Piezo 3d printer Reviews and Best Deals

Online product reviews and comparisons for Piezo 3d printer.

Latest Piezo 3d printer
AMONIDA 【𝐄𝐚𝐬𝐭𝐞𝐫】 Extruder, Extruder Hot End Set, Precise Firm Compact Aluminum Alloy Offices Printers for Home Use 3D Printers
  • The extruder kit is compact and exquisite, easy to install, stable and firm, and the quality is guaranteed.
  • This extruder kit is suitable for various printers and is an indispensable part.
  • The extruder hot end kit is widely used in the field of 3D printers and is an indispensable accessory for printers.
  • This 3D printer's extruder hot‑end kit has a strong heat dissipation function and precise printing.
  • Extruder's excellent thermal insulation performance increases structural rigidity.
DISCOUNTLatest Piezo 3d printer
SIQUK 3 Pieces Teflon Tube PTFE Blue Tubing(1.5 Meters) with 3 Pieces PC4-M6 Fittings and 3 Pieces PC4-M10 Male Straight Pneumatic PEFE Tube Push Fitting Connector for 3D Printer 1.75mm Filament
  • PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm
  • Premium material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper; PC4-M10 Fittings is made of stainless steel
  • Attention - small 3D printer accessories, please keep away from children
Latest Piezo 3d printer
Latest Piezo 3d printer
5pcs NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for RepRap 3D Printer Heatbed or Hot End
  • Pack of 5PCS
  • Temperature sensor 100KΩ accuracy of ± 1%
  • Wiring length: 1 meter
  • Use it with heated bed or extruder
  • Conviniently pre-wired with 1 meter long high temperature PTFE insulated wiring
Latest Piezo 3d printer
YOTINO 2 Pcs PTFE Teflon Tube (1 Meter) with 4 Pcs PC4-M10 Straight Pneumatic Quick Fitting Push to Connect for 3D Printer 1.75mm Filament (2.0mm ID/4.0mm OD)
  • [Teflon Tube] Outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3; it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260℃
  • [PC4-M10 fittings] Thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of stainless steel and plastic, high hardness, antioxidtion, anti corrosion.
  • [Strong Compatibility] This PTFE tube compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8
  • [Easy to Install] These 3D printer accessories are able to bear stronger impulse but won't tripping, Connecting by the outer thread of the quick fitting, easy to install.
  • [Package include] 2x 1M PTFE Teflon Bowden Tube(2.0mm ID/4.0mm OD) + 4x PC4-M10 Fittings
Latest Piezo 3d printer
Sovol 3D Printer Resin Vat 2 Pack Anodized Aluminium with FEP Film and Steel Ring Preinstalled, Durable Metal Frame Resin Tank with Double Silicone Covers for ELEGOO Mars ANYCUBIC Photon 3D Printer
  • Sovol 3D resin vat fits for ELEGOO Mars/Mars C/Mars Pro/Mars 2 Pro, Anycubic Photon/Photon S/Photon Mono/Photon Mono Se, QIDI TECH Shadow 5.5 S. The FEP film and steel ring have been preinstalled.
  • Made of anodized aluminum and durable design for long term usage.
  • With double silicone covers, keep the resin vat and FEP film away from dust, scratch, UV light source or direct sunlight. Perfect for resin storage.
  • Clear and wear-resistance measurements, easier to use and convenient for printing. Also very easy to replace FEP film.
  • Perfect spare resin vat when you need to change resin color faster and have a better printing experience.
Latest Piezo 3d printer
3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board
  • It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing.
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing.
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet.
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard.
  • Used with other motherboards: The material detection module uses the level transition detection method. When with material in, the detection level signal should be high, and when no material, the material port level signal goes low. When the system detects a determined transition from high to low level, it will regard it as the material exhausted, then the board executes the pause command operation, and after the replacement of the material, it will continue to print.
Latest Piezo 3d printer
Cloud Sensor 3D Printer Kit: Cnc Shield V3 Expansion Board and 4Pcs A4988 and Uno R3
  • uno r3 arduino compatible board:atmega328-au single-chip installed uno bootloader.usb programming is provided by ch340g.usb-b includes connectors and cables.including the title pin.input voltage:7-15v.0-5v output,3.3v compatible input.14 digital i/o pin (6 pwm outputs).6 analog input.
  • isp title.32k flash memory 16mhz clock speed.all smd structure.r3 shield compatible.input voltage:no external power supply connected to the computer usb,external power supply 5v ~ 9v dc.
  • output voltage:5v dc voltage output and 3.3v dc voltage output.use the atmel atmega328 microprocessor controller.
  • cnc shield v3:this expansion board as a drive expansion board,can be used for engraving machine,3d printer.it has four slots,which can drive four a4988 stepper motors.
  • each stepping motor requires only two io ports.in other words,six io ??ports can well manage three stepper motors.use very convenient.warranty:1 * cnc shield v3.4 * a4988 step drive with radiator.1 * uno r3 mega328p ch340g.
Latest Piezo 3d printer
Monoprice Maker Select 3D Printer v2 With Large Heated (200 x 200 x180 mm) Build Plate + Free Sample PLA Filament And MicroSD Card Preloaded With Printable 3D Models.
  • Includes Heated Build Plate, 2 Gb Micro Sd Card and Sample PLA Filament. Includes 3D Printer Accessory Kit - Print Removal Spatula, Allen Wrench Set, Spare PTFE Heatliner, Zipties, Filament Pusher, Nozzle Drill. Compatible softwares: Such as Cure, Repeater, or Simplify 3D. The Maker Select is compatible with Windows, Mac OS X, and Linux.
  • Large volume: The large 8 x 8 inches build plate and generous 7 inches vertical spacing means that you can print larger, more complex models
  • Heated build plate: The heated build plate allows you to print slower cooling materials, such as ABS and modified ABS, as well as PLA and PLA blends
  • Micro SD card slot: Use a micro SD card to store sliced G Code files, then plug the card into the micro SD card slot to print without the need to connect to a Windows or Mac PC
  • Designed exclusively with a UK Type G Power Plug, no additional adapter necessary to plug in the printer in the UK. If you are located in Europe, there is a Type F Power Plug printer available specifically designed for European countries

