Raspberry pi 3d printer shield Reviews and Best Deals

Find online Product Reviews, Ranks and Prices for Raspberry pi 3d printer shield. Shop Raspberry pi 3d printer shield directly from the 2021 Top Online Stores like Amazon, eBay and Aliexpress. Don't miss out on the top promotions for Raspberry pi 3d printer shield, buy Raspberry pi 3d printer shield directly online and enjoy big saving on your purchases.

Latest Raspberry pi 3d printer shield
Auoeer NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch for Raspberry Pi 3B and NanoDLP's Light-Cured 3D Printers Module Board
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • We are a professional Amazon store. If you have any questions, you can contact us at any time. We sincerely create a good buying experience for every customer who comes to each store.
Latest Raspberry pi 3d printer shield
YUQIYU NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • If there is a quality problem, please contact us by email, and we will definitely give you a satisfactory answer.
Latest Raspberry pi 3d printer shield
Auoeer NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers Driver Modules Driver board
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • Shutter support
  • We are a professional Amazon store. If you have any questions, you can contact us at any time. We sincerely create a good buying experience for every customer who comes to each store.
Latest Raspberry pi 3d printer shield
Hemobllo 9-28V NanoDLP Shield V1.1 Expansion Board for Raspberry Pi 3B Light-cured 3D Printer
  • 9-28V NanoDLP Shield V1.1 Expansion Board for Raspberry Pi 3B Light-cured 3D Printer
  • With 12C port for connecting 12C 1602 LCD.
  • It is designed for the Raspberry Pi 3B and is used to run NanoDLPs light-cured 3D printers.
  • Provides a maximum of 3A and other interfaces required by NanoDLP.
  • Size: 6 x 4 x 2cm
Latest Raspberry pi 3d printer shield
Latest Raspberry pi 3d printer shield
3D Printer Accessory NanoDLP Shield V1.1 Expansion Board for Raspberry Pi 3B
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers.
  • The board contains a 9-28V to 5V circuit, providing up to 3A of current, as well as the required NanoDLP 9V-28V to [email protected] Buck Converter, DRV8825 Stepper Driver, 12V Fans (cooling the Raspberry Pi).
  • Controled MOS for ext LED driver.
  • I2C Connector for LCD1602.
  • Uart Connector for Touch Screen.
Latest Raspberry pi 3d printer shield
KANJJ-YU part NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers 3D
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • Dear Friends, Welcome to our store , top seller store, surprise never stop! If you are not satisfied meet in any regards, please have no hesitation to contact us ,we will resolve all problems for you.
Latest Raspberry pi 3d printer shield
LONGWDS Module NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • If you have any questions, please feel free to contact us. We always offer professional and prompt responses. Thank you!
Latest Raspberry pi 3d printer shield
BJLWTQ NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers Driver Modules
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • Shutter support
  • Your satisfaction is our top priority. We will do everything we can to meet your requirements. If you have any questions, please feel free to contact us.
Latest Raspberry pi 3d printer shield
LHQ-HQ NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers Driver Modules
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • Shutter support
  • The products in our shop will be carefully selected before shipment, and then shipped to you. If you have any questions, please contact us at any time, we will usually reply to any message within 3 hours, no more than 8 hours. Our current delivery time will be about 10 days earlier than Amazon, please rest assured single..

Overview


Reviews 2021

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Raspberry pi 3d printer shield. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Raspberry pi 3d printer shield give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

Best
Hemobllo 9-28V NanoDLP Shield V1.1 Expansion Board for Raspberry Pi 3B Light-cured 3D Printer
  • 9-28V NanoDLP Shield V1.1 Expansion Board for Raspberry Pi 3B Light-cured 3D Printer
  • With 12C port for connecting 12C 1602 LCD.
  • It is designed for the Raspberry Pi 3B and is used to run NanoDLPs light-cured 3D printers.
  • Provides a maximum of 3A and other interfaces required by NanoDLP.
  • Size: 6 x 4 x 2cm
Best
3D Printer Accessory NanoDLP Shield V1.1 Expansion Board for Raspberry Pi 3B
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers.
  • The board contains a 9-28V to 5V circuit, providing up to 3A of current, as well as the required NanoDLP 9V-28V to [email protected] Buck Converter, DRV8825 Stepper Driver, 12V Fans (cooling the Raspberry Pi).
  • Controled MOS for ext LED driver.
  • I2C Connector for LCD1602.
  • Uart Connector for Touch Screen.
Best
HUANRUOBAIHUO 16 Channel 12-bit PWM/Servo Driver-I2C interface PCA9685 module for arduino Robot Raspberry pi shield module servo shield 3D Printer Parts
  • Compatible With: For Arduino
  • Accessory Type: Extension Board
  • Model Number: 16 Channel 12-bit PWM/Servo Driver-I2C interface PCA9685 module
Best
Auoeer NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch for Raspberry Pi 3B and NanoDLP's Light-Cured 3D Printers Module Board
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • We are a professional Amazon store. If you have any questions, you can contact us at any time. We sincerely create a good buying experience for every customer who comes to each store.
Best
3D Printer Accessory NanoDLP Shield V1.1 Expansion Board for Raspberry Pi 3B
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers.
  • The board contains a 9-28V to 5V circuit, providing up to 3A of current, as well as the required NanoDLP 9V-28V to [email protected] Buck Converter, DRV8825 Stepper Driver, 12V Fans (cooling the Raspberry Pi).
  • Controled MOS for ext LED driver.
  • I2C Connector for LCD1602.
  • Uart Connector for Touch Screen.

