Plus 2 3d printer Reviews and Best Deals

Online product reviews and comparisons for Plus 2 3d printer.

Latest Plus 2 3d printer
ELEGOO Mercury Plus 2 in 1 Wash and Curing Machine for LCD/DLP/SLA 3D Printed Models Resin UV Curing Box with Rotary Curing Turntable and Washing Bucket
  • 【Dual Function】Wash and Cure 2 in 1 design makes washing and curing for 3D printed models realized in one machine. The operating process is now more efficient with less effort to meet your different needs.
  • 【Fexible Washing Mode】The models can be placed in the cleaning basket to clearn separately, or mount the build plate with models on it and wash them together, which can avoid direct contact to uncured resin. The height of the platform bracket can be adjusted to fit the liquid level in the bucket.
  • 【Intelligent Curing Control】Built-in 8pcs 385nm plus 8pcs 405nm UV curing lamp beads, work together with the 360-degree rotating curing turntable, which can cure the models evenly. 0.96 inch TFT LCD screen can visually display the set time and the remaining time. With automatic protection, picking up the cover in the operating state will suspend operation and emit a beeping sound. The cover can block 99.95% of ultraviolet rays to protect your vision.
  • 【Ideal Compatity 】Compatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, Mars Pro, Mars C, Photon, Photon S on the market, which provides you an ideal support for your 3D resin prints.
  • 【Special Notes 】The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.
DISCOUNTLatest Plus 2 3d printer
Creality Upgraded Ender 5 Plus V2.2.1 Silent Mainboard with TMC2208 Driver, Super Quiet Mute Motherboard for CR-10S/ CR-10 S4/ CR-10 S5/ CR-X/CR-20/ CR-20 PRO 3D Printer
  • Upgraded silent mainboard for creality ender 5 plus printer, just plug it in and you could start printing. If use for CR-10S/ CR-10 S4/ CR-10 S5/ CR-X/CR-20/ CR-20 PRO , please update the firmware first.
  • Super Quiet and Noise Reduction. Use TMC2208 Stepper Motor Drivers, which the key component to eliminate the printer's motor when printing.
  • Notice: This new upgraded silent mainboard does not currently come pre-installed on ender 5 plus.
  • Bootloader pre-installed. The firmware can be modified by Cura with the USB cable.
  • Concern for safety. Thermal runaway protection is enabled, if the temperature rises out of control, the printer will stop heating and halt automatically.
Latest Plus 2 3d printer
Aibecy Anet 3D Printer Parts End Stop Endstop Limit Switches Plug Control with 24AWG Cable 2 Pins Switch for Anet A8 Plus Desktop 3D Printer
  • The endstop Limit Switches kit fits for Anet A8 Plus 3D printer.
  • The package includes 3pcs limit switches(2pin), one of one with pulley and the other two without pulley; 3pcs cables, 750mm(1pcs) and 500mm(2pcs).
  • Triggering is sensitive, repeat positioning is in high accuracy, with a longer service life.
  • Small size, easy installation, just plug and play.
  • 100% brand new and high quality, perfect 3D printer parts.
Latest Plus 2 3d printer
Anet A8 Plus Upgraded High-precision DIY 3D Printer Self-assembly 300 * 300 * 350mm Large Print Size Aluminum Alloy Frame Moveable LCD Control Panel Over-current Protection Mainboard
  • 【Upgraded Printing Size & Operation Method】 printing size is enlarged to 300*300*350mm, and large enough to satisfy your creativity; the magnetic movable LCD control panel and convenient knob type control design make your operation more efficient and more flexible.
  • 【Upgraded aluminum alloy frame & Easier assembly】 Consist of more durable aluminum alloy frame; the Y axis is designed with double polished rods, and the Z axis with double threaded rods, which to achieve a breakthrough and upgrade of the structure and movement stability; the tightness of Z axis and Y axis belts can be freely adjusted and are more convenient to use.
  • 【Upgraded Heatbed & Mainboard】 Aluminum substrate heatbed comes with a glass panel, so that the printing is smooth without sharp edge and the model is easy to remove; the mainboard is added designs of over-current protection and short-circuit protection, with smaller current configuration, safer and more reliable.
  • 【Upgraded Filament Loading & Extruder Structure】 added automatically loading and unloading filament function, which is very easy to add or exchange filament.Using the patented extruder structure, the filament extruding is more smooth without clogging. Direct filament loading improves printing effect of TPU filament.
  • 【Wide Compatibility and Application】Compatible with various 1.75mm printing filaments like PLA, ABS, HIPS, TPU, wood, etc; widely used in architecture, medical, home decoration, industry, movie and other many fields.
Latest Plus 2 3d printer
Creality V2.2.1 Silent Mainboard with TMC2208 Drivers BootLoader Controller Motherboard for Ender 5 Plus CR-10S/ CR-10 S4/ CR-10 S5/ CR-X/CR-20/ CR-20 PRO CR-X 3D Printer
