Ptfe tube 3d printer Reviews and Best Deals

Don't miss out on the promotions for Ptfe tube 3d printer, buy Ptfe tube 3d printer directly online and enjoy big saving on your purchases.

DISCOUNTLatest Ptfe tube 3d printer
Genuine Capricorn Bowden PTFE Tubing XS Series 1.2 M Teflon Tube with 1 piece PC4-M6 Quick Fitting and 1 piece PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer
  • 100% Capricorn bowden Tube - High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL.
  • High Lubricity Additives - Makes our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
  • 1.9mm ± 0.05mm Inner Diameter - Outside diameter 4mm, inside diameter 1.95 mm ± 0.05 mm which reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden system
  • Compatiblity - It was developed specifically for 1.75mm filament with an extremely precise internal diameter. When printing flexible filaments in a bowden system, the inside diameter of bowden liner is one of the critical feature for the successful print
  • Package Included - 1 piece Capricorn Bowden PTFE Tubing XS Series 1.2 meter, 1 piece PC4-M6 Quick Fitting and 1 PC4-M10 Straight Pneumatic Fitting. If you have any question, please feel free to contact us. Thank you.
Latest Ptfe tube 3d printer
SIENOC 2x 1M PTFE Teflon Tube 2mm ID 4mm OD For 1.75mm Filament 3D Printer
  • Material: PTFE
  • Temperature range: -190°C ~ 280°C
  • Used For 1.75mm Filament 3D Printer
  • Inner diameter: 2mm, Outer diameter: 4mm
  • Length: 1m , Weight: 20g,Color: White
DISCOUNTLatest Ptfe tube 3d printer
SIQUK 5 Pieces Teflon Tube Blue PTFE Tubing(1 Meters) with 10 Pieces PC4-M6 Fittings and 10 Pieces PC4-M10 Male Straight Pneumatic PTFE Tube Push Fitting Connector for 3D Printer 1.75mm Filament
  • PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm
  • Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper; PC4-M10 Fittings is made of stainless steel
  • Attention - small 3D printer accessories, please keep away from children
Latest Ptfe tube 3d printer
SIQUK 2 Pieces PTFE Teflon Tube (2 Meters) + 4 Pieces PC4-M6 Quick Fitting + 4 Pieces PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament
  • Teflon Tube: outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3; it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260℃
  • PC4-M6 fittings: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable
  • PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer
  • Installation: connecting by the outer thread of the quick fitting, easy to install
DISCOUNTLatest Ptfe tube 3d printer
SIQUK 5 Pieces Teflon Tube PTFE Tubing(1 Meter) with 10 Pieces PC4-M6 Fittings and 10 Pieces PC4-M10 Male Straight Pneumatic PTFE Tube Push Fitting Connector for 3D Printer 1.75mm Filament
  • Teflon Tube - outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3; it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260℃
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer
  • Attention - small 3D printer accessories, please keep away from children
Latest Ptfe tube 3d printer
Genuine Capricorn PTFE Bowden Tubing XS Series 2M and Tube Cutter for 3D Printer 1.75mm Filament with 3PCS PC4-M6 and 3PCS PC4-M10 Pneumatic Fitting
  • Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm ± 0.05mm internal diameter. Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
  • Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
  • High Temperature Resistance due to using only the highest quality PTFE. Capricorn XS tubing will operate at even higher temperatures than our TL.
  • PC4-M6 fittings: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable. PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion.
DISCOUNTLatest Ptfe tube 3d printer
3D Printer Ptfe Tube Teflon Tubing 2M Bowden 1.75mm Filament Eewolf
  • 3d printer teflon tube for 1.75mm filament
  • Outer Diameter: 4mm /Inner Diameter: 2mm
  • Withstands temperatures up to 300℃
  • Smooth surface finish, stout wall thickness deters buckling
  • Package include 2X 1M teflon tube
Latest Ptfe tube 3d printer
LUTER 4 Pieces Teflon Tube PTFE Blue Tubing (1.5m) with 4 Pieces PC4-M6 Quick Fitting and 4 Pieces PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament 
  • PTFE Teflon Tubing:Outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3;Teflon tubes are made of premium PTFE material, unique self-lubricity, surface non-viscosity, safe to use and wear resisting.Heat resistant up to 260°.
  • PC4-M6 Fittings:thread M6, inner diameter(blue end) 4mm, suitable for the tube whose outer diameter is 4mm.PC4-M6 fittings are made of copper and plastic.Heavy duty and durable.
  • PC4-M10 Fittings:thread M10, inner diameter(black end) 4mm, suitable for the tube whose outer diameter is 4mm.PC4-M10 fittings are made of stainless steel and plastic.High hardness and Anti-corrosion.
  • Easy to install and Quick to fix: Press and hold the blue or black part of the quick fitting and pull out the tube.Provide turn 360°freely and Convenient to disassemble .
  • Applicability and Compatibility:Fit for all 1.75mm PLA ABS 3D printer securely with no burrs.
Latest Ptfe tube 3d printer
SIQUK 3 Pieces Teflon Tube PTFE Blue Tubing(1.5 Meters) with 3 Pieces PC4-M6 Fittings and 3 Pieces PC4-M10 Male Straight Pneumatic PEFE Tube Push Fitting Connector for 3D Printer 1.75mm Filament
  • PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm
  • Premium material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper; PC4-M10 Fittings is made of stainless steel
  • Attention - small 3D printer accessories, please keep away from children