On this product review you can find the list of the best Raspberry pi 3d printer shield including the technical product sheet, reviews issued by real buyes who have already purchased the products. You can also find info on the prices, active promotions and deals in the United Kingdom (UK).

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Raspberry pi 3d printer shield

Here is the ranking of the best Raspberry pi 3d printer shield, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Raspberry pi 3d printer shield and read the reviews left by real customers, see the Raspberry pi 3d printer shield ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Raspberry pi 3d printer shield New
ELEGOO 3 x 400 Pin Breadboard 4 Power Rails for Arduino Jumper Cable
  • 400 breadboards with 2 positive and negative power lines at both ends.
  • Clean workmanship, flat and straight (and no warped edges) and clean print. (PP material)
  • Great 3 x 400 pin breadboards for craft prototyping (self-adhesive to your Arduino prototype shield)
  • With tight plug-in contacts, the components will sit well after successful installation and nothing wobbles.
  • These 3 breadboards come individually nicely packaged in a box.
Raspberry pi 3d printer shield New
16 Channel 12-bit PWM/Servo Driver-I2C Interface PCA9685 Module for arduino Robot Raspberry pi Shield Module servo Shield 3D Printing Accessories
  • Make sure this fitsby entering your model number.
  • Compatible With: For Arduino
  • Accessory Type: Extension Board
  • Model Number: 16 Channel 12-bit PWM/Servo Driver-I2C interface PCA9685 module
  • 100% brand new and high quality. Useful 3D printer accessory for 3D printing
Raspberry pi 3d printer shield New
ELEGOO 3 MB-102 Breadboard 830 Pin Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connection Blocks
  • Well made breadboards with 830 tie points, plenty of space for components and makes crafts or Develop fun.
  • √ Double-sided longitudinal rails for power supply, compatible with the external power module for arduino.
  • Jumper cables can be easily inserted and hold without losing contact.
  • √ The breadboards can be stuck together on the long sides and on the bottom there is an adhesive surface to attach the boards to a base.
  • √ Each single breadboard is expandable, has the usual self-adhesive film on the back. The whole thing packed in a mini box and also 3 times as a pack.
Raspberry pi 3d printer shield New
For 3D Printer NanoDLP Shield V1.1 Expansion Board +Boost LED Driver Board + 2Pcs CR-10 Limit Switch for SLA UV Cured 3D Printer Parts Cables for 3D Printer
  • Model Number: NanoDLP Shield V1.1 Expansion Board
  • Wide 5V to 32V Input Voltage Range Maximum Boost Output Up to 60V 0.22V FB adjustable LED drive current Max. 5A Switching Current Capability Up to 93% efficiency Excellent line and load regulation Thermal Shutdown Function Built in Current Limit Function.
  • Item Type: Motherboard
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP. See the instructions below.
Raspberry pi 3d printer shield New
MUKUAI56 6-Channel Raspberry Pi Relay Shield Module Extension Board For Raspberry Pi A+/B+/2 B/3B Relay DIY
  • They are good components for you diy.
  • RPi Relay Boards Enable Pi to Control High-Voltage and High-Current Devices and Make Common Domestic Appliances Smarter.
  • Supports Raspberry Pi A + / B + / 2B / 3B. High quality relay, loads up to 250VAC / 5A, 30VDC / 5A.
  • Onboard LEDs for indicating relay status. Photo link isolation, prevent interference from high voltage circuit.
  • Theory:Voltage Relay
Raspberry pi 3d printer shield New
XIAOMINDIAN 3D Printer Parts Nanno DLP Shield V1.1 Expansion Board With DRV8825 MOS Controlled For Raspberry Pi 3B E NanoDLP Light-cured Printer Parts
  • 9V-28V to [email protected] Buck Converter
  • DRV8825 Stepper Driver
  • 12V Fans (cooling the Pi)
  • 2X Endstops
  • Controled MOS for ext LED driver
Raspberry pi 3d printer shield New
Neigei For TL-Smoother1pc NanoDLP Shield V1.1 Expansion Board With DRV8825 Controlled MOS For Raspberry Pi 3B And Light-Cured 3D Printers (Color : Green) (Color : Green)
  • The Board Contains A 9-28V To 5V Circuit That Provides A Maximum Of 3A And Other Interfaces Required By Nanodlp.
  • Model Number: Nanodlp Shield V1.1 Expansion Board
  • This Expansion Board Is Designed For The Raspberry Pi 3B And Is Used To Run Nanodlp'S Light-Cured 3D Printers.
  • Package Contents:1*Nanodlp Shield V1.1 Expansion Board
  • Item Type: Motherboard
Raspberry pi 3d printer shield New
FYYONG NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • FYYONG: We listen to customer feedback and fine-tune every detail to ensure quality and provide the best service.
Raspberry pi 3d printer shield New
ZJN-JN NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers printer accessories PC Accessories
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • Please feel free to contact us with any questions you may have.We'll get back to you as soon as we can.

