulation
  • Maximum Output Wattage:2000W
  • Maximum Output Current:35A
  • Working Voltage:10-60VDC
Rumba 3d printer controller New
HYY-YY 3D Printer RAMPS 1.4 Controller + MEGA2560 R3 + A4988 With Heat Sink USB Calbe Jumper Kit
  • The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package for low cost
  • RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion
  • Additionally, a number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack
  • With the boot-loader, download the program directly via USB without having to go through other external writer
Rumba 3d printer controller New
HYY-YY CCMmini Mini Motor Controller PWM DC Motor Governor Board Speed Control Module 3A 6V/12V/24V Universal Spot Steuermodul
  • 2. Then the motor can be positive and negative, when the direction of operation and expectations do not match, you can adjust the line order to change the direction.
  • 4.Not suitable for brushless DC motor speed; also can not be used as a voltage regulator !
  • 1. This is not a power module, must be connected to the motor to speed, do not take the motor multimeter output does not change.
  • 3. This governor is used for DC brush motor.
  • The products in our shop have many characteristics. Welcome to our shop to visit other styles of products. If you have any questions, please feel free to ask questions. We will reply your questions within 24 hours. Your satisfaction is our biggest goal
Rumba 3d printer controller New
HYY-YY XY-T01 Digital Thermostat Heating Refrigeration Temperature Control Switch Temperature Controller Module
  • The products in our shop have many characteristics. Welcome to our shop to visit other styles of products. If you have any questions, please feel free to ask questions. We will reply your questions within 24 hours. Your satisfaction is our biggest goal
Rumba 3d printer controller New
HYY-YY LCD Digital Display Buck-Boost Adjustable Power Supply High Efficiency Module Board Constant Voltage Constant Current Crystal Voltmeter Ammeter Spot Steuermodul
  • -Can be boosted, can be stepped down, output voltage 0.5-30V arbitrary regulation, limit current 0-4A arbitrary regulation;Anti-backflow at the output end, no additional anti-backup diode is required to charge the battery.
  • -The button controls the ON/OFF status of the output, and can be set to default to ON or OFF.
  • -Output ripple is small, with LC filter;Contain heat sink, send module support isolation column.
  • -LCD can display input and output voltage, output current output power;Anti-reverse protection at the input end, reverse connection will not burn.
  • -Using buck-boost chip as the main controller, external 60V 75A MOS tube as switch, dual 60V 5A SS56 Schottky rectifier, 60V voltage value, better than the market XL6009/LM2577 immature program (many devices resistance Insufficient voltage value, MOS tube and Schottky diode withstand voltage must be greater than the input plus input voltage value).
Rumba 3d printer controller New
HYY-YY Electronic Generator Controller, DGS6110U Control Panel LCD Display Controller Module with 1pcs Black Gasket and 4pcs Set Screws
  • LCD display with backlight, optional language interface, push-button operation.
  • Added power monitoring and power generation automatic switching control function (AMF).
  • With the key of load test, the controller can be placed in manual test mode. In this mode, when the generation is normal, the generator set will automatically load operation.
  • Eight languages (Chinese, English, Spanish, Russian, Portuguese, Turkish, polish, French).
  • 100% and high quality.

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Rumba 3d printer controller. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Rumba 3d printer controller give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

