Online product reviews and comparisons for Powerspec wanhao duplicator i3 plus 3d printer.
- 【Independent dual extruder】Double efficiency of the mirror printing. Creator Pro2 make it come true that more complicated prints can be printed perfectly
- 【Heating bed】 Rapid steady heating prevent model warping much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG,TPU etc
- 【Anti-scrape Design】Avoid scrap in the process of printing to get better printed results
- 【Out of box】Creator Pro is suitable for industrial design,tool design,architecture designer,mechanical designer etc
- 【What you get】Flashforge 3d printer Creator Pro2 12 months warranty, lifetime technical assistance and 24 hours professional customer service
- SIMAX3D dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy
- Compared to other extruder, SIMAX3D BMG extruder uses double wheel to feed filament from two sides to make sure filament is evenly stressed and avoid filament slip.
- Dual drive technology: It is easy to assemble and feed the filament smoothly and continuously without worrying about sanding or slipping under the most demanding conditions.
- SIMAX3D BMG extruder is able to adjust the tightness with screw nut to fit with all 3D printing£¬filament solid &soft: PLA / ABS / PETG / TPU / NYLON / CARBON FIBER / WOOD
- Suitable for most DIY 3D printers, such as Creality CR10, Ender 3 series, Wanhao D9, Anet E10, Geeetech A10 3D printer high-performance upgrade parts.
- Upgrade Replacement FlexPlate for Wanhao Monoprice 220 hotbed: Cut corner to fit well, flexible, removable.
- Size: 220*220mm/ 8.6*8.6 inch,Note: We have already helped you stick PEI on the steel plate,You don’t need to worry about how to stick PEI And Worried about have bubbles。
- Specially-coated FlexPlates are resistant to rust and work on both heated and non-heated print beds. The FlexPlate is engineered to maintain shape over time.
- Simply adhere a PEI to the top of the FlexPlate, attach to your print bed via the Magnetic Mounting Base, perform a one-time z-height adjustment, and begin printing. When printing is complete, simply remove the FlexPlate, flex, and pop your prints off!
- After Sales Guarantee:each one defective item can have the free replacement or refund, if you meet any issues, please feel free to email or Q&A us, we will try our best to assist you
- 【Innovative Leveling-free Tech】 Featuring an innovative leveling-free device which is designed with a smart pressure sensor to truly achieve hassle-free and intelligently automatic platform leveling, greatly improving bed adhesion and print quality. CR-6 SE is factory pre-leveled and replace the leveling nuts on the Ender 3/CR-10, making the printing much easier.
- 【Modularized Nozzle】 The CR-6 SE 3D printer includes a modularized nozzle for encouraging ease in nozzle maintenance and tinkering, which allows users to replace and substitute components with ease. The heat sink, heat block, teflon tube, and hotend are all deconstructable. A set of powerful cooling fans enables superior control over filament extrusion and retraction. The hotend also houses an filament runout sensor to pause prints when required.
- 【Upgraded Dependable Extruder】 With its compact and reliable extruder, you know that a smoother extrusion and an easier filament feed will ultimately generate faster, quieter and smoother prints. Yes, this is what perfect 3D printing is all about! the new extruder design makes loading the filament quick and painless.
- 【Silent Motherboard with Trinamic Driver】 A silent chipset is added to the CR-6 SE. Its latest trinamic driver 2208 helps to ensure that voltage control, fast movement, and printing in silence are a given. Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10.
- 【Easy Assemble】 In comparison to an Ender 3, CR-6 SE comes almost assembled. You only need to spend 5 minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
- GREAT VALUE: sharp quality tweezers and 10pcs of 0.40mm nozzle cleaning needles packed in one safe container!
- ANTI-STATIC, NON-MAGNETIC CURVED PRECISION TWEEZERS; 3D printing tweezers great for nozzle maintenance and cleaning excess support material
- 10 PCS OF 0.40MM DIAMETER FLEXIBLE STAINLESS STEEL NEEDLES; Ideal for gentle maintenance of your nozzles and hard to reach places like the feed gears
- HANDY, SAFE AND STYLISH CONTAINER; All of the items come in a neat plastic tube with a screw lid to keep them safely together
- LONG-LASTING KIT FOR SEVERAL PURPOSES; Remove excess plastic and clear jams with high precision, also great for general maintenance of the heatsink section
- Equipped with 0.4 mm and 0.6 mm brass nozzles, and spanner for remove the nozzle. Nozzles is made of brass material, which have excellent heat conduction advantage, can ensure accurate printing temperature.
