Printinz plate 3d printer bed upgrade Reviews and Best Deals

Online product reviews and comparisons for Printinz plate 3d printer bed upgrade.

Latest Printinz plate 3d printer bed upgrade
Latest Printinz plate 3d printer bed upgrade
Toaiot 3D Printer 235x235mm/9.2x9.2 inch Gold Double Sided Textured PEI Powder Coated Spring Steel Build Plate Steel Sheet for Ender 3/ Ender 3 Pro/Ender 3X with Magnetic Platform Side B
  • Newly upgraded PEI coated steel plate,gift:Magnetic Platform Side B
  • Size: 235mm x 235mm/9.2x9.2 inch,With Ender 3/Ender 3 Pro/Ender 3X Compatible.
  • It's spring steel sheet and PEI 2 in 1 item, made of high strength spring steel sheet with pei powder coat. No more PEI sheet replacement, no more 3M masking tape, no more abs juice, no more glue stick.
  • Easy to install, easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc.
  • If you need black powder PEI coated steel plate, please search ASIN:B08LVJPJBY, If you need to stick PEI spring steel plate, please search for ASIN:B08D77MFX6.
Latest Printinz plate 3d printer bed upgrade
Creality 3D Printer Ender 3 Hotbed Glass Build Plate 235x235x3mm for Ender 3 Pro, Ender 5 Heated Bed Platform Surface
  • Size: length and width are 235*235mm. It is specially designed for Creality Creality Ender 3, Ender 3 Pro, Ender 5, Ender 3X.
  • High performance: Silicon carbide glass has chemical stability, a high coefficient of thermal conductivity, good wear resistance and can withstand extreme temperatures.
  • Reliability: The special coating is inorganic, with a hardness of 8 Moh and a heat resistance up to 400.
  • Excellent adhesion: The glass plate covered by microporous coating , has a strong adhesion during printing. Easy to remove models by hand or with a little help from the squeegee.
  • Good fit: The glass plate can fit the heated bed effectively, super flatness, fast and uniform heating.
Latest Printinz plate 3d printer bed upgrade
Upgrade 3D Printer Platform 235x235mm, Sovol Magnetic Flexible Steel Plate Heated Bed with Build Surface Sticker for Ender 3 Ender 3 pro Ender-5 Ender-5 Pro CR-20 CR-20 Pro
  • Flexible, removable, can stick to magnetics very well. High strength and heat resistance. Say goodbye to all those removal tools, spatulas, and knives. Compatible with PLA、PETG、TPU. It can be heated up to 110*C.
  • The upper flexible removed build surface designed with model removal in mind. It is replacable, make the whole platform kit lasting long time than PEI coating bed.
  • The stainless steel plate with flexibility and tenacity in the middle makes it easier to remove the prints, flex slightly to pop your print right off.
  • The lower magnetic base comes with 3M adhesive surface, can fixed on the hot bed. No more tape, no more glue, and release your printing anxiety.
  • SIMPLE INSTALLATION - Build surface and the stainless steel plate comes together. Just place them on the magnetic base and place 3M adhesive surface of magnetic base on top of normal build plate.
Latest Printinz plate 3d printer bed upgrade
Sovol Creality 3D Original Replacement 3D Printer Build Surface Plate for Ender-3 3D Printer 235X235MM (Pack of 4)
  • This original ender 3 build surface fits perfectly, it gives a perfect size for the perfectly flat bed of the printer
  • The Build sheet make it easier to adhere the filament to the heated bed when printing
  • Size: 235 x 235 mm, Suitable for Creality 3D Printer Ender 3, Ender 3X, Ender 3 Pro, Ender 5, CR 20
  • Compatible with 1.75 mm Filament PLA, ABS, HIPS, PETG, TPE, NYLON, PC, RETT
  • Printing surface is frosting treatment, and can be reused for many times. 4 pieces heat bed surface plate in total
Latest Printinz plate 3d printer bed upgrade
Tresbro Upgraded Creality 3D Printer Platforms Tempered Glass Heated Bed Glass Plate Build Surface Build Plate 235x235x4mm for Ender 3 Hot Bed
  • Excellent adhension.Our state of the art carbon and silicone build surface provides the best adhesion in the market. It has a nice texture on surface that helps with bed adhesion. As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those prints with difficult warping issues.Not suitable for ABS
  • Very easy to take off the models.When the print platform cools down, you can grab a complete small model without borrowing any tools. Large models can be easily removed using tools such as a blade.No more scrathch or stab yourself with a scraper again.
  • Completely flat. A lot of Ender 3 owners complain about warped beds. This heated bed platform solves that problem once and for all.It's a nice upgrade to the original aluminum base of the print surface.It level things out if there is any minor warping going on there.
  • Very durable.The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400ºC
  • Update design. After scan many negtive review of the old version.We have update our design.We print small logo in the bottom instead of the big CREALITY logo in the middle to avoid the printes be impinted with the CREALITY logo. After design update,the prints will have a smoother finished on the finished part.
Latest Printinz plate 3d printer bed upgrade
Tresbro Creality 3D Printer Magnetic Bed Flexible Magnetic Hot Bed Sticker Original Removeable Build Surface Platform for Ender 3 Ender 3 Pro
  • Size:235mm×235mm, suitable for Creality Ender 3, Ender 3X, Ender-3 Pro, CR20 3d printer
  • Suitable for PLA and PLA-based materials,not for use with high-temperature printing applications above 70℃.
  • All New Functionality: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
  • Easy Removal Sheet: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
  • Simple Installation: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
Latest Printinz plate 3d printer bed upgrade
Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version
  • DURABLE, RIGID CONSTRUCTION; No more repurposed artist spatulas with spinning, twisting and turning cramp rings!
  • PRACTICAL BUT TENDER; Gently slide underneath prints with ease to protect the build bed surface yet with a good reach
  • OPTIMUM FLEXIBILITY; Flexible but not too thin or flimsy - not dull and rigid like the putty knives for 3d printer bed
  • STYLISH & VERSATILE; Offset spatula with a rubber comfort grip, knife has a thick wood handle suitable for larger parts
  • PROFESSIONAL ADDITION TO YOUR 3D PRINTER ACCESSORIES; 3D printer tool set for print removal of PLA, PLA+, ABS, PETG etc
Latest Printinz plate 3d printer bed upgrade
Toaiot 3D Printer 310x310mm/12.2x12.2 inch Gold Double Sided Textured PEI Powder Coated Spring Steel Build Plate Steel Sheet with Magnetic Platform Side B for CR10 CR10S
  • Newly upgraded PEI coated steel plate,gift:Magnetic Platform Side B.
  • Size: 310mm x 310mm/12.2x12.2 inch,With CR10 CR10S Compatible.
  • It's spring steel sheet and PEI 2 in 1 item, made of high strength spring steel sheet with pei powder coat. No more PEI sheet replacement, no more 3M masking tape, no more abs juice, no more glue stick.
  • Easy to install, easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc.
  • If you want to replace the magnetic B-base, look for this ASIN: B08FY9LR2G in our "liying" shop.

