Pei sheet 3d printer Reviews and Best Deals

Online product reviews and comparisons for Pei sheet 3d printer.

Latest Pei sheet 3d printer
Toaiot 3D Printing Build Plate Steel Spring Steel Sheet Heat Bed 260x260mm /10.2x10.2 inch with PEI + Magnetic Sticker B Surface Printing Hotbed Parts for GEEETE A20 / A20M / A20T / Tronxy XY2 Pro
  • Upgrade 3D Printer hotbed surface to make your print easy to adhere to the printing surface, flexible, removable,Note: We have helped you paste PEI on the steel plate, you don’t need to worry about bubbles anymore.
  • Size: 260*260mm/ 10.2*10.2 inch, for GEEETE A20,A20M,A20T
  • Our magnets and films have all been formulated to resist over 130¡æ / 226F so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.
  • Simply adhere a PEI to the top of the FlexPlate, attach to your print bed via the Magnetic Mounting Base, perform a one-time z-height adjustment, and begin printing. When printing is complete, simply remove the FlexPlate, flex, and pop your prints off!
  • Note: After finishing printing, please wait a few minutes for it to cool down, it can be easily obtained by bending. If you pull directly by hand without cooling, it will damage the PEI and leave a hole in the PEI!
Latest Pei sheet 3d printer
Toaiot 3D Printer Build Surface Smooth PEI Sheet 9.2 x 9.2 inch / 235 x 235mm 0.01 inch Thickness Build Plate with Strong 3M 468MP Adhesive for ABS PLA PETG Filament for Ender 3
  • Excellent PEI Platfrom for 3D Printer Heated Bed: With strong 3M Adhesive, compatible with ABS / PLA / HIPS and other filaments, no need for additional adhesives, tapes, or slurry.
  • Special Import Material: made of Polyethermide which is inherently flame resistant and low in smoke production, high strength and heat resistance (up to 340° F), it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
  • Size: 9.2 inchx9.2 inch / 235mm x 235mm. thickness is only 0.01"/ 0.3mm, very thin and level to be table top flat.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results, the PEI sheets also can be easily cut down to desired size by scoring with a utility knife or blade.
  • After-sales service: If you encounter any defective products, we will provide you with a replacement or refund for free, if you encounter technical problems,Please contact us,We will do our best to help you!
DISCOUNTLatest Pei sheet 3d printer
Creality 3D PEI Magnetic Flexible Heated Bed 235 * 235mm Spring Steel Build Surface for Ender-3/pro/Ender-5
  • Creality flexible and removable PEI magnetic bed can stick to magnetics very well. This spring steel sheet has high strength and heat resistance. Suitable for pla, abs, peek and any other filaments.
  • Filaments stick easily onto the surface of this build surface, easy to take off prints from upgraded magnetic flexible build surface and easy to clean up it.
  • The PEI build surface has a smooth surface. The first layer will smooth like the glass bed.
  • Just let everything cool down remove the steel plate and gently flex/ bend/ twist and off it pops.
  • Size: 235 * 235 mm, works for ender3/ ender 3 pro/ ender 5 or any other printers with same printing size.
Latest Pei sheet 3d printer
Latest Pei sheet 3d printer
HAWKUNG PEI Sheet 11.8" x 11.8"(300x300mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive Build Platform Hot Bed Sticker Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8
  • This kind of PEI sheet is 3M 468MP tape pre-applied, which means you have no need to apply the 3M tape on the sheet anymore, and no slurry, or adhesive.It is especially convenient to use.
  • ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down.
  • Compared with other ordinary hot bed stickers, PEI sheet hot bed stickers are more resistant to high temperatures, more durable, and are not easily scratched.The bottom of the model printed on the PEI sheet is smoother and the model is easier to take out.
  • Easily clear the PEI sheet surface with a quick wide done with isopropyl alcohol, methyl alcohol, or soap for next use.Optionally, light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life.
  • Suitable material: ABS, PLA, PVC, NYLON, PCL, TPU, TPE, etc.
Latest Pei sheet 3d printer
Toaiot Spring Steel Build Plate for CR-10 10S Pro CR-X MP Maker Pro 3D Printer 3D Printing Sheet Bed Steel Plate 310x310mm/ 12.2x12.2 inch with PEI + Magnetic Sticker B Surface Printing Hotbed Parts
  • Upgrade 3D Printer hotbed surface to make your print easy to adhere to the printing surface, flexible, removable,Note: We have helped you paste PEI on the steel plate, you don’t need to worry about bubbles anymore,
  • Size: 310*310mm/ 12.2*12.2 inch, PEI Size:305mm,for CR-10 10S Pro CR-X MP Maker Pro.
  • Our magnetis and films have all been formulated to resist over 130¡æ / 226F so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.Compatible with PLA ABS PETG TPU and other most filaments
  • Simply adhere a PEI to the top of the FlexPlate, attach to your print bed via the Magnetic Mounting Base, perform a one-time z-height adjustment, and begin printing. When printing is complete, simply remove the FlexPlate, flex, and pop your prints off!
  • After-sales service: If you encounter any defective products, we will provide you with a replacement or refund for free, if you encounter technical problems,Please contact us,We will do our best to help you!
Latest Pei sheet 3d printer
Toaiot 3D Printer 310x310mm/12.2x12.2 inch Gold Double Sided Textured PEI Powder Coated Spring Steel Build Plate Steel Sheet with Magnetic Platform Side B for CR10 CR10S
  • Newly upgraded PEI coated steel plate,gift:Magnetic Platform Side B.
  • Size: 310mm x 310mm/12.2x12.2 inch,With CR10 CR10S Compatible.
  • It's spring steel sheet and PEI 2 in 1 item, made of high strength spring steel sheet with pei powder coat. No more PEI sheet replacement, no more 3M masking tape, no more abs juice, no more glue stick.
  • Easy to install, easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc.
  • If you want to replace the magnetic B-base, look for this ASIN: B08FY9LR2G in our "liying" shop.
Latest Pei sheet 3d printer
UEETEK 3D Printing Build Surface 3D Printer Plate for Heated Bed 300mm x 300mm (Square) - 3 Pieces
  • 3D Printing Build Surface sticks to the 3D printer platforms and improves the molding accuracy of the filament.
  • Build sheet adheres to a print bed to help the filament stick during printing and print without warping.
  • Compatible with ABS, PLA, HIPS, PETG, TPE, nylon, PC and so on. Allow to print surface without additional adhesives or tape.
  • Build sheet adheres to a print bed or heatbed to help the filament stick during printing and easy to clean and remove the printed part after that.
  • Color: Black. Material: Composite material. Size: About 300mm x 300mm/11.8 x 11.8 inch.
Latest Pei sheet 3d printer
Toaiot Spring Steel Build Plate Round Dia 265X265mm/10.4x10.4 inch Steel Sheet Heat Bed for Flsun QQ-S Delta 3D Printer with PEI + Magnetic Sticker B Surface Printing Hotbed Parts
  • Upgrade 3D Printer hotbed surface to make your print easy to adhere to the printing surface, flexible, removable,Note: We have helped you paste PEI on the steel plate, you don’t need to worry about bubbles anymore,
  • Size: 265*265mm/ 10.4*10.4 inch, for Flsun QQ-S Delta。
  • Our magnetis and films have all been formulated to resist over 130°C / 226F so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.Compatible with PLA ABS PETG TPU and other most filaments
  • Simply adhere a PEI to the top of the FlexPlate, attach to your print bed via the Magnetic Mounting Base, perform a one-time z-height adjustment, and begin printing. When printing is complete, simply remove the FlexPlate, flex, and pop your prints off!
  • If you need 220x220mm round steel plate suitable for Flsun Q5, please search for ASIN:B08JPGVPH4 .If you want to buy other size, feel free to send us a message, We will do our best to help you