Buy Piezo 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Piezo 3d printer, buy Piezo 3d printer directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Piezo 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


Best
Best
ELEGOO Mars 2 Pro Mono MSLA 3D Printer UV Photocuring LCD Resin 3D Printer with 6 inch 2K Monochrome LCD, Printing Size 129 * 80 * 160mm/5.08 * 3.15 * 6.30inch
  • 【Fast Printing and less maintenance】Mars 2 Pro comes with a 6.08 inch monochrome LCD of 2K HD resolution and only takes 2 seconds per layer exposure to cure resin, which could significantly enhance your printing efficiency. Mono LCD has a much longer lifespan and stable performance during long term printing, thus saves your cost.
  • 【Outstanding prints and ultra accurcy】Brand new light source structure provides more even UV light emission and working together with 2K mono LCD, the printing details and precision are greatly improved and the 3D printed models are fascinating.
  • 【Sturdy build quality】CNC machined aluminum body makes Mars 2 Pro a very formidable machine. Newly-designed sandblasted build plate has a much stronger adherence during printing and enables consistent printing success. Built-in active carbon could absorb the fume of resin and offer you a refreshing printing experience.
  • 【Multi language interface】Mars 2 Pro now supports 12 kinds of languages so customers across the world could operate the 3D printer more conveniently without barries.The newly added 10 languages are Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish and Portuguese.
  • 【Warranty and Service】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded). However, Mars 2 Pro comes with 2 extra FEP films for you to replace the original one.
Best
ANYCUBIC 3D Printer Mega S All Metal Frame and Updated Extruder, FDM DIY Printer Works, Free Test Filament with TPU/PLA/ABS Printing Size 210x210x205mm
  • Qucik Assembly: 3 steps to set up/assembled the printer with fix 8 screws within minutes not only to an expert user but also to beginner
  • Powerful Extruder: Anycubic mega s updated extruder greatly reduces the risk of clogged nozzle and bad extrusion to provide a better printing experience of flexible
  • Filament Sensor: Automatic printing pause when filament runs out, resume after filament re-load with just one click
  • Ultrabase Platform: 3D printer platform is covered a layer of patented microporous to provide excellent adhesion. And easy to take off the model from the platform after it cool down
  • Suspended Filament Rack: 3D fdm printer One-piece hanging design makes the feeding of filament more smoother, save space and more convenient
Best
ELEGOO Mars 2 Mono MSLA 3D Printer UV Photocuring LCD Resin 3D Printer with 6.08 inch 2K Monochrome LCD, Printing Size 129 * 80 * 150mm / 5.08 * 3.15 * 5.90 inch
  • 【Fast Printing and less maintenance】Mars 2 comes with a 6.08 inch monochrome LCD of 2K HD resolution and only takes 2 seconds per layer exposure to cure resin, which could significantly enhance your printing efficiency. Mono LCD has a much longer lifespan and stable performance during long term printing, thus saves your cost.
  • 【Outstanding prints and ultra accurcy】Brand new light source structure provides more even UV light emission and working together with 2K mono LCD, the printing details and precision are greatly improved and the 3D printed models are fascinating.
  • 【Sturdy build quality】CNC machined aluminum body makes Mars 2 a very formidable machine. Newly-designed sandblasted build plate has a much stronger adherence during printing and enables consistent printing success. Built-in active carbon could absorb the fume of resin and offer you a refreshing printing experience.
  • 【Multi language interface】Mars 2 now supports 12 kinds of languages so customers across the world could operate the 3D printer more conveniently without barries.The newly added 10 languages are Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish and Portuguese.
  • 【Warranty and Service】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded).
Best
ELEGOO Mars Pro 3D Printer, MSLA UV Photocuring LCD Resin Printer with Activated Carbon Front USB Port 3.5in Touch Screen, Matrix UV LED Light Source 115x65x150mm Printing Size
  • 【What's PRO than Mars? 】BGW15CA Linear guideway with accuracy of 0.02mm, smoother, quieter and more stable. 50w Matrix LED UV light source offer more uniform light emission, curing time lower to 6s per layer. Built-in Activated Carbon Filter, additional cover rubber sealing, no need to worry about the odor of resin
  • 【Convenient and Easy to Use】The build plate has changed to CNC turning CD pattern, which provides stronger adhesion when printing. The improved translucent resin vat is lighter. The USB port has changed to front from back, it is more convenient to plug the flash drive. Mars Pro also refactored user interface with dark background and simulant icons
  • 【Add Air Filter System】Mars Pro add a rubber sealing to the upper cover to prevent the resin odor from out of the cover. The built-in activated carbon filter can absorb and eliminate odor, so there is no need to worry about resin odor during printing
  • 【Better Printing Quality】Thanks to the upgraded Matrix 28 50W UV LED light source,the uniformity of light is increased to 95%. It means more accurate print size, layer exposure time is also reduced to 6 seconds. Mars 2 support .ctb format, smaller files but greatly increase the success rate of printing of bigger models
  • 【MSLA Technology】Digital mask controls which regions of the print area are illuminated by a panel light source array. This allows every object on the built plate to be photocured simultaneously. It means an ELEGOO Mars Pro printer can print 2 and more models as quickly as one. Mars Pro MSLA printer are much faster than SLA or DLP printers