Buy Printinz plate 3d printer bed upgrade from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Printinz plate 3d printer bed upgrade, buy Printinz plate 3d printer bed upgrade directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Printinz plate 3d printer bed upgrade including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


Best
Tresbro Creality 3D Printer Magnetic Bed Flexible Magnetic Hot Bed Sticker Original Removeable Build Surface Platform for Ender 3 Ender 3 Pro
  • Size:235mm×235mm, suitable for Creality Ender 3, Ender 3X, Ender-3 Pro, CR20 3d printer
  • Suitable for PLA and PLA-based materials,not for use with high-temperature printing applications above 70℃.
  • All New Functionality: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
  • Easy Removal Sheet: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
  • Simple Installation: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
Best
Tresbro Upgraded Creality 3D Printer Platforms Tempered Glass Heated Bed Glass Plate Build Surface Build Plate 235x235x4mm for Ender 3 Hot Bed
  • Excellent adhension.Our state of the art carbon and silicone build surface provides the best adhesion in the market. It has a nice texture on surface that helps with bed adhesion. As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those prints with difficult warping issues.Not suitable for ABS
  • Very easy to take off the models.When the print platform cools down, you can grab a complete small model without borrowing any tools. Large models can be easily removed using tools such as a blade.No more scrathch or stab yourself with a scraper again.
  • Completely flat. A lot of Ender 3 owners complain about warped beds. This heated bed platform solves that problem once and for all.It's a nice upgrade to the original aluminum base of the print surface.It level things out if there is any minor warping going on there.
  • Very durable.The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400ºC
  • Update design. After scan many negtive review of the old version.We have update our design.We print small logo in the bottom instead of the big CREALITY logo in the middle to avoid the printes be impinted with the CREALITY logo. After design update,the prints will have a smoother finished on the finished part.
Best
Upgrade 3D Printer Platform 235x235mm, Sovol Magnetic Flexible Steel Plate Heated Bed with Build Surface Sticker for Ender 3 Ender 3 pro Ender-5 Ender-5 Pro CR-20 CR-20 Pro
  • Flexible, removable, can stick to magnetics very well. High strength and heat resistance. Say goodbye to all those removal tools, spatulas, and knives. Compatible with PLA、PETG、TPU. It can be heated up to 110*C.
  • The upper flexible removed build surface designed with model removal in mind. It is replacable, make the whole platform kit lasting long time than PEI coating bed.
  • The stainless steel plate with flexibility and tenacity in the middle makes it easier to remove the prints, flex slightly to pop your print right off.
  • The lower magnetic base comes with 3M adhesive surface, can fixed on the hot bed. No more tape, no more glue, and release your printing anxiety.
  • SIMPLE INSTALLATION - Build surface and the stainless steel plate comes together. Just place them on the magnetic base and place 3M adhesive surface of magnetic base on top of normal build plate.
Best
Sovol Creality 3D Ender 3 Ender 5 Tempered Glass Upgraded Build Plate Printing Surface for Heated Bed 235x235x3mm
  • Flatness – Creality Ender 3 Glass bed has a high modulus of elasticity and is thermally stable. Therefore, it remains flat and will ensure your bed’s leveling remains consistent throughout
  • Durability – Durable tempered glass will not easily shatter or crack when exposed to high strains because it is manufactured to be more tolerant. It rarely needs replacement because it hardly wears out and it can be used for several prints without the need for a replacement.
  • Thermal Conductivity – Low thermal conductivity means you have a thermally stable platform that will not be affected by sudden rises or drops in temperature. The glass bed keeping the print warm, leading to uniform shrinkage to prevent warping and to improve print quality.
  • Easy Removal - Once the print has finished, DO NOT immediately try to remove the model from the glass bed with force!! This glass bed must come down to room temperature for the advanced surface to "release" the model.
  • Easy Clean-up – Beds end up with grease, dust, and unwanted plastic fragments that result in an uneven print surface. Unlike most beds, it is easier to spot dirt on a glass platform because of its glossy nature. This makes it easier to clean a glass bed with acetone or a regular glass cleaner.
Best
Creality Upgraded 3D Printer Platform Glass Plate Panel 310X310MM Heated Bed Glass Print Bed Build Surface with Microporous Coating for for CR-10 CR-10S
  • 【Upgraded 3D Printers Glass Plate】:Creality upgraded carbon crystal tempered 3D Printers glass plate for CR-10 and CR-10S 3D printers
  • 【High Quality Material】: Special Glass + microporous coatings.Anti-scratch, high hardness,not easy to be broken,surface flatness is less than 0.2mm.Easy to clean with water or alcohol. Easy to remove your print by hand or with a scraper.
  • 【Excellent Adhesion】: The Creality 3d glass plate was covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models
  • 【High-performance/Durable add Reliability】: It Integrated with Heated Bed ,Super Flatness, Fast and uniform heating,and it is easy to clean with alcohol/water.The special coating is inorganic and has a hardness of 7- 8 Mohs, and it is capable to work at 400 ℃.
  • 【You should know】:1.The first layer has a hardness of 0.5H, which is easier to be scratched, but it does not affect the adhesion of the models. 2.Its color will be changed after rubbed repeatedly with alcohol, but will not affect its normal use. 3.Please do not touch the platform repeatedly by hand to avoid serious sweat

