Online product reviews and comparisons for Rambo board 3d printer.
- All extra pins broken on both processors (lets use 32u2 for LUFA AVR programmer, etc.)
- 4 thermistor jacks
- for MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware
- Crystals for usb and mcu (exact time 10ppm)
- 2 channel SDRAMPS leak compatible SPI Motor Controllers
- PWM Outputs for (XY), Z, E0 stepper current control instead of digital trimpot,Current limit on driver IC VCC to prevent permanent latchup
- 3 Thermistor jacks,Motor Drivers,4 A4982 1/16th microstep motor drivers(2 connectors on Z for Prusa Mendel and other dual Z printer designs).
- This board is based off RAMBo, the Arduino MEGA design, and the work of RepRap community,It has 4 stepper drivers and 4 mosfet switched outputs.
- Arduino MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware Crystals for both usb and mcu (timing accurate to 10ppm).
- Microstep mode configured by MCU through firmware (no jumpers needed) Test points for driver control signals,Step and Direction pins are on their own ports for synchronous movement capability PWM DC outputs (Extruders, Fans, Etc.)
- - Arduino MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware
- - Crystals for both usb and mcu (timing accurate to 10ppm)
- - 4 Thermistor jacks
- - All extra pins broken out on both processors (allows using the 32u2 for LUFA AVR programmer, etc.)
- - 2 channel SDRAMPS compatible SPI breakout
- Arduino MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware Crystals for both usb and mcu (timing accurate to 10ppm).
- PWM Outputs for (XY), Z, E0 stepper current control instead of digital trimpot,Current limit on driver IC VCC to prevent permanent latchup
- Microstep mode configured by MCU through firmware (no jumpers needed) Test points for driver control signals,Step and Direction pins are on their own ports for synchronous movement capability PWM DC outputs (Extruders, Fans, Etc.)
- 3 Thermistor jacks,Motor Drivers,4 A4982 1/16th microstep motor drivers(2 connectors on Z for Prusa Mendel and other dual Z printer designs).
- This board is based off RAMBo, the Arduino MEGA design, and the work of RepRap community,It has 4 stepper drivers and 4 mosfet switched outputs.
- 5 x integrated 1/16th microstep motor drivers, 5 PWM Mosfet outputs, 4 thermistor inputs, digital trimpot (no tiny knobs to tweak), SMPS supports hostless printing on power supply voltages from 10-24V , 3 independent fuse protected power rails, LUFA USB, high quality connectors
- The RAMBo board is an all in one 3D printer motherboard. It is a full remix of our RAMPS design with the for MEGA and stepper drivers all on one integrated PCB. That is where it got the name RAMBo - (R)epRap (A)rduino-(M)ega-compatible (M)other (Bo)ard. This is the same board you will find in the Lulzbot Taz6 Printer
- RAMBo v1.4 - The major difference over the previous version is the integrated LCD for Smart LCD Controllers. The EXT2 and SPI headers were re-arranged to remove the need for an . This change is backwards compatible with firmware for previous versions of Rambo that normally utilize the RamboLCD.
- Logic, MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmwares,Crystals for both usb and mcu (timing accurate to 10ppm)
- 4 Thermistor jacks,All extra pins broken out on both processors (allows using the 32u2 for LUFA AVR programmer, etc.)
- 3D Printer Accessories for Reprap Mini-Rambo 1.3+2004A LCD Display,
- 4 x integrated microstep motor controllers 1/16,4 MOSFET PWM outputs,3 thermistor inputs.
- Current control of the PWM motor (without small knobs).
- SMPS supports the maintenance-free printing of 10-28 V DC power supply.
- 2 protected power fuse (heated bed, 15a 10-35 V, 10a 10-28 V primary power:
- All extra pins broken on both processors (lets use 32u2 for LUFA AVR programmer, etc.)
- Crystals for usb and mcu (exact time 10ppm)
- 4 thermistor jacks
- for MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware
- 2 channel SDRAMPS leak compatible SPI Motor Controllers
- The performance has been greatly improved, capability is more stable and better heat dissipation.
- F2: motors and on-board power supply.
- F3: extruder heater + fan outputs and logic.
