Raspberry pi 3d printer controller Reviews and Best Deals

Find online Product Reviews, Ranks and Prices for Raspberry pi 3d printer controller. Shop Raspberry pi 3d printer controller directly from the 2021 Top Online Stores like Amazon, eBay and Aliexpress. Don't miss out on the top promotions for Raspberry pi 3d printer controller, buy Raspberry pi 3d printer controller directly online and enjoy big saving on your purchases.

DISCOUNTLatest Raspberry pi 3d printer controller
KeeYees L298N Motor Drive Controller Board Stepper Motor Control Module Dual H-Bridge with DC Motor and Smart Car Wheel Compatible with Arduino
  • This is a good parts kit for an Arduino and raspberry pi based RC car project. It not only comes with 4pcs wheels and motors, but also 2pcs motor drive modules and 60pcs jumper wires, which are very useful accessories for your project.
  • Motor Drive Controller: L298N used as the main driver chip. It has the strong driving ability, low calorific value and strong anti-interference ability.
  • TT Motor: The motor is a two-axis motor with a reduction ratio of 1:48, which has strong anti-interference ability.
  • Smart Car Wheels: The wheels are made of high-strength plastic and the tires are made of durable black rubber.
  • To avoid damage the voltage stabilizing chip of Motor Drive Module, please use an external 5V logic supply when using more than 12V driving voltage.
Latest Raspberry pi 3d printer controller
NorthPada Raspberry Pi 3 Model B B+ A+ Plus Raspberry Pico Power Supply Cord 5V 3A PSU Micro USB 5 Feet with Power On/Off Switch, with a USB C Adapter for Raspberry Pi 4 Model B, Pi 400
  • A product of NorthPada; Input: AC 100-240V 0.3A 50/60Hz, Output: DC 5V 3000mA/3A
  • Cable Length: 150cm/5Feet with On/Off Power Switch, Inline Noise Filter
  • For Raspberry Pi 3 Model B B+ A+, Raspberry Pi 2 Model B, Raspberry Pi A/A+/B/B+, Raspberry Pi Zero, Raspberry Pi Pico, ASUS Tinker Board/S and other devices with Micro USB
  • Come with a micro USB to USB C Adapter, it can also support Raspberry Pi 4 Model B, Raspberry Pi 400
  • Package included: 1 x 5V power supply with micro usb, 1 x micro USB to USB C Adapter; Warranty: Money back within 90 Days and Replacement within 2 Years
Latest Raspberry pi 3d printer controller
U:Create Raspberry Pi 3 Model B+ Desktop Starter Kit (16Gb, Black)
  • The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT. The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market
  • 16GB MicroSD card preloaded with the latest version (V2) of NOOBS, including Raspbian, the official OS of the Raspberry Pi Foundation
  • Official Black Raspberry Pi 3 HAT compatible Case - Easy snap fit assembly
  • Official Black Raspberry Pi 5.1V 2.5A Power Supply (UK, EU)
Latest Raspberry pi 3d printer controller
GeeekPi 2PCS/Lot USB Controller Game Pad Joypad Joystick for PC Raspberry Pi 3 Model B Retropie
  • Compatible OS: WINDOWS98/2000/ME/XP Mac os .xv10.2.8
  • Fully tested to work with the Raspberry Pi 3 Model B and Retropie
  • Plug and Play. No extra drivers needed!
  • 3rd Party, Not original
  • Package Includes: 2 x USB Controller GAME PAD For PC Raspberry Pi 3 Retropie,1x Flannel Bag
DISCOUNTLatest Raspberry pi 3d printer controller
TP-Link AC600 USB Wi-Fi Dongle, Dual Band 5 GHz Wireless Adapter for PC, Desktop and Laptop, Supports Windows 10/8.1/8/7/XP, Mac OS 10.9-10.13 (Archer T2U Nano)
  • High speed Wi-Fi dongle - up to 600Mbps speeds with 200Mbps on 2.4GHz and 433 Mbps on 5GHz, upgrades your devices to higher AC Wi-Fi speeds
  • Dual band wireless adapter - 2.4GHz and 5GHz band for flexible connectivity, upgrades your devices to work with the latest dual-band Wi-Fi router for faster speed and extended range
  • Nano design USB Wi-Fi - Small, unobtrusive design allows you to plug it in and forget it is even there
  • Operating System – Supports Windows 10/8.1/8/7/XP, Mac OS 10.910.13
  • Advanced security –supports 64/128-bit WEP, WPA/WPA2, and WPA-PSK/WPA2-PSK encryption standards
