Optomec 3d printer Reviews and Best Deals

Online product reviews and comparisons for Optomec 3d printer.

Latest Optomec 3d printer
NOVA3D BENE4 Mono 3D Printer Free Leveling Resin 3D Printer 130 * 80 * 150 mm LCD/SLA 3D printer with 4.3in touchscreen, offline/WiFi printing
  • 【Longer printing life & Fast printing】 : Bene4 mono Equipped with 2560*1620 6.08in monochrome screen, UV light transmittance improved by 3.9% comparing with original Bene4. Lower LCD Temperature,Extend service life by about 2.5 times compared with the color screen, and the normal use time can reach 2000 hours. Meanwhile, the printing speed is increased by 2 times compared to all the color screen resin printer, and the printing time is 50% decreased. Which greatly saved your time .
  • 【Free leveling & Stability】 : Similarly, we continued the leveling-free design, this design is loved by the majority of users. Not only does it eliminate the trouble of leveling that has been criticized by others, but it is also easy to use, even a beginner can print a perfect model.NOVA3D Bene4 mono LCD printer with full-metal body to improve machine quality and enhance printing stability.
  • 【Light intensity improved】:We increased the intensity of the light source, comparing with the original Bene4 the light intensity is approximately twice as much as the original. the original’s light intensity is around 1700uW/cm², Bene4 MONO is around 3500uW/cm².This means that the exposure time is greatly shortened.
  • Dual Slicing Software & Wi-Fi Printing: NOVA3D cooperate with LycheeSlicer to help you slicing your models more professionally. And NOVAMAKE can still be used to transfer files to the printer via Wi-Fi.
  • 【Multiple Connection & Quiet Working】 Offline printing,Wireless transmission printing,Wi-fi printing, we have multiple connections for you to choose from , so you can print it anytime, anywhere. When Bene4 mono is working ,there is less noise. Even you can print at night.
Latest Optomec 3d printer
ANYCUBIC Photon Mono X 3D Printer, UV LCD Resin Printer with 8.9" 4K Monochrome Screen, WiFi Control and Fast Printing, Printing Size 192mmx120mmx250mm / 7.55inx4.72inx9.84in
  • 4K Monochrome Screen: ANYCUBIC Photon Mono X is a new UV Photocuring 3D resin printer with ultra-high resolution (3840*2400 pixels), highly restored details, and the screen service life is up to 2000h, more durable than ordinary color screen
  • 3X Faster Printing: single-layer exposure only takes 1-2 seconds, and the printing speed is Max 60mm/h, which is 3 times faster than ordinary resin printers. Do you want to finish printing faster? This printer help you to obtain higher quality models in a shorter time.
  • APP Remote Control & Large Printing Volume: Use this Mono X UV Photocuring LCD 3D Printer to realize remote printing management anytime and anywhere, monitor printing progress in real time, and adjust printing parameters at any time. In order to achieve the creation needs of larger models, it has a surprising printing volume, and printing volume size 192 * 120 * 250mm.
  • Double Linear Guide: Z-axis adopts the combination of double linear guide + screw motor + anti-backlash nut, improve the stability of Z-axis, run more stable, and eliminate printing layer lines. Independently researched and developed Anycubic slicing software, which is more powerful, supports 8 times anti-aliasing and smoother printing accuracy.
  • New Matrix UV Light Source: Using quartz lamp beads, a new generation of new matrix design, the light source is more uniform, and it can be used with 4K monochrome screen to achieve high-precision printing. The resin 3D printer contains exclusive UV heat dissipation channels, which can efficiently cool down, improve printing quality and service life, and reduce maintenance costs.
Latest Optomec 3d printer
Creality Ender 3 3D Printer, Aluminum DIY Fully Open Source with Resume Printing Function 220x220x250mm
  • E Axis working: The E axis motor will start work when the nozzle temperature reaches over 185℃, then before starting printing, please remember to heat the nozzle temperature first.
  • Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs can be assembled in just 2 hours.
  • Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
  • Strict Test: Strict testing for key components before delivery and life-time technical supports available.
  • Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110℃.
DISCOUNTLatest Optomec 3d printer
OTOTEC All Metal Hotend Kit For CR-10 Series Use 3D Printer
  • [Operating Temperature]: The hotend should not be higher than 300 degree centigrade.
  • [Filament]: Suitable for PLA filament 1.75mm/0.07inch in diameter.
  • [High Quality]: Made of titanium alloy, ultra-low thermal conductivity. Make sure the printer stable operation.
  • [Note]: The temperature of extruder should be set the parameters correctly before use, according to the specifics of your 3D printer.
  • Flexible Friendly Hotend Kit with Heater Block for Creality CR10 Printers metal hotend kit For CR10 printers 1.75mm CR10 3D Printer Titanium Alloy Hotend Extruder Kit For 0.4mm Nozzle
Latest Optomec 3d printer
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Latest Optomec 3d printer
Tooart 3D Printer WiFi Box,Original Creality WiFi Box for 3D Printer Cloud Slice/Cloud Print/Real-Time Monitor/Remote Control Use with APP Compatible with Android iOS for Creality FDM 3D Printer
  • Powerful Performance: Equipped with a high-performance master control chip, the 3D printer is seamlessly connected to the Cloud Server, bringing an efficient transmission experience.
  • Efficient Transmission & Signal Stabilization: Multi-Terminal connection, easy to operate. Quickly transmitting Creality box APP instructions and slice file to 3D Printer wireless, more convenient in wireless 3D print mode.
  • Real-Time Remote Control: After connecting to the Creality Box, the 3D printer can be controlled remotely in real time through the Creality Cloud APP, relevant printing parameters can be set, and the printing can be monitored in real time.
  • Easy to Use: Download the ''Creality Cloud'' APP, then connect the device and internet, click the model library to print. Compatible with Android & iOS and suitable for all Creality FDM 3D printers.
  • Best Parter of 3D Print: There are many printing model files in Creality Cloud APP, covering culture, art, education, industry, medical and others. Together with Creality Box, it becomes a mobile cloud model library.
Latest Optomec 3d printer
KEYESTUDIO 3D Printer Controller RAMPS 1.4 REPRAP MENDEL PRUSA for Arduino Mega
  • It is a Mega Pololu Shield, or RAMPS for short, designed to fit the entire electronics needed for a RepRap in one small package for low cost.
  • RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion.
  • Has provisions for the cartesian robot and extruder.
  • Expandable to control other accessories.
  • 3 mosfets for heater / fan outputs and 3 thermistor circuits.
Latest Optomec 3d printer
ANYCUBIC 3D Printer Plant Based Resin UV 405nm Rapid Photopolymer for LCD/DLP/SLA 3D Printers, 500g White
  • 【Truly eco-friendly】Biodegradable and made from soybean oil, truly eco-friendly. No VOCs, no BPA, no harmful chemicals. Complied with EN 71-3:2013 safety standard. You can print freely and no need to worry about bad smells. Macaroon color series, rich, fresh and vivid.
  • 【Professional LCD molding resin】Optimize the formation of LCD low light source and printing efficiency is higher than the market compatible DLP / LCD / SLA resin. The resin is only designed for the LCD model of the resin, not recommended DLP or SLA machine.
  • 【High-speed solidify】This resin ensures the strength of molded parts and not excessive shrinkage, but also improve print speed, shorten the curing time and enhance the printing efficiency of LCD machines as much as possible.
  • 【Strong adhesion of the model and easy to detach after forming】 Not only high success rate of printing and precision, but also to minimize resin release force and adhesion, so that the model attached to the forming platform can easily shovel and low viscosity makes it easier to clean the machine and model.
  • 【The material is rigid and tough】Strong material in the shovel model can easily lead to the model fragmentation, but too flexible material will be prone to the details of the print tensile deformation or fracture, which will affect the molding accuracy and aesthetics.
Latest Optomec 3d printer
Ld-002r Lcd 3d Printer, Photocuring Quick To Assemble DIY UV Resin 3D Printer Working Kit With Resume Printing Function Give 1 3d Filament As a Gift
  • Semi-assembled kits: Several semi-assembled kits are included, which are very easy to assemble, allowing you to understand the basic structure of the 3D printer.
  • Flying Extruder: Provide precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc.
  • Larger printing size means more printing space. We strive to create 119×65×160mm for you. The molding area can complete larger and more printing tasks at one time, so that your creativity is unlimited.
  • The performance of ball linear slide is more stable:Ball linear slide, high-precision and stable balance sliding improves the stability of Z axis, eliminates wave patterns, smooth model surface, and better detail restoration effect
  • The printer comes with 1 roll of 1KG filament for 3D printer consumables. There are many kinds of filaments for you to choose randomly. If you have any choice, please contact me by email, and I will be at your service at any time