  • Upgraded mainboard v2.2 which is is quieter, more powerful and has excellent stability during printing , Compatible with Creality Ender 5 plus, CR-10S, CR-10 S4, CR-10 S5, CR-X, CR-20, CR-20 PRO 3D printer.
  • TMC2208 driver and the bootloader is pre-installed, Update the firmware with Arduino/Cura by using USB.
  • Firmware is pre-installed on this board, plug and play for Ender 5 plus, Support BLtouch
  • Thermal runaway protection is enabled. The mainboard optimizes the circuit and can effectively solve the heating problem and provide overheat protection.
  • Easy to operate. USB interface is suitable for use with E / X / Y / Z-axis motors.
DISCOUNTLatest Plus 2 3d printer
Aibecy XY-2 Pro 3D Printer Kit Fast Assembly 255 * 255 * 260mm Build Volume Support Auto Leveling Resume Print Filament Run Out Detection with 8G TF Card & PLA Filament 250g for TRONXY XY-2 Pro
  • 【Modular design, 3 Steps Assemble, Easy to assemble in 15 minutes】3 Steps: Connect Upper Bracket, Base (Already assembled), Touchscreen, easy to assemble in ten minutes. Back-shaped structure, stable and firm.Aluminum profile frame, which has strong structure and high stability. Assembly instruction video : https://www.youtube.com/watch?v=M9_8yu2meWY
  • 【Auto resume printing function and filament run out detection】Printer has resume printing function, when the power is restored, the printer will continue to print from the interruption point.Support filament run out detection, timely remind filament shortage or cut-off filament.
  • 【 Hot bed Auto leveling】High quality auto leveling sensor, ensure hot bed leveling, improve printing accuracy. Durable black sticker, easier to remove the model and don't be afraid to scratch the surface.
  • 【3.5 inches full color touchscreen,Print silent, still quiet working environment】With 3.5 inches full color touchscreen , easy to understand and operate. Double fans extruder head, better cooling effect, more stable printing, longer service life.
  • 【Larger print size】Max.255*255*260mm printing size( Popular Ender 3 pro in the market is 220*220*250mm), support various 1.75mm printing filaments like PLA, HIPS, WOOD, PC, PVC and more. Widely used in toy, architecture, furniture, education, medical, daily necessities and other fields.
Latest Plus 2 3d printer
ANYCUBIC 3D Printer, Photon S UV LCD Printer Photocuring Ultra Precision, Masking Technology 2K Screen Matrix 405nm UV Light Z-axis Dual Linear Rail Printing with Air Filtering System
  • 【2.8 Inch Color Touch Screen】Anycubic Photon S 3d Printer is equipped with 2.8 inch color touch screen. It support USB connectivity. The priting sizes: 115mm(L)*65mm(W)*165mm(H).It is updated and can support up to 8x anti-aliasing compared with the old version.
  • 【High Precision Printing】Anycubic Photon S features upgraded matrix uv lighting and Z-axis dual linear rail, which uniform distribution of energy and improves the stability of Z axis, so that it can allows high precise printing with more details.
  • 【Anycubic Slicer Software & Easy Levling】Anycubic Photon S supports self-developed slicer software. It's easy to use and fast to slice. Easy leveling with a few steps: lower the platform down to the screen, pull the paper to get the right adjustment and tighten the screw to get leveling done.
  • 【Silent Print & Air Purification System】It's silent during the printing process. You can sleep soundly even when the working 3d printer is placed by your side. The 3d printer is designed with dual fans for ventilation and use activated carbon to reduce the smell.
  • 【Customer Service Warranty】1 bottle of 500g resin (random color) is included. We promise to provide you with product repair warranty. If you have any problems with the product, you can contact Anycubic customer service. We have customer service in every workday.
Latest Plus 2 3d printer
SIQUK 22 Pieces 3D Printer Nozzles MK8 Nozzle 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Extruder Print Head with Free Storage Box for 3D Printer Makerbot Creality CR-10
  • Package include: totally 22 pcs MK8 nozzles in 7 sizes, 2 x 0.2mm, 2 x 0.3mm, 10 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm
  • Parameter: input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; out thread: M6
  • Applicability and compatibility: fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer
  • Premium material: the 3D printer nozzles are made of high quality brass material, sturdy and durable, connect with M6 out thread, easy to install
  • Attention: small accessories, please keep away from children
Latest Plus 2 3d printer
YOTINO 3D Printer Thermistor NTC 3950 100k Thermistor for Maker Select Plus and Wanhao Duplicator i3 Plus 3D Printers
  • Drop-in replacement for stock thermistor on MP Maker Select Plus / Wanhao Duplicator Plus
  • Also compatible with MP Maker Select V2.1 and Wanhao Duplicator V2.1
  • Easy to mount with M3 HEX stub
  • Can hold temperature up to 300C with ceramic glue and fiberglass insulation on leads
  • HX2.54 connector at end