Buy Pei sheet 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Pei sheet 3d printer, buy Pei sheet 3d printer directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Pei sheet 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


DISCOUNTBest
Creality 3D PEI Magnetic Flexible Heated Bed 235 * 235mm Spring Steel Build Surface for Ender-3/pro/Ender-5
  • Creality flexible and removable PEI magnetic bed can stick to magnetics very well. This spring steel sheet has high strength and heat resistance. Suitable for pla, abs, peek and any other filaments.
  • Filaments stick easily onto the surface of this build surface, easy to take off prints from upgraded magnetic flexible build surface and easy to clean up it.
  • The PEI build surface has a smooth surface. The first layer will smooth like the glass bed.
  • Just let everything cool down remove the steel plate and gently flex/ bend/ twist and off it pops.
  • Size: 235 * 235 mm, works for ender3/ ender 3 pro/ ender 5 or any other printers with same printing size.
Best
HAWKUNG PEI Sheet 11.8" x 11.8"(300x300mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive Build Platform Hot Bed Sticker Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8
  • This kind of PEI sheet is 3M 468MP tape pre-applied, which means you have no need to apply the 3M tape on the sheet anymore, and no slurry, or adhesive.It is especially convenient to use.
  • ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down.
  • Compared with other ordinary hot bed stickers, PEI sheet hot bed stickers are more resistant to high temperatures, more durable, and are not easily scratched.The bottom of the model printed on the PEI sheet is smoother and the model is easier to take out.
  • Easily clear the PEI sheet surface with a quick wide done with isopropyl alcohol, methyl alcohol, or soap for next use.Optionally, light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life.
  • Suitable material: ABS, PLA, PVC, NYLON, PCL, TPU, TPE, etc.
Best
Toaiot 3D Printer Build Surface Smooth PEI Sheet 9.2 x 9.2 inch / 235 x 235mm 0.01 inch Thickness Build Plate with Strong 3M 468MP Adhesive for ABS PLA PETG Filament for Ender 3
  • Excellent PEI Platfrom for 3D Printer Heated Bed: With strong 3M Adhesive, compatible with ABS / PLA / HIPS and other filaments, no need for additional adhesives, tapes, or slurry.
  • Special Import Material: made of Polyethermide which is inherently flame resistant and low in smoke production, high strength and heat resistance (up to 340° F), it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
  • Size: 9.2 inchx9.2 inch / 235mm x 235mm. thickness is only 0.01"/ 0.3mm, very thin and level to be table top flat.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results, the PEI sheets also can be easily cut down to desired size by scoring with a utility knife or blade.
  • After-sales service: If you encounter any defective products, we will provide you with a replacement or refund for free, if you encounter technical problems,Please contact us,We will do our best to help you!
Best
Toaiot 3D Printing Build Plate Steel Spring Steel Sheet Heat Bed 260x260mm /10.2x10.2 inch with PEI + Magnetic Sticker B Surface Printing Hotbed Parts for GEEETE A20 / A20M / A20T / Tronxy XY2 Pro
  • Upgrade 3D Printer hotbed surface to make your print easy to adhere to the printing surface, flexible, removable,Note: We have helped you paste PEI on the steel plate, you don’t need to worry about bubbles anymore.
  • Size: 260*260mm/ 10.2*10.2 inch, for GEEETE A20,A20M,A20T
  • Our magnets and films have all been formulated to resist over 130¡æ / 226F so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.
  • Simply adhere a PEI to the top of the FlexPlate, attach to your print bed via the Magnetic Mounting Base, perform a one-time z-height adjustment, and begin printing. When printing is complete, simply remove the FlexPlate, flex, and pop your prints off!
  • Note: After finishing printing, please wait a few minutes for it to cool down, it can be easily obtained by bending. If you pull directly by hand without cooling, it will damage the PEI and leave a hole in the PEI!
Best
Toaiot 3D Printer 220x220mm/8.6x8.6 inch Gold Double Sided Textured PEI Powder Coated Spring Steel Build Plate Steel Sheet with Magnetic Platform B for Anet A8/Wanhao Duplicator i3/Monoprice Maker
  • Newly upgraded PEI coated steel plate,gift:Magnetic Platform Side B.
  • Size: 220mm x 220mm/8.6x8.6 inch,With Anet A8/Wanhao Duplicator i3/Monoprice Maker Compatible.
  • It's spring steel sheet and PEI 2 in 1 item, made of high strength spring steel sheet with pei powder coat. No more PEI sheet replacement, no more 3M masking tape, no more abs juice, no more glue stick.
  • Easy to install, easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc.
  • After-sales service: If you encounter any defective products, we will provide you with a replacement or refund for free, if you encounter technical problems,Please contact us,We will do our best to help you!

