Printrbot plus 3d printer Reviews and Best Deals

Find online Product Reviews, Ranks and Prices for Printrbot plus 3d printer. Shop Printrbot plus 3d printer directly from the 2021 Top Online Stores like Amazon, eBay and Aliexpress. Don't miss out on the top promotions for Printrbot plus 3d printer, buy Printrbot plus 3d printer directly online and enjoy big saving on your purchases.

Latest Printrbot plus 3d printer
3D Printer Filament, PLA Plus Filament 1.75mm, 3D Printer Filament PLA+, 1KG Grey
  • 【Toughness plus = SUNLU PLA plus, Say No to Brittle 】SUNLU PLA plus no as brittle as normal PLA. Better toughness, brighter color, higher strength;lower shrinkage, lower warping; SUNLU PLA plus filament more easier to print, and odorless, making good print results.
  • 【1.75mm 1KG Pack Vacuum Pack PLA + Filament】 1kg spool 1.75mm filament PLA in vacuum packing. SUNLU 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
  • 【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged.
  • 【High Precision +/- 0.02mm Tolerance】: 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
DISCOUNTLatest Printrbot plus 3d printer
SUNLU PLA+ Filament 1.75mm Silk Rainbow Multicolor for FDM 3D Printer, 1KG/Spool PLA Plus Shiny Silk Rainbow
  • 【Highlight Shiny Silk Color Change Rainbow PLA+】Nice shiny special rainbow multi color Gradient. Around Each 13 - 15 Meters to Change Color. No polishing needed, you can print multi beautiful different colors in one spool filament, silk glossy smooth appearance, perfect for arts, crafts, DIY, many different 3D print projects, printing at a high detail results in a beautiful finish
  • 【Popular Silk Shinning Colors】: Smooth&Silk-Like Feel - silky shinny surface with silk luster, giving smooth, pearly and unique touch. The finished 3D printed Items with beautiful silk shiny performance. no polishing needed, printing at a high detail results in a beautiful finish. SUNLU silk PLA+ filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result!
  • 【1.75mm High Precision +/- 0.02mm Tolerance】: 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged. Recommened nozzle temp print temp.: 200-230℃, platform temp 60-80℃(glue is required if you want better print effect).
  • 【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
Latest Printrbot plus 3d printer
YOTINO Assembled MK8 Extruder 0.2, 0.3, 0.4, 0.5mm Print Nozzle Hotend for MakerBot Prusa i3 Reprap 3D Printer Compatible with 1.75mm Filament
  • Assembled MK8 extruder kit, with 0.2, 0.3, 0.4, 0.5mm print nozzle head.Filament size: 1.75mm
  • Working voltage: 12V, suitable for most kinds of prusa i3 3d printers
  • Special ceramic insulation cotton ensures the stability of heating
  • Nema 17 stepper motor come with 1 meter stepper motor wire, features larger torque and less heat buildup
  • Perfect for 3D printers like Mendel, Prusa, Makerbot, and Printrbot and others.
Latest Printrbot plus 3d printer
SUNLU 3D Printer Filament ABS , 1.75mm ABS 3D Printer Filament, 3D Printing Filament ABS for 3D Printer, 1kg, Black
  • 【No Plugging, Consistent Diameter & Roundness】: Better flow of SUNLU no plugging premium 1.75mm ABS filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. 100% New Virgin Material FROM Korea.
  • 【 High Precision +/- 0.02mm Tolerance】: 1.75mm ABS 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325 m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【Zero Hassle Printing 3D Printing Material】3d filament ABS 1.75 is an excellent impact strength, abrasion performance, chemical resistance and dyeability material. Can print models have strict requirement of strenght and good for printing smail parts.
  • 【Recommended Printing Temp/Nozzle Temperature】: ABS 3d filament suggest printing temperature is 210°C - 240°C (410°F - 464°F) - Use With Heated Build Platform Is Recommended.
  • 【High Compatibility 】Compatible with all FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen).
Latest Printrbot plus 3d printer
eSUN 2 Styles 3D Printer Filament Sample Bag, Super Tough PLA and PLA+ Filament 1.75mm, 10 Meter (32.8 Feet) per Roll 3D Printing Filament for 3D Printers, Natural and Cold White
  • 【Package Includes】1 Roll 10-Meter Super Tough PLA and 1 Roll 10-Meter PLA+ Filament Sample Bag. The product is a sample filament for testing, and the picture shown is for reference. Any problem please feel free to contact us.
  • 【Higher Toughness】Compared with PLA+ and PLA, Super Tough PLA has higher toughness and impact resistance, higher elongation at break, and better bending resistance. Suitable for printing parts with higher requirements for toughness.
  • 【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
  • 【Tangle Free & No Plugging】Length: 10M per style, 20M in total. Perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, no cracking, no bubbles, feed smoothly and constantly without clogging the nozzle or extruder.