On this page you will find the list of the best Ptfe tube 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Ptfe tube 3d printer | Overview


DISCOUNTBest
Genuine Capricorn Bowden PTFE Tubing XS Series 1.2 M Teflon Tube with 1 piece PC4-M6 Quick Fitting and 1 piece PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer
  • 100% Capricorn bowden Tube - High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL.
  • High Lubricity Additives - Makes our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
  • 1.9mm ± 0.05mm Inner Diameter - Outside diameter 4mm, inside diameter 1.95 mm ± 0.05 mm which reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden system
  • Compatiblity - It was developed specifically for 1.75mm filament with an extremely precise internal diameter. When printing flexible filaments in a bowden system, the inside diameter of bowden liner is one of the critical feature for the successful print
  • Package Included - 1 piece Capricorn Bowden PTFE Tubing XS Series 1.2 meter, 1 piece PC4-M6 Quick Fitting and 1 PC4-M10 Straight Pneumatic Fitting. If you have any question, please feel free to contact us. Thank you.
DISCOUNTBest
SIQUK 5 Pieces Teflon Tube Blue PTFE Tubing(1 Meters) with 10 Pieces PC4-M6 Fittings and 10 Pieces PC4-M10 Male Straight Pneumatic PTFE Tube Push Fitting Connector for 3D Printer 1.75mm Filament
  • PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm
  • Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper; PC4-M10 Fittings is made of stainless steel
  • Attention - small 3D printer accessories, please keep away from children
Best
SIENOC 2x 1M PTFE Teflon Tube 2mm ID 4mm OD For 1.75mm Filament 3D Printer
  • Material: PTFE
  • Temperature range: -190°C ~ 280°C
  • Used For 1.75mm Filament 3D Printer
  • Inner diameter: 2mm, Outer diameter: 4mm
  • Length: 1m , Weight: 20g,Color: White
Best
Genuine Capricorn PTFE Bowden Tubing XS Series 2M and Tube Cutter for 3D Printer 1.75mm Filament with 3PCS PC4-M6 and 3PCS PC4-M10 Pneumatic Fitting
  • Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm ± 0.05mm internal diameter. Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
  • Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
  • High Temperature Resistance due to using only the highest quality PTFE. Capricorn XS tubing will operate at even higher temperatures than our TL.
  • PC4-M6 fittings: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable. PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion.
Best
SIQUK 2 Pieces PTFE Teflon Tube (2 Meters) + 4 Pieces PC4-M6 Quick Fitting + 4 Pieces PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament
  • Teflon Tube: outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3; it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260℃
  • PC4-M6 fittings: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable
  • PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer
  • Installation: connecting by the outer thread of the quick fitting, easy to install

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Best Ptfe tube 3d printer

Here is the ranking of the best Ptfe tube 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Ptfe tube 3d printer and read the reviews left by real customers, see the Ptfe tube 3d printer ranking and find the store where to buy at the lowest price.

