Repetier host 3d printer Reviews and Best Deals

Online product reviews and comparisons for Repetier host 3d printer.

Latest Repetier host 3d printer
Comgrow Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 pro/Ender 5 3D Printer 235X235mm
  • ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
  • EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
  • CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
  • SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
  • UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
Latest Repetier host 3d printer
Genuine Capricorn Premium Tubing Bowden PTFE Tubing XS Series 1.2M for 1.75mm Filament with 1PCS PC4-M6 Pneumatic Fitting Push to Connect and 1 PCS PC4-M10 Straight Quick in Fitting for 3D Printer
  • Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm ± 0.05mm internal diameter. Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
  • Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
  • High Temperature Resistance due to using only the highest quality PTFE. Capricorn XS tubing will operate at even higher temperatures than our TL.
  • PC4-M6 fittings: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable. PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion.
Latest Repetier host 3d printer
Redrex Upgraded Aluminum Bowden Extruder with 40 Teeth MK8 Drive Gear for Creality Ender 3 V2,Ender 3 Pro,CR-10 Series and other Reprap Prusa 3D Printers
  • Bowden extrusion are supported:It comes with a nema stepper motor mount,works great on TEVO Tarantula i3,Anycubic Kossel i3 Mega,Flsun i3,MP Select and other bowden extrusion 3d printers as well.
  • Direct extrusion are supported:This upgrade parts can also work as MK8 extruder frame with some modifications
  • Recommend filament materials:PLA/ABS/Wood/TPU/PTEG,40 Teeth drive gear feeds the 1.75mm filament very smoothy.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Latest Repetier host 3d printer
Creality Upgraded Direct Extruder Kit for Ender 3, Ender 3 Pro, Ender 3 V2,Comes with Direct Extruding Mechanism and Complete Hotend Kit, Support BL Touch
  • Upgraded direct ectruder kit for Ender 3, Ender 3 Pro and Ender 3 V2 3D Printer. Customer Services: If you have any question or need technical support about the product, Please press "Ask a question" through our storefront's page, report an issue through the “Your Orders” page. We will respond with 24 hours.
  • Support all 1.75mm diameter filament in the market, offers more precise and smoother extrusion.
  • Perfect for PLA and optimize the performance of remote printing with TPU and other flexible filaments.
  • Comes with 42-40 stepper motor. This direct extruder kit is made of aluminum alloy and plastic, durable and wear resistant.
  • With longer Extruder motor connecting cable, tools, accessories and wiring diagram instruction for installation, easy to assemble.
Latest Repetier host 3d printer
Upgraded Ender 3 Extruder, Vibury MK8 Extruder Aluminum Drive Feed Replacement 3D Printer Extruders Kit for Creality Ender 3/3 Pro CR-10, CR-10S, CR-10 S4, CR-10 S5 Right Hand Version
  • Upgrade Aluminum Replacement: Full metal aluminum alloy. MK8 extruder drive feed kit, can replace acrylic parts of Creality 3D Printers CR-10 Series Ender 3/3 Pro CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
  • Easy to Install: All you do is unbolt the old original plastic extruder and screw in the new "Metal Extruder", then it is ready to print. Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame.
  • Stable and Durable: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hot end include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.
  • Advantages: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers' performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
  • Buy with confidence: For 12 months after the date of purchase, we take care of all quality-related issues with a Money Back Or Products Exchange Guarantee.
Latest Repetier host 3d printer
TENLOG Hands 2 Independent Dual Extruder 3D Printer,300 Degree High Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS,220x220x250mm
  • 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
  • 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
  • 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
  • 【Warranty and Assemble】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
DISCOUNTLatest Repetier host 3d printer
ELEGOO Mars Pro MSLA 3D Printer UV Photocuring LCD 3D Printer with Matrix UV LED Light Source, Built-In Activated Carbon,Off-Line Print 4.53in(L) x 2.56in(W) x 5.9in(H) Printing Size
  • 【Higher Precision and Excellent Performance】Z axis utilizes linear guideway structure, which achieves steadier motion and greatly enhanced moving accuracy to reduce the layer lines on the 3D printed model and make the surface much smoother. The set screws of the build plate are now upgraded to larger anti-slip hexagon socket screws, which have a more stable leveling result. CNC turning CD pattern on the build plate provides a much stronger adherence, especially when printing large 3D models.
  • 【No Irritative Odor Experience】Mars Pro comes with a silicone rubber seal that can be put on the cover to prevent the resin odor from leaking. Built-in activated carbon can absorb and filter the resin odor before they are ventilated throughout the cooling fan, which gives you a fresh and safe user experience.
  • 【Light and Convenient 】Remodeled resin vat made of aluminum alloy is light yet sturdy. The USB port is relocated to the front for your convenience. Mars Pro uses a new user interface with a dark theme and simple design.
  • 【Qulity Prints and Consistent Success】Matrix light source consists of 28 50Watt UV LED lights that have uniform light emission, ensuring superior printing results, a more accurate printing size, and saves your time by 25% in layer exposure time. Mars Pro is the first resin-based 3D printer to use the sliced file of .ctb format, which reduces the file size by an average of 90% compared to .cbddlp format and significantly increases the printing success rate when printing bigger models.
  • 【Warranty and Privilege 】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded). Parts and replacements will be shipped from the overseas warehouse to offer you quality and fast customer service.
DISCOUNTLatest Repetier host 3d printer
Iverntech Upgraded Dual Drive BMG Extruder for CR10,Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer
  • Dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385
  • Adjustable Tension: The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament
  • Suitable for most 3D printers and filaments
  • Warranty: free return/ exchange in 90 days
  • Packing with: 1x Bowden BMG Extruder, 1 x Universal Stepper Motor Bracket
Latest Repetier host 3d printer
3D Printer Glue Sticks, Aitrip 4Pcs Solid Stickers for 3D Printer Hot Bed Print Filament PLA ABS PET PETG and Other More
  • Work well on all 3D Printer hot bed, no matter build surface sheet plate, aluminum bed or glass plate, CR 10 CR10S S4 S5 Prusa Kossel Wanhao Ultimaker XYZ printing Tevo Lulzbot Reprpa Monoprice Printer and more
  • Easy application, Easy release, Easy clean, Non-toxic, Acid-free, washes off 3D Printer build plate easily with water.
  • Long-lasting and High-quality, last for 100+ average prints, helps 3D print parts adhere to the build plate during printing.
  • Use it on hot bed before printing, strong adhesion to the hot plate, perfect first layer, It is easier to remove the printing models.
  • The glue sticks also for arts and crafts, school projects, and more. Please replace the lid when finished to prevent stored glue from drying out.