  • 【High Compatibility】Compatible with most of FDM 3D Printers that use 1.75MM filament, Such as: Prusa, Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Aleph Objects, Makergear, Up, Lulzbot, Simplify3D, Flashforge, etc.
Latest Printrbot plus 3d printer
AMOLEN 3D Printer Filament Glow in The Dark Green, PLA Filament 1.75mm +/- 0.03 mm, 3D Printing Materials for 3D Printer and 3D Pen, 1KG
  • 【Glow in the Dark and Presents】This type of PLA filament 1.75mm contains phosphorescent materials that glow in the dark after absorbing light energy. The finished items printed by the glow in the dark PLA filament are the best choice as gifts for birthday, Christmas, New Year, Halloween and Valentine's Day.
  • 【High Compatibility】Amolen 1.75mm PLA filament is perfectly compatible with most of the FDM 3D Printer, MakerBot, LulzBot, FlashForge, UP, Printrbot, Solidoodle, Reprap, Mendel, MakerGear.
  • 【Dimensional Accuracy】1.75mm filament, diameter variance of no more than 30 microns for consistent feeding and better 3D prints.
  • 【Smootly Print】AMOLEN engineered its Professional 3D Printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation with your 3D printer and superior results. AMOLEN 1.75mm PLA filament features good shaping, no bubble, no jamming, no warping.
  • 【High Performance】Orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder. AMOLEN PLA filament is the choice of engineers, designers, and anyone else into 3D printing who demands the best.
Latest Printrbot plus 3d printer
Flashforge 10745 3D Printer Creator Pro Dual Extruder Printer with Optimized Build Plate and Upgraded Spool Holder
  • Structural stability guarantees the steady high-speed and high-precision printing
  • Fully-covered body, removable cover to meet the temperature requirements of different filaments
  • Patented extruder structure, optimized for flexible and normal filament, compatible with other filament in the market
  • Open-source software, compatible with different slicing engines, support multiple printing formats
  • Flash print is able to slice complex model, "Cut", "2D-3D sculpture printing" function added...
Latest Printrbot plus 3d printer
Stronghero3D Desktop FDM 3D Printer Filament PLA Red 1.75 mm 1 kg (2.2 lbs) Dimension Accuracy of +/- 0.05 mm for Ender3 Cr10
  • Toughness plus = Strongheor3D PLA plus, not as brittle as normal PLA. Better toughness, brighter colour, higher strength, lower shrinkage, lower warping; filament easier to print and odourless, resulting in good printing results. 
  • 1.75 mm 1 kg vacuum packaging PLA + filament 1 kg spool 1.75 mm filament PLA in vacuum packaging. All filaments are vacuum sealed together with a desiccant pack. In this way, you can easily keep your 3D printer filaments in optimal storage condition and free from dust or dirt before opening the vacuum sealed packaging. 
  • Good layer adhesion and no clogging. 3D printing material. Better flow, no clogging. Premium 1.75 mm PLA filament. It has a constant diameter and uniform roundness, less threads and warps as well as a strong layer adhesion. Article free and free from impurities. No impurities, no clogging. 
  • High precision +/- 0.05mm tolerance: 1.75mm PLA + 3D filament (tolerance level: ± 0.05mm) Full 1 kg 3D printer filament roll, perfect roundness and very tight diameter tolerance, approx. 325 m filament on each spool, easy operation, minimal warping, no clogging, no bubbles. Increase the delicacy of your 3D printing objects. 
  • High compatibility and 100% environmental materialCompatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D Pen Environmental protection made from starch materials from renewable raw materials.
Latest Printrbot plus 3d printer
ANYCUBIC 3D Printer Mega S All Metal Frame and Updated Extruder, FDM DIY Printer Works, Free Test Filament with TPU/PLA/ABS Printing Size 210x210x205mm
  • Qucik Assembly: 3 steps to set up/assembled the Mega s printer with fix 8 screws within minutes not only to an expert user but also to beginner
  • Powerful Extruder: Anycubic mega s updated extruder greatly reduces the risk of clogged nozzle and bad extrusion to provide a better printing experience of flexible
  • Filament Sensor: Automatic printing pause when filament runs out, resume after filament re-load with just one click
  • Ultrabase Platform: 3D printer platform is covered a layer of patented microporous to provide excellent adhesion. And easy to take off the model from the platform after it cool down
  • Suspended Filament Rack: 3D fdm printer One-piece hanging design makes the feeding of filament more smoother, save space and more convenient
Latest Printrbot plus 3d printer
3DLAC plus 3D Printer Adhesive & Anti-Warping Spray
  • Antiwarping spray
  • Helps prints adhere to the build surface
  • Allows for easy removal of prints once bed has cooled
  • Spray middle of the build surface from 20cm
  • Works with PLA/ABS & vast majority of materials

