Pei sheet for 3d printer Reviews and Best Deals

Don't miss out on the promotions for Pei sheet for 3d printer, buy Pei sheet for 3d printer directly online and enjoy big saving on your purchases.

DISCOUNTLatest Pei sheet for 3d printer
Creality 3D PEI Magnetic Flexible Heated Bed 235 * 235mm Spring Steel Build Surface for Ender-3/pro/Ender-5
  • Creality flexible and removable PEI magnetic bed can stick to magnetics very well. This spring steel sheet has high strength and heat resistance. Suitable for pla, abs, peek and any other filaments.
  • Filaments stick easily onto the surface of this build surface, easy to take off prints from upgraded magnetic flexible build surface and easy to clean up it.
  • The PEI build surface has a smooth surface. The first layer will smooth like the glass bed.
  • Just let everything cool down remove the steel plate and gently flex/ bend/ twist and off it pops.
  • Size: 235 * 235 mm, works for ender3/ ender 3 pro/ ender 5 or any other printers with same printing size.
Latest Pei sheet for 3d printer
PEI Sheet 3D Printer Build Surface 220mm * 220mm * 0.2mm for PLA/ABS/HIPS
  • PEI (polyetherimide) sheets provide a 3D printed build surface that does not require tape, paste or adhesive.
  • Both ABS and PLA adhere well to the surface, eliminating the need for support rafts for better adhesion.
  • The stable use temperature is 190 degrees.
  • It helps to wipe the surface between the prints with isopropyl alcohol, methanol or soap, which will ensure that the PEI is clean and helps to bond.
  • Mild sanding with 5000 grit will also give PEI sheets a longer life.
Latest Pei sheet for 3d printer
SOOWAY PEI Sheet 0.3mm Thick 3D Printer Hot Bed Sticker Build Surface with 3M 468MP Adhesive Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8 (220 * 220mm)
  • This PEI sheet is Pre-applied with 3M 468MP Adhesive Transfer Tape for your convenience.
  • ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
  • REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling.
  • Sheet can be easily cut down to desired size by scoring with a utility knife.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results.
Latest Pei sheet for 3d printer
HAWKUNG PEI Sheet 11.8" x 11.8"(300x300mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive Build Platform Hot Bed Sticker Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8
  • This kind of PEI sheet is 3M 468MP tape pre-applied, which means you have no need to apply the 3M tape on the sheet anymore, and no slurry, or adhesive.It is especially convenient to use.
  • ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down.
  • Compared with other ordinary hot bed stickers, PEI sheet hot bed stickers are more resistant to high temperatures, more durable, and are not easily scratched.The bottom of the model printed on the PEI sheet is smoother and the model is easier to take out.
  • Easily clear the PEI sheet surface with a quick wide done with isopropyl alcohol, methyl alcohol, or soap for next use.Optionally, light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life.
  • Suitable material: ABS, PLA, PVC, NYLON, PCL, TPU, TPE, etc.
Latest Pei sheet for 3d printer
Domeilleur Spring Steel Sheet Heat Bed Platform Printing Buildplate+ PEI Sheet for 3D Printer Prusa i3 Mk3
  • Flexible metal Sheet Spring sheet plate cut for Prusa i3 Mk3 Mk2.5 !
  • Notched For Prusa MK3 Or Mk2.5 , fit only With new magnetic MK52 heatbed.
  • It includes 1pc spring steel sheet +1pc PEI Sheet
  • Fit for Prusa i3 Mk3 Mk2.5Model Number: Item Type:--Heatbed
  • Included:
DISCOUNTLatest Pei sheet for 3d printer
ERYONE Maflex Upgrade Magnetic Flexible 3D Printing Build Surface with Sticker for 3D Printer 235 * 235mm
  • 1.Compatible with heated beds of all FDM 3D printers.
  • 2.Filaments stick easily onto the surface of this build surface, easy to take off prints from upgraded magnetic flexible build surface and easy to clean up it.
  • 3.High quality stainless steel - ensure flexible, easy to take off and clean up; High quality magnetic material - ensure the build surface compatible with all FDM 3D printers heated beds.
  • 4.Magnetic material with pre-packed 3M adhesive, so it’s easy to get your bed perfectly flat before installing the upgrade magnetic flexible build surface.
  • 5.Choose the correct size for your printer: 310x310x2MM, 235x235x2MM, 220x220x2MM, 165x165x2MM available.
Latest Pei sheet for 3d printer
BIQU SSS Super Spring Steel Sheet Heatbed Platform 310310 MM PEI 3D Printer Parts Printing Build Plate PLA PETG for CR10 CR10S Pro
  • 【Strong Adhesion】After the hot bed is heated, the model is stable on the hot bed,and not easy to loose and fall off.
  • 【Easy to Use and Flexible】Has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
  • 【High Wear Resistance】The surface is wear-resistant, and the coating is not easy to fall off and wear.
  • 【High temperature resistance】Withstand temperature above 200 ℃.
  • 【Good compatibility】Can print a variety of consumables, such as PLA, PETG, TPU, ABS, etc.
Latest Pei sheet for 3d printer
UEETEK 3D Printing Build Surface 3D Printer Plate for Heated Bed 300mm x 300mm (Square) - 3 Pieces
  • 3D Printing Build Surface sticks to the 3D printer platforms and improves the molding accuracy of the filament.
  • Build sheet adheres to a print bed to help the filament stick during printing and print without warping.
  • Compatible with ABS, PLA, HIPS, PETG, TPE, nylon, PC and so on. Allow to print surface without additional adhesives or tape.
  • Build sheet adheres to a print bed or heatbed to help the filament stick during printing and easy to clean and remove the printed part after that.
  • Color: Black. Material: Composite material. Size: About 300mm x 300mm/11.8 x 11.8 inch.
DISCOUNTLatest Pei sheet for 3d printer
YOTINO 4Pcs 3D Printing Build Surface 3D Printer Plate for Heated Bed 200x200x3mm
  • [Easy to install and run] The micro textured surface of 3D Printer sticker can instantly locks to your 3D model quickly. Background is made of 3M adhesive, Once installed and calibrated, and won't have to worry about come unstuck.
  • [Eco-friendly and reusable ] 3D printer surface sticker can be reused for many consecutive builds without the need to change the printing surface Build sheet adheres and print without warping.
  • [Compatibility buildtak] 3D Printing Build Surface sticks to the 3D printer platforms. It is manufactured with premium material and compatible with ABS, PLA, HIPS, PETG, TPE, Nylon, PC and so on.
  • [Simply to removal] The sheet can be peeled cleanly from the platform, easy to maintenance and clean up.Prints come out better and the build plate is protected from print residue.
  • [Uniquely textured sheets] 3d printer bed build surface, replaces the blue masking tape or polyimide films such as Kapton Tape.It is made from heat-resistant materials to provide a stable build platform for 3D printed models whilst Improve the printing effect.