- MK10 hot-end kit with a silicone sleeve, after installation, the hot-end temperature can be maintained stable to improve printing quality.
- Compatible with FlashForge Creator Pro, Creator X, Dreamer, Finder, Inventor, Dremel Idea Builder, Powerspec 3d Pro, Powerspec 3d X, Wanhao Duplicator 4S, Wanhao Duplicator 4x, Wanhao I3, Monoprice Maker select plus, qidi tech, cocoon create, etc.
- 3pcs PTFE Tubes, each tube is about about 8cm long, outside diameter 4mm, inside diameter 2mm.
- MK10 heating block has a M3 screw hole on both sides, which can install a threaded thermistor.
- Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle.
- Compatibility: Fit with MK10 hotend M7 thread aluminum heater block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech X-plus and X-max, Cocoon Create, etc.
- Quantity and specification: M7 thread 0.4mm nozzle 5 pieces. 0.4mm Nozzle cleaning drill bit 2 pieces. For detailed dimensions, please refer to the drawings in the upper left.
- Material: Nozzle is brass. Nozzle cleaning drill bit is stainless steel SUS304.
- Durability: Nozzle cleaning drill bit can be used heaps of times, because of SUS304 stainless steel material. It will neither rust nor be broken, no matter how it is used.You only need one to solve all the same size nozzles blockage problems.
- Newly upgraded PEI coated steel plate,gift:Magnetic Platform Side B.
- Size: 220mm x 220mm/8.6x8.6 inch,With Anet A8/Wanhao Duplicator i3/Monoprice Maker Compatible.
- It's spring steel sheet and PEI 2 in 1 item, made of high strength spring steel sheet with pei powder coat. No more PEI sheet replacement, no more 3M masking tape, no more abs juice, no more glue stick.
- Easy to install, easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc.
- After-sales service: If you encounter any defective products, we will provide you with a replacement or refund for free, if you encounter technical problems,Please contact us,We will do our best to help you!
- New V6 Sensor Heater Block - For HT-NTC100K PT100 sensor cartridge
- Material: Aluminum alloy
- For V6 nozzle (M6 Screw)
- With Allen wrench, Easy to install
- Made by WINSINN
Buy Powerspec wanhao duplicator i3 plus 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.
Don't miss out on the promotions for Powerspec wanhao duplicator i3 plus 3d printer, buy Powerspec wanhao duplicator i3 plus 3d printer directly online and enjoy big saving on your purchases.
On this page you will find the list of the best Powerspec wanhao duplicator i3 plus 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).
Overview
- Reviews: Powerspec wanhao duplicator i3 plus 3d printer
- Pricing: Powerspec wanhao duplicator i3 plus 3d printer
- Promotions and Deals: Powerspec wanhao duplicator i3 plus 3d printer
- Cost: Powerspec wanhao duplicator i3 plus 3d printer
- Catalog: Powerspec wanhao duplicator i3 plus 3d printer
- Where to buy: Powerspec wanhao duplicator i3 plus 3d printer
- Discount Coupon: Powerspec wanhao duplicator i3 plus 3d printer
- Similar Products: Powerspec wanhao duplicator i3 plus 3d printer
- 【Independent dual extruder】Double efficiency of the mirror printing. Creator Pro2 make it come true that more complicated prints can be printed perfectly
- 【Heating bed】 Rapid steady heating prevent model warping much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG,TPU etc
- 【Anti-scrape Design】Avoid scrap in the process of printing to get better printed results
- 【Out of box】Creator Pro is suitable for industrial design,tool design,architecture designer,mechanical designer etc
- 【What you get】Flashforge 3d printer Creator Pro2 12 months warranty, lifetime technical assistance and 24 hours professional customer service
- Bowden extrusion are supported:It comes with a nema stepper motor mount,works great on TEVO Tarantula i3,Anycubic Kossel i3 Mega,Flsun i3,MP Select and other bowden extrusion 3d printers as well.
- Direct extrusion are supported:This upgrade parts can also work as MK8 extruder frame with some modifications
- Recommend filament materials:PLA/ABS/Wood/TPU/PTEG,40 Teeth drive gear feeds the 1.75mm filament very smoothy.
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
- Equipped with 0.4 mm and 0.6 mm brass nozzles, and spanner for remove the nozzle. Nozzles is made of brass material, which have excellent heat conduction advantage, can ensure accurate printing temperature.
