Objet connex500 multi material 3d printer Reviews and Best Deals

Online product reviews and comparisons for Objet connex500 multi material 3d printer.

Latest Objet connex500 multi material 3d printer
Creality Ender 3 Pro 3D Printers with Printing Resume Big Volume 220 * 220 * 250mm Flexible Removable Hotbed Building Surface
  • [MeanWell Power Supply] - We adopt the MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • [More Stable] - Redesigned with a much more sturdy, 40x40 aluminum extrusion for the Y-axis base. This provides stability for the printing process, leading to better print quality.
  • [Superior Printing Surface] - A new state of the art “C-MAG” magnetic sticker is designed for Ender 3 Pro, it is entirely removable, flexible and can better adhere to the platform. Once the model is finished printing, remove the magnetic upper from the lower and bend or flex the print surface to watch the model effortlessly pop off the printing surface.
  • [Enriched Accessories] - It must be surprising that more useful accessories included in our package. Extra parts can save you time while you need, also cost-effective.
Latest Objet connex500 multi material 3d printer
Creality CR-6 SE 3D Printer, 2020 Newest Auto level DIY Printer Kit with Silent Mainboard, Touchscreen, Meanwell Power Supply, Tempered Glass Plate and Dual Z-axis Print Size 235 x 235 x 250 mm
  • 【Leveling-Free Starter Printer】The CR-6 SE features an innovative true Leveling-Free Technology .You will no longer have the same troubles of leveling as use other printers. Creality 2020 upgraded CR 6 SE 3d printer will always help you build a pefect first layer.
  • 【A real quiet 3d printer】CR-6 SE 3d printer has a 32-bit silent motherboard, Atmega2560 control chip which helps to ensure that voltage control, fast movement, and printing in silence are a given. Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10.
  • 【Ease of Use】CR-6 SE comes almost assembled, only has 5 modular parts and 8 screws, which can be assembled within 5 minutes .Plug it in and switch it on,you can enjoy the fun of printing early than other people.With a handle added on the gantry,you can take the printer to everywhere you want.
  • 【Smooth Printing Experience】The Newly-Designed Extruder on the CR-6 SE allows for a quick and painless filament feeding and the carborundum glass bed for better adhesion and easier removal, together with the filament run-out sensor and resume printing function will keep you printing, not troubleshooting problems.
  • 【Meanwell Power Supply & Touch Screen】CR-6 SE equipped with Meanwell power supply,that can heat the hot bed to 110℃ fast and meeting the needs of long time printing .Every power supply has been checked before ship,and the power supply is concealed in the machine,making it much safer.4.3IN touch screen,provide a better user navigation experience.Professional Creality engineer provide 7*24H after-sale service,lifetime technical assistance.
Latest Objet connex500 multi material 3d printer
ANYCUBIC 3D Printer MEGA X FDM 3D Printer with Resume Print and Removable UltraBase Hotbed Platform with Free 1kg PLA Filament, Support PLA, ABS, TPU,Build Size 300X300X305mm
  • Quick Assembly: 3 steps to set up the printer with fix 12 screws and 3 cables within minutes not only to an expert user but also to beginner.
  • Large Build Volume: ANYCUBIC large 3D printer mega X comes with larger build spaces available. At 300*300*305mm, able to print models that 90% of other 3d printers could not. More space for fulfilling your fantastic idea.
  • Resume Print: One click to resume from the last recorded position when suffered power outages, no more worries about accident power off.Support print 1.75mm materials: TPU, PLA, ABS, HIPS, WOOD etc.
  • Ultrabase Platform: The MEGA X platform is covered a layer of patented microporous to provide excellent adhesion. And easy to take off the model from the platform after it cool down. It can be repeatedly used without sacrificing performance.
  • Improve Precision: The ANYCUBIC Mega X 3D printer equipped with Y Axis dual sideway and Z-axis dual screw rod design to decreases the likelihood of print errors and improve the stability of heat bed.
Latest Objet connex500 multi material 3d printer
Micro Swiss - Direct Drive Extruder for Creality CR-10 / Ender 3 V1 Printers Only with Hotend
  • Fits: Creality CR-10 / CR-10-S5 / CR-10-S4 / CR-10S / CR-10 MINI / CR-20 / CR-20 Pro / Ender 2 / 3 / 3 Pro
  • Note: This will not work on an Ender 5
Latest Objet connex500 multi material 3d printer
Dremel 3D PLA for Digilab 3D Printer (750gr spool, 1.75 mm Diameter, RFID) Valuepack White
  • Compatible with all Dremel 3D Printers
  • RFID filament recognition tag - DigiLab 3D45 3D Printer automatically adjusts settings by reading the filament RFID tag
  • Provides a very smooth surface for your 3D creations, allows for reliable, high detail prints such as cosmetic prints used in low-stress applications
  • Valuepack of 750 grams
  • Plant-based and recyclable
Latest Objet connex500 multi material 3d printer
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
DISCOUNTLatest Objet connex500 multi material 3d printer
X5SA PRO 3D Printer with Titan, Core XY Structure with OSG External Dual-axis Guide, 30P Integrated Cable, Safe for Home and Industrial Use
  • X5SA PRO is an upgraded version of X5SA: ordinary guide rails are upgraded to OSG external dual-axis guide rails to achieve industrial-level printing accuracy, smoother movement and long service life. Ordinary extruder upgraded to Titan extruder, combines 3:1 gear reduction, stable feeding, more playable, suitable for printing a variety of 1.75mm filaments, focus on optimizing the performance of printing TPU and other flexible filaments .
  • Core XY structure design, full belt drive, higher stability and printing accuracy, ensure the quality of the model; Dual Z-axis design, increase the bearing capacity of the hot bed, reduce errors in printing, and print more finely.
  • X5SA PRO DIY, providing complete parts and tools. The attached SD card provides an electronic version of the instructions and a link to the installation video. Assemble and debug by yourself, enjoy the fun of DIY assembly, possible to achieve unlimited innovation and transformation of appearance and performance, so as to meet your ideas and creativity. This process takes some time to install, debug and learn, which is quite challenging for novices, more recommended for experienced people.
  • Silent motherboard and high quality power supply. TRONXY silent motherboard adopts German imported TMC ultra-quiet motor drive chip,allowing the printer always running at low decibels (<50dB). 360W high-quality power supply, the power supply system is more stable and safe.
  • If there is any questions when installing and using the 3D printer, you can contact us.TRONXY provides 1 year warranty and lifetime technical support and 24-hour professional customer service.In case of holidays, the after-sales service will reply asap on working days.(contact us: Your Amazon Buyer Account> Click Your Account> Your Orders> Find your order and click Contact Seller)
Latest Objet connex500 multi material 3d printer
Prima Filaments PV-ABS-175-0750-DG PrimaValue 3D-Print Filament, 1.75 mm, 1 kg Spool, Dark Grey
  • When Quality Counts! You should choose PrimaValue
  • 1 kg of premium quality ABS 3D-Print material for your 1.75 mm 3D-Printer.
  • Full 1 kg, approximately 405 m of filament on each spool
  • Good roundness and tight diameter tolerance.
  • Spool Size : 200 x 80 mm , Spool Hub Diameter : 55 mm
Latest Objet connex500 multi material 3d printer
DupeOf[B000J3JI2E] Epson C13T582000 Maintenance Cartridge for Pro 3800 Stylus, Amazon Dash Replenishment Ready
  • Genuine Epson consumable
  • Maintenance tank
  • Pro 3880
  • Amazon Dash Replenishment is the smart way to print; with Dash Replenishment, your printer detects when you are low and places a smart reorder directly with Amazon
  • No subscription fees; just register to start the service