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Piezo 3d printer

Here is the ranking of the best Piezo 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Piezo 3d printer and read the reviews left by real customers, see the Piezo 3d printer ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Piezo 3d printer New
Asixxsix Power outlet kit for 3D printer, switch socket, universal commercial home printer for 3D printer
  • U-type plug for easy installation.
  • Universal power switch socket module for 3D printer (NO limitation to models).
  • Comes with a fuse.
  • The lines have been pressed molding with insulated housing.
  • Adopting high quality green environmentally friendly material.
DISCOUNTPiezo 3d printer New
3D Printer Thermistor Temp Sensor 100K 120CM Cable for Creality Ender 3 Ender 3 Pro CR-10S Anet a8 Accessory Eewolf
  • Connector: XH2.54 2Pin
  • Wire length: 1.2m/47.24 inches to meet more customers' need
  • Use for heated bed or extruder of 3D Printer
  • Package include: 5 thermistors
  • Temperature sensor 100KΩ accuracy of ± 1%
Piezo 3d printer New
Creality CR-6 SE Filament Sensor Kit
  • Compatible: suitable for testing 1.75 mm filament, adding wear-resistant copper sleeve, can effectively extend the life of the product. Independent modularised design compatible with multiple Creality printers.
  • Smooth filament transportation: the filament sensor has a built-in filament guide, which is made of metal material with smooth surface, which reduces friction resistance and ensures smooth filament feed.
  • Filament sensor kit with simple structure and easy installation.
  • The blue LED indicates the normal filament feed, the blue LED turns off when the filament runs out.
  • It has been redesigned with a new inner structure. The outer cover is frosted, making it stylish and unique.
Piezo 3d printer New
3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board
  • It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing.
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing.
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet.
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard.
  • Used with other motherboards: The material detection module uses the level transition detection method. When with material in, the detection level signal should be high, and when no material, the material port level signal goes low. When the system detects a determined transition from high to low level, it will regard it as the material exhausted, then the board executes the pause command operation, and after the replacement of the material, it will continue to print.
Piezo 3d printer New
BIGTREETECH Spring Steel Build Plate for SLA/DLP 3D printer 135X75MM Flexible Build System for Resin with Magnetic Sticker for Elegoo Mars/Mars Pro, Wanhao D7, Phrozen sonic mini 4k
  • 1) 【Fits Resin Printer】 Elegoo Mars/Mars Pro, Wanhao D7, Phrozen Sonic Mini 4K, MONOPRICE Mini Deluxe SLA.
  • 2) 【Stronger adsorption】 the special wire drawing treatment on the surface of the spring steel plate makes the model better absorb. Spring Steel, easy to Use and flexible, which has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
  • 3) 【Flat, Sturdy and Durable】 The steel plate is made of spring steel imported from the United States, which has good flatness and durability; the soft magnetic sheet is a strong magnetic soft magnetic sheet with strong magnetic force.
  • 4) 【Easily remove the model】 After using the spring steel plate, the model can be removed with a light flick. The traditional DLP printer platform requires the help of tools such as a spatula to take off the model.
  • 5) 【Easy to remove the steel plate】 Ergonomic handle design makes it easier to remove the steel plate from the platform.
Piezo 3d printer New
Anti‑vibration Printer Hot Bed PCB Mini Heatbed Silicone Column Hot Bed Parts Dual Heating Plate Mini Hot Bed Board for OpenBuilds 3D Printer with Power Cord
  • This silica gel column kit is anti‑vibration, anti‑shake, anti‑hot bed friction, and has a strong adsorption force.