- MK10 hot-end kit with a silicone sleeve, after installation, the hot-end temperature can be maintained stable to improve printing quality.
- Compatible with FlashForge Creator Pro, Creator X, Dreamer, Finder, Inventor, Dremel Idea Builder, Powerspec 3d Pro, Powerspec 3d X, Wanhao Duplicator 4S, Wanhao Duplicator 4x, Wanhao I3, Monoprice Maker select plus, qidi tech, cocoon create, etc.
- 3pcs PTFE Tubes, each tube is about about 8cm long, outside diameter 4mm, inside diameter 2mm.
- MK10 heating block has a M3 screw hole on both sides, which can install a threaded thermistor.
- Newly upgraded PEI coated steel plate,gift:Magnetic Platform Side B.
- Size: 220mm x 220mm/8.6x8.6 inch,With Anet A8/Wanhao Duplicator i3/Monoprice Maker Compatible.
- It's spring steel sheet and PEI 2 in 1 item, made of high strength spring steel sheet with pei powder coat. No more PEI sheet replacement, no more 3M masking tape, no more abs juice, no more glue stick.
- Easy to install, easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc.
- After-sales service: If you encounter any defective products, we will provide you with a replacement or refund for free, if you encounter technical problems,Please contact us,We will do our best to help you!
- SIMAX3D dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy
- Compared to other extruder, SIMAX3D BMG extruder uses double wheel to feed filament from two sides to make sure filament is evenly stressed and avoid filament slip.
- Dual drive technology: It is easy to assemble and feed the filament smoothly and continuously without worrying about sanding or slipping under the most demanding conditions.
- SIMAX3D BMG extruder is able to adjust the tightness with screw nut to fit with all 3D printing£¬filament solid &soft: PLA / ABS / PETG / TPU / NYLON / CARBON FIBER / WOOD
- Suitable for most DIY 3D printers, such as Creality CR10, Ender 3 series, Wanhao D9, Anet E10, Geeetech A10 3D printer high-performance upgrade parts.
Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.
We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).
We have categorized the products in order to show the most popular and best sellers.
Powerspec wanhao duplicator i3 plus 3d printer
Here is the ranking of the best Powerspec wanhao duplicator i3 plus 3d printer, click to see reviews, details and active promotions:
Visit our section devoted to providing consumer opinions on Powerspec wanhao duplicator i3 plus 3d printer and read the reviews left by real customers, see the Powerspec wanhao duplicator i3 plus 3d printer ranking and find the store where to buy at the lowest price.
Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.
- Brass material advantage: The heat conductivity of brass is 7 times as high as that of steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of steel is so poor, it is unscientific and irrational used on MK10 nozzle;
- Improved Version: an M3 threaded hole has been added to the aluminum block, making it suitable for both M3 and M4 thermistor;
- Compatibility: Fit with MK10 hotend aluminum cooling block, such as DIY MK10 3D printer, FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc.
- Quantity and specification: 1 piece MK10 hotend kit, it include these parts: 0.4mm nozzle with M7 thread 1 piece, throat with 1.75mm PTFE tube 1 piece, aluminum heater block 1 piece.
- Material: Nozzle is brass. Throat is steel. Heater block is aluminium alloy.
- Compatibility: the printer nozzles fit for FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc.
- Package include: totally 8 pcs MK10 M7 Extruder Nozzle, 7 sizes: 1 x 0.2mm, 1 x 0.3mm, 2 x 0.4mm, 1 x 0.5mm, 1 x 0.6mm, 1 x 0.8mm, 1 x 1.0mm.
- Size: the 3D printer nozzles, Out Thread: M7, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
- Material: the 3D printer nozzles are made of premium brass, sturdy and high temperature resistance, smooth silk, connect with M7 out thread, easy to use.
- Alinan 3D printer nozzles use high quality raw materials and fine workmanship, if you have any question for our product, please feel free to contact us, we will do our best for you.
- MK10 nozzle and maintenance kit is equipped with 0.2/0.4/0.6/0.8/1.0mm brass nozzle, 5pcs for each size.
- 21mm opening stamping wrench required for nozzle replacement; 0.2/0.3/0.4/0.6/0.8mm five diameter nozzles for easy maintenance.
- Comes with a transparent plastic box to store these accessories, convenient to use.
- The needles are made of stainless steel material, and the handle copper wire is wound by the automatic handle winding machine. Fine workmanship, the handle and the needle body are not easy to separate and fall off.