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Pei sheet 3d printer

Here is the ranking of the best Pei sheet 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Pei sheet 3d printer and read the reviews left by real customers, see the Pei sheet 3d printer ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Pei sheet 3d printer New
Printing Plate 3D Printer Pack of 3 Surface Plate Sticker Table Heating Bed Replacement Tape 235 x 235 mm Reusable Adhesive Surface Plate for 3D Printers
  • Excellent compatibility: the PLA 3D printing surface replacement adhesive is an excellent printing material and compatible with ABS, PLA, HIPS, PET, glass, etc.
  • Durable and reusable: the surface adhesive of the 3D printer can be reused many times and prints without deformation, neat and tidy. The special coating is inorganic and has a hardness of 8 Mohs, it can also work 80 °C - 100 °C.
  • Easy to install and excellent adhesion: the single sheet design and the 3D printer sticker can be quickly attached to your 3D model. A 3 metre sticker on the back is once installed and calibrated. This surface of the plate is covered with a coating of micropores that allow a strong adhesion of the pressure. Printed patterns can be easily removed by hand.
  • Easy to clean: the sheet can be cleanly removed from the platform. If it remains stained, it can also be cleaned very easily with a dispersing agent or alcohol. This heated bed plate can be easily cleaned with a cloth soaked in alcohol.
  • Size and application: 235 x 235 mm (9.25 x 9.25 inches); suitable for Creality Ender 3, Ender 3 Pro, Creality CR-20, Ender 5, Tevo Flash, Geeetech A10 and A10M, Robo R1.
Pei sheet 3d printer New
humorous Spring Steel Build Plate Spring Steel Build Plate For 3D Printer Flexible Build System For Resin 3D Printer Spring Sheet Bed Steel Plate Printer Accessories 135X80mm
  • Never Scratch Again: Just bend the printing plate after finishing printing, and then remove the part immediately.
  • The special surface treatment makes the printed parts better adsorb on the panel.
  • High-quality Materials: Made of high-quality spring steel and adhesive. Spring steel with high chromium content can prevent rust for life.
  • Handle design, easy to take and install, etched on both sides, large part adhesion, easy to lift.
  • Applicable Models: For Photon/s, for Photon mono/SE, for Shadow5 .5s.
Pei sheet 3d printer New
PEI Film Polypropylene Build Plates for 3D Printer Platform Easy to Remove Good Adhesive (235 * 235mm)
  • PEI sheets can provide 3D printed build surfaces that do not require tape, paste or adhesives. High strength and heat resistance allows the polymer to perform consistently in high temperature environments.
  • Both ABS and PLA adhere very firmly to the surface, eliminating the need for a support raft for better adhesion. The long‑term temperature is 120 degrees celsius.
  • Adhesive has been pre‑applied to PEI; just peel off the tape liner to quickly adhere to the bed
  • PEI is the perfect unprepared construction surface, which can be reused indefinitely for multiple printing; clean with isopropyl alcohol between printing or clean with acetone on the cold bed
  • When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
Pei sheet 3d printer New
PEI Film Polypropylene Build Plates for 3D Printer Platform Easy to Remove Good Adhesive (310 * 310)
  • PEI sheets can provide 3D printed build surfaces that do not require tape, paste or adhesives. High strength and heat resistance allows the polymer to perform consistently in high temperature environments.
  • Both ABS and PLA adhere very firmly to the surface, eliminating the need for a support raft for better adhesion. The long‑term temperature is 120 degrees celsius.
  • Adhesive has been pre‑applied to PEI; just peel off the tape liner to quickly adhere to the bed
  • PEI is the perfect unprepared construction surface, which can be reused indefinitely for multiple printing; clean with isopropyl alcohol between printing or clean with acetone on the cold bed
  • When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
Pei sheet 3d printer New
BCZAMD Prusa Mini Upgrade Parts Spring Steel Sheet Double Sided Textured PEI Powder Coated Construction Board for Prusa Mini Headbed Surface, 196.3 x 190 mm Gold 7.7 x 7.4 Inches
  • This product is the double-sided textured PEI powder-coated spring steel sheet for the original Prusa Mini heat bed.
  • Easy to remove plastic parts by bending and jumping when cooling, easy to print, easy to maintain.
  • Size: 196.3 x 190 mm / 7.7 x 7.4 inches, thickness: approx. 0.8 mm / 0.03 inches.
  • If you have any problems with this item, please email us with your order number. We will do our best to help you.
  • Compatible with most filaments such as PETG ABS TPU wood etc.
Pei sheet 3d printer New
Odoukey 3d Printer Bedstead Construction Panel Pei Spring Powder Coated Steel Plate Double Side Texture Compatible with Prusa I3
  • MATERIAL: Double sided 3D printer print bed is made of high-strength spring steel sheet with PEI powder coating
  • EASY TO USE: 3D printer print bed is easy to remove by bending and popping it off; No more masking tape and glue stick
  • EASY TO CARE: No more PEI sheet replacement, no more adhesive tape, no more abs juice
  • UNIVERSAL: 3D printer printing plate is compatible with Anet A8 A6 Wanhao I3 Creality Ender 5, Pulse printer with FlexPlate installation, Similar bed size printer with Magnetic Base
  • LOW COST: 3D printer printing plate lowers runing cost especially for printing farm
Pei sheet 3d printer New
IPOTCH Heated Warm Bed Heated Bed Platform for Creality CR 10S Printer 300 X 300 Mm
  • Our magnets and films have all been formulated to resist over 130¡æ / 226F so you can your bed to high temps for specialty filaments and not worry about loss of performance.
  • Simply remove the hot bed Plate from the hot bed Plate Base on your 3D printer when the print is finished.
  • Flexible Heated Bed is compatible for Creality CR-10S, JG Aurora A5 and A5x, Geeetech A30, Folger FT-5, Tevo Black Widow and , Anet E12, TronXY X3s and X5SA, , Alfawise U20, Wanhao Duplicator 9, RAISCUBE T8 Lulzbot Taz 6, Hictop CR-10 and more 3D printer
  • Custom designed PEI materials to make your print easy to adhere to the printing surface.
  • Custom designed high quality Spring Steel, flexible and can be adsorption by base.
Pei sheet 3d printer New
RONGW JKUNYU Gold 235x235mm Double Texture PEI Sheet Powder Steel Plate with 6 Magnetic Block for 3D Printer 3D printer parts
  • Lower runing cost especially for printing farm.
  • Easy to maintain.
  • Easy to print.
  • Easy to remove by bending and popping it off.
  • Double-sided.
Pei sheet 3d printer New
L-Yune,bolt 1pc MIC-6 Aluminum Z Build Plate Kit 110/220V Silicone AC Heater Pad PEI 3M Sheet Kit For VORON 2.4 3d Printer DIY Parts (Color : 110V, Size : 350mm build)
  • MIC-6 aluminum Plate is drilled and counterbored for M3 socket head cap screws
  • Plate has holes tapped for M3 on the bottom side that can be used for thermal fuse attachment and grounding.
  • Precisely drilled on drill press using counterbore bit110/220V Silicone AC heater has a built-in NTC 100K thermistor.
  • Heater and PEI sheet have 3m adhesive pre-applied. Parts are not glued together. Assembly is required.Includes mounting hardware.
  • Work with VORON 2.4 version.