- Part number: 0448005.MR.
- 2 user replaceable NANO2 fuses.
- High quality -Rambo 1.3 Control Board set. 3 thermistor inputs and pwm motor current control.
- 4 x PWM Mosfet outputs
- 4 x 1/16th microstep motor drivers
Buy Rambo board 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.
Don't miss out on the promotions for Rambo board 3d printer, buy Rambo board 3d printer directly online and enjoy big saving on your purchases.
On this page you will find the list of the best Rambo board 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).
Overview
- Reviews: Rambo board 3d printer
- Pricing: Rambo board 3d printer
- Promotions and Deals: Rambo board 3d printer
- Cost: Rambo board 3d printer
- Catalog: Rambo board 3d printer
- Where to buy: Rambo board 3d printer
- Discount Coupon: Rambo board 3d printer
- Similar Products: Rambo board 3d printer
- with 320mm lead screw (including 2mm height of step on the motor)
- Used for prusa i3 MK2 MK2S MK3 MK3S 3D printer
- stepper motor's connector is compatible with mini-Rambo, Einsy Rambo, Rambo 1.3 1.4 board
- Holding Torque: 420mN.m ; size of motor: 42x42x40mm; Step Angle: 1.8 deg.; Rated Current phase: 1.5A
- pack: 2pcs of stepper motor with lead screw; 2pcs motor cables; 2pcs nuts
- Crystals for usb and mcu (exact time 10ppm)
- 4 thermistor jacks
- All extra pins broken on both processors (lets use 32u2 for LUFA AVR programmer, etc.)
- for MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware
- There are many products in this shop, so you can choose your favorite one here. We provide you high quality products and services. If you have any questions about the product, please contact us as soon as possible.
- PWM Outputs for (XY), Z, E0 stepper current control instead of digital trimpot,Current limit on driver IC VCC to prevent permanent latchup
- 3 Thermistor jacks,Motor Drivers,4 A4982 1/16th microstep motor drivers(2 connectors on Z for Prusa Mendel and other dual Z printer designs).
- This board is based off RAMBo, the Arduino MEGA design, and the work of RepRap community,It has 4 stepper drivers and 4 mosfet switched outputs.
- Arduino MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware Crystals for both usb and mcu (timing accurate to 10ppm).
- Microstep mode configured by MCU through firmware (no jumpers needed) Test points for driver control signals,Step and Direction pins are on their own ports for synchronous movement capability PWM DC outputs (Extruders, Fans, Etc.)
- MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware Crystals for both usb and mcu (timing accurate to 10ppm).
- 3 Thermistor jacks,Motor Drivers,4 A4982 1/16th microstep motor drivers(2 connectors on Z for Prusa Mendel and other dual Z printer designs).
- Microstep mode configured by MCU through firmware (no jumpers needed) Test points for driver control signals,Step and Direction pins are on their own ports for synchronous movement capability PWM DC outputs (Extruders, Fans, Etc.)
- This board is based off RAMBo, the MEGA design, and the work of RepRap community,It has 4 stepper drivers and 4 mosfet switched outputs.
- PWM Outputs for (XY), Z, E0 stepper current control instead of digital trimpot,Current limit on driver IC VCC to prevent permanent latchup
- This board is based off RAMBo, the Arduino MEGA design, and the work of RepRap community,It has 4 stepper drivers and 4 mosfet switched outputs.
- Arduino MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware Crystals for both usb and mcu (timing accurate to 10ppm).
- 3 Thermistor jacks,Motor Drivers,4 A4982 1/16th microstep motor drivers(2 connectors on Z for Prusa Mendel and other dual Z printer designs).
- PWM Outputs for (XY), Z, E0 stepper current control instead of digital trimpot,Current limit on driver IC VCC to prevent permanent latchup
- Microstep mode configured by MCU through firmware (no jumpers needed) Test points for driver control signals,Step and Direction pins are on their own ports for synchronous movement capability PWM DC outputs (Extruders, Fans, Etc.)
Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.
We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).
We have categorized the products in order to show the most popular and best sellers.