Buy Optomec 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Optomec 3d printer, buy Optomec 3d printer directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Optomec 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


Best
ELEGOO Mars 2 Pro Mono MSLA 3D Printer UV Photocuring LCD Resin 3D Printer with 6 inch 2K Monochrome LCD, Printing Size 129 * 80 * 160mm/5.08 * 3.15 * 6.30inch
  • 【Fast Printing and less maintenance】Mars 2 Pro comes with a 6.08 inch monochrome LCD of 2K HD resolution and only takes 2 seconds per layer exposure to cure resin, which could significantly enhance your printing efficiency. Mono LCD has a much longer lifespan and stable performance during long term printing, thus saves your cost.
  • 【Outstanding prints and ultra accurcy】Brand new light source structure provides more even UV light emission and working together with 2K mono LCD, the printing details and precision are greatly improved and the 3D printed models are fascinating.
  • 【Sturdy build quality】CNC machined aluminum body makes Mars 2 Pro a very formidable machine. Newly-designed sandblasted build plate has a much stronger adherence during printing and enables consistent printing success. Built-in active carbon could absorb the fume of resin and offer you a refreshing printing experience.
  • 【Multi language interface】Mars 2 Pro now supports 12 kinds of languages so customers across the world could operate the 3D printer more conveniently without barries.The newly added 10 languages are Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish and Portuguese.
  • 【Warranty and Service】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded). However, Mars 2 Pro comes with 2 extra FEP films for you to replace the original one.
Best
ANYCUBIC Photon Mono X 3D Printer, UV LCD Resin Printer with 8.9" 4K Monochrome Screen, WiFi Control and Fast Printing, Printing Size 192mmx120mmx250mm / 7.55inx4.72inx9.84in
  • 4K Monochrome Screen: ANYCUBIC Photon Mono X is a new UV Photocuring 3D resin printer with ultra-high resolution (3840*2400 pixels), highly restored details, and the screen service life is up to 2000h, more durable than ordinary color screen
  • 3X Faster Printing: single-layer exposure only takes 1-2 seconds, and the printing speed is Max 60mm/h, which is 3 times faster than ordinary resin printers. Do you want to finish printing faster? This printer help you to obtain higher quality models in a shorter time.
  • APP Remote Control & Large Printing Volume: Use this Mono X UV Photocuring LCD 3D Printer to realize remote printing management anytime and anywhere, monitor printing progress in real time, and adjust printing parameters at any time. In order to achieve the creation needs of larger models, it has a surprising printing volume, and printing volume size 192 * 120 * 250mm.
  • Double Linear Guide: Z-axis adopts the combination of double linear guide + screw motor + anti-backlash nut, improve the stability of Z-axis, run more stable, and eliminate printing layer lines. Independently researched and developed Anycubic slicing software, which is more powerful, supports 8 times anti-aliasing and smoother printing accuracy.
  • New Matrix UV Light Source: Using quartz lamp beads, a new generation of new matrix design, the light source is more uniform, and it can be used with 4K monochrome screen to achieve high-precision printing. The resin 3D printer contains exclusive UV heat dissipation channels, which can efficiently cool down, improve printing quality and service life, and reduce maintenance costs.
Best
ANYCUBIC 3D Printer Mega S All Metal Frame and Updated Extruder, FDM DIY Printer Works, Free Test Filament with TPU/PLA/ABS Printing Size 210x210x205mm
  • Qucik Assembly: 3 steps to set up/assembled the printer with fix 8 screws within minutes not only to an expert user but also to beginner
  • Powerful Extruder: Anycubic mega s updated extruder greatly reduces the risk of clogged nozzle and bad extrusion to provide a better printing experience of flexible
  • Filament Sensor: Automatic printing pause when filament runs out, resume after filament re-load with just one click
  • Ultrabase Platform: 3D printer platform is covered a layer of patented microporous to provide excellent adhesion. And easy to take off the model from the platform after it cool down
  • Suspended Filament Rack: 3D fdm printer One-piece hanging design makes the feeding of filament more smoother, save space and more convenient
Best
ELEGOO Mars 2 Mono MSLA 3D Printer UV Photocuring LCD Resin 3D Printer with 6.08 inch 2K Monochrome LCD, Printing Size 129 * 80 * 150mm / 5.08 * 3.15 * 5.90 inch
  • 【Fast Printing and less maintenance】Mars 2 comes with a 6.08 inch monochrome LCD of 2K HD resolution and only takes 2 seconds per layer exposure to cure resin, which could significantly enhance your printing efficiency. Mono LCD has a much longer lifespan and stable performance during long term printing, thus saves your cost.
  • 【Outstanding prints and ultra accurcy】Brand new light source structure provides more even UV light emission and working together with 2K mono LCD, the printing details and precision are greatly improved and the 3D printed models are fascinating.
  • 【Sturdy build quality】CNC machined aluminum body makes Mars 2 a very formidable machine. Newly-designed sandblasted build plate has a much stronger adherence during printing and enables consistent printing success. Built-in active carbon could absorb the fume of resin and offer you a refreshing printing experience.
  • 【Multi language interface】Mars 2 now supports 12 kinds of languages so customers across the world could operate the 3D printer more conveniently without barries.The newly added 10 languages are Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish and Portuguese.
  • 【Warranty and Service】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded).
Best
BIGTREETECH Spring Steel Build Plate for SLA/DLP 3D printer 135X75MM Flexible Build System for Resin with Magnetic Sticker for Elegoo Mars/Mars Pro, Wanhao D7, Phrozen sonic mini 4k
  • 1) 【Fits Resin Printer】 Elegoo Mars/Mars Pro, Wanhao D7, Phrozen Sonic Mini 4K, MONOPRICE Mini Deluxe SLA.
  • 2) 【Stronger adsorption】 the special wire drawing treatment on the surface of the spring steel plate makes the model better absorb. Spring Steel, easy to Use and flexible, which has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
  • 3) 【Flat, Sturdy and Durable】 The steel plate is made of spring steel imported from the United States, which has good flatness and durability; the soft magnetic sheet is a strong magnetic soft magnetic sheet with strong magnetic force.
  • 4) 【Easily remove the model】 After using the spring steel plate, the model can be removed with a light flick. The traditional DLP printer platform requires the help of tools such as a spatula to take off the model.
  • 5) 【Easy to remove the steel plate】 Ergonomic handle design makes it easier to remove the steel plate from the platform.

