Prometheus 3d printer Reviews and Best Deals

Online product reviews and comparisons for Prometheus 3d printer.

Latest Prometheus 3d printer
Tresbro Assembled MK8 Extruder Hot End Kit Original Replacement Parts for Creality CR-10 3D Printer, 1.75mm Filament, 0.4mm Nozzle,12V 40W
  • All accessories of this extruder hotend kit is original and high quality from Creality.100% quality gurantee.
  • Work with different sizes of MK8 nozzles: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzles.There are total 6pcs 0.4mm brass nozzles in our package.
  • MK8 Extruder Hot End kit white wire was temperature thermistor, red wire was heating tube 12V 40W.
  • Excluded the assembled MK8 hotend kit,we prepared 3pcs silicone socks and 5pcs 0.4mm brass nozzle for replacement.It's always practice to have spare parts readily available because failures normally occur when you can least accept them and at a time where there is normally a holiday of sorts to make replacement and/or repair even more inaccessible.
  • More stabel temperature.The extruder hot end kit uses non-stick silicone sock instead of the cotton isolation. These silicone sleeves can keep the print head stay clean and prevent the filament from sticking to the heater block or spout.Can offer a huge boost in temperature stability, especially if you use high flow of cooling air around the nozzle to cool the print.
Latest Prometheus 3d printer
ANYCUBIC 3D Printer Mega S All Metal Frame and Updated Extruder, FDM DIY Printer Works, Free Test Filament with TPU/PLA/ABS Printing Size 210x210x205mm
  • Qucik Assembly: 3 steps to set up/assembled the printer with fix 8 screws within minutes not only to an expert user but also to beginner
  • Powerful Extruder: Anycubic mega s updated extruder greatly reduces the risk of clogged nozzle and bad extrusion to provide a better printing experience of flexible
  • Filament Sensor: Automatic printing pause when filament runs out, resume after filament re-load with just one click
  • Ultrabase Platform: 3D printer platform is covered a layer of patented microporous to provide excellent adhesion. And easy to take off the model from the platform after it cool down
  • Suspended Filament Rack: 3D fdm printer One-piece hanging design makes the feeding of filament more smoother, save space and more convenient
Latest Prometheus 3d printer
Creality Ender 3 3D Printer, Aluminum DIY Fully Open Source with Resume Printing Function 220x220x250mm
  • E Axis working: The E axis motor will start work when the nozzle temperature reaches over 185℃, then before starting printing, please remember to heat the nozzle temperature first.
  • Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs can be assembled in just 2 hours.
  • Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
  • Strict Test: Strict testing for key components before delivery and life-time technical supports available.
  • Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110℃.
Latest Prometheus 3d printer
Comgrow Creality 3D Ender 3 Pro 3D Printer with Cmagnet Build Plateform Surface Meanwell Power Supply Unit 220x220x250mm Print Size
  • Cmagnet Build Surface Plate: Flat surface for 3D printer, flat, protects the surface. The print models can be easily removed after cooling.
  • Meanwell Power Supply Unit: Ender 3 Pro with a UL-certified power supply, protects your printer from inexact power supply and can be heated up to 110 ° C in just 5 minutes.
  • 40x40 Y Axis Profile: Ender 3 Pro adopt 40x40 Y axis profile, this would be helpful to make the hot bed more stable. Then make the quallity of the print model better.
  • Semi Assebled Kit: Multiple Pieces Assembled This easy-to-set-up kit comes partially assembled so that once you assemble it, you can learn more about the basic setup of 3D printers. An entertaining STEM training in mechanical engineering and electronics.
  • WHAT CAN WE DO: As an authorized dealer of Creality 3D, we can offer you 100% original products. And can also offer you professional after-sales service.
DISCOUNTLatest Prometheus 3d printer
Official Creality CR-6 SE Leveling-free 3D Printer(Non-Kickstarter Version)with 32 Bit Silent Motherboard, Auto Bed leveling, Upgraded Extruder Build Volumn 235x235x250MM
  • 【Innovative Leveling-free Tech】 Featuring an innovative leveling-free device which is designed with a smart pressure sensor to truly achieve hassle-free and intelligently automatic platform leveling, greatly improving bed adhesion and print quality. CR-6 SE is factory pre-leveled and replace the leveling nuts on the Ender 3/CR-10, making the printing much easier.
  • 【Modularized Nozzle】 The CR-6 SE 3D printer includes a modularized nozzle for encouraging ease in nozzle maintenance and tinkering, which allows users to replace and substitute components with ease. The heat sink, heat block, teflon tube, and hotend are all deconstructable. A set of powerful cooling fans enables superior control over filament extrusion and retraction. The hotend also houses an filament runout sensor to pause prints when required.
  • 【Upgraded Dependable Extruder】 With its compact and reliable extruder, you know that a smoother extrusion and an easier filament feed will ultimately generate faster, quieter and smoother prints. Yes, this is what perfect 3D printing is all about! the new extruder design makes loading the filament quick and painless.
  • 【Silent Motherboard with Trinamic Driver】 A silent chipset is added to the CR-6 SE. Its latest trinamic driver 2208 helps to ensure that voltage control, fast movement, and printing in silence are a given. Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10.
  • 【Easy Assemble】 In comparison to an Ender 3, CR-6 SE comes almost assembled. You only need to spend 5 minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
Latest Prometheus 3d printer
ERYONE Metal Silk Rainbow, PLA Filament 1.75mm, Filament PLA for 3D Printer 1kg /Spool
  • Like silk, it retains the shiny silky smooth appearance of the foundation and adds an extra metallic luster to it
  • PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
  • 1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
  • The fixed color scheme makes it clearer when thinking about color of the prints. Purple--red copper--green--sand yellow--purple blue--ice blue--bronze--orange--rose red--light purple
Latest Prometheus 3d printer
Comgrow Creality Ender-3 3D Printer Aluminum DIY with Resume Print 220x220x250mm Print Size
  • E Axis working: The E axis motor will start work when the nozzle temperature reaches over 185℃, then before starting printing, please remember to heat the nozzle temperature first.
  • Easy and quick assembly: It is assembled with a few parts, 20 screws can be assembled in just 2 hours.
  • Extrusion reduces the risk of clogging and poor displacement; V-shape with POM wheels make moving noiseless, smooth and constant.
  • Strict test: 24 hours for key components before delivery and real-time technical support. Secure power supply guaranteed. Culture medium reaches 110 ℃ in just 5 minutes.
  • Note: As an authorized manufacturer, we, Comgrow, offer you 100% Creality 3 printers as well as technical support.
Latest Prometheus 3d printer
ANYCUBIC Photon Mono X 3D Printer, UV LCD Resin Printer with 8.9" 4K Monochrome Screen, WiFi Control and Fast Printing, Printing Size 192mmx120mmx250mm / 7.55inx4.72inx9.84in
  • 4K Monochrome Screen: ANYCUBIC Photon Mono X is a new UV Photocuring 3D resin printer with ultra-high resolution (3840*2400 pixels), highly restored details, and the screen service life is up to 2000h, more durable than ordinary color screen
  • 3X Faster Printing: single-layer exposure only takes 1-2 seconds, and the printing speed is Max 60mm/h, which is 3 times faster than ordinary resin printers. Do you want to finish printing faster? This printer help you to obtain higher quality models in a shorter time.
  • APP Remote Control & Large Printing Volume: Use this Mono X UV Photocuring LCD 3D Printer to realize remote printing management anytime and anywhere, monitor printing progress in real time, and adjust printing parameters at any time. In order to achieve the creation needs of larger models, it has a surprising printing volume, and printing volume size 192 * 120 * 250mm.
  • Double Linear Guide: Z-axis adopts the combination of double linear guide + screw motor + anti-backlash nut, improve the stability of Z-axis, run more stable, and eliminate printing layer lines. Independently researched and developed Anycubic slicing software, which is more powerful, supports 8 times anti-aliasing and smoother printing accuracy.
  • New Matrix UV Light Source: Using quartz lamp beads, a new generation of new matrix design, the light source is more uniform, and it can be used with 4K monochrome screen to achieve high-precision printing. The resin 3D printer contains exclusive UV heat dissipation channels, which can efficiently cool down, improve printing quality and service life, and reduce maintenance costs.
Latest Prometheus 3d printer
Comgrow Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 pro/Ender 5 3D Printer 235X235mm
  • ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
  • EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
  • CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
  • SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
  • UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.