Overview


Reviews 2021

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Printrbot plus 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Printrbot plus 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

DISCOUNTBest
SUNLU PLA+ Filament 1.75mm Silk Rainbow Multicolor for FDM 3D Printer, 1KG/Spool PLA Plus Shiny Silk Rainbow
  • 【Highlight Shiny Silk Color Change Rainbow PLA+】Nice shiny special rainbow multi color Gradient. Around Each 13 - 15 Meters to Change Color. No polishing needed, you can print multi beautiful different colors in one spool filament, silk glossy smooth appearance, perfect for arts, crafts, DIY, many different 3D print projects, printing at a high detail results in a beautiful finish
  • 【Popular Silk Shinning Colors】: Smooth&Silk-Like Feel - silky shinny surface with silk luster, giving smooth, pearly and unique touch. The finished 3D printed Items with beautiful silk shiny performance. no polishing needed, printing at a high detail results in a beautiful finish. SUNLU silk PLA+ filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result!
  • 【1.75mm High Precision +/- 0.02mm Tolerance】: 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged. Recommened nozzle temp print temp.: 200-230℃, platform temp 60-80℃(glue is required if you want better print effect).
  • 【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
Best
SUNLU 3D Printer Filament PLA Plus, 1.75mm PLA Filament, 3D Printing Filament Low Odor, Dimensional Accuracy +/- 0.02 mm, 2.2 LBS (1KG) Spool 3D Filament, Red PLA+
  • 【Toughness plus = SUNLU PLA plus, Say No to Brittle 】SUNLU PLA plus no as brittle as normal PLA. Better toughness, brighter color, higher strength;lower shrinkage, lower warping; SUNLU PLA plus filament more easier to print, and odorless, making good print results.
  • 【1.75mm 1KG Pack Vacuum Pack PLA + Filament】 1kg spool 1.75mm filament PLA in vacuum packing. SUNLU 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
  • 【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged.
  • 【High Precision +/- 0.02mm Tolerance】: 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
Best
AMOLEN 3D Printer Filament Glow in The Dark Green, PLA Filament 1.75mm +/- 0.03 mm, 3D Printing Materials for 3D Printer and 3D Pen, 1KG
  • 【Glow in the Dark and Presents】This type of PLA filament 1.75mm contains phosphorescent materials that glow in the dark after absorbing light energy. The finished items printed by the glow in the dark PLA filament are the best choice as gifts for birthday, Christmas, New Year, Halloween and Valentine's Day.
  • 【High Compatibility】Amolen 1.75mm PLA filament is perfectly compatible with most of the FDM 3D Printer, MakerBot, LulzBot, FlashForge, UP, Printrbot, Solidoodle, Reprap, Mendel, MakerGear.
  • 【Dimensional Accuracy】1.75mm filament, diameter variance of no more than 30 microns for consistent feeding and better 3D prints.
  • 【Smootly Print】AMOLEN engineered its Professional 3D Printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation with your 3D printer and superior results. AMOLEN 1.75mm PLA filament features good shaping, no bubble, no jamming, no warping.
  • 【High Performance】Orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder. AMOLEN PLA filament is the choice of engineers, designers, and anyone else into 3D printing who demands the best.
Best
Best
SUNLU 3D Printer Filament ABS , 1.75mm ABS 3D Printer Filament, 3D Printing Filament ABS for 3D Printer, 1kg, Black
  • 【No Plugging, Consistent Diameter & Roundness】: Better flow of SUNLU no plugging premium 1.75mm ABS filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. 100% New Virgin Material FROM Korea.
  • 【 High Precision +/- 0.02mm Tolerance】: 1.75mm ABS 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325 m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【Zero Hassle Printing 3D Printing Material】3d filament ABS 1.75 is an excellent impact strength, abrasion performance, chemical resistance and dyeability material. Can print models have strict requirement of strenght and good for printing smail parts.
  • 【Recommended Printing Temp/Nozzle Temperature】: ABS 3d filament suggest printing temperature is 210°C - 240°C (410°F - 464°F) - Use With Heated Build Platform Is Recommended.
  • 【High Compatibility 】Compatible with all FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen).