  • The mini hot bed board and silica gel column kit are suitable for 3D printers and are indispensable parts of the printer.
  • The thermal bed board and silicone column kit of this printer are stable and durable.
  • The silicone column kit is easy to replace, resistant to high temperatures, has good electrical insulation properties and surface resistivity.
  • The mini hot bed board can be connected to 12v/24v power supply, which is safe and reliable, and you can use it with confidence.
DISCOUNTPiezo 3d printer New
Iverntech 2 Pack Upgraded Dual Drive BMG Extruder for CR10,Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer
  • Dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385
  • Adjustable Tension: The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament
  • Suitable for most 3D printers and filaments
  • Warranty: free return/ exchange in 90 days
  • Packing with: 2x Bowden BMG Extruder, 2 x Universal Stepper Motor Bracket
Piezo 3d printer New
TOPQSC 3D Printer 100 x 100 x 100mm Mini Printing Size with 10 M 1.75mm PLA Filament-White Color, Magnetic Removable Plate DIY Projects Starter Kit for Kids School
  • 【Vivid printing quality】With a clean and elegant design, 3D printer has a printing volume of 100x100x100 mm and an accuracy of 0.05mm. The 0.4mm professional aluminum nozzles with high precision. No worry about clogging.The printing quality is smooth and alive. ABS shell makes it ultra-lightweight, small and easy to carry.As a starter kit, you can use it for DIY projects like toys, artworks, crafts or samples.
  • 【Quick assembly】 This 3D printer kit contains 3 main parts. According to the assembly video on our page, it only takes 3 minutes to complete the assembly. Note: If the shaft of the printer cannot be moved, please check whether the connecting cable is loose. Suitable for beginners and experienced people.
  • 【Ultra-Silent Printing:】 With a silent working mode under 60db, it never makes you feel irritable when you sleep or rest, even it is printing. The provided PLA filament is a safety material for children to use. Widely used in toys, anime surrounds, artworks, furniture, daily necessities, and other fields.
  • 【Applicable people】This 3D printer is suitable for children, teachers, offices, dormitories, classrooms, families, etc. It can also be used as an exquisite gift for family and friends. Mini portable, beautifully packaged, easy to carry.
  • 【Quality Assurance】This 3D printer has passed various certifications and quality assurance. If you have any questions, please feel free to contact us, we will be at your service 24 hours a day.
Piezo 3d printer New
Anycubic UV Photocuring Resin 3D Printer, Metal Frame 2K Monochrome LCD Screen Fast Printing Supporting Remote Control APP Z-axis Dual Linear Rail Printing UV Cooling System(Photon Mono SE)
  • 【Fast Printing Speed: 】The exposure time is reduced to 1 second.Supports up to 80 mm/h printing speed. The printing speed is 4 times faster than the speed of an RGB screen. The new matrix parallel light source enables a more uniform exposure and makes the printing faster and more precise.
  • 【Supporting Remote Control:】 Anycubic remote control APP. You can remote control the printing operation even if you are not near the machine. Monitor the printing progress and adjust the printing settings.
  • 【High Performance Z-axis Motion System: 】The Z-axis is supported by dual linear rails, stepper motor and clearance nut combination, which dramatically improves stability while in motion and reduces the risk of shifted layering.
  • 【 Easy Bed Leveling& UV Cooling System:】 Easy leveling with a few simple steps: Click "Home" icon and tighten the screw. The UV cooling system enables high efficient heat dissipation, thus make the printing more stable and prolong the service life of the machine.
  • 【Warranty and Service】ANYCUBIC provides Lifetime technical support and a one-year warranty (Except E2K LCD Screen and FEP film).Any questions about product operation or software,please feel free to contact us.