Ptfe tube 3d printer New
Kongqiabona-UK Small tips thrush learning artifact beginner set thrush AIDS tool set handheld eyebrow stickers
  • 1. Left + Right 3D printer Makerbot Replicator MK10 full metal extruder
  • 2. Item does not contain motor not PTFE tube.
  • 3. Full metal aluminum alloy,diy aluminum block, need to assemble by yourself.
  • 4. It will also allow to print faster with sustained quality and no risk for grinding the filament.
  • 5. Our design gives complete support of flexibles from the intake and output ends.
Ptfe tube 3d printer New
#N/A 1Meter PTFE Tube For 1.75mm Filament 3D - ID2mmxOD4mm
  • Excellent corrosion resistance - Ability to withstand the effects of all strong acids (including regia), strong oxidants, reducing agents and various organic solvents other than molten alkali metal, fluorinated media and above 300 ° C sodium hydroxide
  • Excellent resistance to high and low temperature : 190 ℃ ~ 280 ℃
  • PTFE Tube For 1.75mm Filament 3D Printer RepRap Rostock
  • Hard texture, high strength, not easy to damage, is not easy to aging
  • Strong insulation resistance from environmental and frequency, up to 1018 ohm volume resistivity, small dielectric loss, high breakdown voltage
Ptfe tube 3d printer New
#N/A ID2mmx OD4mm 1M PTFE Teflon Tube For Filament 3D
  • PTFE Tube For 1.75mm Filament 3D Printer RepRap Rostock
  • Excellent resistance to high and low temperature : 190 ℃ ~ 280 ℃
  • Strong insulation resistance from environmental and frequency, up to 1018 ohm volume resistivity, small dielectric loss, high breakdown voltage
  • Hard texture, high strength, not easy to damage, is not easy to aging
  • Excellent corrosion resistance - Ability to withstand the effects of all strong acids (including regia), strong oxidants, reducing agents and various organic solvents other than molten alkali metal, fluorinated media and above 300 ° C sodium hydroxide
DISCOUNTPtfe tube 3d printer New
ULTECHNOVO Bowden PTFE Tubing Teflon Tube PTFE Blue Tubing with Male Straight Pneumatic PEFE Tube Push Fitting Connector for 3D Printer Filament PC4-M6 PC4-M10
  • Reduction of filament play Inside the Bowden tube.
  • Unique self-lubricating property: It has the smallest friction coefficient among plastics and is an ideal oil-free lubricating material.
  • Safe Up to 280℃ for printing with temperature materials.
  • High quality pneumatic fitting with internal metal teeth.
  • Reduced friction and improved heat resistance over standard PTFE tubing.
Ptfe tube 3d printer New
ACAMPTAR MK10 Hotend Kit Extruder Set with Heat Block Copper 0.4mm Nozzle Throat Tube PTFE Tube Silicone Sock Compatible with Other 3D Printer
  • 4.Equipped with 0.4 mm and 0.6 mm brass nozzles, and spanner for remove the nozzle.
  • 1.Nozzles is made of copper material, which have excellent heat conduction advantage, can ensure accurate printing temperature.
  • 3.MK10 hot-end kit with a silicone sleeve, after installation, the hot-end temperature can be maintained stable to improve printing quality.
  • 2.MK10 heating block has a M3 screw hole on both sides, which can install a threaded thermistor.
  • 5.Suitable for FlashForge Creator Pro, Creator X, Dreamer, Finder, Inventor, Idea Builder, Powerspec 3d Pro,3d X, Wanhao 4S 4xI3, Maker select plus, qidi tech, create, etc.
Ptfe tube 3d printer New
Noblik 3D Printer Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm, 0.4mm Nozzle
  • Capricorn PTFE tubing: High lubricity additives make our XS series tubing the lowest friction Bowden tubing on the market. Less friction, more responsiveness, less shrinkage, more accurate printing, non-slip, easier wear, thicker films such as some wood fillers or ironing fillers are more likely to block.
  • MK8 nozzles with different sizes: 0.2mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle
  • MK8 Extruder Hot End Kit, white wire for temperature, red wire for heating tube 24V 40W
  • Upgraded Extruder MK8 High-end Kit with Capricorner Polytetragonal Tube
  • For Creality ender 3 / ender 3 Pro
Ptfe tube 3d printer New
Creality Capricorn Bowden PTFE Tubing 1 Meter Tube Cutter XS Series 1.75MM Filament for Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S 3D Printer
  • 100% Original Capricorn XS Serious tubing Original.
  • High Lubricity Additives make XS Series tubing the lowest friction bowden tubing on the market. More responsiveness, accurate prints,less retraction,slippage, wear, and tear on the extruder,which make the Capricorn tubing advanced in all series.
  • Lower retraction will save you more time while the extruder retracts in printing.
  • 1.9mm ± 0.05mm Inner Diameter Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.
  • Advanced material of Capricorn XS Series can make it resist higher temperature, Capricorn XS tubing will operate at even higher temperatures than our TL.
Ptfe tube 3d printer New
Creality Upgraded 3D Printer Accessories with Capricorn PTFE Tubing and Metal MK8 Bowden Extruder and 4 pcs Heated Bed Leveling Die Springs for Ender 3/3 Pro, Ender 5/5 Plus/Pro, CR-10, CR-10S/10S Pro
  • Creality Upgraded Kits for 3D printers Ender 3 / Ender 3 Pro / Ender 5 / CR10 / CR10S / S5. Quickly and easily improve the performance and reliability of 3D printers.
  • Upgraded metal MK-8 extruder drive feeder that makes filament loading easier and smoother without worrying about scraping or breaking the filament.
  • Capricorn Bowden PTFE tube XS series 1 meter for 1.75 mm filament, ID 1.9 mm and OD 4 mm. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, extruder wear and less clogging when printing bulky filaments like some wood or iron fillings.
  • The compression springs are stiffer than normal springs, which makes your 3D printer much more stable when printing
  • Professional customer support - If you have any problems or questions about the product, please feel free to contact us. We will respond within 24 hours and offer professional technical support.
Ptfe tube 3d printer New
Creality Upgrade 24V 40W MK8 Hot End Kit with Capricorn Premium Tubing for Ender 3/ Ender 3 Pro 3D Printer
  • Upgrade Ender 3 hotend kit -This Ender 3 hotend kit uses Capricorn premium bowden tube to replace the ordilary white bowden tubing to get a better performance.
  • The Capricorn Premium Bowden PTFE Tubing has a lower retraction and higher temperature resistance. It was developed specifically for 1.75mm filament with an extremely precise internal diameter.
  • Creality assembled hotend kit for Ender 3 and Ender 3 Pro 3D printer is very easy to install and remove. You can change the nozzles easily according to your need.
  • White wire is temperature thermistor, red wire is heating tube 24V 40W. Perfect replacement accessories/parts for Creality Ender 3/ Ender 3 Pro 3D printer.
  • Professional Customer Support: If you have any questions during the using process, just feel free to contact us, and we will solve in 24 hours.