Rambo board 3d printer
Here is the ranking of the best Rambo board 3d printer, click to see reviews, details and active promotions:
Visit our section devoted to providing consumer opinions on Rambo board 3d printer and read the reviews left by real customers, see the Rambo board 3d printer ranking and find the store where to buy at the lowest price.
Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.
- High quality -Rambo 1.3 Control Board set. 3 thermistor inputs and pwm motor current control.
- 4 x PWM Mosfet outputs
- 4 x 1/16th microstep motor drivers
- 4 x PWM Mosfet outputs
- High quality -Rambo 1.3 Control Board set. 3 thermistor inputs and pwm motor current control.
- 4 x 1/16th microstep motor drivers
- Model Number: mk3
- Item Type: Motherboard
- Compatible brands: Blurolls
- 4 thermal outlets
- Crystals for usb and mcu (exact time 10ppm)
- All additional pins are broken on both processors (allows 32u2 to be used for LUFA AVR programmer, etc.)
- for MEGA enabled Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware
- 2 SDRAMPS compatible SPI engine controllers
- Our kits include all screws and all necessary components, widely used in 3D printers, monitors / medical equipment / textiles / packaging, stage lighting, etc.
- Taiwan made IEC AC socket
- Power Fault compatible with original or cloned Einsy-Rambo board
- Fully tested before shipping
- Our shop always takes customer satisfaction as the ultimate goal. If you encounter any problems, please feel free to contact us, we will reply your questions as soon as possible, and we will send you professional courier to ensure delivery. Reach efficiency, this will be more than ten days shorter than the delivery time of Amazon, please rest assured to buy.
- - Arduino MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware
- - Crystals for both usb and mcu (timing accurate to 20ppm)
- - 4 Thermistor jacks
- - All extra pins broken out on both processors (allows using the 32u2 for LUFA AVR programmer, etc.)
- Please feel free to contact us with any questions you may have.We'll get back to you as soon as we can.
- The performance has been greatly improved, capability is more stable and better heat dissipation.
- - 4 Thermistor jacks.
- - 2 channel SDRAMPS compatible SPI breakout.
- - MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware.
- - Crystals for both usb and mcu (timing accurate to 10ppm).
- Perfect for true viewing and makeup application.
- F2: motors and on-board power supply.
- F3: extruder heater + fan outputs and logic.
- Part number: 0448005.MR.
- 2 user replaceable NANO2 fuses.
- The performance has been greatly improved, capability is more stable and better heat dissipation.
- F2: motors and on-board power supply.
- F3: extruder heater + fan outputs and logic.
- Part number: 0448005.MR.
- 2 user replaceable NANO2 fuses.
Reviews
On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Rambo board 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Rambo board 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.
- The performance has been greatly improved, capability is more stable and better heat dissipation.
- F2: motors and on-board power supply.
- F3: extruder heater + fan outputs and logic.
- Part number: 0448005.MR.
- 2 user replaceable NANO2 fuses.
- High quality -Rambo 1.3 Control Board set. 3 thermistor inputs and pwm motor current control.
- 4 x PWM Mosfet outputs
- 4 x 1/16th microstep motor drivers
- The performance has been greatly improved, capability is more stable and better heat dissipation.
- - 4 Thermistor jacks.
- - 2 channel SDRAMPS compatible SPI breakout.
- - MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware.
- - Crystals for both usb and mcu (timing accurate to 10ppm).
- Model Number: mk3
- Item Type: Motherboard
- Compatible brands: Blurolls
- 4 thermal outlets
- Crystals for usb and mcu (exact time 10ppm)
- All additional pins are broken on both processors (allows 32u2 to be used for LUFA AVR programmer, etc.)
- for MEGA enabled Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware
- 2 SDRAMPS compatible SPI engine controllers
Pricing
The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.
How can you get the best deal? Read and learn in order to select the most convenient offer.
The price is updated every day so you always know how much Rambo board 3d printer actually costs.
- All extra pins broken on both processors (lets use 32u2 for LUFA AVR programmer, etc.)