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Optomec 3d printer

Here is the ranking of the best Optomec 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Optomec 3d printer and read the reviews left by real customers, see the Optomec 3d printer ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Optomec 3d printer New
Asixxsix Power outlet kit for 3D printer, switch socket, universal commercial home printer for 3D printer
  • U-type plug for easy installation.
  • Universal power switch socket module for 3D printer (NO limitation to models).
  • Comes with a fuse.
  • The lines have been pressed molding with insulated housing.
  • Adopting high quality green environmentally friendly material.
Optomec 3d printer New
3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board
  • It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing.
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing.
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet.
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard.
  • Used with other motherboards: The material detection module uses the level transition detection method. When with material in, the detection level signal should be high, and when no material, the material port level signal goes low. When the system detects a determined transition from high to low level, it will regard it as the material exhausted, then the board executes the pause command operation, and after the replacement of the material, it will continue to print.
Optomec 3d printer New
BIGTREETECH Spring Steel Build Plate for SLA/DLP 3D printer 135X75MM Flexible Build System for Resin with Magnetic Sticker for Elegoo Mars/Mars Pro, Wanhao D7, Phrozen sonic mini 4k
  • 1) 【Fits Resin Printer】 Elegoo Mars/Mars Pro, Wanhao D7, Phrozen Sonic Mini 4K, MONOPRICE Mini Deluxe SLA.
  • 2) 【Stronger adsorption】 the special wire drawing treatment on the surface of the spring steel plate makes the model better absorb. Spring Steel, easy to Use and flexible, which has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
  • 3) 【Flat, Sturdy and Durable】 The steel plate is made of spring steel imported from the United States, which has good flatness and durability; the soft magnetic sheet is a strong magnetic soft magnetic sheet with strong magnetic force.
  • 4) 【Easily remove the model】 After using the spring steel plate, the model can be removed with a light flick. The traditional DLP printer platform requires the help of tools such as a spatula to take off the model.
  • 5) 【Easy to remove the steel plate】 Ergonomic handle design makes it easier to remove the steel plate from the platform.
Optomec 3d printer New
Tooart 3D Printer WiFi Box,Original Creality WiFi Box for 3D Printer Cloud Slice/Cloud Print/Real-Time Monitor/Remote Control Use with APP Compatible with Android iOS for Creality FDM 3D Printer
  • Powerful Performance: Equipped with a high-performance master control chip, the 3D printer is seamlessly connected to the Cloud Server, bringing an efficient transmission experience.
  • Efficient Transmission & Signal Stabilization: Multi-Terminal connection, easy to operate. Quickly transmitting Creality box APP instructions and slice file to 3D Printer wireless, more convenient in wireless 3D print mode.
  • Real-Time Remote Control: After connecting to the Creality Box, the 3D printer can be controlled remotely in real time through the Creality Cloud APP, relevant printing parameters can be set, and the printing can be monitored in real time.
  • Easy to Use: Download the ''Creality Cloud'' APP, then connect the device and internet, click the model library to print. Compatible with Android & iOS and suitable for all Creality FDM 3D printers.
  • Best Parter of 3D Print: There are many printing model files in Creality Cloud APP, covering culture, art, education, industry, medical and others. Together with Creality Box, it becomes a mobile cloud model library.
Optomec 3d printer New
ELEGOO Mars Pro 3D Printer, MSLA UV Photocuring LCD Resin Printer with Activated Carbon Front USB Port 3.5in Touch Screen, Matrix UV LED Light Source 115x65x150mm Printing Size
  • 【What's PRO than Mars? 】BGW15CA Linear guideway with accuracy of 0.02mm, smoother, quieter and more stable. 50w Matrix LED UV light source offer more uniform light emission, curing time lower to 6s per layer. Built-in Activated Carbon Filter, additional cover rubber sealing, no need to worry about the odor of resin
  • 【Convenient and Easy to Use】The build plate has changed to CNC turning CD pattern, which provides stronger adhesion when printing. The improved translucent resin vat is lighter. The USB port has changed to front from back, it is more convenient to plug the flash drive. Mars Pro also refactored user interface with dark background and simulant icons
  • 【Add Air Filter System】Mars Pro add a rubber sealing to the upper cover to prevent the resin odor from out of the cover. The built-in activated carbon filter can absorb and eliminate odor, so there is no need to worry about resin odor during printing
  • 【Better Printing Quality】Thanks to the upgraded Matrix 28 50W UV LED light source,the uniformity of light is increased to 95%. It means more accurate print size, layer exposure time is also reduced to 6 seconds. Mars 2 support .ctb format, smaller files but greatly increase the success rate of printing of bigger models