Buy Repetier host 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Repetier host 3d printer, buy Repetier host 3d printer directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Repetier host 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


DISCOUNTBest
ELEGOO Mars Pro MSLA 3D Printer UV Photocuring LCD 3D Printer with Matrix UV LED Light Source, Built-In Activated Carbon,Off-Line Print 4.53in(L) x 2.56in(W) x 5.9in(H) Printing Size
  • 【Higher Precision and Excellent Performance】Z axis utilizes linear guideway structure, which achieves steadier motion and greatly enhanced moving accuracy to reduce the layer lines on the 3D printed model and make the surface much smoother. The set screws of the build plate are now upgraded to larger anti-slip hexagon socket screws, which have a more stable leveling result. CNC turning CD pattern on the build plate provides a much stronger adherence, especially when printing large 3D models.
  • 【No Irritative Odor Experience】Mars Pro comes with a silicone rubber seal that can be put on the cover to prevent the resin odor from leaking. Built-in activated carbon can absorb and filter the resin odor before they are ventilated throughout the cooling fan, which gives you a fresh and safe user experience.
  • 【Light and Convenient 】Remodeled resin vat made of aluminum alloy is light yet sturdy. The USB port is relocated to the front for your convenience. Mars Pro uses a new user interface with a dark theme and simple design.
  • 【Qulity Prints and Consistent Success】Matrix light source consists of 28 50Watt UV LED lights that have uniform light emission, ensuring superior printing results, a more accurate printing size, and saves your time by 25% in layer exposure time. Mars Pro is the first resin-based 3D printer to use the sliced file of .ctb format, which reduces the file size by an average of 90% compared to .cbddlp format and significantly increases the printing success rate when printing bigger models.
  • 【Warranty and Privilege 】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded). Parts and replacements will be shipped from the overseas warehouse to offer you quality and fast customer service.
Best
Genuine Capricorn Premium Tubing Bowden PTFE Tubing XS Series 1.2M for 1.75mm Filament with 1PCS PC4-M6 Pneumatic Fitting Push to Connect and 1 PCS PC4-M10 Straight Quick in Fitting for 3D Printer
  • Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm ± 0.05mm internal diameter. Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
  • Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
  • High Temperature Resistance due to using only the highest quality PTFE. Capricorn XS tubing will operate at even higher temperatures than our TL.
  • PC4-M6 fittings: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable. PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion.
Best
Comgrow Creality 3D Ender 3 Pro 3D Printer with Cmagnet Build Plateform Surface Meanwell Power Supply Unit 220x220x250mm Print Size
  • Cmagnet Build Surface Plate: Flat surface for 3D printer, flat, protects the surface. The print models can be easily removed after cooling.
  • Meanwell Power Supply Unit: Ender 3 Pro with a UL-certified power supply, protects your printer from inexact power supply and can be heated up to 110 ° C in just 5 minutes.
  • 40x40 Y Axis Profile: Ender 3 Pro adopt 40x40 Y axis profile, this would be helpful to make the hot bed more stable. Then make the quallity of the print model better.
  • Semi Assebled Kit: Multiple Pieces Assembled This easy-to-set-up kit comes partially assembled so that once you assemble it, you can learn more about the basic setup of 3D printers. An entertaining STEM training in mechanical engineering and electronics.
  • WHAT CAN WE DO: As an authorized dealer of Creality 3D, we can offer you 100% original products. And can also offer you professional after-sales service.
Best
Comgrow Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 pro/Ender 5 3D Printer 235X235mm
  • ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
  • EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
  • CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
  • SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
  • UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
Best
Upgraded Ender 3 Extruder, Vibury MK8 Extruder Aluminum Drive Feed Replacement 3D Printer Extruders Kit for Creality Ender 3/3 Pro CR-10, CR-10S, CR-10 S4, CR-10 S5 Right Hand Version
  • Upgrade Aluminum Replacement: Full metal aluminum alloy. MK8 extruder drive feed kit, can replace acrylic parts of Creality 3D Printers CR-10 Series Ender 3/3 Pro CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
  • Easy to Install: All you do is unbolt the old original plastic extruder and screw in the new "Metal Extruder", then it is ready to print. Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame.
  • Stable and Durable: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hot end include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.
  • Advantages: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers' performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
  • Buy with confidence: For 12 months after the date of purchase, we take care of all quality-related issues with a Money Back Or Products Exchange Guarantee.