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Printinz plate 3d printer bed upgrade

Here is the ranking of the best Printinz plate 3d printer bed upgrade, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Printinz plate 3d printer bed upgrade and read the reviews left by real customers, see the Printinz plate 3d printer bed upgrade ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Printinz plate 3d printer bed upgrade New
235x235mm Build Surface Magnetic for Ender 3 Ender 3 v2 Build Plate Pei Sheet Bed Surface Eewolf
  • Compatible with Creality ender 3, ender 3 pro, ender 3 v2 3d printers ect.
  • Suggested filament: PLA, abs petg not supported.
  • Frosted surface makes it easier to adhere the filament to the build surface when printing.
  • Part A can be removed and bent which helps to remove the model easily.
  • Please note auto sensor could not detect the build surface directly as it’s not metal.
Printinz plate 3d printer bed upgrade New
Ctzrzyt 3D Printer Heated Bed Platform, 300x300mm New Flex Magnetic Bed Build Plate 2 In 1 For CR-10
  • Please Kindly Note: the plate is magnetic, the temperature (recommended from 50 to 80 degrees centigrade) should not exceed 80 degrees. so It is work well for PLA, not suitable for ABS filament, or the platform will comes bent . if set heated beyond 80 degree, it will lose magnetism or turn bent.
  • 2018 Upgrade 3D Printer Heatbed Plate Sheet: can install on a hoted bed and glass platform, fit for 11.81 inch*11.81 inch Printer Bed.
  • Product features:
  • 2 in 1 Plate: the A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models, B plate with adhesive, stick on the build surface.
  • Size: 300x300mm/ 11.81x11.81 inch
Printinz plate 3d printer bed upgrade New
3D Printer Build Surface 310 x 310mm for CR-10 CR-10S Anet E10 Platform 3PCS Eewolf
  •  [EASY TO INSTALL] Applying it was super simple, just peel and stick,and no bubbles, print adheres well
  •  [3D PRINTER BUILD SURFACE]: Please note the auto sensor could not detect the build surface directly as it’s not metal.
  •  [FULLY COMPATIBLY] Compatible with CR10 CR10S ANET E12 Wanhao i3 anet a8 ect.
  •  [REUSE & CUTTABLE] The 3D-printing build surface is a 310 x 310mm square sheet, reuse for multiple prints, just wipe down with is opropyl alcohol between prints for best results. This sheets can be cut down to desired size by scoring with a utility knife.
  •  [FILAMENT COMPATIBLE] PLA, PETG ect. (ABS not recommended)
Printinz plate 3d printer bed upgrade New
Printinz plate 3d printer bed upgrade New
Luntus 3D Printer Heated Bed Platform, 300x300mm New Flex Magnetic Bed Build Plate 2 In 1 For CR-10
  • 2018 Upgrade 3D Printer Heatbed Plate Sheet: can install on a hoted bed and glass platform, fit for 11.81 inch*11.81 inch Printer Bed.
  • Product features:
  • 2 in 1 Plate: the A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models, B plate with adhesive, stick on the build surface.
  • Please Kindly Note: the plate is magnetic, the temperature (recommended from 50 to 80 degrees centigrade) should not exceed 80 degrees. so It is work well for PLA, not suitable for ABS filament, or the platform will comes bent . if set heated beyond 80 degree, it will lose magnetism or turn bent.
  • Size: 300x300mm/ 11.81x11.81 inch
Printinz plate 3d printer bed upgrade New
SOOWAY 3D Printer Glass Plateform Print Bed Build Plate Surface Heated Bed Polymer Microporous Coating With Perfect Adhesion
  • 【High Surface Level】High quality glass with less than 0.1mm surface accuracy.
  • 【Polymer Microporous Surface】The polymer surface with microporous has a good adhesion to 3D printing materials such as PLA ABS PC NYLON PP PETG. And also easy to remove when it’s cool down.
  • 【High Quality Material】Tempered glass with polymer coating. Mohs hardness: 7, operating temperature: 350°C
  • 【Easy To Cleaning】The surface is easy to cleaning up with acetone or alcohol.
  • 【Warm Note】Please feel free to contact us for refund or replacement if there any issues, Thanks for choosing our 3D printer parts, have a nice day.
Printinz plate 3d printer bed upgrade New
Leeofty Magnetic Build Surface Plate Sticker Pad Ultra-Flexible Removable 310x310mm Compatible with 310mm 3D Printer Hotbed Heated Bed
  • Upgrade Magnet Build Surface Plate, sized 310*310mm/ 12.2 *12.2in, suitable for 3D printer heated beds with the same size.
  • Build surface comes with upper magnetic build surface and lower magnetic adhesive base, easy to use.
  • Simply stick the adhesive bottom plate onto the heat bed platform without edge warp, and no glue is needed, convenient to use.
  • Easy removal PLA and PLA-based materials from 3D printing platform, ensuring the bottom of your finished model delicate and no warping, and no need any scrapper.
  • Premium material, super flatness, fast and uniform heating, work at max. 70℃, and can be repeated usage for saving cost.
Printinz plate 3d printer bed upgrade New
Gaetooely 310mm New Upgrade Removal Spring Steel Sheet Pre-Applied PEI Magnetic Base For Ender 3 CR-10 CR-10S 3D Printer Hot Bed
  • 3.Suitable for almost all filaments. PLA, ABS, PC, etc
  • 1.Flexible, Removable, stick to magnets very well, Never warp& Never rust.
  • 2.Magnetic base can stand the high temp at 130℃ without losing magnetism.
  • 4.Fast heater performance, less waiting time after printing.
Printinz plate 3d printer bed upgrade New
3D Printer Spring Steel Sheet-Spring Steel Sheet PEI with 3D Printer Magnetic Back Plate for Ender‑3/CR10 Series 310x310mm
  • The first layer is succinite color and glossy surface PEI film, good adhesion to various printing materials, especially PLA and ABS, high temperature resistance of 260℃
  • Spring steel plate second layer. Spring steel is a steel specially used to make springs and elastic components, come with the ability of elastic deformation, which is difficult to permanently deform by human power
  • Soft magnetic rubber base with soft texture, good magnetism and temperature resistance, with adhesive can be directly attached to the heatbed platform
  • Strong surface adhesion, cold printing can be achieved without glue needed, and the printed product has a glossy bottom surface
  • Combination of magnetic steel, which is easy to take mold by gently bending steel plate

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Printinz plate 3d printer bed upgrade. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Printinz plate 3d printer bed upgrade give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