Buy Prometheus 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Prometheus 3d printer, buy Prometheus 3d printer directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Prometheus 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


Best
Creality CR-10 3D Printer DIY 300 * 300 * 400mm Print Size Supports PLA/ABS/TPU/Copper/Wood/Carbon Fiber Filament UK Plug
  • 【Large Printing Size】Professional-level print size. You can print any thing you want. Large printing size with competitive price. Patented MK10 nozzle extrusion structure can print almost all printing materials. Comes with 200g filament (PLA) for testing.
  • 【High-precision Printing Technology】Patented V-slot bearing (made of imported aluminum material)& high precision roller, make it run smoothly, print faster and get higher quality products, which can meet industrial needs.
  • 【Easy Installation & High Endurance】Just 10 minutes needed to self-assembly, solve the problem of high freight. Industrial-grade PCB can continuously print for 200 hours with mature printing technology and stable performance.
  • 【DIY】Electronic control host was separated from the printing body, in order to meet the needs of refitting printing size to various specifications according to your imagination.
  • 【High Quality Assurance】Each 3D printer is subject to strict quality control and has passed the EMC, ISO, FCC, RoHS. Support for 180-day warranty replacement parts. Provide the best service to every 3D printer enthusiast.
Best
Comgrow BL Touch Version 3.1 Auto-Leveling for Creality 3D Printer Ender 3 / Ender 3 Pro/Emder-5
  • BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
  • BLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensor. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release & Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.
  • Self-test : The push pin operate two times in a test when the power is on.
  • Alarm : The LED light blinks if a problem was found on a self-test or during operation.
  • Wiring defect indicator : Blue and Red LED for indicating wiring defects.
Best
Tresbro Assembled MK8 Extruder Hot End Kit Original Replacement Parts for Creality CR-10 3D Printer, 1.75mm Filament, 0.4mm Nozzle,12V 40W
  • All accessories of this extruder hotend kit is original and high quality from Creality.100% quality gurantee.
  • Work with different sizes of MK8 nozzles: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzles.There are total 6pcs 0.4mm brass nozzles in our package.
  • MK8 Extruder Hot End kit white wire was temperature thermistor, red wire was heating tube 12V 40W.
  • Excluded the assembled MK8 hotend kit,we prepared 3pcs silicone socks and 5pcs 0.4mm brass nozzle for replacement.It's always practice to have spare parts readily available because failures normally occur when you can least accept them and at a time where there is normally a holiday of sorts to make replacement and/or repair even more inaccessible.
  • More stabel temperature.The extruder hot end kit uses non-stick silicone sock instead of the cotton isolation. These silicone sleeves can keep the print head stay clean and prevent the filament from sticking to the heater block or spout.Can offer a huge boost in temperature stability, especially if you use high flow of cooling air around the nozzle to cool the print.
Best
Best
L.J.JZDY 3D Printer 3D Printer CR-10 V3 With BL Touch Auto-Level Touch Screen Large Build Volume 3D Printer 300mmx300mmx400mm With Capricorn PTFE 2020 Newest Printer
  • We guarantee that our products are 100% brand new.Easy to install, easy to use at home.
  • Strong Compatibility Auto & Manual Leveling:BL touch (Auto Leveling Device) can be added by yourself,enjoying more fun of DIY your own 3d printer.
  • Dual Port Fan Cooling Plenum:Dual-port cooling fan extruder, Evenly heat- dissipated and coaling dawn immediately. reducing plugging and poor- spillage ensures models with high quality.
  • A New Tough All Metal Frame: High quality V Profile selected, more stable without any vibration,smoothly printed-out with high accuracy.
  • Upgraded Ultra Silent Mother Board: Self-developed Industrial-grade Motherboard and TMC2208 Utra Silent Drive are adopted /Cost-effective /Running more stable/ Noise reduction /Compression resistance.