Latest Raspberry pi 3d printer controller
BrosTrend 1200Mbps Linux USB WiFi Dongle for PC of Ubuntu, Mint, Debian, Kali, Kubuntu, Lubuntu, Xubuntu, Zorin, Raspberry Pi OS, Windows 10-XP, 5GHz / 867Mbps + 2.4GHz / 300Mbps (AC1L)
  • MULTI-OS SUPPORTED: Compatible with Linux Kernels up to 5.11, Ubuntu 21.04 ~ 16.04, Debian 10/9/8, Linux Mint 20/19/18, LMDE 4/3/2/1, Kali Linux, Raspberry Pi OS (Raspbian) 10/9/8, MATE, GNOME, Kubuntu, Lubuntu, Xubuntu, Ubuntu Studio, Budgie, Kylin, MX Linux, Pop! OS, Elementary OS, Zorin OS, KDE neon, antiX Linux, Q4OS, Parrot OS, PureOS, Bodhi, deepin, Linux Lite, SparkyLinux, Peppermint OS, Devuan; Windows 10/8.1/8/7/XP; MAC OS X 10.9-10.14
  • LINUX TECHNICAL SUPPORT TICKET INCLUDED: Please Send Email at [email protected] for Expertise Linux Wifi Adapter Technical Support, Please Tell Us Your Order Number and OS Type in the Email
  • FAST WI-FI SPEED: Linux 5GHz USB WIFI Dongle supplies 867Mbps Wi-Fi Speed on 5GHz Band or 300Mbps Speed on 2.4GHz Band, Best choice for Online 4K Video Streaming, Gaming, High Quality Music and Youtube by Using this AC1200 Dual Band Ubuntu USB Wifi Adapter; It can Works 4 Times Faster than 802.11b/g/n USB Wireless Adapter
  • USB 3.0 PORT SUPER SPEED WITH GOLD PLATED: Brings 10 Times Faster and More Solid Wireless Internet Connection; Also Backward Compatible with USB 2.0 Port; Your good choice of Ubuntu USB WIFI Dongle
  • WIFI CONNECTION SECURITY ENCRYPTION: This USB WIFI Dongle supports WPA2 (TKIP+AES), WPA, WEP, to Protect your Wifi Network Security
  • ADVANCED WPA3 SECURITY: Secure Your Devices and Network Privacy by Supporting the Latest Wireless Encryption: WPA3-SAE, WPA2/WPA/WEP, AES/PSK/TKIP, 802.1x
Latest Raspberry pi 3d printer controller
Raspberry Pi 3 Model A+, Cortex to 1.4GHZ, WiFi 5GHZ Motherboard (11811853)
  • Motherboard PI 3 Model A+
  • High quality
  • WiFi 5GHZ
  • Model number: 1811853
Latest Raspberry pi 3d printer controller
GeeekPi 2PCS Raspberry Pi 4 Fan DC 5V Brushless CPU RGB Cooling Fan 40x40x10mm, for Raspberry Pi 4 Model B,3B+,Raspberry Pi 3/2 Model B (Multi-coloured)
  • Used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+ or other development board
  • The DC 5V cooling fan run smoothly and quietly and it's good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
  • Fan Size: 40x40x10mm
  • Package Includes: 2x Cooling Fan, 2x Screw Set.4 Pack Version,please refer to Asin: B084RKPK23
  • NOTE: Raspberry Pi Not Included
Latest Raspberry pi 3d printer controller
GeeekPi Raspberry Pi 4 Extreme Cooling Fan Kit, Aluminum Heatsink with Cooling Fan for Raspberry Pi 4B & Raspberry Pi 3 B+(B PLUS) & Raspberry Pi 3B
  • It's fit for Raspberry Pi 4B and Raspberry Pi 3B+/3B; It's compatible with most of cases in the market;
  • Use CNC Machining manufacturing technology for Aluminum heatsink; With 2pcs little thermal tapes to attach to the CPU and LAN tightly for better dissipation;
  • The cooling fan updated to 3510 version and it will be more quiet and powerful for heat dissipation of Raspberry Pi Board;
  • Raspberry Pi Board Not Included!
  • Package Includes: 1x Cooling Kit( Aluminum Heatsink with Cooling Fan), 1x Think Copper Heatsink For Pi 3B+/3B, 2x Thermal Tapes for Pi 3B+/3B,2x Thermal Tapes for Pi 4B
DISCOUNTLatest Raspberry pi 3d printer controller
ELEGOO Relay Module 4 Channel DC 5V with Optocoupler for Arduino UNO R3 MEGA Project 1280 DSP ARM PIC AVR STM32 Raspberry Pi
  • This relay module is 5V active low. Relay output maximum contact is AC250V 10A and DC30V 10A.
  • Standard interface can be directly connected with microcontrollers. This kit is compatible with Arduino IDE, Raspberry Pi and STM32
  • Working status indicator lights are conducive for the safety use
  • 4-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other equipments with large current.
  • Widely used for all MCU control, industrial sector, PLC control, smart home control.