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Pei sheet 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Pei sheet 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

Printing Plate 3D Printer Pack of 3 Surface Plate Sticker Table Heating Bed Replacement Tape 235 x 235 mm Reusable Adhesive Surface Plate for 3D Printers
  • Excellent compatibility: the PLA 3D printing surface replacement adhesive is an excellent printing material and compatible with ABS, PLA, HIPS, PET, glass, etc.
  • Durable and reusable: the surface adhesive of the 3D printer can be reused many times and prints without deformation, neat and tidy. The special coating is inorganic and has a hardness of 8 Mohs, it can also work 80 °C - 100 °C.
  • Easy to install and excellent adhesion: the single sheet design and the 3D printer sticker can be quickly attached to your 3D model. A 3 metre sticker on the back is once installed and calibrated. This surface of the plate is covered with a coating of micropores that allow a strong adhesion of the pressure. Printed patterns can be easily removed by hand.
  • Easy to clean: the sheet can be cleanly removed from the platform. If it remains stained, it can also be cleaned very easily with a dispersing agent or alcohol. This heated bed plate can be easily cleaned with a cloth soaked in alcohol.
  • Size and application: 235 x 235 mm (9.25 x 9.25 inches); suitable for Creality Ender 3, Ender 3 Pro, Creality CR-20, Ender 5, Tevo Flash, Geeetech A10 and A10M, Robo R1.
BCZAMD Prusa Mini Upgrade Parts Spring Steel Sheet Double Sided Textured PEI Powder Coated Construction Board for Prusa Mini Headbed Surface, 196.3 x 190 mm Gold 7.7 x 7.4 Inches
  • This product is the double-sided textured PEI powder-coated spring steel sheet for the original Prusa Mini heat bed.
  • Easy to remove plastic parts by bending and jumping when cooling, easy to print, easy to maintain.
  • Size: 196.3 x 190 mm / 7.7 x 7.4 inches, thickness: approx. 0.8 mm / 0.03 inches.
  • If you have any problems with this item, please email us with your order number. We will do our best to help you.
  • Compatible with most filaments such as PETG ABS TPU wood etc.
IPOTCH Heated Warm Bed Heated Bed Platform for Creality CR 10S Printer 300 X 300 Mm
  • Our magnets and films have all been formulated to resist over 130¡æ / 226F so you can your bed to high temps for specialty filaments and not worry about loss of performance.
  • Simply remove the hot bed Plate from the hot bed Plate Base on your 3D printer when the print is finished.
  • Flexible Heated Bed is compatible for Creality CR-10S, JG Aurora A5 and A5x, Geeetech A30, Folger FT-5, Tevo Black Widow and , Anet E12, TronXY X3s and X5SA, , Alfawise U20, Wanhao Duplicator 9, RAISCUBE T8 Lulzbot Taz 6, Hictop CR-10 and more 3D printer
  • Custom designed PEI materials to make your print easy to adhere to the printing surface.
  • Custom designed high quality Spring Steel, flexible and can be adsorption by base.
RONGW JKUNYU Gold 235x235mm Double Texture PEI Sheet Powder Steel Plate with 6 Magnetic Block for 3D Printer 3D printer parts
  • Lower runing cost especially for printing farm.
  • Easy to maintain.
  • Easy to print.
  • Easy to remove by bending and popping it off.
  • Double-sided.
L-Yune,bolt 1pc MIC-6 Aluminum Z Build Plate Kit 110/220V Silicone AC Heater Pad PEI 3M Sheet Kit For VORON 2.4 3d Printer DIY Parts (Color : 110V, Size : 350mm build)
  • MIC-6 aluminum Plate is drilled and counterbored for M3 socket head cap screws
  • Plate has holes tapped for M3 on the bottom side that can be used for thermal fuse attachment and grounding.
  • Precisely drilled on drill press using counterbore bit110/220V Silicone AC heater has a built-in NTC 100K thermistor.
  • Heater and PEI sheet have 3m adhesive pre-applied. Parts are not glued together. Assembly is required.Includes mounting hardware.
  • Work with VORON 2.4 version.

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Pei sheet 3d printer actually costs.

