Ramps 3d printer controller Reviews and Best Deals

Online product reviews and comparisons for Ramps 3d printer controller.

Latest Ramps 3d printer controller
Youmile 3D Printer Controller Board RAMPS 1.6 3D Printer Controller Kit Board for Arduino + 5PACK A4988 Stepper Motor Driver + LCD 12864 for Arduino Reprap
  • 【Upgraded Version】same structure as Ramps 1.5, have new 2pin connectors, have a good Heatsink above MOS tube in order to give a better function to heat dissipation, the Power is larger, the largest power will be up to or 270W.
  • 【A4988 Driver board】 widely used in 3D printers, having five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step; 3.3 and 5 V compatible logic supply; Test Stepper Motor File: https://bit.ly/2BnHlLs
  • 【12864 LCD】The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS 1.6 board using "smart adapter" included.
  • 【Board for Arduino】Operating Voltage: 5V, Input Voltage (recommended):7-12V, Input Voltage (limits):6-20V,-Digital I/O Pins: 54 (of which 14 provide PWM output)
  • 【Package include】 1 x RAMPS 1.6 Board,1 x Board for Arduino,1 x 12864 LCD Display Controller,1 x LCD Smart Adapter,5 x A4988 Stepper,1 x 40pin Dupont Cable Female to Female,1 x 40pin Dupont Cable Female to Male
Latest Ramps 3d printer controller
Set of 3D Printer RAMPS 1.4 Controller - including Mega 2560 R3 Board,Soldered A4988 Drivers,Heat Sinks and USB Cable+Jumpers
  • The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package for low cost
  • RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion
  • Additionally, a number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack
  • With the boot-loader, download the program directly via USB without having to go through other external writer
Latest Ramps 3d printer controller
Redrex 2004 LCD Smart Display Controller Module with Adapter for 3D Printer Controller RAMPS 1.4 Arduino Mega Pololu Shield
  • Popular RepRap 3D Printer LCD Controller and SD Card Reader
  • Included adapter for RAMPS 1.4 board
  • Fully supported by Marlin firmware
  • With Smart LCD Controller you can print 3D designs without USB connection to your computer
Latest Ramps 3d printer controller
3D Printer Controller Kit RAMPS 1.4 Controller+Mega 2560 Board+Soldered A4988 Drivers+Heatsinks+USB Cable+Jumper
  • The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package for low cost;RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion
  • Mega is an ATmega2560 as core micro-controller development board itself has 54 groups digital I/O input/output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator
  • A4988 driver is a carrier board or breakout board for Allegro's A4988 DMOS micro-stepping driver with translator and Over current Protection by Pololu
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion
  • Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery
Latest Ramps 3d printer controller
Yardwe 3D Printer Kit with RAMPS 1.4 Controller + Mega 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter for Arduino RepRap
  • 12864 LCD Controller: You can easy Connect it to your Ramps Board using the "Smart Adapter" included. After Connecting this Panel to your Ramps you don't need your pc any more, the Smart Controller Supplies Power for your SD card.
  • RAMPS 1.4: The Modular Design includes Plug in Stepper Drivers and Extruder Control Electronics on an Arduino MEGA Shield.
  • 4988 Stepper Motor Driver: Five different stepping modes: full, half, 1/4, 1/8 and 1/16; Adjustable potentiometer can adjust the maximum current output, can get better step rate. Ground short-circuit protection and load short-circuit protection.
Latest Ramps 3d printer controller
DollaTek 3D Printer Controller Kit Ramps 1.4 + Full Graphic Smart Display Controller + Mega2560 + A4988 Stepper Motor Driver for RepRap (12864 LCD Full Graphic Smart Display Controller)
  • Support 8 GB
  • It contains a SD-Card reader and an rotary encoder
  • Graphic Smart Controller with 128 x 64 dot matrix LCD 12864 display
  • Easy to connect to Ramps board with the included smart adapter
  • With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing
Latest Ramps 3d printer controller
3D Printer Kit for Mega 2560 R3 + RAMPS 1.4 Controller + 5 A4988 Stepper Driver with Heat Sink USB Cable Jumper Kit 3D Printer Interface & Driver Modules
  • 【Boot-loader】: With the boot-loader, download the program directly via USB without having to go through other external writer
  • 【Exquisite Design】: The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion
  • 【More Additions】: Additionally, a number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack
  • 【Enough Expansion Space】: RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion
  • 【Low Cost】: The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package for low cost
Latest Ramps 3d printer controller
RAMPS Kit,RAMPS Controller Module 3D Printer RAMPS 1.4 Controller + MEGA2560 R3 + A4988 with Heat Sink USB Kit
  • 1.Small package large capacity: The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package for low cost,interfaces an Mega with the powerful MEGA platform and has plenty room for expansion.
  • 2.Modular design: The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion.
  • 3.Docking Mega platform: Mega is an ATmega2560 as core micro-controller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator.
  • 4.USB direct download: With the boot-loader, download the program directly via USB without having to go through other external writer.
  • 5.Overcurrent protection: A4988 driver is a carrier board or breakout board for Allegro's A4988 DMOS micro-stepping driver with translator and Over current Protection by Pololu.
Latest Ramps 3d printer controller
Acogedor 3D Printer Controller Kit with RAMPS 1.4 Board+Mega 2560 R3 Board+5pcs Soldered A4988 Drivers+5pcs Heat Sinks+USB Cable+19pcs Jumpers
  • The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package for low cost
  • RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion
  • Additionally, a number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack
  • With the boot-loader, download the program directly via USB without having to go through other external writer