  • 【MSLA Technology】Digital mask controls which regions of the print area are illuminated by a panel light source array. This allows every object on the built plate to be photocured simultaneously. It means an ELEGOO Mars Pro printer can print 2 and more models as quickly as one. Mars Pro MSLA printer are much faster than SLA or DLP printers
Optomec 3d printer New
ANYCUBIC Photon Mono 3D Printer, UV LCD Resin 3D Printer Fast Printing with 6.08'' 2K Monochrome LCD, Off-line Print 5.11"(L) x 3.14"(W) x 6.49"(H) Printing Size
  • Faster Printing Resin 3d Printer, Photon Mono printing speed is 2.5X faster than the regular 3d printers, rapid prototyping greatly improved printing efficiency and saved more time, comes with a 6.08'' 2K Monochrome LCD and only takes 1.5 seconds per layer exposure to cure resin, whose service life is 4 times that of RGB LCD screen, save material and costs too
  • High Precision And Strong Stability, ANYCUBIC LCD screen Adopts matrix parallel light source, is able to carry out uniform exposure, improve the quality of models, Z-axis guide rail structure and stepper motor have better stability, with an accuracy of 0.01mm, it effectively eliminating layer patterns, It's a great 3D printer for printing games, movies, cartoon characters, miniatures, etc
  • Outstanding Prints And Easy To Use, Off-line printing function with size 5.11"(L) x 3.14"(W) x 6.49"(H) / 130 x 80 x165MM, Photon Mono resin 3d printer uses a removable one-piece transparent cover to make the internal space of the machine, and the printer can be set to stop printing immediately after opening the cover, which is convenient to operate and see the printing process, Friendly use for beginners and good performance for the enthusiasts
  • Outstanding Workshop, The transparent cover blocks up to 99.95% of ultraviolet rays with a wavelength of 405nm, can be effective high resin solidification rate and ensure your success printing, reduce wasting of resin, New photon mono uses One-piece FEP, which can be easier and quicker to replace
  • After Sale Service, All of our 3d printers provide one month free return and exchange, one year warranty (exclude consumable parts like LCD screen & FEP film) and lifetime technical support, If you encounter any problems, please feel free contact us
Optomec 3d printer New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Optomec 3d printer New
SHENLIJUAN 3D Printer CR-10 V3 With BL Touch Auto-Level Touch Screen Large Build Volume 3D Printer 300mmx300mmx400mm With Capricorn PTFE 2020 Newest Printer
  • Strong Compatibility Auto & Manual Leveling:BL touch (Auto Leveling Device) can be added by yourself,enjoying more fun of DIY your own 3d printer.
  • Dual Port Fan Cooling Plenum:Dual-port cooling fan extruder, Evenly heat- dissipated and coaling dawn immediately. reducing plugging and poor- spillage ensures models with high quality.
  • A New Tough All Metal Frame: High quality V Profile selected, more stable without any vibration,smoothly printed-out with high accuracy.
  • Upgraded Ultra Silent Mother Board: Self-developed Industrial-grade Motherboard and TMC2208 Utra Silent Drive are adopted /Cost-effective /Running more stable/ Noise reduction /Compression resistance.
Optomec 3d printer New
ANYCUBIC Photon Mono X 3D Printer, UV LCD Resin Printer with 8.9" 4K Monochrome Screen, WiFi Control and Fast Printing, Printing Size 192mmx120mmx250mm / 7.55inx4.72inx9.84in
  • 4K Monochrome Screen: ANYCUBIC Photon Mono X is a new UV Photocuring 3D resin printer with ultra-high resolution (3840*2400 pixels), highly restored details, and the screen service life is up to 2000h, more durable than ordinary color screen
  • 3X Faster Printing: single-layer exposure only takes 1-2 seconds, and the printing speed is Max 60mm/h, which is 3 times faster than ordinary resin printers. Do you want to finish printing faster? This printer help you to obtain higher quality models in a shorter time.
  • APP Remote Control & Large Printing Volume: Use this Mono X UV Photocuring LCD 3D Printer to realize remote printing management anytime and anywhere, monitor printing progress in real time, and adjust printing parameters at any time. In order to achieve the creation needs of larger models, it has a surprising printing volume, and printing volume size 192 * 120 * 250mm.
  • Double Linear Guide: Z-axis adopts the combination of double linear guide + screw motor + anti-backlash nut, improve the stability of Z-axis, run more stable, and eliminate printing layer lines. Independently researched and developed Anycubic slicing software, which is more powerful, supports 8 times anti-aliasing and smoother printing accuracy.
  • New Matrix UV Light Source: Using quartz lamp beads, a new generation of new matrix design, the light source is more uniform, and it can be used with 4K monochrome screen to achieve high-precision printing. The resin 3D printer contains exclusive UV heat dissipation channels, which can efficiently cool down, improve printing quality and service life, and reduce maintenance costs.

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Optomec 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Optomec 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

