Pinda 3d printer Reviews and Best Deals

Online product reviews and comparisons for Pinda 3d printer.

Latest Pinda 3d printer
PINDA sensor 5V Prusa i3 MK2 3D Printer M8 inductive sensor, Sn 2mm, NPN NC 5V DC
  • Finally! A 5V inductive sensor compatible with the Prusa i3 MK2. We had tried several in the past but with limited success. We were so excited when we tested this one, and it was virtually plug and play that we just had to add them to our range.
  • This product was tested on our in house Prusa i3 mK2, so we know it works.
  • This is a high quality industrial grade inductive sensor with a 5V input voltage, making it compatible with Mini Rambo as used on the Prusa i3 Mk2 & other controllers needing 5V sensors.
  • As an industrialised premium product, it has features that make it much more robust and durable than that originally fitted to the Prusa i3 MK2 in particular an additional shroud for strain relief.
  • 2mm sensing range gives improved temperature stability over other sensors, IP67 rated. Operating temperature -20°C~+70°C. Leakage current DC:≤0.01mA no-Load. Residual votage DC:≤1.5VDC No-load Lead length 800mm terminated by standard 3 pin Molex to fit Mini-Rambo and similar controllers PLEASE NOTE: the 2mm range is for Ferrous materials such as steel, ranges for other materials such as Aluminium may be considerably less. Not recommended for glass surfaces.
Latest Pinda 3d printer
Latest Pinda 3d printer
Latest Pinda 3d printer
Latest Pinda 3d printer
WEI-LUONG 3D Printer Einsy Rambo 1.1A Mainboard+2004 Lcd+Filament Sensor+ Pinda V2+Power Panic Board for Prusa I3 Mk3 Computer
  • For Prusa i3 MK3
  • Item Type: Motherboard
  • Our products are sold worldwide and are highly regarded. We have very high quality standards for our products, if you have any questions about our products, please contact us. We will reply within 24 hours.
Latest Pinda 3d printer
Latest Pinda 3d printer
P.I.N.D.A V2 PINDA Sensor Auto Bed Leveling Sensor Probe 4PIN for Prusa i3 MK3 MK2/2.5 3D Printer
  • This is the P.I.N.D.A probe version 2 used in the Prusa i3 Mk3 3D Printers.This probe is exactly the correct probe and has been tested with same electronics and firmware as the original probe and works to same effect.Wire length and molex connector included.
  • Package: 1piece
Latest Pinda 3d printer
Latest Pinda 3d printer
Toaiot 3D Printer Parts Prusa i3 MK2.5 MK3 PINDA V2 Auto Leveling Sensor Probe 4 Pin for Reprap
  • This is the P.I.N.D.A probe version 2 used in the Prusa i3 Mk3 mk2.5 3D Printers.
  • The cable just fit for MK3 and MK2.5 only! not for Old version
  • Wire length :800mm/31.4 inch,Supply Voltage:4-30V
  • This probe is exactly the correct probe and has been tested with same electronics and firmware as the original probe and works to same effect.
  • After-sales service: If you encounter any defective products, we will provide you with a replacement or refund for free, if you encounter technical problems,Please contact us,We will do our best to help you!

Buy Pinda 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Pinda 3d printer, buy Pinda 3d printer directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Pinda 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