Buy Plus 2 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Plus 2 3d printer, buy Plus 2 3d printer directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Plus 2 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


DISCOUNTBest
Creality Upgraded Ender 5 Plus V2.2.1 Silent Mainboard with TMC2208 Driver, Super Quiet Mute Motherboard for CR-10S/ CR-10 S4/ CR-10 S5/ CR-X/CR-20/ CR-20 PRO 3D Printer
  • Upgraded silent mainboard for creality ender 5 plus printer, just plug it in and you could start printing. If use for CR-10S/ CR-10 S4/ CR-10 S5/ CR-X/CR-20/ CR-20 PRO , please update the firmware first.
  • Super Quiet and Noise Reduction. Use TMC2208 Stepper Motor Drivers, which the key component to eliminate the printer's motor when printing.
  • Notice: This new upgraded silent mainboard does not currently come pre-installed on ender 5 plus.
  • Bootloader pre-installed. The firmware can be modified by Cura with the USB cable.
  • Concern for safety. Thermal runaway protection is enabled, if the temperature rises out of control, the printer will stop heating and halt automatically.
Best
ELEGOO Mercury Plus 2 in 1 Wash and Curing Machine for LCD/DLP/SLA 3D Printed Models Resin UV Curing Box with Rotary Curing Turntable and Washing Bucket
  • 【Dual Function】Wash and Cure 2 in 1 design makes washing and curing for 3D printed models realized in one machine. The operating process is now more efficient with less effort to meet your different needs.
  • 【Fexible Washing Mode】The models can be placed in the cleaning basket to clearn separately, or mount the build plate with models on it and wash them together, which can avoid direct contact to uncured resin. The height of the platform bracket can be adjusted to fit the liquid level in the bucket.
  • 【Intelligent Curing Control】Built-in 8pcs 385nm plus 8pcs 405nm UV curing lamp beads, work together with the 360-degree rotating curing turntable, which can cure the models evenly. 0.96 inch TFT LCD screen can visually display the set time and the remaining time. With automatic protection, picking up the cover in the operating state will suspend operation and emit a beeping sound. The cover can block 99.95% of ultraviolet rays to protect your vision.
  • 【Ideal Compatity 】Compatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, Mars Pro, Mars C, Photon, Photon S on the market, which provides you an ideal support for your 3D resin prints.
  • 【Special Notes 】The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.
Best
Aibecy Anet 3D Printer Parts End Stop Endstop Limit Switches Plug Control with 24AWG Cable 2 Pins Switch for Anet A8 Plus Desktop 3D Printer
  • The endstop Limit Switches kit fits for Anet A8 Plus 3D printer.
  • The package includes 3pcs limit switches(2pin), one of one with pulley and the other two without pulley; 3pcs cables, 750mm(1pcs) and 500mm(2pcs).
  • Triggering is sensitive, repeat positioning is in high accuracy, with a longer service life.
  • Small size, easy installation, just plug and play.
  • 100% brand new and high quality, perfect 3D printer parts.
Best
ELEGOO Mercury Curing Machine 405nm Resin Curing Box with Light Driven Turntable for LCD DLP SLA 3D Printed Model
  • 【Intelligent Time Control】The LED time display enable you to control the curing time conveniently.
  • 【Light Driven Turntable】The light driven turntable is able to absorb LED light to rotate without battery.
  • 【Reflective Sheet】There is reflective sheet inside the cabinet which have the lights focused to get a better curing effect.
  • 【See-through Window】The see-through window not only assists you to observe the curing process, but also help keep the LED light away from leakage.
  • 【Two 405nm LED Strip】ELEGOO Mercury curing box adopts two 405nm LED strip (14 LED light in total) to fast cure and evenly illuminate printed models.
Best
ELEGOO Mars 2 Mono MSLA 3D Printer UV Photocuring LCD Resin 3D Printer with 6.08 inch 2K Monochrome LCD, Printing Size 129 * 80 * 150mm / 5.08 * 3.15 * 5.90inch
  • 【Fast Printing and less maintenance】Mars 2 comes with a 6.08 inch monochrome LCD of 2K HD resolution and only takes 2 seconds per layer exposure to cure resin, which could significantly enhance your printing efficiency. Mono LCD has a much longer lifespan and stable performance during long term printing, thus saves your cost.
  • 【Outstanding prints and ultra accurcy】Brand new light source structure provides more even UV light emission and working together with 2K mono LCD, the printing details and precision are greatly improved and the 3D printed models are fascinating.
  • 【Sturdy build quality】CNC machined aluminum body makes Mars 2 a very formidable machine. Newly-designed sandblasted build plate has a much stronger adherence during printing and enables consistent printing success. Built-in active carbon could absorb the fume of resin and offer you a refreshing printing experience.
  • 【Multi language interface】Mars 2 now supports 12 kinds of languages so customers across the world could operate the 3D printer more conveniently without barries.The newly added 10 languages are Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish and Portuguese.
  • 【Warranty and Service】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded).