Buy Objet connex500 multi material 3d printer from all Best Online stores like Amazon, eBay and Aliexpress.

Don't miss out on the promotions for Objet connex500 multi material 3d printer, buy Objet connex500 multi material 3d printer directly online and enjoy big saving on your purchases.

On this page you will find the list of the best Objet connex500 multi material 3d printer including the technical sheet, reviews issued by people who have already purchased the product, info on the updated price and active promotions and deals in the United Kingdom (UK).

Overview


Best
ANYCUBIC Mega S 3D Printer, UltraBase Heated Build Plate + Upgrade Extruder Support 1.75mm PLA Filament, 8.27''(L) x8.27''(W) x8.07''(H) Print Size
  • Works Out Of the Box: 3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for expert users but also friendly use to beginners. The rigid metal frame can minimize the shaking to improve the print quality.
  • Upgraded Extruder Design: Taitan extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design compatible with most filaments, greatly reducing the clogging risk and improving printing accuracy.
  • Resume Print & Sesor Detection: Mega S 3D Printer can resume printing after power outage or any other unexpected stoppage.One click to resume from the last recorded position when suffering power outages. And the sensor pauses prints and sets off an alarm when you run out of filament which greatly saves time and cost , printing volume reaches 8.27 x 8.27 x 8.07 inches.
  • Anycubic Ultrabase: Patented 3D printer printing platform surface coated with patented microporous coating, with excellent adhesion when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print.
  • More Function: 1)TFT Touch Screen-As responsive as operating on the phone. 2)All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours professional customer service.
Best
Creality CR-6 SE 3D Printer, 2020 Newest Auto level DIY Printer Kit with Silent Mainboard, Touchscreen, Meanwell Power Supply, Tempered Glass Plate and Dual Z-axis Print Size 235 x 235 x 250 mm
  • 【Leveling-Free Starter Printer】The CR-6 SE features an innovative true Leveling-Free Technology .You will no longer have the same troubles of leveling as use other printers. Creality 2020 upgraded CR 6 SE 3d printer will always help you build a pefect first layer.
  • 【A real quiet 3d printer】CR-6 SE 3d printer has a 32-bit silent motherboard, Atmega2560 control chip which helps to ensure that voltage control, fast movement, and printing in silence are a given. Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10.
  • 【Ease of Use】CR-6 SE comes almost assembled, only has 5 modular parts and 8 screws, which can be assembled within 5 minutes .Plug it in and switch it on,you can enjoy the fun of printing early than other people.With a handle added on the gantry,you can take the printer to everywhere you want.
  • 【Smooth Printing Experience】The Newly-Designed Extruder on the CR-6 SE allows for a quick and painless filament feeding and the carborundum glass bed for better adhesion and easier removal, together with the filament run-out sensor and resume printing function will keep you printing, not troubleshooting problems.
  • 【Meanwell Power Supply & Touch Screen】CR-6 SE equipped with Meanwell power supply,that can heat the hot bed to 110℃ fast and meeting the needs of long time printing .Every power supply has been checked before ship,and the power supply is concealed in the machine,making it much safer.4.3IN touch screen,provide a better user navigation experience.Professional Creality engineer provide 7*24H after-sale service,lifetime technical assistance.
Best
Micro Swiss - Direct Drive Extruder for Creality CR-10 / Ender 3 V1 Printers Only with Hotend
  • Fits: Creality CR-10 / CR-10-S5 / CR-10-S4 / CR-10S / CR-10 MINI / CR-20 / CR-20 Pro / Ender 2 / 3 / 3 Pro
  • Note: This will not work on an Ender 5
Best
3D Printer,GIANTARM GEEETECH A20M 3D Printer,Mix-Color,With 2 Extruders,Quick Assembly 250 * 250 * 250 mm³, Wide Printing Area
  • Quick installation: it takes about 10 minutes to install the Z axis on the XY base plate. Simple and comfortable.
  • Stable printing platform : the new A20M uses a 3mm aluminum substrate as the printing platform, which is more stable and durable than before.
  • New Version Control Board:A20M equiped with GT2560V4.1B control board (this is the latest version of the control board). Compared with the V4.0 version, we have overcome a series of technical problems such as screen blur and motherboard heating. So the performance of the V4 .1B version is more stable.
  • Power outage recovery: Printing restarts from an unexpected power outage where it left off. Printing can be stopped at any time to change the filament or to continue printing the next day.
  • Warm tips: If you have any quality problems, please contact us in time through the Amazon platform, and we will do our best.
Best
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.