On this page you will find the list of the best Pei sheet for 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Pei sheet for 3d printer | Overview


DISCOUNTBest
PEI Sheet 3D-Printer Build Surface Polyetherimide Ultem for PLA ABS HIPS 300x300 0.5mm
  • Billed as the ultimate build surface for your 3D printer, Polyetherimide (PEI) is a virtually maintenance free platform on which to turn your designs into reality.
  • The PEI sheet is suited to use with ABS (heated bed,) PLA (heated or non-heated,) PVA or HIPS and requires no support rafts as parts adhere directly to the surface without a problem.
  • It is an amorphous high-performance polymer with high mechanical efficiency and excellent thermal resistance, chemical stability, high dimensional stability and creep strength.
  • PEI doesn’t require any prepping before each print apart from an occasional wipe with some 75~90% isopropyl alcohol to remove finger prints.
  • The sheet is self-adhesive for convenience and is easily cut to size by scoring with a sharp then bending.
DISCOUNTBest
Creality 3D PEI Magnetic Flexible Heated Bed 235 * 235mm Spring Steel Build Surface for Ender-3/pro/Ender-5
  • Creality flexible and removable PEI magnetic bed can stick to magnetics very well. This spring steel sheet has high strength and heat resistance. Suitable for pla, abs, peek and any other filaments.
  • Filaments stick easily onto the surface of this build surface, easy to take off prints from upgraded magnetic flexible build surface and easy to clean up it.
  • The PEI build surface has a smooth surface. The first layer will smooth like the glass bed.
  • Just let everything cool down remove the steel plate and gently flex/ bend/ twist and off it pops.
  • Size: 235 * 235 mm, works for ender3/ ender 3 pro/ ender 5 or any other printers with same printing size.
Best
HAWKUNG PEI Sheet 11.8" x 11.8"(300x300mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive Build Platform Hot Bed Sticker Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8
  • This kind of PEI sheet is 3M 468MP tape pre-applied, which means you have no need to apply the 3M tape on the sheet anymore, and no slurry, or adhesive.It is especially convenient to use.
  • ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down.
  • Compared with other ordinary hot bed stickers, PEI sheet hot bed stickers are more resistant to high temperatures, more durable, and are not easily scratched.The bottom of the model printed on the PEI sheet is smoother and the model is easier to take out.
  • Easily clear the PEI sheet surface with a quick wide done with isopropyl alcohol, methyl alcohol, or soap for next use.Optionally, light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life.
  • Suitable material: ABS, PLA, PVC, NYLON, PCL, TPU, TPE, etc.
Best
SOOWAY PEI Sheet 0.3mm Thick 3D Printer Hot Bed Sticker Build Surface with 3M 468MP Adhesive Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8 (220 * 220mm)
  • This PEI sheet is Pre-applied with 3M 468MP Adhesive Transfer Tape for your convenience.
  • ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
  • REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling.
  • Sheet can be easily cut down to desired size by scoring with a utility knife.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results.
Best
UEETEK 3D Printing Build Surface 3D Printer Plate for Heated Bed 300mm x 300mm (Square) - 3 Pieces
  • 3D Printing Build Surface sticks to the 3D printer platforms and improves the molding accuracy of the filament.
  • Build sheet adheres to a print bed to help the filament stick during printing and print without warping.
  • Compatible with ABS, PLA, HIPS, PETG, TPE, nylon, PC and so on. Allow to print surface without additional adhesives or tape.
  • Build sheet adheres to a print bed or heatbed to help the filament stick during printing and easy to clean and remove the printed part after that.
  • Color: Black. Material: Composite material. Size: About 300mm x 300mm/11.8 x 11.8 inch.