Overview


Reviews 2021

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Raspberry pi 3d printer controller. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Raspberry pi 3d printer controller give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

DISCOUNTBest
Raspberry Pi 3 Model B+
  • The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products
  • The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range
  • The Raspberry Pi 3 Model B+ maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B.
  • CSI camera port for connecting a Raspberry Pi camera. DSI display port for connecting a Raspberry Pi touchscreen display
Best
VSDISPLAY 13.3inch 13.3" N133HSE 1920x1080 FHD IPS LCD Screen and Type C USB C HDMI LCD Controller Driver Board 30Pin EDP,for Smart Mirror/3D Printer Project/Raspberry PI/Gaming Monitor Displaying
  • 【Screen Advantage】13.3 inch Transmissive USB C IPS LCD monitor display screen , 1920x1080 resolution ,350 cd/m2 high brightness, Contrast Ratio 700:1,Viewing Angle 89/89/89/89 ,Outline Size 303.35(W)×192.82(H) ×3(D) mm,Display Area 293.76(W)×165.24(H) mm.Signal Interface eDP (2 Lanes) , Connector , 30 pins , WLED Backlight.
  • 【LCD Controller Board 】 Video input: HDMI Type C ,Output: eDP USB (max 500mA) ,The function for this board is to light up the screen. Please use in insulated environment.
  • 【Plug and play】 No need driver installation whenever work with Raspberry Pi or Windows PC.Connecting cables and ports as picture ,power on ,LED light become green ,then connect signal cable ,the screen will be lit up .
  • 【Applications】 This screen and board can widely used to work for Smart Mirror/3D Printer Project/Raspberry PI/Gaming Monitor Displaying,etc.
  • 【Packing lists】1× HD-MI TYPE-C LCD Controller Board VS-RTD2556HC-V2,1× 13.3inch EDP 1920X1080 IPS LCD Screen ,1× Signal Cable,1× Keyboard With Cable
Best
LANMU Micro SD to Micro SD Card Extension Cable Memory Card Adapter Extension for Mini 3D Printer/Anet A8 / Car GPS Compatible with Raspberry Pi, Sandisk(48CM/1.57FT)
  • Helpful extension:This Micro SD to Micro SD Cable helps you to expand the micro SD slot on your 3D printer or other device, and to save a slot for embedded projects conveniently, you save a lot of time to upgrade.
  • Solid cable: The Micro SD Card Extender can be used in many types of state, long length and does not affect the read-write speed
  • Compatibility - for SanDisk microSDHC / SanDisk SDXC / Raspberry Pi / Arduino / GPS / DVD / DVR / LED / LCD screen or Smartphone etc.
  • 3 kinds of adapter cable to choose from [SD to SD card(Asin: B07H2RQFNN )/Micro SD to Micro SD card(Asin: B07ZPP372J) /Micro SD to SD(B07TMZ25LY)], meet your needs
  • Attentive service -If you have any questions,please feel free to contact us and we will provide you with a satisfactory solution.
Best
Jopto 2004 LCD Graphic Smart Display Screen Controller Module with Adapter and Cable Compatible Compatible with 3D Printer Controller RAMPS 1.4 Arduino Mega Arduino RepRap Pololu Shield
  • 1 Piece RepRap 3D Printer LCD Controller and SD Card Reader, included adapter for RAMPS 1.4 board, suitable for 3D printers, copiers, fax machines, laser printers, industrial test equipment, networking equipment etc.
  • Graphic Smart Controller, rotary encoder and a 20 Character x 4 Line LCD display. You can easy connect it to your RAMPS 1.4 board.
  • After connecting this panel to your RAMPS you don't need connect your PC to control your 3D Printer, powered by SD card intelligent controller.
  • The smart controller by the encoder creates all other operations, such as calibration or axis movement etc.
  • The 3D design is saved by G-code design on the SD card without printing by computer.
Best
NorthPada Raspberry Pi 3 Model B B+ A+ Plus Raspberry Pico Power Supply Cord 5V 3A PSU Micro USB 5 Feet with Power On/Off Switch, with a USB C Adapter for Raspberry Pi 4 Model B, Pi 400
  • A product of NorthPada; Input: AC 100-240V 0.3A 50/60Hz, Output: DC 5V 3000mA/3A
  • Cable Length: 150cm/5Feet with On/Off Power Switch, Inline Noise Filter
  • For Raspberry Pi 3 Model B B+ A+, Raspberry Pi 2 Model B, Raspberry Pi A/A+/B/B+, Raspberry Pi Zero, Raspberry Pi Pico, ASUS Tinker Board/S and other devices with Micro USB
  • Come with a micro USB to USB C Adapter, it can also support Raspberry Pi 4 Model B, Raspberry Pi 400
  • Package included: 1 x 5V power supply with micro usb, 1 x micro USB to USB C Adapter; Warranty: Money back within 90 Days and Replacement within 2 Years

On this product review you can find the list of the best Raspberry pi 3d printer controller including the technical product sheet, reviews issued by real buyes who have already purchased the products. You can also find info on the prices, active promotions and deals in the United Kingdom (UK).

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Raspberry pi 3d printer controller