On this product review you can find the list of the best Printrbot plus 3d printer including the technical product sheet, reviews issued by real buyes who have already purchased the products. You can also find info on the prices, active promotions and deals in the United Kingdom (UK).

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Printrbot plus 3d printer

Here is the ranking of the best Printrbot plus 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Printrbot plus 3d printer and read the reviews left by real customers, see the Printrbot plus 3d printer ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Printrbot plus 3d printer New
Stronghero3D Desktop FDM 3D Printer Filament PLA Blue 1.75 mm 1 kg (2.2 lbs) Dimension Accuracy of +/- 0.05 mm for Ender3 Cr10
  • Toughness plus = Strongheor3D PLA plus, not as brittle as normal PLA. Better toughness, brighter colour, higher strength, lower shrinkage, lower warping; filament easier to print and odourless, resulting in good printing results. 
  • 1.75 mm 1 kg vacuum packaging PLA + filament 1 kg spool 1.75 mm filament PLA in vacuum packaging. All filaments are vacuum sealed together with a desiccant pack. In this way, you can easily keep your 3D printer filaments in optimal storage condition and free from dust or dirt before opening the vacuum sealed packaging. 
  • Good layer adhesion and no clogging. 3D printing material. Better flow, no clogging. Premium 1.75 mm PLA filament. It has a constant diameter and uniform roundness, less threads and warps as well as a strong layer adhesion. Article free and free from impurities. No impurities, no clogging. 
  • High precision +/- 0.05mm tolerance: 1.75mm PLA + 3D filament (tolerance level: ± 0.05mm) Full 1 kg 3D printer filament roll, perfect roundness and very tight diameter tolerance, approx. 325 m filament on each spool, easy operation, minimal warping, no clogging, no bubbles. Increase the delicacy of your 3D printing objects. 
  • High compatibility and 100% environmental materialCompatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D Pen Environmental protection made from starch materials from renewable raw materials.
Printrbot plus 3d printer New
Xpork PLA+ Filament 1.75mm PLA Plus 3D Printer Filament Dimensional Accuracy +/- 0.03mm 1KG (2.2 LBS) Spool 3D Printing Filament for 3D Printers Black
  • 【No wrapping and no blocking】Total length: 340-350m. A complete 1KG 3D printer filament spool, perfect roundness and very close diameter tolerance, will not overlap or entangle. It melts well, feeds smoothly and continuously without clogging the nozzle or extruder.
  • [Environmental protection material] PLA+ is improved and upgraded on the basis of PLA, with high strength and toughness. The eSUN filament is made of pure materials, biodegradable, environmentally friendly, non-toxic, low odor, and no harm to users and the environment.
  • [High compatibility] Compatible with most FDM 3D printers using 1.75MM filament,
  • [Vacuum sealed packaging] Net weight: 1KG. The eSUN filament is packed in a sealed vacuum bag with a desiccant bag to keep it dry, prevent dust and foreign matter from entering, prevent nozzle jams and produce a smooth 3D model.
  • [Dimensions tolerance +/- 0.03mm] The smallest tolerance and low warpage to ensure consistent paper feeding and stable printing, no clogging, high success rate, so that the printed parts have excellent surface finish and high Accuracy.
Printrbot plus 3d printer New
PLA Filament For 3D Printer 1.75mm 1kg Spool Printing Material, Vacuum Packaging, Orange PLA
  • The smallest tolerance and low warpage, size tolerance +/- 0.02mm to ensure consistent paper feeding and stable printing, no clogging, high success rate, so that the printed parts have excellent surface finish and high precision.
  • Total length: 340-350m. A complete 1KG 3D printer filament spool, perfect roundness and very close diameter tolerance, will not overlap or entangle. It melts well, feeds smoothly and continuously without clogging the nozzle or extruder.
  • PLA has high strength and toughness. The filament is made of pure materials, biodegradable, environmentally friendly, non-toxic, low odor, and no harm to users and the environment.
  • Compatible with most FDM 3D printers using 1.75MM filament, such as: Prusa, Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Aleph Objects, Makergear, Up, Lulzbot, Simplify3D, Flashforge, etc.
  • Net weight: 1KG filament is packed in a sealed vacuum bag with a desiccant bag to keep it dry, prevent dust and foreign matter from entering, prevent nozzle jams and produce a smooth 3D model.
Printrbot plus 3d printer New
Aibecy Dual Print Head Extruder Full Kit, with 0.4mm Brass Nozzle, for 1.75mm Filament, Compatible with Ultimaker2 DIY Model 3D Printer
  • 100% brand new high quality accessories for 3D printer.
  • High-quality linear bearing, classic cross shaft slide design, smooth sliding.
  • High expansibility, can install double cooling air duct.
  • Improve thick wall PTFE parts, more reliable and durable.
  • Compatible with Ultimaker2 and cross-axis 3D printers.
Printrbot plus 3d printer New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Printrbot plus 3d printer New
Comgrow Creality Ender 3 Max FDM 3D Printer with Silent Mainboard Meanwell Power Supply Carborundum Glass Platform Large Print Size 300x300x400mm
  • Meanwell Power Supply: The powerful 350W power supply can be adjusted to adapt the voltage from 100V to 240V. Safe to use, and powerful in heating up.
  • Silent Mainboard: Ender 3 Max adopt the German import TMC2208 chip driver. It is effective to reduce the motor noise and shake that brings a comfortable and silent work environment for you.
  • Carborundum Glass Platform: With its superiority in heat resistance and surface flatness, the Carborundum glass platform helps prints adhere better and users remove prints easier. No wrapping and no scratches.
  • Dual Cooling Fans: The axial cooling fan continuously helps hotend heat dissipation. The double blower fans promote quick cooling on the extruded filament. Always deliver fine results.
  • All Metal Extruder: All-metal Bowden extruder is powerful in filament feed-in.
Printrbot plus 3d printer New
FlashForge 3D Printer Creator Pro, Metal Frame Structure, Acrylic Covers, Optimized Build Platform, Dual Extruder W/2 Spools, Works with ABS and PLA
  • Patented dual extruder – Support dual color print and dual material print. And better quality by using cooling fan.
  • Heating bed – Rapid steady heating prevent model warping much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG,TPU etc.
  • Open source software – Support mutiple printing formats and compatible with different slicing engines ,eg:Simplify3D,ReplicatorG,Makerware,Slic3r,Skeinforge,Cura.
  • Out of box – Creator Pro is suitable for industrial design,tool design,architecture designer,mechanical designer etc.
  • What you get – Flashforge 3d printer Creator Pro12 months warranty, lifetime technical assistance and 24 hours professional customer service.
Printrbot plus 3d printer New
ANYCUBIC 3D Printer 4max Pro Large Build Volume, FDM DIY Printer Works with ABS,TPU,PLA,HIPS 454mm×466mm×410mm
  • Large Build Volume With Hassle-Free Assembly: A fully pre-assembled machine allows you get stared quickly. 270mm(L)×210(W) ×190mm(H), big size for you limitless imagination.
  • Industrial-Grade Components for Superior Print: Quality Integrated sheet metal structure to enhance the stability when printing Z-axis double graphite bearing reduces the lag and improves the printing accuracy self-lubricating anti abrasive smooth
  • Dual Gear Extrusion Mechanism: Optimized extrusion torque and path orientation. Compatible with flexible filaments like TPU.
  • Ultra-quiet TMC2208 stepper drivers: significantly reduces noise while printing (< 50 decibels)
  • Resume Print & Filament Sensor: Resume from power loss feature allows the printer to resume printing automatically after a power cut
Printrbot plus 3d printer New
SHENLIJUAN 3D Printer CR-10 V3 With BL Touch Auto-Level Touch Screen Large Build Volume 3D Printer 300mmx300mmx400mm With Capricorn PTFE 2020 Newest Printer
  • Strong Compatibility Auto & Manual Leveling:BL touch (Auto Leveling Device) can be added by yourself,enjoying more fun of DIY your own 3d printer.
  • Dual Port Fan Cooling Plenum:Dual-port cooling fan extruder, Evenly heat- dissipated and coaling dawn immediately. reducing plugging and poor- spillage ensures models with high quality.
  • A New Tough All Metal Frame: High quality V Profile selected, more stable without any vibration,smoothly printed-out with high accuracy.
  • Upgraded Ultra Silent Mother Board: Self-developed Industrial-grade Motherboard and TMC2208 Utra Silent Drive are adopted /Cost-effective /Running more stable/ Noise reduction /Compression resistance.

Prices

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Printrbot plus 3d printer actually costs.