ANYCUBIC Photon Mono X 3D Printer, UV LCD Resin Printer with 8.9" 4K Monochrome Screen, WiFi Control and Fast Printing, Printing Size 192mmx120mmx250mm / 7.55inx4.72inx9.84in
  • 4K Monochrome Screen: ANYCUBIC Photon Mono X is a new UV Photocuring 3D resin printer with ultra-high resolution (3840*2400 pixels), highly restored details, and the screen service life is up to 2000h, more durable than ordinary color screen
  • 3X Faster Printing: single-layer exposure only takes 1-2 seconds, and the printing speed is Max 60mm/h, which is 3 times faster than ordinary resin printers. Do you want to finish printing faster? This printer help you to obtain higher quality models in a shorter time.
  • APP Remote Control & Large Printing Volume: Use this Mono X UV Photocuring LCD 3D Printer to realize remote printing management anytime and anywhere, monitor printing progress in real time, and adjust printing parameters at any time. In order to achieve the creation needs of larger models, it has a surprising printing volume, and printing volume size 192 * 120 * 250mm.
  • Double Linear Guide: Z-axis adopts the combination of double linear guide + screw motor + anti-backlash nut, improve the stability of Z-axis, run more stable, and eliminate printing layer lines. Independently researched and developed Anycubic slicing software, which is more powerful, supports 8 times anti-aliasing and smoother printing accuracy.
  • New Matrix UV Light Source: Using quartz lamp beads, a new generation of new matrix design, the light source is more uniform, and it can be used with 4K monochrome screen to achieve high-precision printing. The resin 3D printer contains exclusive UV heat dissipation channels, which can efficiently cool down, improve printing quality and service life, and reduce maintenance costs.
3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board
  • It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing.
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing.
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet.
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard.
  • Used with other motherboards: The material detection module uses the level transition detection method. When with material in, the detection level signal should be high, and when no material, the material port level signal goes low. When the system detects a determined transition from high to low level, it will regard it as the material exhausted, then the board executes the pause command operation, and after the replacement of the material, it will continue to print.
Asixxsix Power outlet kit for 3D printer, switch socket, universal commercial home printer for 3D printer
  • U-type plug for easy installation.
  • Universal power switch socket module for 3D printer (NO limitation to models).
  • Comes with a fuse.
  • The lines have been pressed molding with insulated housing.
  • Adopting high quality green environmentally friendly material.
BIGTREETECH Spring Steel Build Plate for SLA/DLP 3D printer 135X75MM Flexible Build System for Resin with Magnetic Sticker for Elegoo Mars/Mars Pro, Wanhao D7, Phrozen sonic mini 4k
  • 1) 【Fits Resin Printer】 Elegoo Mars/Mars Pro, Wanhao D7, Phrozen Sonic Mini 4K, MONOPRICE Mini Deluxe SLA.
  • 2) 【Stronger adsorption】 the special wire drawing treatment on the surface of the spring steel plate makes the model better absorb. Spring Steel, easy to Use and flexible, which has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
  • 3) 【Flat, Sturdy and Durable】 The steel plate is made of spring steel imported from the United States, which has good flatness and durability; the soft magnetic sheet is a strong magnetic soft magnetic sheet with strong magnetic force.
  • 4) 【Easily remove the model】 After using the spring steel plate, the model can be removed with a light flick. The traditional DLP printer platform requires the help of tools such as a spatula to take off the model.
  • 5) 【Easy to remove the steel plate】 Ergonomic handle design makes it easier to remove the steel plate from the platform.
SHENLIJUAN 3D Printer CR-10 V3 With BL Touch Auto-Level Touch Screen Large Build Volume 3D Printer 300mmx300mmx400mm With Capricorn PTFE 2020 Newest Printer
  • Strong Compatibility Auto & Manual Leveling:BL touch (Auto Leveling Device) can be added by yourself,enjoying more fun of DIY your own 3d printer.
  • Dual Port Fan Cooling Plenum:Dual-port cooling fan extruder, Evenly heat- dissipated and coaling dawn immediately. reducing plugging and poor- spillage ensures models with high quality.
  • A New Tough All Metal Frame: High quality V Profile selected, more stable without any vibration,smoothly printed-out with high accuracy.
  • Upgraded Ultra Silent Mother Board: Self-developed Industrial-grade Motherboard and TMC2208 Utra Silent Drive are adopted /Cost-effective /Running more stable/ Noise reduction /Compression resistance.

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Optomec 3d printer actually costs.