Here is the ranking of the best Raspberry pi 3d printer controller, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Raspberry pi 3d printer controller and read the reviews left by real customers, see the Raspberry pi 3d printer controller ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Raspberry pi 3d printer controller New
MUKUAI56 Raspberry Pi 3 Model B+(Plus)/3B Msata Ssd Storage Expansion Board X850 V3.0 USB 3.0 Expansion Board Module for Raspberry Pi Computer DIY
  • They are good components for you diy.
  • Specially-made USB jumper to connect with Raspberry Pi-no additional cables needed
  • Quick file transfer with high-speed USB 3.0 connectivity from a PC or a ,USB bus-powered,LED blue indicator indicates drive status
  • Supports up to 1TB mSATA solid-state drive (SSD),Supports USB booting from your SSD,Perfect storage solution for Raspberry Pi
  • USB 3.1 Gen1 to SATA 6Gb/s bridge controller,USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
Raspberry pi 3d printer controller New
YASEKING Raspberry Pi X850 Msata Ssd Disk Expansion Board Supports 1Tb Usb 3.0
  • X850 mSATA SSD Hard Disk Storage Expansion Board for Raspberry Pi Support USB 3.0
  • Type:Voltage Regulator
  • 1. The X850 expansion board provides a storage solution for raspberry pi, It only supports mSATA SSD, and now it's V1.3 version.
  • Condition:New
  • 2. Supports USB 3.0.
Raspberry pi 3d printer controller New
ZJN-JN MAX6675 Type K Thermocouple Temperature Sensor Module 0-1024'C Temperature Testing Range for Raspberry Pi printer accessories PC Accessories
  • Chip cold junction compensation.
  • Simple SPI serial output temperature.
  • 2000V of ESD signal.
  • Thermocouple break detection.
  • Please feel free to contact us with any questions you may have.We'll get back to you as soon as we can.
Raspberry pi 3d printer controller New
MUKUAI56 Raspberry Pi 3 Model B+(Plus)/3B Msata Ssd Storage Expansion Board X850 V3.0 USB 3.0 Expansion Board Module for Raspberry Pi Computer DIY
  • They are good components for you diy.
  • Specially-made USB jumper to connect with Raspberry Pi-no additional cables needed
  • Quick file transfer with high-speed USB 3.0 connectivity from a PC or a ,USB bus-powered,LED blue indicator indicates drive status
  • Supports up to 1TB mSATA solid-state drive (SSD),Supports USB booting from your SSD,Perfect storage solution for Raspberry Pi
  • USB 3.1 Gen1 to SATA 6Gb/s bridge controller,USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
Raspberry pi 3d printer controller New
GYW-YW Module 7 Capacitive Touch Screen TFT LCD Display HDMI Module 800x480 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B
  • Support 864 x 480 x 24bit images content through SSD1963 controller .It also equips parallel MCU interfaces in different bus width to receive images data and command from MCU. Its display interface supports common RAM-less LCD driver of color depth up to 24 bit-perpixel. Warning: All data port voltage can not exceed 3.6V.
  • Operating voltage: 5V 1A power supply current requirements within the above 2A, On board 400mA DC-DC Boost regulator to provide power supply to LCD backlight.
  • Supports BB Black, comes with related images like: Angstrom. and also Supports Banana Pi/Banana Pro,comes with related images like: Lubuntu, Raspbian. We provided CD disk with related driver and souce code to you, If you are unsure about any of the technical issues.please contact us Freely.
  • Capacitive touch control and has vertical and horizontal image flip function. Image 4: 3 / 16: 9 display format conversion.
  • SC7B 7 HDMI LCD(B) Using standard HID protocol, so that you can migrate its to your own systems. With the use of Pi Raspberry, support Raspbian,Ubuntu,Windows 10 IoT Single-Touch, Free drive. When used as a computer monitor, support 10 / 8.1 / 8 / 7, Five point touch, Free drive
Raspberry pi 3d printer controller New
BIGTREETECH 3D Printer Upgrade Motherboard Octopus V1.1 Control Board 32bit Compatible TMC2209, TMC2208 Driver, Support DIY Klipper Firmware and Raspberry Pi Online Printing for Voron 3D Printer
  • 【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.
  • 【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V.
  • 【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to realize Klipper Firmware and Raspberry Pi Online Printing.
  • 【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion; at the same time reserved WIFI interface, PT100 thermistor interface (optional, Only reserved interfaces, customers need to purchase chip welding, please pay attention.), dual Z-axis printer.
  • 【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard. Supports “print from SD card” and “print via USB OTG” using the integrated USB-A port.
Raspberry pi 3d printer controller New
ZYY 7 Capacitive Touch Screen TFT LCD Display HDMI Module 800x480 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B
  • Support 864 x 480 x 24bit images content through SSD1963 controller .It also equips parallel MCU interfaces in different bus width to receive images data and command from MCU. Its display interface supports common RAM-less LCD driver of color depth up to 24 bit-perpixel. Warning: All data port voltage can not exceed 3.6V.
  • Operating voltage: 5V 1A power supply current requirements within the above 2A, On board 400mA DC-DC Boost regulator to provide power supply to LCD backlight.
  • Supports BB Black, comes with related images like: Angstrom. and also Supports Banana Pi/Banana Pro,comes with related images like: Lubuntu, Raspbian. We provided CD disk with related driver and souce code to you, If you are unsure about any of the technical issues.please contact us Freely.
  • Capacitive touch control and has vertical and horizontal image flip function. Image 4: 3 / 16: 9 display format conversion.
  • SC7B 7 HDMI LCD(B) Using standard HID protocol, so that you can migrate its to your own systems. With the use of Pi Raspberry, support Raspbian,Ubuntu,Windows 10 IoT Single-Touch, Free drive. When used as a computer monitor, support 10 / 8.1 / 8 / 7, Five point touch, Free drive
Raspberry pi 3d printer controller New
NGW-1pc Wio Terminal: ATSAMD51 Core with Realtek RTL8720DN BLE 5.0 & Wi-Fi 2.4G/5G Dev Board
  • [Highly Integrated Design] Wio Terminal development board has a 2.4 inch LCD screen, IMU (LIS3DHTR), microphone, buzzer, microSD card slot, Light sensor, infrared Emitter (IR 940nm) , and more practical add-ons housed in a compact enclosure with built-in magnets & mounting holes
  • [Powerful MCU&Reliable Wireless Connectivity] Microchip ATSAMD51P19 equipped with ARM Cortex-M4F core running at 120MHz. Wio Terminal has Realtek RTL8720DN, and supports dual band 2.4Ghz/5Ghz Wi-Fi, Bluetooth/ Bluetooth 5.0, etc. Wio Terminal board also has obtained FCC, CE certification
  • [Compatible for Raspberry Pi 40-pin ] Wio Terminal Can be mounted to a Raspberry Pi as a slave device, Raspberry Pi's HAT can also be used with an adapter cable. And since it supports over 300 IoT Grove modules, you can start programming directly and collect environmental data without the need for soldering or breadboards.
  • [USB OTG Support] OTG technology enables data transfer between devices without a host. It can be used as a USB host or USB client. Available Devices (USB Host): Mouse, Keyboard, MIDI Device, Xbox/PS Game Controller, 3D Printer; Device simulation (USB client): mouse, keyboard, MIDI device
  • [Software Support] Wio Terminal supports Arduino, MicroPython, ArduPy, AT firmware, Visual Studio code, CircuitPython (coming soon), etc. Note: ArduPy is a combination of Arduino and MicroPython developed by Seeed studio. See the Wiki for details. (Https://wiki.seeedstudio.com/Wio-Terminal-ArduPy/)
Raspberry pi 3d printer controller New
PUGONGYING Popular Fit For Spider V1.0 Motherboard 32Bit Controller Board TMC2208 TMC2209 3D Printer Part Replace SKR V1.3 For Voron durable (Color : 446 version, Size : With 12864 set 1)
  • - Compact size: 155.3mm x 76.5mm
  • - Based on STM32F446 180Mhz,all IOs can withstand 5V voltage
  • - 8 TMC stepper drivers support, with Uart&SPIsupport Improved TMC jumper settings again,simpler and easier
  • - 28V input max,[email protected] DC-DC,[email protected] DC-DC (Especially for Raspberry Pi),[email protected] LDO
  • - Two car fuses for hot bed input and main power input

Prices

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Raspberry pi 3d printer controller actually costs.