Buy Ramps 3d printer controller from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Ramps 3d printer controller, buy Ramps 3d printer controller directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Ramps 3d printer controller including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


Best
Youmile 3D Printer Controller Board RAMPS 1.6 3D Printer Controller Kit Board for Arduino + 5PACK A4988 Stepper Motor Driver + LCD 12864 for Arduino Reprap
  • 【Upgraded Version】same structure as Ramps 1.5, have new 2pin connectors, have a good Heatsink above MOS tube in order to give a better function to heat dissipation, the Power is larger, the largest power will be up to or 270W.
  • 【A4988 Driver board】 widely used in 3D printers, having five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step; 3.3 and 5 V compatible logic supply; Test Stepper Motor File: https://bit.ly/2BnHlLs
  • 【12864 LCD】The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS 1.6 board using "smart adapter" included.
  • 【Board for Arduino】Operating Voltage: 5V, Input Voltage (recommended):7-12V, Input Voltage (limits):6-20V,-Digital I/O Pins: 54 (of which 14 provide PWM output)
  • 【Package include】 1 x RAMPS 1.6 Board,1 x Board for Arduino,1 x 12864 LCD Display Controller,1 x LCD Smart Adapter,5 x A4988 Stepper,1 x 40pin Dupont Cable Female to Female,1 x 40pin Dupont Cable Female to Male
Best
Set of 3D Printer RAMPS 1.4 Controller - including Mega 2560 R3 Board,Soldered A4988 Drivers,Heat Sinks and USB Cable+Jumpers
  • The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package for low cost
  • RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion
  • Additionally, a number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack
  • With the boot-loader, download the program directly via USB without having to go through other external writer
Best
SODIAL(R) 3D Printer Controller for RAMPS 1.4 Reprap Mendel Prusa Arduino Boards
  • 100% Brand New and High Quality
  • Fully assembled & tested, no soldering required.
  • It is designed to fit the entire electronics needed for a RepRap in one small package for low cost.
  • The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion.
  • A number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
Best
3D Printer Controller Kit RAMPS 1.4 Controller+Mega 2560 Board+Soldered A4988 Drivers+Heatsinks+USB Cable+Jumper
  • The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package for low cost;RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion
  • Mega is an ATmega2560 as core micro-controller development board itself has 54 groups digital I/O input/output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator
  • A4988 driver is a carrier board or breakout board for Allegro's A4988 DMOS micro-stepping driver with translator and Over current Protection by Pololu
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion
  • Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery
Best
Yardwe 3D Printer Kit with RAMPS 1.4 Controller + Mega 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter for Arduino RepRap
  • 12864 LCD Controller: You can easy Connect it to your Ramps Board using the "Smart Adapter" included. After Connecting this Panel to your Ramps you don't need your pc any more, the Smart Controller Supplies Power for your SD card.
  • RAMPS 1.4: The Modular Design includes Plug in Stepper Drivers and Extruder Control Electronics on an Arduino MEGA Shield.
  • 4988 Stepper Motor Driver: Five different stepping modes: full, half, 1/4, 1/8 and 1/16; Adjustable potentiometer can adjust the maximum current output, can get better step rate. Ground short-circuit protection and load short-circuit protection.