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Best Pei sheet for 3d printer

Here is the ranking of the best Pei sheet for 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Pei sheet for 3d printer and read the reviews left by real customers, see the Pei sheet for 3d printer ranking and find the store where to buy at the lowest price.

Pei sheet for 3d printer New
for Prusa I3 MK3 3D Printer Hot Bed Platform Double Sided Textured PEI Spring Steel Sheet Powder Coated PEI Build Plate
  • 【3D Printer Heat Bed Accessories Spring Steel Sheet】- Double sided Textured PEI Spring Steel Sheet for 3D printers. It is a must 3D Printer part for DIY or replace a new Prusa i3 MK3 printer hot bed, only fit for new magnetic MK52 heatbed, not include MK52 heat bed, not for other Prusa i3 serial.
  • 【PEI Powder Coated Hardended Steel Spring Sheet】- PEI powder coated hardended steel spring sheet never deforming, made of high strength spring steel sheet with Pei powder coat. No more PEI sheet replacement, no more 3M masking tape, no more abs juice, no more glue stick. Double-side, Easy to maintain and convenient to use.
  • 【Easy to Print and Remove】- Easy to print and Easy to remove the plastic parts by bending and popping it off when cooling, easy to print, easy to maintain. It is a must 3D Printer part for Prusa i3 MK3, DIY or replace a new printer hot bed build surface. keep the flatness across whole area, more balanced thermal conductivity.
  • 【Easy to Install】- PEI Powder Coated Double Sided Textured Heat Bed Steel Sheet For Prusa I3 MK3. Easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc. Make it possible to add inductive Z-probe and add ABL for some low-cost printers.
  • 【Package Includes】- 1 x Steel Sheet ( Only the Steel Sheet, other things not included); Size about 241x253.5mm, 3D Printer Heat Bed Double Sided Textured PEI Spring Powder Coated Steel Sheet Build Plate for Prusa I3 MK3.
Pei sheet for 3d printer New
130mm x 160mm x 3mm Borosilicate Glass Build Plate for 3D Printer Glass Bed (130 x 160 x 3mm Square)
  • Made from boro glass with high transparence.
  • High binding power when heating, easy to separate the plastic parts when cooling.
  • Avoid replacing plastic film.
  • Get you out of the trouble when plastic film decreased viscosity after a period of usage.
  • Material: Borosilicate Glass.
Pei sheet for 3d printer New
#N/A 2 Pieces Spring Steel Sheet W/B Plate 300x300mm For Creality CR-10S
  • Easy to print,easy to remove by bending and popping it off,easy to maintain.
  • Lower runing cost especially for printing farm.
  • Double-sided.
  • No longer need masking tape.No glue. No longer have ABS juice.No longer need to replace the PEI table
  • PEI powder coating.
Pei sheet for 3d printer New
Creativity Hotbed Glass Upgraded 3D Printer Platform Tempered Glass Plate Build Surface, 235x235x4mm Heated Bed for Ender 3/ Ender 5/ CR-20 3D Printer Accessories
  • Creative3D glass bed provides stronger adhesion, molds will stick on bed firmly without glue, avoiding the issue of print edges curling.
  • have prepared four binder clips for you.Using clips to fix the glass bed in place,make sure your plate is tightly fastened to the bed.
  • Improved 3D printer tempered glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.
  • Very easy to take off the model, no tools needed; This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.
  • The 3D printer parts is applicable with Creality 3D printers of Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20, CR-20 Pro, pls confirm if this tempered glass bed compatible with your printer.
Pei sheet for 3d printer New
Creality Ender3/Ender3 pro Glass Bed Build Plate 235mm235mm
  • Improved 3D printer tempered glass plate provides more flat and more smooth build surface than magnetic sheet or PEI sticker, ensuring high flatness for the bottom of model.
  • Very easy to take off the models; No tools needed when removing models.
  • Fit for Ender 3 / Ender 3X / Ender 3 Pro / Ender 5 / CR-20 Pro 3D printer.
  • The glass bed with extremely high flatness perfectly solves the problem that the 3D printing platform is not flat enough. If you have a higher requirement for print accuracy, it is recommended to use a glass plate instead of magnetic mat or pei sheet
  • Genuine product offered by brand Creality, as authorized agent, after sales support provided
Pei sheet for 3d printer New
FYSETC 3D Printer Platform Smooth PEI Sheet 7.8" x 7.8"/ 200 x 200mm Ultra Thin 0.01" High Heat Resistance Build Surface Platform for Reprap Anet A8/ A6 Monoprice Ultimate Tevo Prusa i3 Printer
  • Excellent PEI Platfrom for 3D Printer Heated Bed: with strong 3M Adhesive, compatible with ABS, PLA, HIPS and other filaments, no need for additional adhesives, tapes, or slurry.
  • SIZE: 7.8"x7.8"/ 200mm x 200mm, thickness is only 0.01"/0.3mm. The PEI sheet also can be cut down to desired size by scoring with a blade.
  • Special Import Material: made of Polyethermide which is inherently flame resistant and low in smoke production, high strength and heat resistance (up to 340° F), it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results.
  • FYSETC PEI is cut derectly from large flat sheets of PEI, this allows for the dimensional sheets level to be table top flat.
Pei sheet for 3d printer New
FYSETC 3D Printer Build Surface 10"x 8.8" Smooth PEI Sheet Ultra Thin 0.01" Build Plate Platform with 3M Adhesive for Reprap Pursa i3 MK2s Printer Heatbed
  • Premium Pure Ultem PEI Platfrom for 3D Printer Heated Bed: with strong 3M Adhesive, compatible with ABS, PLA, HIPS and other filaments, no need for additional adhesives, tapes, or slurry.
  • Size: 10"x8.8"/ 254mm x 224mm. thickness is only 0.01"/ 0.3mm, works great with auto bed leveling.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results, the PEI sheets also can be easily cut down to desired size by scoring with a utility knife or blade.
  • Special Import Material: made of Polyethermide which is inherently flame resistant and low in smoke production, high strength and heat resistance (up to 340° F), it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
  • After-sales Support: each one defective item can have the free replace or refund, If need more further please fell free to email or QA us, we and our engineers are very happy to assist you.
Pei sheet for 3d printer New
FYSETC 3D Printing Buildplate Steel Spring Sheet Bed 260x260mm(10.2x10.2 inch) Steel Plate, with PEI + Magnetic Sticker B Surface Printing Hotbed Parts for GEEETE A20,A20M,A20T
  • Custom designed PEI materials to make your print easy to adhere to the printing surface, flexible, removable.
  • Size: 260*260mm/ 10.2*10.2 inch, for GEEETE A20,A20M,A20T
  • Our magnets and films have all been formulated to resist over 130¡æ / 226F so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.
  • Simply adhere a PEI to the top of the FlexPlate, attach to your print bed via the Magnetic Mounting Base, perform a one-time z-height adjustment, and begin printing. When printing is complete, simply remove the FlexPlate, flex, and pop your prints off!
  • After Sales Guarantee: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you.
Pei sheet for 3d printer New
Fulament Spring Steel PEI Flex Bed for 3D Printing 220mm by 220mm and Magnetic Sticker with 3M Adhesive
  • No more scraping parts off the bed! Just remove magnetic bed and flex the plate to remove your parts! Then just place it back down to magnetically snap it into place
  • Temperature resistant mat allows you print in materials like PETG and ABS without an issue! (Maximum 130℃)
  • Comes with a sheet of bubble free pre-applied PEI
  • Magnetic sticker uses 3M adhesive and leaves no residue behind when removed!
  • Made using spring steel for durability and repeatability