- Compatible with FlashForge Creator Pro, Creator X, Dreamer, Finder, Inventor, Dremel Idea Builder, Powerspec 3d Pro, Powerspec 3d X, Wanhao Duplicator 4S, Wanhao Duplicator 4x, Wanhao I3, Monoprice MakER select plus, qidi tech, cocoon create and so on.
- 1.100% brand new
- 3.Significantly better heat transfer, easier disassemble and adjustments, precise control on bore diameter
- 4.On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size
- 2.Made of steel and aluminum
- 5.Suitable for Wanhao i3, Wanhao i3 Plus, Maker Select 3D Printer V2, Maker Select Plus, Create 3D Printer
- If you are not satisfied with our products and have any questions about the products, please feel free to contact us
- Needles,MK10 Brass Nozzle-
- 100% brand new and high quality. Useful 3D printer accessory for 3D printing,Needles
- Opening 21mm Wrench
- 0.2-0.23 layer hight, 40% infill density, 3x perrmeters
- All the parts is printed by quality PETG filament.
- Print settings:
- Applicable models: Prusa i3 MK3S 2.5S MMU2S
- 【Innovative Leveling-free Tech】 Featuring an innovative leveling-free device which is designed with a smart pressure sensor to truly achieve hassle-free and intelligently automatic platform leveling, greatly improving bed adhesion and print quality. CR-6 SE is factory pre-leveled and replace the leveling nuts on the Ender 3/CR-10, making the printing much easier.
- 【Modularized Nozzle】 The CR-6 SE 3D printer includes a modularized nozzle for encouraging ease in nozzle maintenance and tinkering, which allows users to replace and substitute components with ease. The heat sink, heat block, teflon tube, and hotend are all deconstructable. A set of powerful cooling fans enables superior control over filament extrusion and retraction. The hotend also houses an filament runout sensor to pause prints when required.
- 【Upgraded Dependable Extruder】 With its compact and reliable extruder, you know that a smoother extrusion and an easier filament feed will ultimately generate faster, quieter and smoother prints. Yes, this is what perfect 3D printing is all about! the new extruder design makes loading the filament quick and painless.
- 【Silent Motherboard with Trinamic Driver】 A silent chipset is added to the CR-6 SE. Its latest trinamic driver 2208 helps to ensure that voltage control, fast movement, and printing in silence are a given. Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10.
- 【Easy Assemble】 In comparison to an Ender 3, CR-6 SE comes almost assembled. You only need to spend 5 minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
- 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
- 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
- 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
- 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
- 【Warranty and Assemble】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
- 【Independent dual extruder】Double efficiency of the mirror printing. Creator Pro2 make it come true that more complicated prints can be printed perfectly
- 【Heating bed】 Rapid steady heating prevent model warping much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG,TPU etc
- 【Anti-scrape Design】Avoid scrap in the process of printing to get better printed results
- 【Out of box】Creator Pro is suitable for industrial design,tool design,architecture designer,mechanical designer etc
- 【What you get】Flashforge 3d printer Creator Pro2 12 months warranty, lifetime technical assistance and 24 hours professional customer service
Reviews
On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Powerspec wanhao duplicator i3 plus 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Powerspec wanhao duplicator i3 plus 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.
- If you are not satisfied with our products and have any questions about the products, please feel free to contact us
- Needles,MK10 Brass Nozzle-
- 100% brand new and high quality. Useful 3D printer accessory for 3D printing,Needles
- Opening 21mm Wrench
- Compatibility: the printer nozzles fit for FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc.
- Package include: totally 8 pcs MK10 M7 Extruder Nozzle, 7 sizes: 1 x 0.2mm, 1 x 0.3mm, 2 x 0.4mm, 1 x 0.5mm, 1 x 0.6mm, 1 x 0.8mm, 1 x 1.0mm.
- Size: the 3D printer nozzles, Out Thread: M7, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
- Material: the 3D printer nozzles are made of premium brass, sturdy and high temperature resistance, smooth silk, connect with M7 out thread, easy to use.
- Alinan 3D printer nozzles use high quality raw materials and fine workmanship, if you have any question for our product, please feel free to contact us, we will do our best for you.
- MK10 nozzle and maintenance kit is equipped with 0.2/0.4/0.6/0.8/1.0mm brass nozzle, 5pcs for each size.
- 21mm opening stamping wrench required for nozzle replacement; 0.2/0.3/0.4/0.6/0.8mm five diameter nozzles for easy maintenance.
- Comes with a transparent plastic box to store these accessories, convenient to use.
