Open source 3d printer kit Reviews and Best Deals

Online product reviews and comparisons for Open source 3d printer kit.

Latest Open source 3d printer kit
GEEETECH A10 3D Printer Aluminum Prusa I3 Half Assembled DIY Kit with Print Size 220×220×260mm,OPEN SOURCE GT2560 control board
  • 1. Fast 3 steps Self-assembly: Just takes about 10 minutes to install the Z-plane kit on the XY plane and wiring. Simple and convenient.
  • 2. With its build volume as 220*220*260mm³, A10 makes the best of the building platform and gives you a full view of the printing details.
  • 3. Good Adhesion of Building Platform: Building platform without the need of attaching the masking tape. Freeing you from the headache of first layer warping
  • 4. Filament detector: The filament detector eliminates the pain caused by the breaking or breaking of the filament. The detection system will warn you to change the filament if the printer is running in the air or the coil is empty. This additional gadget would avoid printing without starting and improving print satisfaction.
  • 5. Break Resume :The restore pause function provides A10 to save the print status in real time and resume the print job exactly where it left off. This feature completely eliminates the hassle of repetitive and boring printing caused by a sudden power outage. Eliminate the hassle of printing large 3D models.
Latest Open source 3d printer kit
ASHATA 3D Printer Motherboard d, 3D Control Boar 3D Printer 32-Bit Motherboard MKS SBASE V1.3 Open Source Firmware Accessory 3D Printer Controller Kit
  • Using 32-bit 100M Cortex-M3 LPC 1768 main control chip, performance greatly improved.
  • Support for highly modular open source firmware for easy secondary development, eliminating the hassle of not being able to master the core code.Support network functions, through the network line can be directly connected to the network, the use of the browser can achieve remote control.
  • Using 8825 as motor drive, supporting 32 subdivisions, performance far exceeds 4988, using SOP package, better heat dissipation.
  • The stepping motor current is set directly, and there is no need to worry about damaging the drive or potentiometer when adjusting the current.Circuit board using high - quality 4 - layer board, and made a special heat dissipation optimization.
  • Use special power chip, support 12V-24V power input.It can be connected to 12864LCD and touch screen MKS TFT28.
DISCOUNTLatest Open source 3d printer kit
XVICO 3D Printer X3s Kit DIY Rapid Assembly with Open Source Marlin 2.0, Large Build Print Area 220x220x250mm for PLA, PETG, ABS, TPU Filaments
  • 【USB Online Printing and Intelligent Filament Detection Function】: XVICO X3s 3D printer supports USB online printing. It can be directly connected to the computer via USB to control the printer, saving you the steps of inserting and removing the card. Please note: We do not provide USB cables. When the filament runs out or accidentally breaks during printing, the printer will automatically pause to protect the model.
  • 【Super Fine Print and Double Gear Extrusion】: X3s 3D printer has 4 printing modes: super fine 0.05 mm, high quality 0.1 mm, standard 0.2 mm and fast 0.3 mm. Provide you with more choice of printing precision. The unique double gear extrusion can reduce the slipping and increase the feeding force, making the feeding more uniform and smooth.
  • 【Rapid Assembly and Easily Removed】: Assembling a x3s it only takes 10 minutes, Ideal for beginners and old players, even children. Equipped with lattice glass platform, when heated, the model adhesion is strong; after the platform is cooled, the model can be easily removed.
  • 【2.8in HD Touch Screen and Multi-language Support】: X3s printer is equipped with 2.8in HD full color touch screen, simple UI interface, simple and fast operation. And supports multiple national languages: English, German, Spanish, Italian, Russian, Chinese. Let more 3d enthusiasts use our X3s printer.
  • 【One Year Warranty Policy and 24hrs Considerate Service】: XVICO will provide you with one year warranty policy and professional technical guidance. We are equipped with replaceable parts in overseas warehouse, you can receive new parts within one week. Our customer service will be 24hrs for you to help you solve the problem.
Latest Open source 3d printer kit