- 4 thermistor jacks
- for MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware
- Crystals for usb and mcu (exact time 10ppm)
- 2 channel SDRAMPS leak compatible SPI Motor Controllers
- PWM Outputs for (XY), Z, E0 stepper current control instead of digital trimpot,Current limit on driver IC VCC to prevent permanent latchup
- 3 Thermistor jacks,Motor Drivers,4 A4982 1/16th microstep motor drivers(2 connectors on Z for Prusa Mendel and other dual Z printer designs).
- This board is based off RAMBo, the Arduino MEGA design, and the work of RepRap community,It has 4 stepper drivers and 4 mosfet switched outputs.
- Arduino MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware Crystals for both usb and mcu (timing accurate to 10ppm).
- Microstep mode configured by MCU through firmware (no jumpers needed) Test points for driver control signals,Step and Direction pins are on their own ports for synchronous movement capability PWM DC outputs (Extruders, Fans, Etc.)
- - Arduino MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware
- - Crystals for both usb and mcu (timing accurate to 10ppm)
- - 4 Thermistor jacks
- - All extra pins broken out on both processors (allows using the 32u2 for LUFA AVR programmer, etc.)
- - 2 channel SDRAMPS compatible SPI breakout
- Arduino MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware Crystals for both usb and mcu (timing accurate to 10ppm).
- PWM Outputs for (XY), Z, E0 stepper current control instead of digital trimpot,Current limit on driver IC VCC to prevent permanent latchup
- Microstep mode configured by MCU through firmware (no jumpers needed) Test points for driver control signals,Step and Direction pins are on their own ports for synchronous movement capability PWM DC outputs (Extruders, Fans, Etc.)
- 3 Thermistor jacks,Motor Drivers,4 A4982 1/16th microstep motor drivers(2 connectors on Z for Prusa Mendel and other dual Z printer designs).
- This board is based off RAMBo, the Arduino MEGA design, and the work of RepRap community,It has 4 stepper drivers and 4 mosfet switched outputs.
- 5 x integrated 1/16th microstep motor drivers, 5 PWM Mosfet outputs, 4 thermistor inputs, digital trimpot (no tiny knobs to tweak), SMPS supports hostless printing on power supply voltages from 10-24V , 3 independent fuse protected power rails, LUFA USB, high quality connectors
- The RAMBo board is an all in one 3D printer motherboard. It is a full remix of our RAMPS design with the for MEGA and stepper drivers all on one integrated PCB. That is where it got the name RAMBo - (R)epRap (A)rduino-(M)ega-compatible (M)other (Bo)ard. This is the same board you will find in the Lulzbot Taz6 Printer
- RAMBo v1.4 - The major difference over the previous version is the integrated LCD for Smart LCD Controllers. The EXT2 and SPI headers were re-arranged to remove the need for an . This change is backwards compatible with firmware for previous versions of Rambo that normally utilize the RamboLCD.
- Logic, MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmwares,Crystals for both usb and mcu (timing accurate to 10ppm)
- 4 Thermistor jacks,All extra pins broken out on both processors (allows using the 32u2 for LUFA AVR programmer, etc.)
- 3D Printer Accessories for Reprap Mini-Rambo 1.3+2004A LCD Display,
- 4 x integrated microstep motor controllers 1/16,4 MOSFET PWM outputs,3 thermistor inputs.
- Current control of the PWM motor (without small knobs).
- SMPS supports the maintenance-free printing of 10-28 V DC power supply.
- 2 protected power fuse (heated bed, 15a 10-35 V, 10a 10-28 V primary power:
- All extra pins broken on both processors (lets use 32u2 for LUFA AVR programmer, etc.)
- Crystals for usb and mcu (exact time 10ppm)
- 4 thermistor jacks
- for MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware
- 2 channel SDRAMPS leak compatible SPI Motor Controllers
- The performance has been greatly improved, capability is more stable and better heat dissipation.
- F2: motors and on-board power supply.
- F3: extruder heater + fan outputs and logic.
- Part number: 0448005.MR.
- 2 user replaceable NANO2 fuses.
- High quality -Rambo 1.3 Control Board set. 3 thermistor inputs and pwm motor current control.
- 4 x PWM Mosfet outputs
- 4 x 1/16th microstep motor drivers
Promotions and Deals (UK)
During the year there are many promotions on products for sale online and Rambo board 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".
We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).