Latest Optomec 3d printer
NOVA3D BENE4 Mono 3D Printer Free Leveling Resin 3D Printer 130 * 80 * 150 mm LCD/SLA 3D printer with 4.3in touchscreen, offline/WiFi printing
  • 【Longer printing life & Fast printing】 : Bene4 mono Equipped with 2560*1620 6.08in monochrome screen, UV light transmittance improved by 3.9% comparing with original Bene4. Lower LCD Temperature,Extend service life by about 2.5 times compared with the color screen, and the normal use time can reach 2000 hours. Meanwhile, the printing speed is increased by 2 times compared to all the color screen resin printer, and the printing time is 50% decreased. Which greatly saved your time .
  • 【Free leveling & Stability】 : Similarly, we continued the leveling-free design, this design is loved by the majority of users. Not only does it eliminate the trouble of leveling that has been criticized by others, but it is also easy to use, even a beginner can print a perfect model.NOVA3D Bene4 mono LCD printer with full-metal body to improve machine quality and enhance printing stability.
  • 【Light intensity improved】:We increased the intensity of the light source, comparing with the original Bene4 the light intensity is approximately twice as much as the original. the original’s light intensity is around 1700uW/cm², Bene4 MONO is around 3500uW/cm².This means that the exposure time is greatly shortened.
  • Dual Slicing Software & Wi-Fi Printing: NOVA3D cooperate with LycheeSlicer to help you slicing your models more professionally. And NOVAMAKE can still be used to transfer files to the printer via Wi-Fi.
  • 【Multiple Connection & Quiet Working】 Offline printing,Wireless transmission printing,Wi-fi printing, we have multiple connections for you to choose from , so you can print it anytime, anywhere. When Bene4 mono is working ,there is less noise. Even you can print at night.
Latest Optomec 3d printer
ANYCUBIC Photon Mono X 3D Printer, UV LCD Resin Printer with 8.9" 4K Monochrome Screen, WiFi Control and Fast Printing, Printing Size 192mmx120mmx250mm / 7.55inx4.72inx9.84in
  • 4K Monochrome Screen: ANYCUBIC Photon Mono X is a new UV Photocuring 3D resin printer with ultra-high resolution (3840*2400 pixels), highly restored details, and the screen service life is up to 2000h, more durable than ordinary color screen
  • 3X Faster Printing: single-layer exposure only takes 1-2 seconds, and the printing speed is Max 60mm/h, which is 3 times faster than ordinary resin printers. Do you want to finish printing faster? This printer help you to obtain higher quality models in a shorter time.
  • APP Remote Control & Large Printing Volume: Use this Mono X UV Photocuring LCD 3D Printer to realize remote printing management anytime and anywhere, monitor printing progress in real time, and adjust printing parameters at any time. In order to achieve the creation needs of larger models, it has a surprising printing volume, and printing volume size 192 * 120 * 250mm.
  • Double Linear Guide: Z-axis adopts the combination of double linear guide + screw motor + anti-backlash nut, improve the stability of Z-axis, run more stable, and eliminate printing layer lines. Independently researched and developed Anycubic slicing software, which is more powerful, supports 8 times anti-aliasing and smoother printing accuracy.
  • New Matrix UV Light Source: Using quartz lamp beads, a new generation of new matrix design, the light source is more uniform, and it can be used with 4K monochrome screen to achieve high-precision printing. The resin 3D printer contains exclusive UV heat dissipation channels, which can efficiently cool down, improve printing quality and service life, and reduce maintenance costs.
Latest Optomec 3d printer
Creality Ender 3 3D Printer, Aluminum DIY Fully Open Source with Resume Printing Function 220x220x250mm
  • E Axis working: The E axis motor will start work when the nozzle temperature reaches over 185℃, then before starting printing, please remember to heat the nozzle temperature first.
  • Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs can be assembled in just 2 hours.
  • Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
  • Strict Test: Strict testing for key components before delivery and life-time technical supports available.
  • Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110℃.
DISCOUNTLatest Optomec 3d printer
OTOTEC All Metal Hotend Kit For CR-10 Series Use 3D Printer
  • [Operating Temperature]: The hotend should not be higher than 300 degree centigrade.
  • [Filament]: Suitable for PLA filament 1.75mm/0.07inch in diameter.
  • [High Quality]: Made of titanium alloy, ultra-low thermal conductivity. Make sure the printer stable operation.
  • [Note]: The temperature of extruder should be set the parameters correctly before use, according to the specifics of your 3D printer.
  • Flexible Friendly Hotend Kit with Heater Block for Creality CR10 Printers metal hotend kit For CR10 printers 1.75mm CR10 3D Printer Titanium Alloy Hotend Extruder Kit For 0.4mm Nozzle
Latest Optomec 3d printer
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Latest Optomec 3d printer
Tooart 3D Printer WiFi Box,Original Creality WiFi Box for 3D Printer Cloud Slice/Cloud Print/Real-Time Monitor/Remote Control Use with APP Compatible with Android iOS for Creality FDM 3D Printer
  • Powerful Performance: Equipped with a high-performance master control chip, the 3D printer is seamlessly connected to the Cloud Server, bringing an efficient transmission experience.
  • Efficient Transmission & Signal Stabilization: Multi-Terminal connection, easy to operate. Quickly transmitting Creality box APP instructions and slice file to 3D Printer wireless, more convenient in wireless 3D print mode.
  • Real-Time Remote Control: After connecting to the Creality Box, the 3D printer can be controlled remotely in real time through the Creality Cloud APP, relevant printing parameters can be set, and the printing can be monitored in real time.
  • Easy to Use: Download the ''Creality Cloud'' APP, then connect the device and internet, click the model library to print. Compatible with Android & iOS and suitable for all Creality FDM 3D printers.
  • Best Parter of 3D Print: There are many printing model files in Creality Cloud APP, covering culture, art, education, industry, medical and others. Together with Creality Box, it becomes a mobile cloud model library.
Latest Optomec 3d printer
KEYESTUDIO 3D Printer Controller RAMPS 1.4 REPRAP MENDEL PRUSA for Arduino Mega
  • It is a Mega Pololu Shield, or RAMPS for short, designed to fit the entire electronics needed for a RepRap in one small package for low cost.
  • RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion.
  • Has provisions for the cartesian robot and extruder.
  • Expandable to control other accessories.
  • 3 mosfets for heater / fan outputs and 3 thermistor circuits.
Latest Optomec 3d printer
ANYCUBIC 3D Printer Plant Based Resin UV 405nm Rapid Photopolymer for LCD/DLP/SLA 3D Printers, 500g White
  • 【Truly eco-friendly】Biodegradable and made from soybean oil, truly eco-friendly. No VOCs, no BPA, no harmful chemicals. Complied with EN 71-3:2013 safety standard. You can print freely and no need to worry about bad smells. Macaroon color series, rich, fresh and vivid.
  • 【Professional LCD molding resin】Optimize the formation of LCD low light source and printing efficiency is higher than the market compatible DLP / LCD / SLA resin. The resin is only designed for the LCD model of the resin, not recommended DLP or SLA machine.
  • 【High-speed solidify】This resin ensures the strength of molded parts and not excessive shrinkage, but also improve print speed, shorten the curing time and enhance the printing efficiency of LCD machines as much as possible.
  • 【Strong adhesion of the model and easy to detach after forming】 Not only high success rate of printing and precision, but also to minimize resin release force and adhesion, so that the model attached to the forming platform can easily shovel and low viscosity makes it easier to clean the machine and model.
  • 【The material is rigid and tough】Strong material in the shovel model can easily lead to the model fragmentation, but too flexible material will be prone to the details of the print tensile deformation or fracture, which will affect the molding accuracy and aesthetics.
Latest Optomec 3d printer
Ld-002r Lcd 3d Printer, Photocuring Quick To Assemble DIY UV Resin 3D Printer Working Kit With Resume Printing Function Give 1 3d Filament As a Gift
  • Semi-assembled kits: Several semi-assembled kits are included, which are very easy to assemble, allowing you to understand the basic structure of the 3D printer.
  • Flying Extruder: Provide precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc.
  • Larger printing size means more printing space. We strive to create 119×65×160mm for you. The molding area can complete larger and more printing tasks at one time, so that your creativity is unlimited.
  • The performance of ball linear slide is more stable:Ball linear slide, high-precision and stable balance sliding improves the stability of Z axis, eliminates wave patterns, smooth model surface, and better detail restoration effect
  • The printer comes with 1 roll of 1KG filament for 3D printer consumables. There are many kinds of filaments for you to choose randomly. If you have any choice, please contact me by email, and I will be at your service at any time

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Optomec 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Optomec 3d printer which are among the cheapest on the market. Just scroll through the list to find Optomec 3d printer the cheapest products.

Catalog

The product Optomec 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.