Pei sheet for 3d printer | Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Pei sheet for 3d printer.

Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know.

Users who release reviews on Pei sheet for 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product.

The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs.

#N/A 2 Pieces Spring Steel Sheet W/B Plate 300x300mm For Creality CR-10S
  • Easy to print,easy to remove by bending and popping it off,easy to maintain.
  • Lower runing cost especially for printing farm.
  • Double-sided.
  • No longer need masking tape.No glue. No longer have ABS juice.No longer need to replace the PEI table
  • PEI powder coating.
for Prusa I3 MK3 3D Printer Hot Bed Platform Double Sided Textured PEI Spring Steel Sheet Powder Coated PEI Build Plate
  • 【3D Printer Heat Bed Accessories Spring Steel Sheet】- Double sided Textured PEI Spring Steel Sheet for 3D printers. It is a must 3D Printer part for DIY or replace a new Prusa i3 MK3 printer hot bed, only fit for new magnetic MK52 heatbed, not include MK52 heat bed, not for other Prusa i3 serial.
  • 【PEI Powder Coated Hardended Steel Spring Sheet】- PEI powder coated hardended steel spring sheet never deforming, made of high strength spring steel sheet with Pei powder coat. No more PEI sheet replacement, no more 3M masking tape, no more abs juice, no more glue stick. Double-side, Easy to maintain and convenient to use.
  • 【Easy to Print and Remove】- Easy to print and Easy to remove the plastic parts by bending and popping it off when cooling, easy to print, easy to maintain. It is a must 3D Printer part for Prusa i3 MK3, DIY or replace a new printer hot bed build surface. keep the flatness across whole area, more balanced thermal conductivity.
  • 【Easy to Install】- PEI Powder Coated Double Sided Textured Heat Bed Steel Sheet For Prusa I3 MK3. Easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc. Make it possible to add inductive Z-probe and add ABL for some low-cost printers.
  • 【Package Includes】- 1 x Steel Sheet ( Only the Steel Sheet, other things not included); Size about 241x253.5mm, 3D Printer Heat Bed Double Sided Textured PEI Spring Powder Coated Steel Sheet Build Plate for Prusa I3 MK3.
130mm x 160mm x 3mm Borosilicate Glass Build Plate for 3D Printer Glass Bed (130 x 160 x 3mm Square)
  • Made from boro glass with high transparence.
  • High binding power when heating, easy to separate the plastic parts when cooling.
  • Avoid replacing plastic film.
  • Get you out of the trouble when plastic film decreased viscosity after a period of usage.
  • Material: Borosilicate Glass.
Fulament Spring Steel PEI Flex Bed for 3D Printing 220mm by 220mm and Magnetic Sticker with 3M Adhesive
  • No more scraping parts off the bed! Just remove magnetic bed and flex the plate to remove your parts! Then just place it back down to magnetically snap it into place
  • Temperature resistant mat allows you print in materials like PETG and ABS without an issue! (Maximum 130℃)
  • Comes with a sheet of bubble free pre-applied PEI
  • Magnetic sticker uses 3M adhesive and leaves no residue behind when removed!
  • Made using spring steel for durability and repeatability
Creativity Hotbed Glass Upgraded 3D Printer Platform Tempered Glass Plate Build Surface, 235x235x4mm Heated Bed for Ender 3/ Ender 5/ CR-20 3D Printer Accessories
  • Creative3D glass bed provides stronger adhesion, molds will stick on bed firmly without glue, avoiding the issue of print edges curling.
  • have prepared four binder clips for you.Using clips to fix the glass bed in place,make sure your plate is tightly fastened to the bed.
  • Improved 3D printer tempered glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.
  • Very easy to take off the model, no tools needed; This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.
  • The 3D printer parts is applicable with Creality 3D printers of Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20, CR-20 Pro, pls confirm if this tempered glass bed compatible with your printer.