Best
Feixunfan 3D Printer Mainboard 3D Printer Part 1.1b Mainboard+PC MMU2.0 Board+Filament Sensor+Power Socket+2004 LCD Display+PINDA V2 Kit For Cnc Machine (Color : Black, Size : One size)
  • Compared with the previous motherboard, it is quieter and less noisy; provides overheat protection, circuit optimization, and effectively solves heating problems.
  • In addition, we are working on a firmware update that will allow printing of older MK3 G-codes in MMU2 single mode.
  • MMU 2.0 supports printing in single mode, which works in the same way as printing on a standard MK3 machine.
  • For example, they can be used to calibrate the length of the PTFE tube.
  • The new MMU 2.0 has a direct feed drive and motorized head selection with an integrated filament sensor that takes care of loading and unloading fibers.
Best
AMX3d 25 Piece 3D Printer Tool Kit - All the 3D Printing Tools needed to clean & finish 3D Prints - Print like a Pro
  • If you have a 3D Printer or are thinking of buying one - these are the tools you need to make your prints look like those on the 3D Printer Box.
  • 25 Essential tools for all 3D Printing Professionals, Hobbyists and Makers
  • Everything needed to print, maintain and clean up 3D Models in one convenient kit
  • This kit has everything to make 3D printing easy and the printed results spectacular.
  • The best 3D Prints start with the best tools
Best
3D Printer Prusa i3 MK2/MK2s to MK2.5 Upgrade V-Cables Left hotend Fan and PINDA V2
  • The original Prusa i3 MK2.5 upgraded version has made some improvements to the MK3, but the number of pins on the connector on the RAMBo 13a (10a) board is insufficient. Using v cable, we split a cable into two connectors
  • package:
  • 1*V type cable for left hot air fan and PINDA V2 probe
  • Item type: cable/wire
Best
sourcingmap 4mm Inductive Proximity Sensor Switch Detector PNP NC DC 6-36V 200mA 3-wire LJ12A3-4-Z/AY for 3D Printer Probe Bed Leveling,MCU Board
  • 【Specification】: Detecting Distance: 4mm; Supply Voltage: DC 6-30V; Current Output : 200mA; Detect Object : Iron; Thread Size: 12mm.
  • Wire Type: DC 3 Wire Type (Black, Brown, Blue); Switch Appearance Type: Cylinder Type; Theory: Inductive Sensor; Output Type: PNP NC(Normal Close).
  • 【Sensitive Detection】: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal.
  • 【Material】: Brass nickel-plated shell, not easy to rust and fade. With 120CM high-quality copper wire, strong and durable, and excellent electrical conductivity.
  • 【Application】: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is Widely used in mechanical automation, 3D Printer Probe Bed Leveling, paper making, light industry for limiting station, orientation taking count, speeding trial etc.
Best
sourcingmap 10mm Inductive Proximity Sensor Switch Detector NPN NO DC 6-36V 300mA 3-Wire TL-N10ME1 for 3D Printer Probe Bed Leveling,MCU Board
  • 【Specification】: Detecting Distance: 10mm; Supply Voltage: DC 6-36V; Current Output : 300mA; Detect Object : Iron.
  • Wire Type: DC 3 Wire Type (Black, Brown, Blue); Switch Appearance Type: Rectangular Type; Theory: Inductive Sensor; Output Type: NPN NO(Nomal Open).
  • 【Sensitive Detection】: ABS material detection surface, the built-in intelligent sensing chip of the proximity switch can sensitively detect objects, when proximity switch is close to single target object, it will send control signal.
  • 【Material】: Brass nickel-plated shell, not easy to rust and fade. With 120CM high-quality copper wire, strong and durable, and excellent electrical conductivity.
  • 【Application】: It is a component widely used in automatic control industry for detecting, controlling, and contactless switching. It is Widely used in mechanical automation, 3D Printer Probe Bed Leveling, paper making, light industry for limiting station, orientation taking count, speeding trial etc.