Latest Printrbot plus 3d printer
3D Printer Filament, PLA Plus Filament 1.75mm, 3D Printer Filament PLA+, 1KG Grey
  • 【Toughness plus = SUNLU PLA plus, Say No to Brittle 】SUNLU PLA plus no as brittle as normal PLA. Better toughness, brighter color, higher strength;lower shrinkage, lower warping; SUNLU PLA plus filament more easier to print, and odorless, making good print results.
  • 【1.75mm 1KG Pack Vacuum Pack PLA + Filament】 1kg spool 1.75mm filament PLA in vacuum packing. SUNLU 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
  • 【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged.
  • 【High Precision +/- 0.02mm Tolerance】: 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
DISCOUNTLatest Printrbot plus 3d printer
SUNLU PLA+ Filament 1.75mm Silk Rainbow Multicolor for FDM 3D Printer, 1KG/Spool PLA Plus Shiny Silk Rainbow
  • 【Highlight Shiny Silk Color Change Rainbow PLA+】Nice shiny special rainbow multi color Gradient. Around Each 13 - 15 Meters to Change Color. No polishing needed, you can print multi beautiful different colors in one spool filament, silk glossy smooth appearance, perfect for arts, crafts, DIY, many different 3D print projects, printing at a high detail results in a beautiful finish
  • 【Popular Silk Shinning Colors】: Smooth&Silk-Like Feel - silky shinny surface with silk luster, giving smooth, pearly and unique touch. The finished 3D printed Items with beautiful silk shiny performance. no polishing needed, printing at a high detail results in a beautiful finish. SUNLU silk PLA+ filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result!
  • 【1.75mm High Precision +/- 0.02mm Tolerance】: 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged. Recommened nozzle temp print temp.: 200-230℃, platform temp 60-80℃(glue is required if you want better print effect).
  • 【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
Latest Printrbot plus 3d printer
YOTINO Assembled MK8 Extruder 0.2, 0.3, 0.4, 0.5mm Print Nozzle Hotend for MakerBot Prusa i3 Reprap 3D Printer Compatible with 1.75mm Filament
  • Assembled MK8 extruder kit, with 0.2, 0.3, 0.4, 0.5mm print nozzle head.Filament size: 1.75mm
  • Working voltage: 12V, suitable for most kinds of prusa i3 3d printers
  • Special ceramic insulation cotton ensures the stability of heating
  • Nema 17 stepper motor come with 1 meter stepper motor wire, features larger torque and less heat buildup
  • Perfect for 3D printers like Mendel, Prusa, Makerbot, and Printrbot and others.
Latest Printrbot plus 3d printer
SUNLU 3D Printer Filament ABS , 1.75mm ABS 3D Printer Filament, 3D Printing Filament ABS for 3D Printer, 1kg, Black
  • 【No Plugging, Consistent Diameter & Roundness】: Better flow of SUNLU no plugging premium 1.75mm ABS filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. 100% New Virgin Material FROM Korea.
  • 【 High Precision +/- 0.02mm Tolerance】: 1.75mm ABS 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325 m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • 【Zero Hassle Printing 3D Printing Material】3d filament ABS 1.75 is an excellent impact strength, abrasion performance, chemical resistance and dyeability material. Can print models have strict requirement of strenght and good for printing smail parts.
  • 【Recommended Printing Temp/Nozzle Temperature】: ABS 3d filament suggest printing temperature is 210°C - 240°C (410°F - 464°F) - Use With Heated Build Platform Is Recommended.
  • 【High Compatibility 】Compatible with all FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen).
Latest Printrbot plus 3d printer
eSUN 2 Styles 3D Printer Filament Sample Bag, Super Tough PLA and PLA+ Filament 1.75mm, 10 Meter (32.8 Feet) per Roll 3D Printing Filament for 3D Printers, Natural and Cold White
  • 【Package Includes】1 Roll 10-Meter Super Tough PLA and 1 Roll 10-Meter PLA+ Filament Sample Bag. The product is a sample filament for testing, and the picture shown is for reference. Any problem please feel free to contact us.
  • 【Higher Toughness】Compared with PLA+ and PLA, Super Tough PLA has higher toughness and impact resistance, higher elongation at break, and better bending resistance. Suitable for printing parts with higher requirements for toughness.
  • 【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
  • 【Tangle Free & No Plugging】Length: 10M per style, 20M in total. Perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, no cracking, no bubbles, feed smoothly and constantly without clogging the nozzle or extruder.
  • 【High Compatibility】Compatible with most of FDM 3D Printers that use 1.75MM filament, Such as: Prusa, Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Aleph Objects, Makergear, Up, Lulzbot, Simplify3D, Flashforge, etc.