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Plus 2 3d printer

Here is the ranking of the best Plus 2 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Plus 2 3d printer and read the reviews left by real customers, see the Plus 2 3d printer ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Plus 2 3d printer New
3D Printer Photon Plus Size 2K Screen Off-Line Print LCD 405nm Resin Desktop 3D Printer Kit (Color : PhotonAdd3L5F)
  • 【REMOVABLE BUILD SURFACE PLATE】Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • 【OPEN SOURCE】 comgrow creality In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all.
  • 【EXTRA LARGE】This printer comes with one of the largest build spaces available.you can print models that 90% of other printers could not. The unique creality 3d printer extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints.
  • 【New Aluminum Frame Resume Printing】metal 3d printer Better printing quality and durable with sturdy new frame. Stylish outlook. Resume printing after power loss; Filament run out detection system automatically suspends printing when the filament runs out.
  • 【Warranty and Support】we devoted to developing all kinds of 3d printers, diy 3d printer we have a professional tech and after-sale team and provide 12 months warranty and 24hrs technical support.
Plus 2 3d printer New
3D Printer Photon Plus Size 2K Screen Off-Line Print LCD 405nm Resin Desktop 3D Printer Kit (Color : PhotonAdd2L)
  • 【REMOVABLE BUILD SURFACE PLATE】Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • 【OPEN SOURCE】 comgrow creality In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all.
  • 【EXTRA LARGE】This printer comes with one of the largest build spaces available.you can print models that 90% of other printers could not. The unique creality 3d printer extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints.
  • 【New Aluminum Frame Resume Printing】metal 3d printer Better printing quality and durable with sturdy new frame. Stylish outlook. Resume printing after power loss; Filament run out detection system automatically suspends printing when the filament runs out.
  • 【Warranty and Support】we devoted to developing all kinds of 3d printers, diy 3d printer we have a professional tech and after-sale team and provide 12 months warranty and 24hrs technical support.
Plus 2 3d printer New
Plus 2 3d printer New
Womens Rings of Saturn Casual Plus Size Tee T-Shirts Short-Sleeve Lively Tee Top,White,5X-Large
  • Material: 100% Cotton. Adult short sleeve shirt, lightweight material and relaxed fit.
  • Size: S-XXL. Please Check The Size Details On The Product Description And Make Sure The Item Fits You Well.
  • Design: Stylish and fashion Print design make you more attractive. We are pioneers of water based ink and have perfected it's use to create photo-realistic imagery that is Not attainable by other screen printers.
  • Occasion: Charming & Novelty & Vogue Design & Modern Fit, Premium Quality Heavyweight Shirt,Professionally Printed. Perfect for leisure, travel, daily life,casual outtings, office, school, party, club anywhere. I am sure you will like it!
  • Deliver Time: 7-15 Days! If You Have Any Problem About Our Items,Please Send Message To Us,We Will Try To Our Best Service To Resolve Your Issues.We Will Respond To You Within 24 Hours.
Plus 2 3d printer New
3D Printer Photon Plus Size 2K Screen Off-Line Print LCD 405nm Resin Desktop 3D Printer Kit (Color : Photon)
  • 【REMOVABLE BUILD SURFACE PLATE】Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • 【OPEN SOURCE】 comgrow creality In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all.
  • 【EXTRA LARGE】This printer comes with one of the largest build spaces available.you can print models that 90% of other printers could not. The unique creality 3d printer extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints.
  • 【New Aluminum Frame Resume Printing】metal 3d printer Better printing quality and durable with sturdy new frame. Stylish outlook. Resume printing after power loss; Filament run out detection system automatically suspends printing when the filament runs out.
  • 【Warranty and Support】we devoted to developing all kinds of 3d printers, diy 3d printer we have a professional tech and after-sale team and provide 12 months warranty and 24hrs technical support.
Plus 2 3d printer New
Plus 2 3d printer New
Plus 2 3d printer New
3D Printer Photon Plus Size 2K Screen Off-Line Print LCD 405nm Resin Desktop 3D Printer Kit (Color : PhotonAdd1L)
  • 【REMOVABLE BUILD SURFACE PLATE】Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • 【OPEN SOURCE】 comgrow creality In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all.
  • 【EXTRA LARGE】This printer comes with one of the largest build spaces available.you can print models that 90% of other printers could not. The unique creality 3d printer extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints.
  • 【New Aluminum Frame Resume Printing】metal 3d printer Better printing quality and durable with sturdy new frame. Stylish outlook. Resume printing after power loss; Filament run out detection system automatically suspends printing when the filament runs out.
  • 【Warranty and Support】we devoted to developing all kinds of 3d printers, diy 3d printer we have a professional tech and after-sale team and provide 12 months warranty and 24hrs technical support.
Plus 2 3d printer New
3D Printer Photon Plus Size 2K Screen Off-Line Print LCD 405nm Resin Desktop 3D Printer Kit (Color : PhotonAddWashMachine)
  • 【REMOVABLE BUILD SURFACE PLATE】Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • 【OPEN SOURCE】 comgrow creality In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all.
  • 【EXTRA LARGE】This printer comes with one of the largest build spaces available.you can print models that 90% of other printers could not. The unique creality 3d printer extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints.
  • 【New Aluminum Frame Resume Printing】metal 3d printer Better printing quality and durable with sturdy new frame. Stylish outlook. Resume printing after power loss; Filament run out detection system automatically suspends printing when the filament runs out.
  • 【Warranty and Support】we devoted to developing all kinds of 3d printers, diy 3d printer we have a professional tech and after-sale team and provide 12 months warranty and 24hrs technical support.