DISCOUNTLatest Raspberry pi 3d printer controller
KeeYees L298N Motor Drive Controller Board Stepper Motor Control Module Dual H-Bridge with DC Motor and Smart Car Wheel Compatible with Arduino
  • This is a good parts kit for an Arduino and raspberry pi based RC car project. It not only comes with 4pcs wheels and motors, but also 2pcs motor drive modules and 60pcs jumper wires, which are very useful accessories for your project.
  • Motor Drive Controller: L298N used as the main driver chip. It has the strong driving ability, low calorific value and strong anti-interference ability.
  • TT Motor: The motor is a two-axis motor with a reduction ratio of 1:48, which has strong anti-interference ability.
  • Smart Car Wheels: The wheels are made of high-strength plastic and the tires are made of durable black rubber.
  • To avoid damage the voltage stabilizing chip of Motor Drive Module, please use an external 5V logic supply when using more than 12V driving voltage.
Latest Raspberry pi 3d printer controller
NorthPada Raspberry Pi 3 Model B B+ A+ Plus Raspberry Pico Power Supply Cord 5V 3A PSU Micro USB 5 Feet with Power On/Off Switch, with a USB C Adapter for Raspberry Pi 4 Model B, Pi 400
  • A product of NorthPada; Input: AC 100-240V 0.3A 50/60Hz, Output: DC 5V 3000mA/3A
  • Cable Length: 150cm/5Feet with On/Off Power Switch, Inline Noise Filter
  • For Raspberry Pi 3 Model B B+ A+, Raspberry Pi 2 Model B, Raspberry Pi A/A+/B/B+, Raspberry Pi Zero, Raspberry Pi Pico, ASUS Tinker Board/S and other devices with Micro USB
  • Come with a micro USB to USB C Adapter, it can also support Raspberry Pi 4 Model B, Raspberry Pi 400
  • Package included: 1 x 5V power supply with micro usb, 1 x micro USB to USB C Adapter; Warranty: Money back within 90 Days and Replacement within 2 Years
Latest Raspberry pi 3d printer controller
U:Create Raspberry Pi 3 Model B+ Desktop Starter Kit (16Gb, Black)
  • The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT. The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market
  • 16GB MicroSD card preloaded with the latest version (V2) of NOOBS, including Raspbian, the official OS of the Raspberry Pi Foundation
  • Official Black Raspberry Pi 3 HAT compatible Case - Easy snap fit assembly
  • Official Black Raspberry Pi 5.1V 2.5A Power Supply (UK, EU)
Latest Raspberry pi 3d printer controller
GeeekPi 2PCS/Lot USB Controller Game Pad Joypad Joystick for PC Raspberry Pi 3 Model B Retropie
  • Compatible OS: WINDOWS98/2000/ME/XP Mac os .xv10.2.8
  • Fully tested to work with the Raspberry Pi 3 Model B and Retropie
  • Plug and Play. No extra drivers needed!
  • 3rd Party, Not original
  • Package Includes: 2 x USB Controller GAME PAD For PC Raspberry Pi 3 Retropie,1x Flannel Bag
DISCOUNTLatest Raspberry pi 3d printer controller
TP-Link AC600 USB Wi-Fi Dongle, Dual Band 5 GHz Wireless Adapter for PC, Desktop and Laptop, Supports Windows 10/8.1/8/7/XP, Mac OS 10.9-10.13 (Archer T2U Nano)
  • High speed Wi-Fi dongle - up to 600Mbps speeds with 200Mbps on 2.4GHz and 433 Mbps on 5GHz, upgrades your devices to higher AC Wi-Fi speeds
  • Dual band wireless adapter - 2.4GHz and 5GHz band for flexible connectivity, upgrades your devices to work with the latest dual-band Wi-Fi router for faster speed and extended range
  • Nano design USB Wi-Fi - Small, unobtrusive design allows you to plug it in and forget it is even there
  • Operating System – Supports Windows 10/8.1/8/7/XP, Mac OS 10.910.13
  • Advanced security –supports 64/128-bit WEP, WPA/WPA2, and WPA-PSK/WPA2-PSK encryption standards
Latest Raspberry pi 3d printer controller
BrosTrend 1200Mbps Linux USB WiFi Dongle for PC of Ubuntu, Mint, Debian, Kali, Kubuntu, Lubuntu, Xubuntu, Zorin, Raspberry Pi OS, Windows 10-XP, 5GHz / 867Mbps + 2.4GHz / 300Mbps (AC1L)