HYY-YY Electronic Generator Controller, DGS6110U Control Panel LCD Display Controller Module with 1pcs Black Gasket and 4pcs Set Screws
  • LCD display with backlight, optional language interface, push-button operation.
  • Added power monitoring and power generation automatic switching control function (AMF).
  • With the key of load test, the controller can be placed in manual test mode. In this mode, when the generation is normal, the generator set will automatically load operation.
  • Eight languages (Chinese, English, Spanish, Russian, Portuguese, Turkish, polish, French).
  • 100% and high quality.
HYY-YY CCMmini Mini Motor Controller PWM DC Motor Governor Board Speed Control Module 3A 6V/12V/24V Universal Spot Steuermodul
  • 2. Then the motor can be positive and negative, when the direction of operation and expectations do not match, you can adjust the line order to change the direction.
  • 4.Not suitable for brushless DC motor speed; also can not be used as a voltage regulator !
  • 1. This is not a power module, must be connected to the motor to speed, do not take the motor multimeter output does not change.
  • 3. This governor is used for DC brush motor.
  • The products in our shop have many characteristics. Welcome to our shop to visit other styles of products. If you have any questions, please feel free to ask questions. We will reply your questions within 24 hours. Your satisfaction is our biggest goal
HYY-YY 10V-55V DC PWM Controller with Reversing Direction Switch Digital Display Motor Speed Controller Regulator Module
  • WITH DIGITAL DISPLAY-- Motor Speed Controller is designed with a digital display that shows the rate in percent of actual speed to maximum speed.
  • ADOPT HIGH QUALITY CIRCUIT BOARD-- Voltage Regulator is made with high quality circuit board which ensures a longer service life, high stability and reliability
  • WITH MATEL CASE-- This simple and easy-to-use DC motor speed controller comes with a matel case which can protect the circuit board
  • EASY OPERATION-- This motor speed controller would allow setting direction of rotation that accomplishes reversing the motor's direction.
  • QUICK HEAT DISSIPATION-- Well design case can protect the controller board from damage as well as dissipate heat.
HYY-YY LCD Digital Display Buck-Boost Adjustable Power Supply High Efficiency Module Board Constant Voltage Constant Current Crystal Voltmeter Ammeter Spot Steuermodul
  • -Can be boosted, can be stepped down, output voltage 0.5-30V arbitrary regulation, limit current 0-4A arbitrary regulation;Anti-backflow at the output end, no additional anti-backup diode is required to charge the battery.
  • -The button controls the ON/OFF status of the output, and can be set to default to ON or OFF.
  • -Output ripple is small, with LC filter;Contain heat sink, send module support isolation column.
  • -LCD can display input and output voltage, output current output power;Anti-reverse protection at the input end, reverse connection will not burn.
  • -Using buck-boost chip as the main controller, external 60V 75A MOS tube as switch, dual 60V 5A SS56 Schottky rectifier, 60V voltage value, better than the market XL6009/LM2577 immature program (many devices resistance Insufficient voltage value, MOS tube and Schottky diode withstand voltage must be greater than the input plus input voltage value).
HYY-YY 10-60V 35A DC Motor Controller PWM Stepless Switch PCBA Module
  • Terminal : Barrier Terminal Block
  • Speed Regulation:PWM Stepless regulation
  • Maximum Output Wattage:2000W
  • Maximum Output Current:35A
  • Working Voltage:10-60VDC

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Rumba 3d printer controller actually costs.