Gaetooely 310mm New Upgrade Removal Spring Steel Sheet Pre-Applied PEI Magnetic Base For Ender 3 CR-10 CR-10S 3D Printer Hot Bed
  • 3.Suitable for almost all filaments. PLA, ABS, PC, etc
  • 1.Flexible, Removable, stick to magnets very well, Never warp& Never rust.
  • 2.Magnetic base can stand the high temp at 130℃ without losing magnetism.
  • 4.Fast heater performance, less waiting time after printing.
235x235mm Build Surface Magnetic for Ender 3 Ender 3 v2 Build Plate Pei Sheet Bed Surface Eewolf
  • Compatible with Creality ender 3, ender 3 pro, ender 3 v2 3d printers ect.
  • Suggested filament: PLA, abs petg not supported.
  • Frosted surface makes it easier to adhere the filament to the build surface when printing.
  • Part A can be removed and bent which helps to remove the model easily.
  • Please note auto sensor could not detect the build surface directly as it’s not metal.
Leeofty Magnetic Build Surface Plate Sticker Pad Ultra-Flexible Removable 310x310mm Compatible with 310mm 3D Printer Hotbed Heated Bed
  • Upgrade Magnet Build Surface Plate, sized 310*310mm/ 12.2 *12.2in, suitable for 3D printer heated beds with the same size.
  • Build surface comes with upper magnetic build surface and lower magnetic adhesive base, easy to use.
  • Simply stick the adhesive bottom plate onto the heat bed platform without edge warp, and no glue is needed, convenient to use.
  • Easy removal PLA and PLA-based materials from 3D printing platform, ensuring the bottom of your finished model delicate and no warping, and no need any scrapper.
  • Premium material, super flatness, fast and uniform heating, work at max. 70℃, and can be repeated usage for saving cost.
3D Printer Build Surface 310 x 310mm for CR-10 CR-10S Anet E10 Platform 3PCS Eewolf
  •  [EASY TO INSTALL] Applying it was super simple, just peel and stick,and no bubbles, print adheres well
  •  [3D PRINTER BUILD SURFACE]: Please note the auto sensor could not detect the build surface directly as it’s not metal.
  •  [FULLY COMPATIBLY] Compatible with CR10 CR10S ANET E12 Wanhao i3 anet a8 ect.
  •  [REUSE & CUTTABLE] The 3D-printing build surface is a 310 x 310mm square sheet, reuse for multiple prints, just wipe down with is opropyl alcohol between prints for best results. This sheets can be cut down to desired size by scoring with a utility knife.
  •  [FILAMENT COMPATIBLE] PLA, PETG ect. (ABS not recommended)
Ctzrzyt 3D Printer Heated Bed Platform, 300x300mm New Flex Magnetic Bed Build Plate 2 In 1 For CR-10
  • Please Kindly Note: the plate is magnetic, the temperature (recommended from 50 to 80 degrees centigrade) should not exceed 80 degrees. so It is work well for PLA, not suitable for ABS filament, or the platform will comes bent . if set heated beyond 80 degree, it will lose magnetism or turn bent.
  • 2018 Upgrade 3D Printer Heatbed Plate Sheet: can install on a hoted bed and glass platform, fit for 11.81 inch*11.81 inch Printer Bed.
  • Product features:
  • 2 in 1 Plate: the A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models, B plate with adhesive, stick on the build surface.
  • Size: 300x300mm/ 11.81x11.81 inch

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Printinz plate 3d printer bed upgrade actually costs.