HE3D Open source ciclop DIY laser 3d scanner kit for 3d printer, designer and engineer DIY basic 3D scanner kit, injection parts
  • Product features
    Totally open source 3D scanner for 3D printing , free to get the software
    Easy to assemble and use
    Full kits, it include all the parts for the scanner
    Injection molding red plastics parts, not printed! that make the scanner more beatiful, you won't encouter the problem caused by not precision size
    Upgrade to new intergrated motherboard
Latest Open source 3d printer kit
3D printer A13 with Magnetic Build Surface Resume Print 3D Printers with open source and excellent print quality printing area is 220 * 220 * 250 mm
  • The easy-to-install 3D Printer DIY Kit provides more benefits in the world of 3D printing, provides power, and continues printing. You can continue printing after the power is restored
  • The maximum print size of 220 * 220 * 250mm supports a variety of 1.75mm print filaments such as PLA, ABS, wood, TPU, gradient, carbon fiber, etc. that are compatible with Windows XP / Vista / 7/8 /, MAC, Linux operating system.
  • Extruder greatly reduces plugging risk and bad extrustion,V-Slot with POM wheel make it move noiseless, smoothly and durable.
  • The high-precision MK-10 extruder reduces the risk of clogging and uneven extrusion. The hotplate can reach 110 ° C in about 5 minutes to meet the requirements for rapid heating and printing.
  • The high-precision MK-10 extruder reduces the risk of clogging and uneven extrusion. The hotplate can reach 110 ° C in about 5 minutes to meet the requirements for rapid heating and printing.
Latest Open source 3d printer kit
NARJOG ViVi Plen2 Humanoid Open-Source DIY Robot Kit Compatible With 3D Printer
  • NARJOG ViVi Plen2 Humanoid Open-Source DIY Robot Kit Compatible With 3D Printer
  • Electronic Components & DIY Kits
  • Smart Robot & Solar Panel
Latest Open source 3d printer kit
Mipcase Open Source MKS V1.3 SBASE Control Board with MKS TFT28 2.8 inch Full Color Touch Screen Kit Set 3D Printer Part Supply Accessory
  • Adopt 32bit 100M Cortex-M3 LPC 1768 master chip, greatly improves performance.
  • Highly modular open source firmware, convenient for secondary development, no need to worry about unable to master the core code.
  • Adopt 8825 as a moto drive, support 32 subdivision, performance far exceeds 4988, using SOP package, better heat dissipation.
  • High quality 4-layer circuit board and specifically optimized thermal treatment.
  • Can also connect 12864 LCD.
Latest Open source 3d printer kit
F Fityle 3D Printer Kits - Smoothieboard 5X V1.1 Open Source Mainboard + LCD 12864 Display + GLCD Adapter PlatePrinter Mainboard Part
  • The Smoothieboard full graphic LCD Adapter is a plug and play adapter board for the Smoothieboard that will allow you to connect one of our Full graphic LCD Smart controllers.
  • Smoothieboard is OpenSource, this means there are countless support sites and an entire community helping each other.
  • Smoothieboard is a controller board for digital fabrication machines. It is made to be used in 3D printers (RepRap) and CNC mills.
  • This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
  • Compared to most existing boards, it is based on a more powerful microcontroller, is much simpler to configure and use, and offers many new features.
Latest Open source 3d printer kit
LBWNB Car cleaning kit Accessories 3D printer accessories motherboard control board MKS GEN-L V1.0 compatible ramps open source marlin 3D Printer
  • 2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors.Support a variety of stepper drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change the stepper drivers and motors as users like.
  • Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors.
  • Aiming at the problems exist on the open sourced controller board such as Ramps 1.4, the developers in Makerbase specially optimize and develop a product, MKS Gen_L, which provides more flexible choices for users.
  • Use high-quality MOSFET, better cooling and more stable.Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage.Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing.
  • We strive to answer all questions and resolve any problems as quickly as possible. Your satisfication is Our Goal! Thank you!