Latest Pei sheet 3d printer
Toaiot 3D Printing Build Plate Steel Spring Steel Sheet Heat Bed 260x260mm /10.2x10.2 inch with PEI + Magnetic Sticker B Surface Printing Hotbed Parts for GEEETE A20 / A20M / A20T / Tronxy XY2 Pro
  • Upgrade 3D Printer hotbed surface to make your print easy to adhere to the printing surface, flexible, removable,Note: We have helped you paste PEI on the steel plate, you don’t need to worry about bubbles anymore.
  • Size: 260*260mm/ 10.2*10.2 inch, for GEEETE A20,A20M,A20T
  • Our magnets and films have all been formulated to resist over 130¡æ / 226F so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.
  • Simply adhere a PEI to the top of the FlexPlate, attach to your print bed via the Magnetic Mounting Base, perform a one-time z-height adjustment, and begin printing. When printing is complete, simply remove the FlexPlate, flex, and pop your prints off!
  • Note: After finishing printing, please wait a few minutes for it to cool down, it can be easily obtained by bending. If you pull directly by hand without cooling, it will damage the PEI and leave a hole in the PEI!
Latest Pei sheet 3d printer
Toaiot 3D Printer Build Surface Smooth PEI Sheet 9.2 x 9.2 inch / 235 x 235mm 0.01 inch Thickness Build Plate with Strong 3M 468MP Adhesive for ABS PLA PETG Filament for Ender 3
  • Excellent PEI Platfrom for 3D Printer Heated Bed: With strong 3M Adhesive, compatible with ABS / PLA / HIPS and other filaments, no need for additional adhesives, tapes, or slurry.
  • Special Import Material: made of Polyethermide which is inherently flame resistant and low in smoke production, high strength and heat resistance (up to 340° F), it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
  • Size: 9.2 inchx9.2 inch / 235mm x 235mm. thickness is only 0.01"/ 0.3mm, very thin and level to be table top flat.
  • Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results, the PEI sheets also can be easily cut down to desired size by scoring with a utility knife or blade.
  • After-sales service: If you encounter any defective products, we will provide you with a replacement or refund for free, if you encounter technical problems,Please contact us,We will do our best to help you!
DISCOUNTLatest Pei sheet 3d printer
Creality 3D PEI Magnetic Flexible Heated Bed 235 * 235mm Spring Steel Build Surface for Ender-3/pro/Ender-5
  • Creality flexible and removable PEI magnetic bed can stick to magnetics very well. This spring steel sheet has high strength and heat resistance. Suitable for pla, abs, peek and any other filaments.
  • Filaments stick easily onto the surface of this build surface, easy to take off prints from upgraded magnetic flexible build surface and easy to clean up it.
  • The PEI build surface has a smooth surface. The first layer will smooth like the glass bed.
  • Just let everything cool down remove the steel plate and gently flex/ bend/ twist and off it pops.
  • Size: 235 * 235 mm, works for ender3/ ender 3 pro/ ender 5 or any other printers with same printing size.
Latest Pei sheet 3d printer
Latest Pei sheet 3d printer
HAWKUNG PEI Sheet 11.8" x 11.8"(300x300mm) 0.3mm Thick 3D Printing Build Surface with 3M 468MP Adhesive Build Platform Hot Bed Sticker Compatible with Creality CR-10S CR-10 Ender 3 Anet E12 Anet A8
  • This kind of PEI sheet is 3M 468MP tape pre-applied, which means you have no need to apply the 3M tape on the sheet anymore, and no slurry, or adhesive.It is especially convenient to use.
  • ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down.
  • Compared with other ordinary hot bed stickers, PEI sheet hot bed stickers are more resistant to high temperatures, more durable, and are not easily scratched.The bottom of the model printed on the PEI sheet is smoother and the model is easier to take out.
  • Easily clear the PEI sheet surface with a quick wide done with isopropyl alcohol, methyl alcohol, or soap for next use.Optionally, light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life.
  • Suitable material: ABS, PLA, PVC, NYLON, PCL, TPU, TPE, etc.
Latest Pei sheet 3d printer