Optomec 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Optomec 3d printer New
Asixxsix Power outlet kit for 3D printer, switch socket, universal commercial home printer for 3D printer
  • U-type plug for easy installation.
  • Universal power switch socket module for 3D printer (NO limitation to models).
  • Comes with a fuse.
  • The lines have been pressed molding with insulated housing.
  • Adopting high quality green environmentally friendly material.
Optomec 3d printer New
3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board
  • It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing.
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing.
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet.
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard.
  • Used with other motherboards: The material detection module uses the level transition detection method. When with material in, the detection level signal should be high, and when no material, the material port level signal goes low. When the system detects a determined transition from high to low level, it will regard it as the material exhausted, then the board executes the pause command operation, and after the replacement of the material, it will continue to print.
Optomec 3d printer New
BIGTREETECH Spring Steel Build Plate for SLA/DLP 3D printer 135X75MM Flexible Build System for Resin with Magnetic Sticker for Elegoo Mars/Mars Pro, Wanhao D7, Phrozen sonic mini 4k
  • 1) 【Fits Resin Printer】 Elegoo Mars/Mars Pro, Wanhao D7, Phrozen Sonic Mini 4K, MONOPRICE Mini Deluxe SLA.
  • 2) 【Stronger adsorption】 the special wire drawing treatment on the surface of the spring steel plate makes the model better absorb. Spring Steel, easy to Use and flexible, which has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
  • 3) 【Flat, Sturdy and Durable】 The steel plate is made of spring steel imported from the United States, which has good flatness and durability; the soft magnetic sheet is a strong magnetic soft magnetic sheet with strong magnetic force.
  • 4) 【Easily remove the model】 After using the spring steel plate, the model can be removed with a light flick. The traditional DLP printer platform requires the help of tools such as a spatula to take off the model.
  • 5) 【Easy to remove the steel plate】 Ergonomic handle design makes it easier to remove the steel plate from the platform.
Optomec 3d printer New
Tooart 3D Printer WiFi Box,Original Creality WiFi Box for 3D Printer Cloud Slice/Cloud Print/Real-Time Monitor/Remote Control Use with APP Compatible with Android iOS for Creality FDM 3D Printer
  • Powerful Performance: Equipped with a high-performance master control chip, the 3D printer is seamlessly connected to the Cloud Server, bringing an efficient transmission experience.
  • Efficient Transmission & Signal Stabilization: Multi-Terminal connection, easy to operate. Quickly transmitting Creality box APP instructions and slice file to 3D Printer wireless, more convenient in wireless 3D print mode.
  • Real-Time Remote Control: After connecting to the Creality Box, the 3D printer can be controlled remotely in real time through the Creality Cloud APP, relevant printing parameters can be set, and the printing can be monitored in real time.
  • Easy to Use: Download the ''Creality Cloud'' APP, then connect the device and internet, click the model library to print. Compatible with Android & iOS and suitable for all Creality FDM 3D printers.
  • Best Parter of 3D Print: There are many printing model files in Creality Cloud APP, covering culture, art, education, industry, medical and others. Together with Creality Box, it becomes a mobile cloud model library.
Optomec 3d printer New
ELEGOO Mars Pro 3D Printer, MSLA UV Photocuring LCD Resin Printer with Activated Carbon Front USB Port 3.5in Touch Screen, Matrix UV LED Light Source 115x65x150mm Printing Size
  • 【What's PRO than Mars? 】BGW15CA Linear guideway with accuracy of 0.02mm, smoother, quieter and more stable. 50w Matrix LED UV light source offer more uniform light emission, curing time lower to 6s per layer. Built-in Activated Carbon Filter, additional cover rubber sealing, no need to worry about the odor of resin
  • 【Convenient and Easy to Use】The build plate has changed to CNC turning CD pattern, which provides stronger adhesion when printing. The improved translucent resin vat is lighter. The USB port has changed to front from back, it is more convenient to plug the flash drive. Mars Pro also refactored user interface with dark background and simulant icons
  • 【Add Air Filter System】Mars Pro add a rubber sealing to the upper cover to prevent the resin odor from out of the cover. The built-in activated carbon filter can absorb and eliminate odor, so there is no need to worry about resin odor during printing
  • 【Better Printing Quality】Thanks to the upgraded Matrix 28 50W UV LED light source,the uniformity of light is increased to 95%. It means more accurate print size, layer exposure time is also reduced to 6 seconds. Mars 2 support .ctb format, smaller files but greatly increase the success rate of printing of bigger models
  • 【MSLA Technology】Digital mask controls which regions of the print area are illuminated by a panel light source array. This allows every object on the built plate to be photocured simultaneously. It means an ELEGOO Mars Pro printer can print 2 and more models as quickly as one. Mars Pro MSLA printer are much faster than SLA or DLP printers
Optomec 3d printer New
ANYCUBIC Photon Mono 3D Printer, UV LCD Resin 3D Printer Fast Printing with 6.08'' 2K Monochrome LCD, Off-line Print 5.11"(L) x 3.14"(W) x 6.49"(H) Printing Size
  • Faster Printing Resin 3d Printer, Photon Mono printing speed is 2.5X faster than the regular 3d printers, rapid prototyping greatly improved printing efficiency and saved more time, comes with a 6.08'' 2K Monochrome LCD and only takes 1.5 seconds per layer exposure to cure resin, whose service life is 4 times that of RGB LCD screen, save material and costs too
  • High Precision And Strong Stability, ANYCUBIC LCD screen Adopts matrix parallel light source, is able to carry out uniform exposure, improve the quality of models, Z-axis guide rail structure and stepper motor have better stability, with an accuracy of 0.01mm, it effectively eliminating layer patterns, It's a great 3D printer for printing games, movies, cartoon characters, miniatures, etc
  • Outstanding Prints And Easy To Use, Off-line printing function with size 5.11"(L) x 3.14"(W) x 6.49"(H) / 130 x 80 x165MM, Photon Mono resin 3d printer uses a removable one-piece transparent cover to make the internal space of the machine, and the printer can be set to stop printing immediately after opening the cover, which is convenient to operate and see the printing process, Friendly use for beginners and good performance for the enthusiasts
  • Outstanding Workshop, The transparent cover blocks up to 99.95% of ultraviolet rays with a wavelength of 405nm, can be effective high resin solidification rate and ensure your success printing, reduce wasting of resin, New photon mono uses One-piece FEP, which can be easier and quicker to replace
  • After Sale Service, All of our 3d printers provide one month free return and exchange, one year warranty (exclude consumable parts like LCD screen & FEP film) and lifetime technical support, If you encounter any problems, please feel free contact us
Optomec 3d printer New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Optomec 3d printer New
SHENLIJUAN 3D Printer CR-10 V3 With BL Touch Auto-Level Touch Screen Large Build Volume 3D Printer 300mmx300mmx400mm With Capricorn PTFE 2020 Newest Printer
  • Strong Compatibility Auto & Manual Leveling:BL touch (Auto Leveling Device) can be added by yourself,enjoying more fun of DIY your own 3d printer.
  • Dual Port Fan Cooling Plenum:Dual-port cooling fan extruder, Evenly heat- dissipated and coaling dawn immediately. reducing plugging and poor- spillage ensures models with high quality.
  • A New Tough All Metal Frame: High quality V Profile selected, more stable without any vibration,smoothly printed-out with high accuracy.
  • Upgraded Ultra Silent Mother Board: Self-developed Industrial-grade Motherboard and TMC2208 Utra Silent Drive are adopted /Cost-effective /Running more stable/ Noise reduction /Compression resistance.
Optomec 3d printer New
ANYCUBIC Photon Mono X 3D Printer, UV LCD Resin Printer with 8.9" 4K Monochrome Screen, WiFi Control and Fast Printing, Printing Size 192mmx120mmx250mm / 7.55inx4.72inx9.84in
  • 4K Monochrome Screen: ANYCUBIC Photon Mono X is a new UV Photocuring 3D resin printer with ultra-high resolution (3840*2400 pixels), highly restored details, and the screen service life is up to 2000h, more durable than ordinary color screen
  • 3X Faster Printing: single-layer exposure only takes 1-2 seconds, and the printing speed is Max 60mm/h, which is 3 times faster than ordinary resin printers. Do you want to finish printing faster? This printer help you to obtain higher quality models in a shorter time.
  • APP Remote Control & Large Printing Volume: Use this Mono X UV Photocuring LCD 3D Printer to realize remote printing management anytime and anywhere, monitor printing progress in real time, and adjust printing parameters at any time. In order to achieve the creation needs of larger models, it has a surprising printing volume, and printing volume size 192 * 120 * 250mm.
  • Double Linear Guide: Z-axis adopts the combination of double linear guide + screw motor + anti-backlash nut, improve the stability of Z-axis, run more stable, and eliminate printing layer lines. Independently researched and developed Anycubic slicing software, which is more powerful, supports 8 times anti-aliasing and smoother printing accuracy.
  • New Matrix UV Light Source: Using quartz lamp beads, a new generation of new matrix design, the light source is more uniform, and it can be used with 4K monochrome screen to achieve high-precision printing. The resin 3D printer contains exclusive UV heat dissipation channels, which can efficiently cool down, improve printing quality and service life, and reduce maintenance costs.