Buy Open source 3d printer kit from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Open source 3d printer kit, buy Open source 3d printer kit directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Open source 3d printer kit including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


DISCOUNTBest
XVICO 3D Printer X3s Kit DIY Rapid Assembly with Open Source Marlin 2.0, Large Build Print Area 220x220x250mm for PLA, PETG, ABS, TPU Filaments
  • 【USB Online Printing and Intelligent Filament Detection Function】: XVICO X3s 3D printer supports USB online printing. It can be directly connected to the computer via USB to control the printer, saving you the steps of inserting and removing the card. Please note: We do not provide USB cables. When the filament runs out or accidentally breaks during printing, the printer will automatically pause to protect the model.
  • 【Super Fine Print and Double Gear Extrusion】: X3s 3D printer has 4 printing modes: super fine 0.05 mm, high quality 0.1 mm, standard 0.2 mm and fast 0.3 mm. Provide you with more choice of printing precision. The unique double gear extrusion can reduce the slipping and increase the feeding force, making the feeding more uniform and smooth.
  • 【Rapid Assembly and Easily Removed】: Assembling a x3s it only takes 10 minutes, Ideal for beginners and old players, even children. Equipped with lattice glass platform, when heated, the model adhesion is strong; after the platform is cooled, the model can be easily removed.
  • 【2.8in HD Touch Screen and Multi-language Support】: X3s printer is equipped with 2.8in HD full color touch screen, simple UI interface, simple and fast operation. And supports multiple national languages: English, German, Spanish, Italian, Russian, Chinese. Let more 3d enthusiasts use our X3s printer.
  • 【One Year Warranty Policy and 24hrs Considerate Service】: XVICO will provide you with one year warranty policy and professional technical guidance. We are equipped with replaceable parts in overseas warehouse, you can receive new parts within one week. Our customer service will be 24hrs for you to help you solve the problem.
Best
GEEETECH A10 3D Printer Aluminum Prusa I3 Half Assembled DIY Kit with Print Size 220×220×260mm,OPEN SOURCE GT2560 control board
  • 1. Fast 3 steps Self-assembly: Just takes about 10 minutes to install the Z-plane kit on the XY plane and wiring. Simple and convenient.
  • 2. With its build volume as 220*220*260mm³, A10 makes the best of the building platform and gives you a full view of the printing details.
  • 3. Good Adhesion of Building Platform: Building platform without the need of attaching the masking tape. Freeing you from the headache of first layer warping
  • 4. Filament detector: The filament detector eliminates the pain caused by the breaking or breaking of the filament. The detection system will warn you to change the filament if the printer is running in the air or the coil is empty. This additional gadget would avoid printing without starting and improving print satisfaction.
  • 5. Break Resume :The restore pause function provides A10 to save the print status in real time and resume the print job exactly where it left off. This feature completely eliminates the hassle of repetitive and boring printing caused by a sudden power outage. Eliminate the hassle of printing large 3D models.
Best
HE3D Open source ciclop DIY laser 3d scanner kit for 3d printer, designer and engineer DIY basic 3D scanner kit, injection parts
  • Product features
    Totally open source 3D scanner for 3D printing , free to get the software
    Easy to assemble and use
    Full kits, it include all the parts for the scanner
    Injection molding red plastics parts, not printed! that make the scanner more beatiful, you won't encouter the problem caused by not precision size
    Upgrade to new intergrated motherboard
Best
GKD 3D Printer Scanner, Three-Dimensional Accessories High Precision Scanner DIY Kit Open Source Portable for Printer
  • 1. The surface of injection molding plastic parts is more smooth and clean.Compared with printed plastic parts, You do not need to fix it.It is more durable than printed plastic parts.
  • 2. Two Big Advantages of the New Design.1. it is more easy to install.2. you can stable the board on this plastic parts.
  • 3. this scanner belongs to desktop 3D scanners, which can not match with industrial standard scanners, and it is not suitable for scanning irregular and complex objects, only scan nearly cylindrical object, the effect will be more ideal, there are many factors affect scan result. like scanned objects, environment and light. there is a big relationship between them, so we recommend you scan in Constant Light Studio, scanning results will be better.
  • 4. for installation and final you can scan object, it needs you own a certain handle ability and related knowledge, as it is open source, you can search on line and communicate with others, we can not guarantee that all the customer can operated it well, as there are too many factors affect the results, but we will try our best to provide you support, this project is also in continuous improvement, I hope we can work together!
  • 5. If you have any questions, you can contact me before you give the feedback,we will do our best to help you solve the problem!
Best
ASHATA 3D Printer Motherboard d, 3D Control Boar 3D Printer 32-Bit Motherboard MKS SBASE V1.3 Open Source Firmware Accessory 3D Printer Controller Kit
  • Using 32-bit 100M Cortex-M3 LPC 1768 main control chip, performance greatly improved.
  • Support for highly modular open source firmware for easy secondary development, eliminating the hassle of not being able to master the core code.Support network functions, through the network line can be directly connected to the network, the use of the browser can achieve remote control.
  • Using 8825 as motor drive, supporting 32 subdivisions, performance far exceeds 4988, using SOP package, better heat dissipation.
  • The stepping motor current is set directly, and there is no need to worry about damaging the drive or potentiometer when adjusting the current.Circuit board using high - quality 4 - layer board, and made a special heat dissipation optimization.
  • Use special power chip, support 12V-24V power input.It can be connected to 12864LCD and touch screen MKS TFT28.