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Plus 2 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Plus 2 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

Fltaheroo 3D Printer Accessories Power Emergency and Power Supply Units PSU 24V 250W for Prusa I3 MK3 MK3S
  • Fully assambled module plus a PSU power cord including Power Panic.
  • Item Type: Power Supply
  • Model Number: PSU 24V
Industrial Control Components, PCB Adapter Board, Practical Convenient Durable Reliable Small Size Strong For I3 Plus MK2 D6 PLUS Prevent Printing Errors D9
  • Support memory card and U disk printing, you can preview the model to prevent printing errors.
  • This monitoring function is to use the camera to view on the APP side of the mobile phone.
  • The mobile phone APP can operate the device to print, check the printing status, and control the device to jog.
  • Through the timing image recording and printing process, when the model fails to print, the relevant information is recorded.
  • Can be connected to a wireless LAN to perform APP operations and firmware updates.
Gesh Creality Upgrade Aluminum Hot Bed Finger Screw Nut Accessory Kit for Ender 3/3 Pro/3 X/3 V2, Ender 5/5 Plus
  • NOTE 1: The springs are around 25mm long, which is longer than ender 3 and ender 3 pro printer springs. You can use a tool to cut it to be shorter if you really like this product or adjust the hot bed to be higher to fit the springs.
  • NOTE 2: The length of screws is 35mm, if your printer hot bed screws are 40mm, please adjust the hot bed lower and leveling again to print.
  • Upgraded aluminum hand twist level nut makes hot bed more stable and print platform leveling easier.
  • For Ender 3/3 Pro/3 X/3 V2, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR 10, CR-10 , CR-10S, CR 10S Pro,CR-10 Plus, CR-X/X Pro, CR 20 100% brand new,
WANGZHI TPU 3D Filament Flexible Soft 3D Printing material Filament flex 1.75mm Printer Modeling (Color : 1kg Pink, Size : Free)
  • 100% brand new and high quality
  • The filament is for 3D printing pen used to melt plastic at a high temperature
  • Used to draw 3D objects from the paper to real life

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Plus 2 3d printer actually costs.