Latest Printinz plate 3d printer bed upgrade
Latest Printinz plate 3d printer bed upgrade
Toaiot 3D Printer 235x235mm/9.2x9.2 inch Gold Double Sided Textured PEI Powder Coated Spring Steel Build Plate Steel Sheet for Ender 3/ Ender 3 Pro/Ender 3X with Magnetic Platform Side B
  • Newly upgraded PEI coated steel plate,gift:Magnetic Platform Side B
  • Size: 235mm x 235mm/9.2x9.2 inch,With Ender 3/Ender 3 Pro/Ender 3X Compatible.
  • It's spring steel sheet and PEI 2 in 1 item, made of high strength spring steel sheet with pei powder coat. No more PEI sheet replacement, no more 3M masking tape, no more abs juice, no more glue stick.
  • Easy to install, easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc.
  • If you need black powder PEI coated steel plate, please search ASIN:B08LVJPJBY, If you need to stick PEI spring steel plate, please search for ASIN:B08D77MFX6.
Latest Printinz plate 3d printer bed upgrade
Creality 3D Printer Ender 3 Hotbed Glass Build Plate 235x235x3mm for Ender 3 Pro, Ender 5 Heated Bed Platform Surface
  • Size: length and width are 235*235mm. It is specially designed for Creality Creality Ender 3, Ender 3 Pro, Ender 5, Ender 3X.
  • High performance: Silicon carbide glass has chemical stability, a high coefficient of thermal conductivity, good wear resistance and can withstand extreme temperatures.
  • Reliability: The special coating is inorganic, with a hardness of 8 Moh and a heat resistance up to 400.
  • Excellent adhesion: The glass plate covered by microporous coating , has a strong adhesion during printing. Easy to remove models by hand or with a little help from the squeegee.
  • Good fit: The glass plate can fit the heated bed effectively, super flatness, fast and uniform heating.
Latest Printinz plate 3d printer bed upgrade
Upgrade 3D Printer Platform 235x235mm, Sovol Magnetic Flexible Steel Plate Heated Bed with Build Surface Sticker for Ender 3 Ender 3 pro Ender-5 Ender-5 Pro CR-20 CR-20 Pro
  • Flexible, removable, can stick to magnetics very well. High strength and heat resistance. Say goodbye to all those removal tools, spatulas, and knives. Compatible with PLA、PETG、TPU. It can be heated up to 110*C.
  • The upper flexible removed build surface designed with model removal in mind. It is replacable, make the whole platform kit lasting long time than PEI coating bed.
  • The stainless steel plate with flexibility and tenacity in the middle makes it easier to remove the prints, flex slightly to pop your print right off.
  • The lower magnetic base comes with 3M adhesive surface, can fixed on the hot bed. No more tape, no more glue, and release your printing anxiety.
  • SIMPLE INSTALLATION - Build surface and the stainless steel plate comes together. Just place them on the magnetic base and place 3M adhesive surface of magnetic base on top of normal build plate.
Latest Printinz plate 3d printer bed upgrade
Sovol Creality 3D Original Replacement 3D Printer Build Surface Plate for Ender-3 3D Printer 235X235MM (Pack of 4)
  • This original ender 3 build surface fits perfectly, it gives a perfect size for the perfectly flat bed of the printer
  • The Build sheet make it easier to adhere the filament to the heated bed when printing
  • Size: 235 x 235 mm, Suitable for Creality 3D Printer Ender 3, Ender 3X, Ender 3 Pro, Ender 5, CR 20
  • Compatible with 1.75 mm Filament PLA, ABS, HIPS, PETG, TPE, NYLON, PC, RETT
  • Printing surface is frosting treatment, and can be reused for many times. 4 pieces heat bed surface plate in total
Latest Printinz plate 3d printer bed upgrade
Tresbro Upgraded Creality 3D Printer Platforms Tempered Glass Heated Bed Glass Plate Build Surface Build Plate 235x235x4mm for Ender 3 Hot Bed