Cost
Below we have selected a list of Rambo board 3d printer which are among the cheapest on the market. Just scroll through the list to find Rambo board 3d printer the cheapest products.
Catalog
The product Rambo board 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.
Rambo board 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.
The online catalog is updated frequently in order to provide the latest details, product inforomation and price.
- High quality -Rambo 1.3 Control Board set. 3 thermistor inputs and pwm motor current control.
- 4 x PWM Mosfet outputs
- 4 x 1/16th microstep motor drivers
- 4 x PWM Mosfet outputs
- High quality -Rambo 1.3 Control Board set. 3 thermistor inputs and pwm motor current control.
- 4 x 1/16th microstep motor drivers
- Model Number: mk3
- Item Type: Motherboard
- Compatible brands: Blurolls
- 4 thermal outlets
- Crystals for usb and mcu (exact time 10ppm)
- All additional pins are broken on both processors (allows 32u2 to be used for LUFA AVR programmer, etc.)
- for MEGA enabled Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware
- 2 SDRAMPS compatible SPI engine controllers
- Our kits include all screws and all necessary components, widely used in 3D printers, monitors / medical equipment / textiles / packaging, stage lighting, etc.
- Taiwan made IEC AC socket
- Power Fault compatible with original or cloned Einsy-Rambo board
- Fully tested before shipping
- Our shop always takes customer satisfaction as the ultimate goal. If you encounter any problems, please feel free to contact us, we will reply your questions as soon as possible, and we will send you professional courier to ensure delivery. Reach efficiency, this will be more than ten days shorter than the delivery time of Amazon, please rest assured to buy.
- - Arduino MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware
- - Crystals for both usb and mcu (timing accurate to 20ppm)
- - 4 Thermistor jacks
- - All extra pins broken out on both processors (allows using the 32u2 for LUFA AVR programmer, etc.)
- Please feel free to contact us with any questions you may have.We'll get back to you as soon as we can.
- The performance has been greatly improved, capability is more stable and better heat dissipation.
- - 4 Thermistor jacks.
- - 2 channel SDRAMPS compatible SPI breakout.
- - MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware.
- - Crystals for both usb and mcu (timing accurate to 10ppm).
- Perfect for true viewing and makeup application.
- F2: motors and on-board power supply.
- F3: extruder heater + fan outputs and logic.
- Part number: 0448005.MR.
- 2 user replaceable NANO2 fuses.
- The performance has been greatly improved, capability is more stable and better heat dissipation.
- F2: motors and on-board power supply.
- F3: extruder heater + fan outputs and logic.
- Part number: 0448005.MR.
- 2 user replaceable NANO2 fuses.
Where to buy?
If you are asking yourself where to buy Rambo board 3d printer? Buy online or directly in a shop?
- Online The advantages of online stores are the immediate availability of Rambo board 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
- Physical Store In a physical store instead you can try the product with your own hands, you can directly see Rambo board 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.
Rambo board 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Rambo board 3d printer used.
Discounts and Coupons in the United Kingdom (UK)
If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Rambo board 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.
- The performance has been greatly improved, capability is more stable and better heat dissipation.
- F2: motors and on-board power supply.
- F3: extruder heater + fan outputs and logic.
- Part number: 0448005.MR.
- 2 user replaceable NANO2 fuses.
- High quality -Rambo 1.3 Control Board set. 3 thermistor inputs and pwm motor current control.
- 4 x PWM Mosfet outputs
- 4 x 1/16th microstep motor drivers
- The performance has been greatly improved, capability is more stable and better heat dissipation.
- - 4 Thermistor jacks.
- - 2 channel SDRAMPS compatible SPI breakout.
- - MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware.
- - Crystals for both usb and mcu (timing accurate to 10ppm).
- Model Number: mk3
- Item Type: Motherboard
- Compatible brands: Blurolls
- 4 thermal outlets
- Crystals for usb and mcu (exact time 10ppm)
- All additional pins are broken on both processors (allows 32u2 to be used for LUFA AVR programmer, etc.)
- for MEGA enabled Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware
- 2 SDRAMPS compatible SPI engine controllers
Similar Products
Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Rambo board 3d printer.