Prices

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Raspberry pi 3d printer shield actually costs.

Latest Raspberry pi 3d printer shield
Auoeer NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch for Raspberry Pi 3B and NanoDLP's Light-Cured 3D Printers Module Board
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • We are a professional Amazon store. If you have any questions, you can contact us at any time. We sincerely create a good buying experience for every customer who comes to each store.
Latest Raspberry pi 3d printer shield
YUQIYU NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • If there is a quality problem, please contact us by email, and we will definitely give you a satisfactory answer.
Latest Raspberry pi 3d printer shield
Auoeer NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers Driver Modules Driver board
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • Shutter support
  • We are a professional Amazon store. If you have any questions, you can contact us at any time. We sincerely create a good buying experience for every customer who comes to each store.
Latest Raspberry pi 3d printer shield
Hemobllo 9-28V NanoDLP Shield V1.1 Expansion Board for Raspberry Pi 3B Light-cured 3D Printer
  • 9-28V NanoDLP Shield V1.1 Expansion Board for Raspberry Pi 3B Light-cured 3D Printer
  • With 12C port for connecting 12C 1602 LCD.
  • It is designed for the Raspberry Pi 3B and is used to run NanoDLPs light-cured 3D printers.
  • Provides a maximum of 3A and other interfaces required by NanoDLP.
  • Size: 6 x 4 x 2cm
Latest Raspberry pi 3d printer shield
Latest Raspberry pi 3d printer shield
3D Printer Accessory NanoDLP Shield V1.1 Expansion Board for Raspberry Pi 3B
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers.
  • The board contains a 9-28V to 5V circuit, providing up to 3A of current, as well as the required NanoDLP 9V-28V to [email protected] Buck Converter, DRV8825 Stepper Driver, 12V Fans (cooling the Raspberry Pi).
  • Controled MOS for ext LED driver.
  • I2C Connector for LCD1602.
  • Uart Connector for Touch Screen.
Latest Raspberry pi 3d printer shield
KANJJ-YU part NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers 3D
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • Dear Friends, Welcome to our store , top seller store, surprise never stop! If you are not satisfied meet in any regards, please have no hesitation to contact us ,we will resolve all problems for you.
Latest Raspberry pi 3d printer shield
LONGWDS Module NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • If you have any questions, please feel free to contact us. We always offer professional and prompt responses. Thank you!
Latest Raspberry pi 3d printer shield
BJLWTQ NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers Driver Modules
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • Shutter support
  • Your satisfaction is our top priority. We will do everything we can to meet your requirements. If you have any questions, please feel free to contact us.
Latest Raspberry pi 3d printer shield
LHQ-HQ NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers Driver Modules
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • Shutter support
  • The products in our shop will be carefully selected before shipment, and then shipped to you. If you have any questions, please contact us at any time, we will usually reply to any message within 3 hours, no more than 8 hours. Our current delivery time will be about 10 days earlier than Amazon, please rest assured single..