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Open source 3d printer kit

Here is the ranking of the best Open source 3d printer kit, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Open source 3d printer kit and read the reviews left by real customers, see the Open source 3d printer kit ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Open source 3d printer kit New
CNC Expansion Board, Expansion Board A4988 Driver, Motor Driver 3D Printer 3D Printer Driver For Engraver
  • PWM spindle and direction pin, 4 shaft support (X, Y, Z, A ‑ you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
  • Use removable A4988 or DRV8825 compatible stepping driver
  • Compact design, stepping motor can connect 4 pin connectors or be soldered
  • The extension board can be used for engraving machine or 3D printer driver
  • Compatible with GRBL 0.8. Open‑source firmware , converting G code command into stepping signal
Open source 3d printer kit New
CNC Shield, A4988 Stepper Red V3.0 Board, CNC Shield Expansion Board Motor Driver 3D Printer Driver CNC Expansion Board GRBL 0.8 For Engraver
  • Compact design, stepping motor can connect 4 pin connectors or be soldered
  • PWM spindle and direction pin, 4 shaft support (X, Y, Z, A ‑ you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
  • The extension board can be used for engraving machine or 3D printer driver
  • Use removable A4988 or DRV8825 compatible stepping driver
  • Compatible with GRBL 0.8. Open‑source firmware , converting G code command into stepping signal
Open source 3d printer kit New
CNC Shield, A4988 Driver, Compact Design A4988 Stepper For Engraver GRBL 0.8 3D Printer Driver CNC Expansion Board
  • Compatible with GRBL 0.8. Open‑source firmware , converting G code command into stepping signal
  • PWM spindle and direction pin, 4 shaft support (X, Y, Z, A ‑ you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
  • The extension board can be used for engraving machine or 3D printer driver
  • Compact design, stepping motor can connect 4 pin connectors or be soldered
  • Use removable A4988 or DRV8825 compatible stepping driver
DISCOUNTOpen source 3d printer kit New
CNC Shield, V3.0 Board, Expansion Board Red A4988 Stepper 3D Printer GRBL 0.8 For Engraver 3D Printer Driver CNC Expansion Board
  • Use removable A4988 or DRV8825 compatible stepping driver
  • Compatible with GRBL 0.8. Open‑source firmware , converting G code command into stepping signal
  • The extension board can be used for engraving machine or 3D printer driver
  • Compact design, stepping motor can connect 4 pin connectors or be soldered
  • PWM spindle and direction pin, 4 shaft support (X, Y, Z, A ‑ you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
Open source 3d printer kit New
Gesh 3D Contact Auto Bed Leveling Sensor Kit for Creality Ender 3 3 Pro 3S Ender 5 CR10 CR10S CR20 20 Pro S4 S5
  • 3.Can detect any printed surface, including glass.
  • 2.Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • 4.An automatic leveling sensor based on open source 3D printer.
  • 1.This auto bed leveling sensor make it easier to levelling the hot bed, which can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
  • 5.Suitable for Ender-3 / Ender-3s / Ender-3 Pro /Ender 5 /CR-10 / CR-10S/ CR 10S4/ CR 10S5/ CR-20 / CR-20 Pro and so on 3D Printer
Open source 3d printer kit New
OGUAN PCB Board, MKS SGEN L Mainboard Compatible Smoothieware 32-Bit Marlin2.0 Support TMC2208 V1.2 with Tester for 3D Printer Parts Double Sided Prototype
  • Compatible with a variety of drivers and special modes (the uart mode of the TMC2208, the SPI mode of the TMC2130, etc.) has a dedicated port reservation, and the wiring settings are more concise and convenient.
  • Support a variety of open source firmware, continue the s series motherboard with the smoothieware firmware, SGen-L can also support the marlin2.0 version of the firmware
  • Using 32-bit Cortex-M3 1768 master chip, 100MHZ frequency, strong computing power, greatly improved.
  • It has both in-line drive socket and external drive port, which is more expandable and more selective.
  • Customer satisfaction is our sole purpose. If you have any questions about the product, please contact us in due time. We will contact you within 24 hours.
Open source 3d printer kit New
KEKEYANG 10pcsElectronic Organ Kit DIY Interest Production Module Kit With 2 Battery Boxes DIY NE555 Eight-note Spot Steuermodul Controller Board
  • The frequency is chosen by S1-S8 touch button training.
  • By operating the corresponding button, the loudspeaker can emit 8 different notes.
  • The circuit is composed of very small peripheral components such as main chip NE555, resistor R1-R9, C1 and so on. The oscillation frequency is determined by the resistance value of resistance R1-R8.
  • Music can be produced by music score.
  • Welcoming to purchase our products. You can purchase without worries. If you have any questions, please feel free to contact us, you will be assisted within 24 hours.
Open source 3d printer kit New
Timagebreze Open Source Diy 3D Scanner Three-Dimensional Scanner Injection Molding Plastics Parts Desktop For Reprap 3D Printer
  • Executes the control firmware of the motor and the s.
  • Become a part of the 3D scanning open source community today and contribute to the development of 3D scanning technology
  • Is a 3D rotational triangulation scanner,it uses 2 s projected over an object to capture the geometry and texture as it rotates on a turntable
  • The board,includes improvements and better features than other similar boards,which make it the best option for developing electronics projects
  • Weight:3.5KG
Open source 3d printer kit New
Gesh Open Source Diy 3D Scanner Three-Dimensional Scanner Injection Molding Plastics Parts Desktop For Reprap 3D Printer
  • Become a part of the 3D scanning open source community today and contribute to the development of 3D scanning technology
  • The board,includes improvements and better features than other similar boards,which make it the best option for developing electronics projects
  • Is a 3D rotational triangulation scanner,it uses 2 s projected over an object to capture the geometry and texture as it rotates on a turntable
  • Executes the control firmware of the motor and the s.
  • Weight:3.5KG

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Open source 3d printer kit. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Open source 3d printer kit give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