Latest Rumba 3d printer controller
3D Printer Controller Tango V1.0 3d control board upgraded of Rumba controller for 3D Printer
  • Easy to Install: Compared with other 3D printer control board(such as RAMPS, etc.), the Tango V1.0 support more motor drivers, Reduce some straight plug-in part, which improve the connectivity and stability
  • LCD expansion interface,support LCD screen and SD expansion interface, it can achieve offline printing
  • Using ATMEGA2560 as the main control chip, with high-performance USB to UART chip CP2102,it is compatible to all related RAMPS firmware
  • Five ADC interfaces for temperature measurement, three nozzle temperature measurement, one hot bed temperature measurement, and one ambient temperature measurement
  • Six-way PWM: Three control nozzle heating, one control the heating of the hot bed, two control fan rotation; Six-way limit
Latest Rumba 3d printer controller
Latest Rumba 3d printer controller
JIAHONG Accessories 3D Printer Part Tango V1.0 Control Board Upgraded Rumba Controller Board Support Multi-Color Printing for 3D Printer 3D Printer
  • Five ADC interfaces for temperature measurement, three nozzle temperature measurement, one hot bed temperature measurement, and one ambient temperature measurement
  • Using ATMEGA2560 as the main control chip, with high- USB to UART chip CP2102,it is compatible to all related RAMPS firmware
  • LCD expansion interface,support LCD screen and expansion interface, it can achieve offline printing
  • Integrated design, installed easily. Compared with other 3D printer control board(such as RAMPS, etc.), the Tango V1.0 support more motor drivers, Reduce some straight plug-in part, which improve the connectivity and stability
  • We strive to answer all questions and resolve any problems as quickly as possible. Your satisfication is Our Goal! Thank you!
Latest Rumba 3d printer controller
Easy to Repair for Tango Mainboard Integrated Motherboard for Tango V1.0 Base On for Rumba Smsrt Controller for MEGA2560 Processor for 3D Printer Printer Parts
  • Dimension:150mm*75mm
  • Power output: 12-24V
  • Support motor Number: six
  • Support motor driver: A4988、DRV8825、TMC2100
  • Controller screen: LCD2004、LCD12864 ,
Latest Rumba 3d printer controller
DTOYZ Integrated Motherboard TANGO V1.0 Base On Rumba Smsrt Controller MEGA2560 Processor For 3D Printer
  • Power output: 12-24V
  • Support motor Number: six
  • Support motor driver: A4988、DRV8825、TMC2100
  • Controller screen: LCD2004、LCD12864 ,
  • For more detailed information, please browse the product description, please confirm whether the product is what you need before placing an order.
Latest Rumba 3d printer controller
Apricot blossom 3D Printer Part Tango V1.0 Control Board Upgraded Rumba Controller Board Support Multi-Color Printing Fit For 3D Printer (Color : Black)
  • Installation is simple and easy to use.
  • Integrated design, installed easily. Compared with other 3D printer control board(such as RAMPS, etc.), the Tango V1.0 support more motor drivers, Reduce some straight plug-in part, which improve the connectivity and stability LCD expansion interface,support LCD sn and SD expansion interface,
  • it can achieve offline printing Using ATMEGA2560 as the main control chip, with high-performance USB to UART chip CP2102,it is compatible to all related RAMPS firmware.
  • Five ADC interfaces for temperature measurement, three nozzle temperature measurement, one hot bed temperature measurement, and one ambient temperature measurement.
  • Six-way PWM: Three control nozzle heating, one control the heating of the hot bed, two control fan rotation; Six-way limit switch; Xmin/Xmax, Ymin/Ymax, Zmin/Zmax can be connected to sensors such as mechanical switches, optical switches, and proximity switches.
Latest Rumba 3d printer controller
Allamp 3D Printer Part Tango V1.0 Control Board Upgraded Rumba Controller Board Support Multi-Color Printing for 3D Printer
  • Five ADC interfaces for temperature measurement, three nozzle temperature measurement, one hot bed temperature measurement, and one ambient temperature measurement
  • Using ATMEGA2560 as the main control chip, with high- USB to UART chip CP2102,it is compatible to all related RAMPS firmware
  • Integrated design, installed easily. Compared with other 3D printer control board(such as RAMPS, etc.), the Tango V1.0 support more motor drivers, Reduce some straight plug-in part, which improve the connectivity and stability
  • LCD expansion interface,support LCD screen and expansion interface, it can achieve offline printing
  • Six-way PWM: Three control nozzle heating, one control the heating of the hot bed, two control fan rotation; Six-way limit switch; Xmin/Xmax, Ymin/Ymax, Zmin/Zmax can be connected to sensors such as mechanical switches, optical switches, and proximity switches
Latest Rumba 3d printer controller
3D Printer Controllers 3D Printer Upgraded 12V Rumba Plus Integrated Mainboard Control Board with 6xA4988 Stepper Driver (Color : Black, Size : One size)
  • Offers a variety comprehensive learning kits and tutorials to help the hobbyists from entry to the proficient. In this open-source world, we would like to provide you with various interesting products.
  • 1. Rumba uses an integrated 3D printer control board based on the ATmega2560 AVR processor, which is designed for CNC machinings such as 3D printers, engraving machines, cutting machines.
  • 2. You can use a personal computer to control the 3D printer via a USB cable connection or print directly from the SD card.
  • 3. Thanks to the integrated design, easy installation and commissioning, and the use of the common IDE as development software, firmware upgrades, the 4. Compared with the common 3D printing control board (such as RAMPS) in the market, there is one more motor drive, which reduces the part of the straight plug part, which improves the connectivity and stability.
  • 5. Size: 135mm*175mm.
Latest Rumba 3d printer controller
for Tango Mainboard Integrated Motherboard for Tango V1.0 Base On for Rumba Smsrt Controller for MEGA2560 Processor for 3D Printer
  • Dimension:150mm*75mm
  • Power output: 12-24V
  • Support motor Number: six
  • Support motor driver: A4988、DRV8825、TMC2100
  • Controller screen: LCD2004、LCD12864 ,

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Rumba 3d printer controller could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Rumba 3d printer controller which are among the cheapest on the market. Just scroll through the list to find Rumba 3d printer controller the cheapest products.

Catalog

The product Rumba 3d printer controller can be found in the dedicated catalog where the entire list of products on sale is presented.