Ptfe tube 3d printer | Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Ptfe tube 3d printer.

Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know.

Users who release reviews on Ptfe tube 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product.

The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs.

Creality Capricorn Bowden PTFE Tubing 1 Meter Tube Cutter XS Series 1.75MM Filament for Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S 3D Printer
  • 100% Original Capricorn XS Serious tubing Original.
  • High Lubricity Additives make XS Series tubing the lowest friction bowden tubing on the market. More responsiveness, accurate prints,less retraction,slippage, wear, and tear on the extruder,which make the Capricorn tubing advanced in all series.
  • Lower retraction will save you more time while the extruder retracts in printing.
  • 1.9mm ± 0.05mm Inner Diameter Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.
  • Advanced material of Capricorn XS Series can make it resist higher temperature, Capricorn XS tubing will operate at even higher temperatures than our TL.
Creality Upgraded 3D Printer Accessories with Capricorn PTFE Tubing and Metal MK8 Bowden Extruder and 4 pcs Heated Bed Leveling Die Springs for Ender 3/3 Pro, Ender 5/5 Plus/Pro, CR-10, CR-10S/10S Pro
  • Creality Upgraded Kits for 3D printers Ender 3 / Ender 3 Pro / Ender 5 / CR10 / CR10S / S5. Quickly and easily improve the performance and reliability of 3D printers.
  • Upgraded metal MK-8 extruder drive feeder that makes filament loading easier and smoother without worrying about scraping or breaking the filament.
  • Capricorn Bowden PTFE tube XS series 1 meter for 1.75 mm filament, ID 1.9 mm and OD 4 mm. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, extruder wear and less clogging when printing bulky filaments like some wood or iron fillings.
  • The compression springs are stiffer than normal springs, which makes your 3D printer much more stable when printing
  • Professional customer support - If you have any problems or questions about the product, please feel free to contact us. We will respond within 24 hours and offer professional technical support.
#N/A ID2mmx OD4mm 1M PTFE Teflon Tube For Filament 3D
  • PTFE Tube For 1.75mm Filament 3D Printer RepRap Rostock
  • Excellent resistance to high and low temperature : 190 ℃ ~ 280 ℃
  • Strong insulation resistance from environmental and frequency, up to 1018 ohm volume resistivity, small dielectric loss, high breakdown voltage
  • Hard texture, high strength, not easy to damage, is not easy to aging
  • Excellent corrosion resistance - Ability to withstand the effects of all strong acids (including regia), strong oxidants, reducing agents and various organic solvents other than molten alkali metal, fluorinated media and above 300 ° C sodium hydroxide
#N/A 1Meter PTFE Tube For 1.75mm Filament 3D - ID2mmxOD4mm
  • Excellent corrosion resistance - Ability to withstand the effects of all strong acids (including regia), strong oxidants, reducing agents and various organic solvents other than molten alkali metal, fluorinated media and above 300 ° C sodium hydroxide
  • Excellent resistance to high and low temperature : 190 ℃ ~ 280 ℃
  • PTFE Tube For 1.75mm Filament 3D Printer RepRap Rostock
  • Hard texture, high strength, not easy to damage, is not easy to aging
  • Strong insulation resistance from environmental and frequency, up to 1018 ohm volume resistivity, small dielectric loss, high breakdown voltage
Creality Upgrade 24V 40W MK8 Hot End Kit with Capricorn Premium Tubing for Ender 3/ Ender 3 Pro 3D Printer
  • Upgrade Ender 3 hotend kit -This Ender 3 hotend kit uses Capricorn premium bowden tube to replace the ordilary white bowden tubing to get a better performance.
  • The Capricorn Premium Bowden PTFE Tubing has a lower retraction and higher temperature resistance. It was developed specifically for 1.75mm filament with an extremely precise internal diameter.
  • Creality assembled hotend kit for Ender 3 and Ender 3 Pro 3D printer is very easy to install and remove. You can change the nozzles easily according to your need.
  • White wire is temperature thermistor, red wire is heating tube 24V 40W. Perfect replacement accessories/parts for Creality Ender 3/ Ender 3 Pro 3D printer.
  • Professional Customer Support: If you have any questions during the using process, just feel free to contact us, and we will solve in 24 hours.