Finding the cheapest prices on products sold in the United Kingdom (UK) can be rather time consuming, so we've taken it upon ourselves to help find the best bargains on the hottest products.

We'll keep this list of deals updated regularly, so be sure to check in often and make sure to find the cheapest prices on a variety of product categories in the entire the United Kingdom (UK).

We have categorized the products in order to show the most popular and best sellers.

Objet connex500 multi material 3d printer

Here is the ranking of the best Objet connex500 multi material 3d printer, click to see reviews, details and active promotions:

Visit our section devoted to providing consumer opinions on Objet connex500 multi material 3d printer and read the reviews left by real customers, see the Objet connex500 multi material 3d printer ranking and find the store where to buy at the lowest price.

Products are classified by the votes expressed in stars and by clicking on them to access the comments and opinions section. The product reviews are a useful way to best evaluate whether to buy, or not to buy the product.

Objet connex500 multi material 3d printer New
ZHITING 2 Pack 3D Printer Heat Bed Power Module 3D Printer Board Expansion Board MOS Tube High Current Load Module
  • A general add-on heated bed power expansion module for 3D printer
  • Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8
  • With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A
  • Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.)
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board, According to the thermal power of the bed, please choose the appropriate power supply, with sufficient margin. If it is large power heated, we suggest 24V power supply, under the same power requirements, current is less than 12 v
Objet connex500 multi material 3d printer New
BIGTREETECH MMU2 DIP Filament PLA Select filament consumable port 5 colors Support TMC2209/TMC5160 Apply to prusa i3 MK3S/MK2.5S 3D Printer
  • 1. Firmware link: https://github.com/bigtreetech.
  • 2. Master chip:STM32F030C8T6.
  • 3. Used to select consumables port, Support up to 5 color printing and multiple driver models.
  • 4. Driver modes: TMC Driver-UART Mode / Driver-SPI Mode.
  • 5. 24-hour service: Don't worry about after-sales problems, please contact us if necessary, we will solve it for you.
Objet connex500 multi material 3d printer New
Monoprice Replacement Flexible Build Plate - Black for Use with All Models of The MP Voxel 3D Printer
  • This is a replacement build plate for the Moonrise Voxel 3D Printer
  • Please use care when changing the build plate, or any component, on your 3D printer.
  • Service & Support : Contact our technical support team for questions about our products, troubleshooting, or even suggestions for products to fit your particular needs.
  • You're never on your own with Moonrise products! We have a full team of friendly and knowledgeable technicians available to answer your questions
  • Quality at a Fair Price: Moonrise's rugged design and rigid quality control standards deliver high quality products at fair prices.
Objet connex500 multi material 3d printer New
Aibecy Filament 1.75mm 1kg (2.2lb) Spool 3D Printer Consumables Natural Semi-Transparent Material Refills TPU
  • TPU Rubber Based, Natural Semi-transparent Color.
  • 1KG Net (apximately 2.2 lbs) Filament with Clear Spool.
  • Reinforced Spool with Bigger Inner Diameter to Allow Smoother Pull from Extruder.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • Recommended Extrusion/Nozzle Temperature 210°C - 230°C
Objet connex500 multi material 3d printer New
Trueornot Creality V4.5.3 Motherboard 32-Bit 3D Printer Mainboard for CR-6 SE CR-6 Max 3D Printer
  • The mute motherboard with complete functions, strong usability and wide application, which is suitable for CR-6 SE, CR-6 Max, etc.
  • High quality MOS tube features better heat dissipation. Compact circuit sombination, closed inductance, antioxidant, corrosion and high temperature resistance. Stable working for hours.
  • Self-developed motherboard with strong anti-interference. Special power management chip, support 32-bit MCU, support 24V power input stability improvement. Additional ESD with high performance and low consumption.
  • Equipped with imported control chip, control and drive, faster run speed, more sensitive control system, higher printing precise, stronger performance.
  • Mainboard supports automatic leveling and material break detection. Easy to install, easy to DIY.
Objet connex500 multi material 3d printer New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Objet connex500 multi material 3d printer New
Creality CR-6 SE 3D Printer, 2020 Newest Auto level DIY Printer Kit with Silent Mainboard, Touchscreen, Meanwell Power Supply, Tempered Glass Plate and Dual Z-axis Print Size 235 x 235 x 250 mm
  • 【Leveling-Free Starter Printer】The CR-6 SE features an innovative true Leveling-Free Technology .You will no longer have the same troubles of leveling as use other printers. Creality 2020 upgraded CR 6 SE 3d printer will always help you build a pefect first layer.
  • 【A real quiet 3d printer】CR-6 SE 3d printer has a 32-bit silent motherboard, Atmega2560 control chip which helps to ensure that voltage control, fast movement, and printing in silence are a given. Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10.
  • 【Ease of Use】CR-6 SE comes almost assembled, only has 5 modular parts and 8 screws, which can be assembled within 5 minutes .Plug it in and switch it on,you can enjoy the fun of printing early than other people.With a handle added on the gantry,you can take the printer to everywhere you want.
  • 【Smooth Printing Experience】The Newly-Designed Extruder on the CR-6 SE allows for a quick and painless filament feeding and the carborundum glass bed for better adhesion and easier removal, together with the filament run-out sensor and resume printing function will keep you printing, not troubleshooting problems.
  • 【Meanwell Power Supply & Touch Screen】CR-6 SE equipped with Meanwell power supply,that can heat the hot bed to 110℃ fast and meeting the needs of long time printing .Every power supply has been checked before ship,and the power supply is concealed in the machine,making it much safer.4.3IN touch screen,provide a better user navigation experience.Professional Creality engineer provide 7*24H after-sale service,lifetime technical assistance.
Objet connex500 multi material 3d printer New
Aibecy 3D Printer LCD Resin UV Photocuring 130 * 82 * 160mm Printing Size 2K High Resolution LCD with 3.5 Inch Touchscreen Air Filtration System Off-line Print Original Creality LD-002H
  • 1620*2560 HD resolution with high print precision. 2K HD monochrome screen, the curing time of the model is 1-4s/layer, which speeds up 10% compared with similar printers.
  • Equipped with a UV integrated light source and upgraded transmission system, the light source reaches 8000uw/cm2. Stable light source decides the higher print success rate.
  • The precision z-axis linear rail ensures that every tiny movement of z-axis is accurate under the strict requirements of x-y-axis high precision.
  • Air filtering system with activated carbon, activated carbon can effectively reduce the emission of odor from resin and give you a comfortable environment.
  • Manually leveling system simplifies leveling process. 3.5 inch full color touchscreen, a simple UI interface can monitor real-time printing information, easy to operate.
Objet connex500 multi material 3d printer New
Perle C-1000MM-M2LC05 Transceiver - 2 x LC Ports - DuplexLC Port - 1000Base-SX - Internal - 5061200
  • More for the money with this high quality Product
  • Offers premium quality at outstanding saving
  • Excellent product
  • 100% satisfaction