Promotions and Deals (UK) 2021

During the year there are many promotions on products for sale online and Raspberry pi 3d printer shield could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Raspberry pi 3d printer shield which are among the cheapest on the market. Just scroll through the list to find Raspberry pi 3d printer shield the cheapest products.

2021 Catalog

The product Raspberry pi 3d printer shield can be found in the dedicated catalog where the entire list of products on sale is presented. Raspberry pi 3d printer shield is included in the 2021 catalog presentation along with the family of products belonging to the Brand. The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Raspberry pi 3d printer shield New
ELEGOO 3 x 400 Pin Breadboard 4 Power Rails for Arduino Jumper Cable
  • 400 breadboards with 2 positive and negative power lines at both ends.
  • Clean workmanship, flat and straight (and no warped edges) and clean print. (PP material)
  • Great 3 x 400 pin breadboards for craft prototyping (self-adhesive to your Arduino prototype shield)
  • With tight plug-in contacts, the components will sit well after successful installation and nothing wobbles.
  • These 3 breadboards come individually nicely packaged in a box.
Raspberry pi 3d printer shield New
16 Channel 12-bit PWM/Servo Driver-I2C Interface PCA9685 Module for arduino Robot Raspberry pi Shield Module servo Shield 3D Printing Accessories
  • Make sure this fitsby entering your model number.
  • Compatible With: For Arduino
  • Accessory Type: Extension Board
  • Model Number: 16 Channel 12-bit PWM/Servo Driver-I2C interface PCA9685 module
  • 100% brand new and high quality. Useful 3D printer accessory for 3D printing
Raspberry pi 3d printer shield New
ELEGOO 3 MB-102 Breadboard 830 Pin Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connection Blocks
  • Well made breadboards with 830 tie points, plenty of space for components and makes crafts or Develop fun.
  • √ Double-sided longitudinal rails for power supply, compatible with the external power module for arduino.
  • Jumper cables can be easily inserted and hold without losing contact.
  • √ The breadboards can be stuck together on the long sides and on the bottom there is an adhesive surface to attach the boards to a base.
  • √ Each single breadboard is expandable, has the usual self-adhesive film on the back. The whole thing packed in a mini box and also 3 times as a pack.
Raspberry pi 3d printer shield New
For 3D Printer NanoDLP Shield V1.1 Expansion Board +Boost LED Driver Board + 2Pcs CR-10 Limit Switch for SLA UV Cured 3D Printer Parts Cables for 3D Printer
  • Model Number: NanoDLP Shield V1.1 Expansion Board
  • Wide 5V to 32V Input Voltage Range Maximum Boost Output Up to 60V 0.22V FB adjustable LED drive current Max. 5A Switching Current Capability Up to 93% efficiency Excellent line and load regulation Thermal Shutdown Function Built in Current Limit Function.
  • Item Type: Motherboard
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP. See the instructions below.
Raspberry pi 3d printer shield New
MUKUAI56 6-Channel Raspberry Pi Relay Shield Module Extension Board For Raspberry Pi A+/B+/2 B/3B Relay DIY
  • They are good components for you diy.
  • RPi Relay Boards Enable Pi to Control High-Voltage and High-Current Devices and Make Common Domestic Appliances Smarter.
  • Supports Raspberry Pi A + / B + / 2B / 3B. High quality relay, loads up to 250VAC / 5A, 30VDC / 5A.
  • Onboard LEDs for indicating relay status. Photo link isolation, prevent interference from high voltage circuit.
  • Theory:Voltage Relay
Raspberry pi 3d printer shield New
XIAOMINDIAN 3D Printer Parts Nanno DLP Shield V1.1 Expansion Board With DRV8825 MOS Controlled For Raspberry Pi 3B E NanoDLP Light-cured Printer Parts
  • 9V-28V to [email protected] Buck Converter
  • DRV8825 Stepper Driver
  • 12V Fans (cooling the Pi)
  • 2X Endstops
  • Controled MOS for ext LED driver
Raspberry pi 3d printer shield New
Neigei For TL-Smoother1pc NanoDLP Shield V1.1 Expansion Board With DRV8825 Controlled MOS For Raspberry Pi 3B And Light-Cured 3D Printers (Color : Green) (Color : Green)
  • The Board Contains A 9-28V To 5V Circuit That Provides A Maximum Of 3A And Other Interfaces Required By Nanodlp.
  • Model Number: Nanodlp Shield V1.1 Expansion Board
  • This Expansion Board Is Designed For The Raspberry Pi 3B And Is Used To Run Nanodlp'S Light-Cured 3D Printers.
  • Package Contents:1*Nanodlp Shield V1.1 Expansion Board
  • Item Type: Motherboard
Raspberry pi 3d printer shield New
FYYONG NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • FYYONG: We listen to customer feedback and fine-tune every detail to ensure quality and provide the best service.
Raspberry pi 3d printer shield New
ZJN-JN NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers printer accessories PC Accessories
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • Please feel free to contact us with any questions you may have.We'll get back to you as soon as we can.