  • MULTI-OS SUPPORTED: Compatible with Linux Kernels up to 5.11, Ubuntu 21.04 ~ 16.04, Debian 10/9/8, Linux Mint 20/19/18, LMDE 4/3/2/1, Kali Linux, Raspberry Pi OS (Raspbian) 10/9/8, MATE, GNOME, Kubuntu, Lubuntu, Xubuntu, Ubuntu Studio, Budgie, Kylin, MX Linux, Pop! OS, Elementary OS, Zorin OS, KDE neon, antiX Linux, Q4OS, Parrot OS, PureOS, Bodhi, deepin, Linux Lite, SparkyLinux, Peppermint OS, Devuan; Windows 10/8.1/8/7/XP; MAC OS X 10.9-10.14
  • LINUX TECHNICAL SUPPORT TICKET INCLUDED: Please Send Email at [email protected] for Expertise Linux Wifi Adapter Technical Support, Please Tell Us Your Order Number and OS Type in the Email
  • FAST WI-FI SPEED: Linux 5GHz USB WIFI Dongle supplies 867Mbps Wi-Fi Speed on 5GHz Band or 300Mbps Speed on 2.4GHz Band, Best choice for Online 4K Video Streaming, Gaming, High Quality Music and Youtube by Using this AC1200 Dual Band Ubuntu USB Wifi Adapter; It can Works 4 Times Faster than 802.11b/g/n USB Wireless Adapter
  • USB 3.0 PORT SUPER SPEED WITH GOLD PLATED: Brings 10 Times Faster and More Solid Wireless Internet Connection; Also Backward Compatible with USB 2.0 Port; Your good choice of Ubuntu USB WIFI Dongle
  • WIFI CONNECTION SECURITY ENCRYPTION: This USB WIFI Dongle supports WPA2 (TKIP+AES), WPA, WEP, to Protect your Wifi Network Security
  • ADVANCED WPA3 SECURITY: Secure Your Devices and Network Privacy by Supporting the Latest Wireless Encryption: WPA3-SAE, WPA2/WPA/WEP, AES/PSK/TKIP, 802.1x
Latest Raspberry pi 3d printer controller
Raspberry Pi 3 Model A+, Cortex to 1.4GHZ, WiFi 5GHZ Motherboard (11811853)
  • Motherboard PI 3 Model A+
  • High quality
  • WiFi 5GHZ
  • Model number: 1811853
Latest Raspberry pi 3d printer controller
GeeekPi 2PCS Raspberry Pi 4 Fan DC 5V Brushless CPU RGB Cooling Fan 40x40x10mm, for Raspberry Pi 4 Model B,3B+,Raspberry Pi 3/2 Model B (Multi-coloured)
  • Used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+ or other development board
  • The DC 5V cooling fan run smoothly and quietly and it's good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
  • Fan Size: 40x40x10mm
  • Package Includes: 2x Cooling Fan, 2x Screw Set.4 Pack Version,please refer to Asin: B084RKPK23
  • NOTE: Raspberry Pi Not Included
Latest Raspberry pi 3d printer controller
GeeekPi Raspberry Pi 4 Extreme Cooling Fan Kit, Aluminum Heatsink with Cooling Fan for Raspberry Pi 4B & Raspberry Pi 3 B+(B PLUS) & Raspberry Pi 3B
  • It's fit for Raspberry Pi 4B and Raspberry Pi 3B+/3B; It's compatible with most of cases in the market;
  • Use CNC Machining manufacturing technology for Aluminum heatsink; With 2pcs little thermal tapes to attach to the CPU and LAN tightly for better dissipation;
  • The cooling fan updated to 3510 version and it will be more quiet and powerful for heat dissipation of Raspberry Pi Board;
  • Raspberry Pi Board Not Included!
  • Package Includes: 1x Cooling Kit( Aluminum Heatsink with Cooling Fan), 1x Think Copper Heatsink For Pi 3B+/3B, 2x Thermal Tapes for Pi 3B+/3B,2x Thermal Tapes for Pi 4B
DISCOUNTLatest Raspberry pi 3d printer controller
ELEGOO Relay Module 4 Channel DC 5V with Optocoupler for Arduino UNO R3 MEGA Project 1280 DSP ARM PIC AVR STM32 Raspberry Pi
  • This relay module is 5V active low. Relay output maximum contact is AC250V 10A and DC30V 10A.
  • Standard interface can be directly connected with microcontrollers. This kit is compatible with Arduino IDE, Raspberry Pi and STM32
  • Working status indicator lights are conducive for the safety use
  • 4-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other equipments with large current.
  • Widely used for all MCU control, industrial sector, PLC control, smart home control.