Toaiot Spring Steel Build Plate for CR-10 10S Pro CR-X MP Maker Pro 3D Printer 3D Printing Sheet Bed Steel Plate 310x310mm/ 12.2x12.2 inch with PEI + Magnetic Sticker B Surface Printing Hotbed Parts
  • Upgrade 3D Printer hotbed surface to make your print easy to adhere to the printing surface, flexible, removable,Note: We have helped you paste PEI on the steel plate, you don’t need to worry about bubbles anymore,
  • Size: 310*310mm/ 12.2*12.2 inch, PEI Size:305mm,for CR-10 10S Pro CR-X MP Maker Pro.
  • Our magnetis and films have all been formulated to resist over 130¡æ / 226F so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.Compatible with PLA ABS PETG TPU and other most filaments
  • Simply adhere a PEI to the top of the FlexPlate, attach to your print bed via the Magnetic Mounting Base, perform a one-time z-height adjustment, and begin printing. When printing is complete, simply remove the FlexPlate, flex, and pop your prints off!
  • After-sales service: If you encounter any defective products, we will provide you with a replacement or refund for free, if you encounter technical problems,Please contact us,We will do our best to help you!
Latest Pei sheet 3d printer
Toaiot 3D Printer 310x310mm/12.2x12.2 inch Gold Double Sided Textured PEI Powder Coated Spring Steel Build Plate Steel Sheet with Magnetic Platform Side B for CR10 CR10S
  • Newly upgraded PEI coated steel plate,gift:Magnetic Platform Side B.
  • Size: 310mm x 310mm/12.2x12.2 inch,With CR10 CR10S Compatible.
  • It's spring steel sheet and PEI 2 in 1 item, made of high strength spring steel sheet with pei powder coat. No more PEI sheet replacement, no more 3M masking tape, no more abs juice, no more glue stick.
  • Easy to install, easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc.
  • If you want to replace the magnetic B-base, look for this ASIN: B08FY9LR2G in our "liying" shop.
Latest Pei sheet 3d printer
UEETEK 3D Printing Build Surface 3D Printer Plate for Heated Bed 300mm x 300mm (Square) - 3 Pieces
  • 3D Printing Build Surface sticks to the 3D printer platforms and improves the molding accuracy of the filament.
  • Build sheet adheres to a print bed to help the filament stick during printing and print without warping.
  • Compatible with ABS, PLA, HIPS, PETG, TPE, nylon, PC and so on. Allow to print surface without additional adhesives or tape.
  • Build sheet adheres to a print bed or heatbed to help the filament stick during printing and easy to clean and remove the printed part after that.
  • Color: Black. Material: Composite material. Size: About 300mm x 300mm/11.8 x 11.8 inch.
Latest Pei sheet 3d printer
Toaiot Spring Steel Build Plate Round Dia 265X265mm/10.4x10.4 inch Steel Sheet Heat Bed for Flsun QQ-S Delta 3D Printer with PEI + Magnetic Sticker B Surface Printing Hotbed Parts
  • Upgrade 3D Printer hotbed surface to make your print easy to adhere to the printing surface, flexible, removable,Note: We have helped you paste PEI on the steel plate, you don’t need to worry about bubbles anymore,
  • Size: 265*265mm/ 10.4*10.4 inch, for Flsun QQ-S Delta。
  • Our magnetis and films have all been formulated to resist over 130°C / 226F so you can heat your bed to high temps for specialty filaments and not worry about loss of performance.Compatible with PLA ABS PETG TPU and other most filaments
  • Simply adhere a PEI to the top of the FlexPlate, attach to your print bed via the Magnetic Mounting Base, perform a one-time z-height adjustment, and begin printing. When printing is complete, simply remove the FlexPlate, flex, and pop your prints off!
  • If you need 220x220mm round steel plate suitable for Flsun Q5, please search for ASIN:B08JPGVPH4 .If you want to buy other size, feel free to send us a message, We will do our best to help you

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Pei sheet 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Pei sheet 3d printer which are among the cheapest on the market. Just scroll through the list to find Pei sheet 3d printer the cheapest products.

Catalog

The product Pei sheet 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.