Pei sheet for 3d printer | Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

DISCOUNTLatest Pei sheet for 3d printer
Creality 3D PEI Magnetic Flexible Heated Bed 235 * 235mm Spring Steel Build Surface for Ender-3/pro/Ender-5
  • Creality flexible and removable PEI magnetic bed can stick to magnetics very well. This spring steel sheet has high strength and heat resistance. Suitable for pla, abs, peek and any other filaments.
  • Filaments stick easily onto the surface of this build surface, easy to take off prints from upgraded magnetic flexible build surface and easy to clean up it.
  • The PEI build surface has a smooth surface. The first layer will smooth like the glass bed.
  • Just let everything cool down remove the steel plate and gently flex/ bend/ twist and off it pops.
  • Size: 235 * 235 mm, works for ender3/ ender 3 pro/ ender 5 or any other printers with same printing size.
Latest Pei sheet for 3d printer
PEI Sheet 3D Printer Build Surface 220mm * 220mm * 0.2mm for PLA/ABS/HIPS
  • PEI (polyetherimide) sheets provide a 3D printed build surface that does not require tape, paste or adhesive.
  • Both ABS and PLA adhere well to the surface, eliminating the need for support rafts for better adhesion.
  • The stable use temperature is 190 degrees.
  • It helps to wipe the surface between the prints with isopropyl alcohol, methanol or soap, which will ensure that the PEI is clean and helps to bond.
  • Mild sanding with 5000 grit will also give PEI sheets a longer life.
Latest Pei sheet for 3d printer
SOOWAY PEI Sheet 0.3mm Thick 3D Printer Hot Bed Sticker Build Surface with 3M 468MP Adhesive Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8 (220 * 220mm)
  • This PEI sheet is Pre-applied with 3M 468MP Adhesive Transfer Tape for your convenience.
  • ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry.
  • REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling.
  • Sheet can be easily cut down to desired size by scoring with a utility knife.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results.
Latest Pei sheet for 3d printer
HAWKUNG PEI Sheet 11.8" x 11.8"(300x300mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive Build Platform Hot Bed Sticker Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8
  • This kind of PEI sheet is 3M 468MP tape pre-applied, which means you have no need to apply the 3M tape on the sheet anymore, and no slurry, or adhesive.It is especially convenient to use.
  • ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down.
  • Compared with other ordinary hot bed stickers, PEI sheet hot bed stickers are more resistant to high temperatures, more durable, and are not easily scratched.The bottom of the model printed on the PEI sheet is smoother and the model is easier to take out.
  • Easily clear the PEI sheet surface with a quick wide done with isopropyl alcohol, methyl alcohol, or soap for next use.Optionally, light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life.
  • Suitable material: ABS, PLA, PVC, NYLON, PCL, TPU, TPE, etc.
Latest Pei sheet for 3d printer
Domeilleur Spring Steel Sheet Heat Bed Platform Printing Buildplate+ PEI Sheet for 3D Printer Prusa i3 Mk3
  • Flexible metal Sheet Spring sheet plate cut for Prusa i3 Mk3 Mk2.5 !
  • Notched For Prusa MK3 Or Mk2.5 , fit only With new magnetic MK52 heatbed.
  • It includes 1pc spring steel sheet +1pc PEI Sheet
  • Fit for Prusa i3 Mk3 Mk2.5Model Number: Item Type:--Heatbed
  • Included:
DISCOUNTLatest Pei sheet for 3d printer
ERYONE Maflex Upgrade Magnetic Flexible 3D Printing Build Surface with Sticker for 3D Printer 235 * 235mm
  • 1.Compatible with heated beds of all FDM 3D printers.
  • 2.Filaments stick easily onto the surface of this build surface, easy to take off prints from upgraded magnetic flexible build surface and easy to clean up it.
  • 3.High quality stainless steel - ensure flexible, easy to take off and clean up; High quality magnetic material - ensure the build surface compatible with all FDM 3D printers heated beds.
  • 4.Magnetic material with pre-packed 3M adhesive, so it’s easy to get your bed perfectly flat before installing the upgrade magnetic flexible build surface.
  • 5.Choose the correct size for your printer: 310x310x2MM, 235x235x2MM, 220x220x2MM, 165x165x2MM available.
Latest Pei sheet for 3d printer
BIQU SSS Super Spring Steel Sheet Heatbed Platform 310310 MM PEI 3D Printer Parts Printing Build Plate PLA PETG for CR10 CR10S Pro
  • 【Strong Adhesion】After the hot bed is heated, the model is stable on the hot bed,and not easy to loose and fall off.
  • 【Easy to Use and Flexible】Has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
  • 【High Wear Resistance】The surface is wear-resistant, and the coating is not easy to fall off and wear.
  • 【High temperature resistance】Withstand temperature above 200 ℃.
  • 【Good compatibility】Can print a variety of consumables, such as PLA, PETG, TPU, ABS, etc.
Latest Pei sheet for 3d printer
UEETEK 3D Printing Build Surface 3D Printer Plate for Heated Bed 300mm x 300mm (Square) - 3 Pieces
  • 3D Printing Build Surface sticks to the 3D printer platforms and improves the molding accuracy of the filament.
  • Build sheet adheres to a print bed to help the filament stick during printing and print without warping.
  • Compatible with ABS, PLA, HIPS, PETG, TPE, nylon, PC and so on. Allow to print surface without additional adhesives or tape.
  • Build sheet adheres to a print bed or heatbed to help the filament stick during printing and easy to clean and remove the printed part after that.
  • Color: Black. Material: Composite material. Size: About 300mm x 300mm/11.8 x 11.8 inch.
DISCOUNTLatest Pei sheet for 3d printer
YOTINO 4Pcs 3D Printing Build Surface 3D Printer Plate for Heated Bed 200x200x3mm
  • [Easy to install and run] The micro textured surface of 3D Printer sticker can instantly locks to your 3D model quickly. Background is made of 3M adhesive, Once installed and calibrated, and won't have to worry about come unstuck.
  • [Eco-friendly and reusable ] 3D printer surface sticker can be reused for many consecutive builds without the need to change the printing surface Build sheet adheres and print without warping.
  • [Compatibility buildtak] 3D Printing Build Surface sticks to the 3D printer platforms. It is manufactured with premium material and compatible with ABS, PLA, HIPS, PETG, TPE, Nylon, PC and so on.
  • [Simply to removal] The sheet can be peeled cleanly from the platform, easy to maintenance and clean up.Prints come out better and the build plate is protected from print residue.
  • [Uniquely textured sheets] 3d printer bed build surface, replaces the blue masking tape or polyimide films such as Kapton Tape.It is made from heat-resistant materials to provide a stable build platform for 3D printed models whilst Improve the printing effect.