Reviews

On this page you can find a list of products with their reviews and opinions issued by customers who have already purchased Objet connex500 multi material 3d printer. Learn directly from other people's shopping experience: they are useful to understand the quality of the product, if it really corresponds to what is going to be shipped, if there are production defects or if there is anything else that you should know. Users who release reviews on Objet connex500 multi material 3d printer give useful information not only about the purchasing experience but also about the use in real life, it is thanks to these feedback that you can learn valuable information about the product. The proposed list ranks products based on the votes received, positive opinions and relevance to the customer needs. Every product page includes product images that allow you to identify both strengths and weaknesses of the product.

Aibecy Filament 1.75mm 1kg (2.2lb) Spool 3D Printer Consumables Natural Semi-Transparent Material Refills TPU
  • TPU Rubber Based, Natural Semi-transparent Color.
  • 1KG Net (apximately 2.2 lbs) Filament with Clear Spool.
  • Reinforced Spool with Bigger Inner Diameter to Allow Smoother Pull from Extruder.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • Recommended Extrusion/Nozzle Temperature 210°C - 230°C
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Trueornot Creality V4.5.3 Motherboard 32-Bit 3D Printer Mainboard for CR-6 SE CR-6 Max 3D Printer
  • The mute motherboard with complete functions, strong usability and wide application, which is suitable for CR-6 SE, CR-6 Max, etc.
  • High quality MOS tube features better heat dissipation. Compact circuit sombination, closed inductance, antioxidant, corrosion and high temperature resistance. Stable working for hours.
  • Self-developed motherboard with strong anti-interference. Special power management chip, support 32-bit MCU, support 24V power input stability improvement. Additional ESD with high performance and low consumption.
  • Equipped with imported control chip, control and drive, faster run speed, more sensitive control system, higher printing precise, stronger performance.
  • Mainboard supports automatic leveling and material break detection. Easy to install, easy to DIY.
Aibecy 3D Printer LCD Resin UV Photocuring 130 * 82 * 160mm Printing Size 2K High Resolution LCD with 3.5 Inch Touchscreen Air Filtration System Off-line Print Original Creality LD-002H
  • 1620*2560 HD resolution with high print precision. 2K HD monochrome screen, the curing time of the model is 1-4s/layer, which speeds up 10% compared with similar printers.
  • Equipped with a UV integrated light source and upgraded transmission system, the light source reaches 8000uw/cm2. Stable light source decides the higher print success rate.
  • The precision z-axis linear rail ensures that every tiny movement of z-axis is accurate under the strict requirements of x-y-axis high precision.
  • Air filtering system with activated carbon, activated carbon can effectively reduce the emission of odor from resin and give you a comfortable environment.
  • Manually leveling system simplifies leveling process. 3.5 inch full color touchscreen, a simple UI interface can monitor real-time printing information, easy to operate.
BIGTREETECH MMU2 DIP Filament PLA Select filament consumable port 5 colors Support TMC2209/TMC5160 Apply to prusa i3 MK3S/MK2.5S 3D Printer
  • 1. Firmware link: https://github.com/bigtreetech.
  • 2. Master chip:STM32F030C8T6.
  • 3. Used to select consumables port, Support up to 5 color printing and multiple driver models.
  • 4. Driver modes: TMC Driver-UART Mode / Driver-SPI Mode.
  • 5. 24-hour service: Don't worry about after-sales problems, please contact us if necessary, we will solve it for you.