Pei sheet 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Pei sheet 3d printer New
Printing Plate 3D Printer Pack of 3 Surface Plate Sticker Table Heating Bed Replacement Tape 235 x 235 mm Reusable Adhesive Surface Plate for 3D Printers
  • Excellent compatibility: the PLA 3D printing surface replacement adhesive is an excellent printing material and compatible with ABS, PLA, HIPS, PET, glass, etc.
  • Durable and reusable: the surface adhesive of the 3D printer can be reused many times and prints without deformation, neat and tidy. The special coating is inorganic and has a hardness of 8 Mohs, it can also work 80 °C - 100 °C.
  • Easy to install and excellent adhesion: the single sheet design and the 3D printer sticker can be quickly attached to your 3D model. A 3 metre sticker on the back is once installed and calibrated. This surface of the plate is covered with a coating of micropores that allow a strong adhesion of the pressure. Printed patterns can be easily removed by hand.
  • Easy to clean: the sheet can be cleanly removed from the platform. If it remains stained, it can also be cleaned very easily with a dispersing agent or alcohol. This heated bed plate can be easily cleaned with a cloth soaked in alcohol.
  • Size and application: 235 x 235 mm (9.25 x 9.25 inches); suitable for Creality Ender 3, Ender 3 Pro, Creality CR-20, Ender 5, Tevo Flash, Geeetech A10 and A10M, Robo R1.
Pei sheet 3d printer New
humorous Spring Steel Build Plate Spring Steel Build Plate For 3D Printer Flexible Build System For Resin 3D Printer Spring Sheet Bed Steel Plate Printer Accessories 135X80mm
  • Never Scratch Again: Just bend the printing plate after finishing printing, and then remove the part immediately.
  • The special surface treatment makes the printed parts better adsorb on the panel.
  • High-quality Materials: Made of high-quality spring steel and adhesive. Spring steel with high chromium content can prevent rust for life.
  • Handle design, easy to take and install, etched on both sides, large part adhesion, easy to lift.
  • Applicable Models: For Photon/s, for Photon mono/SE, for Shadow5 .5s.
Pei sheet 3d printer New
PEI Film Polypropylene Build Plates for 3D Printer Platform Easy to Remove Good Adhesive (235 * 235mm)
  • PEI sheets can provide 3D printed build surfaces that do not require tape, paste or adhesives. High strength and heat resistance allows the polymer to perform consistently in high temperature environments.
  • Both ABS and PLA adhere very firmly to the surface, eliminating the need for a support raft for better adhesion. The long‑term temperature is 120 degrees celsius.
  • Adhesive has been pre‑applied to PEI; just peel off the tape liner to quickly adhere to the bed
  • PEI is the perfect unprepared construction surface, which can be reused indefinitely for multiple printing; clean with isopropyl alcohol between printing or clean with acetone on the cold bed
  • When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
Pei sheet 3d printer New
PEI Film Polypropylene Build Plates for 3D Printer Platform Easy to Remove Good Adhesive (310 * 310)
  • PEI sheets can provide 3D printed build surfaces that do not require tape, paste or adhesives. High strength and heat resistance allows the polymer to perform consistently in high temperature environments.
  • Both ABS and PLA adhere very firmly to the surface, eliminating the need for a support raft for better adhesion. The long‑term temperature is 120 degrees celsius.
  • Adhesive has been pre‑applied to PEI; just peel off the tape liner to quickly adhere to the bed
  • PEI is the perfect unprepared construction surface, which can be reused indefinitely for multiple printing; clean with isopropyl alcohol between printing or clean with acetone on the cold bed
  • When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
Pei sheet 3d printer New
BCZAMD Prusa Mini Upgrade Parts Spring Steel Sheet Double Sided Textured PEI Powder Coated Construction Board for Prusa Mini Headbed Surface, 196.3 x 190 mm Gold 7.7 x 7.4 Inches
  • This product is the double-sided textured PEI powder-coated spring steel sheet for the original Prusa Mini heat bed.
  • Easy to remove plastic parts by bending and jumping when cooling, easy to print, easy to maintain.
  • Size: 196.3 x 190 mm / 7.7 x 7.4 inches, thickness: approx. 0.8 mm / 0.03 inches.
  • If you have any problems with this item, please email us with your order number. We will do our best to help you.
  • Compatible with most filaments such as PETG ABS TPU wood etc.
Pei sheet 3d printer New
Odoukey 3d Printer Bedstead Construction Panel Pei Spring Powder Coated Steel Plate Double Side Texture Compatible with Prusa I3
  • MATERIAL: Double sided 3D printer print bed is made of high-strength spring steel sheet with PEI powder coating
  • EASY TO USE: 3D printer print bed is easy to remove by bending and popping it off; No more masking tape and glue stick
  • EASY TO CARE: No more PEI sheet replacement, no more adhesive tape, no more abs juice
  • UNIVERSAL: 3D printer printing plate is compatible with Anet A8 A6 Wanhao I3 Creality Ender 5, Pulse printer with FlexPlate installation, Similar bed size printer with Magnetic Base
  • LOW COST: 3D printer printing plate lowers runing cost especially for printing farm
Pei sheet 3d printer New
IPOTCH Heated Warm Bed Heated Bed Platform for Creality CR 10S Printer 300 X 300 Mm
  • Our magnets and films have all been formulated to resist over 130¡æ / 226F so you can your bed to high temps for specialty filaments and not worry about loss of performance.
  • Simply remove the hot bed Plate from the hot bed Plate Base on your 3D printer when the print is finished.
  • Flexible Heated Bed is compatible for Creality CR-10S, JG Aurora A5 and A5x, Geeetech A30, Folger FT-5, Tevo Black Widow and , Anet E12, TronXY X3s and X5SA, , Alfawise U20, Wanhao Duplicator 9, RAISCUBE T8 Lulzbot Taz 6, Hictop CR-10 and more 3D printer
  • Custom designed PEI materials to make your print easy to adhere to the printing surface.
  • Custom designed high quality Spring Steel, flexible and can be adsorption by base.
Pei sheet 3d printer New
RONGW JKUNYU Gold 235x235mm Double Texture PEI Sheet Powder Steel Plate with 6 Magnetic Block for 3D Printer 3D printer parts
  • Lower runing cost especially for printing farm.
  • Easy to maintain.
  • Easy to print.
  • Easy to remove by bending and popping it off.
  • Double-sided.
Pei sheet 3d printer New
L-Yune,bolt 1pc MIC-6 Aluminum Z Build Plate Kit 110/220V Silicone AC Heater Pad PEI 3M Sheet Kit For VORON 2.4 3d Printer DIY Parts (Color : 110V, Size : 350mm build)
  • MIC-6 aluminum Plate is drilled and counterbored for M3 socket head cap screws
  • Plate has holes tapped for M3 on the bottom side that can be used for thermal fuse attachment and grounding.
  • Precisely drilled on drill press using counterbore bit110/220V Silicone AC heater has a built-in NTC 100K thermistor.
  • Heater and PEI sheet have 3m adhesive pre-applied. Parts are not glued together. Assembly is required.Includes mounting hardware.
  • Work with VORON 2.4 version.