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Piezo 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Piezo 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

Anycubic UV Photocuring Resin 3D Printer, Metal Frame 2K Monochrome LCD Screen Fast Printing Supporting Remote Control APP Z-axis Dual Linear Rail Printing UV Cooling System(Photon Mono SE)
  • 【Fast Printing Speed: 】The exposure time is reduced to 1 second.Supports up to 80 mm/h printing speed. The printing speed is 4 times faster than the speed of an RGB screen. The new matrix parallel light source enables a more uniform exposure and makes the printing faster and more precise.
  • 【Supporting Remote Control:】 Anycubic remote control APP. You can remote control the printing operation even if you are not near the machine. Monitor the printing progress and adjust the printing settings.
  • 【High Performance Z-axis Motion System: 】The Z-axis is supported by dual linear rails, stepper motor and clearance nut combination, which dramatically improves stability while in motion and reduces the risk of shifted layering.
  • 【 Easy Bed Leveling& UV Cooling System:】 Easy leveling with a few simple steps: Click "Home" icon and tighten the screw. The UV cooling system enables high efficient heat dissipation, thus make the printing more stable and prolong the service life of the machine.
  • 【Warranty and Service】ANYCUBIC provides Lifetime technical support and a one-year warranty (Except E2K LCD Screen and FEP film).Any questions about product operation or software,please feel free to contact us.
3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board
  • It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing.
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing.
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet.
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard.
  • Used with other motherboards: The material detection module uses the level transition detection method. When with material in, the detection level signal should be high, and when no material, the material port level signal goes low. When the system detects a determined transition from high to low level, it will regard it as the material exhausted, then the board executes the pause command operation, and after the replacement of the material, it will continue to print.
DISCOUNT
Iverntech 2 Pack Upgraded Dual Drive BMG Extruder for CR10,Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer
  • Dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385
  • Adjustable Tension: The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament
  • Suitable for most 3D printers and filaments
  • Warranty: free return/ exchange in 90 days
  • Packing with: 2x Bowden BMG Extruder, 2 x Universal Stepper Motor Bracket
Asixxsix Power outlet kit for 3D printer, switch socket, universal commercial home printer for 3D printer
  • U-type plug for easy installation.
  • Universal power switch socket module for 3D printer (NO limitation to models).
  • Comes with a fuse.
  • The lines have been pressed molding with insulated housing.
  • Adopting high quality green environmentally friendly material.
Creality CR-6 SE Filament Sensor Kit
  • Compatible: suitable for testing 1.75 mm filament, adding wear-resistant copper sleeve, can effectively extend the life of the product. Independent modularised design compatible with multiple Creality printers.
  • Smooth filament transportation: the filament sensor has a built-in filament guide, which is made of metal material with smooth surface, which reduces friction resistance and ensures smooth filament feed.
  • Filament sensor kit with simple structure and easy installation.
  • The blue LED indicates the normal filament feed, the blue LED turns off when the filament runs out.
  • It has been redesigned with a new inner structure. The outer cover is frosted, making it stylish and unique.

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Piezo 3d printer actually costs.