Ptfe tube 3d printer | Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

DISCOUNTLatest Ptfe tube 3d printer
Genuine Capricorn Bowden PTFE Tubing XS Series 1.2 M Teflon Tube with 1 piece PC4-M6 Quick Fitting and 1 piece PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer
  • 100% Capricorn bowden Tube - High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL.
  • High Lubricity Additives - Makes our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
  • 1.9mm ± 0.05mm Inner Diameter - Outside diameter 4mm, inside diameter 1.95 mm ± 0.05 mm which reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden system
  • Compatiblity - It was developed specifically for 1.75mm filament with an extremely precise internal diameter. When printing flexible filaments in a bowden system, the inside diameter of bowden liner is one of the critical feature for the successful print
  • Package Included - 1 piece Capricorn Bowden PTFE Tubing XS Series 1.2 meter, 1 piece PC4-M6 Quick Fitting and 1 PC4-M10 Straight Pneumatic Fitting. If you have any question, please feel free to contact us. Thank you.
Latest Ptfe tube 3d printer
SIENOC 2x 1M PTFE Teflon Tube 2mm ID 4mm OD For 1.75mm Filament 3D Printer
  • Material: PTFE
  • Temperature range: -190°C ~ 280°C
  • Used For 1.75mm Filament 3D Printer
  • Inner diameter: 2mm, Outer diameter: 4mm
  • Length: 1m , Weight: 20g,Color: White
DISCOUNTLatest Ptfe tube 3d printer
SIQUK 5 Pieces Teflon Tube Blue PTFE Tubing(1 Meters) with 10 Pieces PC4-M6 Fittings and 10 Pieces PC4-M10 Male Straight Pneumatic PTFE Tube Push Fitting Connector for 3D Printer 1.75mm Filament
  • PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm
  • Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper; PC4-M10 Fittings is made of stainless steel
  • Attention - small 3D printer accessories, please keep away from children
Latest Ptfe tube 3d printer
SIQUK 2 Pieces PTFE Teflon Tube (2 Meters) + 4 Pieces PC4-M6 Quick Fitting + 4 Pieces PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament
  • Teflon Tube: outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3; it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260℃
  • PC4-M6 fittings: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable
  • PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer
  • Installation: connecting by the outer thread of the quick fitting, easy to install
DISCOUNTLatest Ptfe tube 3d printer
SIQUK 5 Pieces Teflon Tube PTFE Tubing(1 Meter) with 10 Pieces PC4-M6 Fittings and 10 Pieces PC4-M10 Male Straight Pneumatic PTFE Tube Push Fitting Connector for 3D Printer 1.75mm Filament
  • Teflon Tube - outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3; it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260℃
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer
  • Attention - small 3D printer accessories, please keep away from children
Latest Ptfe tube 3d printer
Genuine Capricorn PTFE Bowden Tubing XS Series 2M and Tube Cutter for 3D Printer 1.75mm Filament with 3PCS PC4-M6 and 3PCS PC4-M10 Pneumatic Fitting
  • Genuine Capricorn Premium XS bowden Tubing is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm ± 0.05mm internal diameter. Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.
  • High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
  • Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
  • High Temperature Resistance due to using only the highest quality PTFE. Capricorn XS tubing will operate at even higher temperatures than our TL.
  • PC4-M6 fittings: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable. PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion.
DISCOUNTLatest Ptfe tube 3d printer
3D Printer Ptfe Tube Teflon Tubing 2M Bowden 1.75mm Filament Eewolf
  • 3d printer teflon tube for 1.75mm filament
  • Outer Diameter: 4mm /Inner Diameter: 2mm
  • Withstands temperatures up to 300℃
  • Smooth surface finish, stout wall thickness deters buckling
  • Package include 2X 1M teflon tube
Latest Ptfe tube 3d printer
LUTER 4 Pieces Teflon Tube PTFE Blue Tubing (1.5m) with 4 Pieces PC4-M6 Quick Fitting and 4 Pieces PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament 
  • PTFE Teflon Tubing:Outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3;Teflon tubes are made of premium PTFE material, unique self-lubricity, surface non-viscosity, safe to use and wear resisting.Heat resistant up to 260°.
  • PC4-M6 Fittings:thread M6, inner diameter(blue end) 4mm, suitable for the tube whose outer diameter is 4mm.PC4-M6 fittings are made of copper and plastic.Heavy duty and durable.
  • PC4-M10 Fittings:thread M10, inner diameter(black end) 4mm, suitable for the tube whose outer diameter is 4mm.PC4-M10 fittings are made of stainless steel and plastic.High hardness and Anti-corrosion.
  • Easy to install and Quick to fix: Press and hold the blue or black part of the quick fitting and pull out the tube.Provide turn 360°freely and Convenient to disassemble .
  • Applicability and Compatibility:Fit for all 1.75mm PLA ABS 3D printer securely with no burrs.
Latest Ptfe tube 3d printer
SIQUK 3 Pieces Teflon Tube PTFE Blue Tubing(1.5 Meters) with 3 Pieces PC4-M6 Fittings and 3 Pieces PC4-M10 Male Straight Pneumatic PEFE Tube Push Fitting Connector for 3D Printer 1.75mm Filament
  • PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm
  • Premium material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper; PC4-M10 Fittings is made of stainless steel
  • Attention - small 3D printer accessories, please keep away from children