- The needles are made of stainless steel material, and the handle copper wire is wound by the automatic handle winding machine. Fine workmanship, the handle and the needle body are not easy to separate and fall off.
- Compatible with FlashForge Creator Pro, Creator X, Dreamer, Finder, Inventor, Dremel Idea Builder, Powerspec 3d Pro, Powerspec 3d X, Wanhao Duplicator 4S, Wanhao Duplicator 4x, Wanhao I3, Monoprice MakER select plus, qidi tech, cocoon create and so on.
- Brass material advantage: The heat conductivity of brass is 7 times as high as that of steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of steel is so poor, it is unscientific and irrational used on MK10 nozzle;
- Improved Version: an M3 threaded hole has been added to the aluminum block, making it suitable for both M3 and M4 thermistor;
- Compatibility: Fit with MK10 hotend aluminum cooling block, such as DIY MK10 3D printer, FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc.
- Quantity and specification: 1 piece MK10 hotend kit, it include these parts: 0.4mm nozzle with M7 thread 1 piece, throat with 1.75mm PTFE tube 1 piece, aluminum heater block 1 piece.
- Material: Nozzle is brass. Throat is steel. Heater block is aluminium alloy.
- 0.2-0.23 layer hight, 40% infill density, 3x perrmeters
- All the parts is printed by quality PETG filament.
- Print settings:
- Applicable models: Prusa i3 MK3S 2.5S MMU2S
Pricing
The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.
How can you get the best deal? Read and learn in order to select the most convenient offer.
The price is updated every day so you always know how much Powerspec wanhao duplicator i3 plus 3d printer actually costs.
- 【Independent dual extruder】Double efficiency of the mirror printing. Creator Pro2 make it come true that more complicated prints can be printed perfectly
- 【Heating bed】 Rapid steady heating prevent model warping much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG,TPU etc
- 【Anti-scrape Design】Avoid scrap in the process of printing to get better printed results
- 【Out of box】Creator Pro is suitable for industrial design,tool design,architecture designer,mechanical designer etc
- 【What you get】Flashforge 3d printer Creator Pro2 12 months warranty, lifetime technical assistance and 24 hours professional customer service
- SIMAX3D dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy
- Compared to other extruder, SIMAX3D BMG extruder uses double wheel to feed filament from two sides to make sure filament is evenly stressed and avoid filament slip.
- Dual drive technology: It is easy to assemble and feed the filament smoothly and continuously without worrying about sanding or slipping under the most demanding conditions.
- SIMAX3D BMG extruder is able to adjust the tightness with screw nut to fit with all 3D printing£¬filament solid &soft: PLA / ABS / PETG / TPU / NYLON / CARBON FIBER / WOOD
- Suitable for most DIY 3D printers, such as Creality CR10, Ender 3 series, Wanhao D9, Anet E10, Geeetech A10 3D printer high-performance upgrade parts.
- Upgrade Replacement FlexPlate for Wanhao Monoprice 220 hotbed: Cut corner to fit well, flexible, removable.
- Size: 220*220mm/ 8.6*8.6 inch,Note: We have already helped you stick PEI on the steel plate,You don’t need to worry about how to stick PEI And Worried about have bubbles。
- Specially-coated FlexPlates are resistant to rust and work on both heated and non-heated print beds. The FlexPlate is engineered to maintain shape over time.
- Simply adhere a PEI to the top of the FlexPlate, attach to your print bed via the Magnetic Mounting Base, perform a one-time z-height adjustment, and begin printing. When printing is complete, simply remove the FlexPlate, flex, and pop your prints off!
- After Sales Guarantee:each one defective item can have the free replacement or refund, if you meet any issues, please feel free to email or Q&A us, we will try our best to assist you
- 【Innovative Leveling-free Tech】 Featuring an innovative leveling-free device which is designed with a smart pressure sensor to truly achieve hassle-free and intelligently automatic platform leveling, greatly improving bed adhesion and print quality. CR-6 SE is factory pre-leveled and replace the leveling nuts on the Ender 3/CR-10, making the printing much easier.
- 【Modularized Nozzle】 The CR-6 SE 3D printer includes a modularized nozzle for encouraging ease in nozzle maintenance and tinkering, which allows users to replace and substitute components with ease. The heat sink, heat block, teflon tube, and hotend are all deconstructable. A set of powerful cooling fans enables superior control over filament extrusion and retraction. The hotend also houses an filament runout sensor to pause prints when required.