  • Excellent adhension.Our state of the art carbon and silicone build surface provides the best adhesion in the market. It has a nice texture on surface that helps with bed adhesion. As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those prints with difficult warping issues.Not suitable for ABS
  • Very easy to take off the models.When the print platform cools down, you can grab a complete small model without borrowing any tools. Large models can be easily removed using tools such as a blade.No more scrathch or stab yourself with a scraper again.
  • Completely flat. A lot of Ender 3 owners complain about warped beds. This heated bed platform solves that problem once and for all.It's a nice upgrade to the original aluminum base of the print surface.It level things out if there is any minor warping going on there.
  • Very durable.The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400ºC
  • Update design. After scan many negtive review of the old version.We have update our design.We print small logo in the bottom instead of the big CREALITY logo in the middle to avoid the printes be impinted with the CREALITY logo. After design update,the prints will have a smoother finished on the finished part.
Latest Printinz plate 3d printer bed upgrade
Tresbro Creality 3D Printer Magnetic Bed Flexible Magnetic Hot Bed Sticker Original Removeable Build Surface Platform for Ender 3 Ender 3 Pro
  • Size:235mm×235mm, suitable for Creality Ender 3, Ender 3X, Ender-3 Pro, CR20 3d printer
  • Suitable for PLA and PLA-based materials,not for use with high-temperature printing applications above 70℃.
  • All New Functionality: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
  • Easy Removal Sheet: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
  • Simple Installation: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
Latest Printinz plate 3d printer bed upgrade
Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version
  • DURABLE, RIGID CONSTRUCTION; No more repurposed artist spatulas with spinning, twisting and turning cramp rings!
  • PRACTICAL BUT TENDER; Gently slide underneath prints with ease to protect the build bed surface yet with a good reach
  • OPTIMUM FLEXIBILITY; Flexible but not too thin or flimsy - not dull and rigid like the putty knives for 3d printer bed
  • STYLISH & VERSATILE; Offset spatula with a rubber comfort grip, knife has a thick wood handle suitable for larger parts
  • PROFESSIONAL ADDITION TO YOUR 3D PRINTER ACCESSORIES; 3D printer tool set for print removal of PLA, PLA+, ABS, PETG etc
Latest Printinz plate 3d printer bed upgrade
Toaiot 3D Printer 310x310mm/12.2x12.2 inch Gold Double Sided Textured PEI Powder Coated Spring Steel Build Plate Steel Sheet with Magnetic Platform Side B for CR10 CR10S
  • Newly upgraded PEI coated steel plate,gift:Magnetic Platform Side B.
  • Size: 310mm x 310mm/12.2x12.2 inch,With CR10 CR10S Compatible.
  • It's spring steel sheet and PEI 2 in 1 item, made of high strength spring steel sheet with pei powder coat. No more PEI sheet replacement, no more 3M masking tape, no more abs juice, no more glue stick.
  • Easy to install, easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc.
  • If you want to replace the magnetic B-base, look for this ASIN: B08FY9LR2G in our "liying" shop.

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Printinz plate 3d printer bed upgrade could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Printinz plate 3d printer bed upgrade which are among the cheapest on the market. Just scroll through the list to find Printinz plate 3d printer bed upgrade the cheapest products.

Catalog

The product Printinz plate 3d printer bed upgrade can be found in the dedicated catalog where the entire list of products on sale is presented.