Latest Plus 2 3d printer
ELEGOO Mercury Plus 2 in 1 Wash and Curing Machine for LCD/DLP/SLA 3D Printed Models Resin UV Curing Box with Rotary Curing Turntable and Washing Bucket
  • 【Dual Function】Wash and Cure 2 in 1 design makes washing and curing for 3D printed models realized in one machine. The operating process is now more efficient with less effort to meet your different needs.
  • 【Fexible Washing Mode】The models can be placed in the cleaning basket to clearn separately, or mount the build plate with models on it and wash them together, which can avoid direct contact to uncured resin. The height of the platform bracket can be adjusted to fit the liquid level in the bucket.
  • 【Intelligent Curing Control】Built-in 8pcs 385nm plus 8pcs 405nm UV curing lamp beads, work together with the 360-degree rotating curing turntable, which can cure the models evenly. 0.96 inch TFT LCD screen can visually display the set time and the remaining time. With automatic protection, picking up the cover in the operating state will suspend operation and emit a beeping sound. The cover can block 99.95% of ultraviolet rays to protect your vision.
  • 【Ideal Compatity 】Compatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, Mars Pro, Mars C, Photon, Photon S on the market, which provides you an ideal support for your 3D resin prints.
  • 【Special Notes 】The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.
DISCOUNTLatest Plus 2 3d printer
Creality Upgraded Ender 5 Plus V2.2.1 Silent Mainboard with TMC2208 Driver, Super Quiet Mute Motherboard for CR-10S/ CR-10 S4/ CR-10 S5/ CR-X/CR-20/ CR-20 PRO 3D Printer
  • Upgraded silent mainboard for creality ender 5 plus printer, just plug it in and you could start printing. If use for CR-10S/ CR-10 S4/ CR-10 S5/ CR-X/CR-20/ CR-20 PRO , please update the firmware first.
  • Super Quiet and Noise Reduction. Use TMC2208 Stepper Motor Drivers, which the key component to eliminate the printer's motor when printing.
  • Notice: This new upgraded silent mainboard does not currently come pre-installed on ender 5 plus.
  • Bootloader pre-installed. The firmware can be modified by Cura with the USB cable.
  • Concern for safety. Thermal runaway protection is enabled, if the temperature rises out of control, the printer will stop heating and halt automatically.
Latest Plus 2 3d printer
Aibecy Anet 3D Printer Parts End Stop Endstop Limit Switches Plug Control with 24AWG Cable 2 Pins Switch for Anet A8 Plus Desktop 3D Printer
  • The endstop Limit Switches kit fits for Anet A8 Plus 3D printer.
  • The package includes 3pcs limit switches(2pin), one of one with pulley and the other two without pulley; 3pcs cables, 750mm(1pcs) and 500mm(2pcs).
  • Triggering is sensitive, repeat positioning is in high accuracy, with a longer service life.
  • Small size, easy installation, just plug and play.
  • 100% brand new and high quality, perfect 3D printer parts.
Latest Plus 2 3d printer
Anet A8 Plus Upgraded High-precision DIY 3D Printer Self-assembly 300 * 300 * 350mm Large Print Size Aluminum Alloy Frame Moveable LCD Control Panel Over-current Protection Mainboard
  • 【Upgraded Printing Size & Operation Method】 printing size is enlarged to 300*300*350mm, and large enough to satisfy your creativity; the magnetic movable LCD control panel and convenient knob type control design make your operation more efficient and more flexible.
  • 【Upgraded aluminum alloy frame & Easier assembly】 Consist of more durable aluminum alloy frame; the Y axis is designed with double polished rods, and the Z axis with double threaded rods, which to achieve a breakthrough and upgrade of the structure and movement stability; the tightness of Z axis and Y axis belts can be freely adjusted and are more convenient to use.
  • 【Upgraded Heatbed & Mainboard】 Aluminum substrate heatbed comes with a glass panel, so that the printing is smooth without sharp edge and the model is easy to remove; the mainboard is added designs of over-current protection and short-circuit protection, with smaller current configuration, safer and more reliable.
  • 【Upgraded Filament Loading & Extruder Structure】 added automatically loading and unloading filament function, which is very easy to add or exchange filament.Using the patented extruder structure, the filament extruding is more smooth without clogging. Direct filament loading improves printing effect of TPU filament.
  • 【Wide Compatibility and Application】Compatible with various 1.75mm printing filaments like PLA, ABS, HIPS, TPU, wood, etc; widely used in architecture, medical, home decoration, industry, movie and other many fields.
Latest Plus 2 3d printer
Creality V2.2.1 Silent Mainboard with TMC2208 Drivers BootLoader Controller Motherboard for Ender 5 Plus CR-10S/ CR-10 S4/ CR-10 S5/ CR-X/CR-20/ CR-20 PRO CR-X 3D Printer
  • Upgraded mainboard v2.2 which is is quieter, more powerful and has excellent stability during printing , Compatible with Creality Ender 5 plus, CR-10S, CR-10 S4, CR-10 S5, CR-X, CR-20, CR-20 PRO 3D printer.
  • TMC2208 driver and the bootloader is pre-installed, Update the firmware with Arduino/Cura by using USB.
  • Firmware is pre-installed on this board, plug and play for Ender 5 plus, Support BLtouch
  • Thermal runaway protection is enabled. The mainboard optimizes the circuit and can effectively solve the heating problem and provide overheat protection.
  • Easy to operate. USB interface is suitable for use with E / X / Y / Z-axis motors.
DISCOUNTLatest Plus 2 3d printer
Aibecy XY-2 Pro 3D Printer Kit Fast Assembly 255 * 255 * 260mm Build Volume Support Auto Leveling Resume Print Filament Run Out Detection with 8G TF Card & PLA Filament 250g for TRONXY XY-2 Pro
  • 【Modular design, 3 Steps Assemble, Easy to assemble in 15 minutes】3 Steps: Connect Upper Bracket, Base (Already assembled), Touchscreen, easy to assemble in ten minutes. Back-shaped structure, stable and firm.Aluminum profile frame, which has strong structure and high stability. Assembly instruction video : https://www.youtube.com/watch?v=M9_8yu2meWY
  • 【Auto resume printing function and filament run out detection】Printer has resume printing function, when the power is restored, the printer will continue to print from the interruption point.Support filament run out detection, timely remind filament shortage or cut-off filament.
  • 【 Hot bed Auto leveling】High quality auto leveling sensor, ensure hot bed leveling, improve printing accuracy. Durable black sticker, easier to remove the model and don't be afraid to scratch the surface.
  • 【3.5 inches full color touchscreen,Print silent, still quiet working environment】With 3.5 inches full color touchscreen , easy to understand and operate. Double fans extruder head, better cooling effect, more stable printing, longer service life.
  • 【Larger print size】Max.255*255*260mm printing size( Popular Ender 3 pro in the market is 220*220*250mm), support various 1.75mm printing filaments like PLA, HIPS, WOOD, PC, PVC and more. Widely used in toy, architecture, furniture, education, medical, daily necessities and other fields.
Latest Plus 2 3d printer
ANYCUBIC 3D Printer, Photon S UV LCD Printer Photocuring Ultra Precision, Masking Technology 2K Screen Matrix 405nm UV Light Z-axis Dual Linear Rail Printing with Air Filtering System
  • 【2.8 Inch Color Touch Screen】Anycubic Photon S 3d Printer is equipped with 2.8 inch color touch screen. It support USB connectivity. The priting sizes: 115mm(L)*65mm(W)*165mm(H).It is updated and can support up to 8x anti-aliasing compared with the old version.
  • 【High Precision Printing】Anycubic Photon S features upgraded matrix uv lighting and Z-axis dual linear rail, which uniform distribution of energy and improves the stability of Z axis, so that it can allows high precise printing with more details.
  • 【Anycubic Slicer Software & Easy Levling】Anycubic Photon S supports self-developed slicer software. It's easy to use and fast to slice. Easy leveling with a few steps: lower the platform down to the screen, pull the paper to get the right adjustment and tighten the screw to get leveling done.
  • 【Silent Print & Air Purification System】It's silent during the printing process. You can sleep soundly even when the working 3d printer is placed by your side. The 3d printer is designed with dual fans for ventilation and use activated carbon to reduce the smell.
  • 【Customer Service Warranty】1 bottle of 500g resin (random color) is included. We promise to provide you with product repair warranty. If you have any problems with the product, you can contact Anycubic customer service. We have customer service in every workday.
Latest Plus 2 3d printer
SIQUK 22 Pieces 3D Printer Nozzles MK8 Nozzle 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Extruder Print Head with Free Storage Box for 3D Printer Makerbot Creality CR-10
  • Package include: totally 22 pcs MK8 nozzles in 7 sizes, 2 x 0.2mm, 2 x 0.3mm, 10 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm
  • Parameter: input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; out thread: M6
  • Applicability and compatibility: fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer
  • Premium material: the 3D printer nozzles are made of high quality brass material, sturdy and durable, connect with M6 out thread, easy to install
  • Attention: small accessories, please keep away from children
Latest Plus 2 3d printer
YOTINO 3D Printer Thermistor NTC 3950 100k Thermistor for Maker Select Plus and Wanhao Duplicator i3 Plus 3D Printers
  • Drop-in replacement for stock thermistor on MP Maker Select Plus / Wanhao Duplicator Plus
  • Also compatible with MP Maker Select V2.1 and Wanhao Duplicator V2.1
  • Easy to mount with M3 HEX stub
  • Can hold temperature up to 300C with ceramic glue and fiberglass insulation on leads
  • HX2.54 connector at end