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Pinda 3d printer

Here is the ranking of the best Pinda 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Pinda 3d printer and read the reviews left by real customers, see the Pinda 3d printer ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Pinda 3d printer New
Wosune Black Probe, 3D Printer Probe, for Prusa 3D Printer Mk2s
  • Made of high-quality metal + ABS, this probe is and strong.
  • Made of excellent technology, this product has good anti-pull characteristics and is not easy to break.
  • This product is small and light, easy to install and easy to use.
  • 3D Printer P.I.N.D.A. The probe is a level sensor that helps the 3D printer to perform better.
  • Compatible with for rambo mini and for Prusa i3 mk2 / mk2s DIY 3D printers.
Pinda 3d printer New
Proximity Switch, 5mm Metal Distance Measuring Inductive Proximity Sensor Switch DC 3 Wires NO PNP TL-Q5MB1 for Machine, Paper Making
  • 【Widely Application】The inductive proximity sensor switch is widely used in machine, paper making, light industry for limiting station, orientation taking count, speeding trial etc
  • 【Functions】The sensor switch is designed for automatic control industry for detecting, controlling, and non-contact switching
  • 【Compatible with】Proximity switch is a position sensor with switch output that can be connected with microcomputer
  • 【Safe to Use】When proximity switch is close to some target object, it will send out control signal. It also can drive directly from, electromagnetic relays, counters and contactor to achieve automatic control purposes
  • 【Brand New】100% brand new high quality proximity switch, strictly full tested to ensure the best quality before shipment, safe to use
Pinda 3d printer New
For Prusa i3 MK2/MK2s to MK2.5 upgrade V-cables left hotend fan and PINDA V2 probe 3D Printer Parts
  • Package:1pc*V-cable for left hotend fan and PINDA V2 Probe
  • For Prusa i3 MK5 upgrade brings several improvements from the MK3, however, there are not enough pins on the on RAMBo 13a(10a) board's connectors. Using v-cables we will split one cable into two connectors
  • The product has undergone extensive testing and quality assurance.
Pinda 3d printer New
3d printer DIY for Prusa i3 mk2/mk2s 3d printer compatiable with mini-rambo PINDA leveling probe 3D Printer Parts
  • For Prusa i3 mk2/mk2s 3d printer
  • The product has undergone extensive testing and quality assurance.
Pinda 3d printer New
Mk2/mk2s P.I.N.D.A. Probe Compatiable With mini-rambo For DIY Prusa i3 mk2/mk2s 3D Printer 3D Printer Parts
  • Model Number: Prusa i3 mk2/mk2s P.I.N.D.A. Probe
  • Item Type: Leveling Modules
  • The product has undergone extensive testing and quality assurance.
Pinda 3d printer New
Printer Accessories Mk2/mk2s P.I.N.D.A. Probe Compatiable with Mini-Rambo for DIY Prusa i3 mk2/mk2s 3D Printer 3D Printer Parts
  • Model Number: Prusa i3 mk2/mk2s P.I.N.D.A. Probe
  • Item Type: Leveling Modules
  • We are a professional manufacturer of printer accessories. If you have any questions about the product, do not hesitate to send us an email.
Pinda 3d printer New
1Set Laser Sensor 3D Printer Filament Sensor Detect Stuck Filament With Cable And PINDA V2 Sensor Kit For Prusa i3 MK3 3D Printer Parts
  • Model Number: Filament Sensor
  • Item Type: Sensor
  • The product has undergone extensive testing and quality assurance.
Pinda 3d printer New
5PCS V3.0 Stepper Motor Driver 3D Printer Parts TMC2130 TMC2209 TMC5160 Fit For SKR V1.3 V1.4 MKS GEN Ramps 1.4 (Color : UART mode) (Color : Uart Mode)
  • Item Type: Driver
  • The quality is good, every detail is done carefully, and the effect is good.
  • Tighten the M2x8 screw, the sensor shouldn't be able to move, but be careful the PCB isn't indestructible ;)Place the IR-sensor on the top of the Extruder-body and secure it with the M2x8.
  • The product has undergone extensive testing and quality assurance.
Pinda 3d printer New
YHtech 3D Printer Einsy Rambo 1.1A Mainboard+2004 Lcd+Filament Sensor+ Pinda V2+Power Panic Board for Prusa I3 Mk3 Tools
  • For Prusa i3 MK3
  • Item Type: Motherboard
  • We are a professional Amazon store. If you have any questions, you can contact us at any time. We sincerely create a good buying experience for every customer who comes to each store.