Latest Piezo 3d printer
AMONIDA 【𝐄𝐚𝐬𝐭𝐞𝐫】 Extruder, Extruder Hot End Set, Precise Firm Compact Aluminum Alloy Offices Printers for Home Use 3D Printers
  • The extruder kit is compact and exquisite, easy to install, stable and firm, and the quality is guaranteed.
  • This extruder kit is suitable for various printers and is an indispensable part.
  • The extruder hot end kit is widely used in the field of 3D printers and is an indispensable accessory for printers.
  • This 3D printer's extruder hot‑end kit has a strong heat dissipation function and precise printing.
  • Extruder's excellent thermal insulation performance increases structural rigidity.
DISCOUNTLatest Piezo 3d printer
SIQUK 3 Pieces Teflon Tube PTFE Blue Tubing(1.5 Meters) with 3 Pieces PC4-M6 Fittings and 3 Pieces PC4-M10 Male Straight Pneumatic PEFE Tube Push Fitting Connector for 3D Printer 1.75mm Filament
  • PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm
  • Premium material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper; PC4-M10 Fittings is made of stainless steel
  • Attention - small 3D printer accessories, please keep away from children
Latest Piezo 3d printer
Latest Piezo 3d printer
5pcs NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for RepRap 3D Printer Heatbed or Hot End
  • Pack of 5PCS
  • Temperature sensor 100KΩ accuracy of ± 1%
  • Wiring length: 1 meter
  • Use it with heated bed or extruder
  • Conviniently pre-wired with 1 meter long high temperature PTFE insulated wiring
Latest Piezo 3d printer
YOTINO 2 Pcs PTFE Teflon Tube (1 Meter) with 4 Pcs PC4-M10 Straight Pneumatic Quick Fitting Push to Connect for 3D Printer 1.75mm Filament (2.0mm ID/4.0mm OD)
  • [Teflon Tube] Outside diameter 4mm, inside diameter 2mm; density 2.15-2.20g/cm3; it made of premium PTFE (Poly Tetra Fluoro Ethylene) material, safety and non-toxic, heat resistant up to 260℃
  • [PC4-M10 fittings] Thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of stainless steel and plastic, high hardness, antioxidtion, anti corrosion.
  • [Strong Compatibility] This PTFE tube compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8
  • [Easy to Install] These 3D printer accessories are able to bear stronger impulse but won't tripping, Connecting by the outer thread of the quick fitting, easy to install.
  • [Package include] 2x 1M PTFE Teflon Bowden Tube(2.0mm ID/4.0mm OD) + 4x PC4-M10 Fittings
Latest Piezo 3d printer
Sovol 3D Printer Resin Vat 2 Pack Anodized Aluminium with FEP Film and Steel Ring Preinstalled, Durable Metal Frame Resin Tank with Double Silicone Covers for ELEGOO Mars ANYCUBIC Photon 3D Printer
  • Sovol 3D resin vat fits for ELEGOO Mars/Mars C/Mars Pro/Mars 2 Pro, Anycubic Photon/Photon S/Photon Mono/Photon Mono Se, QIDI TECH Shadow 5.5 S. The FEP film and steel ring have been preinstalled.
  • Made of anodized aluminum and durable design for long term usage.
  • With double silicone covers, keep the resin vat and FEP film away from dust, scratch, UV light source or direct sunlight. Perfect for resin storage.
  • Clear and wear-resistance measurements, easier to use and convenient for printing. Also very easy to replace FEP film.
  • Perfect spare resin vat when you need to change resin color faster and have a better printing experience.
Latest Piezo 3d printer
3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board
  • It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing.
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing.
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet.
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard.
  • Used with other motherboards: The material detection module uses the level transition detection method. When with material in, the detection level signal should be high, and when no material, the material port level signal goes low. When the system detects a determined transition from high to low level, it will regard it as the material exhausted, then the board executes the pause command operation, and after the replacement of the material, it will continue to print.
Latest Piezo 3d printer
Cloud Sensor 3D Printer Kit: Cnc Shield V3 Expansion Board and 4Pcs A4988 and Uno R3
  • uno r3 arduino compatible board:atmega328-au single-chip installed uno bootloader.usb programming is provided by ch340g.usb-b includes connectors and cables.including the title pin.input voltage:7-15v.0-5v output,3.3v compatible input.14 digital i/o pin (6 pwm outputs).6 analog input.
  • isp title.32k flash memory 16mhz clock speed.all smd structure.r3 shield compatible.input voltage:no external power supply connected to the computer usb,external power supply 5v ~ 9v dc.
  • output voltage:5v dc voltage output and 3.3v dc voltage output.use the atmel atmega328 microprocessor controller.
  • cnc shield v3:this expansion board as a drive expansion board,can be used for engraving machine,3d printer.it has four slots,which can drive four a4988 stepper motors.
  • each stepping motor requires only two io ports.in other words,six io ??ports can well manage three stepper motors.use very convenient.warranty:1 * cnc shield v3.4 * a4988 step drive with radiator.1 * uno r3 mega328p ch340g.
Latest Piezo 3d printer
Monoprice Maker Select 3D Printer v2 With Large Heated (200 x 200 x180 mm) Build Plate + Free Sample PLA Filament And MicroSD Card Preloaded With Printable 3D Models.
  • Includes Heated Build Plate, 2 Gb Micro Sd Card and Sample PLA Filament. Includes 3D Printer Accessory Kit - Print Removal Spatula, Allen Wrench Set, Spare PTFE Heatliner, Zipties, Filament Pusher, Nozzle Drill. Compatible softwares: Such as Cure, Repeater, or Simplify 3D. The Maker Select is compatible with Windows, Mac OS X, and Linux.
  • Large volume: The large 8 x 8 inches build plate and generous 7 inches vertical spacing means that you can print larger, more complex models
  • Heated build plate: The heated build plate allows you to print slower cooling materials, such as ABS and modified ABS, as well as PLA and PLA blends
  • Micro SD card slot: Use a micro SD card to store sliced G Code files, then plug the card into the micro SD card slot to print without the need to connect to a Windows or Mac PC
  • Designed exclusively with a UK Type G Power Plug, no additional adapter necessary to plug in the printer in the UK. If you are located in Europe, there is a Type F Power Plug printer available specifically designed for European countries

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Piezo 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Piezo 3d printer which are among the cheapest on the market. Just scroll through the list to find Piezo 3d printer the cheapest products.

Catalog

The product Piezo 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.