- 【Upgraded Dependable Extruder】 With its compact and reliable extruder, you know that a smoother extrusion and an easier filament feed will ultimately generate faster, quieter and smoother prints. Yes, this is what perfect 3D printing is all about! the new extruder design makes loading the filament quick and painless.
- 【Silent Motherboard with Trinamic Driver】 A silent chipset is added to the CR-6 SE. Its latest trinamic driver 2208 helps to ensure that voltage control, fast movement, and printing in silence are a given. Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10.
- 【Easy Assemble】 In comparison to an Ender 3, CR-6 SE comes almost assembled. You only need to spend 5 minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
- GREAT VALUE: sharp quality tweezers and 10pcs of 0.40mm nozzle cleaning needles packed in one safe container!
- ANTI-STATIC, NON-MAGNETIC CURVED PRECISION TWEEZERS; 3D printing tweezers great for nozzle maintenance and cleaning excess support material
- 10 PCS OF 0.40MM DIAMETER FLEXIBLE STAINLESS STEEL NEEDLES; Ideal for gentle maintenance of your nozzles and hard to reach places like the feed gears
- HANDY, SAFE AND STYLISH CONTAINER; All of the items come in a neat plastic tube with a screw lid to keep them safely together
- LONG-LASTING KIT FOR SEVERAL PURPOSES; Remove excess plastic and clear jams with high precision, also great for general maintenance of the heatsink section
- Equipped with 0.4 mm and 0.6 mm brass nozzles, and spanner for remove the nozzle. Nozzles is made of brass material, which have excellent heat conduction advantage, can ensure accurate printing temperature.
- MK10 hot-end kit with a silicone sleeve, after installation, the hot-end temperature can be maintained stable to improve printing quality.
- Compatible with FlashForge Creator Pro, Creator X, Dreamer, Finder, Inventor, Dremel Idea Builder, Powerspec 3d Pro, Powerspec 3d X, Wanhao Duplicator 4S, Wanhao Duplicator 4x, Wanhao I3, Monoprice Maker select plus, qidi tech, cocoon create, etc.
- 3pcs PTFE Tubes, each tube is about about 8cm long, outside diameter 4mm, inside diameter 2mm.
- MK10 heating block has a M3 screw hole on both sides, which can install a threaded thermistor.
- Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle.
- Compatibility: Fit with MK10 hotend M7 thread aluminum heater block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech X-plus and X-max, Cocoon Create, etc.
- Quantity and specification: M7 thread 0.4mm nozzle 5 pieces. 0.4mm Nozzle cleaning drill bit 2 pieces. For detailed dimensions, please refer to the drawings in the upper left.
- Material: Nozzle is brass. Nozzle cleaning drill bit is stainless steel SUS304.
- Durability: Nozzle cleaning drill bit can be used heaps of times, because of SUS304 stainless steel material. It will neither rust nor be broken, no matter how it is used.You only need one to solve all the same size nozzles blockage problems.
- Newly upgraded PEI coated steel plate,gift:Magnetic Platform Side B.
- Size: 220mm x 220mm/8.6x8.6 inch,With Anet A8/Wanhao Duplicator i3/Monoprice Maker Compatible.
- It's spring steel sheet and PEI 2 in 1 item, made of high strength spring steel sheet with pei powder coat. No more PEI sheet replacement, no more 3M masking tape, no more abs juice, no more glue stick.
- Easy to install, easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc.
- After-sales service: If you encounter any defective products, we will provide you with a replacement or refund for free, if you encounter technical problems,Please contact us,We will do our best to help you!
- New V6 Sensor Heater Block - For HT-NTC100K PT100 sensor cartridge
- Material: Aluminum alloy
- For V6 nozzle (M6 Screw)
- With Allen wrench, Easy to install
- Made by WINSINN
Promotions and Deals (UK)
During the year there are many promotions on products for sale online and Powerspec wanhao duplicator i3 plus 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".
We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).
Cost
Below we have selected a list of Powerspec wanhao duplicator i3 plus 3d printer which are among the cheapest on the market. Just scroll through the list to find Powerspec wanhao duplicator i3 plus 3d printer the cheapest products.
Catalog
The product Powerspec wanhao duplicator i3 plus 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.
Powerspec wanhao duplicator i3 plus 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.
The online catalog is updated frequently in order to provide the latest details, product inforomation and price.
- Brass material advantage: The heat conductivity of brass is 7 times as high as that of steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of steel is so poor, it is unscientific and irrational used on MK10 nozzle;
- Improved Version: an M3 threaded hole has been added to the aluminum block, making it suitable for both M3 and M4 thermistor;
- Compatibility: Fit with MK10 hotend aluminum cooling block, such as DIY MK10 3D printer, FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc.