Ptfe tube 3d printer | Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Ptfe tube 3d printer could be subject to big discounts.

Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Ptfe tube 3d printer | Cost

Below we have selected a list of Ptfe tube 3d printer which are among the cheapest on the market. Just scroll through the list to find Ptfe tube 3d printer the cheapest products.

Ptfe tube 3d printer | Catalog

The product Ptfe tube 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.

Ptfe tube 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

Ptfe tube 3d printer New
Kongqiabona-UK Small tips thrush learning artifact beginner set thrush AIDS tool set handheld eyebrow stickers
  • 1. Left + Right 3D printer Makerbot Replicator MK10 full metal extruder
  • 2. Item does not contain motor not PTFE tube.
  • 3. Full metal aluminum alloy,diy aluminum block, need to assemble by yourself.
  • 4. It will also allow to print faster with sustained quality and no risk for grinding the filament.
  • 5. Our design gives complete support of flexibles from the intake and output ends.
Ptfe tube 3d printer New
#N/A 1Meter PTFE Tube For 1.75mm Filament 3D - ID2mmxOD4mm
  • Excellent corrosion resistance - Ability to withstand the effects of all strong acids (including regia), strong oxidants, reducing agents and various organic solvents other than molten alkali metal, fluorinated media and above 300 ° C sodium hydroxide
  • Excellent resistance to high and low temperature : 190 ℃ ~ 280 ℃
  • PTFE Tube For 1.75mm Filament 3D Printer RepRap Rostock
  • Hard texture, high strength, not easy to damage, is not easy to aging
  • Strong insulation resistance from environmental and frequency, up to 1018 ohm volume resistivity, small dielectric loss, high breakdown voltage
Ptfe tube 3d printer New
#N/A ID2mmx OD4mm 1M PTFE Teflon Tube For Filament 3D
  • PTFE Tube For 1.75mm Filament 3D Printer RepRap Rostock
  • Excellent resistance to high and low temperature : 190 ℃ ~ 280 ℃
  • Strong insulation resistance from environmental and frequency, up to 1018 ohm volume resistivity, small dielectric loss, high breakdown voltage
  • Hard texture, high strength, not easy to damage, is not easy to aging
  • Excellent corrosion resistance - Ability to withstand the effects of all strong acids (including regia), strong oxidants, reducing agents and various organic solvents other than molten alkali metal, fluorinated media and above 300 ° C sodium hydroxide
DISCOUNTPtfe tube 3d printer New
ULTECHNOVO Bowden PTFE Tubing Teflon Tube PTFE Blue Tubing with Male Straight Pneumatic PEFE Tube Push Fitting Connector for 3D Printer Filament PC4-M6 PC4-M10
  • Reduction of filament play Inside the Bowden tube.
  • Unique self-lubricating property: It has the smallest friction coefficient among plastics and is an ideal oil-free lubricating material.
  • Safe Up to 280℃ for printing with temperature materials.
  • High quality pneumatic fitting with internal metal teeth.
  • Reduced friction and improved heat resistance over standard PTFE tubing.
Ptfe tube 3d printer New
ACAMPTAR MK10 Hotend Kit Extruder Set with Heat Block Copper 0.4mm Nozzle Throat Tube PTFE Tube Silicone Sock Compatible with Other 3D Printer
  • 4.Equipped with 0.4 mm and 0.6 mm brass nozzles, and spanner for remove the nozzle.
  • 1.Nozzles is made of copper material, which have excellent heat conduction advantage, can ensure accurate printing temperature.
  • 3.MK10 hot-end kit with a silicone sleeve, after installation, the hot-end temperature can be maintained stable to improve printing quality.
  • 2.MK10 heating block has a M3 screw hole on both sides, which can install a threaded thermistor.
  • 5.Suitable for FlashForge Creator Pro, Creator X, Dreamer, Finder, Inventor, Idea Builder, Powerspec 3d Pro,3d X, Wanhao 4S 4xI3, Maker select plus, qidi tech, create, etc.
Ptfe tube 3d printer New