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Repetier host 3d printer

Here is the ranking of the best Repetier host 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Repetier host 3d printer and read the reviews left by real customers, see the Repetier host 3d printer ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Repetier host 3d printer New
3d Printer Extruder,3d Printer Heating Element,3d Printer Part Hotend Kit Extruder Remote Terminal Set 1.75mm/0.07in 0.4mm/0.02in For V6
  • UPGRADE KITS MAINLY USED FOR EXTRUDERS: including aluminum blocks, nozzles and heating rods, to meet all your needs.
  • EASY TO USE AND QUICK TO INSTALL: and will not take up much of your time, very convenient.
  • WITH COMPACT SHAPE: lightweight and portable, take up no space and you can put it anywhere.
  • MADE OF HIGH QUALIY MATERIAL OF ALUMINIUM:which makes it durable and have high reliability.
  • BUILT TO STRICT QUALITY CONTROL STANDARDS: design improved for high quality.
Repetier host 3d printer New
with Wear‑resistant Extruder Nozzle 4Pcs 3D Printer Nozzles Set For Cr‑10 All Metal Thermal Kit for 3D Printer
  • The product is very suitable for high temperature 3D printing that other nozzles cannot handle
  • This Ti nozzle can be used for CR‑10 all metal thermal kit and other MK8 MK9 extruder and 3D printer
  • This nozzle is made of high quality Ti alloy material, come with high temperature flexibility
  • For MK8 nozzle is durable, non‑stick, have strong corrosion‑resistant and wear‑resistant
  • Inner surface is very glossy(not cheap nozzles on the market), so you can print without worrying about jams
Repetier host 3d printer New
DISCOUNTRepetier host 3d printer New
Iverntech Upgraded Dual Drive BMG Extruder for CR10,Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer
  • Dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385
  • Adjustable Tension: The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament
  • Suitable for most 3D printers and filaments
  • Warranty: free return/ exchange in 90 days
  • Packing with: 1x Bowden BMG Extruder, 1 x Universal Stepper Motor Bracket
Repetier host 3d printer New
Printers Accessory, Aluminum 3D Printers Accessory, Durable Easy Installation Reliable for Hot End Extruder
  • The new MDD V1.2 is the simplest direct drive conversion available for Creality Ender‑3, for CR‑10 3D printers.
  • Simplest direct‑drive system for Creality 3D printers. Practical accessory.
  • Lighter than most direct drives, installation takes about 20‑30 minutes ‑ no firmware changes, no volume loss, no cutting or splicing.
  • There is no need to change the firmware when using extruder and hot ends, although we recommend starting with configuration file retracting 1.0mm and turning off the softening control (sliding, wiping, etc.).
  • MDD is compatible with many extruder and is designed to turn your inventory components into powerful direct‑drive systems without the need for other hardware.
Repetier host 3d printer New
SODIAL 3 Pcs 3D Printing Accessories: 2 Set CR-10 Y Motor Plate Set Motor Fixing Bracket & 1 Set SKR V1.3 32-Bit DIY Controller
  • 4. Motor drive interface: XYZ, EO, E1, five channels (each channel has a re-expandable interface), up to 256 subdivisions
  • 5. Expanded interface function support: power-off continuous , material breakage detection, shutdown after playing, automatic leveling, BL Press, 3 D Press
  • 1.3D printer, SKR V1.3 control motherboard, 32-bit processor, open source firmware, strong compatibility. 2. Input voltage: DC12V-DC24V 5A-15A. 3. Drive working mode support: TMC2130 SPI, TMC2208UART
  • 3 pcs 3D Printing Accessories: 2 set CR-10 Y Motor Plate Set & 1 set SKR V1.3 32-Bit DIY Controller
  • 6. Support file format: G-code. 7. Recommended software: Cura, Simplify 3D pronterface, Repetier-host, Makerware. 8. Support machine structure: XYZ, Delta, Kossel, Ultimaker, Corexy
Repetier host 3d printer New