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Ramps 3d printer controller

Here is the ranking of the best Ramps 3d printer controller, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Ramps 3d printer controller and read the reviews left by real customers, see the Ramps 3d printer controller ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Ramps 3d printer controller New
NaiCasy LCD Screen Controller Screen Display Hat LCD Controller Board Panel with Cable for 3D Printer Kit Accessory
  • This 12864 LCD intelligent screen controller is for 3D printers
  • The built-in encoder of the LCD controller board allows you to adjust the parameters and select the file to be printed
  • LCD screen display has large screen with clear white characters and blue backlight
  • Adjust and press the round button to control,the reset button with buzzer reminder for display screen controller is easy to operate
  • This display screen controller support RAMPS 1.4 control board
Ramps 3d printer controller New
luoshan New Pololu Shield Ramps-FD for Arduino Due 3D Printer Controller
  • New Pololu Shield Ramps-FD for Arduino Due 3D Printer Controller
  • Provides a higher finish quality, good coating adhesion and reliability.
  • Compact design, small size, suitable for any desk
Ramps 3d printer controller New
LISUONG JZFF AYCC New Pololu Shield Ramps-FD for Arduino Due 3D Printer Controller
  • This is a professional, brand-new, high-quality product that has received universal acclaim.
  • High-tech products, durable, suitable for 3D printers.
  • The seller provides good after-sales service and is reliable.
  • Abundant inventory and fast delivery.
  • New Pololu Shield Ramps-FD for Arduino Due 3D Printer Controller
Ramps 3d printer controller New
AITRIP LCD 2004 LCD Screen Smart Display Screen Controller Module with Cable for RAMPS 1.4 Arduino Mega Pololu Shield Arduino Reprap 3D Printer Kit Accessory
  • Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc
  • LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file via the LCD control panel
  • 2004 LCD smart controller for 3D printer,Supports for RAMPS 1.4 control board
  • This panel connect your RAMPS 1.4. 3D design print without a computer, just use the G code design stored on the SD card, SD card intelligent controller power supply. With Smart LCD Controller you can print 3D designs without USB connection to your computer
  • A LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking
Ramps 3d printer controller New
Aoicrie Ramps 1.6 Plus Expansion Control Panel with Heatsink Upgraded Ramps 1.4 3D Motherboard Support A4988 DRV8825 TMC2130 Driver Reprap Mendel for 3D Printer Board Parts
  • RAMPS 1.6 interface board with new, more powerful SMT MOSFET drivers
  • Improved heat dissipation with new heat sink,the PCB has a built-in selection terminal for driving the SPI working mode, and is compatible with STEP/DIR and SPI modes
  • The power supply and hot bed use 30A high-current terminal block, to avoid the situation of burning terminals to a greater extent
  • Added a reset expansion interface, convenient for users to extend the reset button, X, Y, Z, E0, E1 all use parallel dual motor interface, so that the board is suitable for more models
  • Design of plate pin socket can be easily replaced or removed for future design, Changed the silk screen, making the wiring clear at a glance. Using a combination of colored pin headers and mothers, effectively distinguishing each functional interface, both beautiful and practical
Ramps 3d printer controller New
MKS Gen L V2.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard 1PCS
  • ฅฅ Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable
  • ฅฅ Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly
  • ฅฅ Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS
  • ฅฅ TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently
  • ฅฅ Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces
Ramps 3d printer controller New
Tosuny LCD Screen for Creality CR-10S / S4 / S5, CR10s LCD Screen, Replacement LCD Screen Controller Display with 2 Cable for Creality CR-10S 3D Printer, 3D Printer Kit Accessory
  • Replacement LCD screen display for Creality CR-10S 3D printer.
  • Supports for RAMPS 1.4 control board.
  • Clear white characters with blue backlit.
  • Supports for selecting the files to print.
  • Comes with two connecting cables.
Ramps 3d printer controller New
KINGPRINT 3D Printer Main Board MKS Base V1.6 Integrated Motherboard Compatible Mega 2560 & 1.4 Control Board RepRap Mendel
  • Arduino MEGA compatible Atmega2560 and FT232 processors are compatible with all RAMPS class firmware.
  • Easy DISPLAY + SD-CARD connector, RepRap Discount SmartController compatible pin header on board.
  • Recoverable fuse for short-circuit protection. MKS BASE is suitable for dual-Extruder machine.
  • It features an onboard ATmega2560. Its five motor outputs are powered by A4982 stepper drivers.
  • 6x end stop connectors with power supply Xmin/Xmax/Ymin/Ymax/Zmin/Zmax.
Ramps 3d printer controller New
3D Printer Controller Kit RepRap, RAMPS 1.4 + 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display
  • 2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
  • RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an for Arduino shield for easy service, part replacement, upgrade-ability and expansion. for Additionally, a number of for Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro¡¯s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefullybefore using this product.
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered isasking for trouble.)