Timagebreze Open Source Diy 3D Scanner Three-Dimensional Scanner Injection Molding Plastics Parts Desktop For Reprap 3D Printer
  • Executes the control firmware of the motor and the s.
  • Become a part of the 3D scanning open source community today and contribute to the development of 3D scanning technology
  • Is a 3D rotational triangulation scanner,it uses 2 s projected over an object to capture the geometry and texture as it rotates on a turntable
  • The board,includes improvements and better features than other similar boards,which make it the best option for developing electronics projects
  • Weight:3.5KG
CNC Shield, A4988 Driver, Compact Design A4988 Stepper For Engraver GRBL 0.8 3D Printer Driver CNC Expansion Board
  • Compatible with GRBL 0.8. Open‑source firmware , converting G code command into stepping signal
  • PWM spindle and direction pin, 4 shaft support (X, Y, Z, A ‑ you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
  • The extension board can be used for engraving machine or 3D printer driver
  • Compact design, stepping motor can connect 4 pin connectors or be soldered
  • Use removable A4988 or DRV8825 compatible stepping driver
Gesh 3D Contact Auto Bed Leveling Sensor Kit for Creality Ender 3 3 Pro 3S Ender 5 CR10 CR10S CR20 20 Pro S4 S5
  • 3.Can detect any printed surface, including glass.
  • 2.Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • 4.An automatic leveling sensor based on open source 3D printer.
  • 1.This auto bed leveling sensor make it easier to levelling the hot bed, which can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
  • 5.Suitable for Ender-3 / Ender-3s / Ender-3 Pro /Ender 5 /CR-10 / CR-10S/ CR 10S4/ CR 10S5/ CR-20 / CR-20 Pro and so on 3D Printer
Gesh Open Source Diy 3D Scanner Three-Dimensional Scanner Injection Molding Plastics Parts Desktop For Reprap 3D Printer
  • Become a part of the 3D scanning open source community today and contribute to the development of 3D scanning technology
  • The board,includes improvements and better features than other similar boards,which make it the best option for developing electronics projects
  • Is a 3D rotational triangulation scanner,it uses 2 s projected over an object to capture the geometry and texture as it rotates on a turntable
  • Executes the control firmware of the motor and the s.
  • Weight:3.5KG
CNC Expansion Board, Expansion Board A4988 Driver, Motor Driver 3D Printer 3D Printer Driver For Engraver
  • PWM spindle and direction pin, 4 shaft support (X, Y, Z, A ‑ you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
  • Use removable A4988 or DRV8825 compatible stepping driver
  • Compact design, stepping motor can connect 4 pin connectors or be soldered
  • The extension board can be used for engraving machine or 3D printer driver
  • Compatible with GRBL 0.8. Open‑source firmware , converting G code command into stepping signal

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Open source 3d printer kit actually costs.