Where to buy?

If you are asking yourself where to buy Pei sheet 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Pei sheet 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Pei sheet 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Pei sheet 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Pei sheet 3d printer used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Pei sheet 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

Printing Plate 3D Printer Pack of 3 Surface Plate Sticker Table Heating Bed Replacement Tape 235 x 235 mm Reusable Adhesive Surface Plate for 3D Printers
  • Excellent compatibility: the PLA 3D printing surface replacement adhesive is an excellent printing material and compatible with ABS, PLA, HIPS, PET, glass, etc.
  • Durable and reusable: the surface adhesive of the 3D printer can be reused many times and prints without deformation, neat and tidy. The special coating is inorganic and has a hardness of 8 Mohs, it can also work 80 °C - 100 °C.
  • Easy to install and excellent adhesion: the single sheet design and the 3D printer sticker can be quickly attached to your 3D model. A 3 metre sticker on the back is once installed and calibrated. This surface of the plate is covered with a coating of micropores that allow a strong adhesion of the pressure. Printed patterns can be easily removed by hand.
  • Easy to clean: the sheet can be cleanly removed from the platform. If it remains stained, it can also be cleaned very easily with a dispersing agent or alcohol. This heated bed plate can be easily cleaned with a cloth soaked in alcohol.
  • Size and application: 235 x 235 mm (9.25 x 9.25 inches); suitable for Creality Ender 3, Ender 3 Pro, Creality CR-20, Ender 5, Tevo Flash, Geeetech A10 and A10M, Robo R1.
BCZAMD Prusa Mini Upgrade Parts Spring Steel Sheet Double Sided Textured PEI Powder Coated Construction Board for Prusa Mini Headbed Surface, 196.3 x 190 mm Gold 7.7 x 7.4 Inches
  • This product is the double-sided textured PEI powder-coated spring steel sheet for the original Prusa Mini heat bed.
  • Easy to remove plastic parts by bending and jumping when cooling, easy to print, easy to maintain.
  • Size: 196.3 x 190 mm / 7.7 x 7.4 inches, thickness: approx. 0.8 mm / 0.03 inches.
  • If you have any problems with this item, please email us with your order number. We will do our best to help you.
  • Compatible with most filaments such as PETG ABS TPU wood etc.
IPOTCH Heated Warm Bed Heated Bed Platform for Creality CR 10S Printer 300 X 300 Mm
  • Our magnets and films have all been formulated to resist over 130¡æ / 226F so you can your bed to high temps for specialty filaments and not worry about loss of performance.
  • Simply remove the hot bed Plate from the hot bed Plate Base on your 3D printer when the print is finished.
  • Flexible Heated Bed is compatible for Creality CR-10S, JG Aurora A5 and A5x, Geeetech A30, Folger FT-5, Tevo Black Widow and , Anet E12, TronXY X3s and X5SA, , Alfawise U20, Wanhao Duplicator 9, RAISCUBE T8 Lulzbot Taz 6, Hictop CR-10 and more 3D printer
  • Custom designed PEI materials to make your print easy to adhere to the printing surface.
  • Custom designed high quality Spring Steel, flexible and can be adsorption by base.
RONGW JKUNYU Gold 235x235mm Double Texture PEI Sheet Powder Steel Plate with 6 Magnetic Block for 3D Printer 3D printer parts
  • Lower runing cost especially for printing farm.
  • Easy to maintain.
  • Easy to print.
  • Easy to remove by bending and popping it off.
  • Double-sided.
L-Yune,bolt 1pc MIC-6 Aluminum Z Build Plate Kit 110/220V Silicone AC Heater Pad PEI 3M Sheet Kit For VORON 2.4 3d Printer DIY Parts (Color : 110V, Size : 350mm build)
  • MIC-6 aluminum Plate is drilled and counterbored for M3 socket head cap screws
  • Plate has holes tapped for M3 on the bottom side that can be used for thermal fuse attachment and grounding.
  • Precisely drilled on drill press using counterbore bit110/220V Silicone AC heater has a built-in NTC 100K thermistor.
  • Heater and PEI sheet have 3m adhesive pre-applied. Parts are not glued together. Assembly is required.Includes mounting hardware.
  • Work with VORON 2.4 version.

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Pei sheet 3d printer.

Rating: 3.67 of 5 - 15 votes
1 Star2 Stars3 Stars4 Stars5 Stars (15 votes, average: 3.67 out of 5)
Loading...