Pricing

The price list can be subject to price variations based on any discount of the day, to find the last price, simply click on the dedicated button “see Price”.

How can you get the best deal? Read and learn in order to select the most convenient offer.

The price is updated every day so you always know how much Objet connex500 multi material 3d printer actually costs.

Latest Objet connex500 multi material 3d printer
Creality Ender 3 Pro 3D Printers with Printing Resume Big Volume 220 * 220 * 250mm Flexible Removable Hotbed Building Surface
  • [MeanWell Power Supply] - We adopt the MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • [More Stable] - Redesigned with a much more sturdy, 40x40 aluminum extrusion for the Y-axis base. This provides stability for the printing process, leading to better print quality.
  • [Superior Printing Surface] - A new state of the art “C-MAG” magnetic sticker is designed for Ender 3 Pro, it is entirely removable, flexible and can better adhere to the platform. Once the model is finished printing, remove the magnetic upper from the lower and bend or flex the print surface to watch the model effortlessly pop off the printing surface.
  • [Enriched Accessories] - It must be surprising that more useful accessories included in our package. Extra parts can save you time while you need, also cost-effective.
Latest Objet connex500 multi material 3d printer
Creality CR-6 SE 3D Printer, 2020 Newest Auto level DIY Printer Kit with Silent Mainboard, Touchscreen, Meanwell Power Supply, Tempered Glass Plate and Dual Z-axis Print Size 235 x 235 x 250 mm
  • 【Leveling-Free Starter Printer】The CR-6 SE features an innovative true Leveling-Free Technology .You will no longer have the same troubles of leveling as use other printers. Creality 2020 upgraded CR 6 SE 3d printer will always help you build a pefect first layer.
  • 【A real quiet 3d printer】CR-6 SE 3d printer has a 32-bit silent motherboard, Atmega2560 control chip which helps to ensure that voltage control, fast movement, and printing in silence are a given. Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10.
  • 【Ease of Use】CR-6 SE comes almost assembled, only has 5 modular parts and 8 screws, which can be assembled within 5 minutes .Plug it in and switch it on,you can enjoy the fun of printing early than other people.With a handle added on the gantry,you can take the printer to everywhere you want.
  • 【Smooth Printing Experience】The Newly-Designed Extruder on the CR-6 SE allows for a quick and painless filament feeding and the carborundum glass bed for better adhesion and easier removal, together with the filament run-out sensor and resume printing function will keep you printing, not troubleshooting problems.
  • 【Meanwell Power Supply & Touch Screen】CR-6 SE equipped with Meanwell power supply,that can heat the hot bed to 110℃ fast and meeting the needs of long time printing .Every power supply has been checked before ship,and the power supply is concealed in the machine,making it much safer.4.3IN touch screen,provide a better user navigation experience.Professional Creality engineer provide 7*24H after-sale service,lifetime technical assistance.
Latest Objet connex500 multi material 3d printer
ANYCUBIC 3D Printer MEGA X FDM 3D Printer with Resume Print and Removable UltraBase Hotbed Platform with Free 1kg PLA Filament, Support PLA, ABS, TPU,Build Size 300X300X305mm
  • Quick Assembly: 3 steps to set up the printer with fix 12 screws and 3 cables within minutes not only to an expert user but also to beginner.
  • Large Build Volume: ANYCUBIC large 3D printer mega X comes with larger build spaces available. At 300*300*305mm, able to print models that 90% of other 3d printers could not. More space for fulfilling your fantastic idea.
  • Resume Print: One click to resume from the last recorded position when suffered power outages, no more worries about accident power off.Support print 1.75mm materials: TPU, PLA, ABS, HIPS, WOOD etc.
  • Ultrabase Platform: The MEGA X platform is covered a layer of patented microporous to provide excellent adhesion. And easy to take off the model from the platform after it cool down. It can be repeatedly used without sacrificing performance.