Pei sheet for 3d printer | Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Pei sheet for 3d printer could be subject to big discounts.

Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Pei sheet for 3d printer | Cost

Below we have selected a list of Pei sheet for 3d printer which are among the cheapest on the market. Just scroll through the list to find Pei sheet for 3d printer the cheapest products.

Pei sheet for 3d printer | Catalog

The product Pei sheet for 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.

Pei sheet for 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

Pei sheet for 3d printer New
for Prusa I3 MK3 3D Printer Hot Bed Platform Double Sided Textured PEI Spring Steel Sheet Powder Coated PEI Build Plate
  • 【3D Printer Heat Bed Accessories Spring Steel Sheet】- Double sided Textured PEI Spring Steel Sheet for 3D printers. It is a must 3D Printer part for DIY or replace a new Prusa i3 MK3 printer hot bed, only fit for new magnetic MK52 heatbed, not include MK52 heat bed, not for other Prusa i3 serial.
  • 【PEI Powder Coated Hardended Steel Spring Sheet】- PEI powder coated hardended steel spring sheet never deforming, made of high strength spring steel sheet with Pei powder coat. No more PEI sheet replacement, no more 3M masking tape, no more abs juice, no more glue stick. Double-side, Easy to maintain and convenient to use.
  • 【Easy to Print and Remove】- Easy to print and Easy to remove the plastic parts by bending and popping it off when cooling, easy to print, easy to maintain. It is a must 3D Printer part for Prusa i3 MK3, DIY or replace a new printer hot bed build surface. keep the flatness across whole area, more balanced thermal conductivity.
  • 【Easy to Install】- PEI Powder Coated Double Sided Textured Heat Bed Steel Sheet For Prusa I3 MK3. Easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc. Make it possible to add inductive Z-probe and add ABL for some low-cost printers.
  • 【Package Includes】- 1 x Steel Sheet ( Only the Steel Sheet, other things not included); Size about 241x253.5mm, 3D Printer Heat Bed Double Sided Textured PEI Spring Powder Coated Steel Sheet Build Plate for Prusa I3 MK3.
Pei sheet for 3d printer New
130mm x 160mm x 3mm Borosilicate Glass Build Plate for 3D Printer Glass Bed (130 x 160 x 3mm Square)
  • Made from boro glass with high transparence.
  • High binding power when heating, easy to separate the plastic parts when cooling.
  • Avoid replacing plastic film.
  • Get you out of the trouble when plastic film decreased viscosity after a period of usage.
  • Material: Borosilicate Glass.
Pei sheet for 3d printer New
#N/A 2 Pieces Spring Steel Sheet W/B Plate 300x300mm For Creality CR-10S
  • Easy to print,easy to remove by bending and popping it off,easy to maintain.
  • Lower runing cost especially for printing farm.
  • Double-sided.
  • No longer need masking tape.No glue. No longer have ABS juice.No longer need to replace the PEI table
  • PEI powder coating.
Pei sheet for 3d printer New
Creativity Hotbed Glass Upgraded 3D Printer Platform Tempered Glass Plate Build Surface, 235x235x4mm Heated Bed for Ender 3/ Ender 5/ CR-20 3D Printer Accessories
  • Creative3D glass bed provides stronger adhesion, molds will stick on bed firmly without glue, avoiding the issue of print edges curling.
  • have prepared four binder clips for you.Using clips to fix the glass bed in place,make sure your plate is tightly fastened to the bed.
  • Improved 3D printer tempered glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.
  • Very easy to take off the model, no tools needed; This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.
  • The 3D printer parts is applicable with Creality 3D printers of Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20, CR-20 Pro, pls confirm if this tempered glass bed compatible with your printer.
Pei sheet for 3d printer New
Creality Ender3/Ender3 pro Glass Bed Build Plate 235mm235mm