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Plus 2 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Plus 2 3d printer which are among the cheapest on the market. Just scroll through the list to find Plus 2 3d printer the cheapest products.

Catalog

The product Plus 2 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.

Plus 2 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Plus 2 3d printer New
3D Printer Photon Plus Size 2K Screen Off-Line Print LCD 405nm Resin Desktop 3D Printer Kit (Color : PhotonAdd3L5F)
  • 【REMOVABLE BUILD SURFACE PLATE】Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • 【OPEN SOURCE】 comgrow creality In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all.
  • 【EXTRA LARGE】This printer comes with one of the largest build spaces available.you can print models that 90% of other printers could not. The unique creality 3d printer extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints.
  • 【New Aluminum Frame Resume Printing】metal 3d printer Better printing quality and durable with sturdy new frame. Stylish outlook. Resume printing after power loss; Filament run out detection system automatically suspends printing when the filament runs out.
  • 【Warranty and Support】we devoted to developing all kinds of 3d printers, diy 3d printer we have a professional tech and after-sale team and provide 12 months warranty and 24hrs technical support.
Plus 2 3d printer New
3D Printer Photon Plus Size 2K Screen Off-Line Print LCD 405nm Resin Desktop 3D Printer Kit (Color : PhotonAdd2L)
  • 【REMOVABLE BUILD SURFACE PLATE】Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • 【OPEN SOURCE】 comgrow creality In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all.
  • 【EXTRA LARGE】This printer comes with one of the largest build spaces available.you can print models that 90% of other printers could not. The unique creality 3d printer extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints.
  • 【New Aluminum Frame Resume Printing】metal 3d printer Better printing quality and durable with sturdy new frame. Stylish outlook. Resume printing after power loss; Filament run out detection system automatically suspends printing when the filament runs out.
  • 【Warranty and Support】we devoted to developing all kinds of 3d printers, diy 3d printer we have a professional tech and after-sale team and provide 12 months warranty and 24hrs technical support.
Plus 2 3d printer New
Plus 2 3d printer New
Womens Rings of Saturn Casual Plus Size Tee T-Shirts Short-Sleeve Lively Tee Top,White,5X-Large
  • Material: 100% Cotton. Adult short sleeve shirt, lightweight material and relaxed fit.
  • Size: S-XXL. Please Check The Size Details On The Product Description And Make Sure The Item Fits You Well.
  • Design: Stylish and fashion Print design make you more attractive. We are pioneers of water based ink and have perfected it's use to create photo-realistic imagery that is Not attainable by other screen printers.
  • Occasion: Charming & Novelty & Vogue Design & Modern Fit, Premium Quality Heavyweight Shirt,Professionally Printed. Perfect for leisure, travel, daily life,casual outtings, office, school, party, club anywhere. I am sure you will like it!
  • Deliver Time: 7-15 Days! If You Have Any Problem About Our Items,Please Send Message To Us,We Will Try To Our Best Service To Resolve Your Issues.We Will Respond To You Within 24 Hours.
Plus 2 3d printer New
3D Printer Photon Plus Size 2K Screen Off-Line Print LCD 405nm Resin Desktop 3D Printer Kit (Color : Photon)
  • 【REMOVABLE BUILD SURFACE PLATE】Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • 【OPEN SOURCE】 comgrow creality In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all.
  • 【EXTRA LARGE】This printer comes with one of the largest build spaces available.you can print models that 90% of other printers could not. The unique creality 3d printer extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints.
  • 【New Aluminum Frame Resume Printing】metal 3d printer Better printing quality and durable with sturdy new frame. Stylish outlook. Resume printing after power loss; Filament run out detection system automatically suspends printing when the filament runs out.
  • 【Warranty and Support】we devoted to developing all kinds of 3d printers, diy 3d printer we have a professional tech and after-sale team and provide 12 months warranty and 24hrs technical support.
Plus 2 3d printer New
Plus 2 3d printer New
Plus 2 3d printer New
3D Printer Photon Plus Size 2K Screen Off-Line Print LCD 405nm Resin Desktop 3D Printer Kit (Color : PhotonAdd1L)
  • 【REMOVABLE BUILD SURFACE PLATE】Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • 【OPEN SOURCE】 comgrow creality In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all.
  • 【EXTRA LARGE】This printer comes with one of the largest build spaces available.you can print models that 90% of other printers could not. The unique creality 3d printer extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints.
  • 【New Aluminum Frame Resume Printing】metal 3d printer Better printing quality and durable with sturdy new frame. Stylish outlook. Resume printing after power loss; Filament run out detection system automatically suspends printing when the filament runs out.
  • 【Warranty and Support】we devoted to developing all kinds of 3d printers, diy 3d printer we have a professional tech and after-sale team and provide 12 months warranty and 24hrs technical support.
Plus 2 3d printer New
3D Printer Photon Plus Size 2K Screen Off-Line Print LCD 405nm Resin Desktop 3D Printer Kit (Color : PhotonAddWashMachine)
  • 【REMOVABLE BUILD SURFACE PLATE】Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • 【OPEN SOURCE】 comgrow creality In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all.
  • 【EXTRA LARGE】This printer comes with one of the largest build spaces available.you can print models that 90% of other printers could not. The unique creality 3d printer extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints.
  • 【New Aluminum Frame Resume Printing】metal 3d printer Better printing quality and durable with sturdy new frame. Stylish outlook. Resume printing after power loss; Filament run out detection system automatically suspends printing when the filament runs out.
  • 【Warranty and Support】we devoted to developing all kinds of 3d printers, diy 3d printer we have a professional tech and after-sale team and provide 12 months warranty and 24hrs technical support.