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Prometheus 3d printer

Here is the ranking of the best Prometheus 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Prometheus 3d printer and read the reviews left by real customers, see the Prometheus 3d printer ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Prometheus 3d printer New
ERYONE Metal Silk Rainbow, PLA Filament 1.75mm, Filament PLA for 3D Printer 1kg /Spool
  • Like silk, it retains the shiny silky smooth appearance of the foundation and adds an extra metallic luster to it
  • PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
  • 1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
  • The fixed color scheme makes it clearer when thinking about color of the prints. Purple--red copper--green--sand yellow--purple blue--ice blue--bronze--orange--rose red--light purple
Prometheus 3d printer New
Dual Z Axis Upgrade Kit, Upgraded 3D Printer Upgrade Kit, for Creality Ender 3S/Ender‑3 Pro 3D Printer Kit for Printer
  • Small, light in weight, easy to install, bring you more convenience, and improving good experience.
  • With other accessories, you don't need to spend money to buy it, which provides more convenience for installation.
  • Upgraded dual z structure, provides smooth operation, and better performance.
  • High‑quality accessories, using all‑aluminum coupling and original 42 stepper motor, stable operation.
  • Made of high‑quality metal material, hard, wear‑resistant and longer service life.
Prometheus 3d printer New
Creality Ender 3 Max 3D Printer with Silent Motherboard, Meanwell Power Supply, Tempered Carborundum Glass Plate, Large Print Size 300x300x340mm
  • Meanwell Power Supply: Ender 3 Max comes with UL Certified power supply which with a stable output ensuring the temperature fluctuations are minimized and protecting your printer from unexpected power surges. It can heat the hot bed to 110¡æ in around 10 minutes.
  • Silent Motherboard: Backed by TMC2208 silent driver, reduce noise and wobbling during printing, smoother motion and quieter printing process.; BL touch installation also is available(not included in package, you can buy one if you need. Please flash firmware first if you use a BLTouch).
  • Tempered Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.
  • All Metal Extruder, Filament End Sensor, Dual Cooling Fans in Hot End Kit 2 Sides : promotes better printing result, prevent filament wasting and reduces filament blockage.
  • Customer Services and Warranty: All of our products come with a 12 Months limited replacement part and lifetime technical support.We provide original part for after sale.more than 20 engineers provide professional customer service. Please kindly contact us(seller) via ¡°ask a question¡± find us directly if you have any issue.
Prometheus 3d printer New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
DISCOUNTPrometheus 3d printer New
Official Creality CR-6 SE Leveling-free 3D Printer(Non-Kickstarter Version)with 32 Bit Silent Motherboard, Auto Bed leveling, Upgraded Extruder Build Volumn 235x235x250MM
  • 【Innovative Leveling-free Tech】 Featuring an innovative leveling-free device which is designed with a smart pressure sensor to truly achieve hassle-free and intelligently automatic platform leveling, greatly improving bed adhesion and print quality. CR-6 SE is factory pre-leveled and replace the leveling nuts on the Ender 3/CR-10, making the printing much easier.
  • 【Modularized Nozzle】 The CR-6 SE 3D printer includes a modularized nozzle for encouraging ease in nozzle maintenance and tinkering, which allows users to replace and substitute components with ease. The heat sink, heat block, teflon tube, and hotend are all deconstructable. A set of powerful cooling fans enables superior control over filament extrusion and retraction. The hotend also houses an filament runout sensor to pause prints when required.
  • 【Upgraded Dependable Extruder】 With its compact and reliable extruder, you know that a smoother extrusion and an easier filament feed will ultimately generate faster, quieter and smoother prints. Yes, this is what perfect 3D printing is all about! the new extruder design makes loading the filament quick and painless.
  • 【Silent Motherboard with Trinamic Driver】 A silent chipset is added to the CR-6 SE. Its latest trinamic driver 2208 helps to ensure that voltage control, fast movement, and printing in silence are a given. Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10.
  • 【Easy Assemble】 In comparison to an Ender 3, CR-6 SE comes almost assembled. You only need to spend 5 minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