  • Improve Precision: The ANYCUBIC Mega X 3D printer equipped with Y Axis dual sideway and Z-axis dual screw rod design to decreases the likelihood of print errors and improve the stability of heat bed.
Latest Objet connex500 multi material 3d printer
Micro Swiss - Direct Drive Extruder for Creality CR-10 / Ender 3 V1 Printers Only with Hotend
  • Fits: Creality CR-10 / CR-10-S5 / CR-10-S4 / CR-10S / CR-10 MINI / CR-20 / CR-20 Pro / Ender 2 / 3 / 3 Pro
  • Note: This will not work on an Ender 5
Latest Objet connex500 multi material 3d printer
Dremel 3D PLA for Digilab 3D Printer (750gr spool, 1.75 mm Diameter, RFID) Valuepack White
  • Compatible with all Dremel 3D Printers
  • RFID filament recognition tag - DigiLab 3D45 3D Printer automatically adjusts settings by reading the filament RFID tag
  • Provides a very smooth surface for your 3D creations, allows for reliable, high detail prints such as cosmetic prints used in low-stress applications
  • Valuepack of 750 grams
  • Plant-based and recyclable
Latest Objet connex500 multi material 3d printer
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
DISCOUNTLatest Objet connex500 multi material 3d printer
X5SA PRO 3D Printer with Titan, Core XY Structure with OSG External Dual-axis Guide, 30P Integrated Cable, Safe for Home and Industrial Use
  • X5SA PRO is an upgraded version of X5SA: ordinary guide rails are upgraded to OSG external dual-axis guide rails to achieve industrial-level printing accuracy, smoother movement and long service life. Ordinary extruder upgraded to Titan extruder, combines 3:1 gear reduction, stable feeding, more playable, suitable for printing a variety of 1.75mm filaments, focus on optimizing the performance of printing TPU and other flexible filaments .
  • Core XY structure design, full belt drive, higher stability and printing accuracy, ensure the quality of the model; Dual Z-axis design, increase the bearing capacity of the hot bed, reduce errors in printing, and print more finely.
  • X5SA PRO DIY, providing complete parts and tools. The attached SD card provides an electronic version of the instructions and a link to the installation video. Assemble and debug by yourself, enjoy the fun of DIY assembly, possible to achieve unlimited innovation and transformation of appearance and performance, so as to meet your ideas and creativity. This process takes some time to install, debug and learn, which is quite challenging for novices, more recommended for experienced people.
  • Silent motherboard and high quality power supply. TRONXY silent motherboard adopts German imported TMC ultra-quiet motor drive chip,allowing the printer always running at low decibels (<50dB). 360W high-quality power supply, the power supply system is more stable and safe.
  • If there is any questions when installing and using the 3D printer, you can contact us.TRONXY provides 1 year warranty and lifetime technical support and 24-hour professional customer service.In case of holidays, the after-sales service will reply asap on working days.(contact us: Your Amazon Buyer Account> Click Your Account> Your Orders> Find your order and click Contact Seller)
Latest Objet connex500 multi material 3d printer
Prima Filaments PV-ABS-175-0750-DG PrimaValue 3D-Print Filament, 1.75 mm, 1 kg Spool, Dark Grey
  • When Quality Counts! You should choose PrimaValue
  • 1 kg of premium quality ABS 3D-Print material for your 1.75 mm 3D-Printer.
  • Full 1 kg, approximately 405 m of filament on each spool
  • Good roundness and tight diameter tolerance.
  • Spool Size : 200 x 80 mm , Spool Hub Diameter : 55 mm
Latest Objet connex500 multi material 3d printer
DupeOf[B000J3JI2E] Epson C13T582000 Maintenance Cartridge for Pro 3800 Stylus, Amazon Dash Replenishment Ready
  • Genuine Epson consumable
  • Maintenance tank
  • Pro 3880
  • Amazon Dash Replenishment is the smart way to print; with Dash Replenishment, your printer detects when you are low and places a smart reorder directly with Amazon
  • No subscription fees; just register to start the service