Rumba 3d printer controller is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Rumba 3d printer controller New
HYY-YY Wireless Wireless Receiver Module For Doorbell, Size - 3 X 1.3cm
  • Application: Car remote control door switch (RKE), door opener remote control, wireless alarm, wireless door bell, wireless controller, wireless data transmission
  • Good local oscillator radiation suppression ability, multiple receiver modules can work together (transmit individually and multiple-receiving) and do not interfere with each other, not affect the receiving distance
  • Supply Voltage: 3.3V-5.5V; Working Temperature: -30℃ to 85℃
  • Receive Sensitivity: -107dBm; Working Frequency:
  • The products in our shop have many characteristics. Welcome to our shop to visit other styles of products. If you have any questions, please feel free to ask questions. We will reply your questions within 24 hours. Your satisfaction is our biggest goal
Rumba 3d printer controller New
HYY-YY 10V-55V DC PWM Controller with Reversing Direction Switch Digital Display Motor Speed Controller Regulator Module
  • WITH DIGITAL DISPLAY-- Motor Speed Controller is designed with a digital display that shows the rate in percent of actual speed to maximum speed.
  • ADOPT HIGH QUALITY CIRCUIT BOARD-- Voltage Regulator is made with high quality circuit board which ensures a longer service life, high stability and reliability
  • WITH MATEL CASE-- This simple and easy-to-use DC motor speed controller comes with a matel case which can protect the circuit board
  • EASY OPERATION-- This motor speed controller would allow setting direction of rotation that accomplishes reversing the motor's direction.
  • QUICK HEAT DISSIPATION-- Well design case can protect the controller board from damage as well as dissipate heat.
Rumba 3d printer controller New
HYY-YY With Optocoupler Protection DC5V 2 Wa 2CH Channel Rela Module Woodworking Tools
  • Eas to use, just learn the code of the remote control and the receiver controller.
  • The module uses genuine qualit rela, normall open interfaces
  • The interface design of human nature, all interfaces are available through a direct connection terminal leads, ver convenient
  • High stabilit and low power consumption.
  • The products in our shop have many characteristics. Welcome to our shop to visit other styles of products. If you have any questions, please feel free to ask questions. We will reply your questions within 24 hours. Your satisfaction is our biggest goal
Rumba 3d printer controller New
HYY-YY 10-60V 35A DC Motor Controller PWM Stepless Switch PCBA Module
  • Terminal : Barrier Terminal Block
  • Speed Regulation:PWM Stepless regulation
  • Maximum Output Wattage:2000W
  • Maximum Output Current:35A
  • Working Voltage:10-60VDC
Rumba 3d printer controller New
HYY-YY 3D Printer RAMPS 1.4 Controller + MEGA2560 R3 + A4988 With Heat Sink USB Calbe Jumper Kit
  • The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package for low cost
  • RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion
  • Additionally, a number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack
  • With the boot-loader, download the program directly via USB without having to go through other external writer
Rumba 3d printer controller New
HYY-YY CCMmini Mini Motor Controller PWM DC Motor Governor Board Speed Control Module 3A 6V/12V/24V Universal Spot Steuermodul
  • 2. Then the motor can be positive and negative, when the direction of operation and expectations do not match, you can adjust the line order to change the direction.
  • 4.Not suitable for brushless DC motor speed; also can not be used as a voltage regulator !
  • 1. This is not a power module, must be connected to the motor to speed, do not take the motor multimeter output does not change.
  • 3. This governor is used for DC brush motor.
  • The products in our shop have many characteristics. Welcome to our shop to visit other styles of products. If you have any questions, please feel free to ask questions. We will reply your questions within 24 hours. Your satisfaction is our biggest goal
Rumba 3d printer controller New
HYY-YY XY-T01 Digital Thermostat Heating Refrigeration Temperature Control Switch Temperature Controller Module
  • The products in our shop have many characteristics. Welcome to our shop to visit other styles of products. If you have any questions, please feel free to ask questions. We will reply your questions within 24 hours. Your satisfaction is our biggest goal
Rumba 3d printer controller New
HYY-YY LCD Digital Display Buck-Boost Adjustable Power Supply High Efficiency Module Board Constant Voltage Constant Current Crystal Voltmeter Ammeter Spot Steuermodul
  • -Can be boosted, can be stepped down, output voltage 0.5-30V arbitrary regulation, limit current 0-4A arbitrary regulation;Anti-backflow at the output end, no additional anti-backup diode is required to charge the battery.
  • -The button controls the ON/OFF status of the output, and can be set to default to ON or OFF.
  • -Output ripple is small, with LC filter;Contain heat sink, send module support isolation column.
  • -LCD can display input and output voltage, output current output power;Anti-reverse protection at the input end, reverse connection will not burn.
  • -Using buck-boost chip as the main controller, external 60V 75A MOS tube as switch, dual 60V 5A SS56 Schottky rectifier, 60V voltage value, better than the market XL6009/LM2577 immature program (many devices resistance Insufficient voltage value, MOS tube and Schottky diode withstand voltage must be greater than the input plus input voltage value).
Rumba 3d printer controller New
HYY-YY Electronic Generator Controller, DGS6110U Control Panel LCD Display Controller Module with 1pcs Black Gasket and 4pcs Set Screws
  • LCD display with backlight, optional language interface, push-button operation.
  • Added power monitoring and power generation automatic switching control function (AMF).
  • With the key of load test, the controller can be placed in manual test mode. In this mode, when the generation is normal, the generator set will automatically load operation.
  • Eight languages (Chinese, English, Spanish, Russian, Portuguese, Turkish, polish, French).
  • 100% and high quality.