Aibecy Dual Print Head Extruder Full Kit, with 0.4mm Brass Nozzle, for 1.75mm Filament, Compatible with Ultimaker2 DIY Model 3D Printer
  • 100% brand new high quality accessories for 3D printer.
  • High-quality linear bearing, classic cross shaft slide design, smooth sliding.
  • High expansibility, can install double cooling air duct.
  • Improve thick wall PTFE parts, more reliable and durable.
  • Compatible with Ultimaker2 and cross-axis 3D printers.
Repetier host 3d printer New
Creality Ender 3 Max 3D Printer 300 x 300 x 340mm, 2020 Newest All Metal FDM 3D Printer with Larger Glass Bed Silent Mainboard All Metal Extruder Smart Sensor Dual Cooling Fans
  • 【Max workspace】 Creality Ender 3 Max offers a large build volume of 300x300x340mm allowing you to expand your creative possibilities. Even though it has the same price with ender 5, With the ender 3 max, you will have more choices because of the max workspace.
  • 【Modular hotend】The Ender 3 Max has a newly developed hot-end design and simplifies the exchange of individual components. In addition, the hotend has dual fans that allow better heat dissipation. An integrated copper nozzle enables better heat resistance and faster melting of the materials.
  • 【Proven stable structure】Even movements and stable printing are made possible thanks to the proven stable structure with a precise Z-axis leadscrew and V-slot profiles.
  • 【Intelligent functions】The Creality Ender 3 Max is equipped with a filament sensor and a resume print function. If the filament accidentally runs out or an unexpected power failure occurs, you can easily and conveniently resume printing. This saves you valuable material and time.
  • 【Carborundum Glass Platform 】This glass plate is a popular upgrade for a 3D printer because of its very good adhesion and fast heating-up speed. The smooth first layer also increases the aesthetics of your finished models. With the Ender 3 Max, you no longer have to buy this upgrade because the 3D printer already includes it.
Repetier host 3d printer New
QIDI TECH i mates 3D Printer,2021 Newest Commercial Grade FDM 3D Printer With Two Kinds of Extruders ,Printing Size 260x200x200mm
  • Excellent industrial design, high-end manufacturing, it can be used out of the box. We adhere to high-standard production, strict process requirements, full mold design of the whole 3d printer,it is safer. Both closed printing and ventilated printing can be done on this 3d printer .When printing ABS and other filament which need to be closed printing, the printing effect is better. Really out of the box, open the package, take out the complete 3d printer directly without any tedious assembly.
  • Outstanding industrial structure. QIDI Technology has always adhered to the use of high-end industrial-grade FDM structure. The printing principle is different from theDIY structure. When printing large models, it is more stable and more accurate! The print size is 260×200×200, which can basically meet the daily printing needs
  • Unique extruder and special printing platform. QIDI's newly developed extruder, with a nozzle of 0.2mm,it can print the surface of the model more delicately, with an accuracy higher than that of the 0.4mm nozzle.The i mates 3d printer will be equipped with one set of 0.4 mm extruder and one set of 0.2mm extruder.
  • Excellent user experience, friendly UI interface.It’s equipped with self-developed QIDI slicing software, two modes can be selected: normal mode and expert mode. The normal mode is suitable for novices, the parameter system has been intelligently set, no other operations are required, it is very simple. Expert mode is suitable for experienced users, who can deeply participate in modifying parameters and personalized printing models.
  • Silent printing. A break point can be saved and the printing can be continued later. If power outage is occurred during the printing process, the printer will automatically save the break point.