Promotions and Deals (UK)

During the year there are many promotions on products for sale online and Objet connex500 multi material 3d printer could be subject to big discounts. Promotions can be seen in the product presentation box, if a promotion is active you will see a green box with "offer".

We recommend to always click on the "see" button so that you can directly check the presence of Flash Sale Offers in the product form (offers that last only a few hours).

Cost

Below we have selected a list of Objet connex500 multi material 3d printer which are among the cheapest on the market. Just scroll through the list to find Objet connex500 multi material 3d printer the cheapest products.

Catalog

The product Objet connex500 multi material 3d printer can be found in the dedicated catalog where the entire list of products on sale is presented.

Objet connex500 multi material 3d printer is included in the 2020 catalog presentation along with the family of products belonging to the Brand.

The online catalog is updated frequently in order to provide the latest details, product inforomation and price.

Objet connex500 multi material 3d printer New
ZHITING 2 Pack 3D Printer Heat Bed Power Module 3D Printer Board Expansion Board MOS Tube High Current Load Module
  • A general add-on heated bed power expansion module for 3D printer
  • Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8
  • With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A
  • Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.)
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board, According to the thermal power of the bed, please choose the appropriate power supply, with sufficient margin. If it is large power heated, we suggest 24V power supply, under the same power requirements, current is less than 12 v
Objet connex500 multi material 3d printer New
BIGTREETECH MMU2 DIP Filament PLA Select filament consumable port 5 colors Support TMC2209/TMC5160 Apply to prusa i3 MK3S/MK2.5S 3D Printer
  • 1. Firmware link: https://github.com/bigtreetech.
  • 2. Master chip:STM32F030C8T6.
  • 3. Used to select consumables port, Support up to 5 color printing and multiple driver models.
  • 4. Driver modes: TMC Driver-UART Mode / Driver-SPI Mode.
  • 5. 24-hour service: Don't worry about after-sales problems, please contact us if necessary, we will solve it for you.
Objet connex500 multi material 3d printer New
Monoprice Replacement Flexible Build Plate - Black for Use with All Models of The MP Voxel 3D Printer
  • This is a replacement build plate for the Moonrise Voxel 3D Printer
  • Please use care when changing the build plate, or any component, on your 3D printer.
  • Service & Support : Contact our technical support team for questions about our products, troubleshooting, or even suggestions for products to fit your particular needs.
  • You're never on your own with Moonrise products! We have a full team of friendly and knowledgeable technicians available to answer your questions
  • Quality at a Fair Price: Moonrise's rugged design and rigid quality control standards deliver high quality products at fair prices.
Objet connex500 multi material 3d printer New
Aibecy Filament 1.75mm 1kg (2.2lb) Spool 3D Printer Consumables Natural Semi-Transparent Material Refills TPU
  • TPU Rubber Based, Natural Semi-transparent Color.
  • 1KG Net (apximately 2.2 lbs) Filament with Clear Spool.
  • Reinforced Spool with Bigger Inner Diameter to Allow Smoother Pull from Extruder.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • Recommended Extrusion/Nozzle Temperature 210°C - 230°C
Objet connex500 multi material 3d printer New
Trueornot Creality V4.5.3 Motherboard 32-Bit 3D Printer Mainboard for CR-6 SE CR-6 Max 3D Printer
  • The mute motherboard with complete functions, strong usability and wide application, which is suitable for CR-6 SE, CR-6 Max, etc.
  • High quality MOS tube features better heat dissipation. Compact circuit sombination, closed inductance, antioxidant, corrosion and high temperature resistance. Stable working for hours.
  • Self-developed motherboard with strong anti-interference. Special power management chip, support 32-bit MCU, support 24V power input stability improvement. Additional ESD with high performance and low consumption.
  • Equipped with imported control chip, control and drive, faster run speed, more sensitive control system, higher printing precise, stronger performance.
  • Mainboard supports automatic leveling and material break detection. Easy to install, easy to DIY.
Objet connex500 multi material 3d printer New
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Objet connex500 multi material 3d printer New
Creality CR-6 SE 3D Printer, 2020 Newest Auto level DIY Printer Kit with Silent Mainboard, Touchscreen, Meanwell Power Supply, Tempered Glass Plate and Dual Z-axis Print Size 235 x 235 x 250 mm
  • 【Leveling-Free Starter Printer】The CR-6 SE features an innovative true Leveling-Free Technology .You will no longer have the same troubles of leveling as use other printers. Creality 2020 upgraded CR 6 SE 3d printer will always help you build a pefect first layer.
  • 【A real quiet 3d printer】CR-6 SE 3d printer has a 32-bit silent motherboard, Atmega2560 control chip which helps to ensure that voltage control, fast movement, and printing in silence are a given. Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10.
  • 【Ease of Use】CR-6 SE comes almost assembled, only has 5 modular parts and 8 screws, which can be assembled within 5 minutes .Plug it in and switch it on,you can enjoy the fun of printing early than other people.With a handle added on the gantry,you can take the printer to everywhere you want.
  • 【Smooth Printing Experience】The Newly-Designed Extruder on the CR-6 SE allows for a quick and painless filament feeding and the carborundum glass bed for better adhesion and easier removal, together with the filament run-out sensor and resume printing function will keep you printing, not troubleshooting problems.
  • 【Meanwell Power Supply & Touch Screen】CR-6 SE equipped with Meanwell power supply,that can heat the hot bed to 110℃ fast and meeting the needs of long time printing .Every power supply has been checked before ship,and the power supply is concealed in the machine,making it much safer.4.3IN touch screen,provide a better user navigation experience.Professional Creality engineer provide 7*24H after-sale service,lifetime technical assistance.
Objet connex500 multi material 3d printer New
Aibecy 3D Printer LCD Resin UV Photocuring 130 * 82 * 160mm Printing Size 2K High Resolution LCD with 3.5 Inch Touchscreen Air Filtration System Off-line Print Original Creality LD-002H
  • 1620*2560 HD resolution with high print precision. 2K HD monochrome screen, the curing time of the model is 1-4s/layer, which speeds up 10% compared with similar printers.
  • Equipped with a UV integrated light source and upgraded transmission system, the light source reaches 8000uw/cm2. Stable light source decides the higher print success rate.
  • The precision z-axis linear rail ensures that every tiny movement of z-axis is accurate under the strict requirements of x-y-axis high precision.
  • Air filtering system with activated carbon, activated carbon can effectively reduce the emission of odor from resin and give you a comfortable environment.
  • Manually leveling system simplifies leveling process. 3.5 inch full color touchscreen, a simple UI interface can monitor real-time printing information, easy to operate.
Objet connex500 multi material 3d printer New
Perle C-1000MM-M2LC05 Transceiver - 2 x LC Ports - DuplexLC Port - 1000Base-SX - Internal - 5061200
  • More for the money with this high quality Product
  • Offers premium quality at outstanding saving
  • Excellent product
  • 100% satisfaction

Where to buy?

If you are asking yourself where to buy Objet connex500 multi material 3d printer? Buy online or directly in a shop?

  1. Online The advantages of online stores are the immediate availability of Objet connex500 multi material 3d printer, you can receive the products directly at home by courier (sometimes even without shipping costs). Online you can also consult the technical sheets that show the details and read the opinions of the users who have tried it.
  2. Physical Store In a physical store instead you can try the product with your own hands, you can directly see Objet connex500 multi material 3d printer and how it works and therefore have a clear idea on the purchase you are going to make. In some cases you can receive information from the experts in the store and then evaluate further information and features. We can basically say that buy online means savings. Most of the time online shops sells at higher prices.