Prometheus 3d printer New
High Accuracy Power Supply 3D Printing Machine Huge Build Volume 3D Printer for 3D Printer with Upgraded Nozzle(British regulatory)
  • Complete accessories, simple and convenient to install
  • The printing range is 300x300x400mm, enough to operate
  • Made of excellent materials, with long working life
  • Accurate printing, excellent design structure, more suitable for long-time printing
  • High quality and great processing, which has high efficiency
Prometheus 3d printer New
3D Printer Independent Dual Extruder 3D Printer High Accuracy Huge Build Volume 300x300x400mm AC115-240V 350W with Oversized Upgraded Nozzle(UK Plug)
  • 【EXCELLENT PERFORMANCE】Our worm gear reducer motors are made of excellent materials, fall resistant, wear-resistant, durable, long service life, we guarantee the product quality and everyone's experience in the process of use
  • 【LONG SERVICE LIFE】Our 3D printers are all made of excellent materials. They are strictly controlled in the manufacturing process and guaranteed in quality. Therefore, they have a long working life and can save more time and money
  • 【HIGH COST PERFORMANCE】The price of our printer is more affordable. Compared with other printers, our quality is better and the price is more favorable. We strictly control all aspects, so we have high cost performance
  • 【SPECIFICATION】Voltage: AC115v-240v, Printing Range: 300 x 300 x 400mm, Printing Thick Bottom: 0.1-0.4mm, Printing Accuracy: ±0.1mm, Nozzle Diameter: 0.2-0.8mm, Power: 350w, Hot Bed Temperature: ≤110℃, Nozzle Temperature: ≤260℃, Printing Speed: ≤180mm/s, Normal Printing Speed: 30-60mm/s
  • 【LOW NOISE】With high-quality design, the nozzle can slide smoothly when working, with low noise, high efficiency, good use experience, and simple structure, good operation, not difficult, suitable for most scenes
Prometheus 3d printer New
SHENLIJUAN 3D Printer CR-10 V3 With BL Touch Auto-Level Touch Screen Large Build Volume 3D Printer 300mmx300mmx400mm With Capricorn PTFE 2020 Newest Printer
  • Strong Compatibility Auto & Manual Leveling:BL touch (Auto Leveling Device) can be added by yourself,enjoying more fun of DIY your own 3d printer.
  • Dual Port Fan Cooling Plenum:Dual-port cooling fan extruder, Evenly heat- dissipated and coaling dawn immediately. reducing plugging and poor- spillage ensures models with high quality.
  • A New Tough All Metal Frame: High quality V Profile selected, more stable without any vibration,smoothly printed-out with high accuracy.
  • Upgraded Ultra Silent Mother Board: Self-developed Industrial-grade Motherboard and TMC2208 Utra Silent Drive are adopted /Cost-effective /Running more stable/ Noise reduction /Compression resistance.
Prometheus 3d printer New
ANYCUBIC Photon Mono X 3D Printer, UV LCD Resin Printer with 8.9" 4K Monochrome Screen, WiFi Control and Fast Printing, Printing Size 192mmx120mmx250mm / 7.55inx4.72inx9.84in
  • 4K Monochrome Screen: ANYCUBIC Photon Mono X is a new UV Photocuring 3D resin printer with ultra-high resolution (3840*2400 pixels), highly restored details, and the screen service life is up to 2000h, more durable than ordinary color screen
  • 3X Faster Printing: single-layer exposure only takes 1-2 seconds, and the printing speed is Max 60mm/h, which is 3 times faster than ordinary resin printers. Do you want to finish printing faster? This printer help you to obtain higher quality models in a shorter time.
  • APP Remote Control & Large Printing Volume: Use this Mono X UV Photocuring LCD 3D Printer to realize remote printing management anytime and anywhere, monitor printing progress in real time, and adjust printing parameters at any time. In order to achieve the creation needs of larger models, it has a surprising printing volume, and printing volume size 192 * 120 * 250mm.
  • Double Linear Guide: Z-axis adopts the combination of double linear guide + screw motor + anti-backlash nut, improve the stability of Z-axis, run more stable, and eliminate printing layer lines. Independently researched and developed Anycubic slicing software, which is more powerful, supports 8 times anti-aliasing and smoother printing accuracy.
  • New Matrix UV Light Source: Using quartz lamp beads, a new generation of new matrix design, the light source is more uniform, and it can be used with 4K monochrome screen to achieve high-precision printing. The resin 3D printer contains exclusive UV heat dissipation channels, which can efficiently cool down, improve printing quality and service life, and reduce maintenance costs.