Latest Open source 3d printer kit
GEEETECH A10 3D Printer Aluminum Prusa I3 Half Assembled DIY Kit with Print Size 220×220×260mm,OPEN SOURCE GT2560 control board
  • 1. Fast 3 steps Self-assembly: Just takes about 10 minutes to install the Z-plane kit on the XY plane and wiring. Simple and convenient.
  • 2. With its build volume as 220*220*260mm³, A10 makes the best of the building platform and gives you a full view of the printing details.
  • 3. Good Adhesion of Building Platform: Building platform without the need of attaching the masking tape. Freeing you from the headache of first layer warping
  • 4. Filament detector: The filament detector eliminates the pain caused by the breaking or breaking of the filament. The detection system will warn you to change the filament if the printer is running in the air or the coil is empty. This additional gadget would avoid printing without starting and improving print satisfaction.
  • 5. Break Resume :The restore pause function provides A10 to save the print status in real time and resume the print job exactly where it left off. This feature completely eliminates the hassle of repetitive and boring printing caused by a sudden power outage. Eliminate the hassle of printing large 3D models.
Latest Open source 3d printer kit
ASHATA 3D Printer Motherboard d, 3D Control Boar 3D Printer 32-Bit Motherboard MKS SBASE V1.3 Open Source Firmware Accessory 3D Printer Controller Kit
  • Using 32-bit 100M Cortex-M3 LPC 1768 main control chip, performance greatly improved.
  • Support for highly modular open source firmware for easy secondary development, eliminating the hassle of not being able to master the core code.Support network functions, through the network line can be directly connected to the network, the use of the browser can achieve remote control.
  • Using 8825 as motor drive, supporting 32 subdivisions, performance far exceeds 4988, using SOP package, better heat dissipation.
  • The stepping motor current is set directly, and there is no need to worry about damaging the drive or potentiometer when adjusting the current.Circuit board using high - quality 4 - layer board, and made a special heat dissipation optimization.
  • Use special power chip, support 12V-24V power input.It can be connected to 12864LCD and touch screen MKS TFT28.
DISCOUNTLatest Open source 3d printer kit
XVICO 3D Printer X3s Kit DIY Rapid Assembly with Open Source Marlin 2.0, Large Build Print Area 220x220x250mm for PLA, PETG, ABS, TPU Filaments
  • 【USB Online Printing and Intelligent Filament Detection Function】: XVICO X3s 3D printer supports USB online printing. It can be directly connected to the computer via USB to control the printer, saving you the steps of inserting and removing the card. Please note: We do not provide USB cables. When the filament runs out or accidentally breaks during printing, the printer will automatically pause to protect the model.
  • 【Super Fine Print and Double Gear Extrusion】: X3s 3D printer has 4 printing modes: super fine 0.05 mm, high quality 0.1 mm, standard 0.2 mm and fast 0.3 mm. Provide you with more choice of printing precision. The unique double gear extrusion can reduce the slipping and increase the feeding force, making the feeding more uniform and smooth.
  • 【Rapid Assembly and Easily Removed】: Assembling a x3s it only takes 10 minutes, Ideal for beginners and old players, even children. Equipped with lattice glass platform, when heated, the model adhesion is strong; after the platform is cooled, the model can be easily removed.
  • 【2.8in HD Touch Screen and Multi-language Support】: X3s printer is equipped with 2.8in HD full color touch screen, simple UI interface, simple and fast operation. And supports multiple national languages: English, German, Spanish, Italian, Russian, Chinese. Let more 3d enthusiasts use our X3s printer.
  • 【One Year Warranty Policy and 24hrs Considerate Service】: XVICO will provide you with one year warranty policy and professional technical guidance. We are equipped with replaceable parts in overseas warehouse, you can receive new parts within one week. Our customer service will be 24hrs for you to help you solve the problem.
Latest Open source 3d printer kit
HE3D Open source ciclop DIY laser 3d scanner kit for 3d printer, designer and engineer DIY basic 3D scanner kit, injection parts
  • Product features
    Totally open source 3D scanner for 3D printing , free to get the software
    Easy to assemble and use
    Full kits, it include all the parts for the scanner
    Injection molding red plastics parts, not printed! that make the scanner more beatiful, you won't encouter the problem caused by not precision size
    Upgrade to new intergrated motherboard
Latest Open source 3d printer kit
3D printer A13 with Magnetic Build Surface Resume Print 3D Printers with open source and excellent print quality printing area is 220 * 220 * 250 mm
  • The easy-to-install 3D Printer DIY Kit provides more benefits in the world of 3D printing, provides power, and continues printing. You can continue printing after the power is restored
  • The maximum print size of 220 * 220 * 250mm supports a variety of 1.75mm print filaments such as PLA, ABS, wood, TPU, gradient, carbon fiber, etc. that are compatible with Windows XP / Vista / 7/8 /, MAC, Linux operating system.
  • Extruder greatly reduces plugging risk and bad extrustion,V-Slot with POM wheel make it move noiseless, smoothly and durable.
  • The high-precision MK-10 extruder reduces the risk of clogging and uneven extrusion. The hotplate can reach 110 ° C in about 5 minutes to meet the requirements for rapid heating and printing.
  • The high-precision MK-10 extruder reduces the risk of clogging and uneven extrusion. The hotplate can reach 110 ° C in about 5 minutes to meet the requirements for rapid heating and printing.
Latest Open source 3d printer kit
NARJOG ViVi Plen2 Humanoid Open-Source DIY Robot Kit Compatible With 3D Printer
  • NARJOG ViVi Plen2 Humanoid Open-Source DIY Robot Kit Compatible With 3D Printer
  • Electronic Components & DIY Kits
  • Smart Robot & Solar Panel
Latest Open source 3d printer kit
Mipcase Open Source MKS V1.3 SBASE Control Board with MKS TFT28 2.8 inch Full Color Touch Screen Kit Set 3D Printer Part Supply Accessory
  • Adopt 32bit 100M Cortex-M3 LPC 1768 master chip, greatly improves performance.
  • Highly modular open source firmware, convenient for secondary development, no need to worry about unable to master the core code.
  • Adopt 8825 as a moto drive, support 32 subdivision, performance far exceeds 4988, using SOP package, better heat dissipation.
  • High quality 4-layer circuit board and specifically optimized thermal treatment.
  • Can also connect 12864 LCD.
Latest Open source 3d printer kit
F Fityle 3D Printer Kits - Smoothieboard 5X V1.1 Open Source Mainboard + LCD 12864 Display + GLCD Adapter PlatePrinter Mainboard Part
  • The Smoothieboard full graphic LCD Adapter is a plug and play adapter board for the Smoothieboard that will allow you to connect one of our Full graphic LCD Smart controllers.
  • Smoothieboard is OpenSource, this means there are countless support sites and an entire community helping each other.
  • Smoothieboard is a controller board for digital fabrication machines. It is made to be used in 3D printers (RepRap) and CNC mills.
  • This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
  • Compared to most existing boards, it is based on a more powerful microcontroller, is much simpler to configure and use, and offers many new features.
Latest Open source 3d printer kit
LBWNB Car cleaning kit Accessories 3D printer accessories motherboard control board MKS GEN-L V1.0 compatible ramps open source marlin 3D Printer
  • 2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors.Support a variety of stepper drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change the stepper drivers and motors as users like.
  • Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors.
  • Aiming at the problems exist on the open sourced controller board such as Ramps 1.4, the developers in Makerbase specially optimize and develop a product, MKS Gen_L, which provides more flexible choices for users.
  • Use high-quality MOSFET, better cooling and more stable.Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage.Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing.
  • We strive to answer all questions and resolve any problems as quickly as possible. Your satisfication is Our Goal! Thank you!