Printinz plate 3d printer bed upgrade is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Printinz plate 3d printer bed upgrade New
235x235mm Build Surface Magnetic for Ender 3 Ender 3 v2 Build Plate Pei Sheet Bed Surface Eewolf
  • Compatible with Creality ender 3, ender 3 pro, ender 3 v2 3d printers ect.
  • Suggested filament: PLA, abs petg not supported.
  • Frosted surface makes it easier to adhere the filament to the build surface when printing.
  • Part A can be removed and bent which helps to remove the model easily.
  • Please note auto sensor could not detect the build surface directly as it’s not metal.
Printinz plate 3d printer bed upgrade New
Ctzrzyt 3D Printer Heated Bed Platform, 300x300mm New Flex Magnetic Bed Build Plate 2 In 1 For CR-10
  • Please Kindly Note: the plate is magnetic, the temperature (recommended from 50 to 80 degrees centigrade) should not exceed 80 degrees. so It is work well for PLA, not suitable for ABS filament, or the platform will comes bent . if set heated beyond 80 degree, it will lose magnetism or turn bent.
  • 2018 Upgrade 3D Printer Heatbed Plate Sheet: can install on a hoted bed and glass platform, fit for 11.81 inch*11.81 inch Printer Bed.
  • Product features:
  • 2 in 1 Plate: the A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models, B plate with adhesive, stick on the build surface.
  • Size: 300x300mm/ 11.81x11.81 inch
Printinz plate 3d printer bed upgrade New
3D Printer Build Surface 310 x 310mm for CR-10 CR-10S Anet E10 Platform 3PCS Eewolf
  •  [EASY TO INSTALL] Applying it was super simple, just peel and stick,and no bubbles, print adheres well
  •  [3D PRINTER BUILD SURFACE]: Please note the auto sensor could not detect the build surface directly as it’s not metal.
  •  [FULLY COMPATIBLY] Compatible with CR10 CR10S ANET E12 Wanhao i3 anet a8 ect.
  •  [REUSE & CUTTABLE] The 3D-printing build surface is a 310 x 310mm square sheet, reuse for multiple prints, just wipe down with is opropyl alcohol between prints for best results. This sheets can be cut down to desired size by scoring with a utility knife.
  •  [FILAMENT COMPATIBLE] PLA, PETG ect. (ABS not recommended)
Printinz plate 3d printer bed upgrade New
Printinz plate 3d printer bed upgrade New
Luntus 3D Printer Heated Bed Platform, 300x300mm New Flex Magnetic Bed Build Plate 2 In 1 For CR-10
  • 2018 Upgrade 3D Printer Heatbed Plate Sheet: can install on a hoted bed and glass platform, fit for 11.81 inch*11.81 inch Printer Bed.
  • Product features:
  • 2 in 1 Plate: the A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models, B plate with adhesive, stick on the build surface.
  • Please Kindly Note: the plate is magnetic, the temperature (recommended from 50 to 80 degrees centigrade) should not exceed 80 degrees. so It is work well for PLA, not suitable for ABS filament, or the platform will comes bent . if set heated beyond 80 degree, it will lose magnetism or turn bent.
  • Size: 300x300mm/ 11.81x11.81 inch
Printinz plate 3d printer bed upgrade New
SOOWAY 3D Printer Glass Plateform Print Bed Build Plate Surface Heated Bed Polymer Microporous Coating With Perfect Adhesion
  • 【High Surface Level】High quality glass with less than 0.1mm surface accuracy.
  • 【Polymer Microporous Surface】The polymer surface with microporous has a good adhesion to 3D printing materials such as PLA ABS PC NYLON PP PETG. And also easy to remove when it’s cool down.
  • 【High Quality Material】Tempered glass with polymer coating. Mohs hardness: 7, operating temperature: 350°C
  • 【Easy To Cleaning】The surface is easy to cleaning up with acetone or alcohol.
  • 【Warm Note】Please feel free to contact us for refund or replacement if there any issues, Thanks for choosing our 3D printer parts, have a nice day.
Printinz plate 3d printer bed upgrade New
Leeofty Magnetic Build Surface Plate Sticker Pad Ultra-Flexible Removable 310x310mm Compatible with 310mm 3D Printer Hotbed Heated Bed
  • Upgrade Magnet Build Surface Plate, sized 310*310mm/ 12.2 *12.2in, suitable for 3D printer heated beds with the same size.
  • Build surface comes with upper magnetic build surface and lower magnetic adhesive base, easy to use.
  • Simply stick the adhesive bottom plate onto the heat bed platform without edge warp, and no glue is needed, convenient to use.
  • Easy removal PLA and PLA-based materials from 3D printing platform, ensuring the bottom of your finished model delicate and no warping, and no need any scrapper.
  • Premium material, super flatness, fast and uniform heating, work at max. 70℃, and can be repeated usage for saving cost.
Printinz plate 3d printer bed upgrade New
Gaetooely 310mm New Upgrade Removal Spring Steel Sheet Pre-Applied PEI Magnetic Base For Ender 3 CR-10 CR-10S 3D Printer Hot Bed
  • 3.Suitable for almost all filaments. PLA, ABS, PC, etc
  • 1.Flexible, Removable, stick to magnets very well, Never warp& Never rust.
  • 2.Magnetic base can stand the high temp at 130℃ without losing magnetism.
  • 4.Fast heater performance, less waiting time after printing.
Printinz plate 3d printer bed upgrade New
3D Printer Spring Steel Sheet-Spring Steel Sheet PEI with 3D Printer Magnetic Back Plate for Ender‑3/CR10 Series 310x310mm
  • The first layer is succinite color and glossy surface PEI film, good adhesion to various printing materials, especially PLA and ABS, high temperature resistance of 260℃
  • Spring steel plate second layer. Spring steel is a steel specially used to make springs and elastic components, come with the ability of elastic deformation, which is difficult to permanently deform by human power
  • Soft magnetic rubber base with soft texture, good magnetism and temperature resistance, with adhesive can be directly attached to the heatbed platform
  • Strong surface adhesion, cold printing can be achieved without glue needed, and the printed product has a glossy bottom surface
  • Combination of magnetic steel, which is easy to take mold by gently bending steel plate