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Pinda 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Pinda 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

3d printer DIY for Prusa i3 mk2/mk2s 3d printer compatiable with mini-rambo PINDA leveling probe 3D Printer Parts
  • For Prusa i3 mk2/mk2s 3d printer
  • The product has undergone extensive testing and quality assurance.
For Prusa i3 MK2/MK2s to MK2.5 upgrade V-cables left hotend fan and PINDA V2 probe 3D Printer Parts
  • Package:1pc*V-cable for left hotend fan and PINDA V2 Probe
  • For Prusa i3 MK5 upgrade brings several improvements from the MK3, however, there are not enough pins on the on RAMBo 13a(10a) board's connectors. Using v-cables we will split one cable into two connectors
  • The product has undergone extensive testing and quality assurance.
Mk2/mk2s P.I.N.D.A. Probe Compatiable With mini-rambo For DIY Prusa i3 mk2/mk2s 3D Printer 3D Printer Parts
  • Model Number: Prusa i3 mk2/mk2s P.I.N.D.A. Probe
  • Item Type: Leveling Modules
  • The product has undergone extensive testing and quality assurance.
5PCS V3.0 Stepper Motor Driver 3D Printer Parts TMC2130 TMC2209 TMC5160 Fit For SKR V1.3 V1.4 MKS GEN Ramps 1.4 (Color : UART mode) (Color : Uart Mode)
  • Item Type: Driver
  • The quality is good, every detail is done carefully, and the effect is good.
  • Tighten the M2x8 screw, the sensor shouldn't be able to move, but be careful the PCB isn't indestructible ;)Place the IR-sensor on the top of the Extruder-body and secure it with the M2x8.
  • The product has undergone extensive testing and quality assurance.
1Set Laser Sensor 3D Printer Filament Sensor Detect Stuck Filament With Cable And PINDA V2 Sensor Kit For Prusa i3 MK3 3D Printer Parts
  • Model Number: Filament Sensor
  • Item Type: Sensor
  • The product has undergone extensive testing and quality assurance.

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Pinda 3d printer actually costs.

Latest Pinda 3d printer
PINDA sensor 5V Prusa i3 MK2 3D Printer M8 inductive sensor, Sn 2mm, NPN NC 5V DC
  • Finally! A 5V inductive sensor compatible with the Prusa i3 MK2. We had tried several in the past but with limited success. We were so excited when we tested this one, and it was virtually plug and play that we just had to add them to our range.
  • This product was tested on our in house Prusa i3 mK2, so we know it works.
  • This is a high quality industrial grade inductive sensor with a 5V input voltage, making it compatible with Mini Rambo as used on the Prusa i3 Mk2 & other controllers needing 5V sensors.
  • As an industrialised premium product, it has features that make it much more robust and durable than that originally fitted to the Prusa i3 MK2 in particular an additional shroud for strain relief.
  • 2mm sensing range gives improved temperature stability over other sensors, IP67 rated. Operating temperature -20°C~+70°C. Leakage current DC:≤0.01mA no-Load. Residual votage DC:≤1.5VDC No-load Lead length 800mm terminated by standard 3 pin Molex to fit Mini-Rambo and similar controllers PLEASE NOTE: the 2mm range is for Ferrous materials such as steel, ranges for other materials such as Aluminium may be considerably less. Not recommended for glass surfaces.
Latest Pinda 3d printer
Latest Pinda 3d printer
Latest Pinda 3d printer
Latest Pinda 3d printer
WEI-LUONG 3D Printer Einsy Rambo 1.1A Mainboard+2004 Lcd+Filament Sensor+ Pinda V2+Power Panic Board for Prusa I3 Mk3 Computer
  • For Prusa i3 MK3
  • Item Type: Motherboard
  • Our products are sold worldwide and are highly regarded. We have very high quality standards for our products, if you have any questions about our products, please contact us. We will reply within 24 hours.
Latest Pinda 3d printer
Latest Pinda 3d printer
P.I.N.D.A V2 PINDA Sensor Auto Bed Leveling Sensor Probe 4PIN for Prusa i3 MK3 MK2/2.5 3D Printer
  • This is the P.I.N.D.A probe version 2 used in the Prusa i3 Mk3 3D Printers.This probe is exactly the correct probe and has been tested with same electronics and firmware as the original probe and works to same effect.Wire length and molex connector included.
  • Package: 1piece
Latest Pinda 3d printer
Latest Pinda 3d printer
Toaiot 3D Printer Parts Prusa i3 MK2.5 MK3 PINDA V2 Auto Leveling Sensor Probe 4 Pin for Reprap
  • This is the P.I.N.D.A probe version 2 used in the Prusa i3 Mk3 mk2.5 3D Printers.
  • The cable just fit for MK3 and MK2.5 only! not for Old version
  • Wire length :800mm/31.4 inch,Supply Voltage:4-30V
  • This probe is exactly the correct probe and has been tested with same electronics and firmware as the original probe and works to same effect.
  • After-sales service: If you encounter any defective products, we will provide you with a replacement or refund for free, if you encounter technical problems,Please contact us,We will do our best to help you!