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Repetier host 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Repetier host 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

QIDI TECH i mates 3D Printer,2021 Newest Commercial Grade FDM 3D Printer With Two Kinds of Extruders ,Printing Size 260x200x200mm
  • Excellent industrial design, high-end manufacturing, it can be used out of the box. We adhere to high-standard production, strict process requirements, full mold design of the whole 3d printer,it is safer. Both closed printing and ventilated printing can be done on this 3d printer .When printing ABS and other filament which need to be closed printing, the printing effect is better. Really out of the box, open the package, take out the complete 3d printer directly without any tedious assembly.
  • Outstanding industrial structure. QIDI Technology has always adhered to the use of high-end industrial-grade FDM structure. The printing principle is different from theDIY structure. When printing large models, it is more stable and more accurate! The print size is 260×200×200, which can basically meet the daily printing needs
  • Unique extruder and special printing platform. QIDI's newly developed extruder, with a nozzle of 0.2mm,it can print the surface of the model more delicately, with an accuracy higher than that of the 0.4mm nozzle.The i mates 3d printer will be equipped with one set of 0.4 mm extruder and one set of 0.2mm extruder.
  • Excellent user experience, friendly UI interface.It’s equipped with self-developed QIDI slicing software, two modes can be selected: normal mode and expert mode. The normal mode is suitable for novices, the parameter system has been intelligently set, no other operations are required, it is very simple. Expert mode is suitable for experienced users, who can deeply participate in modifying parameters and personalized printing models.
  • Silent printing. A break point can be saved and the printing can be continued later. If power outage is occurred during the printing process, the printer will automatically save the break point.
SODIAL 3 Pcs 3D Printing Accessories: 2 Set CR-10 Y Motor Plate Set Motor Fixing Bracket & 1 Set SKR V1.3 32-Bit DIY Controller
  • 4. Motor drive interface: XYZ, EO, E1, five channels (each channel has a re-expandable interface), up to 256 subdivisions
  • 5. Expanded interface function support: power-off continuous , material breakage detection, shutdown after playing, automatic leveling, BL Press, 3 D Press
  • 1.3D printer, SKR V1.3 control motherboard, 32-bit processor, open source firmware, strong compatibility. 2. Input voltage: DC12V-DC24V 5A-15A. 3. Drive working mode support: TMC2130 SPI, TMC2208UART
  • 3 pcs 3D Printing Accessories: 2 set CR-10 Y Motor Plate Set & 1 set SKR V1.3 32-Bit DIY Controller
  • 6. Support file format: G-code. 7. Recommended software: Cura, Simplify 3D pronterface, Repetier-host, Makerware. 8. Support machine structure: XYZ, Delta, Kossel, Ultimaker, Corexy
with Wear‑resistant Extruder Nozzle 4Pcs 3D Printer Nozzles Set For Cr‑10 All Metal Thermal Kit for 3D Printer
  • The product is very suitable for high temperature 3D printing that other nozzles cannot handle
  • This Ti nozzle can be used for CR‑10 all metal thermal kit and other MK8 MK9 extruder and 3D printer
  • This nozzle is made of high quality Ti alloy material, come with high temperature flexibility
  • For MK8 nozzle is durable, non‑stick, have strong corrosion‑resistant and wear‑resistant
  • Inner surface is very glossy(not cheap nozzles on the market), so you can print without worrying about jams
Printers Accessory, Aluminum 3D Printers Accessory, Durable Easy Installation Reliable for Hot End Extruder
  • The new MDD V1.2 is the simplest direct drive conversion available for Creality Ender‑3, for CR‑10 3D printers.
  • Simplest direct‑drive system for Creality 3D printers. Practical accessory.
  • Lighter than most direct drives, installation takes about 20‑30 minutes ‑ no firmware changes, no volume loss, no cutting or splicing.
  • There is no need to change the firmware when using extruder and hot ends, although we recommend starting with configuration file retracting 1.0mm and turning off the softening control (sliding, wiping, etc.).
  • MDD is compatible with many extruder and is designed to turn your inventory components into powerful direct‑drive systems without the need for other hardware.