Where to buy?

If you are asking yourself where to buy Printinz plate 3d printer bed upgrade? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Printinz plate 3d printer bed upgrade, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Printinz plate 3d printer bed upgrade and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Printinz plate 3d printer bed upgrade may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Printinz plate 3d printer bed upgrade used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Printinz plate 3d printer bed upgrade at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

Gaetooely 310mm New Upgrade Removal Spring Steel Sheet Pre-Applied PEI Magnetic Base For Ender 3 CR-10 CR-10S 3D Printer Hot Bed
  • 3.Suitable for almost all filaments. PLA, ABS, PC, etc
  • 1.Flexible, Removable, stick to magnets very well, Never warp& Never rust.
  • 2.Magnetic base can stand the high temp at 130℃ without losing magnetism.
  • 4.Fast heater performance, less waiting time after printing.
235x235mm Build Surface Magnetic for Ender 3 Ender 3 v2 Build Plate Pei Sheet Bed Surface Eewolf
  • Compatible with Creality ender 3, ender 3 pro, ender 3 v2 3d printers ect.
  • Suggested filament: PLA, abs petg not supported.
  • Frosted surface makes it easier to adhere the filament to the build surface when printing.
  • Part A can be removed and bent which helps to remove the model easily.
  • Please note auto sensor could not detect the build surface directly as it’s not metal.
Leeofty Magnetic Build Surface Plate Sticker Pad Ultra-Flexible Removable 310x310mm Compatible with 310mm 3D Printer Hotbed Heated Bed
  • Upgrade Magnet Build Surface Plate, sized 310*310mm/ 12.2 *12.2in, suitable for 3D printer heated beds with the same size.
  • Build surface comes with upper magnetic build surface and lower magnetic adhesive base, easy to use.
  • Simply stick the adhesive bottom plate onto the heat bed platform without edge warp, and no glue is needed, convenient to use.
  • Easy removal PLA and PLA-based materials from 3D printing platform, ensuring the bottom of your finished model delicate and no warping, and no need any scrapper.
  • Premium material, super flatness, fast and uniform heating, work at max. 70℃, and can be repeated usage for saving cost.
3D Printer Build Surface 310 x 310mm for CR-10 CR-10S Anet E10 Platform 3PCS Eewolf
  •  [EASY TO INSTALL] Applying it was super simple, just peel and stick,and no bubbles, print adheres well
  •  [3D PRINTER BUILD SURFACE]: Please note the auto sensor could not detect the build surface directly as it’s not metal.
  •  [FULLY COMPATIBLY] Compatible with CR10 CR10S ANET E12 Wanhao i3 anet a8 ect.
  •  [REUSE & CUTTABLE] The 3D-printing build surface is a 310 x 310mm square sheet, reuse for multiple prints, just wipe down with is opropyl alcohol between prints for best results. This sheets can be cut down to desired size by scoring with a utility knife.
  •  [FILAMENT COMPATIBLE] PLA, PETG ect. (ABS not recommended)
Ctzrzyt 3D Printer Heated Bed Platform, 300x300mm New Flex Magnetic Bed Build Plate 2 In 1 For CR-10
  • Please Kindly Note: the plate is magnetic, the temperature (recommended from 50 to 80 degrees centigrade) should not exceed 80 degrees. so It is work well for PLA, not suitable for ABS filament, or the platform will comes bent . if set heated beyond 80 degree, it will lose magnetism or turn bent.
  • 2018 Upgrade 3D Printer Heatbed Plate Sheet: can install on a hoted bed and glass platform, fit for 11.81 inch*11.81 inch Printer Bed.
  • Product features:
  • 2 in 1 Plate: the A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models, B plate with adhesive, stick on the build surface.
  • Size: 300x300mm/ 11.81x11.81 inch

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Printinz plate 3d printer bed upgrade.

Rating: 3.88 of 5 - 24 votes
1 Star2 Stars3 Stars4 Stars5 Stars (24 votes, average: 3.88 out of 5)
Loading...