Latest Printrbot plus 3d printer
AMOLEN 3D Printer Filament Glow in The Dark Green, PLA Filament 1.75mm +/- 0.03 mm, 3D Printing Materials for 3D Printer and 3D Pen, 1KG
  • 【Glow in the Dark and Presents】This type of PLA filament 1.75mm contains phosphorescent materials that glow in the dark after absorbing light energy. The finished items printed by the glow in the dark PLA filament are the best choice as gifts for birthday, Christmas, New Year, Halloween and Valentine's Day.
  • 【High Compatibility】Amolen 1.75mm PLA filament is perfectly compatible with most of the FDM 3D Printer, MakerBot, LulzBot, FlashForge, UP, Printrbot, Solidoodle, Reprap, Mendel, MakerGear.
  • 【Dimensional Accuracy】1.75mm filament, diameter variance of no more than 30 microns for consistent feeding and better 3D prints.
  • 【Smootly Print】AMOLEN engineered its Professional 3D Printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation with your 3D printer and superior results. AMOLEN 1.75mm PLA filament features good shaping, no bubble, no jamming, no warping.
  • 【High Performance】Orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder. AMOLEN PLA filament is the choice of engineers, designers, and anyone else into 3D printing who demands the best.
Latest Printrbot plus 3d printer
Flashforge 10745 3D Printer Creator Pro Dual Extruder Printer with Optimized Build Plate and Upgraded Spool Holder
  • Structural stability guarantees the steady high-speed and high-precision printing
  • Fully-covered body, removable cover to meet the temperature requirements of different filaments
  • Patented extruder structure, optimized for flexible and normal filament, compatible with other filament in the market
  • Open-source software, compatible with different slicing engines, support multiple printing formats
  • Flash print is able to slice complex model, "Cut", "2D-3D sculpture printing" function added...
Latest Printrbot plus 3d printer
Stronghero3D Desktop FDM 3D Printer Filament PLA Red 1.75 mm 1 kg (2.2 lbs) Dimension Accuracy of +/- 0.05 mm for Ender3 Cr10
  • Toughness plus = Strongheor3D PLA plus, not as brittle as normal PLA. Better toughness, brighter colour, higher strength, lower shrinkage, lower warping; filament easier to print and odourless, resulting in good printing results. 
  • 1.75 mm 1 kg vacuum packaging PLA + filament 1 kg spool 1.75 mm filament PLA in vacuum packaging. All filaments are vacuum sealed together with a desiccant pack. In this way, you can easily keep your 3D printer filaments in optimal storage condition and free from dust or dirt before opening the vacuum sealed packaging. 
  • Good layer adhesion and no clogging. 3D printing material. Better flow, no clogging. Premium 1.75 mm PLA filament. It has a constant diameter and uniform roundness, less threads and warps as well as a strong layer adhesion. Article free and free from impurities. No impurities, no clogging. 
  • High precision +/- 0.05mm tolerance: 1.75mm PLA + 3D filament (tolerance level: ± 0.05mm) Full 1 kg 3D printer filament roll, perfect roundness and very tight diameter tolerance, approx. 325 m filament on each spool, easy operation, minimal warping, no clogging, no bubbles. Increase the delicacy of your 3D printing objects. 
  • High compatibility and 100% environmental materialCompatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D Pen Environmental protection made from starch materials from renewable raw materials.
Latest Printrbot plus 3d printer
ANYCUBIC 3D Printer Mega S All Metal Frame and Updated Extruder, FDM DIY Printer Works, Free Test Filament with TPU/PLA/ABS Printing Size 210x210x205mm
  • Qucik Assembly: 3 steps to set up/assembled the Mega s printer with fix 8 screws within minutes not only to an expert user but also to beginner
  • Powerful Extruder: Anycubic mega s updated extruder greatly reduces the risk of clogged nozzle and bad extrusion to provide a better printing experience of flexible
  • Filament Sensor: Automatic printing pause when filament runs out, resume after filament re-load with just one click
  • Ultrabase Platform: 3D printer platform is covered a layer of patented microporous to provide excellent adhesion. And easy to take off the model from the platform after it cool down
  • Suspended Filament Rack: 3D fdm printer One-piece hanging design makes the feeding of filament more smoother, save space and more convenient
Latest Printrbot plus 3d printer
3DLAC plus 3D Printer Adhesive & Anti-Warping Spray
  • Antiwarping spray
  • Helps prints adhere to the build surface
  • Allows for easy removal of prints once bed has cooled
  • Spray middle of the build surface from 20cm
  • Works with PLA/ABS & vast majority of materials