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Open source 3d printer kit could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Open source 3d printer kit which are among the cheapest on the market. Just scroll through the list to find Open source 3d printer kit the cheapest products.

Catalog

The product Open source 3d printer kit can be found in the dedicated catalog where the entire list of products on sale is presented.

Open source 3d printer kit is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Open source 3d printer kit New
CNC Expansion Board, Expansion Board A4988 Driver, Motor Driver 3D Printer 3D Printer Driver For Engraver
  • PWM spindle and direction pin, 4 shaft support (X, Y, Z, A ‑ you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
  • Use removable A4988 or DRV8825 compatible stepping driver
  • Compact design, stepping motor can connect 4 pin connectors or be soldered
  • The extension board can be used for engraving machine or 3D printer driver
  • Compatible with GRBL 0.8. Open‑source firmware , converting G code command into stepping signal
Open source 3d printer kit New
CNC Shield, A4988 Stepper Red V3.0 Board, CNC Shield Expansion Board Motor Driver 3D Printer Driver CNC Expansion Board GRBL 0.8 For Engraver
  • Compact design, stepping motor can connect 4 pin connectors or be soldered
  • PWM spindle and direction pin, 4 shaft support (X, Y, Z, A ‑ you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
  • The extension board can be used for engraving machine or 3D printer driver
  • Use removable A4988 or DRV8825 compatible stepping driver
  • Compatible with GRBL 0.8. Open‑source firmware , converting G code command into stepping signal
Open source 3d printer kit New
CNC Shield, A4988 Driver, Compact Design A4988 Stepper For Engraver GRBL 0.8 3D Printer Driver CNC Expansion Board
  • Compatible with GRBL 0.8. Open‑source firmware , converting G code command into stepping signal
  • PWM spindle and direction pin, 4 shaft support (X, Y, Z, A ‑ you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
  • The extension board can be used for engraving machine or 3D printer driver
  • Compact design, stepping motor can connect 4 pin connectors or be soldered
  • Use removable A4988 or DRV8825 compatible stepping driver
DISCOUNTOpen source 3d printer kit New
CNC Shield, V3.0 Board, Expansion Board Red A4988 Stepper 3D Printer GRBL 0.8 For Engraver 3D Printer Driver CNC Expansion Board
  • Use removable A4988 or DRV8825 compatible stepping driver
  • Compatible with GRBL 0.8. Open‑source firmware , converting G code command into stepping signal
  • The extension board can be used for engraving machine or 3D printer driver
  • Compact design, stepping motor can connect 4 pin connectors or be soldered
  • PWM spindle and direction pin, 4 shaft support (X, Y, Z, A ‑ you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
Open source 3d printer kit New
Gesh 3D Contact Auto Bed Leveling Sensor Kit for Creality Ender 3 3 Pro 3S Ender 5 CR10 CR10S CR20 20 Pro S4 S5
  • 3.Can detect any printed surface, including glass.
  • 2.Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • 4.An automatic leveling sensor based on open source 3D printer.
  • 1.This auto bed leveling sensor make it easier to levelling the hot bed, which can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
  • 5.Suitable for Ender-3 / Ender-3s / Ender-3 Pro /Ender 5 /CR-10 / CR-10S/ CR 10S4/ CR 10S5/ CR-20 / CR-20 Pro and so on 3D Printer
Open source 3d printer kit New
OGUAN PCB Board, MKS SGEN L Mainboard Compatible Smoothieware 32-Bit Marlin2.0 Support TMC2208 V1.2 with Tester for 3D Printer Parts Double Sided Prototype
  • Compatible with a variety of drivers and special modes (the uart mode of the TMC2208, the SPI mode of the TMC2130, etc.) has a dedicated port reservation, and the wiring settings are more concise and convenient.
  • Support a variety of open source firmware, continue the s series motherboard with the smoothieware firmware, SGen-L can also support the marlin2.0 version of the firmware
  • Using 32-bit Cortex-M3 1768 master chip, 100MHZ frequency, strong computing power, greatly improved.
  • It has both in-line drive socket and external drive port, which is more expandable and more selective.
  • Customer satisfaction is our sole purpose. If you have any questions about the product, please contact us in due time. We will contact you within 24 hours.
Open source 3d printer kit New
KEKEYANG 10pcsElectronic Organ Kit DIY Interest Production Module Kit With 2 Battery Boxes DIY NE555 Eight-note Spot Steuermodul Controller Board
  • The frequency is chosen by S1-S8 touch button training.
  • By operating the corresponding button, the loudspeaker can emit 8 different notes.
  • The circuit is composed of very small peripheral components such as main chip NE555, resistor R1-R9, C1 and so on. The oscillation frequency is determined by the resistance value of resistance R1-R8.
  • Music can be produced by music score.
  • Welcoming to purchase our products. You can purchase without worries. If you have any questions, please feel free to contact us, you will be assisted within 24 hours.
Open source 3d printer kit New
Timagebreze Open Source Diy 3D Scanner Three-Dimensional Scanner Injection Molding Plastics Parts Desktop For Reprap 3D Printer
  • Executes the control firmware of the motor and the s.
  • Become a part of the 3D scanning open source community today and contribute to the development of 3D scanning technology
  • Is a 3D rotational triangulation scanner,it uses 2 s projected over an object to capture the geometry and texture as it rotates on a turntable
  • The board,includes improvements and better features than other similar boards,which make it the best option for developing electronics projects
  • Weight:3.5KG
Open source 3d printer kit New
Gesh Open Source Diy 3D Scanner Three-Dimensional Scanner Injection Molding Plastics Parts Desktop For Reprap 3D Printer
  • Become a part of the 3D scanning open source community today and contribute to the development of 3D scanning technology
  • The board,includes improvements and better features than other similar boards,which make it the best option for developing electronics projects
  • Is a 3D rotational triangulation scanner,it uses 2 s projected over an object to capture the geometry and texture as it rotates on a turntable
  • Executes the control firmware of the motor and the s.
  • Weight:3.5KG