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Ramps 3d printer controller. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Ramps 3d printer controller give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

NaiCasy LCD Screen Controller Screen Display Hat LCD Controller Board Panel with Cable for 3D Printer Kit Accessory
  • This 12864 LCD intelligent screen controller is for 3D printers
  • The built-in encoder of the LCD controller board allows you to adjust the parameters and select the file to be printed
  • LCD screen display has large screen with clear white characters and blue backlight
  • Adjust and press the round button to control,the reset button with buzzer reminder for display screen controller is easy to operate
  • This display screen controller support RAMPS 1.4 control board
Aoicrie Ramps 1.6 Plus Expansion Control Panel with Heatsink Upgraded Ramps 1.4 3D Motherboard Support A4988 DRV8825 TMC2130 Driver Reprap Mendel for 3D Printer Board Parts
  • RAMPS 1.6 interface board with new, more powerful SMT MOSFET drivers
  • Improved heat dissipation with new heat sink,the PCB has a built-in selection terminal for driving the SPI working mode, and is compatible with STEP/DIR and SPI modes
  • The power supply and hot bed use 30A high-current terminal block, to avoid the situation of burning terminals to a greater extent
  • Added a reset expansion interface, convenient for users to extend the reset button, X, Y, Z, E0, E1 all use parallel dual motor interface, so that the board is suitable for more models
  • Design of plate pin socket can be easily replaced or removed for future design, Changed the silk screen, making the wiring clear at a glance. Using a combination of colored pin headers and mothers, effectively distinguishing each functional interface, both beautiful and practical
3D Printer Controller Kit RepRap, RAMPS 1.4 + 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display
  • 2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
  • RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an for Arduino shield for easy service, part replacement, upgrade-ability and expansion. for Additionally, a number of for Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro¡¯s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefullybefore using this product.
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered isasking for trouble.)
AITRIP LCD 2004 LCD Screen Smart Display Screen Controller Module with Cable for RAMPS 1.4 Arduino Mega Pololu Shield Arduino Reprap 3D Printer Kit Accessory
  • Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc
  • LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file via the LCD control panel
  • 2004 LCD smart controller for 3D printer,Supports for RAMPS 1.4 control board
  • This panel connect your RAMPS 1.4. 3D design print without a computer, just use the G code design stored on the SD card, SD card intelligent controller power supply. With Smart LCD Controller you can print 3D designs without USB connection to your computer
  • A LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking
MKS Gen L V2.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard 1PCS
  • ฅฅ Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable
  • ฅฅ Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly
  • ฅฅ Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS
  • ฅฅ TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently
  • ฅฅ Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Ramps 3d printer controller actually costs.