Piezo 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Piezo 3d printer New
Asixxsix Power outlet kit for 3D printer, switch socket, universal commercial home printer for 3D printer
  • U-type plug for easy installation.
  • Universal power switch socket module for 3D printer (NO limitation to models).
  • Comes with a fuse.
  • The lines have been pressed molding with insulated housing.
  • Adopting high quality green environmentally friendly material.
DISCOUNTPiezo 3d printer New
3D Printer Thermistor Temp Sensor 100K 120CM Cable for Creality Ender 3 Ender 3 Pro CR-10S Anet a8 Accessory Eewolf
  • Connector: XH2.54 2Pin
  • Wire length: 1.2m/47.24 inches to meet more customers' need
  • Use for heated bed or extruder of 3D Printer
  • Package include: 5 thermistors
  • Temperature sensor 100KΩ accuracy of ± 1%
Piezo 3d printer New
Creality CR-6 SE Filament Sensor Kit
  • Compatible: suitable for testing 1.75 mm filament, adding wear-resistant copper sleeve, can effectively extend the life of the product. Independent modularised design compatible with multiple Creality printers.
  • Smooth filament transportation: the filament sensor has a built-in filament guide, which is made of metal material with smooth surface, which reduces friction resistance and ensures smooth filament feed.
  • Filament sensor kit with simple structure and easy installation.
  • The blue LED indicates the normal filament feed, the blue LED turns off when the filament runs out.
  • It has been redesigned with a new inner structure. The outer cover is frosted, making it stylish and unique.
Piezo 3d printer New
3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board
  • It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing.
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing.
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet.
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard.
  • Used with other motherboards: The material detection module uses the level transition detection method. When with material in, the detection level signal should be high, and when no material, the material port level signal goes low. When the system detects a determined transition from high to low level, it will regard it as the material exhausted, then the board executes the pause command operation, and after the replacement of the material, it will continue to print.
Piezo 3d printer New
BIGTREETECH Spring Steel Build Plate for SLA/DLP 3D printer 135X75MM Flexible Build System for Resin with Magnetic Sticker for Elegoo Mars/Mars Pro, Wanhao D7, Phrozen sonic mini 4k
  • 1) 【Fits Resin Printer】 Elegoo Mars/Mars Pro, Wanhao D7, Phrozen Sonic Mini 4K, MONOPRICE Mini Deluxe SLA.
  • 2) 【Stronger adsorption】 the special wire drawing treatment on the surface of the spring steel plate makes the model better absorb. Spring Steel, easy to Use and flexible, which has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
  • 3) 【Flat, Sturdy and Durable】 The steel plate is made of spring steel imported from the United States, which has good flatness and durability; the soft magnetic sheet is a strong magnetic soft magnetic sheet with strong magnetic force.
  • 4) 【Easily remove the model】 After using the spring steel plate, the model can be removed with a light flick. The traditional DLP printer platform requires the help of tools such as a spatula to take off the model.
  • 5) 【Easy to remove the steel plate】 Ergonomic handle design makes it easier to remove the steel plate from the platform.
Piezo 3d printer New
Anti‑vibration Printer Hot Bed PCB Mini Heatbed Silicone Column Hot Bed Parts Dual Heating Plate Mini Hot Bed Board for OpenBuilds 3D Printer with Power Cord
  • This silica gel column kit is anti‑vibration, anti‑shake, anti‑hot bed friction, and has a strong adsorption force.
  • The mini hot bed board and silica gel column kit are suitable for 3D printers and are indispensable parts of the printer.
  • The thermal bed board and silicone column kit of this printer are stable and durable.
  • The silicone column kit is easy to replace, resistant to high temperatures, has good electrical insulation properties and surface resistivity.
  • The mini hot bed board can be connected to 12v/24v power supply, which is safe and reliable, and you can use it with confidence.
DISCOUNTPiezo 3d printer New
Iverntech 2 Pack Upgraded Dual Drive BMG Extruder for CR10,Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer
  • Dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385
  • Adjustable Tension: The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament
  • Suitable for most 3D printers and filaments
  • Warranty: free return/ exchange in 90 days
  • Packing with: 2x Bowden BMG Extruder, 2 x Universal Stepper Motor Bracket
Piezo 3d printer New
TOPQSC 3D Printer 100 x 100 x 100mm Mini Printing Size with 10 M 1.75mm PLA Filament-White Color, Magnetic Removable Plate DIY Projects Starter Kit for Kids School
  • 【Vivid printing quality】With a clean and elegant design, 3D printer has a printing volume of 100x100x100 mm and an accuracy of 0.05mm. The 0.4mm professional aluminum nozzles with high precision. No worry about clogging.The printing quality is smooth and alive. ABS shell makes it ultra-lightweight, small and easy to carry.As a starter kit, you can use it for DIY projects like toys, artworks, crafts or samples.
  • 【Quick assembly】 This 3D printer kit contains 3 main parts. According to the assembly video on our page, it only takes 3 minutes to complete the assembly. Note: If the shaft of the printer cannot be moved, please check whether the connecting cable is loose. Suitable for beginners and experienced people.
  • 【Ultra-Silent Printing:】 With a silent working mode under 60db, it never makes you feel irritable when you sleep or rest, even it is printing. The provided PLA filament is a safety material for children to use. Widely used in toys, anime surrounds, artworks, furniture, daily necessities, and other fields.
  • 【Applicable people】This 3D printer is suitable for children, teachers, offices, dormitories, classrooms, families, etc. It can also be used as an exquisite gift for family and friends. Mini portable, beautifully packaged, easy to carry.
  • 【Quality Assurance】This 3D printer has passed various certifications and quality assurance. If you have any questions, please feel free to contact us, we will be at your service 24 hours a day.
Piezo 3d printer New
Anycubic UV Photocuring Resin 3D Printer, Metal Frame 2K Monochrome LCD Screen Fast Printing Supporting Remote Control APP Z-axis Dual Linear Rail Printing UV Cooling System(Photon Mono SE)
  • 【Fast Printing Speed: 】The exposure time is reduced to 1 second.Supports up to 80 mm/h printing speed. The printing speed is 4 times faster than the speed of an RGB screen. The new matrix parallel light source enables a more uniform exposure and makes the printing faster and more precise.
  • 【Supporting Remote Control:】 Anycubic remote control APP. You can remote control the printing operation even if you are not near the machine. Monitor the printing progress and adjust the printing settings.
  • 【High Performance Z-axis Motion System: 】The Z-axis is supported by dual linear rails, stepper motor and clearance nut combination, which dramatically improves stability while in motion and reduces the risk of shifted layering.
  • 【 Easy Bed Leveling& UV Cooling System:】 Easy leveling with a few simple steps: Click "Home" icon and tighten the screw. The UV cooling system enables high efficient heat dissipation, thus make the printing more stable and prolong the service life of the machine.
  • 【Warranty and Service】ANYCUBIC provides Lifetime technical support and a one-year warranty (Except E2K LCD Screen and FEP film).Any questions about product operation or software,please feel free to contact us.