Where to buy?

If you are asking yourself where to buy Rumba 3d printer controller? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Rumba 3d printer controller, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Rumba 3d printer controller and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Rumba 3d printer controller may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Rumba 3d printer controller used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Rumba 3d printer controller at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

HYY-YY Electronic Generator Controller, DGS6110U Control Panel LCD Display Controller Module with 1pcs Black Gasket and 4pcs Set Screws
  • LCD display with backlight, optional language interface, push-button operation.
  • Added power monitoring and power generation automatic switching control function (AMF).
  • With the key of load test, the controller can be placed in manual test mode. In this mode, when the generation is normal, the generator set will automatically load operation.
  • Eight languages (Chinese, English, Spanish, Russian, Portuguese, Turkish, polish, French).
  • 100% and high quality.
HYY-YY CCMmini Mini Motor Controller PWM DC Motor Governor Board Speed Control Module 3A 6V/12V/24V Universal Spot Steuermodul
  • 2. Then the motor can be positive and negative, when the direction of operation and expectations do not match, you can adjust the line order to change the direction.
  • 4.Not suitable for brushless DC motor speed; also can not be used as a voltage regulator !
  • 1. This is not a power module, must be connected to the motor to speed, do not take the motor multimeter output does not change.
  • 3. This governor is used for DC brush motor.
  • The products in our shop have many characteristics. Welcome to our shop to visit other styles of products. If you have any questions, please feel free to ask questions. We will reply your questions within 24 hours. Your satisfaction is our biggest goal
HYY-YY 10V-55V DC PWM Controller with Reversing Direction Switch Digital Display Motor Speed Controller Regulator Module
  • WITH DIGITAL DISPLAY-- Motor Speed Controller is designed with a digital display that shows the rate in percent of actual speed to maximum speed.
  • ADOPT HIGH QUALITY CIRCUIT BOARD-- Voltage Regulator is made with high quality circuit board which ensures a longer service life, high stability and reliability
  • WITH MATEL CASE-- This simple and easy-to-use DC motor speed controller comes with a matel case which can protect the circuit board
  • EASY OPERATION-- This motor speed controller would allow setting direction of rotation that accomplishes reversing the motor's direction.
  • QUICK HEAT DISSIPATION-- Well design case can protect the controller board from damage as well as dissipate heat.
HYY-YY LCD Digital Display Buck-Boost Adjustable Power Supply High Efficiency Module Board Constant Voltage Constant Current Crystal Voltmeter Ammeter Spot Steuermodul
  • -Can be boosted, can be stepped down, output voltage 0.5-30V arbitrary regulation, limit current 0-4A arbitrary regulation;Anti-backflow at the output end, no additional anti-backup diode is required to charge the battery.
  • -The button controls the ON/OFF status of the output, and can be set to default to ON or OFF.
  • -Output ripple is small, with LC filter;Contain heat sink, send module support isolation column.
  • -LCD can display input and output voltage, output current output power;Anti-reverse protection at the input end, reverse connection will not burn.
  • -Using buck-boost chip as the main controller, external 60V 75A MOS tube as switch, dual 60V 5A SS56 Schottky rectifier, 60V voltage value, better than the market XL6009/LM2577 immature program (many devices resistance Insufficient voltage value, MOS tube and Schottky diode withstand voltage must be greater than the input plus input voltage value).
HYY-YY 10-60V 35A DC Motor Controller PWM Stepless Switch PCBA Module
  • Terminal : Barrier Terminal Block
  • Speed Regulation:PWM Stepless regulation
  • Maximum Output Wattage:2000W
  • Maximum Output Current:35A
  • Working Voltage:10-60VDC

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Rumba 3d printer controller.

Rating: 3.33 of 5 - 21 votes
1 Star2 Stars3 Stars4 Stars5 Stars (21 votes, average: 3.33 out of 5)
Loading...