Promotions and Deals (UK) 2021

During the year there are many promotions on products for sale online and Printrbot plus 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Printrbot plus 3d printer which are among the cheapest on the market. Just scroll through the list to find Printrbot plus 3d printer the cheapest products.

2021 Catalog

The product Printrbot plus 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented. Printrbot plus 3d printer is included in the 2021 catalog presentation along with the family of products belonging to the Brand. The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Printrbot plus 3d printer New
Stronghero3D Desktop FDM 3D Printer Filament PLA Blue 1.75 mm 1 kg (2.2 lbs) Dimension Accuracy of +/- 0.05 mm for Ender3 Cr10
  • Toughness plus = Strongheor3D PLA plus, not as brittle as normal PLA. Better toughness, brighter colour, higher strength, lower shrinkage, lower warping; filament easier to print and odourless, resulting in good printing results. 
  • 1.75 mm 1 kg vacuum packaging PLA + filament 1 kg spool 1.75 mm filament PLA in vacuum packaging. All filaments are vacuum sealed together with a desiccant pack. In this way, you can easily keep your 3D printer filaments in optimal storage condition and free from dust or dirt before opening the vacuum sealed packaging. 
  • Good layer adhesion and no clogging. 3D printing material. Better flow, no clogging. Premium 1.75 mm PLA filament. It has a constant diameter and uniform roundness, less threads and warps as well as a strong layer adhesion. Article free and free from impurities. No impurities, no clogging. 
  • High precision +/- 0.05mm tolerance: 1.75mm PLA + 3D filament (tolerance level: ± 0.05mm) Full 1 kg 3D printer filament roll, perfect roundness and very tight diameter tolerance, approx. 325 m filament on each spool, easy operation, minimal warping, no clogging, no bubbles. Increase the delicacy of your 3D printing objects. 
  • High compatibility and 100% environmental materialCompatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D Pen Environmental protection made from starch materials from renewable raw materials.
Printrbot plus 3d printer New
Xpork PLA+ Filament 1.75mm PLA Plus 3D Printer Filament Dimensional Accuracy +/- 0.03mm 1KG (2.2 LBS) Spool 3D Printing Filament for 3D Printers Black
  • 【No wrapping and no blocking】Total length: 340-350m. A complete 1KG 3D printer filament spool, perfect roundness and very close diameter tolerance, will not overlap or entangle. It melts well, feeds smoothly and continuously without clogging the nozzle or extruder.
  • [Environmental protection material] PLA+ is improved and upgraded on the basis of PLA, with high strength and toughness. The eSUN filament is made of pure materials, biodegradable, environmentally friendly, non-toxic, low odor, and no harm to users and the environment.
  • [High compatibility] Compatible with most FDM 3D printers using 1.75MM filament,
  • [Vacuum sealed packaging] Net weight: 1KG. The eSUN filament is packed in a sealed vacuum bag with a desiccant bag to keep it dry, prevent dust and foreign matter from entering, prevent nozzle jams and produce a smooth 3D model.
  • [Dimensions tolerance +/- 0.03mm] The smallest tolerance and low warpage to ensure consistent paper feeding and stable printing, no clogging, high success rate, so that the printed parts have excellent surface finish and high Accuracy.
Printrbot plus 3d printer New
PLA Filament For 3D Printer 1.75mm 1kg Spool Printing Material, Vacuum Packaging, Orange PLA
  • The smallest tolerance and low warpage, size tolerance +/- 0.02mm to ensure consistent paper feeding and stable printing, no clogging, high success rate, so that the printed parts have excellent surface finish and high precision.
  • Total length: 340-350m. A complete 1KG 3D printer filament spool, perfect roundness and very close diameter tolerance, will not overlap or entangle. It melts well, feeds smoothly and continuously without clogging the nozzle or extruder.
  • PLA has high strength and toughness. The filament is made of pure materials, biodegradable, environmentally friendly, non-toxic, low odor, and no harm to users and the environment.
  • Compatible with most FDM 3D printers using 1.75MM filament, such as: Prusa, Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Aleph Objects, Makergear, Up, Lulzbot, Simplify3D, Flashforge, etc.
  • Net weight: 1KG filament is packed in a sealed vacuum bag with a desiccant bag to keep it dry, prevent dust and foreign matter from entering, prevent nozzle jams and produce a smooth 3D model.
Printrbot plus 3d printer New
Aibecy Dual Print Head Extruder Full Kit, with 0.4mm Brass Nozzle, for 1.75mm Filament, Compatible with Ultimaker2 DIY Model 3D Printer
  • 100% brand new high quality accessories for 3D printer.
  • High-quality linear bearing, classic cross shaft slide design, smooth sliding.
  • High expansibility, can install double cooling air duct.
  • Improve thick wall PTFE parts, more reliable and durable.
  • Compatible with Ultimaker2 and cross-axis 3D printers.
Printrbot plus 3d printer New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Printrbot plus 3d printer New
Comgrow Creality Ender 3 Max FDM 3D Printer with Silent Mainboard Meanwell Power Supply Carborundum Glass Platform Large Print Size 300x300x400mm
  • Meanwell Power Supply: The powerful 350W power supply can be adjusted to adapt the voltage from 100V to 240V. Safe to use, and powerful in heating up.
  • Silent Mainboard: Ender 3 Max adopt the German import TMC2208 chip driver. It is effective to reduce the motor noise and shake that brings a comfortable and silent work environment for you.
  • Carborundum Glass Platform: With its superiority in heat resistance and surface flatness, the Carborundum glass platform helps prints adhere better and users remove prints easier. No wrapping and no scratches.
  • Dual Cooling Fans: The axial cooling fan continuously helps hotend heat dissipation. The double blower fans promote quick cooling on the extruded filament. Always deliver fine results.
  • All Metal Extruder: All-metal Bowden extruder is powerful in filament feed-in.
Printrbot plus 3d printer New
FlashForge 3D Printer Creator Pro, Metal Frame Structure, Acrylic Covers, Optimized Build Platform, Dual Extruder W/2 Spools, Works with ABS and PLA
  • Patented dual extruder – Support dual color print and dual material print. And better quality by using cooling fan.
  • Heating bed – Rapid steady heating prevent model warping much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG,TPU etc.
  • Open source software – Support mutiple printing formats and compatible with different slicing engines ,eg:Simplify3D,ReplicatorG,Makerware,Slic3r,Skeinforge,Cura.
  • Out of box – Creator Pro is suitable for industrial design,tool design,architecture designer,mechanical designer etc.
  • What you get – Flashforge 3d printer Creator Pro12 months warranty, lifetime technical assistance and 24 hours professional customer service.
Printrbot plus 3d printer New
ANYCUBIC 3D Printer 4max Pro Large Build Volume, FDM DIY Printer Works with ABS,TPU,PLA,HIPS 454mm×466mm×410mm
  • Large Build Volume With Hassle-Free Assembly: A fully pre-assembled machine allows you get stared quickly. 270mm(L)×210(W) ×190mm(H), big size for you limitless imagination.
  • Industrial-Grade Components for Superior Print: Quality Integrated sheet metal structure to enhance the stability when printing Z-axis double graphite bearing reduces the lag and improves the printing accuracy self-lubricating anti abrasive smooth
  • Dual Gear Extrusion Mechanism: Optimized extrusion torque and path orientation. Compatible with flexible filaments like TPU.
  • Ultra-quiet TMC2208 stepper drivers: significantly reduces noise while printing (< 50 decibels)
  • Resume Print & Filament Sensor: Resume from power loss feature allows the printer to resume printing automatically after a power cut
Printrbot plus 3d printer New
SHENLIJUAN 3D Printer CR-10 V3 With BL Touch Auto-Level Touch Screen Large Build Volume 3D Printer 300mmx300mmx400mm With Capricorn PTFE 2020 Newest Printer
  • Strong Compatibility Auto & Manual Leveling:BL touch (Auto Leveling Device) can be added by yourself,enjoying more fun of DIY your own 3d printer.
  • Dual Port Fan Cooling Plenum:Dual-port cooling fan extruder, Evenly heat- dissipated and coaling dawn immediately. reducing plugging and poor- spillage ensures models with high quality.
  • A New Tough All Metal Frame: High quality V Profile selected, more stable without any vibration,smoothly printed-out with high accuracy.
  • Upgraded Ultra Silent Mother Board: Self-developed Industrial-grade Motherboard and TMC2208 Utra Silent Drive are adopted /Cost-effective /Running more stable/ Noise reduction /Compression resistance.

Where to buy?

If you are asking yourself where to buy Printrbot plus 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Printrbot plus 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Stores In a physical store instead you can try the product with your own hands, you can directly see Printrbot plus 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Printrbot plus 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Printrbot plus 3d printer used.

Promo Codes 2021

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Printrbot plus 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