  • Improved 3D printer tempered glass plate provides more flat and more smooth build surface than magnetic sheet or PEI sticker, ensuring high flatness for the bottom of model.
  • Very easy to take off the models; No tools needed when removing models.
  • Fit for Ender 3 / Ender 3X / Ender 3 Pro / Ender 5 / CR-20 Pro 3D printer.
  • The glass bed with extremely high flatness perfectly solves the problem that the 3D printing platform is not flat enough. If you have a higher requirement for print accuracy, it is recommended to use a glass plate instead of magnetic mat or pei sheet
  • Genuine product offered by brand Creality, as authorized agent, after sales support provided
Pei sheet for 3d printer New
FYSETC 3D Printer Platform Smooth PEI Sheet 7.8" x 7.8"/ 200 x 200mm Ultra Thin 0.01" High Heat Resistance Build Surface Platform for Reprap Anet A8/ A6 Monoprice Ultimate Tevo Prusa i3 Printer
  • Excellent PEI Platfrom for 3D Printer Heated Bed: with strong 3M Adhesive, compatible with ABS, PLA, HIPS and other filaments, no need for additional adhesives, tapes, or slurry.
  • SIZE: 7.8"x7.8"/ 200mm x 200mm, thickness is only 0.01"/0.3mm. The PEI sheet also can be cut down to desired size by scoring with a blade.
  • Special Import Material: made of Polyethermide which is inherently flame resistant and low in smoke production, high strength and heat resistance (up to 340° F), it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results.
  • FYSETC PEI is cut derectly from large flat sheets of PEI, this allows for the dimensional sheets level to be table top flat.
Pei sheet for 3d printer New
FYSETC 3D Printer Build Surface 10"x 8.8" Smooth PEI Sheet Ultra Thin 0.01" Build Plate Platform with 3M Adhesive for Reprap Pursa i3 MK2s Printer Heatbed
  • Premium Pure Ultem PEI Platfrom for 3D Printer Heated Bed: with strong 3M Adhesive, compatible with ABS, PLA, HIPS and other filaments, no need for additional adhesives, tapes, or slurry.
  • Size: 10"x8.8"/ 254mm x 224mm. thickness is only 0.01"/ 0.3mm, works great with auto bed leveling.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results, the PEI sheets also can be easily cut down to desired size by scoring with a utility knife or blade.
  • Special Import Material: made of Polyethermide which is inherently flame resistant and low in smoke production, high strength and heat resistance (up to 340° F), it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
  • After-sales Support: each one defective item can have the free replace or refund, If need more further please fell free to email or QA us, we and our engineers are very happy to assist you.
Pei sheet for 3d printer New
FYSETC 3D Printing Buildplate Steel Spring Sheet Bed 260x260mm(10.2x10.2 inch) Steel Plate, with PEI + Magnetic Sticker B Surface Printing Hotbed Parts for GEEETE A20,A20M,A20T
  • Custom designed PEI materials to make your print easy to adhere to the printing surface, flexible, removable.
  • Size: 260*260mm/ 10.2*10.2 inch, for GEEETE A20,A20M,A20T
  • Our magnets and films have all been formulated to resist over 130¡æ / 226F so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.
  • Simply adhere a PEI to the top of the FlexPlate, attach to your print bed via the Magnetic Mounting Base, perform a one-time z-height adjustment, and begin printing. When printing is complete, simply remove the FlexPlate, flex, and pop your prints off!
  • After Sales Guarantee: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you.
Pei sheet for 3d printer New
Fulament Spring Steel PEI Flex Bed for 3D Printing 220mm by 220mm and Magnetic Sticker with 3M Adhesive
  • No more scraping parts off the bed! Just remove magnetic bed and flex the plate to remove your parts! Then just place it back down to magnetically snap it into place
  • Temperature resistant mat allows you print in materials like PETG and ABS without an issue! (Maximum 130℃)
  • Comes with a sheet of bubble free pre-applied PEI
  • Magnetic sticker uses 3M adhesive and leaves no residue behind when removed!
  • Made using spring steel for durability and repeatability