Where to buy?

If you are asking yourself where to buy Piezo 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Piezo 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Piezo 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Piezo 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Piezo 3d printer used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Piezo 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

Anycubic UV Photocuring Resin 3D Printer, Metal Frame 2K Monochrome LCD Screen Fast Printing Supporting Remote Control APP Z-axis Dual Linear Rail Printing UV Cooling System(Photon Mono SE)
  • 【Fast Printing Speed: 】The exposure time is reduced to 1 second.Supports up to 80 mm/h printing speed. The printing speed is 4 times faster than the speed of an RGB screen. The new matrix parallel light source enables a more uniform exposure and makes the printing faster and more precise.
  • 【Supporting Remote Control:】 Anycubic remote control APP. You can remote control the printing operation even if you are not near the machine. Monitor the printing progress and adjust the printing settings.
  • 【High Performance Z-axis Motion System: 】The Z-axis is supported by dual linear rails, stepper motor and clearance nut combination, which dramatically improves stability while in motion and reduces the risk of shifted layering.
  • 【 Easy Bed Leveling& UV Cooling System:】 Easy leveling with a few simple steps: Click "Home" icon and tighten the screw. The UV cooling system enables high efficient heat dissipation, thus make the printing more stable and prolong the service life of the machine.
  • 【Warranty and Service】ANYCUBIC provides Lifetime technical support and a one-year warranty (Except E2K LCD Screen and FEP film).Any questions about product operation or software,please feel free to contact us.
3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board
  • It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing.
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing.
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet.
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard.
  • Used with other motherboards: The material detection module uses the level transition detection method. When with material in, the detection level signal should be high, and when no material, the material port level signal goes low. When the system detects a determined transition from high to low level, it will regard it as the material exhausted, then the board executes the pause command operation, and after the replacement of the material, it will continue to print.
DISCOUNT
Iverntech 2 Pack Upgraded Dual Drive BMG Extruder for CR10,Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer
  • Dual-drive BMG Bowden extruder has an internal transmission ratio of 3: 1 and high accuracy, and we recommend E-steps:385
  • Adjustable Tension: The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament
  • Suitable for most 3D printers and filaments
  • Warranty: free return/ exchange in 90 days
  • Packing with: 2x Bowden BMG Extruder, 2 x Universal Stepper Motor Bracket
Asixxsix Power outlet kit for 3D printer, switch socket, universal commercial home printer for 3D printer
  • U-type plug for easy installation.
  • Universal power switch socket module for 3D printer (NO limitation to models).
  • Comes with a fuse.
  • The lines have been pressed molding with insulated housing.
  • Adopting high quality green environmentally friendly material.
Creality CR-6 SE Filament Sensor Kit
  • Compatible: suitable for testing 1.75 mm filament, adding wear-resistant copper sleeve, can effectively extend the life of the product. Independent modularised design compatible with multiple Creality printers.
  • Smooth filament transportation: the filament sensor has a built-in filament guide, which is made of metal material with smooth surface, which reduces friction resistance and ensures smooth filament feed.
  • Filament sensor kit with simple structure and easy installation.
  • The blue LED indicates the normal filament feed, the blue LED turns off when the filament runs out.
  • It has been redesigned with a new inner structure. The outer cover is frosted, making it stylish and unique.

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Piezo 3d printer.

Rating: 3.19 of 5 - 21 votes
1 Star2 Stars3 Stars4 Stars5 Stars (21 votes, average: 3.19 out of 5)
Loading...