Noblik 3D Printer Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm, 0.4mm Nozzle
  • Capricorn PTFE tubing: High lubricity additives make our XS series tubing the lowest friction Bowden tubing on the market. Less friction, more responsiveness, less shrinkage, more accurate printing, non-slip, easier wear, thicker films such as some wood fillers or ironing fillers are more likely to block.
  • MK8 nozzles with different sizes: 0.2mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle
  • MK8 Extruder Hot End Kit, white wire for temperature, red wire for heating tube 24V 40W
  • Upgraded Extruder MK8 High-end Kit with Capricorner Polytetragonal Tube
  • For Creality ender 3 / ender 3 Pro
Ptfe tube 3d printer New
Creality Capricorn Bowden PTFE Tubing 1 Meter Tube Cutter XS Series 1.75MM Filament for Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S 3D Printer
  • 100% Original Capricorn XS Serious tubing Original.
  • High Lubricity Additives make XS Series tubing the lowest friction bowden tubing on the market. More responsiveness, accurate prints,less retraction,slippage, wear, and tear on the extruder,which make the Capricorn tubing advanced in all series.
  • Lower retraction will save you more time while the extruder retracts in printing.
  • 1.9mm ± 0.05mm Inner Diameter Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.
  • Advanced material of Capricorn XS Series can make it resist higher temperature, Capricorn XS tubing will operate at even higher temperatures than our TL.
Ptfe tube 3d printer New
Creality Upgraded 3D Printer Accessories with Capricorn PTFE Tubing and Metal MK8 Bowden Extruder and 4 pcs Heated Bed Leveling Die Springs for Ender 3/3 Pro, Ender 5/5 Plus/Pro, CR-10, CR-10S/10S Pro
  • Creality Upgraded Kits for 3D printers Ender 3 / Ender 3 Pro / Ender 5 / CR10 / CR10S / S5. Quickly and easily improve the performance and reliability of 3D printers.
  • Upgraded metal MK-8 extruder drive feeder that makes filament loading easier and smoother without worrying about scraping or breaking the filament.
  • Capricorn Bowden PTFE tube XS series 1 meter for 1.75 mm filament, ID 1.9 mm and OD 4 mm. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, extruder wear and less clogging when printing bulky filaments like some wood or iron fillings.
  • The compression springs are stiffer than normal springs, which makes your 3D printer much more stable when printing
  • Professional customer support - If you have any problems or questions about the product, please feel free to contact us. We will respond within 24 hours and offer professional technical support.
Ptfe tube 3d printer New
Creality Upgrade 24V 40W MK8 Hot End Kit with Capricorn Premium Tubing for Ender 3/ Ender 3 Pro 3D Printer
  • Upgrade Ender 3 hotend kit -This Ender 3 hotend kit uses Capricorn premium bowden tube to replace the ordilary white bowden tubing to get a better performance.
  • The Capricorn Premium Bowden PTFE Tubing has a lower retraction and higher temperature resistance. It was developed specifically for 1.75mm filament with an extremely precise internal diameter.
  • Creality assembled hotend kit for Ender 3 and Ender 3 Pro 3D printer is very easy to install and remove. You can change the nozzles easily according to your need.
  • White wire is temperature thermistor, red wire is heating tube 24V 40W. Perfect replacement accessories/parts for Creality Ender 3/ Ender 3 Pro 3D printer.
  • Professional Customer Support: If you have any questions during the using process, just feel free to contact us, and we will solve in 24 hours.

Ptfe tube 3d printer | Where to buy?

If you are asking yourself where to buy Ptfe tube 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Ptfe tube 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Ptfe tube 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Ptfe tube 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon.