Promotions and Deals (UK) 2021

During the year there are many promotions on products for sale online and Raspberry pi 3d printer controller could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Raspberry pi 3d printer controller which are among the cheapest on the market. Just scroll through the list to find Raspberry pi 3d printer controller the cheapest products.

2021 Catalog

The product Raspberry pi 3d printer controller can be found in the dedicated catalog where the entire list of products on sale is presented. Raspberry pi 3d printer controller is included in the 2021 catalog presentation along with the family of products belonging to the Brand. The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Raspberry pi 3d printer controller New
MUKUAI56 Raspberry Pi 3 Model B+(Plus)/3B Msata Ssd Storage Expansion Board X850 V3.0 USB 3.0 Expansion Board Module for Raspberry Pi Computer DIY
  • They are good components for you diy.
  • Specially-made USB jumper to connect with Raspberry Pi-no additional cables needed
  • Quick file transfer with high-speed USB 3.0 connectivity from a PC or a ,USB bus-powered,LED blue indicator indicates drive status
  • Supports up to 1TB mSATA solid-state drive (SSD),Supports USB booting from your SSD,Perfect storage solution for Raspberry Pi
  • USB 3.1 Gen1 to SATA 6Gb/s bridge controller,USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
Raspberry pi 3d printer controller New
YASEKING Raspberry Pi X850 Msata Ssd Disk Expansion Board Supports 1Tb Usb 3.0
  • X850 mSATA SSD Hard Disk Storage Expansion Board for Raspberry Pi Support USB 3.0
  • Type:Voltage Regulator
  • 1. The X850 expansion board provides a storage solution for raspberry pi, It only supports mSATA SSD, and now it's V1.3 version.
  • Condition:New
  • 2. Supports USB 3.0.
Raspberry pi 3d printer controller New
ZJN-JN MAX6675 Type K Thermocouple Temperature Sensor Module 0-1024'C Temperature Testing Range for Raspberry Pi printer accessories PC Accessories
  • Chip cold junction compensation.
  • Simple SPI serial output temperature.
  • 2000V of ESD signal.
  • Thermocouple break detection.
  • Please feel free to contact us with any questions you may have.We'll get back to you as soon as we can.
Raspberry pi 3d printer controller New
MUKUAI56 Raspberry Pi 3 Model B+(Plus)/3B Msata Ssd Storage Expansion Board X850 V3.0 USB 3.0 Expansion Board Module for Raspberry Pi Computer DIY
  • They are good components for you diy.
  • Specially-made USB jumper to connect with Raspberry Pi-no additional cables needed
  • Quick file transfer with high-speed USB 3.0 connectivity from a PC or a ,USB bus-powered,LED blue indicator indicates drive status
  • Supports up to 1TB mSATA solid-state drive (SSD),Supports USB booting from your SSD,Perfect storage solution for Raspberry Pi
  • USB 3.1 Gen1 to SATA 6Gb/s bridge controller,USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
Raspberry pi 3d printer controller New
GYW-YW Module 7 Capacitive Touch Screen TFT LCD Display HDMI Module 800x480 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B
  • Support 864 x 480 x 24bit images content through SSD1963 controller .It also equips parallel MCU interfaces in different bus width to receive images data and command from MCU. Its display interface supports common RAM-less LCD driver of color depth up to 24 bit-perpixel. Warning: All data port voltage can not exceed 3.6V.
  • Operating voltage: 5V 1A power supply current requirements within the above 2A, On board 400mA DC-DC Boost regulator to provide power supply to LCD backlight.
  • Supports BB Black, comes with related images like: Angstrom. and also Supports Banana Pi/Banana Pro,comes with related images like: Lubuntu, Raspbian. We provided CD disk with related driver and souce code to you, If you are unsure about any of the technical issues.please contact us Freely.
  • Capacitive touch control and has vertical and horizontal image flip function. Image 4: 3 / 16: 9 display format conversion.
  • SC7B 7 HDMI LCD(B) Using standard HID protocol, so that you can migrate its to your own systems. With the use of Pi Raspberry, support Raspbian,Ubuntu,Windows 10 IoT Single-Touch, Free drive. When used as a computer monitor, support 10 / 8.1 / 8 / 7, Five point touch, Free drive
Raspberry pi 3d printer controller New
BIGTREETECH 3D Printer Upgrade Motherboard Octopus V1.1 Control Board 32bit Compatible TMC2209, TMC2208 Driver, Support DIY Klipper Firmware and Raspberry Pi Online Printing for Voron 3D Printer
  • 【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.
  • 【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V.
  • 【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to realize Klipper Firmware and Raspberry Pi Online Printing.
  • 【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion; at the same time reserved WIFI interface, PT100 thermistor interface (optional, Only reserved interfaces, customers need to purchase chip welding, please pay attention.), dual Z-axis printer.
  • 【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard. Supports “print from SD card” and “print via USB OTG” using the integrated USB-A port.
Raspberry pi 3d printer controller New
ZYY 7 Capacitive Touch Screen TFT LCD Display HDMI Module 800x480 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B
  • Support 864 x 480 x 24bit images content through SSD1963 controller .It also equips parallel MCU interfaces in different bus width to receive images data and command from MCU. Its display interface supports common RAM-less LCD driver of color depth up to 24 bit-perpixel. Warning: All data port voltage can not exceed 3.6V.
  • Operating voltage: 5V 1A power supply current requirements within the above 2A, On board 400mA DC-DC Boost regulator to provide power supply to LCD backlight.
  • Supports BB Black, comes with related images like: Angstrom. and also Supports Banana Pi/Banana Pro,comes with related images like: Lubuntu, Raspbian. We provided CD disk with related driver and souce code to you, If you are unsure about any of the technical issues.please contact us Freely.
  • Capacitive touch control and has vertical and horizontal image flip function. Image 4: 3 / 16: 9 display format conversion.
  • SC7B 7 HDMI LCD(B) Using standard HID protocol, so that you can migrate its to your own systems. With the use of Pi Raspberry, support Raspbian,Ubuntu,Windows 10 IoT Single-Touch, Free drive. When used as a computer monitor, support 10 / 8.1 / 8 / 7, Five point touch, Free drive
Raspberry pi 3d printer controller New
NGW-1pc Wio Terminal: ATSAMD51 Core with Realtek RTL8720DN BLE 5.0 & Wi-Fi 2.4G/5G Dev Board
  • [Highly Integrated Design] Wio Terminal development board has a 2.4 inch LCD screen, IMU (LIS3DHTR), microphone, buzzer, microSD card slot, Light sensor, infrared Emitter (IR 940nm) , and more practical add-ons housed in a compact enclosure with built-in magnets & mounting holes
  • [Powerful MCU&Reliable Wireless Connectivity] Microchip ATSAMD51P19 equipped with ARM Cortex-M4F core running at 120MHz. Wio Terminal has Realtek RTL8720DN, and supports dual band 2.4Ghz/5Ghz Wi-Fi, Bluetooth/ Bluetooth 5.0, etc. Wio Terminal board also has obtained FCC, CE certification
  • [Compatible for Raspberry Pi 40-pin ] Wio Terminal Can be mounted to a Raspberry Pi as a slave device, Raspberry Pi's HAT can also be used with an adapter cable. And since it supports over 300 IoT Grove modules, you can start programming directly and collect environmental data without the need for soldering or breadboards.
  • [USB OTG Support] OTG technology enables data transfer between devices without a host. It can be used as a USB host or USB client. Available Devices (USB Host): Mouse, Keyboard, MIDI Device, Xbox/PS Game Controller, 3D Printer; Device simulation (USB client): mouse, keyboard, MIDI device
  • [Software Support] Wio Terminal supports Arduino, MicroPython, ArduPy, AT firmware, Visual Studio code, CircuitPython (coming soon), etc. Note: ArduPy is a combination of Arduino and MicroPython developed by Seeed studio. See the Wiki for details. (Https://wiki.seeedstudio.com/Wio-Terminal-ArduPy/)
Raspberry pi 3d printer controller New
PUGONGYING Popular Fit For Spider V1.0 Motherboard 32Bit Controller Board TMC2208 TMC2209 3D Printer Part Replace SKR V1.3 For Voron durable (Color : 446 version, Size : With 12864 set 1)
  • - Compact size: 155.3mm x 76.5mm
  • - Based on STM32F446 180Mhz,all IOs can withstand 5V voltage
  • - 8 TMC stepper drivers support, with Uart&SPIsupport Improved TMC jumper settings again,simpler and easier
  • - 28V input max,[email protected] DC-DC,[email protected] DC-DC (Especially for Raspberry Pi),[email protected] LDO
  • - Two car fuses for hot bed input and main power input

Where to buy?

If you are asking yourself where to buy Raspberry pi 3d printer controller? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Raspberry pi 3d printer controller, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Stores In a physical store instead you can try the product with your own hands, you can directly see Raspberry pi 3d printer controller and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Raspberry pi 3d printer controller may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Raspberry pi 3d printer controller used.