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Prometheus 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Prometheus 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

ANYCUBIC Photon Mono X 3D Printer, UV LCD Resin Printer with 8.9" 4K Monochrome Screen, WiFi Control and Fast Printing, Printing Size 192mmx120mmx250mm / 7.55inx4.72inx9.84in
  • 4K Monochrome Screen: ANYCUBIC Photon Mono X is a new UV Photocuring 3D resin printer with ultra-high resolution (3840*2400 pixels), highly restored details, and the screen service life is up to 2000h, more durable than ordinary color screen
  • 3X Faster Printing: single-layer exposure only takes 1-2 seconds, and the printing speed is Max 60mm/h, which is 3 times faster than ordinary resin printers. Do you want to finish printing faster? This printer help you to obtain higher quality models in a shorter time.
  • APP Remote Control & Large Printing Volume: Use this Mono X UV Photocuring LCD 3D Printer to realize remote printing management anytime and anywhere, monitor printing progress in real time, and adjust printing parameters at any time. In order to achieve the creation needs of larger models, it has a surprising printing volume, and printing volume size 192 * 120 * 250mm.
  • Double Linear Guide: Z-axis adopts the combination of double linear guide + screw motor + anti-backlash nut, improve the stability of Z-axis, run more stable, and eliminate printing layer lines. Independently researched and developed Anycubic slicing software, which is more powerful, supports 8 times anti-aliasing and smoother printing accuracy.
  • New Matrix UV Light Source: Using quartz lamp beads, a new generation of new matrix design, the light source is more uniform, and it can be used with 4K monochrome screen to achieve high-precision printing. The resin 3D printer contains exclusive UV heat dissipation channels, which can efficiently cool down, improve printing quality and service life, and reduce maintenance costs.
3D Printer Independent Dual Extruder 3D Printer High Accuracy Huge Build Volume 300x300x400mm AC115-240V 350W with Oversized Upgraded Nozzle(UK Plug)
  • 【EXCELLENT PERFORMANCE】Our worm gear reducer motors are made of excellent materials, fall resistant, wear-resistant, durable, long service life, we guarantee the product quality and everyone's experience in the process of use
  • 【LONG SERVICE LIFE】Our 3D printers are all made of excellent materials. They are strictly controlled in the manufacturing process and guaranteed in quality. Therefore, they have a long working life and can save more time and money
  • 【HIGH COST PERFORMANCE】The price of our printer is more affordable. Compared with other printers, our quality is better and the price is more favorable. We strictly control all aspects, so we have high cost performance
  • 【SPECIFICATION】Voltage: AC115v-240v, Printing Range: 300 x 300 x 400mm, Printing Thick Bottom: 0.1-0.4mm, Printing Accuracy: ±0.1mm, Nozzle Diameter: 0.2-0.8mm, Power: 350w, Hot Bed Temperature: ≤110℃, Nozzle Temperature: ≤260℃, Printing Speed: ≤180mm/s, Normal Printing Speed: 30-60mm/s
  • 【LOW NOISE】With high-quality design, the nozzle can slide smoothly when working, with low noise, high efficiency, good use experience, and simple structure, good operation, not difficult, suitable for most scenes
Dual Z Axis Upgrade Kit, Upgraded 3D Printer Upgrade Kit, for Creality Ender 3S/Ender‑3 Pro 3D Printer Kit for Printer
  • Small, light in weight, easy to install, bring you more convenience, and improving good experience.
  • With other accessories, you don't need to spend money to buy it, which provides more convenience for installation.
  • Upgraded dual z structure, provides smooth operation, and better performance.
  • High‑quality accessories, using all‑aluminum coupling and original 42 stepper motor, stable operation.
  • Made of high‑quality metal material, hard, wear‑resistant and longer service life.
ERYONE Metal Silk Rainbow, PLA Filament 1.75mm, Filament PLA for 3D Printer 1kg /Spool
  • Like silk, it retains the shiny silky smooth appearance of the foundation and adds an extra metallic luster to it
  • PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
  • 1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
  • The fixed color scheme makes it clearer when thinking about color of the prints. Purple--red copper--green--sand yellow--purple blue--ice blue--bronze--orange--rose red--light purple
Creality Ender 3 Max 3D Printer with Silent Motherboard, Meanwell Power Supply, Tempered Carborundum Glass Plate, Large Print Size 300x300x340mm
  • Meanwell Power Supply: Ender 3 Max comes with UL Certified power supply which with a stable output ensuring the temperature fluctuations are minimized and protecting your printer from unexpected power surges. It can heat the hot bed to 110¡æ in around 10 minutes.
  • Silent Motherboard: Backed by TMC2208 silent driver, reduce noise and wobbling during printing, smoother motion and quieter printing process.; BL touch installation also is available(not included in package, you can buy one if you need. Please flash firmware first if you use a BLTouch).
  • Tempered Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.
  • All Metal Extruder, Filament End Sensor, Dual Cooling Fans in Hot End Kit 2 Sides : promotes better printing result, prevent filament wasting and reduces filament blockage.
  • Customer Services and Warranty: All of our products come with a 12 Months limited replacement part and lifetime technical support.We provide original part for after sale.more than 20 engineers provide professional customer service. Please kindly contact us(seller) via ¡°ask a question¡± find us directly if you have any issue.