Latest Ramps 3d printer controller
Youmile 3D Printer Controller Board RAMPS 1.6 3D Printer Controller Kit Board for Arduino + 5PACK A4988 Stepper Motor Driver + LCD 12864 for Arduino Reprap
  • 【Upgraded Version】same structure as Ramps 1.5, have new 2pin connectors, have a good Heatsink above MOS tube in order to give a better function to heat dissipation, the Power is larger, the largest power will be up to or 270W.
  • 【A4988 Driver board】 widely used in 3D printers, having five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step; 3.3 and 5 V compatible logic supply; Test Stepper Motor File: https://bit.ly/2BnHlLs
  • 【12864 LCD】The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS 1.6 board using "smart adapter" included.
  • 【Board for Arduino】Operating Voltage: 5V, Input Voltage (recommended):7-12V, Input Voltage (limits):6-20V,-Digital I/O Pins: 54 (of which 14 provide PWM output)
  • 【Package include】 1 x RAMPS 1.6 Board,1 x Board for Arduino,1 x 12864 LCD Display Controller,1 x LCD Smart Adapter,5 x A4988 Stepper,1 x 40pin Dupont Cable Female to Female,1 x 40pin Dupont Cable Female to Male
Latest Ramps 3d printer controller
Set of 3D Printer RAMPS 1.4 Controller - including Mega 2560 R3 Board,Soldered A4988 Drivers,Heat Sinks and USB Cable+Jumpers
  • The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package for low cost
  • RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion
  • Additionally, a number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack
  • With the boot-loader, download the program directly via USB without having to go through other external writer
Latest Ramps 3d printer controller
Redrex 2004 LCD Smart Display Controller Module with Adapter for 3D Printer Controller RAMPS 1.4 Arduino Mega Pololu Shield
  • Popular RepRap 3D Printer LCD Controller and SD Card Reader
  • Included adapter for RAMPS 1.4 board
  • Fully supported by Marlin firmware
  • With Smart LCD Controller you can print 3D designs without USB connection to your computer
Latest Ramps 3d printer controller
3D Printer Controller Kit RAMPS 1.4 Controller+Mega 2560 Board+Soldered A4988 Drivers+Heatsinks+USB Cable+Jumper
  • The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package for low cost;RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion
  • Mega is an ATmega2560 as core micro-controller development board itself has 54 groups digital I/O input/output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator
  • A4988 driver is a carrier board or breakout board for Allegro's A4988 DMOS micro-stepping driver with translator and Over current Protection by Pololu
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion
  • Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery
Latest Ramps 3d printer controller
Yardwe 3D Printer Kit with RAMPS 1.4 Controller + Mega 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display Controller with Adapter for Arduino RepRap
  • 12864 LCD Controller: You can easy Connect it to your Ramps Board using the "Smart Adapter" included. After Connecting this Panel to your Ramps you don't need your pc any more, the Smart Controller Supplies Power for your SD card.
  • RAMPS 1.4: The Modular Design includes Plug in Stepper Drivers and Extruder Control Electronics on an Arduino MEGA Shield.
  • 4988 Stepper Motor Driver: Five different stepping modes: full, half, 1/4, 1/8 and 1/16; Adjustable potentiometer can adjust the maximum current output, can get better step rate. Ground short-circuit protection and load short-circuit protection.
Latest Ramps 3d printer controller
DollaTek 3D Printer Controller Kit Ramps 1.4 + Full Graphic Smart Display Controller + Mega2560 + A4988 Stepper Motor Driver for RepRap (12864 LCD Full Graphic Smart Display Controller)
  • Support 8 GB
  • It contains a SD-Card reader and an rotary encoder
  • Graphic Smart Controller with 128 x 64 dot matrix LCD 12864 display
  • Easy to connect to Ramps board with the included smart adapter
  • With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing
Latest Ramps 3d printer controller
3D Printer Kit for Mega 2560 R3 + RAMPS 1.4 Controller + 5 A4988 Stepper Driver with Heat Sink USB Cable Jumper Kit 3D Printer Interface & Driver Modules
  • 【Boot-loader】: With the boot-loader, download the program directly via USB without having to go through other external writer
  • 【Exquisite Design】: The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion
  • 【More Additions】: Additionally, a number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack
  • 【Enough Expansion Space】: RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion
  • 【Low Cost】: The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package for low cost
Latest Ramps 3d printer controller
RAMPS Kit,RAMPS Controller Module 3D Printer RAMPS 1.4 Controller + MEGA2560 R3 + A4988 with Heat Sink USB Kit
  • 1.Small package large capacity: The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package for low cost,interfaces an Mega with the powerful MEGA platform and has plenty room for expansion.
  • 2.Modular design: The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion.
  • 3.Docking Mega platform: Mega is an ATmega2560 as core micro-controller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator.
  • 4.USB direct download: With the boot-loader, download the program directly via USB without having to go through other external writer.
  • 5.Overcurrent protection: A4988 driver is a carrier board or breakout board for Allegro's A4988 DMOS micro-stepping driver with translator and Over current Protection by Pololu.
Latest Ramps 3d printer controller
Acogedor 3D Printer Controller Kit with RAMPS 1.4 Board+Mega 2560 R3 Board+5pcs Soldered A4988 Drivers+5pcs Heat Sinks+USB Cable+19pcs Jumpers
  • The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package for low cost
  • RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion
  • The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion
  • Additionally, a number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack
  • With the boot-loader, download the program directly via USB without having to go through other external writer