- Quantity and specification: 1 piece MK10 hotend kit, it include these parts: 0.4mm nozzle with M7 thread 1 piece, throat with 1.75mm PTFE tube 1 piece, aluminum heater block 1 piece.
- Material: Nozzle is brass. Throat is steel. Heater block is aluminium alloy.
- Compatibility: the printer nozzles fit for FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc.
- Package include: totally 8 pcs MK10 M7 Extruder Nozzle, 7 sizes: 1 x 0.2mm, 1 x 0.3mm, 2 x 0.4mm, 1 x 0.5mm, 1 x 0.6mm, 1 x 0.8mm, 1 x 1.0mm.
- Size: the 3D printer nozzles, Out Thread: M7, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
- Material: the 3D printer nozzles are made of premium brass, sturdy and high temperature resistance, smooth silk, connect with M7 out thread, easy to use.
- Alinan 3D printer nozzles use high quality raw materials and fine workmanship, if you have any question for our product, please feel free to contact us, we will do our best for you.
- MK10 nozzle and maintenance kit is equipped with 0.2/0.4/0.6/0.8/1.0mm brass nozzle, 5pcs for each size.
- 21mm opening stamping wrench required for nozzle replacement; 0.2/0.3/0.4/0.6/0.8mm five diameter nozzles for easy maintenance.
- Comes with a transparent plastic box to store these accessories, convenient to use.
- The needles are made of stainless steel material, and the handle copper wire is wound by the automatic handle winding machine. Fine workmanship, the handle and the needle body are not easy to separate and fall off.
- Compatible with FlashForge Creator Pro, Creator X, Dreamer, Finder, Inventor, Dremel Idea Builder, Powerspec 3d Pro, Powerspec 3d X, Wanhao Duplicator 4S, Wanhao Duplicator 4x, Wanhao I3, Monoprice MakER select plus, qidi tech, cocoon create and so on.
- 1.100% brand new
- 3.Significantly better heat transfer, easier disassemble and adjustments, precise control on bore diameter
- 4.On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size
- 2.Made of steel and aluminum
- 5.Suitable for Wanhao i3, Wanhao i3 Plus, Maker Select 3D Printer V2, Maker Select Plus, Create 3D Printer
- If you are not satisfied with our products and have any questions about the products, please feel free to contact us
- Needles,MK10 Brass Nozzle-
- 100% brand new and high quality. Useful 3D printer accessory for 3D printing,Needles
- Opening 21mm Wrench
- 0.2-0.23 layer hight, 40% infill density, 3x perrmeters
- All the parts is printed by quality PETG filament.
- Print settings:
- Applicable models: Prusa i3 MK3S 2.5S MMU2S
- 【Innovative Leveling-free Tech】 Featuring an innovative leveling-free device which is designed with a smart pressure sensor to truly achieve hassle-free and intelligently automatic platform leveling, greatly improving bed adhesion and print quality. CR-6 SE is factory pre-leveled and replace the leveling nuts on the Ender 3/CR-10, making the printing much easier.
- 【Modularized Nozzle】 The CR-6 SE 3D printer includes a modularized nozzle for encouraging ease in nozzle maintenance and tinkering, which allows users to replace and substitute components with ease. The heat sink, heat block, teflon tube, and hotend are all deconstructable. A set of powerful cooling fans enables superior control over filament extrusion and retraction. The hotend also houses an filament runout sensor to pause prints when required.
- 【Upgraded Dependable Extruder】 With its compact and reliable extruder, you know that a smoother extrusion and an easier filament feed will ultimately generate faster, quieter and smoother prints. Yes, this is what perfect 3D printing is all about! the new extruder design makes loading the filament quick and painless.
- 【Silent Motherboard with Trinamic Driver】 A silent chipset is added to the CR-6 SE. Its latest trinamic driver 2208 helps to ensure that voltage control, fast movement, and printing in silence are a given. Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10.
- 【Easy Assemble】 In comparison to an Ender 3, CR-6 SE comes almost assembled. You only need to spend 5 minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
- 【Independent Dual Extruder Design】Our Hands 2 Dual Extruder 3D Printer has double nozzles that are independent of each other, allowing you to print in duplication and mirror mode. You can also choose two different colors or materials to create at the same time or print with soluble support (such as PVA) to precisely implement models that are difficult to lay down.