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Prometheus 3d printer actually costs.

Latest Prometheus 3d printer
Tresbro Assembled MK8 Extruder Hot End Kit Original Replacement Parts for Creality CR-10 3D Printer, 1.75mm Filament, 0.4mm Nozzle,12V 40W
  • All accessories of this extruder hotend kit is original and high quality from Creality.100% quality gurantee.
  • Work with different sizes of MK8 nozzles: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzles.There are total 6pcs 0.4mm brass nozzles in our package.
  • MK8 Extruder Hot End kit white wire was temperature thermistor, red wire was heating tube 12V 40W.
  • Excluded the assembled MK8 hotend kit,we prepared 3pcs silicone socks and 5pcs 0.4mm brass nozzle for replacement.It's always practice to have spare parts readily available because failures normally occur when you can least accept them and at a time where there is normally a holiday of sorts to make replacement and/or repair even more inaccessible.
  • More stabel temperature.The extruder hot end kit uses non-stick silicone sock instead of the cotton isolation. These silicone sleeves can keep the print head stay clean and prevent the filament from sticking to the heater block or spout.Can offer a huge boost in temperature stability, especially if you use high flow of cooling air around the nozzle to cool the print.
Latest Prometheus 3d printer
ANYCUBIC 3D Printer Mega S All Metal Frame and Updated Extruder, FDM DIY Printer Works, Free Test Filament with TPU/PLA/ABS Printing Size 210x210x205mm
  • Qucik Assembly: 3 steps to set up/assembled the printer with fix 8 screws within minutes not only to an expert user but also to beginner
  • Powerful Extruder: Anycubic mega s updated extruder greatly reduces the risk of clogged nozzle and bad extrusion to provide a better printing experience of flexible
  • Filament Sensor: Automatic printing pause when filament runs out, resume after filament re-load with just one click
  • Ultrabase Platform: 3D printer platform is covered a layer of patented microporous to provide excellent adhesion. And easy to take off the model from the platform after it cool down
  • Suspended Filament Rack: 3D fdm printer One-piece hanging design makes the feeding of filament more smoother, save space and more convenient
Latest Prometheus 3d printer
Creality Ender 3 3D Printer, Aluminum DIY Fully Open Source with Resume Printing Function 220x220x250mm
  • E Axis working: The E axis motor will start work when the nozzle temperature reaches over 185℃, then before starting printing, please remember to heat the nozzle temperature first.
  • Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs can be assembled in just 2 hours.
  • Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
  • Strict Test: Strict testing for key components before delivery and life-time technical supports available.
  • Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110℃.
Latest Prometheus 3d printer
Comgrow Creality 3D Ender 3 Pro 3D Printer with Cmagnet Build Plateform Surface Meanwell Power Supply Unit 220x220x250mm Print Size
  • Cmagnet Build Surface Plate: Flat surface for 3D printer, flat, protects the surface. The print models can be easily removed after cooling.
  • Meanwell Power Supply Unit: Ender 3 Pro with a UL-certified power supply, protects your printer from inexact power supply and can be heated up to 110 ° C in just 5 minutes.
  • 40x40 Y Axis Profile: Ender 3 Pro adopt 40x40 Y axis profile, this would be helpful to make the hot bed more stable. Then make the quallity of the print model better.
  • Semi Assebled Kit: Multiple Pieces Assembled This easy-to-set-up kit comes partially assembled so that once you assemble it, you can learn more about the basic setup of 3D printers. An entertaining STEM training in mechanical engineering and electronics.
  • WHAT CAN WE DO: As an authorized dealer of Creality 3D, we can offer you 100% original products. And can also offer you professional after-sales service.
DISCOUNTLatest Prometheus 3d printer
Official Creality CR-6 SE Leveling-free 3D Printer(Non-Kickstarter Version)with 32 Bit Silent Motherboard, Auto Bed leveling, Upgraded Extruder Build Volumn 235x235x250MM
  • 【Innovative Leveling-free Tech】 Featuring an innovative leveling-free device which is designed with a smart pressure sensor to truly achieve hassle-free and intelligently automatic platform leveling, greatly improving bed adhesion and print quality. CR-6 SE is factory pre-leveled and replace the leveling nuts on the Ender 3/CR-10, making the printing much easier.
  • 【Modularized Nozzle】 The CR-6 SE 3D printer includes a modularized nozzle for encouraging ease in nozzle maintenance and tinkering, which allows users to replace and substitute components with ease. The heat sink, heat block, teflon tube, and hotend are all deconstructable. A set of powerful cooling fans enables superior control over filament extrusion and retraction. The hotend also houses an filament runout sensor to pause prints when required.
  • 【Upgraded Dependable Extruder】 With its compact and reliable extruder, you know that a smoother extrusion and an easier filament feed will ultimately generate faster, quieter and smoother prints. Yes, this is what perfect 3D printing is all about! the new extruder design makes loading the filament quick and painless.
  • 【Silent Motherboard with Trinamic Driver】 A silent chipset is added to the CR-6 SE. Its latest trinamic driver 2208 helps to ensure that voltage control, fast movement, and printing in silence are a given. Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10.
  • 【Easy Assemble】 In comparison to an Ender 3, CR-6 SE comes almost assembled. You only need to spend 5 minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
Latest Prometheus 3d printer
ERYONE Metal Silk Rainbow, PLA Filament 1.75mm, Filament PLA for 3D Printer 1kg /Spool
  • Like silk, it retains the shiny silky smooth appearance of the foundation and adds an extra metallic luster to it
  • PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
  • 1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
  • The fixed color scheme makes it clearer when thinking about color of the prints. Purple--red copper--green--sand yellow--purple blue--ice blue--bronze--orange--rose red--light purple
Latest Prometheus 3d printer
Comgrow Creality Ender-3 3D Printer Aluminum DIY with Resume Print 220x220x250mm Print Size
  • E Axis working: The E axis motor will start work when the nozzle temperature reaches over 185℃, then before starting printing, please remember to heat the nozzle temperature first.
  • Easy and quick assembly: It is assembled with a few parts, 20 screws can be assembled in just 2 hours.
  • Extrusion reduces the risk of clogging and poor displacement; V-shape with POM wheels make moving noiseless, smooth and constant.
  • Strict test: 24 hours for key components before delivery and real-time technical support. Secure power supply guaranteed. Culture medium reaches 110 ℃ in just 5 minutes.
  • Note: As an authorized manufacturer, we, Comgrow, offer you 100% Creality 3 printers as well as technical support.
Latest Prometheus 3d printer
ANYCUBIC Photon Mono X 3D Printer, UV LCD Resin Printer with 8.9" 4K Monochrome Screen, WiFi Control and Fast Printing, Printing Size 192mmx120mmx250mm / 7.55inx4.72inx9.84in
  • 4K Monochrome Screen: ANYCUBIC Photon Mono X is a new UV Photocuring 3D resin printer with ultra-high resolution (3840*2400 pixels), highly restored details, and the screen service life is up to 2000h, more durable than ordinary color screen
  • 3X Faster Printing: single-layer exposure only takes 1-2 seconds, and the printing speed is Max 60mm/h, which is 3 times faster than ordinary resin printers. Do you want to finish printing faster? This printer help you to obtain higher quality models in a shorter time.
  • APP Remote Control & Large Printing Volume: Use this Mono X UV Photocuring LCD 3D Printer to realize remote printing management anytime and anywhere, monitor printing progress in real time, and adjust printing parameters at any time. In order to achieve the creation needs of larger models, it has a surprising printing volume, and printing volume size 192 * 120 * 250mm.
  • Double Linear Guide: Z-axis adopts the combination of double linear guide + screw motor + anti-backlash nut, improve the stability of Z-axis, run more stable, and eliminate printing layer lines. Independently researched and developed Anycubic slicing software, which is more powerful, supports 8 times anti-aliasing and smoother printing accuracy.
  • New Matrix UV Light Source: Using quartz lamp beads, a new generation of new matrix design, the light source is more uniform, and it can be used with 4K monochrome screen to achieve high-precision printing. The resin 3D printer contains exclusive UV heat dissipation channels, which can efficiently cool down, improve printing quality and service life, and reduce maintenance costs.
Latest Prometheus 3d printer
Comgrow Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 pro/Ender 5 3D Printer 235X235mm
  • ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
  • EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
  • CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
  • SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
  • UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Prometheus 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Prometheus 3d printer which are among the cheapest on the market. Just scroll through the list to find Prometheus 3d printer the cheapest products.