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Repetier host 3d printer actually costs.

Latest Repetier host 3d printer
Comgrow Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 pro/Ender 5 3D Printer 235X235mm
  • ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
  • EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
  • CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
  • SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
  • UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
Latest Repetier host 3d printer
Genuine Capricorn Premium Tubing Bowden PTFE Tubing XS Series 1.2M for 1.75mm Filament with 1PCS PC4-M6 Pneumatic Fitting Push to Connect and 1 PCS PC4-M10 Straight Quick in Fitting for 3D Printer
  • Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm ± 0.05mm internal diameter. Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
  • Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
  • High Temperature Resistance due to using only the highest quality PTFE. Capricorn XS tubing will operate at even higher temperatures than our TL.
  • PC4-M6 fittings: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable. PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion.
Latest Repetier host 3d printer
Redrex Upgraded Aluminum Bowden Extruder with 40 Teeth MK8 Drive Gear for Creality Ender 3 V2,Ender 3 Pro,CR-10 Series and other Reprap Prusa 3D Printers
  • Bowden extrusion are supported:It comes with a nema stepper motor mount,works great on TEVO Tarantula i3,Anycubic Kossel i3 Mega,Flsun i3,MP Select and other bowden extrusion 3d printers as well.
  • Direct extrusion are supported:This upgrade parts can also work as MK8 extruder frame with some modifications
  • Recommend filament materials:PLA/ABS/Wood/TPU/PTEG,40 Teeth drive gear feeds the 1.75mm filament very smoothy.
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Latest Repetier host 3d printer
Creality Upgraded Direct Extruder Kit for Ender 3, Ender 3 Pro, Ender 3 V2,Comes with Direct Extruding Mechanism and Complete Hotend Kit, Support BL Touch
  • Upgraded direct ectruder kit for Ender 3, Ender 3 Pro and Ender 3 V2 3D Printer. Customer Services: If you have any question or need technical support about the product, Please press "Ask a question" through our storefront's page, report an issue through the “Your Orders” page. We will respond with 24 hours.
  • Support all 1.75mm diameter filament in the market, offers more precise and smoother extrusion.
  • Perfect for PLA and optimize the performance of remote printing with TPU and other flexible filaments.
  • Comes with 42-40 stepper motor. This direct extruder kit is made of aluminum alloy and plastic, durable and wear resistant.
  • With longer Extruder motor connecting cable, tools, accessories and wiring diagram instruction for installation, easy to assemble.
Latest Repetier host 3d printer
Upgraded Ender 3 Extruder, Vibury MK8 Extruder Aluminum Drive Feed Replacement 3D Printer Extruders Kit for Creality Ender 3/3 Pro CR-10, CR-10S, CR-10 S4, CR-10 S5 Right Hand Version
  • Upgrade Aluminum Replacement: Full metal aluminum alloy. MK8 extruder drive feed kit, can replace acrylic parts of Creality 3D Printers CR-10 Series Ender 3/3 Pro CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus.
  • Easy to Install: All you do is unbolt the old original plastic extruder and screw in the new "Metal Extruder", then it is ready to print. Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame.
  • Stable and Durable: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hot end include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.
  • Advantages: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers' performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
  • Buy with confidence: For 12 months after the date of purchase, we take care of all quality-related issues with a Money Back Or Products Exchange Guarantee.
Latest Repetier host 3d printer
TENLOG Hands 2 Independent Dual Extruder 3D Printer,300 Degree High Temperature Nozzle,Upgrade Borosilicate Glass Bed and Silent Mainboards TMC2208 Drive Support PVA TPU PLA ABS,220x220x250mm
  • 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
  • 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
  • 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
  • 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
  • 【Warranty and Assemble】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
DISCOUNTLatest Repetier host 3d printer
ELEGOO Mars Pro MSLA 3D Printer UV Photocuring LCD 3D Printer with Matrix UV LED Light Source, Built-In Activated Carbon,Off-Line Print 4.53in(L) x 2.56in(W) x 5.9in(H) Printing Size
  • 【Higher Precision and Excellent Performance】Z axis utilizes linear guideway structure, which achieves steadier motion and greatly enhanced moving accuracy to reduce the layer lines on the 3D printed model and make the surface much smoother. The set screws of the build plate are now upgraded to larger anti-slip hexagon socket screws, which have a more stable leveling result. CNC turning CD pattern on the build plate provides a much stronger adherence, especially when printing large 3D models.
  • 【No Irritative Odor Experience】Mars Pro comes with a silicone rubber seal that can be put on the cover to prevent the resin odor from leaking. Built-in activated carbon can absorb and filter the resin odor before they are ventilated throughout the cooling fan, which gives you a fresh and safe user experience.
  • 【Light and Convenient 】Remodeled resin vat made of aluminum alloy is light yet sturdy. The USB port is relocated to the front for your convenience. Mars Pro uses a new user interface with a dark theme and simple design.
  • 【Qulity Prints and Consistent Success】Matrix light source consists of 28 50Watt UV LED lights that have uniform light emission, ensuring superior printing results, a more accurate printing size, and saves your time by 25% in layer exposure time. Mars Pro is the first resin-based 3D printer to use the sliced file of .ctb format, which reduces the file size by an average of 90% compared to .cbddlp format and significantly increases the printing success rate when printing bigger models.
  • 【Warranty and Privilege 】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded). Parts and replacements will be shipped from the overseas warehouse to offer you quality and fast customer service.
DISCOUNTLatest Repetier host 3d printer
Iverntech Upgraded Dual Drive BMG Extruder for CR10,Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer
  • Dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385
  • Adjustable Tension: The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament
  • Suitable for most 3D printers and filaments
  • Warranty: free return/ exchange in 90 days
  • Packing with: 1x Bowden BMG Extruder, 1 x Universal Stepper Motor Bracket
Latest Repetier host 3d printer
3D Printer Glue Sticks, Aitrip 4Pcs Solid Stickers for 3D Printer Hot Bed Print Filament PLA ABS PET PETG and Other More
  • Work well on all 3D Printer hot bed, no matter build surface sheet plate, aluminum bed or glass plate, CR 10 CR10S S4 S5 Prusa Kossel Wanhao Ultimaker XYZ printing Tevo Lulzbot Reprpa Monoprice Printer and more
  • Easy application, Easy release, Easy clean, Non-toxic, Acid-free, washes off 3D Printer build plate easily with water.
  • Long-lasting and High-quality, last for 100+ average prints, helps 3D print parts adhere to the build plate during printing.
  • Use it on hot bed before printing, strong adhesion to the hot plate, perfect first layer, It is easier to remove the printing models.
  • The glue sticks also for arts and crafts, school projects, and more. Please replace the lid when finished to prevent stored glue from drying out.

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Repetier host 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Repetier host 3d printer which are among the cheapest on the market. Just scroll through the list to find Repetier host 3d printer the cheapest products.

Catalog

The product Repetier host 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.