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Pinda 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Pinda 3d printer which are among the cheapest on the market. Just scroll through the list to find Pinda 3d printer the cheapest products.

Catalog

The product Pinda 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.

Pinda 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Pinda 3d printer New
Wosune Black Probe, 3D Printer Probe, for Prusa 3D Printer Mk2s
  • Made of high-quality metal + ABS, this probe is and strong.
  • Made of excellent technology, this product has good anti-pull characteristics and is not easy to break.
  • This product is small and light, easy to install and easy to use.
  • 3D Printer P.I.N.D.A. The probe is a level sensor that helps the 3D printer to perform better.
  • Compatible with for rambo mini and for Prusa i3 mk2 / mk2s DIY 3D printers.
Pinda 3d printer New
Proximity Switch, 5mm Metal Distance Measuring Inductive Proximity Sensor Switch DC 3 Wires NO PNP TL-Q5MB1 for Machine, Paper Making
  • 【Widely Application】The inductive proximity sensor switch is widely used in machine, paper making, light industry for limiting station, orientation taking count, speeding trial etc
  • 【Functions】The sensor switch is designed for automatic control industry for detecting, controlling, and non-contact switching
  • 【Compatible with】Proximity switch is a position sensor with switch output that can be connected with microcomputer
  • 【Safe to Use】When proximity switch is close to some target object, it will send out control signal. It also can drive directly from, electromagnetic relays, counters and contactor to achieve automatic control purposes
  • 【Brand New】100% brand new high quality proximity switch, strictly full tested to ensure the best quality before shipment, safe to use
Pinda 3d printer New
For Prusa i3 MK2/MK2s to MK2.5 upgrade V-cables left hotend fan and PINDA V2 probe 3D Printer Parts
  • Package:1pc*V-cable for left hotend fan and PINDA V2 Probe
  • For Prusa i3 MK5 upgrade brings several improvements from the MK3, however, there are not enough pins on the on RAMBo 13a(10a) board's connectors. Using v-cables we will split one cable into two connectors
  • The product has undergone extensive testing and quality assurance.
Pinda 3d printer New
3d printer DIY for Prusa i3 mk2/mk2s 3d printer compatiable with mini-rambo PINDA leveling probe 3D Printer Parts
  • For Prusa i3 mk2/mk2s 3d printer
  • The product has undergone extensive testing and quality assurance.
Pinda 3d printer New
Mk2/mk2s P.I.N.D.A. Probe Compatiable With mini-rambo For DIY Prusa i3 mk2/mk2s 3D Printer 3D Printer Parts
  • Model Number: Prusa i3 mk2/mk2s P.I.N.D.A. Probe
  • Item Type: Leveling Modules
  • The product has undergone extensive testing and quality assurance.
Pinda 3d printer New
Printer Accessories Mk2/mk2s P.I.N.D.A. Probe Compatiable with Mini-Rambo for DIY Prusa i3 mk2/mk2s 3D Printer 3D Printer Parts
  • Model Number: Prusa i3 mk2/mk2s P.I.N.D.A. Probe
  • Item Type: Leveling Modules
  • We are a professional manufacturer of printer accessories. If you have any questions about the product, do not hesitate to send us an email.
Pinda 3d printer New
1Set Laser Sensor 3D Printer Filament Sensor Detect Stuck Filament With Cable And PINDA V2 Sensor Kit For Prusa i3 MK3 3D Printer Parts
  • Model Number: Filament Sensor
  • Item Type: Sensor
  • The product has undergone extensive testing and quality assurance.
Pinda 3d printer New
5PCS V3.0 Stepper Motor Driver 3D Printer Parts TMC2130 TMC2209 TMC5160 Fit For SKR V1.3 V1.4 MKS GEN Ramps 1.4 (Color : UART mode) (Color : Uart Mode)
  • Item Type: Driver
  • The quality is good, every detail is done carefully, and the effect is good.
  • Tighten the M2x8 screw, the sensor shouldn't be able to move, but be careful the PCB isn't indestructible ;)Place the IR-sensor on the top of the Extruder-body and secure it with the M2x8.
  • The product has undergone extensive testing and quality assurance.
Pinda 3d printer New
YHtech 3D Printer Einsy Rambo 1.1A Mainboard+2004 Lcd+Filament Sensor+ Pinda V2+Power Panic Board for Prusa I3 Mk3 Tools
  • For Prusa i3 MK3
  • Item Type: Motherboard
  • We are a professional Amazon store. If you have any questions, you can contact us at any time. We sincerely create a good buying experience for every customer who comes to each store.