Promo Codes 2021

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Raspberry pi 3d printer controller at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

ZYY 7 Capacitive Touch Screen TFT LCD Display HDMI Module 800x480 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B
  • Support 864 x 480 x 24bit images content through SSD1963 controller .It also equips parallel MCU interfaces in different bus width to receive images data and command from MCU. Its display interface supports common RAM-less LCD driver of color depth up to 24 bit-perpixel. Warning: All data port voltage can not exceed 3.6V.
  • Operating voltage: 5V 1A power supply current requirements within the above 2A, On board 400mA DC-DC Boost regulator to provide power supply to LCD backlight.
  • Supports BB Black, comes with related images like: Angstrom. and also Supports Banana Pi/Banana Pro,comes with related images like: Lubuntu, Raspbian. We provided CD disk with related driver and souce code to you, If you are unsure about any of the technical issues.please contact us Freely.
  • Capacitive touch control and has vertical and horizontal image flip function. Image 4: 3 / 16: 9 display format conversion.
  • SC7B 7 HDMI LCD(B) Using standard HID protocol, so that you can migrate its to your own systems. With the use of Pi Raspberry, support Raspbian,Ubuntu,Windows 10 IoT Single-Touch, Free drive. When used as a computer monitor, support 10 / 8.1 / 8 / 7, Five point touch, Free drive
GYW-YW Module 7 Capacitive Touch Screen TFT LCD Display HDMI Module 800x480 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B
  • Support 864 x 480 x 24bit images content through SSD1963 controller .It also equips parallel MCU interfaces in different bus width to receive images data and command from MCU. Its display interface supports common RAM-less LCD driver of color depth up to 24 bit-perpixel. Warning: All data port voltage can not exceed 3.6V.
  • Operating voltage: 5V 1A power supply current requirements within the above 2A, On board 400mA DC-DC Boost regulator to provide power supply to LCD backlight.
  • Supports BB Black, comes with related images like: Angstrom. and also Supports Banana Pi/Banana Pro,comes with related images like: Lubuntu, Raspbian. We provided CD disk with related driver and souce code to you, If you are unsure about any of the technical issues.please contact us Freely.
  • Capacitive touch control and has vertical and horizontal image flip function. Image 4: 3 / 16: 9 display format conversion.
  • SC7B 7 HDMI LCD(B) Using standard HID protocol, so that you can migrate its to your own systems. With the use of Pi Raspberry, support Raspbian,Ubuntu,Windows 10 IoT Single-Touch, Free drive. When used as a computer monitor, support 10 / 8.1 / 8 / 7, Five point touch, Free drive
ZJN-JN MAX6675 Type K Thermocouple Temperature Sensor Module 0-1024'C Temperature Testing Range for Raspberry Pi printer accessories PC Accessories
  • Chip cold junction compensation.
  • Simple SPI serial output temperature.
  • 2000V of ESD signal.
  • Thermocouple break detection.
  • Please feel free to contact us with any questions you may have.We'll get back to you as soon as we can.
PUGONGYING Popular Fit For Spider V1.0 Motherboard 32Bit Controller Board TMC2208 TMC2209 3D Printer Part Replace SKR V1.3 For Voron durable (Color : 446 version, Size : With 12864 set 1)
  • - Compact size: 155.3mm x 76.5mm
  • - Based on STM32F446 180Mhz,all IOs can withstand 5V voltage
  • - 8 TMC stepper drivers support, with Uart&SPIsupport Improved TMC jumper settings again,simpler and easier
  • - 28V input max,[email protected] DC-DC,[email protected] DC-DC (Especially for Raspberry Pi),[email protected] LDO
  • - Two car fuses for hot bed input and main power input
BIGTREETECH 3D Printer Upgrade Motherboard Octopus V1.1 Control Board 32bit Compatible TMC2209, TMC2208 Driver, Support DIY Klipper Firmware and Raspberry Pi Online Printing for Voron 3D Printer
  • 【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.
  • 【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V.
  • 【Realize Online Printing】Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to realize Klipper Firmware and Raspberry Pi Online Printing.
  • 【Motherboard Expansion Function】Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion; at the same time reserved WIFI interface, PT100 thermistor interface (optional, Only reserved interfaces, customers need to purchase chip welding, please pay attention.), dual Z-axis printer.
  • 【Increase Protection Function】Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard. Supports “print from SD card” and “print via USB OTG” using the integrated USB-A port.
MUKUAI56 Raspberry Pi 3 Model B+(Plus)/3B Msata Ssd Storage Expansion Board X850 V3.0 USB 3.0 Expansion Board Module for Raspberry Pi Computer DIY
  • They are good components for you diy.
  • Specially-made USB jumper to connect with Raspberry Pi-no additional cables needed
  • Quick file transfer with high-speed USB 3.0 connectivity from a PC or a ,USB bus-powered,LED blue indicator indicates drive status
  • Supports up to 1TB mSATA solid-state drive (SSD),Supports USB booting from your SSD,Perfect storage solution for Raspberry Pi
  • USB 3.1 Gen1 to SATA 6Gb/s bridge controller,USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi
MUKUAI56 Raspberry Pi 3 Model B+(Plus)/3B Msata Ssd Storage Expansion Board X850 V3.0 USB 3.0 Expansion Board Module for Raspberry Pi Computer DIY
  • They are good components for you diy.
  • Specially-made USB jumper to connect with Raspberry Pi-no additional cables needed
  • Quick file transfer with high-speed USB 3.0 connectivity from a PC or a ,USB bus-powered,LED blue indicator indicates drive status
  • Supports up to 1TB mSATA solid-state drive (SSD),Supports USB booting from your SSD,Perfect storage solution for Raspberry Pi
  • USB 3.1 Gen1 to SATA 6Gb/s bridge controller,USB 2.0 connectivity offers plug-and-play functionality on your Raspberry Pi

Others Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Raspberry pi 3d printer controller.

Rating: 3.4 of 5 - 25 votes
1 Star2 Stars3 Stars4 Stars5 Stars (25 votes, average: 3.40 out of 5)
Loading...