Repetier host 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Repetier host 3d printer New
3d Printer Extruder,3d Printer Heating Element,3d Printer Part Hotend Kit Extruder Remote Terminal Set 1.75mm/0.07in 0.4mm/0.02in For V6
  • UPGRADE KITS MAINLY USED FOR EXTRUDERS: including aluminum blocks, nozzles and heating rods, to meet all your needs.
  • EASY TO USE AND QUICK TO INSTALL: and will not take up much of your time, very convenient.
  • WITH COMPACT SHAPE: lightweight and portable, take up no space and you can put it anywhere.
  • MADE OF HIGH QUALIY MATERIAL OF ALUMINIUM:which makes it durable and have high reliability.
  • BUILT TO STRICT QUALITY CONTROL STANDARDS: design improved for high quality.
Repetier host 3d printer New
with Wear‑resistant Extruder Nozzle 4Pcs 3D Printer Nozzles Set For Cr‑10 All Metal Thermal Kit for 3D Printer
  • The product is very suitable for high temperature 3D printing that other nozzles cannot handle
  • This Ti nozzle can be used for CR‑10 all metal thermal kit and other MK8 MK9 extruder and 3D printer
  • This nozzle is made of high quality Ti alloy material, come with high temperature flexibility
  • For MK8 nozzle is durable, non‑stick, have strong corrosion‑resistant and wear‑resistant
  • Inner surface is very glossy(not cheap nozzles on the market), so you can print without worrying about jams
Repetier host 3d printer New
DISCOUNTRepetier host 3d printer New
Iverntech Upgraded Dual Drive BMG Extruder for CR10,Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer
  • Dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385
  • Adjustable Tension: The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament
  • Suitable for most 3D printers and filaments
  • Warranty: free return/ exchange in 90 days
  • Packing with: 1x Bowden BMG Extruder, 1 x Universal Stepper Motor Bracket
Repetier host 3d printer New
Printers Accessory, Aluminum 3D Printers Accessory, Durable Easy Installation Reliable for Hot End Extruder
  • The new MDD V1.2 is the simplest direct drive conversion available for Creality Ender‑3, for CR‑10 3D printers.
  • Simplest direct‑drive system for Creality 3D printers. Practical accessory.
  • Lighter than most direct drives, installation takes about 20‑30 minutes ‑ no firmware changes, no volume loss, no cutting or splicing.
  • There is no need to change the firmware when using extruder and hot ends, although we recommend starting with configuration file retracting 1.0mm and turning off the softening control (sliding, wiping, etc.).
  • MDD is compatible with many extruder and is designed to turn your inventory components into powerful direct‑drive systems without the need for other hardware.
Repetier host 3d printer New
SODIAL 3 Pcs 3D Printing Accessories: 2 Set CR-10 Y Motor Plate Set Motor Fixing Bracket & 1 Set SKR V1.3 32-Bit DIY Controller
  • 4. Motor drive interface: XYZ, EO, E1, five channels (each channel has a re-expandable interface), up to 256 subdivisions
  • 5. Expanded interface function support: power-off continuous , material breakage detection, shutdown after playing, automatic leveling, BL Press, 3 D Press
  • 1.3D printer, SKR V1.3 control motherboard, 32-bit processor, open source firmware, strong compatibility. 2. Input voltage: DC12V-DC24V 5A-15A. 3. Drive working mode support: TMC2130 SPI, TMC2208UART
  • 3 pcs 3D Printing Accessories: 2 set CR-10 Y Motor Plate Set & 1 set SKR V1.3 32-Bit DIY Controller
  • 6. Support file format: G-code. 7. Recommended software: Cura, Simplify 3D pronterface, Repetier-host, Makerware. 8. Support machine structure: XYZ, Delta, Kossel, Ultimaker, Corexy
Repetier host 3d printer New
Aibecy Dual Print Head Extruder Full Kit, with 0.4mm Brass Nozzle, for 1.75mm Filament, Compatible with Ultimaker2 DIY Model 3D Printer
  • 100% brand new high quality accessories for 3D printer.
  • High-quality linear bearing, classic cross shaft slide design, smooth sliding.
  • High expansibility, can install double cooling air duct.
  • Improve thick wall PTFE parts, more reliable and durable.
  • Compatible with Ultimaker2 and cross-axis 3D printers.
Repetier host 3d printer New
Creality Ender 3 Max 3D Printer 300 x 300 x 340mm, 2020 Newest All Metal FDM 3D Printer with Larger Glass Bed Silent Mainboard All Metal Extruder Smart Sensor Dual Cooling Fans
  • 【Max workspace】 Creality Ender 3 Max offers a large build volume of 300x300x340mm allowing you to expand your creative possibilities. Even though it has the same price with ender 5, With the ender 3 max, you will have more choices because of the max workspace.
  • 【Modular hotend】The Ender 3 Max has a newly developed hot-end design and simplifies the exchange of individual components. In addition, the hotend has dual fans that allow better heat dissipation. An integrated copper nozzle enables better heat resistance and faster melting of the materials.
  • 【Proven stable structure】Even movements and stable printing are made possible thanks to the proven stable structure with a precise Z-axis leadscrew and V-slot profiles.
  • 【Intelligent functions】The Creality Ender 3 Max is equipped with a filament sensor and a resume print function. If the filament accidentally runs out or an unexpected power failure occurs, you can easily and conveniently resume printing. This saves you valuable material and time.
  • 【Carborundum Glass Platform 】This glass plate is a popular upgrade for a 3D printer because of its very good adhesion and fast heating-up speed. The smooth first layer also increases the aesthetics of your finished models. With the Ender 3 Max, you no longer have to buy this upgrade because the 3D printer already includes it.
Repetier host 3d printer New
QIDI TECH i mates 3D Printer,2021 Newest Commercial Grade FDM 3D Printer With Two Kinds of Extruders ,Printing Size 260x200x200mm
  • Excellent industrial design, high-end manufacturing, it can be used out of the box. We adhere to high-standard production, strict process requirements, full mold design of the whole 3d printer,it is safer. Both closed printing and ventilated printing can be done on this 3d printer .When printing ABS and other filament which need to be closed printing, the printing effect is better. Really out of the box, open the package, take out the complete 3d printer directly without any tedious assembly.
  • Outstanding industrial structure. QIDI Technology has always adhered to the use of high-end industrial-grade FDM structure. The printing principle is different from theDIY structure. When printing large models, it is more stable and more accurate! The print size is 260×200×200, which can basically meet the daily printing needs
  • Unique extruder and special printing platform. QIDI's newly developed extruder, with a nozzle of 0.2mm,it can print the surface of the model more delicately, with an accuracy higher than that of the 0.4mm nozzle.The i mates 3d printer will be equipped with one set of 0.4 mm extruder and one set of 0.2mm extruder.
  • Excellent user experience, friendly UI interface.It’s equipped with self-developed QIDI slicing software, two modes can be selected: normal mode and expert mode. The normal mode is suitable for novices, the parameter system has been intelligently set, no other operations are required, it is very simple. Expert mode is suitable for experienced users, who can deeply participate in modifying parameters and personalized printing models.
  • Silent printing. A break point can be saved and the printing can be continued later. If power outage is occurred during the printing process, the printer will automatically save the break point.