Where to buy?

If you are asking yourself where to buy Raspberry pi 3d printer shield? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Raspberry pi 3d printer shield, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Stores In a physical store instead you can try the product with your own hands, you can directly see Raspberry pi 3d printer shield and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Raspberry pi 3d printer shield may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Raspberry pi 3d printer shield used.

Promo Codes 2021

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Raspberry pi 3d printer shield at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

XIAOMINDIAN 3D Printer Parts Nanno DLP Shield V1.1 Expansion Board With DRV8825 MOS Controlled For Raspberry Pi 3B E NanoDLP Light-cured Printer Parts
  • 9V-28V to [email protected] Buck Converter
  • DRV8825 Stepper Driver
  • 12V Fans (cooling the Pi)
  • 2X Endstops
  • Controled MOS for ext LED driver
ELEGOO 3 MB-102 Breadboard 830 Pin Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connection Blocks
  • Well made breadboards with 830 tie points, plenty of space for components and makes crafts or Develop fun.
  • √ Double-sided longitudinal rails for power supply, compatible with the external power module for arduino.
  • Jumper cables can be easily inserted and hold without losing contact.
  • √ The breadboards can be stuck together on the long sides and on the bottom there is an adhesive surface to attach the boards to a base.
  • √ Each single breadboard is expandable, has the usual self-adhesive film on the back. The whole thing packed in a mini box and also 3 times as a pack.
ELEGOO 3 x 400 Pin Breadboard 4 Power Rails for Arduino Jumper Cable
  • 400 breadboards with 2 positive and negative power lines at both ends.
  • Clean workmanship, flat and straight (and no warped edges) and clean print. (PP material)
  • Great 3 x 400 pin breadboards for craft prototyping (self-adhesive to your Arduino prototype shield)
  • With tight plug-in contacts, the components will sit well after successful installation and nothing wobbles.
  • These 3 breadboards come individually nicely packaged in a box.
MUKUAI56 6-Channel Raspberry Pi Relay Shield Module Extension Board For Raspberry Pi A+/B+/2 B/3B Relay DIY
  • They are good components for you diy.
  • RPi Relay Boards Enable Pi to Control High-Voltage and High-Current Devices and Make Common Domestic Appliances Smarter.
  • Supports Raspberry Pi A + / B + / 2B / 3B. High quality relay, loads up to 250VAC / 5A, 30VDC / 5A.
  • Onboard LEDs for indicating relay status. Photo link isolation, prevent interference from high voltage circuit.
  • Theory:Voltage Relay
FYYONG NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • FYYONG: We listen to customer feedback and fine-tune every detail to ensure quality and provide the best service.
Neigei For TL-Smoother1pc NanoDLP Shield V1.1 Expansion Board With DRV8825 Controlled MOS For Raspberry Pi 3B And Light-Cured 3D Printers (Color : Green) (Color : Green)
  • The Board Contains A 9-28V To 5V Circuit That Provides A Maximum Of 3A And Other Interfaces Required By Nanodlp.
  • Model Number: Nanodlp Shield V1.1 Expansion Board
  • This Expansion Board Is Designed For The Raspberry Pi 3B And Is Used To Run Nanodlp'S Light-Cured 3D Printers.
  • Package Contents:1*Nanodlp Shield V1.1 Expansion Board
  • Item Type: Motherboard
ZJN-JN NanoDLP Shield Expansion Board V1.1With DRV8825 Controled MOS + 2PCS Limit Switch For Raspberry Pi 3B And NanoDLP's Light-cured 3D Printers printer accessories PC Accessories
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • This expansion board is designed for the Raspberry Pi 3B and is used to run NanoDLP's light-cured 3D printers. The board contains a 9-28V to 5V circuit that provides a maximum of 3A and other interfaces required by NanoDLP.
  • I2C Connector for LCD1602
  • Uart Connector for Touch Screen
  • Please feel free to contact us with any questions you may have.We'll get back to you as soon as we can.

Others Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Raspberry pi 3d printer shield.

Rating: 3.5 of 5 - 32 votes
1 Star2 Stars3 Stars4 Stars5 Stars (32 votes, average: 3.50 out of 5)
Loading...