- 【Upgrade Borosilicate Glass Bed】TENLOG upgrade borosilicate glass bed enable prints adhere better without the warping.ultra smoothness even on the first layer,the model can be Pick up by hand after cooling.
- 【Self-developed Silent Motherboard 】The Hands 2 built-in self-developed silent motherboard tmc2208 driver, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
- 【Easy to Assemble】The printer comes with several pre-assembled parts. You can assemble the 3D printer in 3 steps, with the user manual, in about 5 minutes.
- 【Warranty and Assemble】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!
- 【Independent dual extruder】Double efficiency of the mirror printing. Creator Pro2 make it come true that more complicated prints can be printed perfectly
- 【Heating bed】 Rapid steady heating prevent model warping much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG,TPU etc
- 【Anti-scrape Design】Avoid scrap in the process of printing to get better printed results
- 【Out of box】Creator Pro is suitable for industrial design,tool design,architecture designer,mechanical designer etc
- 【What you get】Flashforge 3d printer Creator Pro2 12 months warranty, lifetime technical assistance and 24 hours professional customer service
Where to buy?
If you are asking yourself where to buy Powerspec wanhao duplicator i3 plus 3d printer? Buy online or directly in a shop?
- Online The advantages of online stores are the immediate availability of Powerspec wanhao duplicator i3 plus 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
- Physical Store In a physical store instead you can try the product with your own hands, you can directly see Powerspec wanhao duplicator i3 plus 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.
Powerspec wanhao duplicator i3 plus 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Powerspec wanhao duplicator i3 plus 3d printer used.
Discounts and Coupons in the United Kingdom (UK)
If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Powerspec wanhao duplicator i3 plus 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.
- If you are not satisfied with our products and have any questions about the products, please feel free to contact us
- Needles,MK10 Brass Nozzle-
- 100% brand new and high quality. Useful 3D printer accessory for 3D printing,Needles
- Opening 21mm Wrench
- Compatibility: the printer nozzles fit for FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc.
- Package include: totally 8 pcs MK10 M7 Extruder Nozzle, 7 sizes: 1 x 0.2mm, 1 x 0.3mm, 2 x 0.4mm, 1 x 0.5mm, 1 x 0.6mm, 1 x 0.8mm, 1 x 1.0mm.
- Size: the 3D printer nozzles, Out Thread: M7, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
- Material: the 3D printer nozzles are made of premium brass, sturdy and high temperature resistance, smooth silk, connect with M7 out thread, easy to use.
- Alinan 3D printer nozzles use high quality raw materials and fine workmanship, if you have any question for our product, please feel free to contact us, we will do our best for you.
- MK10 nozzle and maintenance kit is equipped with 0.2/0.4/0.6/0.8/1.0mm brass nozzle, 5pcs for each size.
- 21mm opening stamping wrench required for nozzle replacement; 0.2/0.3/0.4/0.6/0.8mm five diameter nozzles for easy maintenance.
- Comes with a transparent plastic box to store these accessories, convenient to use.
- The needles are made of stainless steel material, and the handle copper wire is wound by the automatic handle winding machine. Fine workmanship, the handle and the needle body are not easy to separate and fall off.
- Compatible with FlashForge Creator Pro, Creator X, Dreamer, Finder, Inventor, Dremel Idea Builder, Powerspec 3d Pro, Powerspec 3d X, Wanhao Duplicator 4S, Wanhao Duplicator 4x, Wanhao I3, Monoprice MakER select plus, qidi tech, cocoon create and so on.
- Brass material advantage: The heat conductivity of brass is 7 times as high as that of steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of steel is so poor, it is unscientific and irrational used on MK10 nozzle;
- Improved Version: an M3 threaded hole has been added to the aluminum block, making it suitable for both M3 and M4 thermistor;
- Compatibility: Fit with MK10 hotend aluminum cooling block, such as DIY MK10 3D printer, FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc.
- Quantity and specification: 1 piece MK10 hotend kit, it include these parts: 0.4mm nozzle with M7 thread 1 piece, throat with 1.75mm PTFE tube 1 piece, aluminum heater block 1 piece.
- Material: Nozzle is brass. Throat is steel. Heater block is aluminium alloy.
- 0.2-0.23 layer hight, 40% infill density, 3x perrmeters
- All the parts is printed by quality PETG filament.
- Print settings:
- Applicable models: Prusa i3 MK3S 2.5S MMU2S
Similar Products
Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Powerspec wanhao duplicator i3 plus 3d printer.