Objet connex500 multi material 3d printer may be available or on arrival, only in some cases it will no longer be available; it suffice to read the details of the product card to see if it will return for sale soon. The advantage of Amazon is that of be able to count on Prime , the service that reduces costs making shipping free in many cases. Ebay on the other hand can rely on the guarantee of those who choose paypal as a payment method and different ads from Objet connex500 multi material 3d printer used.

Discounts and Coupons in the United Kingdom (UK)

If you are already considering buying on Amazon, we advise you to take a look at the Amazon Discount Coupon page so you can get an additional price discount. All you have to do is use the discount coupon to reduce the cost of your purchest and then get Objet connex500 multi material 3d printer at a lower price. Click on the link above to see the procedure that allows you to get this additional discount.

Aibecy Filament 1.75mm 1kg (2.2lb) Spool 3D Printer Consumables Natural Semi-Transparent Material Refills TPU
  • TPU Rubber Based, Natural Semi-transparent Color.
  • 1KG Net (apximately 2.2 lbs) Filament with Clear Spool.
  • Reinforced Spool with Bigger Inner Diameter to Allow Smoother Pull from Extruder.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
  • Recommended Extrusion/Nozzle Temperature 210°C - 230°C
Creality Ender 3 Max Upgraded 3D Printer Large Build Volume High Precision 3D Printer Kit Integrated Structure Support Silent Printing with Meanwell Power Supply 300x300x340mm
  • 【Integrated Structure Design】: The alumina frame and the H-shape metal base construct the stable integrated machine structure that is both practical and artistic. almost assembled, which takes only a few minutes to assemble it.
  • 【Linear Pulley System & Dual Cooling Fans】: Adopts special Z-axis precision T-screw rod, V-profiles and linear pulley system, quiet operation throughout the process, smooth motion and stable printing. Dual cooling fans, effective in heat dissipation.
  • 【All-metal Extruder & Carborundum Glass Platform】: All-metal bowden extruder is powerful and smooth in filament feed-in. The Carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.
  • 【Resume Printing Function & Filament Breakage Detector】: The printer can save the printing record when power-off, and continue printing when the power is back again. Auto stop the print when the filaments run out or break.
  • 【Safe Power Supply & TMC2208 Silent Driver】: Powerful power supply, safe and stable to use. X-axis and Y-axis adopts TMC2208 driver chip, brings comfortable and silence work environment for you. It can heat the hot bed to 110℃ in around 10 minutes.
Trueornot Creality V4.5.3 Motherboard 32-Bit 3D Printer Mainboard for CR-6 SE CR-6 Max 3D Printer
  • The mute motherboard with complete functions, strong usability and wide application, which is suitable for CR-6 SE, CR-6 Max, etc.
  • High quality MOS tube features better heat dissipation. Compact circuit sombination, closed inductance, antioxidant, corrosion and high temperature resistance. Stable working for hours.
  • Self-developed motherboard with strong anti-interference. Special power management chip, support 32-bit MCU, support 24V power input stability improvement. Additional ESD with high performance and low consumption.
  • Equipped with imported control chip, control and drive, faster run speed, more sensitive control system, higher printing precise, stronger performance.
  • Mainboard supports automatic leveling and material break detection. Easy to install, easy to DIY.
Aibecy 3D Printer LCD Resin UV Photocuring 130 * 82 * 160mm Printing Size 2K High Resolution LCD with 3.5 Inch Touchscreen Air Filtration System Off-line Print Original Creality LD-002H
  • 1620*2560 HD resolution with high print precision. 2K HD monochrome screen, the curing time of the model is 1-4s/layer, which speeds up 10% compared with similar printers.
  • Equipped with a UV integrated light source and upgraded transmission system, the light source reaches 8000uw/cm2. Stable light source decides the higher print success rate.
  • The precision z-axis linear rail ensures that every tiny movement of z-axis is accurate under the strict requirements of x-y-axis high precision.
  • Air filtering system with activated carbon, activated carbon can effectively reduce the emission of odor from resin and give you a comfortable environment.
  • Manually leveling system simplifies leveling process. 3.5 inch full color touchscreen, a simple UI interface can monitor real-time printing information, easy to operate.
BIGTREETECH MMU2 DIP Filament PLA Select filament consumable port 5 colors Support TMC2209/TMC5160 Apply to prusa i3 MK3S/MK2.5S 3D Printer
  • 1. Firmware link: https://github.com/bigtreetech.
  • 2. Master chip:STM32F030C8T6.
  • 3. Used to select consumables port, Support up to 5 color printing and multiple driver models.
  • 4. Driver modes: TMC Driver-UART Mode / Driver-SPI Mode.
  • 5. 24-hour service: Don't worry about after-sales problems, please contact us if necessary, we will solve it for you.

Similar Products

Depending on your needs and brand preferences, there are several interesting alternative products or similar products that can perform the same function within certain limits. By reading the reviews and opinions of these products you can understand if they can actually be a choice to consider as an alternative to Objet connex500 multi material 3d printer.

Rating: 3.53 of 5 - 17 votes
1 Star2 Stars3 Stars4 Stars5 Stars (17 votes, average: 3.53 out of 5)
Loading...