Where to buy?

If you are asking yourself where to buy Repetier host 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Repetier host 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Repetier host 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Repetier host 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Repetier host 3d printer used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Repetier host 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

QIDI TECH i mates 3D Printer,2021 Newest Commercial Grade FDM 3D Printer With Two Kinds of Extruders ,Printing Size 260x200x200mm
  • Excellent industrial design, high-end manufacturing, it can be used out of the box. We adhere to high-standard production, strict process requirements, full mold design of the whole 3d printer,it is safer. Both closed printing and ventilated printing can be done on this 3d printer .When printing ABS and other filament which need to be closed printing, the printing effect is better. Really out of the box, open the package, take out the complete 3d printer directly without any tedious assembly.
  • Outstanding industrial structure. QIDI Technology has always adhered to the use of high-end industrial-grade FDM structure. The printing principle is different from theDIY structure. When printing large models, it is more stable and more accurate! The print size is 260×200×200, which can basically meet the daily printing needs
  • Unique extruder and special printing platform. QIDI's newly developed extruder, with a nozzle of 0.2mm,it can print the surface of the model more delicately, with an accuracy higher than that of the 0.4mm nozzle.The i mates 3d printer will be equipped with one set of 0.4 mm extruder and one set of 0.2mm extruder.
  • Excellent user experience, friendly UI interface.It’s equipped with self-developed QIDI slicing software, two modes can be selected: normal mode and expert mode. The normal mode is suitable for novices, the parameter system has been intelligently set, no other operations are required, it is very simple. Expert mode is suitable for experienced users, who can deeply participate in modifying parameters and personalized printing models.
  • Silent printing. A break point can be saved and the printing can be continued later. If power outage is occurred during the printing process, the printer will automatically save the break point.
SODIAL 3 Pcs 3D Printing Accessories: 2 Set CR-10 Y Motor Plate Set Motor Fixing Bracket & 1 Set SKR V1.3 32-Bit DIY Controller
  • 4. Motor drive interface: XYZ, EO, E1, five channels (each channel has a re-expandable interface), up to 256 subdivisions
  • 5. Expanded interface function support: power-off continuous , material breakage detection, shutdown after playing, automatic leveling, BL Press, 3 D Press
  • 1.3D printer, SKR V1.3 control motherboard, 32-bit processor, open source firmware, strong compatibility. 2. Input voltage: DC12V-DC24V 5A-15A. 3. Drive working mode support: TMC2130 SPI, TMC2208UART
  • 3 pcs 3D Printing Accessories: 2 set CR-10 Y Motor Plate Set & 1 set SKR V1.3 32-Bit DIY Controller
  • 6. Support file format: G-code. 7. Recommended software: Cura, Simplify 3D pronterface, Repetier-host, Makerware. 8. Support machine structure: XYZ, Delta, Kossel, Ultimaker, Corexy
with Wear‑resistant Extruder Nozzle 4Pcs 3D Printer Nozzles Set For Cr‑10 All Metal Thermal Kit for 3D Printer
  • The product is very suitable for high temperature 3D printing that other nozzles cannot handle
  • This Ti nozzle can be used for CR‑10 all metal thermal kit and other MK8 MK9 extruder and 3D printer
  • This nozzle is made of high quality Ti alloy material, come with high temperature flexibility
  • For MK8 nozzle is durable, non‑stick, have strong corrosion‑resistant and wear‑resistant
  • Inner surface is very glossy(not cheap nozzles on the market), so you can print without worrying about jams
Printers Accessory, Aluminum 3D Printers Accessory, Durable Easy Installation Reliable for Hot End Extruder
  • The new MDD V1.2 is the simplest direct drive conversion available for Creality Ender‑3, for CR‑10 3D printers.
  • Simplest direct‑drive system for Creality 3D printers. Practical accessory.
  • Lighter than most direct drives, installation takes about 20‑30 minutes ‑ no firmware changes, no volume loss, no cutting or splicing.
  • There is no need to change the firmware when using extruder and hot ends, although we recommend starting with configuration file retracting 1.0mm and turning off the softening control (sliding, wiping, etc.).
  • MDD is compatible with many extruder and is designed to turn your inventory components into powerful direct‑drive systems without the need for other hardware.

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Repetier host 3d printer.

Rating: 3.19 of 5 - 27 votes
1 Star2 Stars3 Stars4 Stars5 Stars (27 votes, average: 3.19 out of 5)
Loading...