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Ramps 3d printer controller could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Ramps 3d printer controller which are among the cheapest on the market. Just scroll through the list to find Ramps 3d printer controller the cheapest products.

Catalog

The product Ramps 3d printer controller can be found in the dedicated catalog where the entire list of products on sale is presented.

Ramps 3d printer controller is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Ramps 3d printer controller New
NaiCasy LCD Screen Controller Screen Display Hat LCD Controller Board Panel with Cable for 3D Printer Kit Accessory
  • This 12864 LCD intelligent screen controller is for 3D printers
  • The built-in encoder of the LCD controller board allows you to adjust the parameters and select the file to be printed
  • LCD screen display has large screen with clear white characters and blue backlight
  • Adjust and press the round button to control,the reset button with buzzer reminder for display screen controller is easy to operate
  • This display screen controller support RAMPS 1.4 control board
Ramps 3d printer controller New
luoshan New Pololu Shield Ramps-FD for Arduino Due 3D Printer Controller
  • New Pololu Shield Ramps-FD for Arduino Due 3D Printer Controller
  • Provides a higher finish quality, good coating adhesion and reliability.
  • Compact design, small size, suitable for any desk
Ramps 3d printer controller New
LISUONG JZFF AYCC New Pololu Shield Ramps-FD for Arduino Due 3D Printer Controller
  • This is a professional, brand-new, high-quality product that has received universal acclaim.
  • High-tech products, durable, suitable for 3D printers.
  • The seller provides good after-sales service and is reliable.
  • Abundant inventory and fast delivery.
  • New Pololu Shield Ramps-FD for Arduino Due 3D Printer Controller
Ramps 3d printer controller New
AITRIP LCD 2004 LCD Screen Smart Display Screen Controller Module with Cable for RAMPS 1.4 Arduino Mega Pololu Shield Arduino Reprap 3D Printer Kit Accessory
  • Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc
  • LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file via the LCD control panel
  • 2004 LCD smart controller for 3D printer,Supports for RAMPS 1.4 control board
  • This panel connect your RAMPS 1.4. 3D design print without a computer, just use the G code design stored on the SD card, SD card intelligent controller power supply. With Smart LCD Controller you can print 3D designs without USB connection to your computer
  • A LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking
Ramps 3d printer controller New
Aoicrie Ramps 1.6 Plus Expansion Control Panel with Heatsink Upgraded Ramps 1.4 3D Motherboard Support A4988 DRV8825 TMC2130 Driver Reprap Mendel for 3D Printer Board Parts
  • RAMPS 1.6 interface board with new, more powerful SMT MOSFET drivers
  • Improved heat dissipation with new heat sink,the PCB has a built-in selection terminal for driving the SPI working mode, and is compatible with STEP/DIR and SPI modes
  • The power supply and hot bed use 30A high-current terminal block, to avoid the situation of burning terminals to a greater extent
  • Added a reset expansion interface, convenient for users to extend the reset button, X, Y, Z, E0, E1 all use parallel dual motor interface, so that the board is suitable for more models
  • Design of plate pin socket can be easily replaced or removed for future design, Changed the silk screen, making the wiring clear at a glance. Using a combination of colored pin headers and mothers, effectively distinguishing each functional interface, both beautiful and practical
Ramps 3d printer controller New
MKS Gen L V2.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard 1PCS
  • ฅฅ Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable
  • ฅฅ Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly
  • ฅฅ Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS
  • ฅฅ TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently
  • ฅฅ Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces
Ramps 3d printer controller New
Tosuny LCD Screen for Creality CR-10S / S4 / S5, CR10s LCD Screen, Replacement LCD Screen Controller Display with 2 Cable for Creality CR-10S 3D Printer, 3D Printer Kit Accessory
  • Replacement LCD screen display for Creality CR-10S 3D printer.
  • Supports for RAMPS 1.4 control board.
  • Clear white characters with blue backlit.
  • Supports for selecting the files to print.
  • Comes with two connecting cables.
Ramps 3d printer controller New
KINGPRINT 3D Printer Main Board MKS Base V1.6 Integrated Motherboard Compatible Mega 2560 & 1.4 Control Board RepRap Mendel
  • Arduino MEGA compatible Atmega2560 and FT232 processors are compatible with all RAMPS class firmware.
  • Easy DISPLAY + SD-CARD connector, RepRap Discount SmartController compatible pin header on board.
  • Recoverable fuse for short-circuit protection. MKS BASE is suitable for dual-Extruder machine.
  • It features an onboard ATmega2560. Its five motor outputs are powered by A4982 stepper drivers.
  • 6x end stop connectors with power supply Xmin/Xmax/Ymin/Ymax/Zmin/Zmax.
Ramps 3d printer controller New
3D Printer Controller Kit RepRap, RAMPS 1.4 + 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display
  • 2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
  • RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an for Arduino shield for easy service, part replacement, upgrade-ability and expansion. for Additionally, a number of for Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro¡¯s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefullybefore using this product.
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered isasking for trouble.)