Where to buy?

If you are asking yourself where to buy Optomec 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Optomec 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Optomec 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Optomec 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Optomec 3d printer used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Optomec 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

ANYCUBIC Photon Mono X 3D Printer, UV LCD Resin Printer with 8.9" 4K Monochrome Screen, WiFi Control and Fast Printing, Printing Size 192mmx120mmx250mm / 7.55inx4.72inx9.84in
  • 4K Monochrome Screen: ANYCUBIC Photon Mono X is a new UV Photocuring 3D resin printer with ultra-high resolution (3840*2400 pixels), highly restored details, and the screen service life is up to 2000h, more durable than ordinary color screen
  • 3X Faster Printing: single-layer exposure only takes 1-2 seconds, and the printing speed is Max 60mm/h, which is 3 times faster than ordinary resin printers. Do you want to finish printing faster? This printer help you to obtain higher quality models in a shorter time.
  • APP Remote Control & Large Printing Volume: Use this Mono X UV Photocuring LCD 3D Printer to realize remote printing management anytime and anywhere, monitor printing progress in real time, and adjust printing parameters at any time. In order to achieve the creation needs of larger models, it has a surprising printing volume, and printing volume size 192 * 120 * 250mm.
  • Double Linear Guide: Z-axis adopts the combination of double linear guide + screw motor + anti-backlash nut, improve the stability of Z-axis, run more stable, and eliminate printing layer lines. Independently researched and developed Anycubic slicing software, which is more powerful, supports 8 times anti-aliasing and smoother printing accuracy.
  • New Matrix UV Light Source: Using quartz lamp beads, a new generation of new matrix design, the light source is more uniform, and it can be used with 4K monochrome screen to achieve high-precision printing. The resin 3D printer contains exclusive UV heat dissipation channels, which can efficiently cool down, improve printing quality and service life, and reduce maintenance costs.
3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board
  • It includes 3pack filament sensor kit. This filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing.
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing.
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet.
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard.
  • Used with other motherboards: The material detection module uses the level transition detection method. When with material in, the detection level signal should be high, and when no material, the material port level signal goes low. When the system detects a determined transition from high to low level, it will regard it as the material exhausted, then the board executes the pause command operation, and after the replacement of the material, it will continue to print.
Asixxsix Power outlet kit for 3D printer, switch socket, universal commercial home printer for 3D printer
  • U-type plug for easy installation.
  • Universal power switch socket module for 3D printer (NO limitation to models).
  • Comes with a fuse.
  • The lines have been pressed molding with insulated housing.
  • Adopting high quality green environmentally friendly material.
BIGTREETECH Spring Steel Build Plate for SLA/DLP 3D printer 135X75MM Flexible Build System for Resin with Magnetic Sticker for Elegoo Mars/Mars Pro, Wanhao D7, Phrozen sonic mini 4k
  • 1) 【Fits Resin Printer】 Elegoo Mars/Mars Pro, Wanhao D7, Phrozen Sonic Mini 4K, MONOPRICE Mini Deluxe SLA.
  • 2) 【Stronger adsorption】 the special wire drawing treatment on the surface of the spring steel plate makes the model better absorb. Spring Steel, easy to Use and flexible, which has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
  • 3) 【Flat, Sturdy and Durable】 The steel plate is made of spring steel imported from the United States, which has good flatness and durability; the soft magnetic sheet is a strong magnetic soft magnetic sheet with strong magnetic force.
  • 4) 【Easily remove the model】 After using the spring steel plate, the model can be removed with a light flick. The traditional DLP printer platform requires the help of tools such as a spatula to take off the model.
  • 5) 【Easy to remove the steel plate】 Ergonomic handle design makes it easier to remove the steel plate from the platform.
SHENLIJUAN 3D Printer CR-10 V3 With BL Touch Auto-Level Touch Screen Large Build Volume 3D Printer 300mmx300mmx400mm With Capricorn PTFE 2020 Newest Printer
  • Strong Compatibility Auto & Manual Leveling:BL touch (Auto Leveling Device) can be added by yourself,enjoying more fun of DIY your own 3d printer.
  • Dual Port Fan Cooling Plenum:Dual-port cooling fan extruder, Evenly heat- dissipated and coaling dawn immediately. reducing plugging and poor- spillage ensures models with high quality.
  • A New Tough All Metal Frame: High quality V Profile selected, more stable without any vibration,smoothly printed-out with high accuracy.
  • Upgraded Ultra Silent Mother Board: Self-developed Industrial-grade Motherboard and TMC2208 Utra Silent Drive are adopted /Cost-effective /Running more stable/ Noise reduction /Compression resistance.

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Optomec 3d printer.

Rating: 3.6 of 5 - 25 votes
1 Star2 Stars3 Stars4 Stars5 Stars (25 votes, average: 3.60 out of 5)
Loading...