Catalog

The product Prometheus 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.

Prometheus 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Prometheus 3d printer New
ERYONE Metal Silk Rainbow, PLA Filament 1.75mm, Filament PLA for 3D Printer 1kg /Spool
  • Like silk, it retains the shiny silky smooth appearance of the foundation and adds an extra metallic luster to it
  • PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
  • 1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
  • The fixed color scheme makes it clearer when thinking about color of the prints. Purple--red copper--green--sand yellow--purple blue--ice blue--bronze--orange--rose red--light purple
Prometheus 3d printer New
Dual Z Axis Upgrade Kit, Upgraded 3D Printer Upgrade Kit, for Creality Ender 3S/Ender‑3 Pro 3D Printer Kit for Printer
  • Small, light in weight, easy to install, bring you more convenience, and improving good experience.
  • With other accessories, you don't need to spend money to buy it, which provides more convenience for installation.
  • Upgraded dual z structure, provides smooth operation, and better performance.
  • High‑quality accessories, using all‑aluminum coupling and original 42 stepper motor, stable operation.
  • Made of high‑quality metal material, hard, wear‑resistant and longer service life.
Prometheus 3d printer New
Creality Ender 3 Max 3D Printer with Silent Motherboard, Meanwell Power Supply, Tempered Carborundum Glass Plate, Large Print Size 300x300x340mm
  • Meanwell Power Supply: Ender 3 Max comes with UL Certified power supply which with a stable output ensuring the temperature fluctuations are minimized and protecting your printer from unexpected power surges. It can heat the hot bed to 110¡æ in around 10 minutes.
  • Silent Motherboard: Backed by TMC2208 silent driver, reduce noise and wobbling during printing, smoother motion and quieter printing process.; BL touch installation also is available(not included in package, you can buy one if you need. Please flash firmware first if you use a BLTouch).
  • Tempered Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.
  • All Metal Extruder, Filament End Sensor, Dual Cooling Fans in Hot End Kit 2 Sides : promotes better printing result, prevent filament wasting and reduces filament blockage.
  • Customer Services and Warranty: All of our products come with a 12 Months limited replacement part and lifetime technical support.We provide original part for after sale.more than 20 engineers provide professional customer service. Please kindly contact us(seller) via ¡°ask a question¡± find us directly if you have any issue.
Prometheus 3d printer New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
DISCOUNTPrometheus 3d printer New
Official Creality CR-6 SE Leveling-free 3D Printer(Non-Kickstarter Version)with 32 Bit Silent Motherboard, Auto Bed leveling, Upgraded Extruder Build Volumn 235x235x250MM
  • 【Innovative Leveling-free Tech】 Featuring an innovative leveling-free device which is designed with a smart pressure sensor to truly achieve hassle-free and intelligently automatic platform leveling, greatly improving bed adhesion and print quality. CR-6 SE is factory pre-leveled and replace the leveling nuts on the Ender 3/CR-10, making the printing much easier.
  • 【Modularized Nozzle】 The CR-6 SE 3D printer includes a modularized nozzle for encouraging ease in nozzle maintenance and tinkering, which allows users to replace and substitute components with ease. The heat sink, heat block, teflon tube, and hotend are all deconstructable. A set of powerful cooling fans enables superior control over filament extrusion and retraction. The hotend also houses an filament runout sensor to pause prints when required.
  • 【Upgraded Dependable Extruder】 With its compact and reliable extruder, you know that a smoother extrusion and an easier filament feed will ultimately generate faster, quieter and smoother prints. Yes, this is what perfect 3D printing is all about! the new extruder design makes loading the filament quick and painless.
  • 【Silent Motherboard with Trinamic Driver】 A silent chipset is added to the CR-6 SE. Its latest trinamic driver 2208 helps to ensure that voltage control, fast movement, and printing in silence are a given. Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10.
  • 【Easy Assemble】 In comparison to an Ender 3, CR-6 SE comes almost assembled. You only need to spend 5 minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
Prometheus 3d printer New
High Accuracy Power Supply 3D Printing Machine Huge Build Volume 3D Printer for 3D Printer with Upgraded Nozzle(British regulatory)
  • Complete accessories, simple and convenient to install
  • The printing range is 300x300x400mm, enough to operate
  • Made of excellent materials, with long working life
  • Accurate printing, excellent design structure, more suitable for long-time printing
  • High quality and great processing, which has high efficiency
Prometheus 3d printer New
3D Printer Independent Dual Extruder 3D Printer High Accuracy Huge Build Volume 300x300x400mm AC115-240V 350W with Oversized Upgraded Nozzle(UK Plug)
  • 【EXCELLENT PERFORMANCE】Our worm gear reducer motors are made of excellent materials, fall resistant, wear-resistant, durable, long service life, we guarantee the product quality and everyone's experience in the process of use
  • 【LONG SERVICE LIFE】Our 3D printers are all made of excellent materials. They are strictly controlled in the manufacturing process and guaranteed in quality. Therefore, they have a long working life and can save more time and money
  • 【HIGH COST PERFORMANCE】The price of our printer is more affordable. Compared with other printers, our quality is better and the price is more favorable. We strictly control all aspects, so we have high cost performance
  • 【SPECIFICATION】Voltage: AC115v-240v, Printing Range: 300 x 300 x 400mm, Printing Thick Bottom: 0.1-0.4mm, Printing Accuracy: ±0.1mm, Nozzle Diameter: 0.2-0.8mm, Power: 350w, Hot Bed Temperature: ≤110℃, Nozzle Temperature: ≤260℃, Printing Speed: ≤180mm/s, Normal Printing Speed: 30-60mm/s
  • 【LOW NOISE】With high-quality design, the nozzle can slide smoothly when working, with low noise, high efficiency, good use experience, and simple structure, good operation, not difficult, suitable for most scenes
Prometheus 3d printer New
SHENLIJUAN 3D Printer CR-10 V3 With BL Touch Auto-Level Touch Screen Large Build Volume 3D Printer 300mmx300mmx400mm With Capricorn PTFE 2020 Newest Printer
  • Strong Compatibility Auto & Manual Leveling:BL touch (Auto Leveling Device) can be added by yourself,enjoying more fun of DIY your own 3d printer.
  • Dual Port Fan Cooling Plenum:Dual-port cooling fan extruder, Evenly heat- dissipated and coaling dawn immediately. reducing plugging and poor- spillage ensures models with high quality.
  • A New Tough All Metal Frame: High quality V Profile selected, more stable without any vibration,smoothly printed-out with high accuracy.
  • Upgraded Ultra Silent Mother Board: Self-developed Industrial-grade Motherboard and TMC2208 Utra Silent Drive are adopted /Cost-effective /Running more stable/ Noise reduction /Compression resistance.
Prometheus 3d printer New
ANYCUBIC Photon Mono X 3D Printer, UV LCD Resin Printer with 8.9" 4K Monochrome Screen, WiFi Control and Fast Printing, Printing Size 192mmx120mmx250mm / 7.55inx4.72inx9.84in
  • 4K Monochrome Screen: ANYCUBIC Photon Mono X is a new UV Photocuring 3D resin printer with ultra-high resolution (3840*2400 pixels), highly restored details, and the screen service life is up to 2000h, more durable than ordinary color screen
  • 3X Faster Printing: single-layer exposure only takes 1-2 seconds, and the printing speed is Max 60mm/h, which is 3 times faster than ordinary resin printers. Do you want to finish printing faster? This printer help you to obtain higher quality models in a shorter time.
  • APP Remote Control & Large Printing Volume: Use this Mono X UV Photocuring LCD 3D Printer to realize remote printing management anytime and anywhere, monitor printing progress in real time, and adjust printing parameters at any time. In order to achieve the creation needs of larger models, it has a surprising printing volume, and printing volume size 192 * 120 * 250mm.
  • Double Linear Guide: Z-axis adopts the combination of double linear guide + screw motor + anti-backlash nut, improve the stability of Z-axis, run more stable, and eliminate printing layer lines. Independently researched and developed Anycubic slicing software, which is more powerful, supports 8 times anti-aliasing and smoother printing accuracy.
  • New Matrix UV Light Source: Using quartz lamp beads, a new generation of new matrix design, the light source is more uniform, and it can be used with 4K monochrome screen to achieve high-precision printing. The resin 3D printer contains exclusive UV heat dissipation channels, which can efficiently cool down, improve printing quality and service life, and reduce maintenance costs.