Where to buy?

If you are asking yourself where to buy Plus 2 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Plus 2 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Plus 2 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Plus 2 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Plus 2 3d printer used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Plus 2 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

Fltaheroo 3D Printer Accessories Power Emergency and Power Supply Units PSU 24V 250W for Prusa I3 MK3 MK3S
  • Fully assambled module plus a PSU power cord including Power Panic.
  • Item Type: Power Supply
  • Model Number: PSU 24V
Industrial Control Components, PCB Adapter Board, Practical Convenient Durable Reliable Small Size Strong For I3 Plus MK2 D6 PLUS Prevent Printing Errors D9
  • Support memory card and U disk printing, you can preview the model to prevent printing errors.
  • This monitoring function is to use the camera to view on the APP side of the mobile phone.
  • The mobile phone APP can operate the device to print, check the printing status, and control the device to jog.
  • Through the timing image recording and printing process, when the model fails to print, the relevant information is recorded.
  • Can be connected to a wireless LAN to perform APP operations and firmware updates.
Gesh Creality Upgrade Aluminum Hot Bed Finger Screw Nut Accessory Kit for Ender 3/3 Pro/3 X/3 V2, Ender 5/5 Plus
  • NOTE 1: The springs are around 25mm long, which is longer than ender 3 and ender 3 pro printer springs. You can use a tool to cut it to be shorter if you really like this product or adjust the hot bed to be higher to fit the springs.
  • NOTE 2: The length of screws is 35mm, if your printer hot bed screws are 40mm, please adjust the hot bed lower and leveling again to print.
  • Upgraded aluminum hand twist level nut makes hot bed more stable and print platform leveling easier.
  • For Ender 3/3 Pro/3 X/3 V2, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR 10, CR-10 , CR-10S, CR 10S Pro,CR-10 Plus, CR-X/X Pro, CR 20 100% brand new,
WANGZHI TPU 3D Filament Flexible Soft 3D Printing material Filament flex 1.75mm Printer Modeling (Color : 1kg Pink, Size : Free)
  • 100% brand new and high quality
  • The filament is for 3D printing pen used to melt plastic at a high temperature
  • Used to draw 3D objects from the paper to real life

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Plus 2 3d printer.

Rating: 3.39 of 5 - 23 votes
1 Star2 Stars3 Stars4 Stars5 Stars (23 votes, average: 3.39 out of 5)
Loading...