Where to buy?

If you are asking yourself where to buy Open source 3d printer kit? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Open source 3d printer kit, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Open source 3d printer kit and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Open source 3d printer kit may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Open source 3d printer kit used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Open source 3d printer kit at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

Timagebreze Open Source Diy 3D Scanner Three-Dimensional Scanner Injection Molding Plastics Parts Desktop For Reprap 3D Printer
  • Executes the control firmware of the motor and the s.
  • Become a part of the 3D scanning open source community today and contribute to the development of 3D scanning technology
  • Is a 3D rotational triangulation scanner,it uses 2 s projected over an object to capture the geometry and texture as it rotates on a turntable
  • The board,includes improvements and better features than other similar boards,which make it the best option for developing electronics projects
  • Weight:3.5KG
CNC Shield, A4988 Driver, Compact Design A4988 Stepper For Engraver GRBL 0.8 3D Printer Driver CNC Expansion Board
  • Compatible with GRBL 0.8. Open‑source firmware , converting G code command into stepping signal
  • PWM spindle and direction pin, 4 shaft support (X, Y, Z, A ‑ you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
  • The extension board can be used for engraving machine or 3D printer driver
  • Compact design, stepping motor can connect 4 pin connectors or be soldered
  • Use removable A4988 or DRV8825 compatible stepping driver
Gesh 3D Contact Auto Bed Leveling Sensor Kit for Creality Ender 3 3 Pro 3S Ender 5 CR10 CR10S CR20 20 Pro S4 S5
  • 3.Can detect any printed surface, including glass.
  • 2.Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • 4.An automatic leveling sensor based on open source 3D printer.
  • 1.This auto bed leveling sensor make it easier to levelling the hot bed, which can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
  • 5.Suitable for Ender-3 / Ender-3s / Ender-3 Pro /Ender 5 /CR-10 / CR-10S/ CR 10S4/ CR 10S5/ CR-20 / CR-20 Pro and so on 3D Printer
Gesh Open Source Diy 3D Scanner Three-Dimensional Scanner Injection Molding Plastics Parts Desktop For Reprap 3D Printer
  • Become a part of the 3D scanning open source community today and contribute to the development of 3D scanning technology
  • The board,includes improvements and better features than other similar boards,which make it the best option for developing electronics projects
  • Is a 3D rotational triangulation scanner,it uses 2 s projected over an object to capture the geometry and texture as it rotates on a turntable
  • Executes the control firmware of the motor and the s.
  • Weight:3.5KG
CNC Expansion Board, Expansion Board A4988 Driver, Motor Driver 3D Printer 3D Printer Driver For Engraver
  • PWM spindle and direction pin, 4 shaft support (X, Y, Z, A ‑ you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4)
  • Use removable A4988 or DRV8825 compatible stepping driver
  • Compact design, stepping motor can connect 4 pin connectors or be soldered
  • The extension board can be used for engraving machine or 3D printer driver
  • Compatible with GRBL 0.8. Open‑source firmware , converting G code command into stepping signal

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Open source 3d printer kit.

Rating: 3.32 of 5 - 19 votes
1 Star2 Stars3 Stars4 Stars5 Stars (19 votes, average: 3.32 out of 5)
Loading...