Pei sheet for 3d printer | Where to buy?

If you are asking yourself where to buy Pei sheet for 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Pei sheet for 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Pei sheet for 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Pei sheet for 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon.

The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases.

Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Pei sheet for 3d printer used.

Pei sheet for 3d printer | Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount.

#N/A 2 Pieces Spring Steel Sheet W/B Plate 300x300mm For Creality CR-10S
  • Easy to print,easy to remove by bending and popping it off,easy to maintain.
  • Lower runing cost especially for printing farm.
  • Double-sided.
  • No longer need masking tape.No glue. No longer have ABS juice.No longer need to replace the PEI table
  • PEI powder coating.
for Prusa I3 MK3 3D Printer Hot Bed Platform Double Sided Textured PEI Spring Steel Sheet Powder Coated PEI Build Plate
  • 【3D Printer Heat Bed Accessories Spring Steel Sheet】- Double sided Textured PEI Spring Steel Sheet for 3D printers. It is a must 3D Printer part for DIY or replace a new Prusa i3 MK3 printer hot bed, only fit for new magnetic MK52 heatbed, not include MK52 heat bed, not for other Prusa i3 serial.
  • 【PEI Powder Coated Hardended Steel Spring Sheet】- PEI powder coated hardended steel spring sheet never deforming, made of high strength spring steel sheet with Pei powder coat. No more PEI sheet replacement, no more 3M masking tape, no more abs juice, no more glue stick. Double-side, Easy to maintain and convenient to use.
  • 【Easy to Print and Remove】- Easy to print and Easy to remove the plastic parts by bending and popping it off when cooling, easy to print, easy to maintain. It is a must 3D Printer part for Prusa i3 MK3, DIY or replace a new printer hot bed build surface. keep the flatness across whole area, more balanced thermal conductivity.
  • 【Easy to Install】- PEI Powder Coated Double Sided Textured Heat Bed Steel Sheet For Prusa I3 MK3. Easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc. Make it possible to add inductive Z-probe and add ABL for some low-cost printers.
  • 【Package Includes】- 1 x Steel Sheet ( Only the Steel Sheet, other things not included); Size about 241x253.5mm, 3D Printer Heat Bed Double Sided Textured PEI Spring Powder Coated Steel Sheet Build Plate for Prusa I3 MK3.
130mm x 160mm x 3mm Borosilicate Glass Build Plate for 3D Printer Glass Bed (130 x 160 x 3mm Square)
  • Made from boro glass with high transparence.
  • High binding power when heating, easy to separate the plastic parts when cooling.
  • Avoid replacing plastic film.
  • Get you out of the trouble when plastic film decreased viscosity after a period of usage.
  • Material: Borosilicate Glass.
Fulament Spring Steel PEI Flex Bed for 3D Printing 220mm by 220mm and Magnetic Sticker with 3M Adhesive
  • No more scraping parts off the bed! Just remove magnetic bed and flex the plate to remove your parts! Then just place it back down to magnetically snap it into place
  • Temperature resistant mat allows you print in materials like PETG and ABS without an issue! (Maximum 130℃)
  • Comes with a sheet of bubble free pre-applied PEI
  • Magnetic sticker uses 3M adhesive and leaves no residue behind when removed!
  • Made using spring steel for durability and repeatability
Creativity Hotbed Glass Upgraded 3D Printer Platform Tempered Glass Plate Build Surface, 235x235x4mm Heated Bed for Ender 3/ Ender 5/ CR-20 3D Printer Accessories
  • Creative3D glass bed provides stronger adhesion, molds will stick on bed firmly without glue, avoiding the issue of print edges curling.
  • have prepared four binder clips for you.Using clips to fix the glass bed in place,make sure your plate is tightly fastened to the bed.
  • Improved 3D printer tempered glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.
  • Very easy to take off the model, no tools needed; This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.
  • The 3D printer parts is applicable with Creality 3D printers of Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20, CR-20 Pro, pls confirm if this tempered glass bed compatible with your printer.

Pei sheet for 3d printer | Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits.

By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Pei sheet for 3d printer.

Rating: 2.5 of 5 - 14 votes
1 Star2 Stars3 Stars4 Stars5 Stars (14 votes, average: 2.50 out of 5)
Loading...

Best Deals

3d printer dial indicator Reviews and Best Deals


Mooz 3d printer Reviews and Best Deals


Sls 3d printer for sale Reviews and Best Deals