Where to buy?

If you are asking yourself where to buy Ramps 3d printer controller? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Ramps 3d printer controller, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Ramps 3d printer controller and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Ramps 3d printer controller may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Ramps 3d printer controller used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Ramps 3d printer controller at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

NaiCasy LCD Screen Controller Screen Display Hat LCD Controller Board Panel with Cable for 3D Printer Kit Accessory
  • This 12864 LCD intelligent screen controller is for 3D printers
  • The built-in encoder of the LCD controller board allows you to adjust the parameters and select the file to be printed
  • LCD screen display has large screen with clear white characters and blue backlight
  • Adjust and press the round button to control,the reset button with buzzer reminder for display screen controller is easy to operate
  • This display screen controller support RAMPS 1.4 control board
Aoicrie Ramps 1.6 Plus Expansion Control Panel with Heatsink Upgraded Ramps 1.4 3D Motherboard Support A4988 DRV8825 TMC2130 Driver Reprap Mendel for 3D Printer Board Parts
  • RAMPS 1.6 interface board with new, more powerful SMT MOSFET drivers
  • Improved heat dissipation with new heat sink,the PCB has a built-in selection terminal for driving the SPI working mode, and is compatible with STEP/DIR and SPI modes
  • The power supply and hot bed use 30A high-current terminal block, to avoid the situation of burning terminals to a greater extent
  • Added a reset expansion interface, convenient for users to extend the reset button, X, Y, Z, E0, E1 all use parallel dual motor interface, so that the board is suitable for more models
  • Design of plate pin socket can be easily replaced or removed for future design, Changed the silk screen, making the wiring clear at a glance. Using a combination of colored pin headers and mothers, effectively distinguishing each functional interface, both beautiful and practical
3D Printer Controller Kit RepRap, RAMPS 1.4 + 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display
  • 2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
  • RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an for Arduino shield for easy service, part replacement, upgrade-ability and expansion. for Additionally, a number of for Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro¡¯s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefullybefore using this product.
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered isasking for trouble.)
AITRIP LCD 2004 LCD Screen Smart Display Screen Controller Module with Cable for RAMPS 1.4 Arduino Mega Pololu Shield Arduino Reprap 3D Printer Kit Accessory
  • Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc
  • LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file via the LCD control panel
  • 2004 LCD smart controller for 3D printer,Supports for RAMPS 1.4 control board
  • This panel connect your RAMPS 1.4. 3D design print without a computer, just use the G code design stored on the SD card, SD card intelligent controller power supply. With Smart LCD Controller you can print 3D designs without USB connection to your computer
  • A LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking
MKS Gen L V2.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard 1PCS
  • ฅฅ Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable
  • ฅฅ Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly
  • ฅฅ Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS
  • ฅฅ TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently
  • ฅฅ Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Ramps 3d printer controller.

Rating: 3.43 of 5 - 23 votes
1 Star2 Stars3 Stars4 Stars5 Stars (23 votes, average: 3.43 out of 5)
Loading...