Where to buy?

If you are asking yourself where to buy Prometheus 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Prometheus 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Prometheus 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Prometheus 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Prometheus 3d printer used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Prometheus 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

ANYCUBIC Photon Mono X 3D Printer, UV LCD Resin Printer with 8.9" 4K Monochrome Screen, WiFi Control and Fast Printing, Printing Size 192mmx120mmx250mm / 7.55inx4.72inx9.84in
  • 4K Monochrome Screen: ANYCUBIC Photon Mono X is a new UV Photocuring 3D resin printer with ultra-high resolution (3840*2400 pixels), highly restored details, and the screen service life is up to 2000h, more durable than ordinary color screen
  • 3X Faster Printing: single-layer exposure only takes 1-2 seconds, and the printing speed is Max 60mm/h, which is 3 times faster than ordinary resin printers. Do you want to finish printing faster? This printer help you to obtain higher quality models in a shorter time.
  • APP Remote Control & Large Printing Volume: Use this Mono X UV Photocuring LCD 3D Printer to realize remote printing management anytime and anywhere, monitor printing progress in real time, and adjust printing parameters at any time. In order to achieve the creation needs of larger models, it has a surprising printing volume, and printing volume size 192 * 120 * 250mm.
  • Double Linear Guide: Z-axis adopts the combination of double linear guide + screw motor + anti-backlash nut, improve the stability of Z-axis, run more stable, and eliminate printing layer lines. Independently researched and developed Anycubic slicing software, which is more powerful, supports 8 times anti-aliasing and smoother printing accuracy.
  • New Matrix UV Light Source: Using quartz lamp beads, a new generation of new matrix design, the light source is more uniform, and it can be used with 4K monochrome screen to achieve high-precision printing. The resin 3D printer contains exclusive UV heat dissipation channels, which can efficiently cool down, improve printing quality and service life, and reduce maintenance costs.
3D Printer Independent Dual Extruder 3D Printer High Accuracy Huge Build Volume 300x300x400mm AC115-240V 350W with Oversized Upgraded Nozzle(UK Plug)
  • 【EXCELLENT PERFORMANCE】Our worm gear reducer motors are made of excellent materials, fall resistant, wear-resistant, durable, long service life, we guarantee the product quality and everyone's experience in the process of use
  • 【LONG SERVICE LIFE】Our 3D printers are all made of excellent materials. They are strictly controlled in the manufacturing process and guaranteed in quality. Therefore, they have a long working life and can save more time and money
  • 【HIGH COST PERFORMANCE】The price of our printer is more affordable. Compared with other printers, our quality is better and the price is more favorable. We strictly control all aspects, so we have high cost performance
  • 【SPECIFICATION】Voltage: AC115v-240v, Printing Range: 300 x 300 x 400mm, Printing Thick Bottom: 0.1-0.4mm, Printing Accuracy: ±0.1mm, Nozzle Diameter: 0.2-0.8mm, Power: 350w, Hot Bed Temperature: ≤110℃, Nozzle Temperature: ≤260℃, Printing Speed: ≤180mm/s, Normal Printing Speed: 30-60mm/s
  • 【LOW NOISE】With high-quality design, the nozzle can slide smoothly when working, with low noise, high efficiency, good use experience, and simple structure, good operation, not difficult, suitable for most scenes
Dual Z Axis Upgrade Kit, Upgraded 3D Printer Upgrade Kit, for Creality Ender 3S/Ender‑3 Pro 3D Printer Kit for Printer
  • Small, light in weight, easy to install, bring you more convenience, and improving good experience.
  • With other accessories, you don't need to spend money to buy it, which provides more convenience for installation.
  • Upgraded dual z structure, provides smooth operation, and better performance.
  • High‑quality accessories, using all‑aluminum coupling and original 42 stepper motor, stable operation.
  • Made of high‑quality metal material, hard, wear‑resistant and longer service life.
ERYONE Metal Silk Rainbow, PLA Filament 1.75mm, Filament PLA for 3D Printer 1kg /Spool
  • Like silk, it retains the shiny silky smooth appearance of the foundation and adds an extra metallic luster to it
  • PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 1.75mm filament diameter (dimensional accuracy +/- 0.05mm).
  • 1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15"
  • The fixed color scheme makes it clearer when thinking about color of the prints. Purple--red copper--green--sand yellow--purple blue--ice blue--bronze--orange--rose red--light purple
Creality Ender 3 Max 3D Printer with Silent Motherboard, Meanwell Power Supply, Tempered Carborundum Glass Plate, Large Print Size 300x300x340mm
  • Meanwell Power Supply: Ender 3 Max comes with UL Certified power supply which with a stable output ensuring the temperature fluctuations are minimized and protecting your printer from unexpected power surges. It can heat the hot bed to 110¡æ in around 10 minutes.
  • Silent Motherboard: Backed by TMC2208 silent driver, reduce noise and wobbling during printing, smoother motion and quieter printing process.; BL touch installation also is available(not included in package, you can buy one if you need. Please flash firmware first if you use a BLTouch).
  • Tempered Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.
  • All Metal Extruder, Filament End Sensor, Dual Cooling Fans in Hot End Kit 2 Sides : promotes better printing result, prevent filament wasting and reduces filament blockage.
  • Customer Services and Warranty: All of our products come with a 12 Months limited replacement part and lifetime technical support.We provide original part for after sale.more than 20 engineers provide professional customer service. Please kindly contact us(seller) via ¡°ask a question¡± find us directly if you have any issue.

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Prometheus 3d printer.

Rating: 3.93 of 5 - 27 votes
1 Star2 Stars3 Stars4 Stars5 Stars (27 votes, average: 3.93 out of 5)
Loading...