Stronghero3D Desktop FDM 3D Printer Filament PLA Blue 1.75 mm 1 kg (2.2 lbs) Dimension Accuracy of +/- 0.05 mm for Ender3 Cr10
  • Toughness plus = Strongheor3D PLA plus, not as brittle as normal PLA. Better toughness, brighter colour, higher strength, lower shrinkage, lower warping; filament easier to print and odourless, resulting in good printing results. 
  • 1.75 mm 1 kg vacuum packaging PLA + filament 1 kg spool 1.75 mm filament PLA in vacuum packaging. All filaments are vacuum sealed together with a desiccant pack. In this way, you can easily keep your 3D printer filaments in optimal storage condition and free from dust or dirt before opening the vacuum sealed packaging. 
  • Good layer adhesion and no clogging. 3D printing material. Better flow, no clogging. Premium 1.75 mm PLA filament. It has a constant diameter and uniform roundness, less threads and warps as well as a strong layer adhesion. Article free and free from impurities. No impurities, no clogging. 
  • High precision +/- 0.05mm tolerance: 1.75mm PLA + 3D filament (tolerance level: ± 0.05mm) Full 1 kg 3D printer filament roll, perfect roundness and very tight diameter tolerance, approx. 325 m filament on each spool, easy operation, minimal warping, no clogging, no bubbles. Increase the delicacy of your 3D printing objects. 
  • High compatibility and 100% environmental materialCompatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D Pen Environmental protection made from starch materials from renewable raw materials.
ANYCUBIC 3D Printer 4max Pro Large Build Volume, FDM DIY Printer Works with ABS,TPU,PLA,HIPS 454mm×466mm×410mm
  • Large Build Volume With Hassle-Free Assembly: A fully pre-assembled machine allows you get stared quickly. 270mm(L)×210(W) ×190mm(H), big size for you limitless imagination.
  • Industrial-Grade Components for Superior Print: Quality Integrated sheet metal structure to enhance the stability when printing Z-axis double graphite bearing reduces the lag and improves the printing accuracy self-lubricating anti abrasive smooth
  • Dual Gear Extrusion Mechanism: Optimized extrusion torque and path orientation. Compatible with flexible filaments like TPU.
  • Ultra-quiet TMC2208 stepper drivers: significantly reduces noise while printing (< 50 decibels)
  • Resume Print & Filament Sensor: Resume from power loss feature allows the printer to resume printing automatically after a power cut
PLA Filament For 3D Printer 1.75mm 1kg Spool Printing Material, Vacuum Packaging, Orange PLA
  • The smallest tolerance and low warpage, size tolerance +/- 0.02mm to ensure consistent paper feeding and stable printing, no clogging, high success rate, so that the printed parts have excellent surface finish and high precision.
  • Total length: 340-350m. A complete 1KG 3D printer filament spool, perfect roundness and very close diameter tolerance, will not overlap or entangle. It melts well, feeds smoothly and continuously without clogging the nozzle or extruder.
  • PLA has high strength and toughness. The filament is made of pure materials, biodegradable, environmentally friendly, non-toxic, low odor, and no harm to users and the environment.
  • Compatible with most FDM 3D printers using 1.75MM filament, such as: Prusa, Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Aleph Objects, Makergear, Up, Lulzbot, Simplify3D, Flashforge, etc.
  • Net weight: 1KG filament is packed in a sealed vacuum bag with a desiccant bag to keep it dry, prevent dust and foreign matter from entering, prevent nozzle jams and produce a smooth 3D model.
Aibecy Dual Print Head Extruder Full Kit, with 0.4mm Brass Nozzle, for 1.75mm Filament, Compatible with Ultimaker2 DIY Model 3D Printer
  • 100% brand new high quality accessories for 3D printer.
  • High-quality linear bearing, classic cross shaft slide design, smooth sliding.
  • High expansibility, can install double cooling air duct.
  • Improve thick wall PTFE parts, more reliable and durable.
  • Compatible with Ultimaker2 and cross-axis 3D printers.
Comgrow Creality Ender 3 Max FDM 3D Printer with Silent Mainboard Meanwell Power Supply Carborundum Glass Platform Large Print Size 300x300x400mm
  • Meanwell Power Supply: The powerful 350W power supply can be adjusted to adapt the voltage from 100V to 240V. Safe to use, and powerful in heating up.
  • Silent Mainboard: Ender 3 Max adopt the German import TMC2208 chip driver. It is effective to reduce the motor noise and shake that brings a comfortable and silent work environment for you.
  • Carborundum Glass Platform: With its superiority in heat resistance and surface flatness, the Carborundum glass platform helps prints adhere better and users remove prints easier. No wrapping and no scratches.
  • Dual Cooling Fans: The axial cooling fan continuously helps hotend heat dissipation. The double blower fans promote quick cooling on the extruded filament. Always deliver fine results.
  • All Metal Extruder: All-metal Bowden extruder is powerful in filament feed-in.
Xpork PLA+ Filament 1.75mm PLA Plus 3D Printer Filament Dimensional Accuracy +/- 0.03mm 1KG (2.2 LBS) Spool 3D Printing Filament for 3D Printers Black
  • 【No wrapping and no blocking】Total length: 340-350m. A complete 1KG 3D printer filament spool, perfect roundness and very close diameter tolerance, will not overlap or entangle. It melts well, feeds smoothly and continuously without clogging the nozzle or extruder.
  • [Environmental protection material] PLA+ is improved and upgraded on the basis of PLA, with high strength and toughness. The eSUN filament is made of pure materials, biodegradable, environmentally friendly, non-toxic, low odor, and no harm to users and the environment.
  • [High compatibility] Compatible with most FDM 3D printers using 1.75MM filament,
  • [Vacuum sealed packaging] Net weight: 1KG. The eSUN filament is packed in a sealed vacuum bag with a desiccant bag to keep it dry, prevent dust and foreign matter from entering, prevent nozzle jams and produce a smooth 3D model.
  • [Dimensions tolerance +/- 0.03mm] The smallest tolerance and low warpage to ensure consistent paper feeding and stable printing, no clogging, high success rate, so that the printed parts have excellent surface finish and high Accuracy.
FlashForge 3D Printer Creator Pro, Metal Frame Structure, Acrylic Covers, Optimized Build Platform, Dual Extruder W/2 Spools, Works with ABS and PLA
  • Patented dual extruder – Support dual color print and dual material print. And better quality by using cooling fan.
  • Heating bed – Rapid steady heating prevent model warping much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG,TPU etc.
  • Open source software – Support mutiple printing formats and compatible with different slicing engines ,eg:Simplify3D,ReplicatorG,Makerware,Slic3r,Skeinforge,Cura.
  • Out of box – Creator Pro is suitable for industrial design,tool design,architecture designer,mechanical designer etc.
  • What you get – Flashforge 3d printer Creator Pro12 months warranty, lifetime technical assistance and 24 hours professional customer service.

Others Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Printrbot plus 3d printer.

Rating: 3.33 of 5 - 30 votes
1 Star2 Stars3 Stars4 Stars5 Stars (30 votes, average: 3.33 out of 5)
Loading...