The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases.

Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Ptfe tube 3d printer used.

Ptfe tube 3d printer | Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount.

Creality Capricorn Bowden PTFE Tubing 1 Meter Tube Cutter XS Series 1.75MM Filament for Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S 3D Printer
  • 100% Original Capricorn XS Serious tubing Original.
  • High Lubricity Additives make XS Series tubing the lowest friction bowden tubing on the market. More responsiveness, accurate prints,less retraction,slippage, wear, and tear on the extruder,which make the Capricorn tubing advanced in all series.
  • Lower retraction will save you more time while the extruder retracts in printing.
  • 1.9mm ± 0.05mm Inner Diameter Reduces the "wiggle room," or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.
  • Advanced material of Capricorn XS Series can make it resist higher temperature, Capricorn XS tubing will operate at even higher temperatures than our TL.
Creality Upgraded 3D Printer Accessories with Capricorn PTFE Tubing and Metal MK8 Bowden Extruder and 4 pcs Heated Bed Leveling Die Springs for Ender 3/3 Pro, Ender 5/5 Plus/Pro, CR-10, CR-10S/10S Pro
  • Creality Upgraded Kits for 3D printers Ender 3 / Ender 3 Pro / Ender 5 / CR10 / CR10S / S5. Quickly and easily improve the performance and reliability of 3D printers.
  • Upgraded metal MK-8 extruder drive feeder that makes filament loading easier and smoother without worrying about scraping or breaking the filament.
  • Capricorn Bowden PTFE tube XS series 1 meter for 1.75 mm filament, ID 1.9 mm and OD 4 mm. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, extruder wear and less clogging when printing bulky filaments like some wood or iron fillings.
  • The compression springs are stiffer than normal springs, which makes your 3D printer much more stable when printing
  • Professional customer support - If you have any problems or questions about the product, please feel free to contact us. We will respond within 24 hours and offer professional technical support.
#N/A ID2mmx OD4mm 1M PTFE Teflon Tube For Filament 3D
  • PTFE Tube For 1.75mm Filament 3D Printer RepRap Rostock
  • Excellent resistance to high and low temperature : 190 ℃ ~ 280 ℃
  • Strong insulation resistance from environmental and frequency, up to 1018 ohm volume resistivity, small dielectric loss, high breakdown voltage
  • Hard texture, high strength, not easy to damage, is not easy to aging
  • Excellent corrosion resistance - Ability to withstand the effects of all strong acids (including regia), strong oxidants, reducing agents and various organic solvents other than molten alkali metal, fluorinated media and above 300 ° C sodium hydroxide
#N/A 1Meter PTFE Tube For 1.75mm Filament 3D - ID2mmxOD4mm
  • Excellent corrosion resistance - Ability to withstand the effects of all strong acids (including regia), strong oxidants, reducing agents and various organic solvents other than molten alkali metal, fluorinated media and above 300 ° C sodium hydroxide
  • Excellent resistance to high and low temperature : 190 ℃ ~ 280 ℃
  • PTFE Tube For 1.75mm Filament 3D Printer RepRap Rostock
  • Hard texture, high strength, not easy to damage, is not easy to aging
  • Strong insulation resistance from environmental and frequency, up to 1018 ohm volume resistivity, small dielectric loss, high breakdown voltage
Creality Upgrade 24V 40W MK8 Hot End Kit with Capricorn Premium Tubing for Ender 3/ Ender 3 Pro 3D Printer
  • Upgrade Ender 3 hotend kit -This Ender 3 hotend kit uses Capricorn premium bowden tube to replace the ordilary white bowden tubing to get a better performance.
  • The Capricorn Premium Bowden PTFE Tubing has a lower retraction and higher temperature resistance. It was developed specifically for 1.75mm filament with an extremely precise internal diameter.
  • Creality assembled hotend kit for Ender 3 and Ender 3 Pro 3D printer is very easy to install and remove. You can change the nozzles easily according to your need.
  • White wire is temperature thermistor, red wire is heating tube 24V 40W. Perfect replacement accessories/parts for Creality Ender 3/ Ender 3 Pro 3D printer.
  • Professional Customer Support: If you have any questions during the using process, just feel free to contact us, and we will solve in 24 hours.

Ptfe tube 3d printer | Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits.

By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Ptfe tube 3d printer.

Rating: 3.63 of 5 - 30 votes
1 Star2 Stars3 Stars4 Stars5 Stars (30 votes, average: 3.63 out of 5)
Loading...

Best Deals

Mooz 3d printer Reviews and Best Deals


Sls 3d printer for sale Reviews and Best Deals


Jgaurora 3d printer a5 Reviews and Best Deals