Where to buy?

If you are asking yourself where to buy Pinda 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Pinda 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Pinda 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Pinda 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Pinda 3d printer used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Pinda 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

3d printer DIY for Prusa i3 mk2/mk2s 3d printer compatiable with mini-rambo PINDA leveling probe 3D Printer Parts
  • For Prusa i3 mk2/mk2s 3d printer
  • The product has undergone extensive testing and quality assurance.
For Prusa i3 MK2/MK2s to MK2.5 upgrade V-cables left hotend fan and PINDA V2 probe 3D Printer Parts
  • Package:1pc*V-cable for left hotend fan and PINDA V2 Probe
  • For Prusa i3 MK5 upgrade brings several improvements from the MK3, however, there are not enough pins on the on RAMBo 13a(10a) board's connectors. Using v-cables we will split one cable into two connectors
  • The product has undergone extensive testing and quality assurance.
Mk2/mk2s P.I.N.D.A. Probe Compatiable With mini-rambo For DIY Prusa i3 mk2/mk2s 3D Printer 3D Printer Parts
  • Model Number: Prusa i3 mk2/mk2s P.I.N.D.A. Probe
  • Item Type: Leveling Modules
  • The product has undergone extensive testing and quality assurance.
5PCS V3.0 Stepper Motor Driver 3D Printer Parts TMC2130 TMC2209 TMC5160 Fit For SKR V1.3 V1.4 MKS GEN Ramps 1.4 (Color : UART mode) (Color : Uart Mode)
  • Item Type: Driver
  • The quality is good, every detail is done carefully, and the effect is good.
  • Tighten the M2x8 screw, the sensor shouldn't be able to move, but be careful the PCB isn't indestructible ;)Place the IR-sensor on the top of the Extruder-body and secure it with the M2x8.
  • The product has undergone extensive testing and quality assurance.
1Set Laser Sensor 3D Printer Filament Sensor Detect Stuck Filament With Cable And PINDA V2 Sensor Kit For Prusa i3 MK3 3D Printer Parts
  • Model Number: Filament Sensor
  • Item Type: Sensor
  • The product has undergone extensive testing and quality assurance.

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Pinda 3d printer.

Rating: 3.26 of 5 - 23 votes
1 Star2 Stars3 Stars4 Stars5 Stars (23 votes, average: 3.26 out of 5)
Loading...